ROYCECROSSGROUP Cross...20 GEAR MOTORS Reducers and variators 21 ENCLOSURES Powder-coated metal and...

©All Royce Cross Group products are subject to change. RCG reserves the right to modify the design, technical specifications and dimensions without prior notice. E&OE. roycecrossgroup.com 08 8269 4000

ELECTRICAL & MECHANICAL ENGINEERING SUPPLIES

1

ROYCECROSSGROUP

ELECTRICALDISTRIBUTORS

G E N E R A L C A T A L O G U E


roycecrossgroup.com

Royce Cross Group overview 2020.indd 1Royce Cross Group overview 2020.indd 1 17/8/20 2:08 pm17/8/20 2:08 pm

©All Royce Cross Group products are subject to change. RCG reserves the right to modify the design, technical specifications and dimensions without prior notice. E&OE.

ROYCECROSSGROUP

2

IND

EX

INDEX04 POWER & AUTOMATION Variable speed drives, soft starters, motor

starter protection, star/delta starters and motion control

06 IDENTIFICATION & SAFETY Brady portable printers, first-aid, signs,

labels, lockout tagout and spill containment

08 TERMINALS, LUGS & VARIATORS Pre-insulated terminals, copper lugs and

speed variators

09 ELECTRIC MOTORS Alloy single and three-phase induction,

cement mixer, imperial general-purpose,

compressor duty, bricksaw, cast-iron

three-phase, hazardous environment, air

movement, evaporative fan and belt-drive,

brake, drain cleaner motors and DC motors

20 GEAR MOTORS Reducers and variators

21 ENCLOSURES Powder-coated metal and stainless-steel

22 DATA & COMMUNICATION Racks, cabling, UPS, connectors, fibre optics,

cable ties and accessories

24 CHAIN Agrituff, Industrial, NEP, Super, Lambda

and conveyor chain

25 SPROCKETS, RACKS & GEARS Sprockets, gears, spur gears and racks

26 BELTS, PULLEYS & COUPLINGS Timing, V, conveyor and ribbed belts, cast-iron and

aluminium pulleys and various couplings

27 CONVEYOR COMPONENTS Conveyor systems and products

28 CABLE-LAYING, LINKS, BUSWAY, FIXINGS & FUSE GEAR Cable-laying products, covered and bare links,

ducting raceway, electrical fixings, fasteners and

supports and fuse gear

29 LIGHTNING PROTECTION Direct strike protection systems, earthing and

grounding, surge and spike protection products

30 HAZARDOUS AREA EQUIPMENT Fittings and glands, lighting and enclosures

31 HEATSHRINK & BUSDUCT SYSTEMS Heat shrink reels, end caps, gloves, tubing lengths,

Vass busway/busduct systems and products

BUY ONLINEwww.roycecrossgroup.com


BU

Y ON

LINE




3

A family-owned business based at Dudley Park, South Australia, the Royce Cross Group comprises three companies: Royce Cross Electric Motor Group; Chains and Accessories; and AJF Electrical Distributors.All strive to offer an extensive range of high-performance and quality products as well as exceptional service.

ROYCE CROSS ELECTRIC MOTOR GROUPFounded by Royce Cross more than 45 years ago, Royce Cross Electric Motor Group is a market leader in the efficient, quality service and supply of electric motors and accessories. During the past four decades, the company has delivered products that meet efficiency standards and quality regulations as well as provided knowledgable advice. The company has been manufacturing its RCG range of electric motors for three decades. The broad range of products at Royce Cross offers a one-stop shop for all electric motor and accessory needs.

CHAINS AND ACCESSORIESThe century-year-old company, which has had many name changes, joined the Royce Cross Group in 2012. It began trading in 1914 as the Australian Elevator Company, evolving to become known as Chains and Accessories, Complete Drive Solutions then C&A. Chains and Accessories is recognised as an industry leader for its service and commitment to engineering-drive solutions, specialising in such mechanical power transmission components as chain, sprockets, racks, pinions, belts, gearboxes, variable-speed drives and pulleys, couplings and conveyor components.

AJF ELECTRICAL DISTRIBUTORSAJF Electrical Distributors takes pride in being South Australia’s electrical, data and communication experts. Established more than four decades ago, AJF specialises in high-quality products with excellent service to assist industry. The team at AJF Electrical Distributors is trained in all its product range to ensure customers obtain the best advice. Staff are able to advise on everything from hazardous area applications and lightning protection to the use of large Busway systems, data racking projects, workplace safety and portable printing.

OU

R S

ER

VIC

ESABOUT US

REPAIRS & MODIFICATIONSThe expert team at Royce Cross Electric Motor Group can provide modifications to most electric motors and gearboxes. The service includes:

■ Removal of old fans for modern replacements■ Pulley and sprocket fitting to motor shafts■ Specialised shaft manufacturing to suit original motors■ Re-wiring and rewinding■ Upgrades to motor performance and winding temperature ratings■ Increasing IP ratings from IP55 to IP66 to most motors■ Various robust paint options available■ Cooling tower modification

MACHINING & CUSTOMISATIONManufacturing a specific component is among the specialty services offered by Royce Cross Group. The vast array of workshop services and machining includes:

■ Customisation of sprockets and pulleys■ Manufacturing shafts, rollers and sprockets■ Repairs to existing shafts and rollers■ Reverse engineering

RE

PAIR

S, M

OD

IFIC

ATIO

NS

& M

AC

HIN

ING



ROYCECROSSGROUP

4

POWER & AUTOMATION■ VARIABLE-SPEED DRIVESRoyce Cross Group’s large range of variable-speed drive brands, including ABB, Toshiba, Teco, Delta, Baldor, Invertek and KB Penta, means we can offer the correct unit for purpose at the best price. Royce Cross Group also can assist with set-up. The models boast high torque, compact sizing and built-in EMI filters. Low and high-torque applications are covered by our range of variable-speed drives. The range comprises:

■ 0.37kW to 2.2kW 240-volt input■ 0.37kW to 500kW 415-volt input■ 480-volt SWER line models■ DC inverters

■ General-purpose drives■ Medium-voltage AC drives■ DC drives■ Micro drives■ Machinery drives■ Industrial drives■ HVAC and pump drives

Plug-and-play motor control convenience is achieved with ABB’s motor drives. The general purpose drives offer built-in features, simplifying drive selection, installation and use.Intuitive user interfaces provide quick drive set-up and commissioning. The drives adjust a motor’s rotating speed and torque. The range includes:

