ROUGHNECK SUPPLYroughnecksupply.com/pdf/jet_wilton_flier.pdf2 Roughneck Supply | 2711 So. York St. |...

12
LIFTING SYST INDUS F U L L - L I N LIFTING SYSTEMS | HAND TOOLS | WAREHO STAND BEHIND YOUR WORK 550+ SERVICE CENTERS NATIONWIDE INDUSTRY LEADING WARRANTIES EXPE 2711 South York Street Muskogee, OK 74403 Phone: 918-686-6171 Fax: 918-781-1888 www.roughnecksupply.com Email: [email protected] October 2015 ROUGHNECK SUPPLY “Wholesale to the OilPatch”

Transcript of ROUGHNECK SUPPLYroughnecksupply.com/pdf/jet_wilton_flier.pdf2 Roughneck Supply | 2711 So. York St. |...

Page 1: ROUGHNECK SUPPLYroughnecksupply.com/pdf/jet_wilton_flier.pdf2 Roughneck Supply | 2711 So. York St. | Muskogee, OK 74403 | Ph. 918-686-6171 | Fax 918-781-1888 ... • Cast Iron Wheel

1LIFTING SYSTEMS

INduSTrIaLF U L L - L I N E C A T A L O G

LIFTING SYSTEMS | aIr TooLS | Shop TooLS

haNd TooLS | warEhouSE & dock | METaLworkING

STaNd bEhINd Your work™

550+ SErvIcE cENTErS NaTIoNwIdE INduSTrY LEadING warraNTIES ExpErT TEchNIcaL SErvIcE

2711 South York Street • Muskogee, OK 74403Phone: 918-686-6171 • Fax: 918-781-1888

www.roughnecksupply.comEmail: [email protected]

October 2015

ROUGHNECK SUPPLY

“Wholesale to the OilPatch”“Wholesale to the OilPatch”

Page 2: ROUGHNECK SUPPLYroughnecksupply.com/pdf/jet_wilton_flier.pdf2 Roughneck Supply | 2711 So. York St. | Muskogee, OK 74403 | Ph. 918-686-6171 | Fax 918-781-1888 ... • Cast Iron Wheel

Part # Descripton Price 111-106210 Jet 1/2ton 10’ Lift Hand Chain Hoist L-100-50-10 Series $195.84 111-105215 Jet 1/2ton 15’ Lift Hand Chain Hoist L-100-50-15 Series $217.60 111-101210 Jet 1ton 10’ Lift Hand Chain Hoist L-100-100-10 Series $223.04 111-101215 Jet 1ton 15’ Lift Hand Chain Hoist L-100-100-15 Series $266.56 111-101610 Jet 1.5ton 10’ Hand Chain Hoist L-100-150-10 Series $288.32 111-101615 Jet 1.5ton 15’ Lift Hand Chain Hoist L-100-150-15 Series $320.96 111-102210 Jet 2ton 10’ Lift Hand Chain Hoist L-100-200-10 Series $348.16 111-102215 Jet 2ton 15’ Lift Hand Chain Hoist L-100-200-15 Series $402.56 111-103210 Jet 3ton 10’ Lift Hand Chain Hoist L-100-300-10 Series $484.16 111-103215 Jet 3ton 15’ Lift Hand Chain Hoist L-100-300-15 Series $598.40

Part # Descripton Price 111-101910 Jet 1ton 10’ Lift Hand Chain Hoist S90-100-10 Series $136.00 111-101911 Jet 1ton 15’ Lift Hand Chain Hoist S90-100-15 Series $163.20 111-101920 Jet 1.5ton 10’ Lift Hand Chain Hoist S90-150-10 Series $174.08 111-101921 Jet 1.5ton 15’ Lift Hand Chain Hoist S90-150-15 Series $195.84

2 Roughneck Supply | 2711 So. York St. | Muskogee, OK 74403 | Ph. 918-686-6171 | Fax 918-781-1888 | www.roughnecksupply.com

L-100 Series Hand Chain Hoist Heavy Duty Applications

S90 Series Heavy Duty Applications

• Light Duty – Industrial• Dual Pawl Brake System• Alloy Steel Hooks

• Grade 80 Alloy Chain• All Steel Construction• Compact Design

• Patented Fused Brake System• Available in ¼” to 20 Ton Capacity• Comes in Standard Lift of: 10,15,20 & 30 ft.

