RONCO | Material Chemical Resistance Chart

6

Click here to load reader

description

Glove Selection Guide - Analyze material vs chemical ratings. The information appearing on this chart is intended to serve solely as a general guide for glove material selection; and it does not act as a warranty for the performance of any particular glove in any particular work application. The information does not address permeation break-through times of any particular glove nor does it address specific work conditions. Therefore, when evaluating the suitability of any glove for any application, it is strongly recommended that its evaluation be based on actual working conditions. It is to be noted that chemical resistance in a glove is obtained by virtue of two main factors. The first factor is that the glove material needs to have the ability to resist the various types of chemicals; and for that material to be abundantly sufficient in the glove so as to provide reasonable protective thickness. The second factor is that the gloves must be impermeable. In other words, they must not have any ruptures or holes that will allow permeation. Gloves that protect only up to the wrist are generally not recommended for handling chemicals as they lack proper wrist and forearm protection. However, by virtue of their chemical resistant materials, they may still be sound for use in low level exposure environments with very diluted or light chemical splash action. It is up to the end-user to make their own determination as to the suitability of the product for their own intended purpose.

Transcript of RONCO | Material Chemical Resistance Chart

Page 1: RONCO | Material Chemical Resistance Chart

Chemical Resistance Chart(For Glove Material Selection)

Page 1 of 6

www.ronco.ca

CHEMICAL MATERIAL SELECTIONLatex Nitrile Vinyl / PVC Neoprene

Acetaldehyde Good Good NR Very Good

Acetaldehyde 99.5% Good Fair NR NA

Acetic Acid Very Good Very Good Fair Very Good

Acetic Acid 99+% NA Very Good NA Very Good

Acetone Very Good NR NR Good

Acetone 99.5% Very Good NR NR Fair

Acetonitrile Good NR NR Good

Acetonitrile 99% Good NA NR Good

Acrylic Acid 99% Good NA NA NR

Ammonium Fluoride 40% Good Very Good Good Very Good

Ammonium Hydroxide Good Very Good Very Good Very Good

Ammonium Hydroxide < 30% Good Very Good Very Good Very Good

Ammonium Hydroxide 85% Good NA Very Good Very Good

Amyl Acetate Fair Fair NR NR

Amyl Acetate 100% NR NA NR NA

Amyl Alcohol Good Good NR Very Good

Amyl Alcohol 99+% Good Good NR Good

Aniline Good NR Fair Good

Aniline 99+% Fair NR NR NR

Animal Fats NR Very Good Good Very Good

Aqua Regia NR Good Good Good

Benzaldehyde Fair NR NR NR

Benzene NR NR NR NR

Benzoly Chloride NR NA NR NR

Bromopropionic Acid, Sat. Good Good NA Fair

Butane NR Very Good NR Very Good

Butyl Acetate Fair NR NR NA

Butyl Acetate 99% NR NR NR NA

Butyl Alcohol Very Good Very Good Good Very Good

Butyl Alcohol, 99% Very Good Very Good Good Very Good

Butyl Cellosolve 99% Very Good Very Good NR Good

Butyrolactone 99% Very Good NR NA Good

Carbolic Acid NR NR Good NA

Carbon Disulfide Fair NR NR NR

Carbon Disulfide 99% NR NR NR NR

Carbon Tetrachloride NR Good NR NR

Castor Oil NR Very Good Very Good Good

Cellosolve Acetate Good Good NR Fair

Cellosolve Acetate 99+% Good Good NR NA

Cellosolve Solvent (2-ethoxy ethanol)

Good Good NA Very Good

Chlorine Good Good Good NA

Chlorobenzene NR NR NR NR

RATINGS DEFINED

Very Good

Material is very resistant and recommended for handling the

chemical. It is either not affected, or only negligibly affected

over a period of eight hours. Repeated use needs to be

gauged. (Full immersion or splash action)

Good

Material is reasonably resistant for handling the chemical.

Slight corrosion or discoloration may be experienced, but not

enough to alter performance significantly over several hours.

Repeated or prolonged use needs to be gauged. (Full immersion

or splash action)

Fair

Material is only moderately resistant to the chemical and needs

to be used with reservations. Continuous or prolonged used is

not recommended as it will experience loss of strength,

swelling and/or softening which may lead to permeation

and/or degradation. (Splash action only)

NR = Not Recommended

Material is not recommended for handling the chemical

as it will quickly experience permeation and/or degradation.

NA = Not Available

Information is insufficient to make a determination

Please refer to page 6 of this chart for butyl and viton material

performance for these chemicals.

