Roto Roof Windows Product brochure 2013

2013

20

08

Product brochure 2013Roof windows and accessories ‘made in Germany’*

Price list effective from 01.06.2013. All prices exclude VAT

* O

ver

90

% o

f

ou

r p

rod

ucts

2013

Roto DesignoNatural lighting

In view of new bioclimatic challenges, greenhouse gas emissions should be substantially and rapidly reduced. Lowering the energy consumption of buildings is one of the measures taken to achieve this focus and roof windows play an important role in the energy provision and conservation.

Optimum brightness and energy

savings! Roto Designo roof windows

do not open with a control bar at

the top of the window which

means no unnecessary reduction

of the glass surface area, letting

the most light possible to enter.

The exterior profiles are thinner

to allow for a larger glazing surface

area*.

Unleash your imagination with

the wide range of dimensions in

the Designo range and combine

the windows as you wish to create

large bright and pleasant spaces

in your home!

Available sizes

Available sizes

* Up to 10% more light area than standard windows in equivalent dimensions

Application adviceWe primarily recommend the series Designo R4 K/HRotoTronic roof windows to be used in conjunction with Roto roof windows series Designo R7 K/H in non-accessible areas.

NoteNot all series depicted in the size chart are necessarily available with all types of glazing.

1 Series 73 Conservation roof window2 Designo R7 Oak roof window

WDF R7

WDF R8

WDT R4

98

0

WDF R8 WDF R7 WDT R4

WDF R8 WDF R7 WDF R71

WDF R72

WDT R4


WDF R72

WDT R4



WDF R72

WDT R4



WDF R72

WDT R4

WDF R72



WDT R4



WDF R8 WDF R7


WDF R7


WDF R8 WDF R8

78

0

118

0

140

016

00

540 650 740 940 1140 1340

97

11

1416

5 6 7 9 11 13Size

Width

Hei

gh

t

WDF R8 WDF R7

WDF R7 WDF R7

The brand recommended by professionals Quality ‘made in Germany’*

The family group, Roto Frank AG,

was founded in 1935 near Stuttgart

by Wilhelm Frank, the inventor of

the first tilt and turn window fitting

and the retractable loft ladder.

Roto is comprised of two divisions,

one for door and window hardware

technology, and the other for roof

windows. The headquarters of the

roof window division is located in

Bad Mergentheim (Germany), with

a sales office for the UK in Rugby,

Warwickshire.

Roto designs, develops and sells

PVC and timber roof windows with

high added value as well as for

energy efficiency, saving time

with quicker and easier installation.

As the brand recommended by

professionals, Roto distributes its

products exclusively in the

professional merchant network.

In a move labelled ‘zero defect’ to

ensure maximum quality, Roto has

invested in ultra-modern production

equipment, whilst respecting strict

quality controls in line with the

protection of the environment

according to international standards

ISO 9001 and 14001.

Choosing to install Roto products

today is to trust a recognised brand

recommended by professionals

and oriented towards permanent

satisfaction of its customers!

The Roto group

Built by professionals Sold by professionals Installed by professionals

* O

ver

90%

of

our

prod

ucts

*

* Lo

ok f

or F

SC

cer

tified

pro

duct

s

**

Roof windows

Flashings

Accessories

Table of contents

Vision DesignoEnergy efficiencyThe Roto Principle Exterior and interior finishes Insulation glazing overviewTechnical glazing specifications Ordering guide

Designo R7 and series 73 Timber top-third pivot roof window

Oak top-third pivot roof window

Conservation roof window PVC top-third pivot roof window

Designo R8 Timber top-hung roof window

PVC top-hung roof window

Designo R4 RotoTronic Radio remote roof window

Switch roof window

Special application windows Designo R1 WFA Combining roof window

Designo R3 WDA Side-hung emergency escape

Designo R5 WRA Smoke extraction roof window

Standard and modular flashings Roof covering Modular flashing Flat roof frame Wedge-shaped frame External connection kit

The Roto modular systemTimber effect optionsPVC inner lining Exterior sun screening Interior blinds Venetian blind

Pleated blind

Roller blind

Blackout roller blind

Other accessories Installation drawingRotoCampus Terms and Conditions of SalesThe Roto promise and service

246 8 10 1214

1618202122

242627

2830 31

3234

36

37

3940 41 44 4546

48505152

5456586062

66676869

1Roto Product brochure 2013

Roto Product brochure 20132

Vision DesignoOur vision of high quality roof windows

Roto Product brochure 2013 3

Vision DesignoOur vision of high quality roof windows

Always one step ahead Our vision of high quality roof windows

Easy and quick to fit

More energy savings

More natural lighting

Maximum convenience

Up to 30 % installation time won1

Clip type assembly used for the exterior profiles

(no screws)

Bracket and thermal insulation system pre-fitted2

High insulation and reduction of thermal bridges

Treatment of air permeability

More natural light and heat

Up to 10 % more light area3

Slimmer exterior profiles and no control bar

at the top of the window

More natural light

Outwards opening4

so not to encroach on the living space

One handle at the bottom of the sash

for all functions (opening, ventilation, cleaning)

1 Compared to a standard roof window with optional energy efficiency packages2 Roto exclusivity unique in UK 3 For Designo R7 and R4 compared to standard roof windows for dimensions equivalent4 Outwards opening invented by Wilhelm Frank in 1968


Isothermal diagram Designo R8with pre-fitted insulation collar

Isothermal diagram Designo R8without pre-fitted insulation collar

Ext. temperature T(e) = - 18 °CInt. temperature T(i) = +20 °C

Ext. temperature T(e) = - 18 °CInt. temperature T(i) = +20 °C

Glazing Glazing

Window sash Window sash

Window external frame

Window external frame

Pre-fitted insulation collar

15,28 °C 10,49 °C

4

Energy efficiencyDesigno range

Energy efficiencyUnderstand what makes the Designo Range completely different

In order to combat climate change by substantially and rapidly reducing greenhouse gas emissions, low-energy

constructions have become a major issue. Making the most of its considerable German know-how in the field

of ecobuilding, Roto has invested heavily in the technical aspects of the Roto Designo roof window range,

to make sure that it provides a convincing answer to the new thermal requirements of passive or low energy

consumption buildings.

High thermal insulation

Reduction of thermal bridges:pre-fitted thermal insulation collar*

(see cross-section below nb. 1)

High thermalinsulation: double or triple**

low energy Roto glazing

High air permeability: vapour barrier included as

standard in accordance with

DIN EN 12207 (classification A3)

‘Blower Door’ test (DIN EN 13829): double rubber seal to ensure

air tightness requirement

Designo R7 PVC, with low-energy glazing, optional pre-fitted insulation collar (1) and vapour barrier as standard (2)

Air permeability

U-value of 0,80 W/m²K for Designo R8 (PVC) with the new triple glazing Roto blueTec Plus (9P) according to the ‘Passiv house’ standard

* Optional on R7 and R4 RotoTronic and as standard on R8 ** Triple glazing only for R8

1

2


More natural light

Greater energy savings: double or triple** low emissivity

glazing and exterior sun screening

to get maximum natural light

whilst maintaining energy saving

in winter and summer

Designo R7 PVC, double insulation glazing and Screen exterior blind

Slimmer external profiles for a greater light area Combination side-by-side or stacked for even more light

Natural heat

Greater light area*: slimmer external profiles for

a greater light area compared

to other windows on the market

More light: window height up to 1600 mm

for optimal space utilisation

and light yield (R4, R7, R8)

5

Energy efficiencyDesigno range

Energy efficiencyUnderstand what makes the Designo Range completely different

* For Designo R4 RotoTronic and R7

** Triple glazing for Designo R8 only


The Roto Principle:More freedom. More convenience.

TheRoto Principle


Roto DesignoOpening

Designo R7 Top-third pivot roof window

Top-third opening

Single handled operation at the bottom

Double low emissivity glazing

Optional thermal insulation system pre-fitted*

No obstructive sash and comfortable view

Designo R8 Top-hung roof window

Window sash opened steplessly to 45°

Single handled operation at the bottom

Double or triple low emissivity glazing

Thermal insulation system pre-fitted*

Maximum headroom and panoramic view

Designo R4 RotoTronicElectrical roof window

Electric centre-pivot opening

Double low emissivity glazing

Optional thermal insulation system pre-fitted*

Reserved for spaces that are difficult to access

* Roto exclusivity unique in UK

Perfectly reflecting the Roto policy of ‘More freedom for more convenience’, the Designo roof windows range

is really ‘better conceived’. In comparison to the conventional centre-pivot roof windows, the Roto Designo roof

window’s opening axis is positioned at the top of the window which allows the sash to open outwards with one

handle at the bottom. There is no obtrusive sash jutting into your living space, blocking the view or creating

an obstacle course on your way to the open window.


SpecificationsExterior and interior finishes

Exterior finishes

Roto DesignoExterior and interior finishes

Aluminium anthracite-metallic R703 (standard)

Titanium (upon request)

Copper (upon request)

e.g. RAL red (upon request)

8


SpecificationsExterior and interior finishes

Roto DesignoExterior and interior finishes

9

The benefits at a glance

Coated pine or exclusive to Roto = Oak

(please refer to page 20)

Material: solid timber with multi-layer sections

Adapted for all types of room

Tradition, quality and style

Natural material requiring little maintenance


White PVC finish RAL 9016 (available in 5 timber effect

options please refer to page 50)

Material: PVC profile added with a metallic web plate

Exceptional acoustic and thermal insulation

Adapted for all types of room

Resistant, long-lasting and easy to clean

100 % recyclable

Interior finishes

Timber effect options for interior PVC finishes Prices for timber effect options please refer to page 50

KK = PVC pine effect option

KM = PVC dark oak effect option

KS = PVC mahogany effect option

KN = PVC walnut effect option

KG = PVC golden oak effect option

PVC Timber


SpecificationsRoto glazing overview

Roto insulation glazing overviewTechnical specifications and properties

10

Technical glazing specificationsThermal insulating value Ug: Designo R8: 1,0 W/m²KDesigno R4/R7: 1,1 W/m²K (timber)Total energy permeability g: 50 %Light transmission TL: 71 %UV light transmission TUV: 26 %

Thermal insulationSafety against destruction from outside

Toughened safety glass TSG: 4 mm exterior single-pane safety glass for increased securitySpecial gas filling: 16 mm space between panes with argon gas filling for increased thermal insulationInterior pane: 4 mm float glass with precious metal coating for increased thermal insulation


Thermal insulation and privacy screeningSafety against destruction from outside

Roto Ornament (glazing 4) for roof windows WDF R8/R7 K/H, WDT R4 K/H and WDA R3 K/Hdouble safety and thermal glazing with ornamental structure 504 (TSG 4 / argon 16 / float 4)

Toughened safety glass TSG: 4 mm exterior single-pane safety glass for increased security with ornamental struc-ture 504 for privacy screeningSpecial gas filling: 16 mm space between panes with argon gas filling for increased thermal insulationInterior pane: 4 mm float glass with precious metal coating for increased thermal insulation

Roto blueLine (glazing 5) for roof windows WDF R8 K/H, WDF R7 K/H, WDT R4 K/H and WDA R3 K/Hdouble safety and thermal glazing (TSG 4 / argon 16 / float 4)

Roto blueLine Plus (glazing 8) 8A for roof windows WDF R8 K/H, WDF R7 K/H, WDT R4 K/H, WRA R5 K/H and 8F for WFA R1 K/H8A: double safety and thermal insulation glazing with cleaning-aided coating and sound insulation (TSG 4 / argon 14-16 / LSG 6)8F: double safety and thermal insulation glazing and sound insulation (TSG 4 / argon 14 / LSG 6)


The Aquaclear coating on the outside enables long-lasting cleanliness and easier cleaningProtection against condensation and freezing upSun and heat protectionSafety against destruction from outside and insideApplications for which an ‘LSG’ (laminated safety glass) pane is required

Toughened safety glass TSG: 4 mm exterior single-pane safety glass for increased security and with cleaning-aided coatingSpecial gas filling: 16 mm (14 mm for R7/R4) space between panes with argon gas filling for increased thermal insulationLaminated safety glass LSG: 6 mm laminated safety glass with precious metal coating for increased thermal insulation, heat protection and increased security



Roto insulation glazing overviewTechnical specifications and properties

11Subject to change

Technical glazing specificationsThermal insulating value Ug: 0,83 W/m²KTotal energy permeability g: 51 %Light transmission TL: 69 %UV light transmission TUV: 1 %

Triple insulation glazingThe Aquaclear coating on the outside enables long-lasting cleanliness and easier cleaningProtection against condensation and freezingSun and heat protectionSafety against destruction from outside and inside


Triple insulation glazingThe Aquaclear coating on the outside enables long-lasting cleanliness and easier cleaningProtection against condensation and freezingSun and heat protectionSafety against destruction from outside and inside

Roto blueTec (glazing 9G) for roof windows WDF R8 K/Htriple safety and thermal insulation glazing with cleaning-aided coating (TSG 4 / argon 10 / TSG 4 / argon 10 / LSG 4)

Roto blueTec Plus (glazing 9P) for roof windows WDF R8 K/Htriple safety and thermal insulation glazing with cleaning-aided coating and sound insulation (TSG 4 / krypton 10 / TSG 4 / krypton 10 / LSG 4)