• Alloy Steel Hooks• Grade 100 Alloy Chain• All Steel Constrution

ROUGHNECK SUPPLY “Wholesale to the OilPatch”

Page 3: ROUGHNECK SUPPLYroughnecksupply.com/pdf/jet_wilton_flier.pdf2 Roughneck Supply | 2711 So. York St. | Muskogee, OK 74403 | Ph. 918-686-6171 | Fax 918-781-1888 ... • Cast Iron Wheel

Part # Descripton Price 111-275050 Jet 3/4ton 5’ Lift Lever Hoist JLH-80-5 Series $223.04 111-275010 Jet 3/4ton 10’ Lift Lever Hoist JLH-80-10 Series $244.80 111-275015 Jet 3/4ton 15’ Lift Lever Hoist JLH-80-15 Series $266.56 111-210050 Jet 1ton 5’ Lift Lever Hoist JLH-100-5 Series $233.92 111-210010 Jet 1ton 10’ Lift Lever Hoist JLH-100-10 Series $250.24 111-210015 Jet 1ton 15’ Lift Lever Hoist JLH-100-15 Series $277.44 111-210020 Jet 1ton 20’ Lift Lever Hoist JLH-100-20 Series $299.20 111-215005 Jet 1.5ton 5’ Lift Lever Hoist JLH-160-5 Series $282.88 111-215010 Jet 1.5ton 10’ Lift Lever Hoist JLH-160-10 Series $299.20 111-215015 Jet 1.5ton 15’ Lift Lever Hoist JLH-160-15 Series $320.96 111-215020 Jet 1.5ton 20’ Lift Lever Hoist JLH-160-20 Series $359.04 111-225005 Jet 2.5ton 5’ Lift Lever Hoist JLH-250-5 Series $391.68 111-225010 Jet 2.5ton 10’ Lift Lever Hoist JLH-250-10 Series $418.88 111-225015 Jet 2.5ton 15’ Lift Lever Hoist JLH-250-15 Series $446.08 111-230005 Jet 3ton 5’ Lift Lever Hoist JLH-320-5 Series $440.64 111-230010 Jet 3ton 10’ Lift Lever Hoist JLH-320-10 Series $473.28 111-230015 Jet 3ton 15’ Lift Lever Hoist JLH-320-15 Series $511.36 111-230020 Jet 3ton 20’ Lift Lever Hoist JLH-320-20 Series $554.88

Part # Descripton Price 111-187606 Jet 3/4ton 5’ Lift Lever Hoist JLP-075A-5 Series $184.96 111-187607 Jet 3/4ton 10’ Lift Lever Hoist JLP-075A-10 Series $195.84 111-187608 Jet 3/4ton 15’ Lift Lever Hoist JLP-075A-10 Series $206.72

111-187610 Jet 1.5ton 5’ Lift Lever Hoist JLP-150A-5 Series $228.48 111-187611 Jet 1.5ton 10’ Lift Lever Hoist JLP-150A-10 Series $244.80 111-187612 Jet 1.5ton 15’ Lift Lever Hoist JLP-150A-15 Series $266.56

111-187614 Jet 3ton 5’ Lift Lever Hoist JLP-300A-5 Series $342.72 111-187615 Jet 3ton 10’ Lift Lever Hoist JLP-300A-10 Series $375.36 111-187616 Jet 3ton 15’ Lift Lever Hoist JLP-300A-15 Series $402.56

3Roughneck Supply | 2711 So. York St. | Muskogee, OK 74403 | Ph. 918-686-6171 | Fax 918-781-1888 | www.roughnecksupply.com

JLP Series Light Duty Applications

JLH Series Light Duty Applications

• Patented Fused Brake Design • All Steel Construction • Heat Treated Lead Plates• Alloy Steel Hooks • Caged Needle Bearing Design• Grade 100 Alloy Chain • HD Safety Latches

• Dual Pawl Brake System• Alloy Steel Hooks• Grade 80 Alloy Chain

• Available in ¼ to 6 Ton Capacity• Lifts from 5’ to 20’• Needle Bearing design

ROUGHNECK SUPPLY “Wholesale to the OilPatch”

Page 4: ROUGHNECK SUPPLYroughnecksupply.com/pdf/jet_wilton_flier.pdf2 Roughneck Supply | 2711 So. York St. | Muskogee, OK 74403 | Ph. 918-686-6171 | Fax 918-781-1888 ... • Cast Iron Wheel

Part # Descripton Price 111-505102 Jet 1/2” Impact Wrench R6 250’ Lbs Torque JAT-102 $76.16