PO

WE

R &

AU

TOM

AT

ION

Competitive pricing is the main attraction of the Teco range of quality variable-speed drives. Teco’s IP66 washdown drive is hard to beat on price and reliability. The range includes:

■ General-purpose drives■ HVAC and pump drives■ Compact OEM drives■ Medium voltage ■ Advance vector control

VAR

IAB

LE-S

PE

ED

DR

IVE

S




5

■ Limit switches, sensors and timers■ Control buttons, switches and pilot lights■ Emergency stop stations■ Custom-designed control stations and packages■ Auto transformer starters■ Contactors and overloads■ Circuit breakers■ Forward/reversing switches■ Electronic motor protectors■ Soft starters and direct on-line starters■ Star/Delta starters

■ MOTOR STARTERS, PROTECTION & SWITCH GEAR

■ MOTION CONTROLThe vast range of motion and machine control solutions covers such industrial applications as labelling, packaging, bottling, pick and place, laser cutting/trimming, stacking, cut-to-length, flying shear, web feeders and high-speed rotary wrappers. The ABB range of products stocked by Royce Cross Group assists manufacturers reduce energy consumption, increase equipment uptime, minimise maintenance and increase productivity. The range comprises:

Flexible and reliable performance combine with quality in the vast range of motor starters and protection products. Key in Royce Cross Group’s product lines are the ABB motor starters and protection items, which comprise:

■ Single and three-phase motion control drives■ Servo motors■ Inverter and vector drives■ Multi-axis motion controllers■ Auto transformer starters■ Operator panels ■ Single and multi-axis controls■ Digital and analog■ PCI format or stand-alone units with USB and serial interfaces■ Program via Baldor’s MintMT® (multi-tasking), embedded C or Active X® ■ Technologies, Device Net, ProfisbusDP, CANopen and ethernet

MO

TOR

STA

RT

ER

SM

OTI

ON

CO

NTR

OL



ROYCECROSSGROUP

6

“On-the-go” portable label printers to identify and label on demand are the perfect tool for myriad industries, including electrical contractors, safety officers, warehouse managers and lab assistants. The range of Brady’s light-weight portable printers, which can be used anywhere for multiple purposes, include:

■ SPILL CONTAINMENTSpill control products to help contain and clean spills quickly in the event of an emergency and reduce the number of people exposed to the hazard are among Brady’s extensive range. The products assist to contain spills and reduce harm to the environment. The range includes:

■ BMP21 printer - voice/data communications, electrical, general industrial■ BMP21-LAB - laboratory label printer for quick, accurate labelling■ BMP21-PLUS - tough unit with automatic formatting■ BMP41 - data/communication and electrical needs■ BMP51 - large display screen, easy-to-use label design applications■ BMP53 - compact and versatile with built-in Bluetooth® for technology for wireless printing■ BMP61 - labelling of cables, wire and other components■ BMP71 - prints cable and wire labels, health and safety signs and labels

Royce Cross Group supplies thousands of high-performance labels designed for use with Brady’s benchtop and portable printers. The labels can be used for a variety of applications across many industries. The range includes:

■ Wire and cable identification■ Facility safety■ Voice and data communication identification■ Laboratory identification■ Floor labels■ Indoor/outdoor labels

■ Absorbent spill kits■ Spill pallets, decks and berms■ Spill control and containment■ Floor labels■ Indoor/outdoor labels

IDENTIFICATION & SAFETY■ PRINTERS

■ LABELS

ID &

SA

FET

YP

RIN

TER

S, LA

BE

LS &

SP

ILL CO

NTA

INM

EN

T




7

■ LOCKOUT TAGOUT

■ SAFETYCreating a safe workplace is instrumental in the vast array of safety and security products carried by Royce Cross Group. The Brady products cover the gamut of safety and security needs, including:

■ Safety labels and tags■ Safety posters and signs■ Hard hat and safety labels■ Personal protection items■ Workplace mats■ Security seals, safety tags and signs

■ FIRST-AIDComply with legislation requirements with Brady’s large range of first-aid kits and products, ranging from wall mount or portable kits to sports and high-risk survival kits. There’s also a first-aid range for specific industries, such as food and industrial manufacturing. Among the products are:

■ Safety labels, tags, posters and signs■ Hard hat and safety labels■ Personal protection items■ Workplace mats■ Security seals, safety tags and signs■ First-aid kits ■ First-aid room and rescue equipment

■ Padlocks■ Lockout stations and devices■ Hard hat and safety labels■ Lockout tags and devices

ID &

SA

FET

Y

Every year countless workers are killed or injured due to the unintentional release of hazardous energy sources. Numerous incidents could have been prevented with a clearly documented lockout tagout procedure. AJF Electrical Distributors offers a solution with Brady’s lockout tagout products. The broad range of durable, easy-to-use lockout devices cover most mechanical and electrical applications.Communicate safety and lockout information at the point of need with Brady’s wide selection of OSHA-compliant lockout/tagout tags. The lockout tags come in a variety of materials to suit various application needs. The lockout/tagout range includes:

LOC

KO

UT

TAG

OU

T, S

AFE

TY &

FIR

ST-

AID

The global coronavirus pandemic highlights the importance of workplace hygiene. Royce Cross Group carries an extensive range of products, from hand sanitiser to signs and floor markings, to promote hygiene and safe work practices, including:

■ Hand sanitiser■ Floor markers■ Signs, posters and labels■ Personal protection items

■ WORKPLACE HYGIENE



ROYCECROSSGROUP

8

PRE-INSULATED TERMINALS

■ Bullet terminals■ Cord end terminals ■ Cassette and double boot lace ferrules■ Closed end, parallel and pin connectors■ Flag terminals■ Flanged fork terminals■ Flat blade terminals■ Fork terminals■ Fully-insulated quick connectors

■ Hook blade terminals■ Inline joiners■ Insulating covers■ Male tabs■ Nylon-insulated butt connectors■ Part-insulated quick connectors ■ Piggy back connectors ■ Ring terminals

Red, green, yellow, blue, black, grey, white and clear are among the many colour options in the vast array of pre-insulated terminals stocked by AJF Electrical Distributors. The range includes:

LUGSThe vast range of lugs are made from high conductivity annealed copper. The array of sizes and types of quality lugs stocked by AJF Electrical Distributors includes:

■ Bell mouth■ Bolted■ Circuit breaker■ Copper sleeves■ Crimp■ Double grip■ Long barrel■ Palm long barrel

PR

E-IN

SU

LAT

ED

TE

RM

INA

LSLU

GS

/VAR

IATOR

SSPEED VARIATORS

FEATURES:■ Wide speed range■ High torque at low speed■ Strength■ Reliability■ Resistance to strong strains and harsh environments

Performance is the key attribute of the Var-Spe speed variators. Suitable for many types of applications and sectors, the Var-Spe variators can be used in a variety of applications and industries, including conveyors.




