ROyCECROssgROUP · labels, lockout tagout and spill containment 08 TERMINALs & LUgs Pre-insulated...

©All Royce Cross Group products are subject to change. RCG reserves the right to modify the design, technical specifications and dimensions without prior notice. E&OE. roycecrossgroup.com) 08 8269 4000 8

ElECtRiCAl & MECHANiCAl ENGiNEERiNG SUPPliES

1

ROyCECROssgROUP

ELECTRICALDIsTRIBUTORs

G E N E R A L C A T A L O G U E

ELECTRiCAL & MECHANiCAL ENGiNEERiNG SUPPLiES

roycecrossgroup.com

ROYCECROSSGROUP

2

IND

EX

INDEX04 POWER & AUTOMATION Variable speed drives, soft starters, motor

starter protection, star/delta starters, motion control

06 IDENTIFICATION & sAFETy Brady portable printers, first-aid, signs,

labels, lockout tagout and spill containment

08 TERMINALs & LUgs Pre-insulated terminals and copper lugs.

09 ELECTRIC MOTORs Alloy single and three-phase induction,

cement mixer, imperial general-purpose,

compressor duty, bricksaw, cast-iron

three-phase, hazardous environment, air

movement, evaporative fan and belt-drive,

brake motors and DC motors

20 gEAR MOTORs Reducers & variators

21 ENCLOsUREs Powder-coated metal & stainless-steel

22 DATA & COMMUNICATION Racks, cabling, UPS, connectors, fibre optics,

cable ties, accessories

24 CHAIN Agrituff, Industrial, NEP, Super, Lambda,

conveyor

25 sPROCKETs, RACKs & gEARs Sprockets, gears, spur gears, racks

26 BELTs, PULLEys & COUPLINgs Timing, V, conveyor and ribbed belts; cast-iron and

aluminium pulleys; various couplings

27 CONvEyOR COMPONENTs Conveyor systems and products

28 CABLE-LAyINg, LINKs, BUsWAy, FIXINgs & FUsE gEAR Cable-laying products, covered and bare links;

ducting raceway; electrical fixings, fasteners and

supports; fuse gear

29 LIgHTNINg PROTECTION Direct strike protection systems, earthing and

grounding, surge and spike protection products

30 HAzARDOUs AREA EqUIPMENT Fittings and glands, lighting and enclosures

31 HEATsHRINK & BUsDUCT sysTEMs Heat shrink reels, end caps, gloves, tubing lengths;

Vass busway/busduct systems and products

BUY ONLINEwww.roycecrossgroup.com


BU

Y ON

LiNE



3

A family-owned business based at Dudley Park, South Australia, the Royce Cross Group comprises three companies: Royce Cross Electric Motor Group; Chains and Accessories; and AJF Electrical Distributors.All strive to offer an extensive range of high-performance and quality products as well as exceptional service.

ROyCE CROss ELECTRIC MOTOR gROUPFounded by Royce Cross more than 45 years ago, Royce Cross Electric Motor Group is a market leader in the efficient, quality service and supply of electric motors and accessories. During the past four decades, the company has delivered quality products that meet efficiency standards and quality regulations as well as excellent service and knowledgable advice. The company has been manufacturing its RCG range of electric motors for three decades. The broad range of products at Royce Cross offers a one-stop shop for all electric motor and accessory needs.

CHAINs AND ACCEssORIEsThe century-year-old company, which has had many name changes, joined the Royce Cross Group in 2012. It began trading in 1914 as the Australian Elevator Company, evolving to become known as Chains and Accessories, Complete Drive Solutions then C&A. Chains and Accessories is recognised as an industry leader for its service and commitment to engineering-drive solutions, specialising in such mechanical power transmission components as chain, sprockets, racks, pinions, belts, gearboxes, variable-speed drives and pulleys, couplings and conveyor components.

AJF ELECTRICAL DIsTRIBUTORsAJF Electrical Distributors takes pride in being South Australia’s electrical, data and communication experts. Established more than four decades ago, AJF specialises in high-quality products with excellent service to assist industry. The team at AJF Electrical Distributors is trained in all its product range to ensure customers obtain the best advice. Staff are able to advise on everything from hazardous area applications and lightning protection to use of large Busway systems and data racking projects.

OU

R s

ER

vIC

EsABOUT US

REPAIRS & MODIFICATIONSThe expert team at Royce Cross Electric Motor Group can provide modifications to most electric motors and gearboxes. The service includes:

■ Removal of old fans for modern replacements■ Pulley and sprocket fitting to motor shafts■ Specialised shaft manufacturing to suit original motors■ Re-wiring and rewinding■ Upgrades to motor performance and winding temperature ratings■ Increasing IP ratings from IP55 to IP66 to most motors■ Various robust paint options available■ Cooling tower modification

MACHINING & CUSTOMISATIONManufacturing a specific component is among the specialty services offered by Royce Cross Group. The vast array of workshop services and machining includes:

■ Customisation of sprockets and pulleys■ Manufacturing shafts, rollers and sprockets■ Repairs to existing shafts and rollers■ Reverse engineering

RE

PAiR

S, M

OD

iFiC

ATiO

NS

& M

AC

HiN

iNG

ROYCECROSSGROUP

4

POWER & AUTOMATION■ vARIABLE-sPEED DRIvEsRoyce Cross Group’s large range of variable-speed brands, including ABB, Toshiba, Teco, Delta, Baldor, invertek and KB Penta, means we can offer the correct unit for purpose at the best price. Royce Cross Group also can assist with set-up. The models boast high torque, compact sizing and built-in EMI filters. Low and high-torque applications are covered by our range of variable-speed drives. The range comprises:

■ 0.37kW to 2.2kW 240-volt input■ 0.37kW to 500kW 415-volt input■ 480-volt SWER line models available■ DC inverters

■ General-purpose drives■ Medium-voltage AC drives■ DC drives■ Micro drives■ Machinery drives■ industrial drives■ HVAC and pump drives

Plug-and-play motor control convenience is achieved with ABB’s motor drives. The general purpose drives offer built-in features, simplifying drive selection, installation and use.Intuitive user interfaces provide quick drive set-up and commissioning. The drives adjust a motor’s rotating speed and torque. The range includes:

PO

WE

R &

AU

TOM

AT

ION

The competitive pricing is the main attraction of the Teco range of quality variable-speed drives. Teco’s IP66 washdown drive is hard to beat on price and reliability.