Toughened safety glass TSG: 4 mm exterior single-pane safety glass with pyrolytic coating on the outside to prevent fogging upSpecial gas filling: 10 mm space between panes with argon gas filling for increased thermal insulationToughened safety glass TSG: 4 mm intermediate single-pane safety glass with precious metal coating for increasedthermal insulation, heat protection and securitySpecial gas filling: 10 mm space between panes with argon gas filling for increased thermal insulationLaminated safety glass LSG: 4 mm interior laminated safety glass with precious metal coating for increased thermal insulation, heat protection and increased security

Toughened safety glass TSG: 4 mm exterior single-pane safety glass with pyrolytic coating on the outside to preventfogging upSpecial gas filling: 10 mm space between panes with krypton gas filling for increased thermal insulationToughened safety glass TSG: 4 mm intermediate single-pane safety glass with precious metal coating for increased thermal insulation, heat protection and securitySpecial gas filling: 10 mm space between panes with krypton gas filling for increased thermal insulation.Laminated safety glass LSG: 4 mm interior laminated safety glass with precious metal coating for increased thermal insulation, heat protection and increased security


Triple insulation glazingThe Aquaclear coating on the outside enables long-lasting cleanliness and easier cleaningProtection against condensation and freezingSun and heat protectionSafety against destruction from outside and insideParticularly effective in buildings near to urban traffic, motorways, train stations and airports

Roto acousticLine NE (glazing 6E) for roof windows WDF R8 K/Htriple safety and thermal insulation glazing with cleaning-aided coating and sound insulation (TSG 4 / krypton 10 / TSG 4 / krypton 10 / LSG 4)

Toughened safety glass TSG: 8 mm exterior laminated safety glass with pyrolytic coating on the outside to prevent fogging upSpecial gas filling: 7 mm space between panes with krypton gas filling for increased thermal insulationToughened safety glass TSG: 4 mm intermediate single-pane safety glass with precious metal coating for increasedthermal insulation, heat protection and securitySpecial gas filling: 7 mm space between panes with krypton gas filling for increased thermal insulationLaminated safety glass LSG: 6 mm interior laminated safety glass with precious metal coating for increased thermal insulation, heat protection and increased security



12

Technical glazing specifications and properties

Windowtype

Window name Thermaltransmissionvalue UW

without insulation collar WD

Thermal transmission value UW with insulation collar WD

Thermalinsulatingvalue Ug

with insulationcollar WD

Solar factor SW Light transmission TL in %

UV% Weighted sound reduction index

Reaction to fire classification

Winter convenience

Summer convenience

Acoustic

Unit UW in W/m²K UW in W/m²K Ug in W/m²K RW (C, Ctr)

Norm EN 12567-2 EN 12567-2 EN 673 EN 13363-2 EN 410 EN 410 EN 20140-3in accordance with

EN 13501-1

Top-hung roof window – Designo R8

WDF R84 H – 1,2 1,0 0,50 72 26 34 (-2 ; -5) C, s2-d0 ++ + +

WDF R84 K – 1,2 1,0 0,50 72 26 34 (-2 ; -5) B, s3-d0 ++ + +

WDF R85 H – 1,2 1,0 0,50 71 26 34 (-2 ; -5) C, s2-d0 ++ + +

WDF R85 K – 1,2 1,0 0,50 71 26 34 (-2 ; -5) B, s3-d0 ++ + +

WDF R88A H – 1,2 1,0 0,48 68 1 39 (-2 ; -5) C, s2-d0 ++ +++ ++

WDF R88A K – 1,2 1,0 0,48 68 1 38 (-2 ; -5) B, s3-d0 ++ +++ ++

WDF R89G H – 1,0 0,8 0,51 69 1 37 (-2 ; -6) C, s2-d0 +++ ++ ++

WDF R89G K – 0,99 0,8 0,51 69 1 37 (-2 ; -5) B, s3-d0 +++ ++ ++

WDF R89P H – 0,82 0,5 0,38 56 1 37 (-2 ; -6) C, s2-d0 +++ ++ ++

WDF R89P K – 0,80 0,5 0,38 56 1 37 (-2 ; -5) B, s3-d0 +++ ++ ++

WDF R86E H – 1,0 0,7 0,40 59 1 42 (-2 ; -6) C, s2-d0 ++ + +++

WDF R86E K – 1,0 0,7 0,40 59 1 42 (-2 ; -6) B, s3-d0 ++ + +++

Top-third roof window – Designo R7

WDF R74 H 1,5 1,3 1,0 0,50 72 26 32 (-1 ; -4) C, s2-d0 ++ + +

WDF R74 K 1,4 1,3 1,0 0,50 72 26 32 (-1 ; -3) B, s3-d0 ++ + +

WDF R75 H 1,5 1,3 1,0 0,50 71 26 32 (-2 ; -6) C, s2-d0 ++ +++ +

WDF R75 K 1,4 1,3 1,0 0,50 71 26 30 (-2 ; -5) B, s3-d0 ++ +++ +

WDF R78A H 1,5 1,3 1,1 0,48 68 1 37 (-2 ; -5) C, s2-d0 ++ +++ ++

WDF R78A K 1,5 1,3 1,1 0,48 68 1 38 (-2 ; -5) B, s3-d0 ++ +++ ++

Electrical roof window – Designo R4 RotoTronic

WDT R44 H 1,5 1,3 1,0 0,50 72 26 32 (-1 ; -4) C, s2-d0 ++ + +

WDT R44 K 1,4 1,3 1,0 0,50 72 26 32 (-1 ; -3) B, s3-d0 ++ + +

WDT R45 H 1,5 1,3 1,0 0,50 71 26 32 (-2 ; -6) C, s2-d0 + ++ +

WDT R45 K 1,4 1,3 1,0 0,50 71 26 32 (-2 ; -5) B, s3-d0 + ++ +

Side-hung emergency escape – Designo R3

WDA R35 K 1,4 1,3 1,0 0,50 71 26 32 (-2 ; -5) B, s3-d0 ++ + +

Smoke extraction roof window – Designo R5

WRA R58A H – 1,3 1,1 0,48 68 1 37 (-1 ; -5) B 300-E ++ + ++

WRA R58A K – 1,3 1,1 0,48 68 1 38 (-2 ; -5) B 300-E ++ + ++

Technical specifications for other products upon request



13

Windowtype

Window name Thermaltransmissionvalue UW

without insulation collar WD

Thermal transmission value UW with insulation collar WD

Thermalinsulatingvalue Ug

with insulationcollar WD

Solar factor SW Light transmission TL in %

UV% Weighted sound reduction index

Reaction to fire classification

Winter convenience

Summer convenience

Acoustic

Unit UW in W/m²K UW in W/m²K Ug in W/m²K RW (C, Ctr)

Norm EN 12567-2 EN 12567-2 EN 673 EN 13363-2 EN 410 EN 410 EN 20140-3in accordance with

EN 13501-1

Top-hung roof window – Designo R8

WDF R84 H – 1,2 1,0 0,50 72 26 34 (-2 ; -5) C, s2-d0 ++ + +

WDF R84 K – 1,2 1,0 0,50 72 26 34 (-2 ; -5) B, s3-d0 ++ + +

WDF R85 H – 1,2 1,0 0,50 71 26 34 (-2 ; -5) C, s2-d0 ++ + +

WDF R85 K – 1,2 1,0 0,50 71 26 34 (-2 ; -5) B, s3-d0 ++ + +

WDF R88A H – 1,2 1,0 0,48 68 1 39 (-2 ; -5) C, s2-d0 ++ +++ ++

WDF R88A K – 1,2 1,0 0,48 68 1 38 (-2 ; -5) B, s3-d0 ++ +++ ++

WDF R89G H – 1,0 0,8 0,51 69 1 37 (-2 ; -6) C, s2-d0 +++ ++ ++

WDF R89G K – 0,99 0,8 0,51 69 1 37 (-2 ; -5) B, s3-d0 +++ ++ ++

WDF R89P H – 0,82 0,5 0,38 56 1 37 (-2 ; -6) C, s2-d0 +++ ++ ++

WDF R89P K – 0,80 0,5 0,38 56 1 37 (-2 ; -5) B, s3-d0 +++ ++ ++

WDF R86E H – 1,0 0,7 0,40 59 1 42 (-2 ; -6) C, s2-d0 ++ + +++

WDF R86E K – 1,0 0,7 0,40 59 1 42 (-2 ; -6) B, s3-d0 ++ + +++

Top-third roof window – Designo R7

WDF R74 H 1,5 1,3 1,0 0,50 72 26 32 (-1 ; -4) C, s2-d0 ++ + +

WDF R74 K 1,4 1,3 1,0 0,50 72 26 32 (-1 ; -3) B, s3-d0 ++ + +

WDF R75 H 1,5 1,3 1,0 0,50 71 26 32 (-2 ; -6) C, s2-d0 ++ +++ +

WDF R75 K 1,4 1,3 1,0 0,50 71 26 30 (-2 ; -5) B, s3-d0 ++ +++ +

WDF R78A H 1,5 1,3 1,1 0,48 68 1 37 (-2 ; -5) C, s2-d0 ++ +++ ++

WDF R78A K 1,5 1,3 1,1 0,48 68 1 38 (-2 ; -5) B, s3-d0 ++ +++ ++

Electrical roof window – Designo R4 RotoTronic

WDT R44 H 1,5 1,3 1,0 0,50 72 26 32 (-1 ; -4) C, s2-d0 ++ + +

WDT R44 K 1,4 1,3 1,0 0,50 72 26 32 (-1 ; -3) B, s3-d0 ++ + +

WDT R45 H 1,5 1,3 1,0 0,50 71 26 32 (-2 ; -6) C, s2-d0 + ++ +

WDT R45 K 1,4 1,3 1,0 0,50 71 26 32 (-2 ; -5) B, s3-d0 + ++ +

Side-hung emergency escape – Designo R3

WDA R35 K 1,4 1,3 1,0 0,50 71 26 32 (-2 ; -5) B, s3-d0 ++ + +

Smoke extraction roof window – Designo R5

WRA R58A H – 1,3 1,1 0,48 68 1 37 (-1 ; -5) B 300-E ++ + ++

WRA R58A K – 1,3 1,1 0,48 68 1 38 (-2 ; -5) B 300-E ++ + ++

+++ Reinforced ++ Well adapted + Adapted


SpecificationsOrdering guide

How is a Roto ordering reference composed?

WDF = Roof window

AL = Exterior finish

Interior finish (here HN = Timber neutral)

WD = Insulation collar

Window type Designo R7 with Roto blueLine glazing (5)

7/11 = Dimension

WDF R75 H WD AL 7/11 = Roof window description

WDF = Roof windowWDT = RotoTronic roof windowWFA = Side-hung emergency escape (roof-light)WRA = Smoke extraction roof windowWFA = Combining roof window

WDF R75 H WD AL 7/11 = Series description

R7 = R7 series top-third roof window, n/a, e.g.: R8, R4, R5, R3, …R75 = Glazing, n/a, e.g.: …5, …8A, …9G, …

WDF R75 H WD AL 7/11 = Interior finish

HN = Timber neutralKW = PVC whiteKK = PVC pine effect optionKM = PVC dark oak effect optionKS = PVC mahogany effect optionKN = PVC walnut effect optionKG = PVC golden oak effect option

WDF R75 H WD AL 7/11 = Thermal insulation

WD = With pre-fitted thermal insulation collar– = Without pre-fitted thermal insulation collar

WDF R75 H WD AL 7/11 = Flashing material

AL = Aluminium Anthracite-metallic (R703)CU = Copper upon requestTV = Titanium upon requestRAL = RAL colour tone upon request

WDF R75 H WD AL 7/11 = Size

7/14 = Frame external dimension 740/140 mm (Width x Height)

Roto ordering guideExample 1 – Roof window


SpecificationsOrdering guide

Roto ordering guideExample 1 – Roof window

Roto ordering guideExample 2 – Flashing

How is a Roto ordering reference composed?