9

ALLOY ELECTRIC MOTORS ■ SINGLE-PHASE INDUCTION MOTORSGeneral-purpose, single-phase electric motors are available as totally enclosed fan cooled or open drip-proof. They can be used in such applications as compressors, machine tools, pumps, fans, conveyors, material handling and many others.

FEATURES:■ IP55 enclosure; IP upgrade available■ Foot or flange mount (B5, B14A, B14B)■ Multiple feet arrangements available■ Aluminium frame, end shields and base■ Metric frame (IEC)

FEATURES:■ Foot mount and foot/flange mount (B5, B14A, B14B)■ Multiple mounting arrangements available■ Aluminium frame, end shields and base■ Metric frame (IEC)■ IP55 enclosure■ IP upgrade available

MY RANGE - PSC

ML RANGE - CAP-START CAP-RUN

BARBECUE SPIT MOTORS

kW 2800rpm 1400rpm

0.06 -

0.09

0.12

0.18

0.25

0.37

0.55

0.75

1.1

1.5

2.2

3

Watts rpm torque

25 3 8Nm

60 3 10Nm

kW 2800rpm 1400rpm 900rpm

0.18 - -

0.25 -

0.37

0.55 -

0.75

1.1 -

2.2 -

3 -

4 - -

ALL

OY

ELE

CT

RIC

MO

TOR

SS

ING

LE-P

HA

SE

IND

UC

TIO

N

FEATURES:■ Terminal boxes included■ Insulation class B, IP20 continuous duty■ Coupling option to suit 3/4" bar



ROYCECROSSGROUP

10

RO

LLED

ST

EE

L MO

TOR

SS

ING

LE P

HA

SE

ROLLED STEEL■ IMPERIAL FRAME SINGLE-PHASE

■ 37kW to 0.55kW capacitor start only■ 0.75kW to 1.5kW capacitor start, capacitor run■ B56, NEMA and chicken feeder flanges available■ Options include lead with plug and on/off switch■ Rolled steel

FEATURES:■ B56 and NEMA flanges available■ Optional lead and plug ■ 0.25kW to 0.55kW split phase■ 0.75kW capacitor-start, capacitor-run■ Rolled-steel body and alloy end shields■ On/off switch and plug-in lead for cement mixer option

FEATURES:■ Foot mount■ Lead and plug optional■ Rolled steel body and cast-iron end shields■ Heavy duty design

kW 1400rpm 900rpm 1400rpm

(resilient mount)

0.25 - -

0.37 - -

0.55 -

0.75 -

kW 1400rpm

1.5

2.2

B56 GENERAL PURPOSE TEFC WITH 5/8″ SHAFT

B100S HEAVY DUTY TEFC WITH 24MM SHAFT

B56 GENERAL PURPOSE ODP WITH 5/8″ SHAFT

NOTE: Available as cement mixer electric motor.

kW 2800rpm 1400rpm 1400rpm 900rpm

(65mm long shaft)

0.37 -

0.55 -

0.75 -

1.1 - -

1.5 - -




11

BR

ICK

SA

W M

OTO

RS

CO

MP

RE

SS

OR

MO

TOR

S

FEATURES:■ 2800rpm■ Capacitor start, capacitor run■ ¾″ shaft■ DPFC and ODP■ Pressure switches in stock■ Supplied with lead and plug■ RCG motors boast 1.15 service factor

FEATURES:■ Includes oil burner flange■ 0.37kW to 0.55kW cap start only■ 0.75kW to 1.1kW cap start, cap run■ Shaft option ½″ or 5/8″■ Also available in three-phase■ Totally enclosed fan cooled

kW RCG CG 1.65

2 -

2.2

kW 1400rpm 0.37

0.55

0.72

1.1

FEATURES:■ 1.7kW two-pole totally enclosed fan cooled motor■ Capacitor start/capacitor run (CS/CR)■ ¾″ shaft■ Thermal overload protection■ Switch and lead fitted on left or right-hand side looking at the shaft■ Blade on shaft, flat saw motors also available

kW Switch RHS Switch LHS 1.7

Designed specifically for bricksaws, the bricksaw motor includes an on/off switch.

BRICKSAW MOTORS

CHICKEN FEEDER MOTORS

COMPRESSOR DUTY MOTORS

FEATURES:■ B56 frame totally enclosed fan-cooled motor■ ⅝″ shaft diameter■ Available in 370, 550, 750 and 1100 watts■ Boasts forward-off-reverse switch■ Fitted with 10-amp lead with male plug and short 10-amp lead with female socket

DRAIN CLEANER MOTORS



ROYCECROSSGROUP

12

AIR

-MO

VE

ME

NT

MO

TOR

SS

ING

LE P

HA

SE

AIR-MOVEMENT MOTORS■ SINGLE-PHASE EVAPORATIVE

FEATURES:■ 4/6-pole dual winding with centrifugal switch■ Supplied with lead■ B56 frame■ 5/8″ shaft motors with tapped windings are PSC■ Capacitor run

kW 3-speed 2-speed dual winding speed variable speed

0.37

0.60

0.75

1.1

1.5

RCT BELT-DRIVEN RESILIENT MOUNT

The diverse RCG air movement and general purpose motors deliver multiple applications for refrigeration, reverse cycle, evaporative and ducted heating solutions.

FEATURES:■ Thermal fuse■ Distinctive snap and fit four-in-one design■ 5/16″ shaft

RCT52 FRIDGEMASTER SERIES

watts pole cap supplied reversible shaft

13 4 single

20 4 single

40 4 double

* NOTE: Can be mechanically reversed by removing the rotor then re-assembling in the opposite direction.

