Rs Cmd57 Sys1

Mobile Radio Measurements 30

Contents Overview R&S AddressesType IndexChapter Overview


Brief description

Digital Radiocommunication Testers CMD 54/57/59 are advanced top- class instruments for measurements on base stations (BTS) and BTS modules.

CMD 54 is designed for measure-ments in line with: GSM900 E-GSM UIC

European train radiotelephony

CMD 57 additionally covers the fol-lowing standards: GSM1800 GSM1900 optionally

CMD59 is designed for measure-ments exclusively in GSM1900 band.

The main applications are: Module testing in production Final testing with Abis control Installation with Abis control Service with test mobile

functionality

CMD is the first compact radiocommu-nication tester worldwide allowing measurements on transmitters and receivers of base stations without affecting telephone calls in progress.

These testers combine compact size with high measurement accuracy and speed. They are suitable both for sta-tionary and mobile use and feature great ease of operation and high reli-ability.

Operation is extremely easy and requires no detailed GSM knowledge. The high-contrast LCD display with softkeys on both sides allows menu- guided convenient callup of test rou-tines.

CMD57

Digital Radiocommunication Testers CMD54, CMD57, CMD59

For production, installation and

service of GSM900/1800/

1900 base stations

The key features at a glance

Characteristic/function Benefit/application

Transmitter measurements

Dynamic range >72 dB Checking the power ramps and output spectrum of the BTS transmitter for compliance with the dynamic range specified by GSM

Measurement of power ramps Checking the switching characteristics of the BTS transmitter

Phase and frequency error Testing the modulation characteristics of the BTS transmitter including statistical func-tion

Extremely fast measurement of spectrum due to modulation or switching

Detecting interference to the BTS transmitter at adjacent frequencies, due to modula-tion or switching

Receiver measurements

Measurement of bit error rate (BER) via Abis/IEEE bus/RS-232-C interface, BTS loopback or CMD loopback

Testing the BTS receiver characteristics by adaptation to specific implementation in the BTS

Measurement of adjacent timeslot rejection with up to 50 dB higher level

Measuring the automatic gain control (AGC) of the BTS with high level difference between used and adjacent timeslot; simulation of different BTS receive levels

12




Overview of options and extras

Designation Brief description, recommendation Option Order No.

OCXO Reference Oscillator For measurements with exacting requirements on frequency stability. Ensures high absolute accuracy, minimum temperature- dependent drift and especially high long-term stability

CMD-B1 1059.6002.02

IQ Modulator Output For BER measurement on BTS receivers under conditions of fading (appli-cation note 1MA04_0E available on request). Generator/fading simulator SMIQ can be connected. Not useable with CMD-B8 and CMD-B2 together, but with CMD-B8 or CMD-B2 (only CMD59)

CMD-B17 1099.3003.02

DCS1900 Base Station Test For testing DCS1900 base stations (only CMD54/57) CMD-B19 1059.6201.02

OCXO Reference Oscillator For highly demanding requirements on frequency stability. Oven crystal with highest long-term stability. Aging 3.5 10 - 8

CMD-B2 1059.8604.02

DC Voltmeter/Ammeter Specific voltage and current measurements (only for CMD59) CMD-B20 1059.6401.02

Reference Frequency Inputs/Outputs

For synchronizing DUT and measuring instrument with internal or external frequencies

CMD-B3 1051.6202.02

AF Measurement Unit with Frequency Counter

This option includes an AF generator, a voltmeter, a distortion meter and a frequency counter for measurements on the audio interface or on modules. CMD-B41 permits measurements up to 60 MHz as are required for LO alignment

CMD-B41 1051.6902.02

Realtime Speech Coder/Decoder

This option converts digital speech signals into analog signals (and vice versa) (in conjunction with CMD-K1x, CMD-K30 or CMD-B8)

CMD-B5 1051.8657.02

Adapter for CMD-B6xOptions

Required for operating the options CMD-B61 and CMD-B62 CMD-B6 1051.7409.02

IEC/IEEE-Bus Interface Alternative to standard RS-232-C interface for remote control of CMD CMD-B61 1051.7609.02

Memory Card Interface Memory cards are a versatile medium for storing instrument settings CMD-B62 1051.8205.02

Abis Interface For sensitivity measurments; required for Abis control. Abis card for BER measurements at this interface

CMD-B7 1051.8357.02

Level error




Test Mobile Functionality Adds signalling software, SIM card reader and selective filter to the basic model (CMD-B6 required, not usable with CMD-B2 and CMD-B17)

CMD-B8 1059.8204.02

Abis Control Software Comprises the Abis ERICSSON RBS200, RBS2000control software for NOKIA DE21, DE34, DE45, PRIME SITEa certain base station ITALTEL BS902including application NMC S2000, S4000, S8000program for manual SIEMENS SBS20, SBS60and automatic testing ALCATEL uBTS G2, M1C/M1M, G1 MKII, G2(CMD-B7 required) LUCENT TECH. BTS2000/2, Cube

