RPC003 Pattern
Transcript of RPC003 Pattern
-
8/22/2019 RPC003 Pattern
1/1
CENTERFRONT
SIDESE
AM
SIDESEA
M
SIDESEA
M
SIDESEA
M
PATTERN2HIP PADACUTX21.5MMTHICKLEATHER
PATTERN2
HIP PADBCUT X 2
1.5MMTHICKLEATHER
EYELET PLACEMENT
Themost eectiveway ofsecuring eyelets is to gradually spread thebres ofthecoutil usingawls ofincreasingsize.
Do not cut a holefor theeyelet,this will weaken thexing,due to tearing,and stretch-ingofthe coutil,theeyelets would then fall out over time.
LEATHER PADS:Ifyou would liketo add couturehippads to yourcorset then cut these panels in 3mm
thick tough leather and pleasewatch theassociated video tutorial.found at:http://www.ralphpink.com/
EXTERIOR PIECES FOR HIP PADCORSET
Thesepattern pieces replacethe exterior surfaceofthe corset (only ifyou arebuild-
ingin hippads).They are a dierent shapeto theoriginal sidebackand sidepanels.When theinterior and exterior surfaces nally cometogether there will bebetween
thepanels to accomodatethe hippads.If this spaceis not lled with thepads,thentheexterior surfacewill collapseand beoppy! :)
PIPING/CHORDING (OPTIONAL)
Theselines show theaddition ofpipingchanels for added strength and support at the
shoulder straps.I havecreated a tutorial on this technique which can befound here:http://www.ralphpink.com/archives/1881
BONING AT SIDESEAM:
This is exactly thesameas the boningon all other panels,however thecolour ofthelineis yellow simply to helprecognition ofthepanel and its positioningin thecorset
CORSET BONING CHANNELS:Theselines indicatethechannels that will need to bestitched in each panel piece.
Pleasenote:this line is 5mm at theseams ofmost panel pieces.this indicates boningshould beplaced over this seam.thereforea 1cm widestrip ofboningwill overlap
either sideofeach seam by 5mm.I hopethis makes sense?
SEAMALOWANCE
ACTUALSEAMOF CORSET PATTERN
IMPORTANT READ FIRST:This PDF contains 2corsets, they areboth very similar,but theyre diculty varies.an idea is to make a toileof PATTERN1 rst
then ifyou arecondent progress to PATTERN2 (hipextensions).
PATTERN1
This is thestandard version of this corset.If you wish to makea corset without hip extensions,then please usethis pattern only.
simply cut each pattern pieceas indicated.
PATTERN2
Is based on PATTERN1 however thereis a slight dierenceat the sideseam and hip. This corset uses hippads or hipextensions to createa
moredrastic corset shape,narrowing thewaist and enlargingand pointingthehi ps forward.
Ifyou wish to makethis alternatecorset instead ofthestandard version, then pleasecut out both PATTERN 1& PATTERN2. PATTERN1 forms theinterior surfaceof thecorset, thepart that sits against thebody, and PATTERN2 forms theexterior surfaceofthe corset.Because PATTERN2
is slightly larger at thehip it forms a pocket for thehip pads to beinserted between PATTERN1 & PATTERN2.
PATTERN 1PATTERN 2
PATTERN2
BA
CKPANEL
EX
TERIORSURFACE
CU
TX2COUTIL
CU
TX2MATERIAL
A
PATTERN2
SIDEBACKPANEL
EXTERIORSURFACE
CUTX2COUTIL
CUTX2MATERIAL
B
PATTERN2
SIDEPANEL
EXTERIORSURFACE
CUTX2COUTIL
CUTX2MATERIAL
C
PATTERN2
SIDEFRONTPANEL
EXTERIORSURFACE
CUTX2COUTIL
CUTX2MATERIAL
DPATTERN2
FRONTPANEL
EXTERIOR SURFACE
CUT X2CO UTIL
CUT X 2M ATERIAL
E
PATTERN 2
ACROSS HIP PANEL
EXTERIORSURFACE
CUT X2 COUTIL
CUTX2MATERIAL
F
PATTE
RN2
SH
OULD
ERSTR
AP
PAN
EL
EXTE
RIORS
URFACE
CUTX2
COUTIL
CUT
X2MA
TERIAL
H
PATTERN1
SIDEPANEL
INTERIORSURFACE
CUTX2COUTIL
C
PATTERN1
FRONT PANEL
CUT X4COUTILCUT X2MATERIAL
E
PATTERN1
SHOULDERSTRAP
INTERIOR&EX
TERIOR
SURFACE
CUTX4COUT
IL
CUTX2MATE
RIAL
H
GRAINLINEFORALL
PATTERNPIECES
FOR FURTHER HELP MAKING THIS CORSET PLEASESEE:
http://www.ralphpink.com/tutorials/corsetry-construction
THIS CORSET PATTERN MAY NOT BE USED FOR COMERCIAL USE, RESOLD AS A PATTERN, BRANDED WITH A DIFFERENT LOGO OR RE-POSTED ON ANY WEBSITE. COPYRIGHT RALPHPINK 2011
THIS CORSET PATTERN MAY NOT BE USED FOR COMERCIAL USE, RESOLD AS A PATTERN, BRANDED WITH A DIFFERENT LOGO OR RE-POSTED ON ANY WEBSITE. COPYRIGHT RALPHPINK 2011
HIP PAD EXTENSIONS:Whenmakingthehippadspleasereferto
www.ralphpink.comfor in-depthinforma-tion.Onceconstructedtheseleatherhipexten-
sionswillneedtobestuffedorpaddedoutwithwadding, tocreatea firmpadthat sitswellonthehip/ against thebody.
