Running Magnet 2.0 Recessed - FLOS ArchitecturalFixture Type Job Name Running Magnet 2.0 Recessed...
Transcript of Running Magnet 2.0 Recessed - FLOS ArchitecturalFixture Type Job Name Running Magnet 2.0 Recessed...
Fixture Type
Job Name
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
Description
Fun with magnets and light. Simultaneously graphic and subtle, the Running Magnet isflexible, precise, and as creative as you. It is track lighting redesigned and elegantly refined.Light elements snap in place and connect automatically though the magic of magnets.Extruded aluminum housings create a clean 1-3/8-inch slot and preconfigured cornerscomplete the system that can run up, around and across walls and ceilings. Finishes alignperfectly, always, because Running Magnet can be easily cut on site. Linear LED and accentfixtures, available in a variety of sizes, can be exchanged and repositioned quickly, withouttools, with artistic results. The Running Magnet is perfect for retail displays where frequentchanges are typical and absolute performance is mandatory.
Lamps
Mini Glo-ball: 7W, 800lm, 2700K, CRI 807W, 880lm, 3000K, CRI 80
Mini Glo-Ball S:3.5W, 400lm, 2700K, CRI 803.5W, 440lm, 3000K, CRI 80
Find Me Suspension: 8W, 560lm, 2700K, CRI 908W, 600lm, 3000K, CRI 90
Spot Module:8W, 600lm, 3000K, CRI 908W, 550lm, 2700K, CRI 90
Light Strip, 11.8’’:5W, 460lm, 3000K, CRI 905W, 435lm, 2700K, CRI 90
Light Strip 23.6’’:10W, 920lm, 3000K, CRI 9010W, 870lm, 2700K, CRI 90
Light Strip 35.4’’:15W, 1380lm, 3000K, CRI 9015W, 1305lm, 2700K, CRI 90
Light Strip 47.2’’:20W, 1840lm, 3000K, CRI 9020W, 1740lm, 2700K, CRI 90 Spot 120:12.5W, 1060lm, 3000K, CRI9012.5W, 985lm, 2700K, CRI90
Construction
Extruded aluminum housing with integral DALI controllable track system.
Flanges for 1/2” or 5/8”.
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 1 of 7
For more information contact your representative or go to architectural.FlosUSA.com. ©2017 Specifications and dimensions subject to change without notice. Issued 03.04.2017
Photometrics
For current IES files please visitarchitectural.flosusa.com
Electrical
24V electrical systemlimited to a maximumload of 4A and 100W per driver.
Spot and linear luminaires available withindividually addressable DALI circuitry orbuilt-in dimmer on each fixture head.
EC to supply site cabling from driver to tracklocation and site UL listed enclosure.
Notes
Consult factory for other ceiling typesincluding accoustic tile ceilings and wood.
Listings: UL Listed, IP20 dry location only, Class 2, CA Title 24 compliant.
Recessed Profile
Trimless extruded aluminum profile to berecessed in sheet rock ceilings and walls(1/2” or 5/8” thick).
Linear profiles available as feed profiles toconnect to a driver and intermediate profilesto fill in remaining lengths.
Each feed profile comes with two end caps.
Available lengths: 39.4”, 59”, and 78.7”
All linear profiles are field cuttable.
Corners available for continuous runs.
Track can be powered through corners.
Corners are not field cuttable.
Warranty
2 years from date of sale.
Fixture Type
Job Name
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
2.0‘‘[51.7mm]
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 2 of 7
For more information contact your representative or go to architectural.FlosUSA.com. ©2017 Specifications and dimensions subject to change without notice. Issued 03.04.2017
Luminaries
Profiles
Corners
The extruded aluminum housing creates a clean 1/2” slot that can be run up, around and across walls and ceilings. Vertical and horizontal corners complete thesystem. The magnetic luminaries are simply installed by insertion. Linear tracks are available in two versions: power feed profiles for connecting to a driver, andintermediate profiles. End caps and connection cables are included with each power feed profile. Internal foam for opening support should not be removed untilafter installation.
Horizontal corners available for 90° turns in the same plane, inside corner to transition from wall to ceiling or from wall to wall and external corners to transition from wall to wall surfaces or around soffits. Corners are prepared to feed a structure in both directions without the need of a feed profile.
Length
FEED INTERMEDIATE (SEE TABLE)
Part Number FeedUnit Profile
06.1639.14.9059’’ (1.5m)
06.1640.14.9078.7 (2m)
06.1638.14.9039.4’’ (1m)
06.1644.14.90
06.1645.14.90
06.1643.14.90
Part NumberIntermediate Profile
Both profile types can be cut to different lengths in field.