FEATURES:■ Dynamically balanced rotors■ Permanent split-capacitor design■ ½″ shaft

RCT85 SINGLE-SHAFT BLOWER MOTOR

watts pole cap supplied reversible speed

250 4 * yes multi

290 4 ✗ * yes multi




425 4 * yes multi

600 4 * yes multi

750 4 * yes multi




13

AIR

-MO

VE

ME

NT

MO

TOR

S B

LOW

ER

& C

ON

DE

NS

ER

MO

TOR

S

FEATURES:■ Permanent split capacitor design on 1hp motors■ Low noise bearings■ Auto reset thermal overload on 1hp motors■ ½″ shaft

watts pole cap supplied reversible speed

180 4 single

150 6 multi

250 6 single

300 6 * single

370 6 multi

425 4 * multi

550 4 multi

RCT85 SINGLE-SHAFT CONDENSOR MOTOR

watts pole reversible speed

180 4 single

250 6 single

370 6 single

550 6 single

FEATURES:■ Evaporative cooling motor■ Four brackets fixed to body for mounting■ Lug mounting■ Direct drive/fan on shaft application■ Auto reset thermal overload■ Interchangeable with other brands■ Three speed■ CE certified■ Capacitors supplied■ B56 frame with 1/2″ shaft■ 12-month warranty

ROCKET SHIP MOTORSReferred to as a rocket ship due to its physical appearance, this vertical-mount motor has four brackets fixed to the body for mounting and is made specifically for the Royce Cross Group for Australian conditions.

Part no Watts Amps Rpm Speed Cap size Rotation Reversible Volts

RCT90-6004S-ODP-RKT 600 5.4 1350/1120/750 Three 15uF CW No 240

RCT90-6004S-ODP-RKT 500 5.2 1350/1070/690 Three 10uF CW No 240

NOTE: This motor can be used for two units by changing the capacitor size: 10uF capacitor = 500 watts; 15uF capacitor = 600 watts.

NOTE: This motor can be mechanically reversed by removing the rotor then re-assembling in the opposite direction.



ROYCECROSSGROUP

14

AIR

-MO

VE

ME

NT

MO

TOR

SE

VAP

OR

ATIVE

FAN

MO

TOR

S

FEATURES:■ Dynamically balanced rotors■ Permanent split-capacitor design■ ½″ shaft■ Four and six-pole■ Interchangeable with other brands■ Resilient-mount cradle

watts pole cap reversible speed ODP TE

supplied

80 4 multi

100 4 multi

130 4 multi

250 4 multi

290 4 ✗ multi

315 4 multi

350 4 ✗ multi

365 4 ✗ multi

425 4 ✗ multi

600 4 multi

750 4 multi

40 6 multi

200 6 multi

RCT85 DOUBLE-SHAFT BLOWER MOTOR

FEATURES: ■ Low noise and long-life bearings■ Designed to international standards■ Permanent split-capacitor design■ Interchangeable with other brands■ Auto-reset thermal overload on single and three-phase motors■ Reversible by relocating rotor■ Dynamically balanced rotors■ CE certified■ F class insulation

EVAPORATIVE DIRECT DRIVE FAN MOTORS BAND MOUNT SHAFT-UP WITH EXTENDED-THROUGH BOLTS

watts pole cap supplied speed

600 4 ✗ variable

750 4 ✗ variable

1000 4 ✗ variable

FEATURES: ■ Low-noise and long-life bearings■ Auto-reset thermal overload on single and three-phase motors■ Interchangeable with other brands■ Permanent split-capacitor design■ Reversible by relocating rotor

BAND-MOUNT SHAFT-DOWN VARIABLE SPEED


425 4 multi

600 4 multi

750 4 multi

950 4 multi




15

AIR

MO

VE

ME

NT

MO

TOR

SFA

N M

OTO

RS

FEATURES: ■ Low noise andl ong-life bearings■ Designed to international standards■ Interchangeable with other brands■ Used for heating and cooling applications■ CE certified■ Dynamically balanced rotors

RCT EXTENDED NON-DRIVING SHAFT & TACHO GROOVE IN REAR ENDSHIELD

FEATURES: ■ Low noise and long-life bearings■ Designed to international standards■ Auto reset thermal overload on single and three-phase motors, three-phase with 5/8″ shaft, single-phase with ¾″ shaft■ Interchangeable with other brands■ Permanent split-capacitor design for single-phase■ Six-pole■ CE certified■ Design suitable for Triac control available on request

RCT LARGE LUG-MOUNTED FAN MOTORS

watts pole phase speed

375 6 three single

400 6 single two

FEATURES: ■ Low noise and long-life bearings■ Designed to international standards■ Auto-reset thermal overload■ Interchangeable with other brands■ Permanent split-capacitor design■ Four-pole■ Dynamically balanced rotors■ CE certified■ Design suitable for Triac control■ Clockwise drive-end■ Resilient mount with plug

RCT SPECIAL FAN MOTORS

watts pole capacitor speed

425 4 single


250 4 ✗ variable

310 4 ✗ variable

315 4 variable

500 4 ✗ variable

600 4 ✗ variable

650 4 ✗ variable

750 4 ✗ variable



ROYCECROSSGROUP

16

CA

ST-IRO

N M

OTO

RS

THR

EE

PH

AS

E

FEATURES:■ 0.55kW to 550kW■ 2 to 8-pole■ Foot and foot/flange mounting available■ Multiple mounting arrangements available ■ Terminal box on top as standard■ IP66 protection■ Two-part epoxy paint■ Alloy or cast fan on request■ Class F insulation with class B temperature rise■ Other insulation class, including class H and other speeds available on request

RCG MINING MOTOR

CAST IRON ■ THREE-PHASE

FEATURES:■ 0.55kW to 550kW■ 2 to 8-pole■ Other speeds available on request■ Foot and foot/flange mounting available■ Multiple mounting arrangements available■ Terminal box on top as standard■ IP55 protection; IP56 and IP66 available on request■ Class F insulation with class B temperature rise■ Other insulation class available on request■ Thermisters are standard for frames D160 and larger■ Brake motors D80 to D315 available on request

RCG INDUSTRIAL MOTOR

FEATURES:■ 0.55kW to 550kW (above 200kW is Maxe 3 mining motor)■ Foot and foot/flange mounting available■ Terminal on right-hand side from drive-end shaft■ 2 to 8-pole■ IP66 protection■ Class F insulation with class B temperature rise and class H available on request■ 50Hz, three-phase AC supply■ IE3 high-efficiency motors■ Service factor 1:15 at 40°C ambient

TECO MAXE 3 PREMIUM SEVERE DUTY




17

ALL

OY

& R

OLL

ED S

TEEL

THR

EE

PH

AS

E

FEATURES:■ Available in Exde, Exd, Exe, Extd (DIP), ExnA■ 0.18kW to 560kW, D71 to D355 frames■ Foot and foot/flange mounting available■ Terminal box on the right-hand side looking at the drive-end shaft■ 2 to 8-pole■ IECEx certified■ Class F and class H insulation available■ Low temperature rise for substantial thermal reserve■ IP55, IP66 and hazardous brake motors also available

