RoHS Lab Analysis Report and Certification - littelfuse.com · ICP-0053 C909543 BODY ICP-0091...
Transcript of RoHS Lab Analysis Report and Certification - littelfuse.com · ICP-0053 C909543 BODY ICP-0091...
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5x20 PGT F LBC 6.3A/250V (P)Product Number: 021706.3MXEP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0052 910-555 CAP
ICP-0058 692539-002 WIRE SOLDER PB FREE
ICP-0053 C909543 BODY
ICP-0091 687205 WIRE
ICP-0059 934-077 CAP WITH LEAD
To view the third party RoHS validation report of these materials see download procedure below
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials whereinvalid Eu RoHS exemptions may be indicated as applicable.
For questions and clarifications, you may send an email to [email protected]
To view the third party RoHS validation report of these materials, see download procedure below
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/ 2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by:
Global EHS Analyst
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5X20MM H PACK (P)Product Number: 02173.15HXP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0052 910-555 CAP
ICP-0058 692539-002 WIRE SOLDER PB FREE
ICP-0053 C909543 BODY
ICP-1432 082554 WIRE
To view the third party RoHS validation report of these materials, see download procedure below.
1 Open the FTP website on your windows explorer: ftp://pubftp littelfuse com/ICP Test Reports/
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
For questions and clarifications, you may send an email to [email protected]
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/ 2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by:
Global EHS Analyst
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5x20 F LBC 6.3A/250V (P)Product Number: 021706.3MXP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0052 910-555 CAP
ICP-0058 692539-002 WIRE SOLDER PB FREE
ICP-0053 C909543 BODY
ICP-0091 687205 WIRE
To view the third party RoHS validation report of these materials, see download procedure below.
1 Open the FTP website on your windows explorer: ftp://pubftp littelfuse com/ICP Test Reports/
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials whereinvalid Eu RoHS exemptions may be indicated as applicable.
For questions and clarifications, you may send an email to [email protected]
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/ 2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5x20 PGT F LBC 10A/250V (P)Product Number: 0217010.MXEP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0059 C030210 PIGTAIL
ICP-0052 910-555 5x20 CAP (0.15MM)
ICP-0058 692539-002 WIRE SOLDER PB FREE 2.7mm DIA
ICP-0053 C909543 BODY
ICP-0055 082589-001 WIRE COPPER TIN PLATED 0.275mm
To view the third party RoHS validation report of these materials see download procedure below
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials whereinvalid Eu RoHS exemptions may be indicated as applicable.
For questions and clarifications, you may send an email to [email protected]
To view the third party RoHS validation report of these materials, see download procedure below
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/ 2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5X20MM H PACK (P)Product Number: 0217008.HXP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0052 910-555 5x20 CAP (0.15MM)
ICP-0058 692539-002 WIRE SOLDER PB FREE 2.7mm DIA
ICP-0053 C909543 BODY
ICP-0294 082588 WIRE
To view the third party RoHS validation report of these materials, see download procedure below.
1 Open the FTP website on your windows explorer: ftp://pubftp littelfuse com/ICP Test Reports/
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials whereinvalid Eu RoHS exemptions may be indicated as applicable.
For questions and clarifications, you may send an email to [email protected]
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/ 2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5x20 F LBC 315mA/250V (P)Product Number: 0217.315MXP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0070 C910510 CAP
ICP-0078 692529 PB FREE SOLDER FOR DT
ICP-0053 C909529 BODY
ICP-0083 087355 GLUE (EP608) *ICP-1481 497567 WIRE
Remarks:
To view the third party RoHS validation report of these materials see download procedure below
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
* Contains Halogen > 900 PPM
For questions and clarifications, you may send an email to [email protected]
To view the third party RoHS validation report of these materials, see download procedure below
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/ 2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5x20 F LBC 4A/250V (P)Product Number: 0217004.MXP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0052 910-555 5x20 CAP (0.15MM)
ICP-0058 692539-002 WIRE SOLDER PB FREE 2.7mm DIA
ICP-0053 C909543 BODY
ICP-1432 082468 WIRE
To view the third party RoHS validation report of these materials, see download procedure below.
1 O th FTP b it i d l ft // bft litt lf /ICP T t R t /
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/ 2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5x20 PGT F LBC 15A/250V (P)Product Number: 0217015.MXEP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0059 C030210 PIGTAIL
ICP-0052 910-555 5x20 CAP (0.15MM)
ICP-0058 692539-002 WIRE SOLDER PB FREE 2.7mm DIA
ICP-0053 C909543 BODY
ICP-0294 082593 WIRE
T i th thi d t R HS lid ti t f th t i l d l d d b l
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
To view the third party RoHS validation report of these materials, see download procedure below
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/ 2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5x20 F LBC 1.6A/250V (P)Product Number: 021701.6MXP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0052 910-555 5x20 CAP (0.15MM)
ICP-0058 692539-002 WIRE SOLDER PB FREE 2.7mm DIA
ICP-0053 C909543 BODY
ICP-1432 082403 20% AGCU .0034
To view the third party RoHS validation report of these materials, see download procedure below.