SPECIAL NOTES

The information appearing on this chart is intended to

serve solely as a general guide for glove material selection;

and it does not act as a warranty for the performance of any

particular glove in any particular work application.

The information does not address permeation break-through

times of any particular glove nor does it address specific work

conditions. Therefore, when evaluating the suitability of any

glove for any application, it is strongly recommended that its

evaluation be based on actual working conditions.

It is to be noted that chemical resistance in a glove is obtained

by virtue of two main factors. The first factor is that the glove

material needs to have the ability to resist the various types of

chemicals; and for that material to be abundantly sufficient in

the glove so as to provide reasonable protective thickness.

The second factor is that the gloves must be impermeable.

In other words, they must not have any ruptures or holes

that will allow permeation.

Gloves that protect only up to the wrist are generally not

recommended for handling chemicals as they lack proper wrist

and forearm protection. However, by virtue of their chemical

resistant materials, they may still be sound for use in low level

exposure environments with very diluted or light chemical splash

action. It is up to the end-user to make their own determination

as to the suitability of the product for their own intended

purpose.

Page 2: RONCO | Material Chemical Resistance Chart

Page 2 of 6

www.ronco.ca

MATERIAL RATINGS

Chemical Resistance Chart(For Glove Material Selection)

CHEMICAL MATERIAL SELECTIONLatex Nitrile Vinyl / PVC Neoprene

Chloroform NR NR NR Fair

Chloronaphthalene NR NR NR Fair

Chlorothene VG NR NR NR NR

Chromic Acid NR NR Good NR

Chromic Acid 50% NR NR Good NR

Citric Acid 10% Very Good Very Good Very Good Very Good

Cottonseed Oil NR Very Good Good Very Good

Cresole NR Good NR Fair

Cutting Oil Fair Very Good NR Very Good

Cyclohexane NR Very Good NR Fair

Cyclohexanol Fair Very Good Good Good

Cyclohexanol 98% Fair Very Good Good Fair

Diacetone Alcohol NA Very Good NR Good

Diacetone Alcohol 99% NA Very Good NR Good

Dibutyl Phthalate NR Good NR Fair

Dibutyl Phthalate, 99% NR Good NR Fair

Diesel Fuel NR Very Good NA Good

Diethylamine NR Fair NR NR

Di-isobutyl Ketone (DIBK) NR Fair NA NR

Dimethyl Sulfoxide (DMSO) Very Good Very Good NR Very Good

Dimethyl Sulfoxide 99+% Very Good Very Good NR Very Good

Dimethylformamide (DMF) Good Fair NR Fair

Dimethylformamide 99+% Good NA NR NA

Dioctyl Phthalate (DOP) NR Very Good NR Good

Dioctyl Phthalate, 99% NR Very Good NR Good

Dioxane Fair Fair NR NA

Epoxy Resins, Dry Good Very Good NA Very Good

Ethyl Acetate Fair NR NR Good

Ethyl Acetate 99+% NR NR NR NA

Ethyl Alcohol (Ethanol) Very Good Very Good Good Very Good

Ethyl Alcohol 90+% Very Good Very Good NA Very Good

Ethyl Ether Fair Very Good NR Very Good

Ethyl Ether 99+% Fair Very Good NR Good

Ethyl Glycol Ether NA NR NA NA

Ethyl Glycol Ether 99% NR NR NA Good

Ethylene Dichloride NR NR NR NR

Ethylene Glycol Very Good Very Good Very Good Very Good

Ethylene Glycol 99+% Very Good Very Good Very Good Very Good

Ethylene Trichloride NR NR NR NA

Formaldehyde Very Good Very Good Very Good Very Good

Formaldehyde 99% Very Good Very Good Very Good Very Good

Formic Acid Very Good Very Good Very Good Very Good

Formic Acid 95+% Very Good Good Very Good Very Good

RATINGS DEFINED

Very Good

Material is very resistant and recommended for handling the

chemical. It is either not affected, or only negligibly affected

over a period of eight hours. Repeated use needs to be

gauged. (Full immersion or splash action)

Good

Material is reasonably resistant for handling the chemical.

Slight corrosion or discoloration may be experienced, but not

enough to alter performance significantly over several hours.

Repeated or prolonged use needs to be gauged. (Full immersion

or splash action)

Fair

Material is only moderately resistant to the chemical and needs

to be used with reservations. Continuous or prolonged used is

not recommended as it will experience loss of strength,

swelling and/or softening which may lead to permeation

and/or degradation. (Splash action only)

NR = Not Recommended

Material is not recommended for handling the chemical

as it will quickly experience permeation and/or degradation.