,

HAZARDOUS AREA MOTORS

ALLOY & ROLLED STEEL ■ THREE-PHASE

FEATURES:■ 0.06kW to 15kW■ 2 to 8-pole■ S1 duty, class F insulation with class B temperature rise■ IP55 protection; 21 upgrade available■ Multiple feet locations and mounting arrangements■ High output versions for reduced frame size and weight

FEATURES:■ Imperial B56 frame■ Class F insulation, IP55■ Various flanges available■ Totaly enclosed fan cooled

kW 2800rpm 1400rpm 900rpm 0.37

0.55

0.72

1.1

RCG ALLOY THREE-PHASE

B56 GENERAL PURPOSE TEFC WITH 5/8″ SHAFT

FEATURES:■ 0.09kW to 90kW■ 56 to 250 frame sizes■ High output versions for reduced frame size and weight■ Wide voltage range■ Suitable for DOL and VSD applications ■ Other brands available

ABB ALLOY INDUSTRIAL MOTORS



ROYCECROSSGROUP

18

ALLO

Y M

OTO

RS

BR

AK

E &

IMP

ER

IAL M

OTO

RS

ALLOY■ THREE-PHASE

FEATURES:■ 0.06kW to 15kW■ 2 to 8-pole■ S1 duty, IP55 protection■ Class F insulation with class B temperature rise■ Foot and foot/flange■ IEC frame 63 to 132 also available■ Flanges NEMA, B5, B14A and B14B available■ Imperial brake motors available

FEATURES:■ 0.25kW to 7.5kW■ 2 to 8-pole■ 80 to 132M frame■ IP55 protection■ Foot and foot/flange■ Multiple feet locations■ Multiple mounting arrangements available■ Class F with class B temperature rise■ 240-volt/415-volt Delta/Star for 3kW or less■ 415-volt/720-volt Delta/Star for 4kW and above■ Imperial brake motors available

FEATURES:■ 0.12kW to 15kW■ 2 to 6-pole■ 63 to 160L frame■ Foot and foot/flange■ Multiple feet locations■ Multiple mounting arrangements available■ Class F with class B temperature rise■ 240-volt/415-volt Delta/Star up to 100L frame■ 415-volt/720-volt Delta/Star 112M & 132M frame■ Cast iron brake motors to 315 frame available

GD SERIES NEMA/IMPERIAL FRAME

CG ALLOY AC BRAKE MOTOR WITH DC OR AC BRAKE

RCG SERIES ALLOY AC MOTOR WITH AC OR DC BRAKE

NOTE: Not all sizes available on all speedsDC brake supplied with 240-volt AC up to 100L frame, rectified to 110-volt DC; 415-volt AC from 112M to 132M rectified to 190-volt DC frame; some variance with 6 and 8-pole.

NOTE: Not all sizes available on all speeds; some variance with 6-pole and 8-pole.




19

TH

RE

E P

HA

SE

MO

TOR

SW

AS

HD

OW

N &

DC

FEATURES:■ Three phase■ 0.37kW to 15kW■ Totally enclosed fan cooled and non-ventilated enclosures■ Labrynth seals■ Standard and super-E efficiency■ IEC and NEMA frame available

DC MOTORSFEATURES:■ SCR-rated 12, 24, 36, 48, 90 or 180-volt■ 0.02kW to 2.2kW■ Totally enclosed non-ventilated and fan-cooled enclosures■ C-face with base■ Tacho adaptable■ Explosion-proof ¼hp to 1.5hp on request■ Integral tacho ¼hp to 5hp on request

WASHDOWN DUTY

NORD ANTI-CORROSIVE WASHDOWN DUTY MOTORS

DC MOTORS & GEARED MOTORS

FEATURES:■ Corrosion resistant and non flaking■ Lighter than stainless steel■ Available in helical gear units, two-stage bevel gear unit, SMI worm unit, three-phase motor, motor starter and frequency inverter■ Ideal for extreme weather conditions

FEATURES:■ Permanent magnet motor■ Continuous duty■ Totally enclosed non-ventilated■ IP54 protection■ Hardened steel worm■ Reversible■ Suitable for horizontal or vertical mounting

DC GEARED MOTORS

AC ALL STAINLESS WASHDOWN DUTY MOTORS



ROYCECROSSGROUP

20

GE

AR

MO

TOR

SR

ED

UC

ER

S &

VAR

IATOR

S

GEAR MOTORS ■ REDUCERS AND VARIATORSRoyce Cross Group is a leading supplier of drive and automation technology. It stocks an extensive range of gear motor products from such leading brands as Transtecno, Nord, Motovario, Siti, STM, SEW, Bonfiglioli, Pujol, Rossi and RCG. Products include:

■ 0.25kW to 22kW ■ Robust one-piece high-strength cast-iron housings ■ High degree of modularity ■ Motor connection by flexibility coupling ■ Quality expoxy RAL7016 0.10mm to 0.15mm thickness ■ Lubrication with synthetic oil ■ Up to 3500Nm of torque NOTE: Industrial helical gear unit max 250,000Nm, 4000kW

■ 0.06kW to 4kW (7.5kW for worm gearboxes)■ Ground-hardened helical gears■ Diecast aluminium housings and input flange■ Cast-iron feet and output flanges (inline units)■ Permanent synthetic oil, long-life lubricant■ High degree of modularity■ Up to 1000Nm of torque

■ ALLOY GEARBOX FEATURES:

■ CAST-IRON GEARBOX FEATURES:

■ Helical in-line gearboxes■ Helical bevel right-angle gearboxes■ Worm right-angle gearboxes ■ Worm double reduction gearboxes■ Single-stage helical (pre-stage) gearboxes■ Torque arm shaft-mount reducers■ Agricultural gearboxes■ Mechanical variators■ Varspe Hydrostatic drives (for high torque, explosion-proof and wash-down applications)




21

EN

CLO

SU

RE

SP

OW

DE

R C

OAT

ED

& S

TAIN

LES

S S

TEE

L

ENCLOSURES ■ POWDER-COATED METAL

■ STAINLESS STEEL

Made from continuous lengths of sheet steel, which is double folded at the front, Royce Cross Group’s enclosures boast a metal body thickness of 1.2mm. Each back panel is welded to the frame while the enclosures are dust and waterproof to IP66.Externally and internally protected with polyester epoxy resin, the enclosures have welded studs on the back panels for direct fixing to mounting plates or other accessories. Each unit has easily removable hinges, allowing a left or right-hand door opening of more than 120 degrees. Other features include foamed-in polyurethane gaskets and front rain gutters, mounting and gland plates and lock system. Testing reports are available on request. Accessories include: ■ Louvre plates ■ Insulated cable gland plates ■ Canopies ■ Cubicle suite joining sets ■ Reinforced joining parts ■ Wall-fixing brackets ■ Eye bolts

Boasting monoblock watertight AISI316 stainless steel and Scotch brite (AST)-type mechanical polish, Royce Cross Group’s enclosures include mounting and gland plates, stainless-steel nuts, screws, hinge pins and lock levers. They are suitable for corrosive and hygienic environments as well as being dust and waterproof resistant to IP66.

