Rotary VREX HD Lift Brochure.2016.04 · ROTARY LIFT V-REX Vertical Rise Drvei On- s Ltfi 44,000,...
Transcript of Rotary VREX HD Lift Brochure.2016.04 · ROTARY LIFT V-REX Vertical Rise Drvei On- s Ltfi 44,000,...
RO
TA
RY
LIF
T V-REX Vertical Rise Drive-On Lifts44,000, 64,000 and 80,000 lbs. CAPACITIES
V-REX vertical rise lift services the largest vehicles in a new space-saving design.
Lit# Rotary V-REX HD Lift Brochure.2016.04
©2016 VEHICLE SERVICE GROUPSM, Printed in U.S.A., All Rights Reserved. Unless otherwise indicated, ROTARY LIFT, VEHICLE SERVICE GROUPSM, DOVER and all other trademarks are property of Dover Corporation and its affiliates.
HEAVY DUTY PRODUCTIVITY FOR YOUR MAINTENANCE FACILITY
Powerful V-REX platform lifts offer superior and solid solutions for all of your
mechanical and service repairs.
Rolling Bridge Jacks allow the front, rear, or all wheels to be lifted off the runways for brake, tire, alignment and suspension work. Jacks are supported between the runways, not on the top.
Wash Bay Kits can be installed into wash bays for easy vehicle cleaning with a certified remote stainless steel control panel.
g
Rolling Bridge Jack Retractable Wheel Kit
Runway wheel kit legs retract for easy rolling jack removal
ADDITIONAL OPTIONS:• Internal Air Kit connections for Rolling Jacks
• 12’ Ramp Kits
• Bolt on Wheel Curbs
• Electronic Height Limiter
• Heavy Duty Turntables for Alignment Service
• Tapeswitches for Inside and Outside of Runways
• Audible Descent Alarm KitPendant ControlsThe pendant allows for remote operation away from the lift console
the runways, not on the top.
Lighting unit includes 60W power supply unit, 8mm cable and suspensions
LED Runway Lighting KitAttach the light wands to runways for effective, efficient lighting where you need it.• 120V AC input voltage • 60hz
Increase bay productivity with these drive-on lift accessories
OPTIONAL LIFT ACCESSORIES
MW-500 Tire Lift reduces risk of technician injury with this 500 lbs.capacity tire lift. Air operated (100 psi) with no batteries. Includes pressure regulator to prevent overloading.
Global Contact InformationUSA: 1.812.273.1622 Canada: 1.905.812.9920 Latin America / Caribbean: 1.812.273.1622 Brazil: +55.11.4534.1995
Rotary Lift2700 Lanier Drive Madison, IN 47250, USA
North / South America Contact InformationSales: p 800.640.5438 e [email protected] Tech. Support: p 800.445.5438 e [email protected]
For additional world wide contact information and a complete guide to our product offering, visit us on the web at rotarylift.com.
Assistance for Government PurchasingGovernment Sales: 800.445.5438 X5655
Contract No. 061015-RRL
COLLAPSED HEIGHT
MAX. RISE
SHOWN WITH 10’ STANDARD RAMP - SURFACE INSTALL
LIFT COLORSRunways and Ramps
RAL3002RAL5005 RAL9005
RAL7040
44,000 / 64,0000 / 80,000 lbs. HEAVY-DUTY CAPACITIES
Ten locking positions at convenient and ergonomic working heights.
Legs and Console
Available in 22,000, 32,000 and 36,000 lbs. capacities
AND VALIDATED
Model Shown: VREX64-48X / 64,000 lbs. capacity drive-on lift / surface mounted
Model Shown: VREX80-32X80,000 lbs. capacity drive-on surface mounted lift with 10’ approach ramps and optional rolling jacks
AND VALIDATED
ENVIRONMENTALLY-FRIENDLY
TM
SPECIFICATIONS V-REX44 V-REX64 V-REX80Capacity* 44,000 lbs. 64,000 lbs. 80,000 lbs.
Maximum RiseBottom of base to runway top
77 3/4”
Collapsed Height 16 - 1/4”
Rise Time 90 seconds
A. Runway Lengths** 28’, 32’, 36’*, 48’
B. Overall LengthsWith standard 10’ approach ramps
38’, 42’, 46’, 58’
C. Width of Runway 32”
D. Overall Width 109”
E. Distance Between Runways 45”
Motor 20 hp
Electrical Standard 3ph, 208-230/460/575
Number of legs 4
Minimum Floor Thickness 6”
* 44K, 64K and 80K capacities for all runway lengths. with the exception of the 36’ runway length. It is available in 44K and 64K capacities only.