1 O th FTP b it i d l ft // bft litt lf /ICP T t R t /
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/ 2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUS 250V LBC 5X20 CC BLACK/BLACK RoHS 2AProduct Number: 0217002.MXB950P
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0052 910-555 5x20 CAP (0.15MM)
ICP-0058 692539-002 WIRE SOLDER PB FREE 2.7mm DIA
ICP-0053 C909543 BODY
ICP-1432 082552 WIRE
ICP-0064 425902 INK - BLACK
T i th thi d t R HS lid ti t f th t i l d l d d b l
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
To view the third party RoHS validation report of these materials, see download procedure below
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/ 2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5x20 F LBC 50mA/250V (P) Product Number: 0217.050MXP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP ID Raw Material Description Applicable RoHS
Exemption(s)
ICP-0070 CAPICP-0078 PB FREE SOLDER FOR DTICP-0053 BODYICP-0083 GLUE (EP608) *ICP-0089 WIRE
Remarks: * Contains Halogen > 900ppm
C909529087355
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
Raw Material Part Number
C910510692529
497550
For questions and clarifications, you may send an email to [email protected]
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Global EHS Engineer
Noted by: Arsenio M. Cesista Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5x20 F LBC 5A/250V (P)Product Number: 0217005.MXP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP ID Raw Material Description Applicable RoHS
Exemption(s)
ICP-0058 WIRE SOLDER PB FREE 2.7mm DIAICP-0052 5x20 CAP (0.15MM)ICP-0053 BODYICP-0055 WIRE COPPER TIN PLATED 0.275mm
Remarks:
To view the third party RoHS validation report of these materials see download procedure below
082589-001
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
Raw Material Part Number
692539-002910-555C909543
To view the third party RoHS validation report of these materials, see download procedure below
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Global EHS Engineer
Noted by: Arsenio M. Cesista Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5x20 F LBC 15A/250V (P) Product Number: 0217010.MXP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP ID Raw Material Description Applicable RoHS
Exemption(s)
ICP-0058 WIRE SOLDER PB FREE 2.7mm DIAICP-0052 5x20 CAP (0.15MM)ICP-0053 BODYICP-0055 WIRE COPPER TIN PLATED 0.275mm
Remarks:
To view the third party RoHS validation report of these materials see download procedure below
082589-001
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
Raw Material Part Number
692539-002910-555C909543
To view the third party RoHS validation report of these materials, see download procedure below
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Global EHS Engineer
Noted by: Arsenio M. Cesista Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5x20 F LBC 15A/250V (P) Product Number: 0217015.MXP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP ID Raw Material Description Applicable RoHS
Exemption(s)
ICP-0058 WIRE SOLDER PB FREE 2.7mm DIAICP-0052 5x20 CAP (0.15MM)ICP-0053 BODYICP-0074 WIRE
Remarks: * Contains halogen > 900ppm
To view the third party RoHS validation report of these materials see download procedure below
82593
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
Raw Material Part Number
692539-002910-555C909543
To view the third party RoHS validation report of these materials, see download procedure below
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Global EHS Engineer
Noted by: Arsenio M. Cesista Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 250V LBC FA 5X20 CC RED/RED RoHS 1AProduct Number: 0217001.MXB950P
Table 1. Product material composition and applicable RoHS exemption(s)
ICP ID Raw Material Description Applicable RoHS
Exemption(s)
ICP-0063 INK - RED *ICP-0058 WIRE SOLDER PB FREE 2.7mm DIAICP-0052 5x20 CAP (0.15MM)ICP-0053 BODY
ICP-0171 WIRE
Remarks: * Contains halogen > 900ppm
82551
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
Raw Material Part Number
425901692539-002910-555C909543
For questions and clarifications, you may send an email to [email protected]
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Global EHS Engineer
Noted by: Arsenio M. Cesista Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins RoadSuite 500Chicago, IL 60631www.littelfuse.com
Product Description: FUSE 5X20 CC 1 YELLOW F LBC 2A/250V (P)Product Number: 0217002.MXB941P
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material Part Number
Raw Material Description Applicable RoHS
Exemption(s)
ICP-0052 910-555 5x20 CAP (0.15MM)
ICP-0058 692539-002 WIRE SOLDER PB FREE 2.7mm DIA
ICP-0053 C909543 BODY
ICP-1432 082552 WIRE
ICP-0065 425903 INK - YELLOW *Remarks:
To view the third party RoHS validation report of these materials see download procedure below
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials wherein valid Eu RoHS exemptions may be indicated as applicable.
* Contains Halogen > 900 PPM
For questions and clarifications, you may send an email to [email protected]
To view the third party RoHS validation report of these materials, see download procedure below
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/ 2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by: Sharie Lyn S. MantillaGlobal EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
For questions and clarifications, you may send an email to [email protected]
8755 W. Higgins Road
Suite 500
Chicago, IL 60631
www.littelfuse.com
Product Description: FUSE 5X20MM H PACK (P)
Product Number: 0217002.HXP
Table 1. Product material composition and applicable RoHS exemption(s)
ICP IDRaw Material
Part NumberRaw Material Description
Applicable RoHS
Exemption(s)
ICP-0052 910-555 5x20 CAP (0.15MM)
ICP-0058 692539-002 WIRE SOLDER PB FREE 2.7mm DIA
ICP-0053 C909543 BODY
ICP-1432 082552 WIRE
To view the third party RoHS validation report of these materials, see download procedure below.
1. Open the FTP website on your windows explorer: ftp://pubftp.littelfuse.com/ICP_Test_Reports/
2. Retrieve the username and password thru your corresponding Sales / FAE or email [email protected]
3. Find the corresponding ICP ID and download the corresponding ICP report.
Issued by:
Jennilyn R. Dinglasan
Global EHS Engineer
Noted by: Arsenio M. Cesista, Jr.
Global EHS Manager
RoHS Lab Analysis Report and Certification
This document hereby certifies that the aforementioned product and all its associated materials, are in
compliance with RoHS Directive 2011/65/EU of the European Parliament and of the Council on the restriction of
the use of certain hazardous substances in electrical and electronic equipment.
Furthermore, it is hereby reported that the aforementioned product is composed of the following materials
wherein valid Eu RoHS exemptions may be indicated as applicable.
For questions and clarifications, you may send an email to [email protected]