CMD-K10CMD-K11CMD-K12CMD-K13CMD-K14CMD-K16CMD-K17

1082.2050.021082.2150.021082.2250.021082.2350.021082.2450.021082.2750.021082.2850.02

Software Upgrade Contract 1 year software upgrade for Abis Control Software CMD-K10CMD-K11CMD-K12CMD-K13CMD-K14CMD-K16CMD-K17

CMDSK10CMDSK11CMDSK12CMDSK13CMDSK14CMDSK16CMDSK17

1082.2950.021082.3040.021082.3740.021082.3140.021082.3240.021082.3340.021082.3440.02

Signalling Software For signalling purposes eg in test network or in production. Adds call setup functionality to the basic model (functionality is also contained in CMD-B8)

CMD-K30 1082.4530.02

Ciphering Software Allows encryption according to ETSI Rec. (A5-1/A5-2) (in conjunction with CMD-B8)

CMD-K51CMD-K52

1082.3540.021082.3640.02

UIC European Train Radio Allows measurements in the UIC frequency range European train radiote-lephony based on GSM-identical signalling (for CMD54/57 only)

CMD-K80 1082.4930.02

Modification Kit High-Level 2nd RF Output (13 dBm)

For off-air measurements. The standard output level range of the second out-put is approx. 33 dBm to 120 dBm; the level range +9 dBm to 60 dBm is offered alternatively (for CMD54 only)

CMD-U2 1059.6301.02

Modification Kit High-Level 2nd RF Output (9 dBmor 11 dBm)

For off-air measurements. The standard output level range of the second out-put is approx. 35 dBm to 120 dBm; the level range +9 dBm/+11 dBm to 60 dBm is offered alternatively (for CMD57/59 only, not usable with CMD-U13)

CMD-U3 1059.6501.02

Trigger Inputs/Outputs The time synchronization signals can additionally be applied to BNC con-nectors on the rear panel. For monitoring purposes the demodulated I/Q signals are brought out at BNC sockets (rear panel)

CMD-U5 1059.6901.02

Power Meas. Calibration Power measurement error GSM1800/1900

12




Specifications in brief

Common data of CMD 54/57

Timebase TCXO standard Nominal frequency 10 MHz Frequency drift (0 to 35 C) 1.5 x 10- 6 Aging 0.5 x 10 - 6/year (at 35 C)

Timebase OCXO Option CMD-B1Nominal frequency 10 MHzFrequency drift (0 to 50 C) 1 x 10 - 7Aging 2 x 10 - 7/year

5 x 10 - 9/day after 30 days of oper-ation

Timebase OCXO Option CMD-B2Nominal frequency 10 MHzFrequency drift (0 to 50 C)

(referred to 25 C) 5 x 10 - 9Aging after 30 days of operation and

under constant operat. conditions 3.5 x 10 - 8/year 5 x 10 - 10/day

Warmup time (at 25 C) approx. 10 min

DC voltmeter (CMD59: option CMD-B20)Measurement range 0 V to 30 V

DC ammeter (CMD59: option CMD-B20)Operating modes current averaging with GSM-adapted

time constant, current peak measure-ment (maximum and minimum)

Measurement range 0 V to 10 A Common-mode rejection 30 V Resistance 50 m W

AF Measurement Unit Option CMD-B41

AF generatorFrequency range 50 Hz to 10 kHzLevel range 10 m V to 5 VOutput impedance




GSM-specific measurement of spectrumSpectrum due to modulationTest method relative measurement, averagingResolution filter bandwidth 30 kHz Measurement at an offset of 100/200/250/400/600/800/

1000/1200/1400/1600 and 1800 kHz

Dynamic range better than specified by GSMfor offset >400 kHz max. 80 dB

Error 400 kHz max. 80 dB, with SW correctionmax. 76 dB, without SW correction

Error 1.5 dB (dynamic range

12




CMD 54/57/59 in multicarrier mode (Option CMD-B8)

The specifications apply to all cases, in which interfering carriers (up to 30 dB above useful level) are more than 30 GSM channels away. If there are interfering signals close to the useful carrier, an additional IF filter is switched in (multicarrier mode).

Typical filter characteristics in multicarrier modeOffset from useful channel (kHz) Filter suppression (dB)

0 0 (reference)200 20600 >33800 >411000 >48

This filter increases the measurement error for phase and power measurements.

Phase and frequency error measurementInherent phase error 2 (rms), 7.5 (peak)

Measurement of peak power/burst powerLevel error 1.5 dB

GSM-specific spectrum measurementsThe dynamic range specified for the basic model refers to the sum of all in-put voltage components. The additional GSM carriers appear as strong spu-rious emissions in the spectrum measurement and have to be taken into ac-count accordingly when evaluating the tolerances.