■ General-purpose drives■ HVAC and pump drives■ Compact OEM drives■ Medium voltage ■ Advance vector control

VAR

IAB

LE-S

PE

ED

DR

IVE

S



5

■ Limit switches, sensors and timers■ Control buttons, switches, pilot lights■ Emergency stop stations■ Custom design control stations and packages■ Auto transformer starters■ Contactors and overloads■ Circuit breakers■ Forward/reversing switches■ Electronic motor protectors■ Soft starters and direct on-line starters■ Star/Delta starters

■ MOTOR sTARTERs, PROTECTION & sWITCH gEAR

■ MOTION CONTROLThe vast range of motion and machine control solutions covers such industrial applications as labelling, packaging, bot-tling, pick and place, laser cutting/trimming, stacking, cut-to-length, flying shear, web feeders and high-speed rotary wrappers. The ABB range of products stocked by Royce Cross Group assists manufacturers reduce energy consumption, increase equipment uptime, minimise maintenance and increase productivity. The range comprises:

Flexible and reliable performance combine with quality in the vast range of motor starters and protection products. Key in Royce Cross Group’s product lines are the ABB motor starters and protection items, which comprise:

■ Single and three-phase motion control drives■ Servo motors■ inverter and vector drives■ Multi-axis motion controllers■ Auto transformer starters■ Operator panels ■ Single and multi-axis controls■ Digital and analog■ PCI format or stand-alone units with USB and serial interfaces■ Program via Baldor’s MintMT® (multi-tasking), embedded C or Active X® ■ Technologies, Device Net, ProfisbusDP, CANopen, ethernet

MO

TOR

sTA

RT

ER

sM

OTi

ON

CO

NTR

OL

ROYCECROSSGROUP

6

“On-the-go” portable label printers to identify and label on demand are the perfect tool for myriad industries, including electrical contractors, safety officers, warehouse managers and lab assistants. The range of Brady’s light-weight portable printers, which can be used anywhere for multiple purposes, include:

■ sPILL CONTAINMENTSpill control products to help contain and clean spills quickly in the event of an emergency and reduce the number of people exposed to the hazard . Brady’s extensive range assists to contain spills and reduce harm to the environment. The range includes:

■ BMP21 printer - voice/data comms, electrical, general industrial use■ BMP21-LAB - laboratory label printer for quick, accurate labelling■ BMP21-PLUS - tough with automatic formatting■ BMP41 - datacomm and electrical needs■ BMP51 - large display screen, easy-to-use label design apps■ BMP53 - compact, versatile with built-in Bluetooth® for technology for wireless printing■ BMP61 - labels cables, wire and components■ BMP71 - prints cable and wire labels, health and safety signs and labels

Royce Cross Group supplies thousands of high-performance labels designed for use with Brady’s benchtop and portable printers. The labels can be used for a variety of applications across many industries. The range includes:

■ Wire and cable identification■ Facility safety■ Voice and data communication identification■ Laboratory identification■ Floor labels■ indoor/outdoor labels

■ Absorbent spill kits■ Spill pallets, decks and berms■ Spill control and containment■ Floor labels■ indoor/outdoor labels

IDENTIFICATION & SAFETY■ PRINTERs

■ LABELs

ID &

sA

FET

yP

RiN

TER

S, LA

BE

LS &

SP

iLL CO

NTA

iNM

EN

T



7

■ LOCKOUT TAgOUT

■ sAFETyCreating a safe workplace is instrumental in the vast array of safety and security products carried by Royce Cross Group. The Brady products cover the gamut of safety and security needs, including:

■ Safety labels and tags■ Safety posters and signs■ Hard hat and safety labels■ Personal protection items■ Workplace mats■ Security seals, safety tags and signs

■ FIRsT-AIDComply with legislation requirements with Brady’s large range of first-aid kits and products, ranging from wall mount or portable kits to sports and high-risk survival kits. There’s also a range for specific industries, such as food and industrial manufacturing. Among the products are:

■ Safety labels and tags■ Safety posters and signs■ Hard hat and safety labels■ Personal protection items■ Workplace mats■ Security seals, safety tags and signs■ First-aid kits

■ Padlocks■ Lockout stations and devices■ Hard hat and safety labels■ Lockout tags and devices

ID &

sA

FET

y

Every year countless workers are killed or injured due to the unintentional release of hazardous energy sources. Numerous incidents could have been prevented with a clearly documented lockout tagout procedure. AJF Electrical Distributors offers a solution with Brady’s lockout tagout products. Brady offers a broad range of durable, easy-to-use lockout devices that cover most mechanical and electrical applications.Communicate safety and lockout information at the point of need with Brady’s wide selection of OSHA-compliant lockout/tagout tags. Brady’s lockout tags come in a variety of materials to suit various application needs. The lockout tagout range includes:

LOC

KO

UT

TAG

OU

T, S

AFE

TY &

FIR

ST-

AID

ROYCECROSSGROUP

8

PRE-INSULATED TERMINALS

■ Bullet terminals■ Cord end terminals ■ Cassette and double boot lace ferrules■ Closed end, parallel and pin connectors■ Flag terminals■ Flanged fork terminals■ Flat blade terminals■ Fork terminals■ Fully-insulated quick connectors

■ Hook blade terminals■ Inline joiners■ Insulating covers■ Male tabs■ Nylon-insulated butt connectors■ Part-insulated quick connectors ■ Piggy back connectors ■ Ring terminals

Red, green, yellow, blue, black, grey, white and clear are among the many colour options in the vast array of pre-insulated terminals stocked by AJF Electrical Distributors. The range includes:

LUGSThe vast range of lugs are made from high conductivity annealed copper. The array of sizes and types of quality lugs stocked by AJF Electrical Distributors includes:

■ Bell mouth■ Bolted■ Circuit breaker■ Copper sleeves■ Crimp■ Double grip■ Long barrel■ Palm long barrel

PR

E-IN

sU

LAT

ED

TE

RM

INA

LsLU

GS



9

ALLOY ELECTRIC MOTORS ■ sINgLE-PHAsE INDUCTION MOTORsGeneral-purpose, single-phase electric motors are available as totally enclosed fan cooled or open-drip-proof. They can be used in such applications as compressors, machine tools, pumps, fans, conveyors, material handling and many others.