Part # Descripton Price

111-505800 Jet R8 Needle Scaler 4,000 BPM JAT-800 $163.20

Part # Descripton Price 111-505401 Jet R6 Die Grinder 23,000 RPM JAT-401 $48.96

Part # Descripton Price 111-505301 Jet 3/8” Ratchet Wrench R6 50’ Lbs Torque JAT-301 $65.28

4 Roughneck Supply | 2711 So. York St. | Muskogee, OK 74403 | Ph. 918-686-6171 | Fax 918-781-1888 | www.roughnecksupply.com

• For Cleaning and Surface Preparations • Lever Lock• HD Heat Treated Barrels and Pistons • Use 3/8” Air Hose

• Lightweight Aluminum Construction • Variable-Speed Throttle w/Safety Lock• Rugged Ball-Bearing Design • Use 3/8” Air Hose

• Steel Ball Retainers • Hardened Steel Gears• Variable-Speed Control • Ball Bearing Construction Thoughout

• Pin Clutch Impact • 50-200ft/lbs Working Torque• Lightweight Aluminum Construction • Uses 3/8” Air Hose• One-Hand Forward/Reverse Button

ROUGHNECK SUPPLY “Wholesale to the OilPatch”

1/2” Drive Impact Wrench

3/4” Air Ratchet Wrench

Die Grinder

Needle Scaler

Page 5: ROUGHNECK SUPPLYroughnecksupply.com/pdf/jet_wilton_flier.pdf2 Roughneck Supply | 2711 So. York St. | Muskogee, OK 74403 | Ph. 918-686-6171 | Fax 918-781-1888 ... • Cast Iron Wheel

Part # Descripton Price

111-577101 Jet 6” #JBG-6A Bench Grinder 1 PH-2 HP-115 V-3,450 rpm, 1/2” Shaft diameter $152.32

111-577102 Jet 8” #JBG-8A Bench Grinder 1 PH-1 HP-115 V-3,450 rpm, 5/8” Shaft diameter $224.00

111-577103 Jet 10” #JBG-10A Bench Grinder 1 PH-1-1/2 HP-115 V-1,725 rpm, 1” Shaft diameter $435.20

Part # Descripton Price 111-655550 Jet 2ton JBJ-2 Bottle Jack $32.64 111-655558 Jet 8ton JBJ-8 Bottle Jack $59.84 111-655554 Jet 12ton JBJ-12 Bottle Jack $70.72 111-655556 Jet 20ton JBJ-20 Bottle Jack $97.92

Part # Descripton Price 111-151009 Jet 5000 lb Hyd. Hand Pallet Jack $331.52

Part # Descripton Price 111-140024 Jet 24”x36” Service Cart Metal $92.48

Part # Descripton Price 111-140091 Jet 20-1/2”x48” 5500lb Pallet Jack #PTX-2048 $344.32 111-140800 Jet 27”x48” Hand Pallet Jack 8,000 lb Cap. JTX-2748 $472.32

5Roughneck Supply | 2711 So. York St. | Muskogee, OK 74403 | Ph. 918-686-6171 | Fax 918-781-1888 | www.roughnecksupply.com

• Corrosion Resistant Pump Piston • For Lifting, Pushing, Bending and Pressing• Pump Handle Included • 2 Year Manufacturer’s Warranty

• Cast Iron Wheel Guards • Large Eye Sheilds • 2- 1 piece Tool Rest • Fine & Coarse Grinding Wheels

J Series • 180 degree Turning Radius • Powder Coat Finish

• 6-1/4” x 2-3/4” Steer Wheels• Welded All Steel Frame

JTX Series • 210 degree Turning Radius • 8” x 2” Steer Wheels • 2-1/2” Low Profile

PTX Series • 210 degree Turning Radius • 7” x 2” Steer wheels • 2-1/2” Low Profile • Chrome plated Pump Piston

• Capacity: 500 pounds• Smooth rolling 5 inch hard rubber wheels, two swivel and two fixed for

increased maneuverability• Reversible 31/2 inch deep metal trays, each have a capacity of 250 lbs.• Industrial all-steel design for strength and durability• Rolled steel edges reduce damage to property and personnel

ROUGHNECK SUPPLY “Wholesale to the OilPatch”

Bottle Jacks

Pallet Jacks

ServiceCart

Bench Grinder

Page 6: ROUGHNECK SUPPLYroughnecksupply.com/pdf/jet_wilton_flier.pdf2 Roughneck Supply | 2711 So. York St. | Muskogee, OK 74403 | Ph. 918-686-6171 | Fax 918-781-1888 ... • Cast Iron Wheel

