Rolling Gate Hardware - Builders Fence Company,...

Replaces: Effective: 1 ROLLING GATE HARDWARE

© 201 BUILDERS FENCE CO., INC. PRICES SUBJECT TO CHANGE WITHOUT NOTICE

8530 UNSWORTH AVE.SACRAMENTO, CA 95828-1009

1-916-381-4065

13111 DAHLIA ST.FONTANA, CA 92337-6902

1-909-350-9040

8937 SAN FERNANDO RD.SUN VALLEY, CA 91352-1410

1-818-504-3700

10010 PORTLAND AVE.TACOMA, WA 98445-3956

1-253-535-5500

1265 N. CUYAMACA ST.EL CAJON, CA 92020-1549

1-619-449-0333

Rolling Gate Hardware

GALVANIZED V-TRACK — FOR USE WITH V-GROOVE WHEELPAINTED V-TRACK AVAILABLE BY SPECIAL ORDER

PriceItem# Style Angle Size 0 - 8 8 and up

83561-G Plain 1 1/2” x 1 1/2” x 3/16” 65.36 54.4783575-G With J-Bolts 1 1/2” x 1 1/2” x 3/16” 79.60 66.3383576-G With Tabs 1 1/2” x 1 1/2” x 3/16” 79.60 66.3383577-G On 1/4” x 4” Plate 1 1/2” x 1 1/2” x 3/16” 203.87 169.8983574-G With J-Bolts 2” x 2” x 1/4” 178.45 148.71

All above with hot dip galvanized finish.

83577-GT 12ga. G-90 Formed Plate with 7/16” holes 40.65 38.35

• J-bolts or tabs are positioned every 18” on alternate sides of V-track. • Tabs have holes drilled for mounting.• When using 1/4” x 4” plate, 1/2” holes are drilled every 18”. in alternate positions for anchor bolts.• Please specify the style required when ordering.• Available in 20’ lengths only.

83339-30 Gate Stop for V-Track, Zinc Plated 16.9583339-10 4” Angle Gate Stop with Gusset (mount to gate) 10.19

CHANNEL TRACK — FOR USE WITH CHANNEL TRACK WHEELItem# Description Per 20’ length

15101 1” x 2” x 3/16” (Galvanized) 90.99

• Channel track can be welded on or bolted on.• Available in 20’ lengths only.• (See page 6 for spacers.)

PLAIN

WITH J-BOLTS

WITH TABS

WITH DRILLED PLATE( 1/4” x 4” )

18”

18”

ASTM A 36 Steel20’ lengths only

3 5/8”

Gate Stop ForV-Track

4” AngleGate Stop

09

10-27-2008 7-15-2009




1-916-381-4065


1-909-350-9040


1-818-504-3700


1-253-535-5500


1-619-449-0333


RUBBER GROUND WHEEL — BALL BEARING ( P. S. HUB )Sack Sack Price Each

Item# Size Qty. Wt. Less Sack Sack

14702 6” x 5/8” Axle 6 12 lbs. 10.97 9.1414704 8” x 5/8” Axle 6 18 lbs. 17.05 14.21

EVERLAST RUBBER WHEELTested to Exceed 5,000 lbs. — 2” Tire width14752 6” x 5/8” Axle 5 18 lbs. 21.23 17.6914754 8” x 5/8” Axle 5 20 lbs. 28.31 23.59

V-GROOVE WHEEL — IRONWith Steel Roller Bearing — Includes Axle14718 4” x 1/2” Axle 1 1/2” width 4 20 lbs. 21.36 17.8014705 4” x 1/2” Axle 2 1/2” width 4 20 lbs. 23.16 19.3014706 6” x 1/2” Axle 2 1/2” width 4 28 lbs. 32.60 27.17*14707 8” Diameter 3 1/4” width 4 38 lbs. 63.04 52.53*( 1” axle not included )14706-DEL 6” x 5/8” Axle 2 1/2” width 4 27 lbs. • •With Delrin Bushing — Tested to Exceed 3,500 lbs. — Includes 5/8” Axle.