NA = Not Available

Information is insufficient to make a determination

Please refer to page 6 of this chart for butyl and viton material

performance for these chemicals.

RONCO NeoFit (16-263)Heavy Duty Black Neoprene GlovesFlocklined, 28 mil, 12” long

RONCO NeoLex (56-562)Bi-colour Neoprene over latex(blue neoprene over yellow latex)Flocklined, 22 mil, 12” long

RONCO NeoFit and NeoLex offer good protection against hydraulic fluids, gasoline, alchohols, organic acids and alkalis.

Applications Include: • Dry and wet chemical handling • Industrial cleaning • Handling of agricultural chemicals • Laboratory and hospital use • Printing - roller cleaning and maintenance • Professional workshops - handling paints, solvents, ink greases and oils

EN388

3111

EN374-3

EN374-2

EN388

2101

EN374-3

EN374-2

Page 3: RONCO | Material Chemical Resistance Chart

Page 3 of 6

www.ronco.ca

Chemical Resistance Chart(For Glove Material Selection)

CHEMICAL MATERIAL SELECTIONLatex Nitrile Vinyl / PVC Neoprene

Freon 11 NR Good Fair Good

Freon 12 NR Good Fair Good

Freon 21 NR Good Fair Good

Freon 22 NR Good Fair Good

Freon TF 99+% NR NA Fair NR

Furfural Good NR NR Good

Furfural, 99% Good NR NR Fair

Gasoline, Leaded NR Very Good NR Good

Gasoline, Unleaded NR Very Good NR Good

Glycerine Very Good Very Good Very Good Very Good

Hexamethyldisilazine 97% Good Good NA NA

Hexane NR Very Good NR Very Good

Hexane 99% NR Good NR NA

Hydraulic Fluid Ester Based NR NR NR NR

Hydraulic Fluid Petro. Based NR Good Good Fair

Hydrazine Good Good Very Good Very Good

Hydrazine 65% Good Good Very Good Very Good

Hydrochloric Acid Good Good Very Good Very Good

Hydrochloric Acid 37% Very Good Good Very Good Very Good

Hydrofluoric Acid Very Good Very Good Very Good Very Good

Hydrofluoric Acid 48% Very Good Good Very Good Very Good

Hydrogen Peroxide Very Good Very Good Very Good Very Good

Hydrogen Peroxide 30% Very Good Very Good Very Good Very Good

Hydroquinone Good Good Very Good Very Good

Hydroquinone, Sat. Good Good Very Good Very Good

Isobutyl Alcohol Very Good Very Good Good Very Good

Isobutyl Alcohol 99+% Very Good Very Good Good Very Good

Iso-Octane NR Very Good NR Good

Iso-Octane 99% NR Very Good NR NA

Isopropyl Alcohol Very Good Very Good Good Very Good

Isopropyl Alcohol 99+% NA Very Good Good Very Good

Kerosene Fair Very Good Fair Very Good

Kerosene 100% Fair Very Good NA NA

Ketones Very Good NR NR Fair

Lacquer Thinners Fair NR NR Fair

Lactic Acid Very Good Very Good Very Good Very Good

Lactic Acid 85% Very Good Very Good Very Good Very Good

Lauric Acid 36% Good Very Good Fair Very Good

Linoleic Acid NR Good Good Very Good

Linseed Oil NR Very Good Very Good Very Good

Maleic Acid Very Good Very Good Very Good Very Good

Maleic Acid, Sat. Very Good Very Good Very Good Very Good

Methyl Acetate NR NR NR Good

RONCO Sol-Fit (29-958)Heavy Duty Green Nitrile GlovesUnlined, 22 mil, 18” long

RONCO Sol-Fit nitrile gloves offer an excellent combination of physical strength and chemical resistance. They are good for all types of industrial and institutional use including:

• Oil refining and petrochemicals • Cleaning and degreasing • Food processing and production• Automobile parts assembly• Furniture manufacturing• Professional workshops - handling paints, solvents, ink greases and oils

EN388

4102

EN374-3

RATINGS DEFINED

Very Good

Material is very resistant and recommended for handling the

chemical. It is either not affected, or only negligibly affected

over a period of eight hours. Repeated use needs to be

gauged. (Full immersion or splash action)

Good

Material is reasonably resistant for handling the chemical.