EDR Rx WD 1x1 ZIE AL + Size = Flashing description

EDR = FlashingEFA = Flashing for combining roof windowEBR = Installation frame for flat roofsERA = Wedge-shaped installation frame

EDR Rx WD 1x1 ZIE AL + Size = Series description

Rx = for all Designo roof windows

EDR Rx WD 1x1 ZIE AL + Size = Thermal insulation

WD = With pre-fitted thermal insulation collar

EDR Rx WD 1x1 ZIE AL + Size = Installation type

1x1 = Single installation1x2 = Multiple installation (2; one on top of the other – ‘stacked’)2x1 = Multiple installation (2; one beside the other – ‘side-by-side’)2x2 = Multiple installation (4; ‘quad’)

EDR Rx WD 1x1 ZIE AL + Size = Roofing material

ZIE = Pantiles or profiled tilesSNO = SlateSNH = Plain tilesMUN = Pantiles or hi-profiled tilesSDS = Interlocking slateZSD = Tiles with continuous side-parts

EDR Rx WD 1x1 ZIE AL + Size = Flashing material

AL = Aluminium Anthracite-metallic (R703)CU = CopperTV = Titanium pre-weatheredRAL = RAL colour tone upon request

EDR Rx WD 1x1 ZIE AL + 7/11 = Size

7/11 = Frame external dimension 540/980 mm (Width x Height)

EDR = Standard flashing

Flashing description

Rx = Designo window type

WD = Insulation collar

1 x 1 = Single installation AL = Flashing material (aluminium)

7/11 = DimensionZIE = Pantiles or profiled tiles


Plenty ofheadroom Top-third pivot point

VentilationEasy and practical

Easy and safe cleaningin cleaning position

Design: interior finish in timber, exclusively

in Oak* or PVC (white or 2 timber

effect options available), resistant,

long-lasting and easy to clean

Security: locks in the cleaning position

to secure maintenance

Convenience: ventilation via handle locking point


Easy and quick to fit: supplied fully assembled

Full unobstructed view and much greater headroom: opens outwards with the pivot

at the top-third of the window

More energy savings: vapour barrier as standard*

and optional pre-fitted insulation

collar for high thermal insulation

and better air permeability

Easy handling: one single-handled operation

at the bottom of the window

Designo R7 Top-third pivot roof window


Des

ign

o R

7


WDF = Roof windowH = TimberEDR = Standard flashing

1x1 = Single flashingWD = Optional pre-fitted insulation collarAL = Aluminium anthracite-metallic (R703)

Designo R7 top-third pivot roof windowTimber


Usage:

– All type of room environments

Thermal transmission value UW:

– Glazing 5 / 4 / 8A: UW 1,5 W/m²K

Thermal insulating value Ug:

– Glazing 5 / 4 / 8A: Ug 1,1 W/m²K

Weighted sound reduction index RW:

– Glazing 5: 32 (-2; -6) dB

– Glazing 4: 32 (-1; -4) dB

– Glazing 8A: 37 (-2; -5) dB

Usage: from 15° to 65°

Roof windowDesigno R7 in timber

18

Window size 5/7 5/9 5/11 6/11 7/9* 7/11* 7/14* 7/16* 9/14* 11/9 11/11 13/9 13/14

Window frame external dimensionin cm (Width x Height)

54/78 54/98 54/118 65/118 74/98 74/118 74/140 74/160 94/140 114/98 114/118 134/98 134/140

Light area for roof windows in m2 0,24 0,31 0,39 0,50 0,50 0,57 0,66 0,84 0,97 0,81 1,00 0,96 1,46

Roto blueLine (glazing 5): double safety and thermal insulation glazing (TSG 4 / argon 16 / float 4)

WDF R75 H AL 213,- 227,- 237,- 263,- 243,- 274,- 300,- 323,- 348,- 318,- 350,- 347,- 404,-

Roto Ornament (glazing 4): double safety and thermal glazing with ornamental structure 504 (TSG 4 / argon 16 / float 4)

WDF R74 H AL 222,- 238,- 250,- 279,- 259,- 291,- 320,- 345,- 370,- 338,- 372,- 369,- 432,-

Roto blueLine Plus (glazing 8A): double safety and thermal insulation glazing with cleaning-aided coating and sound insulation (TSG 4 / argon 16 / LSG 6)

WDF R78A H AL 252,- 268,- 280,- 311,- 287,- 324,- 354,- 382,- 411,- 376,- 413,- 410,- 477,-

Single flashing for Designo R7EDR Rx 1x1 ZIE AL 55,- 56,- 57,- 60,- 61,- 64,- 65,- 66,- 67,- 63,- 72,- 68,- 74,-EDR Rx 1x1 SNO AL 55,- 56,- 57,- 60,- 61,- 64,- 65,- 66,- 67,- 63,- 72,- 68,- 74,-EDR Rx 1x1 SNH AL 60,- 63,- 64,- 67,- 68,- 69,- 71,- 72,- 74,- 70,- 76,- 75,- 80,-EDR Rx 1x1 SDS AL 55,- 56,- 57,- 60,- 61,- 64,- 65,- 66,- 67,- 63,- 72,- 68,- 74,-EDR Rx 1x1 MUN AL 64,- 67,- 68,- 71,- 72,- 73,- 75,- 76,- 78,- 74,- 80,- 79,- 84,-

Means Of Escape available as standard in certain sizes

* MOE as standard Index of flashings: please refer to page 40 On stock

Vertical glazing bar: 55,-


Designo R7 top-third pivot roof window with pre-fitted insulation collarTimber


Thermal transmission value UW with WD:

– Double glazing 5 / 4 / 8A:

UW 1,3 W/m²K

Thermal insulating value Ug with WD:

– Double glazing 5 / 4: Ug 1,0 W/m²K

– Double glazing 8A: Ug 1,1 W/m²K

Peripheral thermal insulation system:

– Pre-fitted insulation collar

to reduce thermal bridges

– Vapour barrier included as standard

for high air-permeability

– Double seal in EPDM rubber

to ensure air tightness requirement

Roof windowDesigno R7 in timber with pre-fitted insulation collar

19

Designo R7 timber with optional pre-fitted insulation collar (1) and vapour barrier as standard (2)

12

Window size 5/7 5/9 5/11 6/11 7/9* 7/11* 7/14* 7/16* 9/14* 11/9 11/11 13/9 13/14


54/78 54/98 54/118 65/118 74/98 74/118 74/140 74/160 94/140 114/98 114/118 134/98 134/140



WDF R75 H WD AL 238,- 252,- 262,- 288,- 268,- 299,- 325,- 348,- 373,- 343,- 375,- 372,- 429,-


WDF R74 H WD AL 247,- 263,- 275,- 304,- 284,- 316,- 345,- 370,- 395,- 363,- 397,- 394,- 457,-


WDF R78A H WD AL 277,- 293,- 305,- 336,- 312,- 349,- 379,- 407,- 436,- 401,- 438,- 435,- 502,-

Single flashing for Designo R7 with pre-fitted insulation collar (WD)EDR Rx WD 1x1 ZIE AL 55,- 56,- 57,- 60,- 61,- 64,- 65,- 66,- 67,- 63,- 72,- 68,- 74,-EDR Rx WD 1x1 SNO AL 55,- 56,- 57,- 60,- 61,- 64,- 65,- 66,- 67,- 63,- 72,- 69,- 74,-EDR Rx WD 1x1 SNH AL 60,- 63,- 64,- 67,- 68,- 69,- 71,- 72,- 74,- 70,- 76,- 75,- 80,-EDR Rx WD 1x1 SDS AL 55,- 56,- 57,- 60,- 61,- 64,- 65,- 66,- 67,- 63,- 72,- 68,- 74,-EDR Rx WD 1x1 MUN AL 64,- 67,- 68,- 71,- 72,- 73,- 75,- 76,- 78,- 74,- 80,- 79,- 84,-

ETL recessed flashing available, price on application. All prices exclude VAT. Prices in £ STERLING.

Please allow an extra

35mm to either side of

your window when making

your opening sizes to allow

for insulation collar (WD)

Installer's tip

Much better UW value

with insulation collar (WD)

Top tip

Des

ign

o R

7


Window size 5/7 5/9 7/9* 7/11* 9/11

Window frame external dimension in cm (Width x Height)

54/78 54/98 74/98 74/118 94/118

Light area for roof windows in m2 0,24 0,31 0,48 0,59 0,80


WDF R75 OAK H AL 329,- 359,- 410,- 425,- 487,-


WDF R74 OAK H AL 338,- 370,- 426,- 442,- 507,-

Single flashing for Designo R7EDR Rx 1x1 ZIE AL 55,- 56,- 61,- 64,- 66,-EDR Rx 1x1 SNO AL 55,- 56,- 61,- 64,- 66,-EDR Rx 1x1 SNH AL 60,- 63,- 68-, 69,- 71,-EDR Rx 1x1 SDS AL 55,- 56,- 61,- 64,- 66,-EDR Rx 1x1 MUN AL 64,- 67,- 72,- 73,- 75,-

Diversity is the keyWhether window size or material,

with Roto you simply choose in

accordance with your wishes and

requirements. Whether for a loft

or barn conversion or to provide

a touch of ‘interior chic’, the Roto

Designo R7 Oak roof windows add

the ultimate sense of style. Blending

perfectly with other oak features for

total co-ordination they combine the

look, feel and quality of oak with our

Designo R7 top-third pivot roof windowOak


High pivot hinge – minimal window

protrudes back into living space

One single handle at the bottom

of the window – easier to open

Smaller frame profiles –

maximum light

Safety glass on the outside, thermal

insulation glass on the inside


– With WD: UW 1,3 W/m²K

– Without WD: UW 1,5 W/m²K


Roof windowDesigno R7 in oak

patented top-third pivot

technology. So, you not only have

windows which look sensational,

you have more headroom too.

These roof windows

are also available with

pre-fitted insulation

collar. Prices are as

above, plus £25,- per

window. Information

for ordering can be

found on page 14.

20

WDF = Roof windowH = TimberEDR = Standard flashing


* MOE as standard Index of flashings: please refer to page 40 On stock


Series 73 top-third pivot conservation roof windowTimber


Harmonious integration into the roof

shell with recessed flashing

Predetermined opening position

Good ventilation performance

due to the axis in the upper third

Self-locking cleaning position


– With WD: UW 1,3 W/m²K

– Without WD: UW 1,5 W/m²K

Usage: standard flashing EDR ZIE and EDR SNO from 15° to 65°, recessed flashing ETL SNO from 35° to 65°

Roof windowSeries 73 Conservation roof window

Please add a text line to each order to specify which flashing is required. For any other variation of flashings the price would need to be obtained at time of order.

Window size 5/7 5/9 6/11 7/9 7/11 7/14


54/78 54/98 65/118 74/98 74/118 74/140

Light area for roof windows in m2 0,24 0,31 0,50 0,48 0,59 0,72


WDF 735 CON H AL 389,- 411,- 456,- 484,- 531,- 559,-


WDF 734 CON H AL 398,- 422,- 472,- 500,- 548,- 579,-

Single flashing for Series 73EDR Rx 1x1 ZIE AL CON EDR Rx 1x1 SNO AL CON EDR Rx 1x1 SNH AL CON ETL Rx 1x1 SNO AL CON ETL Rx 1x1 SNH AL CON

Flashing included in the price and in the scope of delivery

These roof windows

are also available with


collar. Prices are as

above, plus £25,- per

window. Information

for ordering can be

found on page 14.

ETL recessed flashing available, price on application. All prices exclude VAT. Prices in £ STERLING. 21

Please refer to

manufacturers opening

sizes for recessed flashings

Installer's tip

Conservation windows

available in oak

Top tip

Traditional appearance The Roto conservation roof window

combines traditional appearance

with modern technology to provide

an energy-efficient product which

blends perfectly with natural roofing

materials. Based on the Designo R7

technology its high pivot position

provides more headroom while

minimising the extent to which the

frame protrudes into the living space.

The operating handle positioned

beneficially in the base of the frame

makes life easier for users too.

Des

ign

o R

7


Window size 5/7 5/9 5/11 6/11 7/9* 7/11* 7/14* 7/16* 9/14* 11/9 11/11 13/9 13/14


54/78 54/98 54/118 65/118 74/98 74/118 74/140 74/160 94/140 114/98 114/118 134/98 134/140



WDF R75 K AL 255,- 271,- 283,- 314,- 297,- 330,- 360,- 388,- 420,- 377,- 422,- 419,- 494,-


WDF R74 K AL 264,- 282,- 296,- 330,- 313,- 347,- 380,- 410,- 442,- 397,- 444,- 441,- 522,-


WDF R78A K AL 294,- 312,- 326,- 362,- 338,- 380,- 414,- 447,- 483,- 435,- 485,- 482,- 567,-

Single flashing for Designo R7EDR Rx 1x1 ZIE AL 55,- 56,- 57,- 60,- 61,- 64,- 65,- 66,- 67,- 63,- 72,- 68,- 74,-EDR Rx 1x1 SNO AL 55,- 56,- 57,- 60,- 61,- 64,- 65,- 66,- 67,- 63,- 72,- 68,- 74,-EDR Rx 1x1 SNH AL 60,- 63,- 64,- 67,- 68,- 69,- 71,- 72,- 74,- 70,- 76,- 75,- 80,-EDR Rx 1x1 SDS AL 55,- 56,- 57,- 60,- 61,- 64,- 65,- 66,- 67,- 63,- 72,- 68,- 74,-EDR Rx 1x1 MUN AL 64,- 67,- 68,- 71,- 72,- 73,- 75,- 76,- 78,- 74,- 80,- 79,- 84,-

Roof windowDesigno R7 in PVC

22

Designo R7 top-third pivot roof windowPVC


Usage:

– All type of room environments


– Glazing 5 / 4: UW 1,4 W/m²K

– Glazing 8A: UW 1,5 W/m²K


– Glazing 5 / 4: Ug 1,0 W/m²K

– Glazing 8A: Ug 1,1 W/m²K


– Glazing 5: 30 (-2; -5) dB

– Glazing 4: 32 (-1; -3) dB

– Glazing 8A: 38 (-2; -5) dB


Means Of Escape available as standard in certain sizes

WDF = Roof windowK = PVCEDR = Standard flashing


* MOE as standard Index of flashings: please refer to page 40 Timber effect options for interior PVC finishes (pine or golden oak): please refer to page 50 On stockVertical glazing bar: 55,-


Roof windowDesigno R7 in PVC with pre-fitted insulation collar

23

Designo R7 top-third pivot roof window with pre-fitted insulation collarPVC

Designo R7 PVC with optional pre-fitted insulation collar (1) and vapour barrier as standard (2)


Thermal transmission value UW with WD:


UW 1,3 W/m²K

Thermal insulating value Ug with WD:

– Double glazing 5 / 4: Ug 1,0 W/m²K

– Double glazing 8A: Ug 1,1 W/m²K

Peripheral thermal insulation system:

– Pre-fitted insulation collar

to reduce thermal bridges

– Vapour barrier included as standard

for high air-permeability

– Double seal in EPDM rubber to

ensure air tightness requirement1

2


Window size 5/7 5/9 5/11 6/11 7/9* 7/11* 7/14* 7/16* 9/14* 11/9 11/11 13/9 13/14


54/78 54/98 54/118 65/118 74/98 74/118 74/140 74/160 94/140 114/98 114/118 134/98 134/140



WDF R75 K WD AL 280,- 296,- 308,- 339,- 322,- 355,- 385,- 413,- 445,- 402,- 447,- 444,- 519,-


WDF R74 K WD AL 289,- 307,- 321,- 355,- 338,- 372,- 405,- 435,- 467,- 422,- 469,- 466,- 547,-


WDF R78A K WD AL 319,- 337,- 351,- 387,- 363,- 405,- 439,- 472,- 508,- 460,- 510,- 507,- 592,-

Single flashing for Designo R7 with pre-fitted insulation collar (WD)EDR Rx WD 1x1 ZIE AL 55,- 56,- 57,- 60,- 61,- 64,- 65,- 66,- 67,- 63,- 72,- 68,- 74,-EDR Rx WD 1x1 SNO AL 55,- 56,- 57,- 60,- 61,- 64,- 65,- 66,- 67,- 63,- 72,- 68,- 74,-EDR Rx WD 1x1 SNH AL 60,- 63,- 64,- 67,- 68,- 69,- 71,- 72,- 74,- 70,- 76,- 75,- 80,-EDR Rx WD 1x1 SDS AL 55,- 56,- 57,- 60,- 61,- 64,- 65,- 66,- 67,- 63,- 72,- 68,- 74,-EDR Rx WD 1x1 MUN AL 64,- 67,- 68,- 71,- 72,- 73,- 75,- 76,- 78,- 74,- 80,- 79,- 84,-

Des

ign

o R

7






Installer's tip



Top tip


Maximum headroom when window open

VentilationEasy and practical

Easy and safe cleaning through self-adjusting cleaning position

Designo R8Top-hung roof window

Easy handling: one handle at the bottom

of the sash for all functions

(opening, ventilation and cleaning)

Design: interior finish in timber or PVC

(white or 5 timber effect options

available), resistant, long-lasting

and easy to clean

Security: four point central locking system

and cleaning position locked

to secure maintenance

Convenience: ventilation via handle locking point



Panoramic unobstructed view and maximum headroom: maximum outward stepless

opening of 45° hinged at the top

of the window and at the

convenience of the user

More energy savings: vapour barrier and pre-fitted

insulation collar as standard*

for high thermal insulation


25* Roto exclusivity unique in UK

Des

ign

o R

8


Window size 5/7 5/9 7/9* 7/11* 7/14* 9/16* 11/11 *


54/78 54/98 74/98 74/118 74/140 94/160 114/118

Light area for roof windows in m2 0,19 0,25 0,41 0,51 0,63 1,01 0,90


WDF R85 H WD AL 303,- 324,- 364,- 408,- 445,- 537,- 514,-


WDF R84 H WD AL 312,- 335,- 380,- 425,- 465,- 561,- 536,-

Roto blueLine Plus (glazing 8A): double safety and thermal insulation glazing with cleaning-aided coating and sound insulation (TSG 4 / argon 16 / LSG 6)WDF R88A H WD AL 352,- 376,- 423,- 474,- 517,- 623,- 597,-

Roto blueTec (glazing 9G): triple safety and thermal insulation glazing with cleaning-aided coating (TSG 4 / argon 10 / TSG 4 / argon 10 / LSG 4)WDF R89G H WD AL 424,- 459,- 512,- 558,- 594,- 719,- 704,-

Roto blueTec Plus (glazing 9P): triple safety and thermal insulation glazing with cleaning-aided coating and sound insulation (TSG 4 / krypton 10 / TSG 4 / krypton 10 / LSG 4)WDF R89P H WD AL 467,- 505,- 564,- 614,- 654,- 791,- 775,-

Single flashing for R8 with insulation collar as standard (WD)EDR Rx WD 1x1 ZIE AL 55,- 56,- 61,- 64,- 65,- 70,- 72,-EDR Rx WD 1x1 SNO AL 55,- 56,- 61,- 64,- 65,- 70,- 72,-EDR Rx WD 1x1 SNH AL 60,- 63,- 68-, 69,- 71,- 77,- 76,-EDR Rx WD 1x1 SDS AL 55,- 56,- 61,- 64,- 65,- 70,- 72,-EDR Rx WD 1x1 MUN AL 64,- 67,- 72,- 73,- 75,- 82,- 80,-

26

Roof windowDesigno R8 in timber with insulation collar as standard


Usage: All type of room environments


– Triple glazing 9P: UW 0,82 W/m²K


UW 1,2 W/m²K


– Triple glazing 9P: Ug 0,5 W/m²K


Ug 1,0 W/m²K


– Triple glazing 9P: 37 (-2; -6) dB

– Double glazing 5 / 4: 34 (-2; -5) dB

– Double glazing 8A: 39 (-2; -5) dB

Designo R8 top-hung roof windowTimber






Installer's tip



Top tip

WDF = Roof windowH = TimberK = PVCEDR = Standard flashing

1x1 = Single flashingWD = Optional pre-fitted insulation collarAL = Aluminium anthracite-metallic (R703)* MOE as standard

Index of flashings: please refer to page 40 Timber effect options for interior PVC finishes: please refer to page 50 On stock



Window size 5/7 5/9 7/9* 7/11* 7/14* 9/16* 11/11*


54/78 54/98 74/98 74/118 74/140 94/160 114/118

Light area for roof windows in m2 0,19 0,25 0,41 0,51 0,63 1,01 0,90


WDF R85 K WD AL 335,- 358,- 405,- 454,- 495,- 612,- 576,-


WDF R84 K WD AL 344,- 369,- 421,- 471,- 515,- 636,- 598,-

Roto blueLine Plus (glazing 8A): double safety and thermal insulation glazing with cleaning-aided coating and sound insulation (TSG 4 / argon 16 / LSG 6)WDF R88A K WD AL 394,- 420,- 474,- 530,- 577,- 708,- 669,-

Roto blueTec (glazing 9G): triple safety and thermal insulation glazing with cleaning-aided coating (TSG 4 / argon 10 / TSG 4 / argon 10 / LSG 4)WDF R89G K WD AL 466,- 503,- 563,- 614,- 654,- 804,- 776,-

Roto blueTec Plus (glazing 9P): triple safety and thermal insulation glazing with cleaning-aided coating and sound insulation (TSG 4 / krypton 10 / TSG 4 / krypton 10 / LSG 4)WDF R89P K WD AL 509,- 549,- 615,- 670,- 714,- 876,- 847,-

Single flashing for R8 with insulation collar as standard (WD)EDR Rx WD 1x1 ZIE AL 55,- 56,- 61,- 64,- 65,- 70,- 72,-EDR Rx WD 1x1 SNO AL 55,- 56,- 61,- 64,- 65,- 70,- 72,-EDR Rx WD 1x1 SNH AL 60,- 63,- 68-, 69,- 71,- 77,- 76,-EDR Rx WD 1x1 SDS AL 55,- 56,- 61,- 64,- 65,- 70,- 72,-EDR Rx WD 1x1 MUN AL 64,- 67,- 72,- 73,- 75,- 82,- 80,-

Roof windowDesigno R8 in PVC with insulation collar as standard

27


Usage: All type of room environments


– Triple glazing 9P: UW 0,80 W/m²K


UW 1,2 W/m²K


– Triple glazing 9P: Ug 0,5 W/m²K


Ug 1,0 W/m²K


– Triple glazing 9P: 37 (-2; -5) dB

– Double glazing 5 / 4: 34 (-2; -5) dB

– Double glazing 8A: 38 (-2; -5) dB

Designo R8 top-hung roof windowPVC

Designo R8 top-hung roof windowTimber


35mm to either side of your

window when making your

opening sizes to allow for

insulation collar (WD)

Installer's tip



Top tip

** More details about the TÜV certification: please refer to page 69


Des

ign

o R

8



Designo R4 RotoTronicElectric roof window

Electric radio control – Operation via hand transmitter (EF)Easy operation with RotoTronic is a

matter of course. The highest level

of convenience is provided by the

electric radio-controlled version.

The radio receiver for this is already

integrated in the control system.

The remote control operation is

carried out via the five channel

remote control, which has to be

ordered separately. The electric

radio-controlled RotoTronic is ready

to go in no time: simply plug the

power plug into the socket,

programme in the hand-held

remote – finished!

Maximum conveniencefrom the very beginningPut intelligence on your roof with

RotoTronic. The roof window with

integrated drive unit and control

technology leaves nothing to be

desired when it comes to modern

living quality. The plug-in solution

includes all components for

automatic opening and closing –

‘Plug & Play’ is our motto.

The roof window is also optimally

prepared for installing accessories.

RotoTronic – life can be so easy.

Electric –Operation via switch (E)In order to meet the multiple

customer requirements for standard

electrical switch operation, we also

provide the conventional, wirebound

electric version. A commercially

available switch or a switch from

Roto is needed; this however must

be ordered separately.

A commissioning set is however

enclosed.

29

Design: interior finish in timber, exclusively

in Oak* or PVC (white or 2 timber

effect options available), resistant,

long-lasting and easy to clean

Security: rain sensor enclosed

Better conceived: Pre-wiring for coupling shutters

and blinds, electric cables supplied

with 5 m 230 V (E and EF) and 2 m

to connect the electrical box of

the window to the wall switch (E)



and cabling for the installation

of an electric blind

More light and better ventilation: perfect complement to top-third

pivot roof window Designo R7

in combination installation

More energy cost savings: vapour barrier as standard*

and optional pre-fitted insulation

collar for high thermal insulation



Des

ign

o R

4 R

oto

Tro

nic


Designo R4 RotoTronic Radio remote roof windowTimber / PVC


Concealed drive unit

Integrated control system

for exterior / interior accessories

Prewiring prepared

for interior accessories

Integrated triple radio receiver (EF)

Plug-in electric connection

with power plug

Rain sensor enclosed


– PVC and double glazing 5 / 4:

UW 1,4 W/m²K

– Timber and double glazing 5 / 4:

UW 1,5 W/m²K


Roof windowDesigno R4 RotoTronic radio remote window (EF)

You will need to order a separate remote control unit (£60), when ordering Timber/PVC RotoTronic radio remote window.

WDT = Roof window with electric radio controlK = PVCH = Timber

EDR = Standard flashing1x1 = Single flashingWD = Optional pre-fitted insulation collar

E = Electric switchEF = Electric radio remoteAL = Aluminium anthracite- metallic (R703)

Index of flashings, please refer to page 40 Timber effect options for interior PVC finishes (pine or golden oak): please refer to page 50 On stock

These roof windows are also available with pre-fitted insulation collar. Prices are as below, plus £25 per window. Information for ordering can be found on page 14.

Window size 5/7 5/9 6/11 7/9 7/11 7/14 11/11 13/9


54/78 54/98 65/118 74/98 74/118 74/140 114/118 134/98

Light area for roof windows in m2 0,24 0,31 0,50 0,48 0,59 0,72 1,00 0,96

Remote control option


WDT R45 H AL EF 473,- 480,- 514,- 525,- 528,- 553,- 605,- 616,-WDT R45 K AL EF 505,- 514,- 555,- 566,- 574,- 603,- 667,- –


WDT R44 H AL EF 482,- 491,- 530,- 541,- 545,- 573,- 627,- 638,-WDT R44 K AL EF 514,- 525,- 571,- 582,- 591,- 623,- 689,- –


WDT R48A H AL EF 530,- 538,- 576,- 589,- 592,- 620,- 679,- 691,-WDT R48A K AL EF 562,- 572,- 617,- 630,- 638,- 670,- 741,- –

Single flashing for Designo R4 RotoTronicEDR Rx 1x1 ZIE AL 55,- 56,- 60,- 61,- 64,- 65,- 72,- 68,-EDR Rx 1x1 SNO AL 55,- 56,- 60,- 61,- 64,- 65,- 72,- 68,-EDR Rx 1x1 SNH AL 60,- 63,- 67,- 68,- 69,- 71,- 76,- 75,-EDR Rx 1x1 SDS AL 55,- 56,- 60,- 61,- 64,- 65,- 72,- 68,-EDR Rx 1x1 MUN AL 64,- 67,- 71,- 72,- 73,- 75,- 80,- 79,-

30


Designo R4 RotoTronic Switch roof windowTimber / PVC


Concealed drive unit

Integrated control system

for exterior / interior accessories

Prewiring prepared

for interior accessories

Plug-in electric connection

with power plug

Rain sensor enclosed


– PVC and double glazing 5 / 4:

UW 1,4 W/m²K

– Timber and double glazing 5 / 4:

UW 1,5 W/m²K

Designo R4 RotoTronic For even more convenience under the roof

Roof windowDesigno R4 RotoTronic switch window (E)

You will need to order a separate switch control unit (£12), when ordering Timber/PVC RotoTronic switch window.

These roof windows are also available with pre-fitted insulation collar. Prices are as below, plus £25 per window. Information for ordering can be found on page 14.