Horizontal Corner
06.1648.14.90 06.1650.14.90 06.1651.14.90
Inside Corner Outside Corner
3.4
‘‘[8
6 m
m]
1.4‘‘[35.0 mm]
4.3‘‘[109.1 mm]
7.7‘‘
[195mm]
8.8‘‘
[223mm]
3.1‘‘
[78mm]
3.1‘‘[78mm]
7.7‘‘[195mm]
8.8‘‘[223mm]
Light Strip Module HE Find Me SuspensionSpot 120Spot Module Mini Glo-Ball
• Linear Hight Efficency LED can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically with magnets• Built-in dimming switch dims fixture with allen key from 20-100%• Clear end caps included for continuous look when installing end-to-end
• Accent LED Spot modules can be rapidly exchanged and repositioned without tools. • Light elements are quick to position and connect automatically with magnets• Built-in dimming knob dims fixture from 20-100%• Standard beam spread is 14°• Additional interchangeable lenses available in 27° and 36°, and 10° x 42° elliptical beam spread
• Decorative modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect with magnets• Built-in dimming knob allows fixture to dim from 20-100%
• Accent lighting LED module to be installed in The Running Magnet 2.0 System• Built-in DC/DC electronic voltage converter.• Built-in dimming knob dims fixture from 39-100%• Standard beam spread are 24º and 33º• Honeycomb and cross baffle included
Fixture Type
Job Name
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 3 of 7
For more information contact your representative or go to architectural.FlosUSA.com. ©2017 Specifications and dimensions subject to change without notice. Issued 03.04.2017
Optional Profile Mounting Kits
Drivers
Fixed Low-Clearance Mounting Kit ( 2 units)
End Cap kit ( 2 units)
LED Driver- 96W Optronic 24V Driver,no dimming wire configuration
Add Lunatone 0-10V to Dali converter for dimming installation
Splice Box
08.8866.14
08.8865.14A
08.8867.14Adjustable Ceiling Kits (2 units)
For easier installation without blocking rough-in.
FIXED CEILING KIT
[2 PER 500mm]
ADJUSTABLE CEILING KIT
[2 PER] M6 THREADED ROD
(BY OTHERS)
0.6‘‘
LED96W24V-Non-Dim 60.9091 SP-24V-96W-Non-Dim
13‘‘
[347mm]
2.2‘‘[59mm]
1.7‘‘[46mm]
Profile Quantities Ceiling kit
2
3
1000 mm/ 1500 mm [39.37’’ / 59.06’’]
2000 mm [78.74’’]
Fixture Type
Job Name
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 4 of 7
For more information contact your representative or go to architectural.FlosUSA.com. ©2017 Specifications and dimensions subject to change without notice. Issued 03.04.2017
Light Strip Module HE
Spot Module
CCT CRI
90
90
90
90
3000
2700
3000
2700
3000
2700
3000
2700
460
920
1380
1840
435
870
1305
1740
5
10
15
20
03.7001.14.90
03.7000.14.90
03.7001.14.DD
03.7000.14.DD
03.7003.14.90
03.7002.14.90
03.7003.14.DD
03.7002.14.DD
03.7005.14.90
03.7004.14.90
03.7005.14.DD
03.7004.14.DD
03.7007.14.90
03.7006.14.90
03.7007.14.DD
03.7006.14.DD
11.8’’ (300mm)
23.6’’ (600mm)
35.4’’ (900mm)
47.2’’ (1200mm)
Initial Lumen Watts Part Number Non dimmingLight Strip Lenght Part Number DALI - Dimming
6.7‘‘[170.2 mm]
4.8
‘‘
ø 1.3‘‘
[121
mm
]
[34 mm]
Linear High Efficency LED can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically with magnets. Built-in dimming knob dims fixture from 20-100%. Clear end caps included for continuous look when installing end-to-end.
Accent LED Spot modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically with magnets.Built-in dimming knob dims fixture from 20-100%. Standard beam spread is 14°. Additional interchangeable lenses available in 27° and 36°, and 10° x 42° elliptical beam spread.
90º
360º
Optional Accessories
08.8760.00
08.8761.00
08.8759.00
08.8427.14
Flood Lens Accessory 23°
Wide Flood Lens Accessory 33°
Elliptical Lens Accessory
Extra long snoot for added shielding in aluminum with black finish (does not protude from channel when tucked up into housing)
CCT CRI
90
90
3000
2700
600
550
14º
14º
03.6302.14A90 03.6302.14ADD
03.6303.14A90 03.6303.14ADD
Initial Lumen
BeamSpread
Part Number Built in-20-100% Dimming
Part Number DALI-Dimming
Photometric
30°
60°
90°
30°
60°
90°
6199 Cd/Klm
E(lx/Klm)D (m)
h(m) 21°
1
2
3
4
5
6199
1550
689
387
248
0.37
0.74
1.11
1.48
1.85
2.8
‘‘1.
3‘‘
[72
mm
][3
4 m
m]SEE TABLE
5.07‘‘[129 mm]
Fixture Type
Job Name
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 5 of 7
For more information contact your representative or go to architectural.FlosUSA.com. ©2017 Specifications and dimensions subject to change without notice. Issued 03.04.2017
Multi Spot 4
Spot 120
Accent lighting LED module to be installed in The Running Magnet 2.0 System. Built-in DC/DC electronic voltage.