6

Part No. Description Price111-10200 Wilton 3-1/2” C-0 Combo Pipe & Bench Vise Blu/Gry $538.56 111-10225 Wilton 4-1/2” C-1 Combo Pipe & Bench Vise Blu/Gry $777.92 111-10250 Wilton 5” C-2 Combo Pipe & Bench Vise Blu/Gry $1,006.40 111-10275 Wilton 6” C-3 Combo Pipe & Bench Vise Blu/Gry $1,479.68

Part No. Description Price111-10400 Wilton AW35 All Weather Vise Jaw 3-1/2” $565.76 111-10500 Wilton AW45 All Weather Vise Jaw 4-1/2” $799.68

Part No. Description Price111-10016 Wilton 4” Machinist Bench Vise 400S w/Swivel Base $516.80 111-10026 Wilton 5” Machinist Bench Vise 500S w/Swivel Base $810.56 111-10031 Wilton 6” Machinist Bench Vise 600S w/Swivel Base $1,077.12

Part No. Description Price111-10076 Wilton 4” Machinist Bench Vise 400N w/Stationary Base $489.60 111-10107 Wilton 6” 600N Machinist Vise Stationary Base $1,028.16 111-10116 Wilton 800N Machinists Vise 12” Jaw Opening $2,709.12

Roughneck Supply | 2711 So. York St. | Muskogee, OK 74403 | Ph. 918-686-6171 | Fax 918-781-1888 | www.roughnecksupply.com

ROUGHNECK SUPPLY “Wholesale to the OilPatch”

• Meets Federal Spec #GGG-V-410a, Type IV• Self Centering Pipe Jaws - Holds up to 6” Pipe• Deep Throat Style - Up to 50% Added Depth• Made in USA

• Self-centering nickel plated pipe jaws-hold up to 2-1/2” pipe safely and securely• Nickel plated jaw inserts-machine serrated, replaceable jaws assure a positive hold• Alloy steel slide bar for added strength and keyed for a precision fit• Large anvil work surface• Main and pipe jaws made from high strength steel and are fully replaceable• Swivel base has dual locking nuts• Made in USA

• Jaw Width: 6”• Jaw Opening: 10”

• Hardened Steel Jaw, Replaceable Inserts Are Machine Serrated For Safe, Sure Grip Under Maximum Torque• Extra Deep Throat - This Design Gives You More Working Room Where It Counts• Enclosed Design Keeps Lubrication In And Contaminants Out For Smooth Operation• Made in USA

• Throat Depth: 5-1/2”• 150 pounds

Combination Pipe & Bench Vise

All Weather Combination Pipe & Bench Vise

• Made in USA

Machinist Vise - Swivel

Machinist Vise - Stationary Base

Page 7: ROUGHNECK SUPPLYroughnecksupply.com/pdf/jet_wilton_flier.pdf2 Roughneck Supply | 2711 So. York St. | Muskogee, OK 74403 | Ph. 918-686-6171 | Fax 918-781-1888 ... • Cast Iron Wheel

7

Part No. Description Price111-63199 Wilton 4-1/2” 1745 Tradesman Vise w/Reversible Jaw Gry $348.16 111-63200 Wilton 5-1/2” 1755 Tradesman Vise w/Swivel Base & Rev.

Jaw Gray $424.32

111-63201 Wilton 6-1/2” 1765 Tradesman Vise w/Swivel Base & Rev. Jaw Gray $473.28

111-63202 Wilton 8” 1780A Tradesman Vise w/Reversible Jaw Gry $707.20

Part No. Description Price111-21300 Wilton 4” 744 HD Mechanics Vise Blu/Gry $136.00 111-21400 Wilton 5” 745 HD Mechanics Vise Blu/Gry $190.40 111-21500 Wilton 6” 746 HD Mechanics Vise Blu/gry $244.80 111-21800 Wilton 8” 748A HD Mechanics Vise Blu/Gry $353.60

Part No. Description Price111-11126 Wilton 4-1/2” #674 Red Utility Vise w/Locking Swivel $76.16 111-11127 Wilton 5-1/2” #675 Red Utility Vise w/Locking Swivel $95.74 111-11128 Wilton 6-1/2” #676 Red Utility Vise w/Locking Swivel, max Open