** 30’ runway available with 2’ extension on 28’ runway
Designed for facilities with limited bay space, the patent-pending V-REX lift system provides versatile heavy duty vertical lifting.
Runway extensions add the versatility of a 24”wheelbase range adjustment.**
SAVE BAY SPACE AND MONEY
NEW
Superior by DesignRotary maintains the industry’s largest in-house mechanical, electrical and controls engineering staff using state of the art design, modeling and analysis software to ensure you get a well designed, reliable product.
FIVE AVAILABLE RUNWAY LENGTHS
Proudly built in Madison, Indiana, USA
77.75”
16.25
44,000 / 64,0000 / 80,000 lbs. CAPACITIES
Model Shown: VRX80-48X80,000 lbs. capacity drive-on liftSurface mounted with 10’ approach ramps and optional rolling jacks
V-REX Vertical Rise Drive-On Lifts
Wide Platform Top Plates create a greater drive on area with a non-skid platform surface for traction.
Independant Runways are specially designed to minimize deflection under the heaviest loads
10’ Extended, Low-Profile Ramps are standard on surface models
AND VALIDATED
TM
Environmentally FriendlyAll VR lifts are bio fluid compatible and 99% recyclable, protecting the environment.
Large Torque Box Runway Design with engineered tubular steel decreases deflection seen regularly in competitor’s lifts.
77” Vertical Rise Technicians now have the height to get repair work done on any heavy-duty machinery.
PRODUCTIVITY and PERFORMANCE FEATURES
bs. CAPACITIES
• 3 heavy duty lifting capacities with 5 runway lengths
• Ten locking positions at convenient and ergonomic working heights
• 3 installation configurations: Surface / Recessed Pit / Flush
• Platforms are extra wide for easier drive on and off
• Lift is removable and re-locatable with only 16 anchors
• Manual lowering in the case of a power outage
• Durable zinc primer and epoxy lift paint for long life in any environment
• ALI third-party Gold Certified
The new V-REX TM services your largest vehicles while setting a new strength and reliability standard in vertical rise lifts.
NEW Innovative Vertical Rise Design INDUSTRY’S LOWEST DEFLECTION RATESFour bar engineered rotational linkage transfers lower forces to the foundation, optimizing lift efficiency and decreasing installation costs. This positive force leg design has less maintenance than comparable designs and the superior structural steel tubing and fixed plate runway design has minimized the deflection seen in similar vertical rise lifts. Rotary’s innovative leg design incorporates heavy-duty bearings to ensure a long lift life.
The V-REX’s leg design features rotational hinge links with composite and UHMW bearings. They rotate and pivot rather than slide to increase efficiency and reduce wear. The 2”solid steel leg construction peforms betterthan plate/ tube combinations which can flex and create stress points.
EXCLUSIVE LEG DESIGNRotational Hinged Positive Force LinksLIFTING THE LARGEST VEHICLES WITH EASE
2” thick high-strength steel links
The V-REX lift contains limited sliding components or wear items to inspect or maintain
2” and 3” pins provide increased surface area to reduce loading on the pivoting members.
Rear Automatic Wheel Chocks engage when the lift is raised and release when lowered
Platform FrontWheel Stops
Control UnitBuilt with robust, simple buttons and switches for long life, the lift can be programmed with multiple height presets.
The microprocessor-controlled unit monitors all mechanical and electrical synchronization systems at over 125 times per second.
Open Front and Rear Design creates working clearance through the entire middle of lift.
Superior Mechanical LocksRotary’s proven negative rake mechanical locks on each lifting mechanism are position monitored for increased reliability and operation. They are made of high strength, wear resistant steel with exclusive negative rake radius teeth with the ten position locks.
Communication cables are protected in an industrial
energy chain.
Each lifting leg assembly features a robust 7” lifting cylinder system that "breathes" at the control panelimproving cycle life and reducing downtime seen in other designs. These maximum force, short stroke hydraulic cylinders utilize a leg design that lifts vehicles with little movement. Cylinders are protected by our proven negative rake high strength steel locking system and scissor legs
NEW Patented Pending Direct Cylinder Stroke Measuring SystemIncorporated within the cylinder, this controlled equalization technologydirectly measures cylinder stroke keeping the platforms level during lift operation. Keeping sensors with-in the cylinder prevents damage andexpensive recalibration visits.
ROTARY LIFT HEAVY DUTY SOLUTIONS
Model Shown: VRX44-48X44,000 lbs. capacity drive-on lift
Surface mounted with 10’ approach ramps and optional rolling jacks
AND VALIDATED
Model Shown: VRX44-28X / 44,000 lbs. capacity drive-on liftSurface mounted with 10’ approach ramps and optional rolling jacks AND VALIDATED