Typical effects of an interferer on power and modulation measurement results(see diagrams on the right). The characteristics of an interferer close to the carrier have the following effect on the measurement error: Power: the lower the power of the interferer, the smaller the measurement error. Frequency offset: the larger the frequency offset of the interferer, the smaller the measurement error. In the diagrams on the right an interferer with an offset of m=3 or m=6 GSM channels has been assumed.

Spectral purity: the narrower the modulation spectrum of the interferer, the smaller the measurement error. In the diagrams on the right the modulation spectrum to GSM 05.05 with linear interpolation (in the dB/Hz coordinates) has been used (worst case spectrum).

Number of carriers: the fewer the carriers, the smaller the measurement error. In the example, 1 interferer has been assumed.

The curves shown in the diagrams have been calculated assuming the worst case spectrum as interferer, the guaranteed CMD-B8 specifications for phase and power measurement and a typical IF filter characteristic.

The measured values are based on a real GSM spectrum, typical CMD-B8 specifications and typical filter characteristic.

General data

Rated temperature range 0 to +45 C to DIN IEC 68-2-1/2Storage temperature range - 40 to +60 CPower supply 100 to 120 V AC 10%

200 to 240 V AC 10%50 to 400 Hz 5%

Power consumption (without options) approx. 85 WDimensions (W x H x D) 435 mm x 192 mm x 363 mmWeight (without options) approx. 14 kg

Ordering information

Digital Radiocommunication Testerfor GSM900 CMD54 1050.9008.54for GSM1800 CMD57 1050.9008.57for GSM1900n CMD-B19 1050.9008.59

Accessories supplied power cable, operating manual, fuses

Options see overview of options on page 311) In GSM1900 mode with option CMD-B19 fitted.

Phase and level error as a function of adjacent-channel power and adjacent-channel frequency offset

Level increase of interfering channel relative to useful channel

10

8

6

4

2

00 5 10 15 20 25 30

Typi

cal p

hase

err

or

m=3

m=6

Calculation

Measurement(m=3)(m=6)


20

15

10

50 5 10 15 20 25 30

Typi

cal p

hase

err

or (p

eak)

m=3 m=6

Calculation

Measurement(m=3)(m=6)


4

3

2

1

00 5 10 15 20 25 30

Typi

cal l

evel

err

or

m=3

m=6

CalculationdB

Digital Radiocommunication Testers CMD54, CMD57, CMD59

Competence in Test and Measurement, Radiocommunications and BroadcastingFrom our PrinciplesWho we are and what we doOur Business Fields and ProductsTest and MeasurementRadiocommunications SystemsBroadcasting, Paging, Broadband CommunicationsRadiomonitoring and RadiolocationIT SecurityServices

Mobile Radio MeasurementsRadiocommunication Service Monitors of CMS FamilyBrief descriptionMain featuresOverview of modelsOverview of configurationsOperationSpecifications in briefOrdering information

Radiocommunication Service Monitor CMS54Brief descriptionMain featuresSpecial data of CMS54Ordering information

Radiocommunication Service Monitor CMS57Brief descriptionMain featuresOperationOrdering informationSpecific data of CMS57

Options for radio testers of the CMS family2 GHz Radiocommunication Tester CMT55Brief descriptionMain featuresOverview of equipment and optionsMeasurement capabilitiesSpecifications in briefOrdering information

Radiocommunication Analyzers CMTA54, CMTA84Brief descriptionMain featuresOperationStandard equipment of CMTA54Additional equipment of CMTA84OptionsRecommended extrasSpecifications in briefOrdering information

Overview of models and options for CMS, CMT, CMTADigital Radiocommunication Testers CMD50/52, CMD53/55, CMD65Brief descriptionOperationTest capabilitiesOverview of applications and optionsSpecifications in briefOrdering information

Digital Radiocommunication Testers CMD54, CMD57, CMD59Brief descriptionThe key features at a glanceOverview of options and extrasSpecifications in briefOrdering information

Digital Radiocommunication Tester CMD60/CMD65Brief descriptionBenefits at a glanceApplication overviewMain featuresMenu structureInterface descriptionOverview of optionsSpecifications in briefOrdering information

Digital Radiocommunication Tester R4860Brief descriptionMain featuresSpecifications in briefOrdering information

Digital Radiocommunication Tester CMD80Brief descriptionMain featuresTest capabilitiesSpecifications in briefGeneral dataOrdering information

Digital Radiocommunication Test Sets CRTP02, CRTC02Brief descriptionApplicationsOperationSignallingProtocol analysisData servicesSupplementary servicesOverview of hardware optionsOverview of software optionsSpecifications in briefOrdering information

