RUPTURE DISC HOLDER IG-HL - REMBE GmbH · 2018. 2. 27. · The IG-HL rupture disc holder is a flat...
2
PRODUCT INFORMATION GBPI-IG-HL-16158/0 | © REMBE | All rights reserved | Valid from 26.02.2018 | Subject to technical changes without notice RUPTURE DISC HOLDER IG-HL for forward acting rupture discs BT-HL, ODV-HL, STAR Your advantages • Full metal seal for excellent leak tightness. • Easy to install. • Fits all standard flange sizes, customised designs possible. • Available in a wide range of materials. The unique design of the IG-HL rupture disc holder always guarantees the correct mounting of the rupture disc. Fully metallic clamping creates the seal. The rupture disc is therefore not damaged during sealing and can be reinstalled if removed as part of an inspection. 01/02 Made in Germany *Replaces DIN 2632 and following Continued on page 2 The IG-HL rupture disc holder is a flat seat holder for tension loaded rupture discs. The seat of the rupture disc is especially suited to medium and high pressures. The holder outlet has a slight radius to which the rupture disc is adapted. This guarantees the perfect fit of the rupture disc and maintains its optimal opening. Ø A H Diameter of the rupture disc holder Installation height Ø Technical data EN 1092-1* ASME B16.5 (< DN 600) / ASME B16.47 (> DN 600) NPS [in] DN [mm] Pressure class PN Ø A [mm] H [mm] NPS [in] Pressure class ANSI Ø A [mm] H [mm] H** [mm] ½" 15 10 – 40 51 44 ½“ 150 44 44 58 64 (63) – 160 61 300/600 50 250 72 900/1500 60 ¾" 20 10 – 40 61 46 2500 66 64 (63)/100 72 ¾“ 150 53 46 60 1" 25 10 – 40 71 46 300/600 63 64 (63) – 160 82 900/1500 66 250 83 2500 73 1½" 40 10 – 40 92 53 1" 300/600 69 46 60 64 (63) – 160 103 900/1500 76 250 109 2500 82 2" 50 10 – 40 107 53 1½" 300/600 92 53 70 64 (63) 113 900 95 100/160 119 1500 95 250 124 2500 114
Transcript of RUPTURE DISC HOLDER IG-HL - REMBE GmbH · 2018. 2. 27. · The IG-HL rupture disc holder is a flat...
PRODUCT INFORMATION
GB
PI-I
G-H
L-16
158/
0 | ©
REM
BE
| All
righ
ts re
serv
ed |
Valid
from
26.
02.2
018
| Sub
ject
to
tech
nica
l cha
nges
wit
hout
not
ice
RUPTURE DISC HOLDER IG-HL
for forward acting rupture discsBT-HL, ODV-HL, STAR
Your advantages• Full metal seal for excellent leak tightness.
• Easy to install.
• Fits all standard flange sizes, customised designs possible.
• Available in a wide range of materials.
The unique design of the IG-HL rupture disc holder always guarantees the correct mounting of the rupture disc. Fully metallic clamping creates the seal. The rupture disc is therefore not damaged during sealing and can be reinstalled if removed as part of an inspection.
01/02
MadeinGermany
*Replaces DIN 2632 and following
Continued on page 2
The IG-HL rupture disc holder is a flat seat holder for tension loaded rupture discs. The seat of the rupture disc is especially suited to medium and high pressures. The holder outlet has a slight radius to which the rupture disc is adapted. This guarantees the perfect fit of the rupture disc and maintains its optimal opening. Ø A
HDiameter of the rupture disc holderInstallation height
Ø
Technical data
EN 1092-1* ASME B16.5 (< DN 600) / ASME B16.47 (> DN 600)
NPS[in]
DN[mm]
Pressure class PN
Ø A[mm]
H[mm]
NPS[in]
Pressure class ANSI
Ø A[mm]
H[mm]
H**[mm]
½" 15
10 – 40 51
44½“
150 44
44 5864 (63) – 160 61 300/600 50
250 72 900/1500 60
¾" 2010 – 40 61
462500 66
64 (63)/100 72
¾“
150 53
46 601" 25
10 – 40 71
46
300/600 63
64 (63) – 160 82 900/1500 66
250 83 2500 73
1½" 40
10 – 40 92
53 1"
300/600 69
46 6064 (63) – 160 103 900/1500 76
250 109 2500 82
2" 50
10 – 40 107
53 1½"
300/600 92
53 7064 (63) 113 900 95
100/160 119 1500 95
250 124 2500 114
Gallbergweg 21 | 59929 Brilon, Germany | T +49 2961 7405-0 | F +49 2961 50714 [email protected] | www.rembe.de
PRODUCT INFORMATION
Consulting. Engineering. Products. Service.
02/02
GB
PI-I
G-H
L-16
158/
0 | ©
REM
BE
| All
righ
ts re
serv
ed |
Valid
from
26.
02.2
018
| Sub
ject
to
tech
nica
l cha
nges
wit
hout
not
ice
*Replaces DIN 2632 and following **Ring Type Joint Face
Technical data
EN 1092-1* ASME B16.5 (< DN 600) / ASME B16.47 (> DN 600)
NPS[in]
DN[mm]
Pressure class PN
Ø A[mm]
H[mm]
NPS[in]
Pressure class ANSI
Ø A[mm]
H[mm]
H**[mm]
2½"
65
10 – 40 127
57
2"
300/600 107
53
70 100/160 144 900/1500 139
250 154 2500 143
3"
80
10 – 40 142 57
2½"
300/600 127
57
76 64 (63) 148 900/1500 162
100/160 154 2500 165
250 170 3"
300/600 146 57
76
4"
100
10/16 162 60
900 165
25/40 167 1500 171
100/160 180 2500 193
250 202
4“
300 177
60
86
6"
150
10/16 217
76
600 190
25/40 223 900 203
100/160 257 1500 206
8"
200
10/16 272 85
2500 232
25 283
5"
300 212
63
89
40 290 600 238
100/160 324 900 244
10"
250
10/16 328 85
1500 251
25 340 2500 276
40 352
6"
150 219
76
92 64 (63) 364 300 247
12"
300
10 378 92
600 263
16 384 8"
300 304 85
111
25 400 600 317
40 417 10"
150 336 85
111
14"
350
10 438
100
300 358
16 443 12"
150 406 92
118
25 457 300 419
16"
400
10 489
105
14"
150 447 100
126
16 496 300 482
25 514 16"
150 511 105
131
20"
500
10 594 116
300 536
16 617 18"
150 546 110
136
24"
600
10 695 126
300 593
16 734 20"
150 603 116
136
300 650
24"
150 714 126
148
300 771
![Mini Valves and Rupture Disc holders€¦ · The valve is also available with an Integral Rupture Disc (1,800 psi [124 bar] rated). Rupture Disc holders are available with or without](https://static.fdocuments.us/doc/165x107/5e801c8f97a0ef3263211e31/mini-valves-and-rupture-disc-holders-the-valve-is-also-available-with-an-integral.jpg)