Part no. height x width x depth

ELIPMET2520/150 250mm x 100mm x 150mm ELIPMET3020/200 300mm x 200mm x 200mm

ELIPMET3030/200 300mm x 300mm x 200mm










Part no. height x width x depth

ELIPSS2020/150 200mm x 200mm x 150mm

ELIPSS2520/150 250mm x 200mm x 150mm

ELIPSS3020/200 300mm x 200mm x 200mm

ELIPSS3030/220 300mm x 300mm x 200mm

ELIPSS4030/250 400mm x 300mm x 250mm

ELIPSS4040/250 400mm x 400mm x 250mm

ELIPSS5040/250 500mm x 400mm x 250mm

ELIPSS5040/300 500mm x 400mm x 300mm

ELIPSS6040/250 600mm x 400mm x 250mm




ELIPSS8060/300 800mm x 600mm x 300mm

ELIPSS8080/300 800mm x 800mm x 300mm

ELIPSS1212/400 1200mm x 1200mm x 400mm

ELIPSS1010/400 1000mm x 1000mm x 400mm



ROYCECROSSGROUP

22

DA

TA &

CO

MM

UN

ICA

TIO

NR

AC

KS

, CO

NN

EC

TOR

S, FIB

RE

OP

TICS

DATA & COMMUNICATIONRoyce Cross Group is one of the largest stockists of structural cabling products for voice, data and fibre optic cabling in South Australia. Integrated fibre and copper solutions are available for such industries as:

■ Banking■ Broadcast■ Construction■ Data centres■ Defence■ Education

■ Industrial■ Mining■ Oil and gas■ Security■ Telecommunications■ Utilities

■ FIBRE OPTIC CABLING

■ Distribution frames■ Fibre assemblies■ Fibre enclosures and racks■ Fibre optic cables ■ Fibre optic management and ducting■ Fibre termination and splicing ■ Harsh environment fibre assemblies■ MTP cabling systems - plug-and-play solutions■ Networking switches and media convertors■ Test and inspection

Solutions for internal and external cabling is guaranteed with Royce Cross Group’s fibre optic range. Among the many items in our vast product range are:

■ COPPER DATA CABLINGRoyce Cross Group offers full end-to-end Cat 5E, Cat 6 and Cat 6A solutions for copper data cabling systems. Our extensive product range includes:

■ Indoor and outdoor LAN cables■ Standard and miniature patch leads■ 10˝ and 19˝ patch panels■ Connectors and wall plates■ 10˝ wall enclosures and accessories■ 19˝ wall and free-standing racks■ Networking switches and media converters■ TerminatIon and testing tools■ Certifying and testing equipment




23

DA

TA R

AC

KS

UP

S, A

CC

ES

SO

RIE

S

■ 19˝ RACKS

■ RIELLO UPSEfficiency, resilience and power quality are features of the Riello UPS range, which aims to provide continuous energy. UPS provides consistent back-up power during inconsistent power issues. There are many UPS options available to meet all requirements. The Riello UPS product range includes:

■ 400VA to 800kVA UPS■ Off-line, line interactive and double conversion online UPS■ Tower and 19˝ mounted racks■ Monitoring and communication software

■ Audio racks■ B and C class SCEC-endorsed racks■ Channel racks■ Data centre racks■ Outdoor IP-rated racks■ RFI/EMI racks■ Server racks■ Soundproof racks■ Wall-mounted racks■ Rack accessories, such as:

■ Horizontal and vertical power panels■ Intelligent power distribution panels■ Integrated KVM consoles and LED monitors

■ ELECTRICAL ACCESSORIESRoyce Cross Group has all electrical needs covered with its vast range of electrical accessories, including:

■ Combination switches and sockets■ Wall-mount switches and sockets■ Extension sockets■ Three-phase straight or angled plugs■ Isolators■ Forward/reverse switches■ Tools■ Cable rodders■ Nylon, natural, ultra-violet and colour cable ties

As a complete cabling system supplier, Royce Cross Group offers an extensive range of 19" racks suitable for many industries. Australian-made and imported products from such brands as AFL Australia, Amdex, Argent, Global and Rackworld are sold by Royce Cross Group. Our product range includes:



ROYCECROSSGROUP

24

CH

AIN

CHAINAnti-corrosive, lube-free, stainless steel, special attachment and conveyor chains are among the vast range and grades available at C&A Chains and Accessories.C&A also stocks the vast top-quality Tsubaki chain. Chains are available in sizes ranging from ASA 25 or 05B to ASA200 or 32B in single, double or multiple strands.C&A provides a custom-made service for customers, manufacturing single or multiple runs to precise tolerances and exact dimensions. The chain range includes:

■ AGRITUFF ■ Developed by Tsubaki specifically for the agricultural industry ■ Boasts solid rollers for longer-wear life in harsh operating conditions ■ Extra heat treatment of pins results in longer chain life ■ Features quad riveted pins for side plate security

■ INDUSTRIAL ■ The Premium G7 Series has solid bushes with lube grooves for increased life ■ The chain’s metal has been shot peened to reduce stress in parts ■ Ring-coin process reduces the chance of cracking of side plates and increases chain strength

■ HT & SUPER SERIES ■ Boasts the same features as the industrial chain range ■ The chain’s heavier side plates provide increased strength ■ Tensile strength up to 40 per cent more than standard chains

■ NEPTUNE ■ Corrosion-resistant chain for outdoor and wet environments ■ Steel construction for long life ■ All parts individually impregnated ■ Ideal for use where stainless-steel chain is not robust enough

■ LAMBDA ■ Lube-free for life, making it cleaner and easier to maintain ■ Lasts up to seven times longer than traditional chains ■ All impregnanted sintend bushes and special coated pins for long trouble-free life

■ BEVEDOLPHIN ■ Tsubaki’s plastic-top chain ■ Special double-layer D-type plastic pins ■ Wear resistance in contact with water

■ CONVEYOR CHAINS ■ Includes double-pitch chains, hollow-pin types, standard and large rollers ■ Bush chain ■ BS and metric conveyor chains

CH

AIN

GR

AD

ES




25

SP

RO

CK

ET

S G

EA

RS

& R

AK

CS

SPROCKETS C&A Chains and Accessories’ range of sprockets are made with high-quality steel and boast induction-hardened teeth for longer wear. The range covers 1/4″ pitch ASA 25 to 2½ pitch ASA 200. Components can be customised to suit any application.