FEATUREs:■ IP55 enclosure; IP upgrade available■ Foot or flange mount (B5, B14A, B14B)■ Multiple feet arrangements available■ Aluminium frame, end shields and base■ Metric frame (IEC)

FEATUREs:■ Terminal boxes included■ Insulation class B, IP20 continuous duty■ Coupling option to suit 3/4” bar

FEATUREs:■ Foot mount and foot/flange mount (B5, B14A, B14B)■ Multiple mounting arrangements available■ Aluminium frame, end shields and base■ Metric frame (IEC)■ IP55 enclosure■ IP upgrade available

MY RANGE - PSC

ML RANGE - CAP-START CAP-RUN

BARBECUE SPIT MOTORS

kW 2800rpm 1400rpm 0.06 -

0.09

0.12

0.18

0.25

0.37

0.55

0.75

1.1

1.5

2.2

3

Watts rpm torque 25 3 8Nm 60 3 10Nm

kW 2800rpm 1400rpm 900rpm 0.18 - - 0.25 - 0.37

0.55 - 0.75

1.1 - 2.2 - 3 - 4 - -

ALL

Oy

ELE

CT

RIC

MO

TOR

sS

ING

LE-P

HA

SE

IND

UC

TIO

N

ROYCECROSSGROUP

10

RO

LLED

sT

EE

L MO

TOR

sS

iNG

LE P

HA

SE

ROLLED STEEL■ IMPERIAL FRAME sINgLE-PHAsE

■ 37kW to 0.55kW capacitor-start only■ 0.75kW to 1.5kW capacitor-start, capacitor-run■ B56, NEMA and chicken feeder flanges available■ Lead and plug and on/off switch are options■ Rolled steel

FEATUREs:■ B56 and NEMA flanges available■ Optional lead and plug ■ 0.25kW to 0.55kW split phase■ 0.75kW capacitor-start, capacitor-run■ Rolled-steel body and alloy end shields■ On/off switch and plug-in lead for cement mixer option

FEATUREs:■ Foot mount■ Lead and plug optional■ Rolled steel body and cast-iron end shields■ Heavy duty design

kW 2800rpm 1400rpm 1400rpm 900rpm (65mm long shaft) 0.37 - 0.55 - 0.75 - 1.1 - - 1.5 - -

kW 1400rpm 900rpm 1400rpm (resilient mount) 0.25 - - 0.37 - - 0.55 -

0.75 -

kW 1400rpm 1.5

2.2

B56 GENERAL PURPOSE TEFC WITH 5/8″ SHAFT

B100S HEAVY DUTY TEFC WITH 24MM SHAFT

B56 GENERAL PURPOSE ODP WITH 5/8″ SHAFT

NOTE: Available as cement mixer electric motor.



11

BR

ICK

sA

W M

OTO

Rs

CH

iCK

EN

FE

ED

ER

MO

TOR

S

FEATUREs:■ 2800rpm■ Capacitor-start, capacitor-run■ ¾″ shaft■ DPFC and ODP■ Pressure switches in stock■ Supplied with lead and plug■ RCG motors boast 1.15 service factor

FEATUREs:■ Includes oil burner flange■ 0.37kW to 0.55kW cap-start only■ 0.75kW to 1.1kW cap-start, cap-run■ Shaft option ½″ or 5/8″■ Also available in three-phase■ TEFC

kW RCG CG 1.65

2 -

2.2

kW 1400rpm 0.37

0.55

0.72

1.1

FEATUREs:■ 1.7kW 2-pole TEFC■ Capacitor start/capacitor run (CS/CR)■ ¾″ shaft■ Thermal overload protection■ Switch and lead fitted on either RHS or LHS looking at the shaft

kW Switch RHS Switch LHS 1.7

Designed specifically for bricksaws, the Crompton motor includes an on/off switch.

Blade on shaft, flat saw motors also available.

BRICkSAW MOTORS

CHICkEN FEEDER MOTORS

COMPRESSOR DUTY MOTORS

ROYCECROSSGROUP

12

AIR

-MO

vE

ME

NT

MO

TOR

sS

iNG

LE P

HA

SE

AIR-MOVEMENT MOTORS■ sINgLE-PHAsE EvAPORATIvE

FEATUREs:■ 4/6-pole dual winding with centrifugal switch■ Supplied with lead■ B56 frame■ 5/8″ shaft motors with tapped windings are PSC■ Capacitor-run

kW 3-speed 2-speed dual winding speed variable speed 0.37

0.60

0.75

1.1

1.5

RCT BELT-DRIVEN RESILIENT MOUNT

The diverse RCT range of RCG air movement and general purpose motors delivers multiple applications for refrigeration, reverse cycle, evaporative and ducted heating solutions.

FEATUREs:■ Thermal fuse■ Distinctive snap and fit four-in-one design■ 5/16″ shaft

RCT52 FRIDGEMASTER SERIES

RCT PAD-MOUNT SHAFT-DOWN AXIAL FAN MOTORS

Part no Watts Amps Rpm Speed Cap size Cap Rotation Volts out uF/V supplied direction

RCGAVAC600 600 4.6 1400 variable 25no CW 240

RCGAVAC750 750 4.9 1400 variable 25 no CW 240

RCG part Fasco parts RCGAVAC600 80855BPVC-A11S

RCGAVAC750 80855BQVC-A11S

watts pole cap supplied reversible shaft 13 4 single 20 4 single 40 4 double

FEATUREs:■ Clockwise at drive-end shaft■ Designed to international standards■ Auto reset thermal overload■ Interchangeable with other brands■ Permanent-split capacitor design■ Totally enclosed, four-pole, single-phase■ Dynamically balanced rotors■ Suitable for Triac control■ 5/8″ shaft■ CE certified■ Non-reversible



13

AIR

-MO

vE

ME

NT

MO

TOR

s B

LOW

ER

& C

ON

DE

NS

ER

MO

TOR

S

NOTE: Can be mechanically reversed by removing the rotor then re-assembling in the opposite direction.

FEATUREs:■ Permanent split capacitor design on 1hp motors■ Low noise bearings■ Auto reset thermal overload on 1hp motors■ ½″ shaft

watts pole cap supplied reversible speed 180 4 single 150 6 multi 250 6 single 300 6 * single 370 6 multi 425 4 * multi 550 4 multi

RCT85 SINGLE-SHAFT CONDENSOR MOTOR

* NOTE: Can be mechanically reversed by removing the rotor then re-assembling in the opposite direction.