V-GROOVE WHEEL — SOLID STEEL14706-10 6” Solid Steel Wheel 4 89.39 74.49

4,000 lb. capacity each wheel

14706-EL 6” Solid Steel Power Wheel 4 108.56 90.475,000 lb. capacity each wheel

14705-10 4” Solid Steel Power Wheel 4 63.17 52.643,000 lb. capacity each wheel

Solid Steel Wheels are designed to be maintenance free on continuous duty applications.• 4" wheel includes two - 2" sealed bearings with 1" axle and one 1/2" x 3.25" bolt with nut.• 6" wheel includes two - 2.5" sealed bearings with 1.18" axle and one 5/8" x 3.25" bolt with nut.

V-GROOVE NYLON WHEEL14692 4” Diameter 4 34.26 28.55

Recommended on light weight gates for quiet operation.1/2” diameter axle with lubricated brass bushing.

08

4-15-2008 10-27-2008




1-916-381-4065


1-909-350-9040


1-818-504-3700


1-253-535-5500


1-619-449-0333


COMPLETE WHEEL ASSEMBLYQty. Per Price Each

Item# Description Sack Less Sack Sack

83362 6” w/ 5/8” Axle 4 44.89 37.4183364 8” w/ 5/8” Axle 4 48.37 40.3183366 Box Sides only (set of 2) 7.96 NA

• Wheels available as complete assembly, wheel only, sides only.• Specify 1/2” or 5/8” axle size when ordering wheel only.• Complete assembly is designed for weld on application only.• Specify 1 1/2” or 2” frame size when ordering assembly.

COMPLETE WHEEL ASSEMBLY83369 6” Wheel Assembly 4 58.98 49.15

Includes V-Groove wheel # 1470683366 Box Sides only (set of 2) 7.96 NA

• Complete assembly is designed for weld on application only.• Specify 1 1/2” or 2” frame size when ordering assembly.

WHEEL BOX FOR 2” x 4” BOTTOM RAIL83374E End Wheel Box 4 45.38 37.82

6” x 5/8” axle83374C Center Wheel Box 4 45.38 37.82

6” x 5/8” axle

WHEEL PLATE — (PAIR)83367-10 Wheel Plates 4 12.60 10.50

• Sold in pairs. The wheel plates are 3/16” x 3 1/2” x 6” with a 1/2” dia. hole and made for welded applications

RUBBER WHEELW / AXLE

WHEEL BOXSIDES

WHEEL BOX

V-GROOVE WHEELW / AXLE

WHEEL BOXSIDES

WHEEL BOX

CENTER WHEEL BOX

END WHEEL BOX

08

4-26-2004 5-7-2008

Replaces: Effective: 1, 2 ROLLING GATE HARDWARE



1-916-381-4065


1-909-350-9040


1-818-504-3700


1-253-535-5500


1-619-449-0333


Qty. Per Sack Price EachItem# Sack Weight Less Sack Sack

14810 10 30 lbs. 11.12 9.27

• For use with 1 5/8” pipe track.• See page 6 for clamp on brackets.• This 5” Track Wheel is designed for clamp-on applications and clamp-on brackets must be utilized.

5” (PRESSED STEEL) TRACK WHEEL14800-DEL 10 23 lbs. 16.66 13.88

• Pipe track roller with retainer.

14812-DEL 10 26 lbs. 14.12 11.77

• Double Bracket only ( UNIVERSAL ).

5” (GALVANIZED IRON) TRACK WHEEL WITHDOUBLE BRACKET — Item# 14812-DEL14811-DEL 10 53 lbs. 43.43 36.19

Double Bracket

Pressed Steelwith Delrin Bushing

Is sold as a set only

Galvanized Ironwith Delrin Bushing

08

SAFETY PIPE TRACK WHEEL — PRESSED STEEL, WITH 6” BOLT

5-30-2006 4-15-2008




1-916-381-4065


1-909-350-9040


1-818-504-3700


1-253-535-5500


1-619-449-0333


2

CANTILEVER HARDWARE WITH NYLON ROLLERSQty. Per Sack Price Each

Item# Style Sack Weight Less Sack Sack

14714-RND 4” round post x 2” square frame 8 44 lbs. 171.60 143.00

14714-SQ 4” square post x 2” square frame 8 44 lbs. 153.60 128.00

• Hot-dipped galvanized chassis / Graphite impregnated nylon cantilever gate roller.• Fits 2” square tubing and is shown with 4” square mount.• 2,200 lbs. rating.