Anidea is to(once filledwith wadding)enclosehippads bothback andfront inathinlayer of quiltedmaterial, extending
3-4cmaroundtheoutsideof thepad, thisallows youtotackit intoplacebetweenthecorset layers. Alsoit willcreate asmoothing
effect onthesides of thepad.Pleaseexperiment andplay withtheposi-tioningand placement of thesepads, its
not anexact science. AlsoI recommendyoutry onthecorset withthepads andadjust thepositioningto get it perfect.
PATTERN 1ACROSSH
IPPANELINTERIORSURFACECUTX2 COUTIL
F
PATTERN2HIPPAD ACUTX2IN FINE QUILTING
PATTERN2
HIP PADB
CUT X 2INFINEQUILTING
PATTERN2
HIP PADB ACKINGCUT X 2
IN FINEQ UILTING
PATTERN1
CROTCH
PANEL
INTERIOR&EXTERIORSURFACE
CUTX1COUTIL
G G
PATTERN2
CROTCH
PANEL
INTERIOR&EXTERIORSURFACE
CUTX1COUTIL
TYPE B TYPEBUse PATTERN1 pieces only for interiorsurface.Use PATTERN2 pieces only for
exterior surface/s
Ifyou would liketo construct thecorset
with an exterior layer ofsatin (or any similarmaterial) makesureyou cut an additional
set ofPATTERN2.Seeimagebelow for an example
coutil layers
satin/or similarmaterial choice
indictaion ofseam allowance
Exterior surface
Interior surface
PATTERN2
PATTERN2
PATTERN1
TYPE C TYPEC:Use PATTERN1 pieces only for interiorsurfaceand exterior surface.Do not useany
part ofPATTERN2.Pleasenotethis pattern does not havehip
pads built in.
ALSO...MAKESUREYOUCUT YOUR PATTERN
OFF AT THELINEINDICATEDON PATTERN1(MARKEDINGREEN
Ifyou would liketo construct thecorsetwith an exterior layer ofsatin (or any similar
material) makesureyou cut an additionalset in PATTERN1(cut at green line).
Seeimagebelow for an example
coutil layers
satin/or similarmaterial choice
indictaion ofseam allowance
Exterior surface
Interior surface
lookforgreencuttingl in
eonPATTERN1
PATTERN1
SIDEFRONTPANEL
INTERIORSURFACE
CUTX2COUTIL
D
PATTERN1
BACKPANEL
INTERIOR&
EXTERIORSUR-
FACE
CUTX4COU
TIL
CUTX2MA
TERIAL
A
PATTERN1
SIDEBACKPANEL
INTERIOR&EXTERIORSUR-
FACE
CUTX4COUTIL
CUTX2MATERIAL
B
TYPEC
TYPE
C
TYPEC
PATTERN1
PATTERN1
PATTERN1
TYPE ATYPEA:Use PATTERN1pieces only for interiorsurfaceand exterior surface/s.Do not use
any part ofPATTERN2.Pleasenotethis pattern does not havehippads built in.
Ifyou would liketo construct thecorset
with an exterior layer ofsatin (or any similarmaterial) makesureyou cut an additional
set in PATTERN1.seeimagebelow for an example.
coutil layers
satin/or similarmaterial choice
indictaion ofseam allowance
Exterior surface
Interior surface
VIEW THE ONLINE VIDEO TUTORIAL FOR THIS CORSET HERE:
http://www.ralphpink.com/tutorials/corsetry-construction