Window size 5/7 5/9 6/11 7/9 7/11 7/14 11/11 13/9


54/78 54/98 65/118 74/98 74/118 74/140 114/118 134/98

Light area for roof windows in m2 0,24 0,31 0,50 0,48 0,59 0,72 1,00 0,96

Switch option


WDT R45 H AL E 433,- 440,- 474,- 485,- 488,- 513,- 565,- 576,-WDT R45 K AL E 465,- 474,- 515,- 526,- 534,- 563,- 627,- –


WDT R44 H AL E 442,- 451,- 490,- 501,- 505,- 533,- 587,- 598,-WDT R44 K AL E 474,- 485,- 531,- 542,- 551,- 583,- 649,- –


WDT R48A H AL E 490,- 498,- 536,- 549,- 552,- 580,- 639,- 651,-WDT R48A K AL E 522,- 532,- 577,- 590,- 598,- 630,- 701,- –

Single flashing for Designo R4 RotoTronicEDR Rx 1x1 ZIE AL 55,- 56,- 60,- 61,- 64,- 65,- 72,- 68,-EDR Rx 1x1 SNO AL 55,- 56,- 60,- 61,- 64,- 65,- 72,- 68,-EDR Rx 1x1 SNH AL 60,- 63,- 67,- 68,- 69,- 71,- 76,- 75,-EDR Rx 1x1 SDS AL 55,- 56,- 60,- 61,- 64,- 65,- 72,- 68,-EDR Rx 1x1 MUN AL 64,- 67,- 71,- 72,- 73,- 75,- 80,- 79,-

ETL recessed flashing available, price on application. All prices exclude VAT. Prices in £ STERLING. 31

Des

ign

o R

4 R

oto

Tro

nic


Designo WFA R1, WDA R3 and WRA R5 Special application windows

Combining roof window (WFA R1) More freedom. More convenience.

The Roto system also applies to

special windows. An angled roof

window that is unique on the

market, available in PVC or in

timber, the Designo WFA R1 allows

a maximum amount of natural light

into roof spaces and highlights the

aesthetic and architectural aspect

of the interior. With immaculate

finishes down to the finest detail,

you can choose from a multitude

of combinations.

Roof escape window (WDA R3)The Designo R3 WDA roof escape

window, in timber or PVC, 90°

side opening to the exterior, left or

right-handed opening, with a single

handle (without an exterior locking

system), ensuring locking from

a single point, and can be locked

in the ventilation position.

A gas piston ensures the window

is locked in the open position.

Smoke extraction window (WRA R5)Certified in accordance with the

EN 12101-2 European standard,

the Designo R5 WRA smoke

extraction window is a technical

innovation in safety. With an

electronic opening only using a

chain motor in the top part, the

window opens to the exterior

automatically in the event of a fire

to allow a better evacuation of

heat and smoke. The extraction

area is 1 m².

33

Sp

ecia

l ap

plic

atio

n w

ind

ow

s


Roof windowDesigno R1 Combining roof window

Designo WFA R1 Combining roof windowTimber / PVC


Interior PVC finish: exterior finish

available in white PVC or now in

anthracite-metallic aluminium (R703)

Interior timber finish:

anthracite-metallic aluminium

exterior finish (R703)

Can be combined with all current

Roto roof window models without or

with pre-fitted insulation collar (WD)

Factory-fitted rain gutter


– Timber: UW 1,3 W/m²K

– PVC: UW 1,1 W/m²K

Prices on application

Usage: facade window

34


Sp

ecia

l ap

plic

atio

n w

ind

ow

s


Roof windowDesigno R3 side-hung emergency escape

Designo WDA R3 Side-hung emergency escape Timber / PVC


One-handled operation

Left or right handed opening

Anti-slam protection

For heated living areas

Pre-fitted insulation collar optional


– PVC with WD: UW 1,3 W/m²K

– PVC without WD: UW 1,4 W/m²K

– Timber with WD: UW 1,3 W/m²K

– Timber without WD: UW 1,5 W/m²K

Interior view: lateral opening from the right side.Please indicate by ordering requested lateral opening from interior view.Usage: from 20° to 85° roof slope

Window size 5/9* 6/11*


54/98 65/118

Light area for roof windows in m2 0,31 0,49


WDA R35 H AL 320,- 428,-WDA R35 H WD AL 345,- 453,-WDA R35 K AL 365,- 469,-WDA R35 K WD AL 390,- 494,-

Single flashing for Designo R3EDR Rx 1x1 ZIE AL 56,- 60,-EDR Rx 1x1 SNO AL 56,- 60,-

Single flashing for Designo R3 with insulation collar (WD)

EDR Rx WD 1x1 ZIE AL 56,- 60,-EDR Rx WD 1x1 SNO AL 56,- 60,-

WDA = Side-hung emergency escape K = PVCH = TimberEDR = Standard flashing1x1 = Single flashingWD = Pre-fitted insulation collarAL = Aluminium anthracite-metallic (R703)

Index of flashings: please refer to page 40 Timber effect options for interior PVC finishes: please refer to page 50

36


Roof windowDesigno R5 smoke extraction roof window

Designo WRA R5 Smoke extraction roof windowTimber / PVC


One handled operation

Left or right handed opening

Anti-slam protection

For heated living areas

Pre-fitted insulation collar optional


– Timber with WD: UW 1,3 W/m²K

– Timber without WD: UW 1,5 W/m²K

– PVC with WD: UW 1,3 W/m²K

– PVC without WD: UW 1,4 W/m²K

Usage: from 20° to 45° according to aerodynamic opening area from 20° to 65° according to geometric opening area

Window size 11/11 11/14


114/118 114/140

Light area for roof windows in m2 1,00 1,22


WRA R58A H WD AL 1160,- 1209,-WRA R58A K WD AL 1050,- 1090,-

Single flashing for Designo R5EDR Rx WD 1x1 ZIE AL 72,- 75,-EDR Rx WD 1x1 SNO AL 72,- 75,-

RWA control packageZEL RWA SPA OR with RWA button ORANGE 691,-ZEL RWA SPA RE with RWA button RED 691,-ZEL RWA SPA YE with RWA button YELLOW 691,-

WRA = Roof windowRWA = Control package H = TimberK = PVCEDR = Standard flashing 1x1 = Single flashingWD = Pre-fitted insulation collarAL = Aluminium anthracite-metallic (R703)

Index of flashings: please refer to page 40 Timber effect options for interior PVC finishes: please refer to page 50

RWA control package in connection with Designo WRA

Electric control device (RWA control centre

4503-T incl. box) included emergency power

supply and ventilation operations

Electric surface mounted manual mechanism

(RWA button)

1 optical fire detector

1 flush-mounted ventilation button

Output current: 3A (1 x WRA 11/...

can be connected)

All prices exclude VAT. Prices in £ STERLING. 37

Sp

ecia

l ap

plic

atio

n w

ind

ow

s



Adaptable to a multitude

of roof types

Wide choice of standard

or optional exterior finishes

Connection components allowing

a multitude of combinations

Long-term protection against

climatic conditions

System and precision

Our large choice of roof connections

is the result of a system that is both

sophisticated and flexible. There are

connections for individual windows,

for combinations of several roof

windows, for recessed windows,

for flat roof installation frames or

combining roof windows. We attach

the greatest importance to the

thermal insulation and waterproofing

of our systems, and we also offer a

connection kit to the roof boarding

screen.

Modular connections

All configurations are possible with

Roto modular connection systems.

Do not hesitate to consult us, with

the greatest of pleasure we will

be able to design your project with

you, to create the most classic or

the most original roof windows

fitted side-by-side or one above

the other.

FlashingsStandard and modular flashings

39

Flas

hin

gs


FlashingsSash covers

Roof covering

ZIE

SDS

SNO

SNH

MUN

ZIE Pantiles or profiled tilesAimed for roof pitch‘s from 15° to 90°Flashing for installing one roof windowin flat or profiled roofing materialsNot for interlocking slateFor tile materials from 15 to 45 mm height

SDS Interlocking slateAimed at roof ptich‘s from 22.5° to 90°Flashing for installing one roof window into interlocking slate

SNO SlateAimed for roof pitch’s from 15° to 90°Flashing for installing one roof windowinto slate up to 15 mm thicknessNot for interlocking slateCoupled version also available

SNH Plain tilesAimed for roof pitch’s from 15° to 90°Flashing for installing one roof windowin plain tiles (max. length 270 mm)Maximum thickness of 15 mm

MUN Pantiles or hi-profiled tilesAimed for roof pitch’s from 15° to 90°Flashing for installing one roof window in flat or profiled roofing material up to 120 mm in profileFor tile materials above 45 mm height

Standard

Anthracite-metallic

Upon request

Copper

Upon request

Titanium e.g. RAL red Prices for CU/TV/RAL on application.

Upon request

FlashingsSash covers and roof covering

Please refer to the tile manufacturers fixing specifications for full installation details

EDR: Standard flashing Minimum roof pitch 15°

ETL: Recessed flashingMinimum roof pitch 35° without WD (R4/R7)Minimum roof pitch 30° with WD (R4/R7/R8)

EFA: Flashing for combining roof windowMinimum roof pitch 15°

Flashings

40

To ensure air

permeability all

flashings have

to be installed

under the double

EDPM rubber seal

Installer's tip


Modular flashings

a) EDR Rx O + U Top & bottom single flashingb) Water drain channel (except for metal roofing)c) EDR Rx SEB U Bottom flashing side-partsd) Mounting clips

For better identification purposes, the boxes’ labels include the corresponding code letters (in circles).

Single flashing (1x1)

Multiple ‘stacked’ flashings (1x2)

Multiple flashings (3x2)

EDR Rx 1x1 single flashing, consisting of:A

EDR Rx 1x1 Single flashing (incl. water drain channel, except for metal roofing)

EDR Rx MEB Flashing central part

EDR Rx SEB O Top flashing side-parts

EDR Rx 1x2 single flashing, consisting of:

A

F

K

EDR Rx O + U L Left-hand top & bottom flashing (incl. water drain channel, except for metal roofing)

EDR Rx O + U M Centre top & bottom flashing (incl. water drain channel, except for metal roofing)

EDR Rx O + U R Right-hand top & bottom flashing (incl. water drain channel, except for metal roofing)

EDR Rx UBL U Bottom U-gutter flashing incl. flashing shrouds

EDR Rx MEB L Left centre-part flashing

EDR Rx MEB M Centre centre-part flashing

EDR Rx MEB R Right centre-part flashing

EDR Rx UBL O Top U-gutter flashing incl. flashing shrouds

EDR Rx SEB O Top flashing side-parts

EDR Rx SEB U Bottom flashing side-parts

EDR Rx 3x2 Multiple flashing, consisting of:

B

C

D

E

G

H

I

J

K

L

FlashingsModular flashings

Flashings

41

Flas

hin

gs



Side-by-side, stacked or quad flashings


Window combinations enable any

desired width with window heights

up to 1.80 m with a bottom-

mounted handle for matching

operating convenience

Optimal space utilisation and

light yield

Perfect interior appearance

Side-by-side or combination

installations provide more light:

for example two or three roof

windows side by side create the

visual impression of a continuous

glazed area

Prices for further combinations on application. On stock: restrictions apply to stock items please contact sales office

Window size 5/7 5/9 5/11 6/11 7/9 7/11 7/14 7/16 9/14 11/9 11/11 13/9 13/14


54/78 54/98 54/118 65/118 74/98 74/118 74/140 74/160 94/140 114/98 114/118 134/98 134/140

Side-by-sideEDR 2x1 ZIE AL 141,- 142,- 143,- 143,- 144,- 169,- 171,- 173,- 177,- 175,- 177,- 181,- 195,-EDR 2x1 SNO AL 141,- 142,- 143,- 143,- 144,- 169,- 171,- 173,- 177,- 175,- 177,- 181,- 195,-EDR 2x1 SNH AL 154,- 157,- 159,- 167,- 170,- 173,- 176,- 178,- 194,- 190,- 194,- 192,- 206,-EDR 2x1 SDS AL 141,- 142,- 143,- 143,- 144,- 169,- 171,- 173,- 177,- 175,- 177,- 181,- 195,-EDR 2x1 MUN AL 165,- 167,- 170,- 178,- 181,- 184,- 186,- 189,- 205,- 195,- 205,- 197,- 211,-

StackedEDR 1x2 ZIE AL 141,- 142,- 143,- 143,- 144,- 169,- 171,- 173,- 177,- 175,- 177,- 181,- 195,-EDR 1x2 SNO AL 141,- 142,- 143,- 143,- 144,- 169,- 171,- 173,- 177,- 175,- 177,- 181,- 195,-EDR 1x2 SNH AL 154,- 157,- 159,- 167,- 170,- 173,- 176,- 178,- 194,- 190,- 194,- 192,- 206,-EDR 1x2 SDS AL 141,- 142,- 143,- 143,- 144,- 169,- 171,- 173,- 177,- 175,- 177,- 181,- 195,-EDR 1x2 MUN AL 165,- 167,- 170,- 178,- 181,- 184,- 186,- 189,- 205,- 195,- 205,- 197,- 211,-

QuadEDR 2x2 ZIE AL 298,- 310,- 317- 327,- 331,- 345,- 355,- 367,- 382,- 378,- 382,- 399,- 382,-EDR 2x2 SNO AL 298,- 310,- 317,- 327,- 331,- 345,- 355,- 367,- 382,- 378,- 382,- 399,- 382,-EDR 2x2 SNH AL 331,- 338,- 342,- 359,- 366,- 372,- 378,- 383,- 417,- 410,- 417,- 414,- 444,-EDR 2x2 SDS AL 298,- 310,- 317,- 327,- 331,- 345,- 355,- 367,- 382,- 378,- 382,- 399,- 382,-EDR 2x2 MUN AL 349,- 365,- 374,- 408,- 417,- 376,- 387,- 401,- 443,- 422,- 443,- 434,- 465,-

