Rose_Josh API MPMS Chapters 5 and 6 Final
description
Transcript of Rose_Josh API MPMS Chapters 5 and 6 Final
![Page 1: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/1.jpg)
API MPMS Chapters 5 and 6 Presented By: Josh Rose, FMC Technologies
![Page 2: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/2.jpg)
API MPMS – History
• API’s Manual of Petroleum Measurements Standards (MPMS) has been the Best Measurement Practice (BMP) for the measurement of petroleum products since the 1920’s
![Page 3: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/3.jpg)
API MPMS – Standards Development The standards are developed in working groups consisting of experts from the industry's principal suppliers, consultants, and principal operating companies.
The process allows for review and approval by the Committee on Petroleum Measurement so that all concerns are properly addressed.
![Page 4: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/4.jpg)
Chapter 5 – Metering
Defines the internationally recognized metering technologies for petroleum measurement and the accessories needed to provide secure, accurate, and reliable measurement.
![Page 5: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/5.jpg)
Chapter 5 – Standards
Chapter 5.1 General Considerations for Measurement by Meters 4th Edition / October 2005
![Page 6: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/6.jpg)
Chapter 5 – Standards
Chapter 5.2 Measurement of Liquid Hydrocarbons by Displacement Meters 3rd Edition / October 2005
![Page 7: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/7.jpg)
Chapter 5 – Standards
Chapter 5.3 Measurement of Liquid Hydrocarbons by Turbine Meters 5th Edition / September 2005
![Page 8: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/8.jpg)
Chapter 5 – Standards
Chapter 5.4 Accessory Equipment for Liquid Meters 4th Edition / September 2005
![Page 9: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/9.jpg)
Chapter 5 – Standards
Chapter 5.5 Fidelity and Security of Flow Measurement Pulsed-Data Transmission Systems 2nd Edition / July 2005
![Page 10: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/10.jpg)
Chapter 5 – Standards
Chapter 5.6 Measurement of Liquid Hydrocarbons by Coriolis Meters 1st Edition / October 2002
![Page 11: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/11.jpg)
Chapter 5 – Standards
Chapter 5.8 Measurement of Liquid Hydrocarbons by Ultrasonic Flowmeters Using Transit Time Technology 2nd Edition / February 2005
![Page 12: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/12.jpg)
Chapter 5.1 – General Considerations Provides guidelines common to all metering technologies including: • Advantages of metering • Guidelines for meter selection • Meter performance criteria • Considerations for installation
and operation
![Page 13: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/13.jpg)
Meters – PD, TM, Coriolis, and LUFM Standard section in each of the respective meter standards: • Introduction • Scope • Field of application • Reference publications
![Page 14: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/14.jpg)
Meters – PD, TM, Coriolis, and LUFM (Cont.) • Design considerations • Selection of meter and accessories • Installation • Meter performance
![Page 15: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/15.jpg)
Meters – PD, TM, Coriolis, and LUFM Additional sections may also be included where needed. For example the ultrasonic meter standard also includes: • Auditing and reporting requirements • Diagnostics and security and access • Security and access
![Page 16: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/16.jpg)
Meters – PD, TM, Coriolis, and LUFM In addition annexes are normally included to explain a specific aspect of the technology. For example the 2011 Ultrasonic standard includes: • Principle of operation • Verification and validation of meter
performance
![Page 17: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/17.jpg)
Meters – PD, TM, Coriolis, and LUFM (Cont.) • Reynolds number performance • Manufactured flow pulses and their
Impact on the proving process
![Page 18: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/18.jpg)
Chapter 5.8 – Example Appendix A – Principal of Operation
The average velocity is therefore determined by the following:
![Page 19: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/19.jpg)
5.4 Accessory Equipment – Meters The proper operation of a meter also includes the proper meter accessories. This standard includes: 5.4. 6 Mechanical Accessories 5.4. 7 Electronic Accessories
![Page 20: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/20.jpg)
5.4 Accessory Equipment – Meters (Cont.) 5.4. 8 Interface Connections 5.4. 9 Installing Pulse-Driven Accessories 5.4.12 Security
![Page 21: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/21.jpg)
5.5 Fidelity and Security of Pulse – Data Transmission
The details to install and operate today's sophisticated electronic meters and accessories are addressed by these standards. • 5.5.6 Levels of Security • 5.4.7 System Design Considerations
![Page 22: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/22.jpg)