Slight corrosion or discoloration may be experienced, but not

enough to alter performance significantly over several hours.

Repeated or prolonged use needs to be gauged. (Full immersion

or splash action)

Fair

Material is only moderately resistant to the chemical and needs

to be used with reservations. Continuous or prolonged used is

not recommended as it will experience loss of strength,

swelling and/or softening which may lead to permeation

and/or degradation. (Splash action only)

NR = Not Recommended

Material is not recommended for handling the chemical

as it will quickly experience permeation and/or degradation.

NA = Not Available

Information is insufficient to make a determination

Please refer to page 6 of this chart for butyl and viton material

performance for these chemicals.

Page 4: RONCO | Material Chemical Resistance Chart

Page 4 of 6

www.ronco.ca

Chemical Resistance Chart(For Glove Material Selection)

CHEMICAL MATERIAL SELECTIONLatex Nitrile Vinyl / PVC Neoprene

Methyl Alcohol (Methanol) Very Good Very Good Good Very Good

Methyl Alcohol 99.9+% Very Good Very Good Good Very Good

Methyl Bromide Fair Fair Fair Fair

Methyl Cellosolve NR Fair NR Very Good

Methyl Cellosolve 99% NR NR NR Very Good

Methyl Chloride NR NR NR NR

Methyl Ethyl Ketone (MEK) Good NR NR Fair

Methyl Isobutyl Ketone (MIBK)

Fair NR NR NR

Methyl Methacrylate Fair NR NR NR

Methylamine Good Good Very Good Good

Methylamine 40% Good Good Very Good Good

Methylene Bromide NR NR NR NR

Methylene Chloride NR NR NR NR

Mineral Oil NR Very Good Fair Good

Mineral Spirits NR Very Good Fair Good

Mineral Spirits, Rule 66, 100%

NR Very Good NA NA

Monoethanolamine Good Very Good Very Good Very Good

Monoethanolamine 99+% NA Very Good Very Good Good

Morpholine Very Good NA NR NR

Muriatic Acids Good Good Good Good

Naphtha VM & P NR Very Good NR Fair

Naphtha VM & P, 100% NR Very Good NR NR

Naphthas, Aliphatic Fair Very Good NA Good

Naphthas, Aromatic NR Good NA Good

Napthalene Fair Good Fair Good

Nitric Acid Fair Fair Fair Good

Nitric Acid <30% Fair NR Fair Good

Nitric Acid 70% NA NR NR Good

Nitric Acid Red Fuming NR NR NR NR

Nitrobenzene NR NR NR NR

Nitromethane Fair NR NR Good

Nitromethane 95.5% NR NA NR Good

Nitropropane Good NR NR Good

Nitropropane 95.5% NR NR NR Fair

Octyl Alcohol (Octanol) Very Good Very Good Fair Very Good

Octyl Alcohol, 99+% Very Good Very Good Fair Very Good

Oleic Acid Good Very Good Good Very Good

Oleic Acid 99+% Good Very Good Good Good

Oxalic Acid Very Good Very Good Very Good Very Good

Oxalic Acid, 12.5% Very Good Very Good Very Good Very Good

Palmitic Acid Very Good Very Good Good Very Good

Palmitic Acid, Sat. Very Good Very Good Good Very Good

RATINGS DEFINED

Very Good

Material is very resistant and recommended for handling the

chemical. It is either not affected, or only negligibly affected

over a period of eight hours. Repeated use needs to be

gauged. (Full immersion or splash action)

Good

Material is reasonably resistant for handling the chemical.

Slight corrosion or discoloration may be experienced, but not

enough to alter performance significantly over several hours.

Repeated or prolonged use needs to be gauged. (Full immersion

or splash action)

Fair

Material is only moderately resistant to the chemical and needs

to be used with reservations. Continuous or prolonged used is

not recommended as it will experience loss of strength,

swelling and/or softening which may lead to permeation

and/or degradation. (Splash action only)

NR = Not Recommended

Material is not recommended for handling the chemical

as it will quickly experience permeation and/or degradation.

NA = Not Available

Information is insufficient to make a determination

Please refer to page 6 of this chart for butyl and viton material

performance for these chemicals.

RONCO Ultra-Fit (15-262)Heavy Duty Black Latex GlovesFlocklined, 28 mil, 12” long

RONCO Ultra-Fit is an excellent heavy duty all purpose dry & wetapplication glove.