FEATUREs:■ Dynamically balanced rotors■ Permanent split-capacitor design■ ½″ shaft

RCT85 SINGLE-SHAFT BLOWER MOTOR

watts pole cap supplied reversible speed 250 4 * yes multi 290 4 ✗ * yes multi 315 4 ✗ * yes multi 350 4 ✗ * yes multi 365 4 ✗ * yes multi 425 4 * yes multi 600 4 * yes multi 750 4 * yes multi

watts pole reversible speed 180 4 single 250 6 single 370 6 single 550 6 single

ROYCECROSSGROUP

14

AIR

-MO

vE

ME

NT

MO

TOR

sE

VAP

OR

ATiVE

FAN

MO

TOR

S

FEATUREs:■ Dynamically balanced rotors■ Permanent split- capacitor design■ ½″ shaft

watts pole cap reversible speed ODP TE supplied 80 4 multi

100 4 multi

130 4 multi

250 4 multi

290 4 ✗ multi

315 4 multi

350 4 ✗ multi

365 4 ✗ multi

425 4 ✗ multi

600 4 multi

750 4 multi

40 6 multi

200 6 multi

RCT85 DOUBLE-SHAFT BLOWER MOTOR

FEATUREs: ■ Low noise and long-life bearings■ Designed to international standards■ Auto-reset thermal overload on single and three-phase motors■ Interchangeable with other brands

■ Permanent split-capacitor design■ 4-pole■ Dynamically balanced rotors■ CE certified■ Design suitable for Triac control available on request

EVAPORATIVE DIRECT DRIVE FAN MOTORS RCT SHAFT-UP WITH EXTENDED-THROUGH BOLTS

watts pole cap supplied speed 600 4 ✗ variable 750 4 ✗ variable 1000 4 ✗ variable

FEATUREs: ■ Low-noise and long-life bearings■ Auto-reset thermal overload on single and three-phase motors

■ Interchangeable with other brands■ Permanent split-capacitor design■ Design suitable for Triac control available on request

RCT BAND-MOUNT SHAFT-DOWN

watts pole cap supplied speed 425 4 multi 600 4 multi 750 4 multi 950 4 multi



15

AIR

MO

vE

ME

NT

MO

TOR

sFA

N M

OTO

RS

FEATUREs: ■ Low noise and long-life bearings■ Designed to international standards■ Interchangeable with other brands■ Used for heating and cooling applications■ CE certified■ Dynamically balanced rotors

RCT EXTENDED NON-DRIVING SHAFT & TACHO GROOVE IN REAR ENDSHIELD

FEATUREs: ■ Low noise and long-life bearings■ Designed to international standards■ Auto reset thermal overload on single and three-phase motors, three-phase with 5/8″ shaft, single-phase with ¾″ shaft■ Interchangeable with other brands■ Permanent split-capacitor design for single-phase■ 6-pole■ CE certified■ Design suitable for Triac control available on request

RCT LARGE LUG-MOUNTED FAN MOTORS

watts pole phase speed 375 6 three single 400 6 single two

FEATUREs: ■ Low noise and long-life bearings■ Designed to international standards■ Auto-reset thermal overload■ Interchangeable with other brands■ Permanent split-capacitor design■ 4-pole■ Dynamically balanced rotors■ CE certified■ Design suitable for Triac control■ Clockwise drive-end■ Resilient mount with plug

RCT SPECIAL FAN MOTORS

watts pole capacitor speed 425 4 single

watts pole cap supplied speed 250 4 ✗ variable 310 4 ✗ variable 315 4 variable 500 4 ✗ variable 600 4 ✗ variable 650 4 ✗ variable 750 4 ✗ variable

ROYCECROSSGROUP

16

CA

sT-IRO

N M

OTO

Rs

THR

EE

PH

AS

E

FEATUREs:■ 0.55kW to 550kW■ 2 to 8-pole■ Foot and foot/flange mounting available■ Multiple mounting arrangements available ■ Terminal box on top as standard■ IP66 protection■ Two-part epoxy paint■ Alloy or cast fan on request■ Class F insulation with class B temperature rise■ Other insulation class, including class H, and other speeds available on request

RCG MINING MOTOR

CAST IRON ■ THREE-PHAsE

FEATUREs:■ 0.55kW to 550kW■ 2 to 8-pole■ Other speeds available on request■ Foot and foot/flange mounting available■ Multiple mounting arrangements available■ Terminal box on top as standard■ IP55 protection, IP56, IP66 available on request■ Class F insulation with class B temperature rise■ Other insulation class available on request■ Thermisters are standard for frames D160 and larger■ Brake motors D80 to D315 available on request

RCG INDUSTRIAL MOTOR

FEATUREs:■ 0.55kW to 550kW (above 200kW is Maxe 3 mining motor)■ Foot and foot/flange mounting available■ Terminal on right-hand side from drive-end shaft■ 2 to 8-pole■ IP66 protection■ Class F insulation with class B temperature rise and Class H available on request■ 50Hz, three-phase AC supply■ IE3 high-efficiency motors■ Service factor 1:15 at 40°C ambient

TECO MAXE 3 PREMIUM SEVERE DUTY



17

ALL

Oy

& R

OLL

ED s

TEEL

THR

EE

PH

AS

E

FEATUREs:■ Available in Exde, Exd, Exe, Extd (DIP), ExnA■ 0.18kW to 560kW, D71 to D355 frames■ Foot and foot/flange mounting available■ Terminal box on the right-hand side looking at the drive-end shaft■ 2 to 8-pole■ IECEx certified■ Class F and class H insulation available■ Low temperature rise for substantial thermal reserve■ IP55, IP66 and hazardous brake motors also available

,

HAZARDOUS AREA MOTORS

ALLOY & ROLLED STEEL ■ THREE-PHAsE

FEATUREs:■ 0.06kW to 15kW■ 2 to 8-pole■ S1 duty, class F insulation with class B temperature rise■ IP55 protection; 21 upgrade available■ Multiple feet locations and mounting arrangements■ High output versions for reduced frame size and weight

