ACUCXTM2M Router Quick Guide€¦ · ACUCXTM2M Router Quick Guide ACUCXTM2M Router Quick Guide
router guide en - smartordersystem.com
Transcript of router guide en - smartordersystem.com
1
SmartOrder Technology
Router Guide/Network Guide
Version 1.0
24 November 2016
Copyright © SmartOrder Technology Limited
All Rights Reserved
This document may not be reproduced or redistributed without the permission of the
copyright holder. It may not be posted on any website other than smartordersystem.com
2
Setup Your Network Router
Picture above shows the network router we recommended, Huawei it is the largest
telecommunications equipment manufacturer in the world. User can also choose their own brand of
router but bad router will cause system unstable. We suggest to use the router we recommend as we
have done a list of testing. Once your router is ready, you should be able to find the network address
of the router behind the device.
From the picture above we can see the network address for this router is 192.168.3.1, please note that
3
different router would have different network address. Please check before access to it.
Now connect the power source for the network router and also the internet cable. The following
picture shows the port available on the router. Normally, there is only one port that is connect to the
internet provider. In the example below would be the blue port. The other port would be to the
devices that you will need to connect.
When connected it should looks like below picture
4
If your restaurant will need to use many network printer, the 4 ports on the router is not enough for
you. You only need to add a network router. You can find the picture below for your referrence
Now you have connected your router correctly, you can now go to setup your router. We will use the
router WS550 we recommended as an example. Please open your internet browser and enter your
router IP address.
5
If you have got all your connection correct, you should see the image below
Click on "Let's Start", the system will automatically scan any available network to connect.
If you already got a internal network that is available your will not need to configure anymore, but
most user will need to configure their PPPoE setting in order to connect to the internet.
6
If internet is not available you will find the screen below
If you already got internet available you will find the screen blow
If you already successfully connected to the internet you will not need to configure PPPoE
7
Click "Next" if you didn't connect to the internet you should see the screen below. You internet
provider should have got a username and password for you. Please enter the username and password
Once entered, you will see the screen below. This is the Wifi name and the password you are about
to configure. Please keep your password securely.
8
Your router system login password would be the same as your Wifi password.
If you need to change your network IP setting you can login to the router.
If you have successfully enter the router page, you will see the screen below, click on "Home
Network"
9
Click "LAN Interface" and you will see the screen below
If user need to change their IP setting, they can find it at LAN Interface Setting
Once save, all the IP of the connected device will change and reboot is recommended.
10
You can also reserve your IP address for your POS or Printer device.
Support
For related enquiries, please contact our support team: