Roller Conveyor ES-1821 - Pangborn Group
Transcript of Roller Conveyor ES-1821 - Pangborn Group
Roller Conveyor ES-1821
Combination Descaling System
The Pangborn® ES-1821 combination descaling system provide high volume production and cost effective performance for deburring, cleaning, descaling, deflashing or etching. Pangborn® ES-1821 offer users extremely versatile for efficient blast coverage.
Your Global Resource for Shot Blasting Equipment
www.pangborngroup.com
RollER ConvEyoR ES-1821 Combination DESCaling SyStEm
technical Data, Features & benefits
Please contact us for more information or visit us at: www.pangborn.com
or www.pangborngroup.com
Pangborn Corporation4630 Coates Drive
Fairburn, GA 30213Toll Free: 800.638.3000
Phone: 404.665.5700 Fax: 404.665.5701
Email: [email protected]
• Will clean up to 6’-0” wide plate and 36” WF beam in on pass
• Will pass up to a 42” WF beam
• Roller conveyor capacity is 500 lb/ft with rolls on 18” centers
• Solid manganese rolls in blast compartment
• Pangborns state of the art “BE” air wash separator system featuring a 12” air wash drop zone and adjustable skimmer plates for optimum separation efficiency
• Floor mounted “BE” air wash separator for ease of observation and maintenance
• The blast compartment cabinet is fabricated from 3/16” plate, lined with 1/4” welded-in manganese and 1/2” P-41 cast wear resist and 1/2” manganese bolted in-line with the wheels streams
• The blast compartment floor consists of manganese plating
• Six sets of seals - three in the entrance and three in the exit vestibules. The seals next to the blast compartment are polyurethane and the others Lexan®
• Four 25 HP, 150DD-2.5G1 Genesis® Rotoblast® wheels
• 50” pass line with pitless design
• Hinged access door with safety switch
• Five cubic foot abrasive replenisher
• Zero speed switches on the elevators and screw conveyors
• High and low abrasive level indicators are mounted on the storage bin
• Ten adjustable compressed air blow-off nozzles
COST EFFECTIVE CLEANING AND FINISHING SOLUTIONS FOR: • Ferrous and non-ferrous castings• Forgings• Weldments• Heat treated parts
RC-E
S 18
21 -
CDS
-PAN
01