5-1/2” $130.56 111-191 Wilton 6” #656HD Red Utility Vise w/Locking Swivel, max Open 6” $174.08

111-11800 Wilton 8” #648HD Red Utility Vise w/Locking Swivel $244.80

Part No. Description Price111-63302 Wilton 6” WS6 Shop Vise $155.58

Part No. Description Price

111-69999 Wilton 5” Multi-purpose Swivel Base Vise w/V-Jaw $139.26

Roughneck Supply | 2711 So. York St. | Muskogee, OK 74403 | Ph. 918-686-6171 | Fax 918-781-1888 | www.roughnecksupply.com

ROUGHNECK SUPPLY “Wholesale to the OilPatch”

• Jaw width: 6-1/2-Inch • Jaw opening: 6-1/2-Inch• Throat depth: 4-Inch • Pipe jaw capacity: 1/4-3-1/2-Inch • Made in USA• Jaw width 6 1/2-Inch Jaw opening 6 1/2-Inch Throat depth 4-Inch Pipe jaw 1/4-Inch - 3 1/2-Inch

• Swivel base rotates 180-Degree for quick and easy positioning• Powder coat paint resists scratches and provides a tough, durable finish• Jaw width is 5-1/2-Inch with opening of 5-Inch; throat depth 3-5/16-Inch; pipe jaw capacity is 1/8-2-1/2-Inch

• 25,000 Pound Casting• 4 Lug Base Design• Double Lock Downs• Easy Gliding U Channel• Durable under regular shop

conditions

• Rotating Head For Clamping Material At Any Angle

• Indexed At 90-Degree Left And Right For Quick Set Up

• V-Jaw Holds 1-Inch - 3-Inch Diameter Round Stock Vertically

• Jaw Width 5", Jaw Opening 5 1/4", Throat Depth 3 3/4", Pipe Jaw 1/4" - 2 1/2"• Straight line design reduces thread wear and increases clamping power• Replaceable jaw inserts and pipe jaws with unbreakable spindle and nut• Double lockdown base swivels 360 degrees

Tradesman Vise

MechanicsVise

Utility Vise

Shop Vise Multi-Purpose Vise

Page 8: ROUGHNECK SUPPLYroughnecksupply.com/pdf/jet_wilton_flier.pdf2 Roughneck Supply | 2711 So. York St. | Muskogee, OK 74403 | Ph. 918-686-6171 | Fax 918-781-1888 ... • Cast Iron Wheel

8

Part No. Description Price

111-11106 Wilton 6” Bench Vise 6” Jaw Width/Swivel Base $99.01

Part No. Description Price

111-33150 Wilton 150 Bench Vise Clamp-On Base 3” Jaw Width 2-1/2” Opening $28.29

Part No. Description Price

111-10010 Wilton 6” ATV All Terran Vise Hitch or Bench Mount $152.32

Part No. Description Price111-86200 Wilton 1800S-8” F-Clamp Regular Duty Classic $36.99 111-86210 Wilton 1800S-12” F-Clamp Regular Duty Classic $42.43 111-86220 Wilton 1800S-18” F-Clamp Regular Duty Classic $47.87 111-86230 Wilton 1800S-24” F-Clamp Regular Duty Classic $50.05

Part No. Description Price

111-27208 Wilton 1-1/2 - 6-1/2” Jaw Opening 40series C-Clamp $137.09

Part No. Description Price

111-14142Wilton 00 Series Forged C-Clam Heavy-Duty, 0-4” Jaw Opening, 2-1/4” Throat

$72.90

Roughneck Supply | 2711 So. York St. | Muskogee, OK 74403 | Ph. 918-686-6171 | Fax 918-781-1888 | www.roughnecksupply.com

ROUGHNECK SUPPLY “Wholesale to the OilPatch”

• Made From High Strength Steel

• Double Lock Down Swivel Base

• Large Anvil Work Surface

• Portable, lightweight design perfect for home use

• Cast-iron construction and built-in pipe jaws add durability and utility

• Steel guide bars keep jaws aligned

• Fits a standard 2 hitch and includes a hitch pin for security.”• Can be mounted on a bench or trailer for even greater versatility with the

included mounting bracket.• Lightweight and with an integrated carrying handle, the ATV is designed for

easy transport.• Patented 360Degree locking handle secures the handle

• Black oxide spindle resists wear and tear while impeding rust

• Copper plated spindles and Perma-Pads resist welding spatter

• Drop forged arm provides minimal flex under heavy work loads

• Forged sliding arm design reduces clamping setup time

• New hex nut design makes replacing pads and spindles easy

• Recommended for Heavy Industrial and Construction Job Site demands

• 100 Series Model Frames are forged of superior quality steels

• Forged square head spindle with rolled thread. Black Oxide coating for added strength • 1-3/4-Inch-6-1/2-Inch Jaw Opening

