Roto-moulding Machine Assistance
-
Upload
john-p-bandoquillo -
Category
Documents
-
view
3 -
download
0
description
Transcript of Roto-moulding Machine Assistance
Roto-moulding machine assistance From: [email protected] [mailto:[email protected]]
Sent: Tuesday, September 23, 2014 3:55 PM
To: Jaffar M. Bijli Subject: Site support documents - Roto-moulding equipments
Dear Jaffar,
As requested, we inform you that you can find the below points in our list of services as written in block letters
near your points.
We will send two technicians, each one follow one machine and we will need 2 mechanical persons per
machine plus a crane with the driver for each machine.
We can send the two technicians in November, but we need to know from you when you will be ready to start
the assembling even to ask for the visa.
Best regards
Luca Sacchi
POLIVINIL ROTOMACHINERY S.p.A. ROTOMACHINERY GROUP Via Crosa 53, 28065 Cerano (No) Italy Tel: +39 0321 772021 Fax: +39 0321 772027 Mail: [email protected] Web: http://www.rotomachinerygroup.com
Il giorno 18/set/2014, alle ore 21:58, Jaffar M. Bijli <[email protected]> ha scritto:
Dear Luca, Hope you are doing well. Can you please provide us the complete machine layouts (final for construction / as built) of our roto-moulding machines including civil details, construction, electrical and other installation support documents, and as follows; Note: We have your reference document as attached but the electrical trenches shown are not enough especially the coordinates and location on site.
We need a complete package for our reference to be used at site for construction – set of final manuals SENT BEFORE
Points of all utilities required to be connected to the machine PAGE 5 OF THE LIST
Electrical connections and related requirements PAGE 14 OF THE LIST
Foundation details – for floor preparation PAGE 13 OF THE LIST
Other customer manuals if at all available for reference to be used at site and for future
Please expedite as it is very important for our design team at construction site. The current machine layouts are good for machine details only but we need your technical support to prepare our site accordingly. Regarding manpower, please suggest the required number of work force with their required profession / skills in order to support your installation engineers at site. Let us know who will be coming from Polivinil for the installation and commissioning task. Furthermore, let us know the tentative schedule of the installation at site as we need to prepare ourselves accordingly. Best Regards Jaffar, Rowad Excellence is doing ordinary things extra ordinarily well. It is not a skill, but the right attitude.
------------------------------------
This email is for use by the intended recipient(s) and may contain privileged, confidential or copyrighted
information. Unauthorized use, copying or distribution of this e-mail, in whole or in part, is strictly prohibited. If you should
not be an intended recipient of this e-mail, please notify the sender by return e-mail and delete this e-mail.. The information
transmitted in electronic mail does not necessarily represent the views of TASNEE. E-mail transmission cannot be guaranteed
to be secured or error-free as information could be intercepted, corrupted, lost, destroyed, received late or incomplete, or could
contain viruses. The sender therefore does not accept liability for any error or omission in the contents of this message, which
arises as a result of e-mail transmission. No representation is made that this email or any attachments are free of viruses. Virus
scanning is recommended and is the responsibility of the recipient ...
------------------------------------
<Installation machine_customers_REV.02_C.140042-43_INGLESE.pdf>