5.5 Fidelity and Security of Pulse – Data Transmission (Cont.)
• 5.5.8 Installation • 5.5.9 Inspection and Maintenance
![Page 23: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/23.jpg)
5.0 Summary
API Chapter 5 provides the latest and best information on all metering technologies for custody transfer and other high accuracy petroleum measurement applications.
![Page 24: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/24.jpg)
Chapter 6 – Metering Assemblies Provides specific information on some common systems used for measuring liquid hydrocarbons
![Page 25: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/25.jpg)
Chapter 6 – Standards Chapter 6.1 Lease Automatic Custody Transfer (LACT) Systems 2nd Edition / May 1991 / Reaffirmed, March 2002
![Page 26: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/26.jpg)
Chapter 6 – Standards (Cont.) Chapter 6.2 Loading Rack Metering Systems 3rd Edition / February 2004
![Page 27: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/27.jpg)
Chapter 6 – Standards (Cont.) Chapter 6.4 Metering Systems for Aviation Fueling Facilities 1st Edition / June 1984 / Reaffirmed, October 2001
![Page 28: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/28.jpg)
Chapter 6 – Standards (Cont.) Chapter 6.5 Metering Systems for Loading and Unloading Marine Bulk Carriers 2nd Edition / May 1991 / Reaffirmed, March 2002
![Page 29: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/29.jpg)
Chapter 6 – Standards (Cont.) Chapter 6.6 Pipeline Metering Systems 2nd Edition / May 1991 / Reaffirmed, March 2002
![Page 30: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/30.jpg)
Chapter 6 – Standards (Cont.) Chapter 6.7 Metering Viscous Hydrocarbons 2 2nd Edition / May 1991 / Reaffirmed, March 2002
![Page 31: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/31.jpg)
Chapter 6.1 – LACT
• Scope of Application – The design and operation of unattended Custody Transfer (CT) system for the transfer of crude oil from the production field to a pipeline carrier
• Requirements – A LACT shall provide the net volume and quality of the crude in a fail-safe tamperproof system
![Page 32: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/32.jpg)
Chapter 6.1 – LACT (Cont.) • CT Meter – Traditionally positive
displacement and turbine meters were used but Coriolis mass meters are also in use today
• Proving – LACT systems must have a means for proving the CT meter; normally they have connections for a portable prover
• Delivery – Details on the connecting to the pipeline are included in this standard
![Page 33: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/33.jpg)
Chapter 6.2 – Load Rack
• Field of Application – Design, selection of equipment and operation of loading rack metering system for loading hydrocarbons into tank trucks
• Requirements – The system must provide gross volume to safely load the truck and net volume for the invoice. It must meet all local weights and measures requirements because it is a wholesale transaction
![Page 34: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/34.jpg)
Chapter 6.2 – Load Rack (Cont.)
• CT Meter – Normally positive displacement meters are used for viscous products and turbine meters for light products. Coriolis mass meters are also in use today, practically for LPG applications
• Proving – The CT meter are proven with portable provers either bi-annually or quarterly depending on seasonal conditions
![Page 35: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/35.jpg)
Chapter 6.2 – Load Rack (Cont.)
• Blending and Additives – Many large loading terminals have sophisticated blending and additive injection systems. The proper design and use of the different available systems are addressed in the standard
![Page 36: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/36.jpg)
Chapter 6.2 – Example Ratio Blending System
![Page 37: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/37.jpg)
Chapter 6.4 – Aviation
• Field of Application – General requirements for the metering of aviation fuel dispensed to an aircraft either by a “refueler” or a "Hydrant Cart “
• Refuelers – Are tank trucks with meters, filters, pumps, and controls to refuel aircraft. Normally they are built to also defuel planes
![Page 38: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/38.jpg)
Chapter 6.4 – Aviation (Cont.)