• 3-3/8-Inch Throat Depth• Hot Upset Square Head On Spindle

Withstands Higher Torque

General Purpose Vise

ATVAll-Terrain

Vise

1800 Series F-Clamps

100 Series C-Clamps O-Series Brute ForceC-Clamps

Page 9: ROUGHNECK SUPPLYroughnecksupply.com/pdf/jet_wilton_flier.pdf2 Roughneck Supply | 2711 So. York St. | Muskogee, OK 74403 | Ph. 918-686-6171 | Fax 918-781-1888 ... • Cast Iron Wheel

9

Part No. Description Price111-14214 Wilton 2” 402 C-Clamp 0-2-1/2” Opening $10.06 111-14228 Wilton 3” 403 C-Clamp 0-3” Opening $13.32 111-14242 Wilton 4” 404 C-Clamp 0-4-1/4” Opening $20.13 111-14256 Wilton 6” 406 C-Clamp 0-6” Opening $31.01 111-14270 Wilton 8” 408 C-Clamp 0-8-1/4” Opening $39.17 111-14284 Wilton 10” 410 C-Clamp 0-10” Opening $53.31 111-14298 Wilton 12” 412 C-Clamp 0-12” Opening $84.86

Part No. Description Price

111-14300 Wilton 2” 402SF C-Clamp Hi-Vis Yellow Opens 0-2-1/2” $10.06

111-14301 Wilton 3” 402SF C-Clamp Hi-Vis Yellow Opens 0-3” $13.32

111-14302 Wilton 4” 402SF C-Clamp Hi-Vis Yellow Opens 0-4-1/4” $20.13

111-14303 Wilton 6” 402SF C-Clamp Hi-Vis Yellow Opens 0-6” $31.01

111-14305 Wilton 8” 402SF C-Clamp Hi-Vis Yellow Opens 0-8-1/4” $39.17

111-14306 Wilton 10”402SF C-Clamp Hi-Vis Yellow Opens 0-10” $53.31

Part No. Description Price

111-14243 Wilton 404-P Series 4” C-Clamp 0”-4-1/4” Copper Plated Spindle and Perma-Pads $21.22

111-14257 Wilton 406-P Series 6” C-Clamp 0”-6-1/16” Copper Plated Spindle and Perma-Pads $32.64

111-14271 Wilton 408-P Series 8” C-Clamp 0”-8-1/4” Copper Plated Spindle and Perma-Pads $40.26

111-14285 Wilton 410-P Series 10”C-Clamp 2”-10-1/4” Copper Plated Spindle and Perma-Pads $57.66

Part No. Description Price

111-22002 Wilton 3”540A-3 Carriage Clamp Opens 0-3” Ductile Iron $8.44

111-22009 Wilton 14” 540A-14 Carriage Clamp Ductile Iron Opens 0-14” $44.61

Part No. Description Price

111-21302 Wilton 1” #51 C-Clamp Super Jr Forged Steel Opens 0-1” $4.62

111-21305 Wilton 2” #54 C-Clamp Super Jr Forged Steel Opens 0-2” $7.62

Roughneck Supply | 2711 So. York St. | Muskogee, OK 74403 | Ph. 918-686-6171 | Fax 918-781-1888 | www.roughnecksupply.com

ROUGHNECK SUPPLY “Wholesale to the OilPatch”

• 2-1/8-Inch Jaw Opening• 2-1/4-Inch Throat Depth• Drop-forged steel frame, regular-duty with Extra Deep-Throat• Black Oxide Coated Spindles and Perma-Pad Resist Corrosion, and are

Replaceable

• Opening Capacity Max 0 - 4 1/4” • Spindle Diameter ¾” • Throat Depth 3¼” • Height 1.5” • Width 5.6” • Length 10.3” • Industry’s top choice for maintenance, production and repair operations • Drop forged, regular duty with extra deep throat • Innovative frame geometry for maximum strength • Copper plated spindle and Perma-pad® for resistance to welding spatter and

corrosion

• Drop-forged, regular-duty with extra deep-throat• Coated in high-visibility yellow which conforms to the