CANTILEVER ROLLER COVERS

PolyPlastic 14722-10F 28 1.5 lbs. 40.00 33.40

Fits 14714-RND and 14714-SQ above

Covers for square gate frame would require some cutting “out”since the covers are all for round gate frames.

Plastic Cover 14722-10H 16 1.5 lbs. 40.00 33.40With pressed steel bracketFits 14716-10F and 14711-15, and 2 7/8” & 4” galvanized iron wheels

• Polyethylene plastic with UV inhibitors or pressed steel.• Adjustable cover and adapts to most cantilever wheels.

INDUSTRIAL SLIDE GATE LATCHQty. Per PRICE EACH

Item# Sack Less Sack Sack

83339 10 11.68 9.26

• Weld on installation only. • Includes locking tab.• Tab welds to gate frame. • Receiver welds or bolts to post / wall.

14722-10F 14722-10H

CANTILEVERROLLERS & COVERS

• Wheel covers required for all cantilever wheels.— Sold separately —

3-1-2012 9-10-2012




1-916-381-4065


1-909-350-9040


1-818-504-3700


1-253-535-5500


1-619-449-0333

TYPE I — SLIDE GATEROLLER ASSEMBLY

Qty. Per Price EachItem# Style Sack Less Sack Sack

83559 TYPE I * 6 29.72 24.77w/Bronze Bushing

TYPE II — SLIDE GATE ROLLER ASSEMBLY PRICE PER SET83580 4” Black 6 29.72 24.77

w/Bronze Bushing83558-10 6” Black 6 29.18 24.32

w/Ball Bearings83580-12B 12” Black 6 62.83 52.36

w/Ball Bearings83580-12C 12” Clear 6 79.90 66.58

w/Ball Bearings


* TYPE I: For use on Regal, Empire, and Napoleon style gates.

** TYPE II: For use on Aristocrat, Guardian, Modern and all style gates.

Slide gate roller assemblies are designed for use on gates manufactured with: • V-Groove wheels located at both ends of the gate. • Larger gates may require two (2) slide gate roller assemblies. • Weld on or bolt on installation. • Refer to roller assembly style gate pages in the

FENCING & GATE section for installation detail.

TYPE II **

08

TRACK BRACKETQty. Per Price Each

Item# Style Sack Less Sack Sack

83553 2” 20 3.30 2.7583554 2 1/2” 20 3.13 2.6114907 Flat Wall 10 4.96 4.13

• Used for attaching pipe track to fence line.• Refer to post size when ordering.

CLAMP-ON BRACKET83555 1 1/2” 25 2.22 1.8583556 2” 25 2.56 2.13

TRACK SPACER FOR CHANNEL BRACKET15001 All Sizes 25 1.55 1.29

• Used to space channel track away from from mounting surface.• Weld on or use U-bolt for track installation.• Use one track spacer at every mounting point.

7-18-2012 9-10-2012




1-916-381-4065


1-909-350-9040


1-818-504-3700


1-253-535-5500


1-619-449-0333


3

FOR THE PLACEMENT OF THE SYSTEM COMPONENTSSEE THE DRAWING ON THE FOLLOWING PAGE

BFC BOTTOM TRACK CANTILEVER GATE SYSTEM

BFC SYSTEM COMPONENTS — MEDIUMEach Gate Price

Item# Sample Description Requires Each

146323.6 C Medium Track, 20' Galv 1 or more 149.71146301.8M D Medium 8 Wheel Support Roller 2 85.5014727-16 F 1/2" x 16" Galv L Bolt W/Nut & Washer 8 6.85146310.M A Cantilever Gate Limit Stop Medium 1 or 2 18.49146307.M H End Cap With Wheel 1 or 2 34.36146309.M B Steel Cap For Medium Track 1 or 2 10.21