Digital Radio Testers CTS50, CTS55, CTS65 for mobile phonesBrief descriptionMain featuresGSM measurement functionsDECT measurement, test and adjustment capabilitiesSpecifications in briefOrdering information

Mobile Installation Tester CITBrief descriptionOperationSpecifications in briefOrdering information

Universal Shielded Chamber with Antenna Coupler CTD-Z10Brief descriptionSpecifications in briefOrdering information

EMC/Field-Strength MeasurementsIntroductionEquipment required for EMI measurements to specific standardsEMI Test Receiver ESPCBrief descriptionMain featuresOperationSpecifications in briefOrdering information

EMI Test Receiver ESCS30Brief descriptionMain featuresSpecifications in briefOrdering information

EMI Test Receivers ESHS10, 30, ESVS10, 30 and ESSBrief descriptionOverview of modelsMain featuresOperationSpecifications in brief: ESHSSpecifications in brief: ESVSSpecifications in brief: ESSOrdering information

EMI Test Receiver ESIBrief descriptionSpecifications in briefOrdering information

EMI Test Receivers ESBI and ESMIBrief descriptionMain featuresMeasurement capabilitiesOperationSpecifications in briefOrdering information

Test Receivers ESN, ESVN20, 30, 40Brief descriptionMain featuresManual operationAutomatic operationUse in radiomonitoringUse in computer-controlled systemsSpecifications in briefOrdering information

Test Receivers ESVBBrief descriptionMain featuresField-strength measurements in digital sound and TV broadcast networksSpecifications in briefOrdering information

Test Receiver ESVDBrief descriptionMain featuresSpecifications in briefOrdering information

Miniport Receiver EB200Brief descriptionMain featuresSpecifications in briefOrdering information

Digital Radio Analyzer PCSDBrief descriptionBasic unitSoftware optionsSpecifications in briefOrdering information

EMI Software ES-K1Brief descriptionMain featuresTest runsReport generationHardware requirementsOrdering information

EMI Software ESxS-K1Brief descriptionMain featuresHardware requirementsOrdering information

Mast and Turntable System HCC, HCM, HCT12; Absorbing Clamp Slideway HCABrief descriptionMain featuresOperationSpecifications in briefOrdering information

Absorbing Clamps MDS-21 and MDS-22Brief descriptionMain featuresSpecifications in briefOrdering information

Triple-Loop Antenna HM020Brief descriptionMain featuresSpecifications in briefOrdering information

Active Antennas AM524, HM525Brief descriptionEquipment suppliedSpecifications in briefOrdering information

Shielded, Calibrated Magnetic Field Pickup Coil HZ-10Brief descriptionMain featuresSpecifications in briefOrdering information

E and H Near-Field Probe Sets HZ-11, HZ-14Brief descriptionEquipment supplied, characteristicsSpecifications in briefOrdering information

Precision Halfwave Dipole Sets HZ-12, HZ-13Brief descriptionSpecifications in briefOrdering information

Active Receiving Dipoles HE202, HE302Brief descriptionMain featuresSpecifications in briefOrdering information

HF AntennasRod Antenna HFH 2-Z1Loop Antenna HFH 2-Z2Inductive Probe HFH 2-Z4Rod Antenna HFH 2-Z6Power Supply HZ-9Specifications in brief

VHF, UHF and SHF AntennasRF Probe HFV-ZMast and Tripod HFU-ZBroadband Dipole HUF-Z1Wooden Tripod HZ-1V-Networks ESH2-Z5, ESH3-Z5, ESH3-Z6Main featuresBrief description of ESH2-Z5Brief description of ESH3-Z5Brief description of ESH3-Z6Specifications in briefOrdering information

200-A Four-Line V-NetworkENV4200Brief descriptionMain featuresSpecifications in briefOrdering information

T-Networks ESH3-Z4, EZ-10Brief descriptionMain featuresSpecifications in briefOrdering information

Antenna Impedance Converter EZ-12Current Probe EZ-17VHF Current Probe ESV-Z1Pulse Limiter ESH3-Z2, Attenuator ESH 2-Z11Preamplifiers ESH3-Z3, ESV-Z3, ESMI-Z7Brief descriptionMain featuresSpecifications in briefOrdering information

Probes ESH2-Z2, ESH2-Z3Specifications in briefOrdering information

RF Connecting Cables HFU2-Z4, HFU2-Z5Feeder Cables HZ-3, HZ-4

TV Broadcast MeasurementsMPEG2 Measurement Generator DVGBrief descriptionMain featuresApplicationsTest signalsChoice of test signals (625-line standard)Specifications in briefOrdering information

Stream CombinerTM DVG-B1Brief descriptionMain featuresDefining a user-specific transport streamEditing a user-specific transport streamGenerating defined nonconformal statesSpecifications in briefOrdering information