OSHA safety color standard• Powder-coated paint resists scratches and

while providing a tough, durable finish• V grooved anvil allows

secure holding of all materials including rounds, squares and flats

• Frames made from high strength Ductile Iron Castings• Sliding Pin (Vise Type) Handle,

Single Acme Thread Rolled Spindle and Oscillating Ball and Socket Tip

• Walton-Feet’s Heaviest-Duty Carriage Clamp Available

• Super-Junior Clamps are Forged Steel with Heat Treated Frames

• Steel Screws Are Zinc Plated for Longer Life

• Meets Fed Spec Ggg-C-406D, Type I, Class E Very Light Service

400 Series C-Clamps Hi-Vis 400 Series C-Clamps

Spark-Duty400P Series

540A Series Carriage C-Clamps

Super Junior - C-Clamps

Page 10: ROUGHNECK SUPPLYroughnecksupply.com/pdf/jet_wilton_flier.pdf2 Roughneck Supply | 2711 So. York St. | Muskogee, OK 74403 | Ph. 918-686-6171 | Fax 918-781-1888 ... • Cast Iron Wheel

10

Part No. Description Price111-32414 Wilton 24 oz BASH Ball Pein Hammer w/14” Handle $30.46 111-30216 Wilton 24 oz BASH Cross Pein Hammer w/16” Handle $34.82

Part No. Description Price111-20212 Wilton 2.5 lb BASH Sledge Hammer Hi-Viz w/12” Handle $33.73 111-20412 Wilton 4 lb BASH Sledge Hammer Hi-Vis w/12” Handle $38.08 111-20416 Wilton 4 lb BASH Sledge Hammer Hi-Vis w/16” Handle $44.61

Part No. Description Price111-20616 Wilton 6 lb BASH Sledge Hammer Hi-Vis w/16” Handle $54.40 111-20624 Wilton 6 lb BASH Sledge Hammer Hi-Vis w/24” Handle $59.84 111-20630 Wilton 6 lb BASH Sledge Hammer Hi-Vis w/30” Handle $63.10 111-20636 Wilton 6 lb BASH Sledge Hammer Hi-Vis w/36” Handle $67.46 111-20816 Wilton 8 lb BASH Sledge Hammer Hi-Vis w/16” Handle $64.19 111-20824 Wilton 8 lb BASH Sledge Hammer Hi-Vis w/24” Handle $69.63 111-20830 Wilton 8 lb BASH Sledge Hwmmer Hi-Vis w/30” Handle $73.98 111-20836 Wilton 8 lb BASH Sledge Hammer Hi-Vis w/36” Handle $78.34 111-21024 Wilton 10 lb BASH Sledge Hammer Hi-Vis w/24” Handle $81.60 111-21030 Wilton 10 lb BASH Sledge Hammer Hi-Vis w/30” Handle $87.04 111-21036 Wilton 10 lb BASH Sledge Hammer Hi-Vis w/36 Handle $91.39 111-21224 Wilton 12 lb BASH Sledge Hammer Hi-Vis w/24” Handle $93.57 111-21230 Wilton 12 lb BASH Sledge Hammer Hi-Vis w/30” Handle $97.92 111-21236 Wilton 12 lb BASH Sledge Hammer Hi-Vis w/36” Handle $102.27 111-21430 Wilton 14 lb BASH Sledge Hammer Hi-Vis w/30” Handle $106.62 111-22036 Wilton 20 lb BASH Sledge Hammer Hi-Vis w/36” Handle $155.58

Roughneck Supply | 2711 So. York St. | Muskogee, OK 74403 | Ph. 918-686-6171 | Fax 918-781-1888 | www.roughnecksupply.com

ROUGHNECK SUPPLY “Wholesale to the OilPatch”

• Unbreakable Technology - Steel core eliminates breaking during overstrikes• Hi-Vis Head - Drop forged 46 HRC steel head endures the most demanding applications• Safety Plate - Secures head to handle preventing head dislodging• Ergonomic Handle - shaped and thickened for improved comfort and less vibration• No-Slip Grip - Vulcanized rubber handle for secure grip while striking

• Unbreakable Technology - Steel core eliminates breaking during overstrikes

• Hi-Vis Head - Drop forged 46 HRC steel head endures the most demanding applications