• Hydrant Carts – Have only a meter and controls. They are connected to a hydrant system that has filters and pumps
• Requirements – The fuel may be loaded at gross observed volume (uncompensated for temperature) but standard volume is used for weight calculation and stock reconciliation
![Page 39: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/39.jpg)
Chapter 6.4 – Aviation (Cont.)
• Meters – Non-ferrous mechanical positive displacement meters are predominately used for aviation meters but electronic meters are permitted
• Proving – The standard has details on how and when to prove aviation meters
![Page 40: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/40.jpg)
Chapter 6.4 – Example Hydrant Cart with Mechanical Meter
![Page 41: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/41.jpg)
Chapter 6.5 – Marine
• Scope of Application – The operation and special arrangement of meters, provers, accessories, and instrumentation for loading and unloading of bulk marine carriers
• Requirements – Marine metering systems are normally dedicated for loading or unloading. Loading systems are typically the custody transfer point. Unloading systems check the delivery
![Page 42: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/42.jpg)
Chapter 6.5 – Marine (Cont.)
• CT Meter – Marine volume transfers are large, typically 80,000 to 800,000m3, so high volume PD Meters and traditional and helical turbine meters are used. Ultrasonic meters can also be used but require larger provers
![Page 43: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/43.jpg)
Chapter 6.5 – Marine (Cont.) • Proving – The volume and value of
these transfers require the highest level of accuracy possible. In most cases the meters are proven at least once on each loading or unloading of a ship
• Delivery – The systems includes samplers for qualitative measurement and the delivered volume is in standard units corrected for temperature and pressure
![Page 44: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/44.jpg)
Chapter 6.6 – Pipeline
• Scope of Application – The selection of the type of meters, accessories, and instruments; optimum proving methods and best operation of the metering system
• Field of Application – Gathering systems, crude, and refined products and LPG pipelines
![Page 45: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/45.jpg)
Chapter 6.6 – Pipeline (Cont.) • Requirements – Pipeline systems are
the custody transfer point and deliveries are typically based on a contract where measurement standards such as API are specified
• CT Meter – Traditionally positive displacement and turbine meters were used but Coriolis mass meters, helical turbine meters, and ultrasonic meters may be used
![Page 46: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/46.jpg)
Chapter 6.6 – Pipeline (Cont.) • Proving – The type of meter, products
to be transported, and volume of the transfer determine the best proving method, which is well addressed in this standard
• Delivery – As with marine systems pipeline systems include samplers for qualitative measurement and the delivered volume is in standard units corrected for temperature and pressure
![Page 47: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/47.jpg)
Chapter 6.7 – Viscous Hydrocarbons • Scope of Application – The selection
and operation of meters on high viscosity (HV) hydrocarbons, especially when heated to facility flow
• Requirements – The meter and accessories must be chosen to meet the operating requirements. In many cases the special meter construction is needed so details of the application must be provided the manufacturer
![Page 48: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/48.jpg)
Chapter 6.7 – Viscous Hydrocarbons (Cont.) • CT Meter – Traditionally positive
displacement meters are used for HV applications but helical turbine meters, Coriolis mass meters, and ultrasonic meters are also used in selective applications
• Proving – The type of meter and characteristics of the product determine the best proving method as discussed in the standard
![Page 49: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/49.jpg)
Chapter 6.7 – Viscous Hydrocarbons (Cont.) Delivery – Systems include samplers for qualitative measurement and the delivered volume is in standard units corrected for temperature and pressure. In general the uncertainty in the measurement of HV hydrocarbons is greater than lower viscosity products.
![Page 50: Rose_Josh API MPMS Chapters 5 and 6 Final](https://reader031.fdocuments.us/reader031/viewer/2022012306/552b93b0550346dc478b471e/html5/thumbnails/50.jpg)
Conclusion
API’s MPMS Chapters 5 and 6 offer : • Over 80 years of experience in the
accurate measurement of petroleum • The Best Measurement Practice in
using new measurement technologies such as Coriolis and ultrasonic meters