MPEG2 Measurement Decoder DVMDBrief descriptionAnalyzerDecoderRealtime measurement functionsSpecifications in briefOrdering information

Stream ExplorerTM DVMD-B1Brief descriptionFour operating modesDUMPTRIGGERMEASUREMONITORINGOther featuresSystem requirementsOrdering information

TV Test Receiver Family EFABrief descriptionApplicationsFeaturesFamily conceptSpecifications in briefOrdering information

CCVS+Component Generator SAF, CCVS Generator SFFBrief descriptionMain featuresSpecifications in briefOrdering information

TV Test Transmitter SFMBrief descriptionMain featuresOperationSpecifications in briefOrdering information

TV Test Transmitter SFQBrief descriptionMain featuresSpecifications in briefOrdering information

TV Generators SGPF, SGSF, SGMFBrief descriptionMain featuresOrdering informationSpecifications in brief

TV Network Analyzers SWKF, SOKFBrief descriptionMain featuresMeasuring capabilitiesSpecifications in briefOrdering information

Video Analyzer UAFBrief descriptionMain featuresOperationSpecifications in brief (standard B/G)Ordering information

Digital Video Component Analyzer VCA, DTL Analysis VCA-B11Brief descriptionMain featuresDTL analysis option (VCA-B11)Specifications in briefOrdering information

Video Measurement System VSABrief descriptionMain featuresFive instruments in oneSpecifications in briefOrdering information

TV Test Receiver Option VSA-B10Brief descriptionFeatures of VSA with Option VSA-B10Features of TV test receiverSpecifications in briefOrdering information

Noise Generator SUF2Brief descriptionSpecifications in briefOrdering information

Video Analyzer VTA71Brief descriptionMain featuresSpecifications in briefOrdering information

Spectrum and Network AnalysisSpectrum Analyzers FSEA, FSEB, FSEM, FSEKBrief descriptionMain featuresFrom AF to microwaveMeasurement functionsOperationOverview of configurations and optionsCommon specifications in briefModel-dependent specifications in briefOrdering information

Vector Signal Analyzer Option FSE-B7 for Spectrum Analyzers FSEBrief descriptionMain featuresBenefits at a glancePrinciple of vector signal analysisSpecifications in briefOrdering information

Tracking Generators FSE-B8 to -B11Brief descriptionMain featuresDescriptionVersatile measurement functionsSpecifications in briefOrdering information

Application Firmware FSE-K10/FSE-K11Brief descriptionMain featuresCovered standardsMeasurement functions and trigger sourcesSpecifications in briefOrdering information

Signal Analyzer FSIQBrief descriptionMain featuresSpecifications in briefOrdering information

Spectrum Analyzers R3265A, R3271A, R3365A, R3371ABrief descriptionOperationOverview of modelsSpecifications in briefOrdering information

Spectrum Analyzers R3263, R3465, R3272Brief descriptionOperationOverview of modelsR3465 OptionsR3263 OptionsAdd-on unitsSpecifications in briefOrdering information

Spectrum Analyzer R3131Brief descriptionOperation, functionsSpecifications in briefOrdering information

BasePak - for all measurements on antenna installationsBrief descriptionMeasurement capabilitiesOrdering information

Spectrum Analyzers U3641, U3661Brief descriptionThe main technical features at a glanceModularity through retrofittable optionsSpecifications in briefOrdering information

Spectrum Analyzers U4941, U4341, U4342Brief descriptionOperationOverview of modelsSpecifications in briefOrdering information

Spectrum Analyzers R3261, R3361Brief descriptionOperationOverview of modelsSpecifications in briefOrdering information

Vector Network Analyzers ZVC, ZVCE, ZVR, ZVRE, ZVRLBrief descriptionMain featuresSystem configurationBrief specificationsSystem error correction techniquesGeneral dataBenefits at a glanceOrdering information

Vector Network Analyzers R3752, R3753Brief descriptionMain featuresOverview of modelsSpecifications in briefOrdering information

Vector Network Analyzer R3754Brief descriptionMain featuresDesign featuresOptionsSpecifications in briefOrdering information

Vector Network Analyzers R3765, R3767Brief descriptionMain featuresOverview of modelsOperationExtrasSpecifications in briefOrdering information

SWR Bridges ZRA, ZRB2, ZRC, VCA-Z1Brief descriptionSpecifications in brief, ordering information

Signal GenerationSignal Generator SMTBrief descriptionMain featuresOverview of optionsSpecifications in briefOrdering information

Signal Generator SMEBrief descriptionMain featuresOverview of optionsSpecifications in briefOrdering information

Vector Signal Generator SMIQBrief descriptionMain featuresApplications, optionsSpecifications in briefOrdering information