GEARS & RACKS■ GEARS ■ Made from cast-iron and K1045 steel ■ Custom made to order ■ 24dp to 3dp, module 1 to module 8 ■ Up to 1.6m diameter ■ Stainless steel, plastic, bronze, geartex, aluminium and tool steel - special manufacture to order

Used to convert rotating movement into linear motion, our range of racks boast strong teeth. They also offer high rigidity.

■ RACKS

■ SPUR GEARSThe range of imperial and metric spur gears are manufactured from steel material. They can be customised to suit specific applications.



ROYCECROSSGROUP

26

BE

LTS

& P

ULLE

YS

CO

UP

LING

S

Used in many applications, the vast range of belts available from C&A Chains and Accessories includes timing belts, V belts, conveyor and ribbed belts. The belts compliment our range of pulleys. Used in such applications as motion or power transmission in machines, the top-quality belt varieties include:

Chains & Accessories stocks a large range of cast-iron and aluminium pulleys. A, B, SPA and SPB pulleys in single, double and triple rows are among the many types on offer. They are available in cast-iron and aluminium. Machining to fit locking elements and bore/keyway options is available. The range comprises:

■ PULLEYS

■ BELTS

■ HDT■ Banded■ Poly■ Timing■ A, B and C section V belts

■ Chain■ Disc■ Spider■ Cone ring■ Taper lock■ Torque limited■ Tyre■ Gear

Reliable, quality couplings are part of Royce Cross Group’s power transmission components. The large range includes jaw couplings (HRC), chain couplings, cone-ring couplings and gear couplings. Among the types available are:

■ COUPLINGS

■ 1A, 1B, 2A, 2B and stepped A■ SPA, SPB, SPC and SPZ■ Tapered and standard bore■ Taper lock■ Flat belt■ Timing belt

■ Agricultural

■ Two and four-stroke go-kart

Clutches for use to limit pulleys or sprockets being engaged at idle speed are carried by Royce Cross Group. Our extensive range of centrifugal clutches include:

■ CLUTCHES




27

CO

NV

EY

OR

CO

MP

ON

EN

TS

STA

ND

AR

D M

AC

HIN

E E

LEM

EN

TS

CONVEYOR COMPONENTS C&A Chains & Accessories can supply conveyor systems to get products moving and speed the flow of goods. The range of components includes: ■ Castor frames ■ Mountings - bolt-hole or plate-mount ■ Wheels - rubber or nylon ■ Drive bands ■ Drive pulleys ■ Speed-up pulleys ■ Positive-drive high-torque pulley clips ■ Slave drive jump chain assemblies ■ End guards and stops ■ Guide rails

C&A Chains & Accessories are agents for Siegling conveyor belts. Our range of conveyor equipment includes:

■ GRAVITY CONVEYORS ■ Basic frames - galvanised, painted or stainless-steel ■ Rollers - black steel, galvanised, PVC or polyprop ■ Skate wheels - plastic or steel ■ Support stands - height adjustable in five sizes

■ ROLLER CONVEYORS ■ Used for food, packaging, beverage, warehouses and factories ■ Can grow as company changes or diversifies ■ Straight or curved sections, gates and junctions ■ Ease of installation ■ Bolted permanent connections or hook-on for easy re-location

■ MINI BELT CONVEYORS ■ Ideal for small parts conveying and light applications ■ Bolt-on feet and side rails available

CABLE CARRIERSLoad capacity, durability and longevity are among considerations in choosing the correct cable carrier for each application. Tsubaki’s Kabelschlepp cable carriers are available in steel, high-grade stainless steel and plastic with aluminium stays in standard sizes or tailor-made to individual requirements in millimetre units. Steel, plastic and hybrid and open and closed designs are among the options for Kabelschlepp. The vast range of products include: ■ Hybrid cable carriers with variable chain width ■ Covered solid plastic and hybrid cable carriers ■ Steel cable carriers ■ Covered steel cable carriers ■ Ready-to-assemble cable carrier systems



ROYCECROSSGROUP

28

DU

CTW

AY RA

CE

WAY, FU

SE

GE

AR

■ Stockings■ Rollers and guides■ Rodding systems■ Winches

■ Lubricants■ Rollers■ Jacks■ Swivels

The vast range of cable installation products available through AJF Electrical Distributors includes:

A diverse range of Australian-made earth and neutral links is stocked by AJF Electrical Distributors. We are a distributor for NEtec, which specialises in numbered tunnels. The product range includes:

■ 100 to 500-amp covered links■ Neutral and earth bars■ Insulating feet

■ Screws and bolt clamps■ Accessories

CABLE-LAYING PRODUCTS

COVERED & BARE LINKS

■ Cable entry and exits■ Reducers■ Tubing■ Drop-off kits and drop components■ Suspension and mounting kits

Mounting options is a feature of the fibre optic ducting raceway manufactured by Warren and Brown Technologies. WBT YellowDuct ducting raceway, which is a unique system for routing and protecting fibre optic cords between termination equipment, patch panels and splicing cabinets or frames, can be mounted from walls, ladder racks, unistrut, raised floor support brackets and on floors. The products include:

DUCTING RACEWAY

■ Conduit, cable, beam and purlin clips■ Stud wall grommets■ Data supports■ Ceiling and acoustic applications

Fixing equipment, from basic purlin clips to the latest speed links, is a vast and constantly growing range of products from Caddy. Boasting speedy installation time and competitive prices, the Caddy line includes:

■ Two-amp to 800-amp BS88 fuses■ Fuse holders■ Cylinder fuses

A wide range of circuit protection devices is always in stock at Royce Cross Group. As a distributor for Eaton’s Cooper Bussmann range, there is a product to suit all industrial and general applications. The range includes:

ELECTRICAL FIXINGS, FASTENERS & SUPPORTS

FUSE GEAR

CA

BLE

-LAYIN

G &

LINK

S




29

Protect your assets from the harmful effects of a direct lightning strike. Lightning can cause major problems to power, data and telecommunication equipment and people. AJF Electrical Distributors offers a range of lightning protection systems from Australian company Lightning Protection Industries to meet specific requirements. LPI offers three types of direct strike protection systems, which include the full package of air terminals and accessories:

■ Stormaster ESE range of terminals ■ Conventional lightning protection system ■ Guardian System 5 provides a purpose-designed package for direct lightning protection

LIGHTNING PROTECTION

Power surges and spikes cause millions of dollars in damage. It is a common cause of electronic equipment failure, performance disruption and unscheduled system downtime. AJF Electrical Distributors carries Australian-designed products by Lightning Protection Industries. The range includes:

■ Power surge and transient protection■ Communications and data protection■ Earthing■ Powerlines

LPI® provides an extensive range of earthing products for the installation of a low-impedance earthing system. Whether installing a dedicated lightning earth or a facility earth grid, it is essential to ensure personnel safety and provide an effective earth to limit disruptions to services. LPI® Exoweld exothermic welding process is a safe and efficent way to provide a permanent connection between conductors. LPI products carried by AJF Electrical Distributors include:

■ Copper-bonded & stainless-steel earth rods ■ Copper & stainless-steel earth braids ■ Clamps & tapes ■ Pre-engineered ground grids and meshes ■ Chemical earth rods ■ Earthing accessories

■ EARTHING & GROUNDING

■ SURGE & SPIKE PROTECTIONLI

GH

TN

ING

PR

OT

EC

TIO

NE

AR

THIN

G, G

RO

UN

DIN

G &

SU

RG

E P

RO

TEC

TIO

N



ROYCECROSSGROUP

30

HA

ZA

RD

OU

S A

RE

A E

QU

IPE

MN

TLIG

HTIN

G, E

NC

LOS

UR

ES

HAZARDOUS AREA EQUIPMENTEnhancing safety and productivity in industrial and commercial environments is overcome with the many and varied products produced by Eaton Crouse-Hinds.

■ Cable glands ■ Conduit device boxes ■ Elbows, couplings, hubs, plugs, reducers and unions ■ Conduit seal, breathers and drains ■ Conduit bodies and outlet boxes ■ Visual and audible signalling devices

■ FITTINGS & GLANDS

■ LIGHTINGAdvanced industrial lighting solutions are covered by Eaton Crouse-Hinds’ range for hazardous areas. Hazardous area lighting offers superior illumination, flexibility and safety in the most demanding environments. The lighting products can be used in such applications as oil and gas exploration and production, petrochemical facilities, wastewater treatment plants, pulp and paper production, aluminium processing facilities, salt and potash mines, pharmaceutical and additives formulation and processing and many more. They can be used in locations with high temperatures, marine environments, combustible dust and other hazardous areas.

Time tested and innovative conduit industrial fittings, cable glands and cord connectors move power simply and safely in any electrical installation. The products on offer from Eaton Crouse-Hinds include:

■ ENCLOSURESHigh quality and robust are signature features of the Eaton Crouse-Hinds enclosures, junction boxes and custom electrical assemblies carried by Royce Cross Group. The enclosures have been designed and engineered to meet the requirements of the most demanding hazardous area, marine and heavy industrial environmental applications. The enclosures are made from quality materials to endure the harshest environmental conditions for project and installation requirements. They have the inherent benefits of a high degree of environmental ingress protection. The range includes:

■ Explosion-proof enclosures ■ Explosion-proof junction boxes ■ Explosion-proof equipment housing ■ Custom-built control panels




31

HE

AT

SH

RIN

KB

US

DU

CT

SY

STE

MS

■ Heat shrink reels ■ Heat shrink end caps, gloves, cable repair sleeves ■ Medium-wall, adhesive-lined heat shrink ■ Thick wall, adhesive-lined heat shrink ■ Tubing lengths

HEAT SHRINKThe areas in which heat shrink can be used vary widely. AJF Electrical Distributors stocks a range of tubing and moulds to suit all applications, providing protection against mechanical, environmental, chemical or electrical effects. Products include:

Vass Electrical Industries is Australia’s only comprehensive manufacturer and largest supplier of electrical busway/busduct systems and products. The range encompasses type-tested 80-amp to 12, 100-amp busway systems in feeder, bolt-on and plug-in configurations for AC and DC applications. Vass products include: S Series ■ Three-phase and neutral 80 to 700 amps ■ Single phase to 160 amps ■ Prefabricated ■ Plug-in power, take-off boxes H Series ■ Power distribution system for high-rise buildings (hospitals, mines and heavy industries) ■ Superior ‘sandwich’ type construction ■ Dangerous goods and spill control ■ Sizes ranging from 800 to 7000 amps

VASS BUSDUCT SYSTEMS

STANDARD MACHINE ELEMENTSC&A Chains & Accessories stocks the extensive Elesa+Ganter range of standard machine elements. The products include: ■ Operating elements ■ Clamping knobs ■ U-handles ■ Hinges ■ Indexing elements ■ Rotary controls ■ Fixed, revolving and fold-away handles ■ Toggle, power and hook clamps ■ Latches


ROYCECROSSGROUP

32

ROYCECROSSGROUP


08 8269 6400roycecrossgroup.com

roycecrossgroup.com 08 8269 4000

roycecrossgroup.com 08 8444 6700

● Busway systems● Communications ● Data● Electrical● Hazardous equipment

● Lightning protection● LV products● Printing systems● Racking ● UPS

● Air-movement motors● Capacitors● DC low-voltage motors● Electric motors● Electrical accessories

● Enclosures ● Geared motors● Mining motors● Rewind & repairs● Variable-speed drives

● Belts ● Chains● Conveyor items● Drives● Motors

● Gears● Racks● Pulleys● Sprockets● Accessories

Proudly South Australian

HEAD OFFICE:3 Cord Street, Dudley Park SA 5008

08 8269 4000 [email protected]

POSTAL: PO Box 239 Churchill Centre, Kilburn North SA 5084; OPEN: 8.00am - 5pm Monday - Friday


ROYCECROSSGROUP Cross...20 GEAR MOTORS Reducers and variators 21 ENCLOSURES Powder-coated metal and...

Documents

Transcript of ROYCECROSSGROUP Cross...20 GEAR MOTORS Reducers and variators 21 ENCLOSURES Powder-coated metal and...