42



Window size 5/7 5/9 5/11 6/11 7/9 7/11 7/14 7/16 9/14 11/9 11/11 13/9 13/14


54/78 54/98 54/118 65/118 74/98 74/118 74/140 74/160 94/140 114/98 114/118 134/98 134/140

Side-by-sideEDR 2x1 ZIE AL 141,- 142,- 143,- 143,- 144,- 169,- 171,- 173,- 177,- 175,- 177,- 181,- 195,-EDR 2x1 SNO AL 141,- 142,- 143,- 143,- 144,- 169,- 171,- 173,- 177,- 175,- 177,- 181,- 195,-EDR 2x1 SNH AL 154,- 157,- 159,- 167,- 170,- 173,- 176,- 178,- 194,- 190,- 194,- 192,- 206,-EDR 2x1 SDS AL 141,- 142,- 143,- 143,- 144,- 169,- 171,- 173,- 177,- 175,- 177,- 181,- 195,-EDR 2x1 MUN AL 165,- 167,- 170,- 178,- 181,- 184,- 186,- 189,- 205,- 195,- 205,- 197,- 211,-

StackedEDR 1x2 ZIE AL 141,- 142,- 143,- 143,- 144,- 169,- 171,- 173,- 177,- 175,- 177,- 181,- 195,-EDR 1x2 SNO AL 141,- 142,- 143,- 143,- 144,- 169,- 171,- 173,- 177,- 175,- 177,- 181,- 195,-EDR 1x2 SNH AL 154,- 157,- 159,- 167,- 170,- 173,- 176,- 178,- 194,- 190,- 194,- 192,- 206,-EDR 1x2 SDS AL 141,- 142,- 143,- 143,- 144,- 169,- 171,- 173,- 177,- 175,- 177,- 181,- 195,-EDR 1x2 MUN AL 165,- 167,- 170,- 178,- 181,- 184,- 186,- 189,- 205,- 195,- 205,- 197,- 211,-

QuadEDR 2x2 ZIE AL 298,- 310,- 317- 327,- 331,- 345,- 355,- 367,- 382,- 378,- 382,- 399,- 382,-EDR 2x2 SNO AL 298,- 310,- 317,- 327,- 331,- 345,- 355,- 367,- 382,- 378,- 382,- 399,- 382,-EDR 2x2 SNH AL 331,- 338,- 342,- 359,- 366,- 372,- 378,- 383,- 417,- 410,- 417,- 414,- 444,-EDR 2x2 SDS AL 298,- 310,- 317,- 327,- 331,- 345,- 355,- 367,- 382,- 378,- 382,- 399,- 382,-EDR 2x2 MUN AL 349,- 365,- 374,- 408,- 417,- 376,- 387,- 401,- 443,- 422,- 443,- 434,- 465,-

Please ask the Roto technician about the achievable

gaps between the windows

43All prices exclude VAT. Prices in £ STERLING.

Flas

hin

gs


Perfect flat roof illuminationConvenient Roto roof windows in

flat roofs? The flat roof installation

frame makes this possible.

Compared to conventional light

domes these open up excellent

perspectives: ranging from an

unobstructed view out, right up to

optimal ventilation, e.g. by means

of RotoTronic roof windows with

integrated electrical engineering.

Furthermore you can make use

of the whole range of Roto sun

screening accessories. The robust,

thermally insulated flat roof

installation frame is installed rapidly

and easily. The aluminium frame

upon which the window sits is

included. Only the roof connection

work must be carried out on site.

Designo installation frame for flat roofsEBR FLD


Robust, thermally insulated

installation frame for flat roofs

Optimal light transmittance

Large tolerance zone suitable

for prevalent roof openings

Diverse shading/sun screening

possibilities

Good ventilation possibility

Roof window not included

Usage: from 0° to 30° roof slope

EBR = Installation frameFLD = Flat roofWD = Pre-fitted insulation collar 1x1 = Single installation

FlashingsDesigno EBR FLD installation frame for flat roofs

Window size 5/7 5/9 5/11 7/9 7/11 7/14 9/16 11/11 13/14Width in cm 48 48 48 68 68 68 88 108 128

Window frame external dimension in cm Height (min/max)

75/95 95/120 115/135 95/120 115/135 135/155 155/180 115/135 135/155

Light area in m2 0,19 0,25 0,32 0,41 0,51 0,63 1,01 0,90 1,14

Single flashingEBR Rx WD 1x1 FLD AL 281,- 300,- 324,- 310,- 337,- 343,- 404,- 393,- 393,-

AL = Aluminium anthracite-metallic (R703)

On stockFor further details regarding pre-fitted insulation collar, please refer to page 19.

44

Roof windows with


collar (WD) must be

used

Installer's tip


FlashingsDesigno ERA wedge-shaped frame

Designo wedge-shaped installation frameERA Rx 1x1


Frame adapted for Designo roof

windows with pre-fitted insulation

collar (WD)

Stable thermally insulated

installation frame

All required elements

for installation included

More living space

for low roof sloping

Multiple installations

available on request

Usage: from 15°

Thermally insulated installation frame Installation

Window size 5/7 5/9 7/9 7/11


54/78 54/98 74/98 74/118

Light area in m2 0,19 0,25 0,41 0,51

Single flashingERA Rx WD 1x1 ZIE AL 396,- 410,- 419,- 486,-

ERA = Wedge-shaped installation frameWD = Pre-fitted insulation collar 1x1 = Single installationAL = Aluminium anthracite-metallic (R703)

Index of flashings: please refer to page 40.


Flas

hin

gs


Roto external connection kitFor greater tightness

FlashingsExternal connection kit


Water tight collar

Simple and quick assembling

due to lateral corner profiles

For all dimensions applicable

Includes4 lateral corner profiles

4 adhesive corners for inside

1 perforated adhesive foil roll

1 transverse drainage gutter

is enclosed with each flashing

EZB AAS 34,-

Cut the sarking membrane and keep some material on each side for the plates.

Install the lateral corner profiles and seal the plates with the adhesive foil roll enclosed.

Finish and seal the lateral profiles and adhesive corners from inside enclosed.

Application areaTo ensure a water tight seal between the roof window with pre-fitted

insulation collar.


Flas

hin

gs


AccessoriesThe Roto modular system

Brightness and comfortguaranteed in all your roomsControlled light, regulation of the

ambient temperature, optimum

perspective… Roto exterior sun

protection or interior decoration

equipment allow you to give

meticulous care to your living space

and well-being. With Roto you

have the choice from a multitude

of solutions and models: roller

shutters, exterior sun blinds,

interior PVC finish, interior blinds,

black-out blinds, venetian or pleated

blinds, manually or electrically

controlled.

Accessories to bring comfort or to give convenienceInstalled at the same time as the

roof window, or added later

depending on the needs of the

user, Roto exterior and interior

accessories are designed to be

really multipurpose so as to

always provide more convenience.

Choose the right accessory to enhance your space When you choose a roof window,

you think of the practical aspects

first – generous and bright spaces,

functionality and technical

specifications. However, of all the

windows and door frames of a

house, it is the roof window that

is the most exposed to all types

of attack (heat, rain, ice, forced

entry). Paradoxically, it is the least

protected. This is why only a good

choice of exterior and interior

accessories will give you the

window that is most suitable for

the needs of the end user.


No limit to your imagination:

accessories that perfectly

complement each other, and are

practical so as to meet the needs

of the user, according to the way

they want, and how they want them

Design and fitting of accessories

in a way that retains all their

functionalities in all the window’s

positions (open, ventilation and

cleaning)

Gives value to converted roof spaces

Exterior solar protection regarding

controlling natural light and rises

in temperature

Personal touch due to a wide

palette of patterns and colours

Efficient protection against heat,

cold and burglary (roller shutter)

Simple and fast fitting

from the interior

49

Acc

esso

ries


Timber effect optionsfor interior PVC finishes

KK = PVC pine effect option

KM = PVC dark oak effect option

KS = PVC mahogany effect option

KN = PVC walnut effect option

KG = PVC golden oak effect option

Timber effect options for interior PVC finishes

AccessoriesTimber effect options for interior PVC finishes

Window size 5/7 5/9 5/11 6/11 7/9 7/11 7/14 7/16 9/14 11/9 11/11 13/9 13/14


54/78 54/98 54/118 65/118 74/98 74/118 74/140 74/160 94/140 114/98 114/118 134/98 134/140

Timber effect options

Designo R4/R7KG, KK 52,- 52,- 57,- 57,- 57,- 61,- 61,- 61,- 61,- 61,- 61,- 61,- 68,-

Window size 5/7 5/9 5/11 7/9 7/11 7/14 9/16 11/11


54/78 54/98 54/118 74/98 74/118 74/140 94/160 114/118

Timber effect options

Designo R8KG, KN, KS, KM, KK 52,- 52,- 57,- 57,- 61,- 61,- 68,- 61,-

Roto Product brochure 2013 51All prices exclude VAT. Prices in £ STERLING.

AccessoriesInner lining

PVC inner liningSuitable for all roof windows


Perfect aesthetics

No external screws

Suitable for all interior configurations

Simple installation

Low maintenance PVC profiles

Window size 5/... 6/... 7/... 9/... 11/... 13/...

External window frame in mm 540/... 650/... 740/... 940/... 1140/... 1340/...

ZIN BRE 400 52,- 59,- 64,- 77,- 88,- 101,-

Window size .../7 .../9 .../11 .../14 .../16

External window frame in mm .../780 .../980 .../1180 .../1400 .../1600

ZIN LAE 400 84,- 90,- 100,- 107,- 113,-

Acc

esso

ries


AccessoriesExterior sun screening

Exterior sun screeningExternal blinds and roller shutter

Protects from heat, protects from cold: Effective heat protection is achieved,

when the heat radiation is reflected,

before it reaches the window pane.

Accessories positioned on the roof

window’s exterior are for this reason

the first choice. The Roto electrical

exterior roller shutter fulfils

particularly high requirements.

It doesn’t just control brightness

and darkness. It also creates a

comfortable living atmosphere

by supporting and increasing the

effects of the Roto safety insulating

glazing – an ideal supplement to

Roto roof windows.

Heat protection without darkening:If not light, but rather heat needs to

be deflected, it would be favourable

to use the Roto electrical external

awning. Approximately 95% of the

heat radiation can be deflected this

way, before it reaches the window

pane. A high level of efficiency and

air circulation between the textile

and the window pane provide for

a pleasant room climate – ideal

for example when working in an

attic office. The ventilation is no

problem: The external awning works

in every sash position without any

restrictions.

Sun screening:

Effective thermal insulation

contributes considerably to living

comfort during the summer months.

The Roto ‘Screen’ exterior blind with

its plastic-coated glass fibre fabric,

ensures that approximately 70%

of the heat radiation doesn’t reach

the window pane in the first place.

Even if the blind has been pulled

down, the roof window’s functions

remain fully functional without any

restrictions. Combining exterior

blinds with interior accessories is to

be recommended. Heat protection

together with a darkening blind

represent for example an effective

package.

Prices on application

External awningThe benefits at a glance

Perfect heat protection, optimally

matched to the roof windows

Fast and uncomplicated

installation from the inside

Fully operational when the

window is open

Exterior roller shutterThe benefits at a glance

Total operativeness

when the window is open

Optimal sun and heat protection

Electrical drive unit as standard

Fast and uncomplicated

installation from the inside

‘Screen’ exterior blindThe benefits at a glance

Sun and heat protection,

high-quality insulation

Protects against light and glare

Fully operational

when the window is open

‘Screen’ exterior blindExternal awningExterior roller shutter

52


AccessoriesExterior sun screening

Acc

esso

ries


77,-

77,-

77,-

77,-

Venetian blind

AccessoriesInterior blinds

Venetian blinds


Effective sun screening

while providing a bright living

environment

Manual adjustement

of the louvres

18 louvre colours available

Easy installation

Perfectly integrated

in the window

Profiles available in white

or anodised aluminium

Particularly suitable

for bathrooms or kitchens

Control light transmittance individually

W = Rail colour whiteAL = Rail colour natural aluminiumA-…/ B-... = Colours A-... / B-...

ZJA = Venetian blindM = ManualR4 / R7 / R8 = Roof windows R4 / R7 / R873 = Roof windows Series 73

Window size

Window frame external dimension in cm (W x H)

5/7

54/78

5/9

54/98

5/11 6/11

54/118 65/118

7/9 7/11

74/98 74/118

7/14 7/16

74/140 74/160

9/11

94/118

9/14

94/140

ZJA M R4/R7 and 73 W/AL A-...

ZJA M R8 W/AL A-...

82,-

82,-

89,-

89,-

94,-

94,-

103,-

103,-

108,-

108,-

88,-

88,-

88,-

88,-

100,-

100,-

105,-

105,-

82,-

82,-

89,-

89,-

94,-

94,-

103,-

103,-

108,-

108,-

88,-

88,-

88,-

88,-

100,-

100,-

105,-

105,-

ZJA

Manual

Uni translucent (A-)

Uni translucent (A-)

Designo R4/R7 and WDF 73

Designo R8

ZJA M R4/R7 and 73 W/AL B-...

ZJA M R8 W/AL B-...

Uni special (B-)

Uni special (B-)

Roto Product brochure 2013 55Price for opening pole can be found on page 65. All prices exclude VAT. Prices in £ STERLING.

Venetian blind


Colours available

Note: pattern illustrations are not true to scale. Slight colour variations can occur due to production/technical reasons.