83580 G BFC Type II (OH Roller Set) 2 29.72

BFC SYSTEM COMPONENTS — LARGE147328.6 C Large Track, 20' Galv 1 or more 252.00147301.8L D Large 8 Wheel Support Roller 2 171.0014728-16 F 5/8" x 16" Galv L Bolt W/Nut & Washer 12 8.8614726-TGP E (Optional) Ground Plate 2 23.80147310.L A Cantilever Gate Limit Stop Large 1 or 2 23.40147307.L H End Cap With Wheel 1 or 2 47.36147309.L B Steel Cap For Large Track 1 or 2 12.6083580 G BFC Type II (OH Roller Set) 2 29.72

BFC SYSTEM COMPONENTS — XTRA LARGE148333.6 C Xtra Large Track, 20' Galv 1 or more 736.20148301.8XL D Xtra Large 8 Wheel Support Roller 2 309.6014729-M20 F 3/4" x 16" Galv L Bolt W/Nut & Washer 12 9.9714729-TGP E (Optional) Ground Plate 2 43.85148310.XL A Cantilever Gate Limit Stop XL 1 or 2 54.00148307.XL H End Cap With Wheel 1 or 2 73.99148309.XL B Steel Cap For XL Track 1 or 2 37.8083580 G BFC Type II (OH Roller Set) 2 29.72

147301.8LAV Conversion kit for large support roller to fit Piccolo track

2 14.40

146304.M73 2 7/8" OD post clamp on mounting bracket for medium support roller

2 75.31

147304.8L102 4" OD round post clamp on mounting bracket for large support roller

2 108.00

147304.8L102Q 4" square post clamp on mounting bracket for large support roller

2 108.00

236” long track sold inFULL LENGTHS ONLY*24 foot maximum opening 1,200 lbs maximum load All items are galvanized steel



11-1-2012 12-23-2013

Replaces: Effective: 1, 2, 4 ROLLING GATE HARDWARE



1-916-381-4065


1-909-350-9040


1-818-504-3700


1-253-535-5500


1-619-449-0333

(DOES NOT INCLUDE AMOUNT USED FOR POSTS)

LATCH POST CAN GO ON SIDE OR AT END OF GATE

PLAN VIEW

ELEVATION OF BASE

CONCRETE BASE FOR THIS GATE: 18" W X 21" D X 7' LUSES .8 CUBIC YARDS CONCRETE

RECEIVER CUP (A)AT BOTTOM OF GATE, WELDS TO POST

USE (H) AT LATCH END AND (B) AT OTHER END

C-C TROLLIES

2" SQ 11 GA PREGALV FRAME3/4" SQ 16 GA PREGALV PICKETS AT 4 1/2" OCFINISH: POWDER COAT BLACK

168" 84"

252"

INSIDE ELEVATION

GUIDE ROLLER POSTS

SET BASE PLATES FLUSH TO TOP OF CONCRETE

21"

18"

10 1/2"

21"

OPENING

63"

5'-0"

7 1/2"

SECTION

3 1/4" CLEAR3 1/2" TRACK

10 1/2" 10 1/2"

10 1/2"

7 1/2"

SCALE: DWG NO.DATE

CONTRACTOR: PROJECT:

10/24/12 BFC-XXXDETAIL:

BUILDERS FENCE COMPANY

J. FORREST ARISTOCRAT CANTILEVER GATE


12

BFC BOTTOM TRACK CANTILEVER GATE SYSTEM

Receiver Cup

End Cap

Cantilever Bottom Track *

Cantilever Gate Trolly

(Optional) Trolly Ground Plate

Hook Bolts

BFC Type II (O.H. roller set)

End Cap With Wheel

A

B

C

D

E

F

G

H

5-1-2012 11-1-2012

Rolling Gate Hardware - Builders Fence Company,...

Documents

Transcript of Rolling Gate Hardware - Builders Fence Company,...