• Safety Plate - Secures head to handle preventing head dislodging

• Anti-Vibe Neck - Thick, tapered neck absorbs vibration reducing worker fatigue

• No-Slip Grip - Vulcanized rubber handle for secure grip while striking

• Safety Plate prevents head from dislodging• Anti-Vibe Neck with tapered design eliminates vibration from striking• No-Slip Grip made from vulcanized rubber ensures secure hold• Patented Unbreakable Technology made from spring steel rods throughout allows hammer

to take maximum abuse with minimal wear and tear

Hammers

111-32414 111-30216

Page 11: ROUGHNECK SUPPLYroughnecksupply.com/pdf/jet_wilton_flier.pdf2 Roughneck Supply | 2711 So. York St. | Muskogee, OK 74403 | Ph. 918-686-6171 | Fax 918-781-1888 ... • Cast Iron Wheel

11

Part # Description Price 155-38006 CGW 6 x 3/4 x 1 A24-Q-V 4,456 rpm (ea) $10.60 155-38008 CGW 6 x 3/4 x 1 A46-M-V 4,456 rpm (ea) $10.60 155-38010 CGW 6 x 3/4 x 1 A80-M-V 4,456 rpm (ea) $10.60 155-38011 CGW 6 x 1 x 1 A24-Q-V 4,456 rpm (ea) $11.51 155-38013 CGW 6 x 1 x 1 A46-M-V 4,456 rpm (ea) $11.51 155-38015 CGW 6 x 1 x 1 A80-M-V 4,456 rpm (ea) $11.51 155-38021 CGW 8 x 1 x 1 A24-Q-V 3,600 rpm (ea) $17.07 155-38023 CGW 8 x 1 x 1 A46-M-V 3,600 rpm (ea) $17.07 155-38025 CGW 8 x 1 x 1 A80-M-V 3,600 rpm (ea) $17.07 155-38031 CGW 10 x 1.5 x 1.25 A24-Q-V 2,483 rpm (ea) $39.45 155-38033 CGW 10 x 1.5 x 1.25 A46-M-V 2,483 rpm (ea) $39.45 155-38035 CGW 10 x 1.5 x 1.25 A80-M-V 2,483 rpm (ea) $39.45

Part # Description Price 078-22012 8” Wide Face Wire Wheel (.014x1-1/2x2” AH) $56.54078-22013 8” Wide Face Wire Wheel (.020x1-1/2x2” AH) $54.98078-22081 8” Medium Face Wire Wheel (.006x5/8”x2” AH) $34.34078-22085 8” Medium Face Wire Wheel (.0118x5/8”x2” AH) $29.96078-22086 8” Medium Face Wire Wheel (.014x5/8”x2” AH) $28.92

Osborn Wire Wheels for Jet Bench Grinders

CGW Bench Grinding Wheels for Jet Bench Grinders1” Hole, Installed Telescopic Bushings for 3/4”, 5/8”, and 1/2” Arbors

Part # Description Price 078-75021 1/2” Arbor x 2” AH Adapter $1.82078-75022 5/8” Arbor x 2” AH Adapter $1.82078-75025 1” Arbor x 2” AH Adapter $1.85

Part # Description Price 078-22006 6” Wide Face Wire Wheel

(.008x1-1/4x2” AH)$52.31

078-22060 6” Wide Face Wire Wheel (.010x1-1/4x2” AH)

$38.81

078-22066 6” Medium Face Wheel (.014x7/8”x2” AH)

$20.76

Part # Description Price 078-22111 10” Medium Face Wire Wheel (.0118x1-1/4”x2”AH) $49.03078-22112 10” Medium Face Wheel Wire (.014x1-1/4x2” AH) $49.25

Roughneck Supply | 2711 So. York St. | Muskogee, OK 74403 | Ph. 918-686-6171 | Fax 918-781-1888 | www.roughnecksupply.com

ROUGHNECK SUPPLY “Wholesale to the OilPatch”

Page 12: ROUGHNECK SUPPLYroughnecksupply.com/pdf/jet_wilton_flier.pdf2 Roughneck Supply | 2711 So. York St. | Muskogee, OK 74403 | Ph. 918-686-6171 | Fax 918-781-1888 ... • Cast Iron Wheel

COMPANY BRANDS

JET Tools

For more than 50 years, JET has provided the industrial marketplace with superior quality, innovation and service. Fueled by innovative product development and bolstered by hundreds of authorized dealers, JET continues to establish itself as the premier full-line industrial tool brand.

WILTON

As America’s leader in industrial workholding equipment and striking tools for more than 70 years, Wilton has a reputation for quality, durability and reliability that is unmatched by any other brand.