Note: venetian blind available with white side rails (W) for PVC roof windows or anodised aluminium (AL) for timber roof windows ; please specify when ordering your chosen blind: e.g. ZJA M R7 W A-... or ZJA M 73 AL B-...

A-609

B-467

B-645

B-581

B-800

A-620

B-476

B-583

B-665

B-840

B-611

B-678

B-619

B-571

B-700

B-632

B-575

B-703Silver undersideperforated

Uni translucent

Uni special

13/911/1111/9

134/98114/118114/98

13/14

134/140

105,-

105,-

105,-103,-

105,-103,-

125,-

125,-

105,-

105,-

105,-103,-

105,-103,-

125,-

125,-

ZJA

Manual

Acc

esso

ries


Pleated blind

56


Pleated blinds


Pleasant living ambience

during the daytime

Manual pull-bar steplessly

guided in lateral tracks

2 fabric qualities,

14 patterns and colours

Light, decorative design and atmosphere

ZFA

Window size


5/7

54/78

5/9 5/11 6/11

54/98 54/118 65/118

7/9 7/11

74/98 74/118

7/14 7/16 9/11

74/140 74/160 94/118

9/14

94/140

74,-

74,-

97,-

97,-

97,-

97,-

121,-

121,-

131,-

131,-

132,-

132,-

Manual

ZFA M R4/R7 and 73 W/AL A-.../B…

ZFA M R8 W/AL A-.../B…

Uni translucent (A-) or pearly lustre coating translucent (B-)

Uni translucent (A-) or pearly lustre coating translucent (B-)


Designo R8

80,-

80,-

110,-

110,-

100,-

100,-

133,-

133,-

W = Rail colour whiteAL = Rail colour natural aluminiumA-…/ B-... = Colours A-... / B-...

ZFA = Pleated blindM = ManualR4 / R7 / R8 = Roof windows R4 / R7 / R873 = Roof windows Series 73


Pleated blind

57Additional special insect screen also available on application.Price for opening pole can be found on page 65. All prices exclude VAT. Prices in £ STERLING.

Note: pleated blind available with white side rails (W) for PVC roof windows or anodised aluminium (AL) for timber roof windows ; please specify when ordering your chosen blind: e.g. ZFA M R4 W A- ... or ZFA M 73 AL B-...


A-110

A-115

A-111

A-116

A-112 A-113 A-114

Uni translucent

B-120

B-125

B-121

B-126

B-122 B-123 B-124

Pearly lustre coating translucent*

Colours available


ZFA

* Pearly lustre coating: the fabrics have a translucent

reflective coated backing.

This brings about a high level

of solar reflection due to the

pearly lustre pigments and is

resistant to alkaline cleaning

agents, insect dirt and

condensation. The fabric

colours are not changed

by the coating.

11/1111/9

114/118114/98

13/9

134/98

13/14

134/140

146,-

146,-

133,-

133,-

151,-

151,-

Manual

142,-

142,-

Acc

esso

ries


81,-

58


Exclusive and Standard roller blinds


Easy installation due to

the pre-assembled casing

Protection against glaring sunlight

Provides privacy

Fabric printed on one side,

waterproof, lightfast and

can be wiped with a damp cloth

2 fabric qualities, 24 patterns

and colours



Pull bar on ‘Standard’ roller blind

can be fixed in 3 positions

Additional convenience for

‘Exclusive’ roller blind: pull bar

steplessly guided in lateral lacks

Practical both on application and design

ZRE / ZRS

W = Rail colour whiteAL = Rail colour natural aluminiumB-…/ C-... = Colours B-... / C-...

ZRE = Exclusive roller blindZRS = Standard roller blindM = Manual

R4 / R7 / R8 = Roof windows R4 / R7 / R873 = Roof windows Series 73

Roller blind

Window size


5/7

54/78

5/9 5/11 6/11

54/98 54/118 65/118

7/9 7/11

74/98 74/118

7/14 7/16 9/11

74/140 74/160 94/118

9/14

94/140

56,-

56,-

71,-

71,-

61,-

61,-

74,-

74,-

80,-

80,-

84,-

84,-

Manual exclusive roller blind

ZRE M R4/R7 and 73 W/AL B-.../C…

ZRE M R8 W/AL B-.../C…

Pearly lustre coating translucent (B-) or Uni translucent (C-)



Designo R8

58,-

58,-

73,-

73,-

63,-

63,-

81,-

38,-

38,-

50,-

50,-

41,-

41,-

52,-

52,-

56,-

56,-

58,-

58,-

Manual standard roller blind

ZRS M R4/R7 and 73 W/AL B-.../C…

ZRS M R8 W/AL B-.../C…




Designo R8

40,-

40,-

51,-

51,-

42,-

42,-

56,-

56,-

Roto Product brochure 2013 59Price for opening pole can be found on page 63. All prices exclude VAT. Prices in £ STERLING.


Note: roller blind available with white side rails (W) for PVC roof windows or anodised aluminium (AL) for timber roof windows ; please specify when ordering your chosen blind: e.g. ZRE M R7 W B- ... or ZRS M 73 AL C-...

C-244

C-249

C-240

C-245

C-250

C-241

C-246

C-251

C-242

C-247

C-243

C-248

Uni translucent

B-220

B-225

B-230

B-221

B-226 B-227 B-228 B-229

B-222 B-223 B-224

B-231

Pearly lustre coating translucent*


Colours availableZRE / ZRS

W = Rail colour whiteAL = Rail colour natural aluminiumB-…/ C-... = Colours B-... / C-...

* Pearly lustre coating: the fabrics have a translucent

reflective coated backing.

This brings about a high level

of solar reflection due to the

pearly lustre pigments and is

resistant to alkaline cleaning

agents, insect dirt and

condensation. The fabric

colours are not changed

by the coating.

Roller blind

11/1111/9

114/118114/98

13/9

134/98

13/14

134/140

96,-

96,-

88,-

88,-

101,-

101,-

Manual exclusive roller blind

96,-

96,-

65,-

65,-

60,-

60,-

68,-

68,-

Manual standard roller blind

65,-

65,-

Acc

esso

ries



60

80,- 89,- 95,- 109,- 109,-85,- 95,- 99,- 115,- 116,-

80,- 89,- 95,- 109,- 109,-


Blackout roller blinds


Blackout without lateral light

transmittance*

Pull bar steplessly guided

in lateral tracks

The close fitting design limits

the air exchange between roller

blind fabric and the glass pane

Limits temperatures increase

when combined with ‘Screen’

exterior blind

2 fabric qualities, 25 patterns

and colours



Easy installation due to

the preassembled casing

Turn day into night in a flash

ZRV

Window size


5/7

54/78

5/9

54/98

5/11 6/11

54/118 65/118

7/9 7/11

74/98 74/118

7/14 7/16

74/140 74/160

9/11

94/118

9/14

94/140

Electric blackout roller blind: A power transformer and a switch control or a power transformer coupled to a radio receiver and a remote control are required for the installation of an electric accessory on a non-motorised roof window. They should be ordered separately (please refer to page 64 "Other accessories")

ZRV M R4/R7 and 73 W/AL D-.../E-…Patterns translucent (D-) or Uni translucent (E-)

Patterns translucent (D-) or Uni translucent (E-)


Designo R8

ZRV M R8 W/AL D-.../E-…

85,- 95,- 99,- 115,- 116,-

246,- 267,- 273,- 277,- 291,-252,- 273,- 275,- 289,- 294,-

246,- 267,- 273,- 277,- 291,-ZRV E R4/R7 and 73 W/AL D-.../E-…Patterns translucent (D-) or Uni translucent (E-)

Patterns translucent (D-) or Uni translucent (E-)


Designo R8

ZRV E R8 W/AL D-.../E-…

252,- 273,- 275,- 289,- 294,-

Manual blackout roller blind

W = Rail colour whiteAL = Rail colour natural aluminiumD-…/ E-... = Colours D-... / E-...

ZRV = Blackout roller blindM = ManualE = Electric

R4 / R7 / R8 = Roof windows R4 / R7 / R873 = Roof windows Series 73

* Not absolute darkness in the physical sense. In summer not sufficient as solar protection, recommended in conjunction with an exterior blind.



61Price for opening pole can be found on page 63. All prices exclude VAT. Prices in £ STERLING.

109,- 118,-117,- 128,-

109,- 118,-


Note: blackout roller blind available with white side rails (W) for PVC roof windows or anodised aluminium (AL) for timber roof windows ; please specify when ordering your chosen blind: e.g. ZRV M R7 W D- ... or ZRV M 73 AL E-...

D-260

D-267

E-284* E-285* E-286*

E-291* E-293

D-261

D-268

D-262 D-263 D-264 D-265 D-266

E-280*

E-287* E-294

E-281*

E-288*

E-295

E-282*

E-289*

E-283*

E-290*

Patterns translucent, no lateral light transmittance

Uni translucent, no lateral light transmittance

Colours available

* A special foil is woven into the fabric of these patterns. This is the basis for the important performance features such as the high degree of reflection and the electro-magnetic ray shielding. The dotted appearance, especially on bright fabrics, is a result of the manufacturing process and is not a sign of defective material.


ZRV

13/9

134/98

13/14

134/140

Electric blackout roller blind: A power transformer and a switch control or a power transformer coupled to a radio receiver and a remote control are required for the installation of an electric accessory on a non-motorised roof window. They should be ordered separately (please refer to page 64 "Other accessories")

117,- 128,-

283,- 295,-295,- 301,-

293,- 295,-295,- 301,-

Manual blackout roller blind

W = Rail colour whiteAL = Rail colour natural aluminiumD-…/ E-... = Colours D-... / E-...

Remote control unit or switch control

for electric blind please refer to page 64

Installer's tip

11/1111/9

114/118114/98

Acc

esso

ries


AccessoriesOther accessories

Other accessories

ZEL STG HS 5: 5 channels

Price: 60,-

ZEL STG HS 10: 10 channels

Price: 99,-

Remote control unit Product description

The highest level of convenience is provided by the electric radio-controlled versionThe radio receiver for this is already integrated in the control systemThe remote control operation is carried out via the five or ten channel remote control, which has to be ordered separately

ZEL STG WS 1

Price: 49,-

Wireless switch control Product description

Radio frequency interference-insensitiveLong range Separate buttons for up / stop / down command Simple installation Between programmable position Individual, group and central control

ZUB GRF ASB R8 White

ZUB GRF ASB R8 Metallic

Price: 28,-

Lockable handle Designo R8 Product description

Lockable handle available for Designo R8 in timber and PVC (please indicate the roof window's name plate when ordering)

ZEL STG S

Price: 12,-

Switch control Product description

In order to meet the multiple customer requirements for standard electrical switch operation, we also provide the conventional, wirebound electric versionA commercially available switch or a switch from Roto is needed; this however must be ordered separatelyA commissioning set is however enclosed

62


AccessoriesOther accessories

Other accessories

ZUB TFB L 1700 – 3000Length: 1700 – 3000 mm

Price: 44,-

Opening pole

Rx 1100 KPL FR(window width 5, 7 and 9)

Rx 1530 KPL FR(window width 11 and 13)

Only for R4 and R7

Price: 55,-

ZUB TFB L 1170 – 1920Length: 1170 – 1920 mm

Price: 34,-

Vertical glazing bar Product description

Vertical bar to fix to the Designo roof windowto combine our current know-how in terms of thermal insulation and convenience with a traditional appearance

Opening pole


ZUB GRF ASB R7/R4White (PVC)ZUB GRF ASB R7/R4White aluminium (Timber)

Price: 24,-

Lockable handle Designo R4/R7 and WDA R3 Product description

Lockable handle available for Designo R4, R7 and WDA R3 in timber and PVC (please indicate the roof window's name plate when ordering)

Acc

esso

ries


InformationInstallation drawing and RotoCampus

Installation drawing Designo R7

RotoCampus

66

67

Info

rmat

ion


InformationInstallation drawing

Installation recommandations Scale 1:5

Please note: this drawing is intended as a recommended example and must be adapted as appropriate to suit local conditions. Roofing felt and film connections must be executed in accordance with local codes of practice. We reserve the right to make technical changes.

Roto Designo R7Single installation into a tiled roof

66 Subject to change

Roto Product brochure 2013 67Subject to change

Practical Trainings at RotoCampus UK‘Come and see what makes Roto completely different!’

experience and product knowledge,

and gain hands-on experience of

installing Roto products. The training

groups are kept small with the focus

being on real tuition for individuals

rather than across the board

lectures. The RotoCampus UK is

situated at our premises in Rugby,

located approximately 30 miles from

Birmingham, close to Junction 1

of the M6.

Training is normally completed in

just one day and both individuals

and teams are welcome.

For further information about

RotoCampus training dates

do not hesitate to contact our

team at Rugby on:

01788 558600

or [email protected]


High-quality products for energy

efficient construction and

convenience at the inclinational roof

Customer support by our

experienced sales technicians

Installation demonstration –

Improve your knowledge

by learning from experts

Training is completed

in just one day

Robust details encouraging

best practice – from professionals

for professionals

RotoCampus UK Expertise under one roofThe RotoCampus UK is designed

to develop the expertise and skills

of those professionals who are

working with Roto products.