FEATUREs:■ Imperial B56 frame■ Class F, IP55■ Various flanges available■ TEFC

kW 2800rpm 1400rpm 900rpm 0.37 0.55 0.72

1.1

RCG ALLOY THREE-PHASE

B56 GENERAL PURPOSE TEFC WITH 5/8″ SHAFT

FEATUREs:■ 0.09kW to 90kW■ 56 to 250 frame sizes■ High output versions for reduced frame size and weight■ Wide voltage range■ Suitable for DOL and VSD applications ■ Other brands available

ABB ALLOY INDUSTRIAL MOTORS

ROYCECROSSGROUP

18

ALLO

y M

OTO

Rs

BR

AK

E &

iMP

ER

iAL M

OTO

RS

ALLOY■ THREE-PHAsE

FEATUREs:■ 0.06kW to 15kW■ 2 to 8-pole■ S1 duty, IP55 protection■ Class F insulation with class B temperature rise■ Foot and foot/flange■ IEC frame 63 to 132 also available■ Flanges NEMA, B5, B14A and B14B available■ imperial brake motors available

FEATUREs:■ 0.25kW to 7.5kW■ 2 to 8-pole■ 80 to 132M frame■ IP55 protection■ Foot and foot/flange■ Multiple feet locations■ Multiple mounting arrangements available■ Class F with class B temperature rise■ 240-volt/415-volt Delta/Star for 3kW or less■ 415-volt/720-volt Delta/Star for 4kW and above■ imperial brake motors available

FEATUREs:■ 0.12kW to 15kW■ 2 to 6-pole■ 63 to 160L frame■ Foot and foot/flange■ Multiple feet locations■ Multiple mounting arrangements available■ Class F with class B temperature rise■ 240-volt/415-volt Delta/Star up to 100L frame■ 415-volt/720-volt Delta/Star 112M and 132M frame■ Cast iron brake motors to 315 frame available

GD SERIES NEMA/IMPERIAL FRAME

CG ALLOY AC BRAkE MOTOR WITH DC OR AC BRAkE

RCG SERIES ALLOY AC MOTOR WITH AC OR DC BRAkE

NOTE: Not all sizes available on all speedsDC brake supplied with 240-volt AC up to 100L frame, rectified to 110-volt DC; 415-volt AC from 112M to 132M rectified to 190-volt DC frame; some variance with 6 and 8-pole.

NOTE: Not all sizes available on all speeds; some some variance with 6-pole and 8-pole.



19

TH

RE

E P

HA

sE

MO

TOR

sW

AS

HD

OW

N &

DC

FEATUREs:■ Three phase■ 0.37kW to 15kW■ TEFC and TENV enclosures■ Labrynth seals■ Standard and super-E efficiency■ IEC ratings available

AC ALL STAINLESS WASHDOWN DUTY MOTORS

DC MOTORSFEATUREs:■ SCR-rated 12, 24, 36, 48, 90 or 180-volt■ 0.02kW to 2.2kW■ TENV and TEFC enclosures■ C-face with base■ Tacho adaptable■ Explosion-proof ¼hp to 1.5hp on request■ Integral tacho ¼hp to 5hp on request

WASHDOWN DUTY

NORD ANTI-CORROSIVE WASHDOWN DUTY MOTORS

DC MOTORS & GEARED MOTORS

FEATUREs:■ Corrosion resistant and non flaking■ Lighter than stainless steel■ Available in helical gear units, two-stage bevel gear unit, SMI worm unit, three-phase motor, motor starter and frequency inverter■ Ideal for extreme weather conditions

FEATUREs:■ Permanent magnet motor■ Continuous duty■ TENV■ IP54 protection■ Hardened steel worm■ Reversible■ Suitable for horizontal or vertical mounting

DC GEARED MOTORS

ROYCECROSSGROUP

20

gE

AR

MO

TOR

sR

ED

UC

ER

S &

VAR

iATOR

S

GEAR MOTORS ■ REDUCERs AND vARIATORsRoyce Cross Group is a leading supplier of drive and automation technology. It stocks an extensive range of gear motor products from such leading brands as Transtecno, Nord, Motovario, Siti, STM, SEW, Bonfiglioli, Pujol, Rossi and RCG. Products include:

■ 0.25kW to 22kW ■ Robust one-piece high-strength cast-iron housings ■ High degree of modularity ■ Motor connection by flexibility coupling ■ Quality expoxy RAL7016 0.10 to 0.15mm thickness ■ Lubrication with synthetic oil ■ Up to 3500Nm of torque NOTE: Industrial helical gear unit max 250,000Nm, 4000kW

■ 0.06kW to 4kW (7.5kW for worm gearboxes)■ Ground-hardened helical gears■ Diecast aluminium housings and input flange■ Cast-iron feet and output flanges (inline units)■ Permanent synthetic oil, long-life lubricant■ High degree of modularity■ Up to 1000Nm of torque

■ ALLOy gEARBOX FEATUREs:

■ CAsT-IRON gEARBOX FEATUREs:

■ Helical in-line gearboxes■ Helical bevel right-angle gearboxes■ Worm right-angle gearboxes ■ Worm double reduction gearboxes■ Single-stage helical (pre-stage) gearboxes■ Torque Arm shaft-mount reducers■ Agricultural gearboxes■ Mechanical variators■ Varspe Hydrostatic drives (for high torque, explosion-proof and wash-down applications)



21

EN

CLO

sU

RE

sP

OW

DE

R C

OAT

ED

& S

TAIN

LES

S S

TEE

L

ENCLOSURES ■ POWDER-COATED METAL

■ sTAINLEss sTEEL

Made from continuous lengths of sheet steel, which is double folded at the front, Royce Cross Group’s enclosures boast a metal body thickness of 1.2mm. Each back panel is welded to the frame while the enclosures are dust and waterproof to IP66.Externally and internally protected with polyester epoxy resin, the enclosures have welded studs on the back panels for direct fixing to mounting plates or other accessories.Each unit has easily removable hinges, allowing a left or right-hand door opening of more than 120 degrees. Other features include foamed-in polyurethane gaskets and front rain gutters, mounting and gland plates and lock system. Testing reports are available on request. Accessories include: ■ Louvre plates ■ Insulated cable gland plates ■ Canopies ■ Cubicle suite joining sets ■ Reinforced joining parts ■ Wall-fixing brackets ■ Eye bolts

Boasting monoblock watertight AISI316 stainless steel and Scotch brite (AST)-type mechanical polish, Royce Cross Group’s enclosures include mounting and gland plates, stainless-steel nuts, screws, hinge pins and lock levers. They are suitable for corrosive and hygienic environments as well as being dust and waterproof resistant to IP66.