Signal Generators SMGU, SMHUBrief descriptionMain featuresCharacteristicsSpecifications in briefOrdering information

Signal Generator SMHU58Brief descriptionMain featuresLevel, modulationOverview of optionsSpecifications in briefOrdering information

Signal Generator SMYBrief descriptionMain featuresCharacteristicsSpecifications in briefOrdering information

Signal Generators SMG, SMH, Power Signal Generator SMGLBrief description of SMG, SMHBrief description of SMGLMain featuresOverview of optionsSpecifications in briefOrdering information

Microwave Signal Generator SMPBrief descriptionMain featuresOverview of optionsSpecifications in briefOrdering information

I/Q Modulation Generator AMIQ/Simulation Software WinIQSIMBrief descriptionMain featuresI/Q simulation softwareSpecifications in briefOrdering information

Function Generators AFG, AFGUBrief descriptionMain featuresOperating modesModulationOption, softwareSpecifications in brief: AFGSpecifications in brief: AFGUOrdering information

Dual Arbitrary Waveform Generator ADSBrief descriptionMain featuresOverview of options and softwareOperationSpecifications in briefOrdering information

Generators APN04, APN06Brief descriptionMain featuresOverview of optionsSpecifications in briefOrdering information

Arbitrary Waveform Designer AWD-K1I/Q Simulation Software IQSIM-KCOFDM Software DAB-K1Ordering information AWD-K1, IQSIM-K, DAB-K1Hardware required for Software AWD-K1, IQSIM-K and DAB-K1Software SME-K2Brief descriptionMain faturesSpecificationsOrdering information

Signal AnalysisAudio Analyzer UPABrief descriptionMain featuresOverview of optionsSpecifications in briefOrdering information

Audio Analyzer UPLBrief descriptionMain featuresOverview of optionsSpecifications in briefOrdering information

Audio Analyzer UPDBrief descriptionFeatures differing from UPLAdditional measurementsOverview of optionsSpecifications in briefOrdering information

VOR/ILS Receiver/Analyzer EVS200Brief descriptionMain featuresSpecificationsOrdering information

Modulation Analyzers FMA, FMAB, FMAV, FMB; Selective Modulation Analyzer FMASOverview of optionsBrief descriptionMain featuresSpecifications in briefSpecs in brief: FMAS receive modeSpecs in brief: FMAV, VOR/ILS measurementOrdering information

Optical MeasurementsIntroduction to Optical MeasurementsOptical power meters and light sourcesSpectral analysisMeasurement examples,About the following pages

Automatic OTDR OFR14Brief descriptionMain featuresMeasurement capabilitiesSpecifications in briefOrdering informationOptical modules

Optical Wavelength Meter TQ8325Brief descriptionMain featuresOperationSpecifications in briefOrdering information

Optical Spectrum Analyzer Q8347Brief descriptionMain featuresOperationSpecifications in briefOrdering information

Optical Spectrum Analyzer Q8383Brief descriptionMain featuresOperationSpecifications in briefOrdering information

Handheld Optical Power Meter Q8210Brief descriptionMain featuresOperationSpecifications in briefOrdering informationOptical sensors

Benchtop Optical Power Meter Q8221Brief descriptionMain featuresSpecifications in brief (basic unit)Optical sensorsPlug-in light sources

Voltage, Power, Frequency MeasurementsLevel Meter URV35Brief descriptionMain featuresSpecifications in briefOrdering information

Millivoltmeter URV5Brief descriptionMain featuresSpecifications in briefOrdering information

Millivoltmeter URV55Brief descriptionMain featuresMeasuring heads

Specifications in brief, Ordering information URV 55, NRVS, NRVDProbes and Insertion Units URV5-Z1, -Z2, -Z4, -Z7, -Z9 for voltage and level measurementBrief descriptionOrdering informationSpecifications in brief

Power Meter NRVSBrief descriptionMain featuresCharacteristicsMeasuring heads

Dual-Channel Power Meter NRVDBrief descriptionMain featuresCharacteristics

Power Sensors NRV-ZBrief descriptionOverview of modelsSpecifications in briefOrdering information

Power Reflection Meter NRTBrief descriptionOperation, measurement functionsOptionsSpecifications in brief: power sensorsSpecifications in brief: NRT basic unitOrdering information

Directional Power Meter NASBrief descriptionMain featuresInsertion unitsSpecifications in brief: basic unitOrdering informationSpecifications in brief: Insertion Units NAS-Z

RMS Voltmeter URE2, RMS/Peak Voltmeter URE3Brief descriptionMain featuresCharacteristicsSpecifications in brief: URE2Specifications in brief: URE3Ordering information

Digital Multimeter R6552Brief descriptionMain featuresSpecifications in briefOrdering information

Test SystemsThe future lies with systemsSystem applicationsProject handling by Rohde&SchwarzOur range of test systemsFuture-oriented designSupportReferences