This includes merchants, installers,

specifiers and architects. Through

practical training, a course at the

Roto Campus will allow you to gain

in-depth product knowledge,

confidence and skills. This would

enable you to recommend Roto‘s

high quality products and provide

first class workmanship to your

customers. By sharing our technical

experience you will improve your

profitability by demonstrating the

reduced installation times uniquely

achieved when installing Roto

products. Participation in our

training programme is ideal for

people wanting to improve their

InformationRotoCampus

Info

rmat

ion

Terms & Conditions of Sales

DefinitionsIn these conditions“SELLER” means ROTO FRANK LIMITED of Swift Point, Rugby, CV21 1QH“BUYER” means the person or company who accepts a quotation of the Seller for the sale of the Goods or for whose order for the Goods is accepted by the Seller“GOODS” means the goods (including any instalment of the goods or any parts for them) which the Seller is to supply iaccordance with these Conditions“HEAD OFFICE OF THE SELLER” means Swift Point, Rugby, CV21 1QH

ConditionsThese conditions shall form the basis of the contract between the Seller and the Buyer. Notwithstanding anything to the contrary in the Buyer‘s standard condi-tions of purchase, these conditions shall apply except so far as expressly agreed in writing by a properly authorised person at the Head Office of the Seller. No servant or agent of the Seller has power to vary these conditions orally or to make representations or promises about the condition of Goods, their fitness for any purpose or any other matter whatsoever.

1. Order AcceptanceUnless otherwise expressly stated in writing, all quotations and estimates by the Seller are invitations to treat. The Buyers order is an offer and will become binding upon the Seller either posting its confirmation of the order or despatching any or all of the Goods contained in the Buyer‘s offer. A confirmed order may only be cancelled or varied with the Seller‘s consent; the giving of the Seller‘s consent shall not in any way prejudice the Seller‘s right to recover from the Buyer full compensation for any loss or expense arising from such cancellation or variation.

2. Guarantee2.1 The Seller warrants that the Goods conform to the contract specification and to any sample referred to in that specification2.2 The Seller shall have no liability for any alleged fai-lure of the goods to conform to the contract specification unless such failure is notified to the Head Office of the Seller within 7 days of them being delivered2.3 If any of the Goods are found not to be in accor-dance with the contract specifications the Buyer shallnotify the Seller within 7 days of their being delivered. The Buyer will then arrange for the goods to be delivered back to the Seller and if upon examination by the Seller’s the Goods are found not to conform to the contract specification the Seller may, at its sole option, either:(a) at its own expense replace the Goods found not to be in accordance with the specification; or(b) reduce the contract price by an amount equivalent to that proportion of the price payable in respect of the Goods found not to conform with the contract specification2.4 For any such other failure the Buyer must provide the Seller with written notification at the Head Office of the Seller of such failure within 6 months of the date of delivery or (if the Goods have been supplied bythe Seller under a main contract with a defects liability period) the end of the defects liability period whichever is shorter2.5 The Buyer shall in any case accept and pay at the contract rate for all Goods which conform with the con tract specification2.6 The Seller shall not be liable for any economic loss suffered by the buyer as a result of the failure of anygoods to conform to the contract specification, inclu-ding loss of profits, business, goodwill, or other con sequential loss2.7 The Seller does not warrant that the goods are fit for any particular purpose of the Buyer unless other-wise stated by the Seller2.8 Save as provided for in this clause the Seller shall have no liability for any defect in the quality of the Goods or their failure to correspond to any description or sample or to be fit for any purpose and all other conditions, warranties, stipulations and undertakings, whether express or implied by statute or common2.9 In the case of components or products not of the Seller‘s manufacture, but supplied by the Seller as part of a contract or order, the Seller will assign to the Buyer its rights against its supplier and these rights shall be taken in extinction of and substitution for any rights which the Buyer would otherwise have had against the Seller2.10 The liability of the Seller under this guarantee shall be limited to the invoice value of the components repla ced or repaired and the Seller shall not be liable for any consequential loss or damage howsoever caused. It shall be the duty of the Buyer to insure against such

consequential loss and to hold the Seller harmless therefrom. The Seller shall not be liable under this guarantee for any defect in the Goods resulting directly or indirectly from their misuse by or the negligence of the Buyer.3. Title, Risk and Insurance3.1 Goods delivered shall be at the buyers risk from the time they are delivered3.2 Property in Goods delivered shall not pass to the Buyer until the buyer has paid all sums due to the Seller(a) in respect of the goods(b) on any other account(c) or until the Goods are resold by the Buyer in the normal course of business and at commercially reaso nable terms whichever is the earlier3.3 Until property in the Goods passes to the Buyer in accordance with clause 3.2 the Buyer shall hold themas bailee for the Seller and shall store them separa-tely from any similar goods of the Buyer or any other person in such a way that they remain identifiable as the Seller’s property3.4 The Buyer hereby grants the Seller, its agents, and employees and irrevocable licence at any time to enter any premises where the Goods are stored in order to inspect them or, where the Buyer’s right to possessi on has terminated, recover them3.5 The Buyer shall from the time when under the terms of these conditions they become the sole risk of the Buyer fully insure the Goods against all risks with a reputable insurance company at its own expense. The insurance shall cover the Seller‘s interest in the Goods, and the Buyer shall hold in a separate bank ac count all monies paid under such insurance in trust for the Seller and shall pay the same to the Seller on demand.

4. Delivery4.1 Unless otherwise agreed and stated, all quotations and estimates assume delivery in full loads. The Seller reserves the right to charge extra for delivery in part loads where requested by the Buyer4.2 The Seller will deliver as near as possible to the site as a safe hard road permits4.3 The Buyer shall provide at their own expense the labour for unloading and stacking: such labour to be available during normal working hours on the day no-tified by the Seller for delivery. The Buyer shall unload with reasonable despatch. Damage due to inadequate site access or unloading shall be at the Buyer‘s risk4.4 The Buyer shall note any claim for short delivery and/or for the damage to components on the delivery schedule at the time of delivery and shall confirm such claims in writing to the Seller€s Head Office within 7 working days from the date of delivery. Compliance with this requirement shall be a condition precedent to any claim for short delivery and/or damaged compon-ents. If short delivery does take place, the Buyerundertakes not to reject the Goods but to accept the Goods delivered as a part performance of the con tract The Seller undertakes to use its best endeavours to have the Goods ready for delivery by the dateagreed for delivery but it is agreed that the Buyer shall not be entitled to terminate this contract by reason of the Seller’s failure to deliver at the agreed date and the Seller accepts no liability for any consequential loss incurred by the Buyer as a result of any late delivery4.6 Time of delivery shall not be of the essence of the contract unless expressly stipulated in writing.4.7 If delivery is delayed by strikes, lock outs, fire, acci-dents, defective materials, delays in receipt of raw ma terials or bought-in goods or components, or any other cause beyond the reasonable control of the Seller areasonable extension of time for delivery shall be granted and the Buyer shall pay such reasonable extra charges as shall have been occasioned by the delay4.8 Where the Goods are not delivered by the Seller, but by an independent carrier nominated by the Buyer, delivery to the carrier shall be delivery to the Buyer4.9 If the Buyer fails to take delivery of the Goods or fails to give the Seller adequate delivery instructions at the time stated for delivery (otherwise than by reason of any cause beyond the Buyer’s reasonable controlor by reason of the Seller’s fault) then, without prejudi-ce to any other right or remedy available to the Sel ler, the Seller may:(a) store the Goods until actual delivery and charge the Buyer for the reasonable costs (including insu rance) of storage; or(b) sell the Goods at the best price readily obtainable and (after deducting all reasonable storage andselling expenses) account to the Buyer for the excess over the price under the Contract or charge the Buyer for any shortfall below the price under the Contract.

5. CarriageThe Sellers standard terms of delivery are ex works, unless otherwise expressly stated in writing.

6. Cost Variation6.1 All quotations and estimates issued by the Seller are, unless otherwise stated, based on current cost of production (materials, hours and wages) and are subject to amendment on or after acceptance to meet any recognised rise or fall in such cost, including exchange rate fluctuations6.2 Value Added Tax not included in the quotation or estimate will be added where and at the rate applicable.

7. Government Taxes or LeviesAny variation to prices quoted as a result of government taxes and levies will be for the Buyer‘s account.

8. Terms of Payment8.1 The Buyer shall pay the price of the Goods (less any discount to which the Buyer is entitled, but without any other deduction) in accordance with the Seller’s payment terms of 30 days net, and the Seller shall be entitled to recover the price, notwithstanding that delive-ry may not have taken place and the property inthe Goods has not passed to the Buyer. The time of pay-ment of the price shall be of the essence of the Contract. Receipts for payment will be issued only upon request.8.2 If the Buyer shall fail to pay promptly, they shall lose the benefit of any previously agreed discount. Failure to make payment at the due date shall entitle the Seller to suspend deliveries until payment is made or to terminate the contract in writing or to treat the contract as repudi-ated by the Buyer without prejudice to the Seller‘s rights to damages for breach of contract.8.3 Any delay in making payment for the Goods shall entitle the Seller to charge interest on the outstanding amount at 3% above the base rate charged by the Seller‘s bankers from the due date until the date of ac tual payment. If payment is made more than 30 days af-ter the due date, the Seller is entitled to charge interest on the outstanding amount at 8% above the base rate charged by the Seller’s bankers from the due date until the date of actual payment.8.4 The Buyer must pay the full invoice price, without any deduction, counterclaim or set off on the grounds of any alleged shortfall in delivery, defect of quality or failure to conform to specification or any other breach of contract by the Seller

9. PackagingUnless otherwise agreed the Goods shall be delivered in the Seller‘s standard packaging. Special packaging specifications to meet the Buyer‘s requirements must be referred to the Seller for review and acceptance. The Seller shall make a charge for this and the cost will be shown as a separate item on the invoice.

10. LienIn addition to any right of lien to which the Seller may by law be entitled it shall have a general lien on all Goods of the Buyer in its possession (although such Goods or some of them may have been paid for) for the unpaid price of any other Goods sold and delivered to the Buyer by the Seller under the same or other contracts.

11. Return of Goods11.1 We will accept Goods for return subject to clause 2. Goods will be accepted in accordance with clause 2 and those Goods that are wrongly supplied by the Seller to the Buyer, but all other Goods will be returned subject to the Sellers prior agreement and upon terms as it shall in its absolute discretion think fit11.2 All Goods must be accompanied by a Returns Note received from the Seller. A charge is levied after ins pection of the Goods upon receipt into the warehouse by the Seller at its discretion11.3 Freight is payable by the Buyer

12. WaiverThe Seller‘s rights shall not be affected or restricted by any indulgence or forbearance granted to the Buyer. No waiver by the Seller of any breach shall operate as a waiver of any later breach.

13. ReferencesAll orders are accepted subject to the Seller obtaining satisfactory trade references for the Buyer

14. ConstructionThe rights and obligations of the parties and all the terms and conditions hereof and any disputes arising out thereof shall be construed in accordance with English law to the jurisdiction of the courts of which the Buyer shall submit.

68

The Roto promise and service

The Roto promiseStrong commitment

Roto serviceA real win-win partnership

For us what ultimately matters is

offering you – our partners in

specialist merchants, in the roofing

trade and in the architectural world

– perceptible added value. With

accommodating, individual support

with a personal touch, and with

premium products for roofing

technology that save you effort and

make the everyday world of your

customers a bit more pleasant, more

convenient, and more attractive.

Offering high quality products is

not all, we should accompany our

customers and give them an

advantage that sets them apart

from their competitors! Trust in

Roto products is choosing:

A German company with

environmental awareness and

sustainability as a guiding principle

Continous innovation and efficient

organisation

A win-win strategy and exclusive

partnership with professionals

A dynamic and accessible team

at your disposal for each step

of your project

Practically oriented seminars in the

RotoCampus training centre with

training courses on topics ranging

from sales to installation, providing

true expertise for our partners

To offer the premium alternative

of environmentally-friendly, top-

quality products in timber, Oak or

PVC which meets current themal,

economical and ecological

challenges

With Roto products, you opt for

brand quality ‘made in Germany’*.

Our roof windows and accessories

are manufactured from first-class

materials with durability, wear

resistance and best care

characteristics. Before a product

leaves our production plant, it is

put through its paces and tested

in accordance with DIN standards.

We leave both the sale and

installation of Roto products to the

professionals: the Roto partners in

the specialised merchant and

roofing trade.

15 year warranty against glass breakage caused by hail, hardware breakage, PVC frame breakage for loads in accordance with RAL GZ 716/1

2 year warranty for blinds, electric products and accessories

* Over 90% of our products ** Look for FSC certified products*** TÜV is a German agency of control and standardisation well known in the world of security and certification of services and products; here the TÜV certification is valid for PVC roof window Designo R8

**

69

Roto Product brochure 2013www.roto-frank.co.uk

Co

pyr

igh

t ©

20

13 R

oto

Gro

up

. B

ran

d,

log

o a

nd

vis

ual

s p

rote

cte

d.

Su

bje

ct

to c

han

ge

wit

ho

ut

no

tice

. P

ictu

res

and

co

lou

rs a

re n

ot

bin

din

g.

Pro

du

ct

bro

chu

re U

K/0

513

/Tb

KE

/Sch

D/1

0.0

00

RotoRoof Windows and Hardware Ltd.Swift Point Rugby

Warwickshire, CV21 1QH

Phone +44 (0)1788 558600

Fax +44 (0)1788 558606

[email protected]

This product brochure contains part

of our extensive Roto product range.

More detailed information can be

obtained from your local Roto

merchant or roofing contractor.

Roto Roof Windows Product brochure 2013

Documents

Transcript of Roto Roof Windows Product brochure 2013