Part no. height x width x depth ELIPMET2520/150 250mm x 100mm x 150mm ELIPMET3020/200 300mm x 200mm x 200mm

ELIPMET3030/200 300mm x 300mm x 200mm










Part no. height x width x depth ELIPSS2020/150 200mm x 200mm x 150mm ELIPSS2520/150 250mm x 200mm x 150mm ELIPSS3020/200 300mm x 200mm x 200mm ELIPSS3030/220 300mm x 300mm x 200mm ELIPSS4030/250 400mm x 300mm x 250mm ELIPSS4040/250 400mm x 400mm x 250mm ELIPSS5040/250 500mm x 400mm x 250mm ELIPSS5040/300 500mm x 400mm x 300mm ELIPSS6040/250 600mm x 400mm x 250mm ELIPMET6040/300 600mm x 400mm x 300mm ELIPMET6060/300 600mm x 600mm x 400mm ELIPMET7050/300 700mm x 8500mm x 300mm ELIPSS8060/300 800mm x 600mm x 300mm ELIPSS8080/300 800mm x 800mm x 300mm ELIPSS1212/400 1200mm x 1200mm x 400mm ELIPSS1010/400 1000mm x 1000mm x 400mm

ROYCECROSSGROUP

22

DA

TA &

CO

MM

UN

ICA

TIO

NR

AC

KS

, CO

NN

EC

TOR

S, FiB

RE

OP

TiCS

DATA & COMMUNICATIONRoyce Cross Group is one of the largest stockists of structural cabling products for voice, data and fibre optic cabling in South Australia. Integrated fibre and copper solutions are available for such industries as:

■ Banking■ Broadcast■ Construction■ Data centres■ Defence■ Education

■ industrial■ Mining■ Oil and gas■ Security■ Telecommunications■ Utilities

■ FIBRE OPTIC CABLINg

■ Distribution frames■ Fibre assemblies■ Fibre enclosures and racks■ Fibre optic cables ■ Fibre optic management & ducting■ Fibre termination & splicing ■ Harsh environment fibre assemblies■ MTP cabling systems - plug-and-play solutions■ Networking switches & media convertors■ Test & inspection

Solutions for internal and external cabling is guaranteed with Royce Cross Group’s fibre optic range. Our range includes:

■ COPPER DATA CABLINgRoyce Cross Group offers full end-to-end Cat5E, Cat6 and Cat6A solutions for copper data cabling systems. Our extensive product range include:

■ indoor & outdoor LAN cables■ Standard & miniature patch leads■ 10˝ & 19˝ patch panels■ Connectors & wall plates■ 10˝ wall enclosures & accessories■ 19˝ wall & free-standing racks■ Networking switches & media converters■ TerminatIon and testing tools■ Certifying & testing equipment



23

DA

TA R

AC

Ks

UP

S, A

CC

ES

SO

RiE

S

■ 19˝ RACKsAs a complete cabling system supplier, Royce Cross Group offers an extensive range of 19” racks suitable for many industries. Our range includes Australian-made and imported products from such brands as AFL Australia, Amdex, Argent, Global and Rackworld. Our product range includes:

■ RIELLO UPsEfficiency, resilience and power quality are features of the Riello UPS range, which aims to provide continuous energy. UPS provides consistent back-up power during inconsistent power issues. There are many UPS options available to meet all requirements. The Riello UPS product range includes:

■ 400VA to 800kVA UPS■ Off-line, line interactive & double conversion online UPS■ Tower and 19˝ mounted racks■ Monitoring & communication software

■ Audio racks■ B & C class SCEC-endorsed racks■ Channel racks■ Data centre racks■ Outdoor IP-rated racks■ RFi/EMi racks■ Server racks■ Soundproof racks■ Wall-mounted racks■ Rack accessories:

■ Horizontal & vertical power panels■ Intelligent power distribution panels■ Integrated KVM console & LED monitors

■ ELECTRICAL ACCEssORIEsRoyce Cross Group has all electrical needs covered with its vast range of electrical accessories, including:

■ Combination switches & sockets■ Wall-mount switches & sockets■ Extension sockets■ Three-phase straight or angled plugs■ isolators■ Forward/reverse switches■ Tools■ Cable rodders■ Nylon, natural, ultra-violet and colour cable ties

ROYCECROSSGROUP

24

CH

AIN

CHAINAnti-corrosive, lube-free, stainless steel, special attachment and conveyor chains are among the vast range and grades available at C&A Chains and Accessories.C&A also stocks the vast top-quality Tsubaki chain. Chains are available in sizes ranging from ASA 25 or 05B to ASA200 or 32B in single, double or multiple strands.C&A provides a custom-made service for customers, manufacturing single or multiple runs to precise tolerances and exact dimensions. The chain range includes:

■ AgRITUFF ■ Developed by Tsubaki specifically for the agricultural industry ■ Boasts solid rollers for longer-wear life in harsh operating conditions ■ Extra heat treatment of pins results in longer chain life ■ Features quad riveted pins for side plate security

■ INDUsTRIAL ■ The Premium G7 Series has solid bushes with lube grooves for increased life ■ The chain’s metal has been shot peened to reduce stress in parts ■ Ring-coin process reduces the chance of cracking of side plates and increases chain strength

■ HT & sUPER sERIEs ■ Boasts the same features as the industrial chain range ■ The chain’s heavier side plates provide increased strength ■ Tensile strength up to 40 per cent more than standard chains

■ NEPTUNE ■ Corrosion-resistant chain for outdoor and wet environments ■ Steel construction for long life ■ All parts individually impregnated ■ Ideal for use where stainless-steel chain is not robust enough

■ LAMBDA ■ Lube-free for life, making it cleaner and easier to maintain ■ Lasts up to seven times longer than traditional chains ■ All impregnanted sintend bushes and special coated pin for long trouble-free life

■ BEvEDOLPHIN ■ Tsubaki’s plastic-top chain ■ Special double-layer D-type plastic pins ■ Wear resistance in contact with water

■ CONvEyOR CHAINs ■ Includes double-pitch chains, hollow-pin types, standard and large rollers ■ Bush chain ■ BS and metric conveyor chains

CH

AiN

GR

AD

ES



25

sP

RO

CK

ET

s G

EA

RS

& R

AK

CS

SPROCkETS C&A Chains and Accessories’ range of sprockets are made with high-quality steel and boast induction-hardened teeth for longer wear. The range covers 1/4″ pitch ASA 25 to 2½ pitch ASA 200. Components can be customised to suit any application.