Service for systems

Production Test SystemsContents, IntroductionQuality is measurable, quality is testableEconomyStart small - upgrade laterTest strategies

Service for systemsFirst-hand serviceServices availableService blocksService optionsHotline

Production Test Systems Overview of TSA System FamilyElectrical in-circuit testHybrid in-circuit testAnalog functional testDigital functional testCombinational test

Test Workstation TSABrief descriptionMain featuresDesignMeasurement configurationOperation

Power Test Station TSAPBrief descriptionMain features

Universal Test System TSUBrief descriptionDesignSoftware and hardware conceptOverview of TSU System FamilyAnalog Prescreener (MDA) and Universal Analog Functional Tester TSUCUniversal Combinational Tester TSUMUniversal Functional Tester TSU

LaserVision TS-LV1, -LV2Brief descriptionMain featuresWindows NT interfaceTwo basic models in useModular conceptSpecifications in briefOrdering information

Production Test System Software TSS 5.0Brief descriptionHigh-level test languageTest methodsQuality management and paperless repair

Type-Approval Systems for Mobile RadioInternational benchmark for mobile radio test technologySystem solutions for all significant mobile radio systemsWe set the standards you enjoy the benefitsFuture-proof thanks to high flexibilityGSM900/1800/100 Simulators TS8915A, TS8915B and TS8916BBrief descriptionMain featuresTests to ETS 300 607-1GSM900/1800/1900 Multicarrier Tester TS8913

GSM1800/1900 Base Station Test System TS8510Brief descriptionMain featuresTests to ETSI/GSM Spec. 11.2x

DECT Type-Approval Test Systems TS8930B, TS8930FBrief descriptionMain features

DECT Type-Approval Test System TS1210Brief descriptionMain features

DECT Protocol Tester TS1220Brief descriptionMain features

Type-Approval Test System TS8410Brief descriptionMain features

Coverage Measurement Systems (Mobile Radio or DAB)Successful know-how transfer: innovative ideas for coverage measurementsCustomer satisfaction is your capital and your dividendsThe optimized network minimum investment returning maximum performanceDigital mobile radio systems a new challenge to measurement technologyReliable planning through practice-oriented measurementFrom a single sourceOverview of systemsCoverage Measurement System TS9955 (Mobile Radio or DAB)Brief descriptionMain featuresSystem configurationSoftware

Coverage Measurement System TS9951 (Mobile Radio or DAB)Brief descriptionThe right system for every applicationMain featuresSystem configurationSoftware

Test Transmitter System TS9953Brief descriptionMain featuresSystem configuration

Evaluation Software ROSEVALBrief descriptionMain featuresAvailable technologies

EMC Test SystemsEMI Test System TS9975Brief descriptionSystem configurationSoftware concept

EMS Test System TS9980Brief descriptionMain featuresMeasurement technologySoftware

EMS Test System TS9981Brief descriptionMain featuresSystem configurationOperationExpandabilityOverview of models

EMS Test System TS9986Brief descriptionMain featuresSystem configurationOperationExpandabilityOverview of models

EMS Test System TS9982Brief description

EUT Monitoring Systems TS998xMBrief descriptionSystem configurationSoftware concept

EMS Test System TS9983Brief descriptionMain featuresSystem configurationOperationExpandability

S-LINEBrief descriptionMain featuresAvailable modelsExtensionsEMS line application packageEMI line application packageSpecifications in briefOrdering information

EMS Software EMS-K1Brief descriptionMain featuresAutomatic generation of immunity parametersEUT monitoringMeasurement sequence controlOrdering information

Broadcasting Measurement SystemsDigital broadcasting: the ultimate challenge for test & measurementEverything under control with Rohde&SchwarzThe complete test & measurement equipment for the digital broadcasting revolutionIntroductionBroadcasting Measurement and Monitoring Systems TS 6100Control Center TS6100ZBrief descriptionSystem hardwareHardware system extensions

System Software TS6100/WinSystem Software TS6100/WinSoftware extensions

TV Monitoring System TS6110Brief descriptionSpecificationsOrdering information

TV Monitoring System TS6120Brief descriptionOrdering information

TV Transmitter Test and Monitoring System TS6130Brief descriptionOrdering information

TV Transmitter Test System TS6140Brief descriptionOrdering information

TV Transmitter Test System TS6150Brief descriptionOptionsOrdering information

DAB Monitoring System TS6160Brief descriptionSystem configurationMonitoring concept

DVB Monitoring System TS6170Brief descriptionSystem kernelOptionsMonitoring concept

Broadcasting Coverage Measurement Systems TS6200IntroductionPrinciple of operationApplicationsCOVER FamilyCOVER measurement parametersEquipment required for parameter measurement (DAB/DVB)System softwareAnalog Coverage Measurement System TS6210Brief description