Applications include: • Food processing and production • Pharmaceutical • Agriculture • Janitorial • Automobile parts assembly • General maintenance

EN388

3121

EN374-3

EN374-2

Page 5: RONCO | Material Chemical Resistance Chart

Page 5 of 6

www.ronco.ca

Chemical Resistance Chart(For Glove Material Selection)

CHEMICAL MATERIAL SELECTIONLatex Nitrile Vinyl / PVC Neoprene

Pentachlorophenol NR Very Good Good Good

Pentachlorophenol 36% in ethanol

NA Very Good NA Good

Pentane NR Very Good NA Good

Pentane 98% NR Very Good NA NR

Perchloric Acid 60% NR Fair Very Good Very Good

Perchloroethylene NR Good NR NR

Petroleum Distillates (Naphtha)

NR Very Good NA NA

Phenol Good Fair Good Good

Phenol 90% Good NR Good NA

Phosphoric Acid Good Very Good Good Very Good

Phosphoric Acid, 85% Good Very Good Good Very Good

Picric Acid Good Very Good Very Good Very Good

Potassium Hydroxide Very Good Very Good Very Good Very Good

Potassium Hydroxide <50% Very Good Very Good Very Good Very Good

Propyl Acetate NR Fair NR Fair

Propyl Alcohol Very Good Very Good NR Very Good

Propyl Alcohol (ISO) Very Good Very Good NR Very Good

Propyl Alcohol 96+% Very Good Very Good NA Very Good

Propylene Oxide NR NA NA NA

Rubber Solvent NR Very Good NR Fair

Rubber Solvent 100% NR Very Good NR Fair

Sodium Hydroxide Very Good Very Good Very Good Very Good

Sodium Hydroxide <50% Very Good Very Good Very Good Good

Stoddard Solvent NR NA NR Fair

Stoddard Solvent 99% NR NA NR NA

Styrene NR Fair NR NR

Styrene 100% NR Fair NR NR

Sulfuric Acid Good Fair Good Fair

Sulfuric Acid 95% Good NR Good Fair

Tannic Acid Very Good Very Good Very Good Very Good

Tannic Acid 65% Very Good Very Good Very Good Very Good

Tetrahydrofuran (THF) Fair Fair NA NR

Toluene NR Fair NR NR

Toluene Diisocyanate (TDI) NA Fair NR NR

Trichloroethylene Fair Good NR NR

Tricresyl Phosphate NR Good NR NA

Tricresyl Phosphate 90% NR Good NR Fair

Triethanolamine Good Very Good Very Good Good

Triethanolamine 85% (TEA) Good Very Good Very Good Good

Tung Oil NR Very Good NA Very Good

Turbine Oil NR Good NA Good

Turpentine NR Very Good NR Good

Vegetable Oil NR Very Good NR Very Good

Xylene NR Fair NR NR

RATINGS DEFINED

Very Good

Material is very resistant and recommended for handling the

chemical. It is either not affected, or only negligibly affected

over a period of eight hours. Repeated use needs to be

gauged. (Full immersion or splash action)

Good

Material is reasonably resistant for handling the chemical.

Slight corrosion or discoloration may be experienced, but not

enough to alter performance significantly over several hours.

Repeated or prolonged use needs to be gauged. (Full immersion

or splash action)

Fair

Material is only moderately resistant to the chemical and needs

to be used with reservations. Continuous or prolonged used is

not recommended as it will experience loss of strength,

swelling and/or softening which may lead to permeation

and/or degradation. (Splash action only)

NR = Not Recommended

Material is not recommended for handling the chemical

as it will quickly experience permeation and/or degradation.

NA = Not Available

Information is insufficient to make a determination

Please refer to page 6 of this chart for butyl and viton material

performance for these chemicals.

EN388

4121

EN374

AJK

EN374

RONCO PVC Dipped(77-325)Blue PVC triple dipped gloves sandy finish, 12” gauntlet seamless cotton interlock liner

RONCO PVC 77-325 is a premium chemical protective glove that provides excellent resistance to oils, fats, solvents and a variety of other chemicals including acids.