Optional Accessories
08.8760.00
08.8761.00
08.8759.00
Flood Lens Accessory 20°
Wide Flood Lens Accessory 30°
Elliptical Lens Accessory
CCT
CCT
CRI
CRI
90
90
90
90
90
90
3000
2700
2700
3000
3000
3000
4x 210
985
985
4x 210
1060
1060
10º
24º
33º
10º
24º
33º
03.6306.14.90
03.6285.14.90
03.6285.40.90
03.6285.14.DD
03.6285.40.DD
03.6284.14.DD
03.6284.40.DD
03.6286.14.DD
03.6286.40.DD
03.6287.14.DD
03.6287.40.DD
03.6284.14.90
03.6284.40.90
03.6286.14.90
03.6286.40.90
03.6287.14.90
03.6287.40.90
03.6306.14.DD
03.6305.14.90 03.6305.14.DD
Initial Lumen
Initial Lumen
BeamSpread
BeamSpread
Part Number Built in-20-100% Dimming
Part Number Built in-20-100% Dimming
Part Number DALI-Dimming
Finish
Photometric
Part Number DALI-Dimming
30°
60°
90°
30°
60°
90°
6199 Cd/Klm
E(lx/Klm)D (m)
h(m) 21°
1
2
3
4
5
6199
1550
689
387
248
0.37
0.74
1.11
1.48
1.85
2.7‘‘
2.7‘
‘
2.7‘‘
2.7‘‘
1.3‘‘
ø 1.3‘‘
4.8‘‘
4.8‘‘
[69
mm
]
[22m
m]
[40
mm
]
[200
mm
]
[33 mm]
[46 mm]
[121 mm]
[130 mm]
4.7‘‘[119 mm]
14 = Black
40 = White
14 = Black
40 = White
14 = Black
40 = White
14 = Black
40 = White
Fixture Type
Job Name
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 6 of 7
For more information contact your representative or go to architectural.FlosUSA.com. ©2017 Specifications and dimensions subject to change without notice. Issued 03.04.2017
Other Light Module
Mini Glo - Ball S
Mini Glo -Ball
Find Me Suspension
Decorative modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically through the magic ofmagnets. Built-in dimming knob allows fixture to dim from 20-100%.
CCT
CCT
CRI
CRI
80
80
90
90
3000
2700
3000
2700
3000
3000
880
440
600
560
800
400
7
3.5
8
8
03.6261.14B90
03.6260.14B90
03.6263.14B90
03.6262.14B90
03.6273.30C90
03.6273.14C90
03.6273.06C90
03.6272.30C90
03.6272.14C90
03.6272.06C90
03.6261.14.DD
03.6260.14.DD
03.6263.14.DD
03.6262.14.DD
03.6273.30CDD
03.6273.14CDD
03.6273.06CDD
03.6272.30CDD
03.6272.14CDD
03.6272.06CDD
Initial Lumen
Initial Lumen
Watts
Watts Finish
Part Number Built-in Dimming
Part Number Built-in Dimming
Part Number DALI-Dimming
Part Number DALI-Dimming
2.8‘‘
2.5‘‘
2.5‘‘
3.3‘‘
118‘‘
118‘‘
3.5‘‘
8.7‘‘
ø 4.3‘‘
ø 4.3‘‘
ø 1.3‘‘
[70.9 m
m]
[64
.1 mm
]
[64
.1 mm
]
[84
.8 m
m]
[300
0 m
m]
MA
X.
[300
0 m
m]
MA
X.
[89.5 m
m]
[220 m
m]
[110 mm]
[110 mm]
[33 mm]
5.07‘‘[129 mm]
Mini Glo - Ball S
Find Me Suspension
14 = Black
06 = Chrome
30 = White
14 = Black
06 = Chrome
30 = White
5.07‘‘[129 mm]
5.07‘‘[129 mm]
Fixture Type
Job Name
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Page 7 of 7
For more information contact your representative or go to architectural.FlosUSA.com. ©2017 Specifications and dimensions subject to change without notice. Issued 03.04.2017
How to Specify
A. Select and position corners
1. Horizontal - Connect sections on flat surfaces (90º corner) 2. Inside - Transition from wall to ceiling (inside corner) 3. External - Turn outside corners for walls and soffits (270° corner)
B. Fill lengths between corners with Linear Housings
3’ or 6’ sections can be specified as feed or intermediate profiles. Profile can be easily cut to site to exact length and joined together.
C. Drivers
Quantity of drivers determined by total wattage or light elements in section (approximately one every 10 feet). Maximum driver distance is 15’. Locate drivers nearby. DALI dimming hardwires into profile, bypasses driver.
D. Select Spot heads
Linear strips are available in five nominal lengths: 1’, 2’, 3’, 4’ and 5’. Individual units can be adjusted from 20-100% with on board switch.
Visit FLOS Worldwide YouTube channel for installation videos