GEARS & RACkS■ gEARs ■ Made from cast-iron and K1045 steel ■ Custom made to order ■ 24dp to 3dp, module 1 to module 8 ■ Up to 1.6m diameter ■ Stainless steel, plastic, bronze, geartex, aluminium and tool steel - special manufacture to order

Used to convert rotating movement into linear motion, our range of racks boast strong teeth. They are offer high rigidity.

■ RACKs

■ sPUR gEARsThe range of imperial and metric spur gears are manufactured from steel material. They can be customised to suit specific applications.

ROYCECROSSGROUP

26

BE

LTs

& P

ULLE

ys

CO

UP

LiNG

S

Used in many applications, the vast range of belts available from C&A Chains and Accessories includes timing belts, V belts, conveyor and ribbed belts. The belts compliment our range of pulleys. Used in such applications as motion or power transmission in machines, the top-quality belt varieties include:

Chains & Accessories stocks a large range of cast-iron and aluminium pulleys. A, B, SPA, SPB pulleys in single, double and triple row are among the many types on offer. They are available in cast-iron and aluminium. Machining to fit locking elements and bore/keyway options is available. The range comprises:

■ PULLEys

■ BELTs

■ HDT■ Banded■ Poly■ Timing■ A, B and C section V belts

■ Chain■ Disc■ Spider■ Cone ring■ Taper lock■ Torque limited■ Tyre■ Gear

Reliable, quality couplings are part of Royce Cross Group’s power transmission components. The large range includes jaw couplings (HRC), chain couplings, cone-ring couplings and gear couplings. Among the types available are:

■ COUPLINgs

■ 1A, 1B, 2A, 2B, Stepped A■ SPA, SPB, SPC, SPZ■ Tapered and standard bore■ Taper lock■ Flat belt■ Timing belt

■ Agricultural■ Two and four-stroke go-kart

Clutches for use to limit pulleys or sprockets being engaged at idle speed are carried by Royce Cross Group. Our extensive range of centrifugal clutches include:

■ CLUTCHEs



27

CO

Nv

Ey

OR

CO

MP

ON

EN

Ts

STA

ND

AR

D M

AC

HiN

E E

LEM

EN

TS

CONVEYOR COMPONENTS Chains & Accessories can supply conveyor systems to get products moving and speed the flow of goods. The range of components includes: ■ Castor frames ■ Mountings - bolt-hole or plate-mount ■ Wheels - rubber or nylon ■ Drive bands ■ Drive pulleys ■ Speed-up pulleys ■ Positive-drive high-torque pulley clips ■ Slave drive jump chain assemblies ■ End guards and stops ■ Guide rails

Chains & Accessories are agents for Siegling conveyor belts. Our range of conveyor equipment includes:

■ gRAvITy CONvEyORs ■ Basic frames - galvanised, painted or stainless-steel ■ Rollers - black steel, galvanised, PVC or polyprop ■ Skate wheels - plastic or steel ■ Support stands - height adjustable in five sizes

■ ROLLER CONvEyORs ■ Used for food, packaging, beverage, warehouses and factories ■ Can grow as company changes or diversifies ■ Straight or curved sections, gates and junctions ■ Ease of installation ■ Bolted permanent connections or hook-on for easy re-location

■ MINI BELT CONvEyORs ■ Ideal for small parts conveying and light applications ■ Bolt-on feet and side rails available

CABLE CARRIERSLoad capacity, durability and longevity are among considerations in choosing the correct cable carrier for each application. Tsubaki’s Kabelschlepp cable carriers are made from steel, high-grade stainless steel and plastic with aluminium stays in standard sizes or tailor-made to individual requirements in millimetre units. Steel, plastic and hybrid and open and closed designs are among the options for Kabelschlepp. The vast range of products include: ■ Hybrid cable carriers with variable chain width ■ Covered solid plastic and hybrid cable carriers ■ Steel cable carriers ■ Covered steel cable carriers ■ Ready-to-assemble cable carrier systems

ROYCECROSSGROUP

28

DU

CTW

AY RA

CE

WAY, FU

SE

GE

AR

■ Stockings■ Rollers and guides■ Rodding systems■ Winches

■ Lubricants■ Rollers■ Jacks■ Swivels

The vast range of cable installation products available through AJF Electrical Distributors includes:

A diverse range of Australian-made earth and neutral links is stocked by AJF Electrical Distributors. We are a distributor for NEtec, which specialises in numbered tunnels. The product range includes:

■ 100 to 500-amp covered links■ Neutral and earth bars

■ Insulating feet■ Screws and bolt clamps■ Accessories

CABLE-LAYING PRODUCTS

COVERED & BARE LINkS

■ Cable entry and exits■ Reducers■ Tubing■ Drop-off kits and drop components■ Suspension and mounting kits

There are many mounting options for the ducting race-way manufactured by Warren and Brown Technologies. The WBT YellowDuct fibre optic ducting raceway can be mounted from walls, ladder racks, unistrut, raised floor support brackets and on floors. The products include:

DUCTING RACEWAY

■ Conduit, cable, beam and purlin clips■ Stud wall grommets■ Data supports■ Ceiling and acoustic applications

Fixing equipment, from basic purlin clips to the latest speed links, is a vast and constantly growing range of products from Caddy. Boasting speedy installation time and competitive prices, the Caddy line includes:

■ Two-amp to 800-amp BS88 fuses■ Fuse holders■ Cylinder fuses

A wide range of circuit protection devices is always in stock at Royce Cross Group. As a distributor for Eaton’s Cooper Bussmann range, there is a product to suit all industrial and general applications. The range includes:

ELECTRICAL FIXINGS, FASTENERS & SUPPORTS

FUSE GEAR

CA

BLE

-LAyIN

g &

LINK

s



29

Protect your assets from the harmful effects of a direct lightning strike. Lightning can cause major problems to power, data and telecommunication equipment and people. AJF Electrical Distributors offers a range of lightning protection systems from Australian company Lightning Protection Industries to meet specific requirements. LPI offers three types of direct strike protection systems, which include the full package of air terminals and accessories:

■ Stormaster ESE range of terminals ■ conventional lightning protection system ■ Guardian System 5 provides a purpose-designed package for direct lightning protection

LIGHTNING PROTECTION

Power surges and spikes cause millions of dollars in damage. It is a common cause of electronic equipment failure, performance disruption and unscheduled system downtime. AJF Electrical Distributors carries Australian-designed products by Lightning Protection Industries. The range includes:

■ Power surge and transient protection■ Communications and data protection■ Earthing■ Powerlines

LPI® provides an extensive range of earthing products for the installation of a low-impedance earthing system. Whether installing a dedicated lightning earth or a facility earth grid, it is essential to ensure personnel safety and provide an effective earth to limit disruptions to services. LPI® Exoweld exothermic welding process is a safe and efficent way to provide a permanent connection between conductors. LPI products carried by AJF Electrical Distributors include: ■ Copper-bonded and stainless-steel earth rods ■ Copper and stainless-steel earth braids ■ Clamps and tapes ■ Pre-engineered ground grids and meshes ■ Chemical earth rods ■ Earthing accessories

■ EARTHINg & gROUNDINg

■ sURgE & sPIKE PROTECTIONLI

gH

TN

INg

PR

OT

EC

TIO

NE

AR

THiN

G, G

RO

UN

DiN

G &

SU

RG

E P

RO

TEC

TiO

N

ROYCECROSSGROUP

30

HA

zA

RD

OU

s A

RE

A E

qU

IPE

MN

TLiG

HTiN

G, E

NC

LOS

UR

ES

HAZARDOUS AREA EQUIPMENTEnhancing safety and productivity in industrial and commercial environments is overcome with the many and varied products produced by Eaton Crouse-Hinds.

■ Cable glands ■ Conduit device boxes ■ Elbows, couplings, hubs, plugs, reducers,unions ■ Conduit seal, breathers, drains ■ Conduit bodies, outlet boxes ■ Visual and audible signalling devices

■ FITTINgs & gLANDs

■ LIgHTINgAdvanced industrial lighting solutions are covered by Eaton Crouse-Hinds’ range for hazardous areas. Hazardous area lighting offers superior illumination, flexibility and safety in the most demanding environments. The lighting products can be used in such applications as oil and gas exploration and production, petrochemical facilities, wastewater treatment plants, pulp and paper production, aluminum processing facilities, salt and potash mines, pharmaceutical and additives formulation and processing and many more. They can be used in locations with high temperatures, marine environments, combustible dust and other hazardous areas.

Time tested and innovative conduit industrial fittings, cable glands and cord connectors move power simply and safely in any electrical installation. The products on offer from Eaton Crouse-Hinds include:

■ ENCLOsUREsAdvanced industrial lighting solutions are covered by Eaton Crouse-Hinds’ range of lighting for hazardous areas. The lighting offers superior illumination, flexibility and safety in the most demanding environments. The hazardous lighting caters for use in such applications as oil and gas exploration and production, petrochemi-cal facilities, wastewater treatment plants, pulp and paper production, aluminum processing facilities, salt and potash mines, pharmaceutical and additives formulation and pro-cessing and many more. They can be used in locations with high temperatures, marine environments, with combustible dust and other hazardous areas. Some of the range includes: ■ Explosion-proof enclosures ■ Explosion-proof junction boxes ■ Explosion-proof equipment housing ■ Custom-built control panels



31

HE

AT

sH

RIN

KB

US

DU

CT

SY

STE

MS

■ Heat shrink reels ■ Heat shrink end caps, gloves, cable repair sleeves ■ Medium-wall, adhesive-lined heat shrink ■ Thick wall, adhesive-lined heat shrink ■ Tubing lengths

HEAT SHRINkThe areas in which heat shrink can be used vary widely. AJF Electrical Distributors stocks a range of tubing and moulds to suit all applications, providing protection against mechanical, environmental, chemical or electrical effects. The products include:

Vass Electrical Industries is Australia’s only comprehensive manufacturer and largest supplier of electrical busway/busduct systems and products. The range encompasses type-tested 80-amp to 12, 100-amp busway systems in feeder, bolt-on and plug-in configurations for AC and DC applications. Vass products include: S Series ■ Three-phase and neutral 80 to 700 amps ■ Single phase to 160 amps ■ Prefabricated ■ Plug-in power, take-off boxes H Series ■ Power distribution system for high-rise buildings (hospitals, mines and heavy industries) ■ Superior ‘Sandwich’ type construction ■ Dangerous goods and spill control ■ Sizes ranging from 800 to 7000 amps

VASS BUSDUCT SYSTEMS

STANDARD MACHINE ELEMENTSChains & Accessories stocks the extensive Elesa+Ganter range of standard machine elements. The products include: ■ Operating elements ■ Clamping knobs ■ U-handles ■ Hinges ■ Indexing elements ■ Rotary controls ■ Fixed, revolving and fold-away handles ■ Toggle, power and hook clamps ■ Latches

ROYCECROSSGROUP

32

ROyCECROssgROUP


) 08 8269 6400roycecrossgroup.com8

roycecrossgroup.com) 08 8269 40008

roycecrossgroup.com) 08 8444 67008

● Data● Communications● Electrical● UPS● Racking

● Lightning protection● Hazardous equipment● LV products● Variable-speed drives● Printing systems

● Air-movement motors● Electric motors● DC low-voltage motors● Geared motors● Capacitors

● Rewind & repairs● Variable-speed drives● Mining motors● Enclosures● Electrical accessories

● Chains● Sprockets● Drives● Motors● Gears

● Racks● Belts● Pulleys● Conveyor items● Accessories

Proudly South Australian

HEAD OFFICE:3 Cord Street, Dudley Park SA 5008

) 08 8269 4000 [email protected]

POSTAL: PO Box 239 Churchill Centre, kilburn North SA 5084; OPEN: 8.00am - 5pm Monday - Friday

8

ROyCECROssgROUP · labels, lockout tagout and spill containment 08 TERMINALs & LUgs Pre-insulated...

Documents

Transcript of ROyCECROssgROUP · labels, lockout tagout and spill containment 08 TERMINALs & LUgs Pre-insulated...