Applications include: • Petrochemical and oil refinery • Chemical processing • Fisheries • Cleaning, degreasing and plant maintenance • Battery manufacturing and handling • Masonry and concrete mixing

Page 6: RONCO | Material Chemical Resistance Chart

Page 6 of 6

www.ronco.ca

Chemical Resistance Chart(For Glove Material Selection)

CHEMICAL

Butyl Viton

Amyl Acetate Good NR

Aniline 99+% Very Good NR

BeNAdehyde Very Good Fair

Benzene NR Very Good

Benzoly Chloride NR Good

Butyl Acetate Fair NR

Butyl Acetate 99% NA NA

Carbon Disulfide NR Very Good

Carbon Disulfide 99% NA NA

Chlorobenzene NR Very Good

Chloroform Fair Very Good

Chloronaphthalene NA Good

Chlorothene VG NA NA

Chromic Acid Fair Good

Chromic Acid 50% NA NA

Diethylamine Very Good NR

Di-isobutyl Ketone (DIBK) Fair NR

Dioxane Good NR

Ethyl Acetate Good NR

Ethyl Acetate 99+% NA NA

Ethyl Glycol Ether NA NA

Ethyl Glycol Ether 99% NA NA

Ethylene Dichloride Fair Very Good

Ethylene Trichloride Fair Very Good

Freon TF NR Very Good

Freon TF 99+% NA NA

Hydraulic Fluid Ester Based NR Good

Lacquer Thinners NR NR

Methyl Bromide NR Very Good

Methyl Chloride Fair Very Good

Methyl Isobutyl Ketone (MIBK) Fair NR

Methyl Methacrylate NR NR

Methylene Bromide NR Good

Methylene Chloride NR Good

Nitric Acid Red Fuming NA Fair

Nitrobenzene Very Good Good

Nitropropane Good NR

Nitropropane 95.5% NA NA

Propyl Acetate Good NR

Propylene Oxide Good NR

Stoddard Solvent NR Very Good

Stoddard Solvent 99% NA NA

Styrene NR Good

Styrene 100% NA NA

Tetrahydrofuran (THF) Fair NR

Toluene NR Very Good

Toluene Diisocyanate (TDI) Good NR

Xylene NR Very Good

RONCO PVC Dipped(77-395)Blue 28” PVC triple dipped gloves with extended forearm protection.Sandy finish, seamless cottoninterlock liner

RONCO PVC 77-395 is a premiumchemical protective glove with an extended forearm splash protection for handling a variety of chemicalsincluding oils, greases, solvents and acids.

Applications include: • Petrochemical and oil refinery • Chemical processing • Fisheries • Cleaning, degreasing and plant maintenance • Battery manufacturing and handling • Masonry and concrete mixing

EN388

4121

EN374

AJK

EN374

Need help matching the right glove to the right application?

RONCO Safety Specialistswill do the job for you.

Contact RONCO today to schedule a

RONCO SAFETY ASSESSMENT (RSA)

Phone: 905.660.6700

Email: [email protected]

RONCO Safety Assessment(R

SPECIAL NOTES

The information appearing on this chart is intended to

serve solely as a general guide for glove material selection;

and it does not act as a warranty for the performance of any

particular glove in any particular work application.

The information does not address permeation break-through

times of any particular glove nor does it address specific work

conditions. Therefore, when evaluating the suitability of any

glove for any application, it is strongly recommended that its

evaluation be based on actual working conditions.

It is to be noted that chemical resistance in a glove is obtained

by virtue of two main factors. The first factor is that the glove

material needs to have the ability to resist the various types of

chemicals; and for that material to be abundantly sufficient in

the glove so as to provide reasonable protective thickness.

The second factor is that the gloves must be impermeable.

In other words, they must not have any ruptures or holes

that will allow permeation.

Gloves that protect only up to the wrist are generally not

recommended for handling chemicals as they lack proper wrist

and forearm protection. However, by virtue of their chemical

resistant materials, they may still be sound for use in low level

exposure environments with very diluted or light chemical splash

action. It is up to the end-user to make their own determination

as to the suitability of the product for their own intended

purpose.

RATINGS DEFINED

Very Good

Material is very resistant and recommended for handling the

chemical. It is either not affected, or only negligibly affected

over a period of eight hours. Repeated use needs to be

gauged. (Full immersion or splash action)

Good

Material is reasonably resistant for handling the chemical.

Slight corrosion or discoloration may be experienced, but not

enough to alter performance significantly over several hours.

Repeated or prolonged use needs to be gauged. (Full immersion

or splash action)

Fair

Material is only moderately resistant to the chemical and needs

to be used with reservations. Continuous or prolonged used is

not recommended as it will experience loss of strength,

swelling and/or softening which may lead to permeation

and/or degradation. (Splash action only)

NR = Not Recommended

Material is not recommended for handling the chemical

as it will quickly experience permeation and/or degradation.

NA = Not Available

Information is insufficient to make a determination

Please refer to page 6 of this chart for butyl and viton material

performance for these chemicals.

RSA