DAB Coverage Measurement System TS6260Brief description

DVB Coverage Measurement System TS6270Brief description

DVB Coverage Measurement System TS 6280

Program Input Racks with Monitoring FunctionBrief descriptionMain featuresCharacteristicsSpecifications in brief

Audio Monitoring System AMONBrief descriptionOperationSpecificationsOrdering information

Audio Data Transmission System ADASBrief descriptionMain featuresOperationSpecificationsOrdering information

Video PC Card VPC1000Brief descriptionApplicationsSoftwareSpecifications in briefOrdering information

ETI/STI Transport Frame Decoder FD1000Brief descriptionMain featuresFunctionsComponentsElectrical interfacesOrdering information

Industrial Controllers, Printers, MonitorsPortable Industrial Controller PSPBrief descriptionSpecifications in briefOrdering information

Industrial Controller PSMBrief descriptionMain featuresComprehensive basic configurationHigh flexibilityUnlimited memory expansionVersatile auxiliary functionsR&S system softwareOptionsYour sensitive data under lock and keySafe investment thanks to modular conceptSpecifications in briefGeneral dataOrdering information

Industrial Monitor PMC4Main featuresSpecifications in briefOrdering information

Pinwriter PDNBrief descriptionSpecifications in briefOrdering information

Power SupplyRange of Products, IntroductionPower supplies

Overview of Power SuppliesSingle Power SuppliesNGM, NGK: 30/70 W lab modelsNGA 120 W compact modelsNGAS: 160 W compact modelNGB: 350 W bench modelsSpecifications in brief of Single Power Supplies

Dual and Triple Power SuppliesNGMD 35 2 x 0 to 35 V/1 ANGL 35 3 x 0 to 35 V/0.6 ANGT 2 x 0 to 20/25/35 V 1/0.8/0.6 A; 1 x 0 to 6 V/5 ASpecifications in brief of Dual and Triple Power Supplies

Power Supplies NGRUBrief descriptionMain featuresOperationSpecifications in briefOrdering information

1000 W Power Supplies NGCBrief descriptionSpecifications in briefOrdering information

Power Supplies NGREBrief descriptionMain featuresOperationSpecifications in brief and Order NumbersCompletion of Order Numbers

Programmable Voltage Source NGPSBrief descriptionMain featuresOperationSpecifications in briefOrdering information

Programmable Power Supplies NGPUBrief descriptionMain featuresSpecifications in briefOrdering information

Programmable Power Supplies NGPVBrief descriptionMain featuresSpecifications in briefOrdering information

Programmable Power Supplies NGPXBrief descriptionMain featuresSpecifications in briefOrdering information

Programmable Power Supply NGPE 40/40Brief descriptionMain featuresSpecifications in briefOrdering information

Triple Power Supply NGPTMain featuresOperationSpecifications in briefOrdering information

DC Power Supply NGSM32/10Brief descriptionMain featuresApplication-specific characteristicsOperationSpecifications in briefOrdering information

Measurement AccessoriesRF Step Attenuators RSP, RSGBrief descriptionMain features

RF Step Attenuators RSH, DPSP, DPSBrief description

Specs in brief attenuatorsOrdering information attenuatorsRelay Matrix PSN, RF Relay Matrix PSUMain featuresSpecifications in briefOrdering information

Matching Pads, Attenuators, TerminationsBrief descriptionSpecifications in brief / Ordering information for attenuators, terminations, matching pads

Junction Boxes/Power SplittersPower Splitter/Combiner DVSFour-Port Junction Box DVU4Power Splitter RVZ

Adapters for RF ConnectorsCoaxial ComponentsBrief description

Rohde & Schwarz Customer ServiceDocumentation medium between man and technologyTechnical documentation from Rohde & Schwarz prepared to customer's order - also for non- R&S pro...Keeping pace with new requirementsNew tools for your technical documentationMore than just a translationDrawing on qualified sourcesDocumentation just in timeDocumentation as you like itFurther support provided by Rohde&SchwarzGet in touch with us

TrainingWelcome to our training coursesTraining sitesAsk for information on our seminars

RepairService centers of international standard

CalibrationDefinitionsProduct calibration certificateCalibration in serviceCalibration intervalTolerance analysisTraceabilityHow do we do it?

Repair, CalibrationHotline

Integrated customer support at Rohde&SchwarzFinancingService contractsApplication notesDemo unitsSupport center

Cabinets, designsDimensionsCabinet designsRackmountingDesign 2000 (BW2000)Compact design 90 (KB 90)System compatibilityTransit Cases ZZK-9x

Type/Data Sheet IndexRohde & Schwarz Addresses

Rs Cmd57 Sys1

Documents

Transcript of Rs Cmd57 Sys1