roducts Information - COM · 2009. 11. 5. · 1994 Concluded a technical contract with TOSHIBA-TEC...

14
Products Information

Transcript of roducts Information - COM · 2009. 11. 5. · 1994 Concluded a technical contract with TOSHIBA-TEC...

Page 1: roducts Information - COM · 2009. 11. 5. · 1994 Concluded a technical contract with TOSHIBA-TEC 1995 Began manufacturing PM stepping motor use for printers, electric typewriters,

PProducts Information

Page 2: roducts Information - COM · 2009. 11. 5. · 1994 Concluded a technical contract with TOSHIBA-TEC 1995 Began manufacturing PM stepping motor use for printers, electric typewriters,

President’s Greetings

WWee ppuurrssuuee tthhee wwoorrlldd’’ss bbeessttWe pursue the world’s best, and make much of the customer’s proposal.Moatech families make a promise to do our best continuously.

TThhaannkk yyoouu ffoorr vviissiittiinngg MMooaatteecchh CCoo..,, LLttdd..Moatech Co., Ltd. controls the quality from first developing stage to final production process bymaking the standard quality system.Therefore, we maintain high quality and the best service which prevents before hand on quality issue.Further more, we are stepping forward to impress our customer by making "the products full ofdevotion and passion" and on same time, "the product which shows the characteristic of the maker".Continuously, we will put our full efforts on "controlling the quality of raw material", "maintaining100ppm in process quality" and "preventing 100% on dispatching the non-conformed products".We will keep our self-esteem by our maintenance of high quality in our system and products.Thank you.

LLiimm,, JJoonngg KKwwaann CEO of Moatech

02/03

2 Greeting

4 Company History

5 Moatech Network, Customer

6 Product information

26 Terminology

27 Index

INDEX

Page 3: roducts Information - COM · 2009. 11. 5. · 1994 Concluded a technical contract with TOSHIBA-TEC 1995 Began manufacturing PM stepping motor use for printers, electric typewriters,

Company History Vision with Customer

Moatech Network

Established “Korea Winding Technology” (Mach 1985)

1990 Exported stepping motor use for 3.5 inch floppy disk drives to TEC corp. in the first time in Korea1992 Designated as specialized manufacturer of stepping motor use for OA and FA by trade,

Industry and energy minister1994 Concluded a technical contract with TOSHIBA-TEC

1995 Began manufacturing PM stepping motor use for printers, electric typewriters, facsimiles and odometers use for car(frame size 25,35,42mm)

1996 Designated as “A prospected telecommunications enterprise” by telecommunications ministerBegan manufacturing stepping motor use for air-con louver Designated as “Superior minor enterprise” by Industrial bank of Korea president

Started up Incheon factory (March 1997)

1997 Started up China factory “Dongguan Dongma Electronic co.”Prized “A prospected minor enterprise prize”Changed the name to “Moatech co., ltd”Listed on KOSDAQ

1998 Achieved ISO 9001 certification (KQC-0559)

Established R&D Center (June 1998)

1998 Began manufacturing stepping motor use for DVD, CD-ROM Drive1999 Designated as “The Best superior stock in KOSDAQ” by Samsung securities, co.

Designated as “Korea Technological Power 50 leading enterprise” by chosun newspaper co.Awarded “Superior of Korea electric part contest” by EIAK.Awarded “Grandprix of venture enterprise” Awarded “Telecommunication enterprise in 1999”

2000 Awarded “Superior of computer peripheral components group in the digital grandprix” Developed "Vibration Coreless Motor use for Mobile phone"Developed "Damper Assembly use for Refrigerator”Awarded “An excellence taxpayer”Awarded “Superior venture company” by Korea nation papers

Established “Moatech Philippines Inc.” (January 2002)

2002 Changed the name of Hongkong company to “Moatech Hongkong Limited”2004 Achieved TS 16949 certification

Achieved ISO 14001 certificationDeveloped "Stepping Motor use for Camcorder and CCD Camera”Developed "Stepping Motor use for Slim ODD's Pick-Up"

Built New R&D Center (June 2004)

2004 Awarded “Outstanding building of Moatech R&D center” by Incheon cityDeveloped "Solenoid use for Slim ODD's Tray In/Out" Developed "BLDC Motor"

2005 Achieved OHASAS 18001 certification (SGS)Awarded "The first class product" by Ministry of Commerce, Industry and EnergyAwarded "50 Million Dollars Export monument"

2006 Added “Hysonic co., ltd” to the affiliatesDeveloped “RCV” for refrigeratorDeveloped “AET, AFLS actuators” for automobileDeveloped “IRIS meter” for CCTV camera

Started up Philippines factory “Moatech MFG. Philippines Inc.” (July 2008)

2009 Achieved “Green Partner” certification by Sony ElectronicsDedicated "The 6th Entrepreneurship Hall of Fame” by Industrial Bank of korea

KOREA

JAPAN

USA

TAIWAN

CHINA

‘95_ PM type step motor

‘96_ Geared type step motor

‘98_ Leadscrew type step motor

‘00_ Vibration Coreless motorDamper Unit

‘04_ SolenoidBLDC

‘07_ Linear stepactuator

‘09_ InCar Sensor VAPS Fan motor

‘06_ RCV, AET,AFLS, IRIS

04/05

Incheon Factory

Head Office, R&D Center

China Factory

Philippines Factory

Page 4: roducts Information - COM · 2009. 11. 5. · 1994 Concluded a technical contract with TOSHIBA-TEC 1995 Began manufacturing PM stepping motor use for printers, electric typewriters,

SSPPEECCIIFFIICCAATTIIOONN

DDIIMMEENNSSIIOONNSS((mmmm))

AAPPPPLLIICCAATTIIOONN :: DSC (Digital Still Camera), Day-night Filter, DSLR Lens

Step angle Volt Resistance Max. Max. Torque(gf cm) Size

Series Phase Drive No Load Slew Pull in Pull out Lead Screw H L Drive[degree] [VDC] [ 7%] Mode Response Speed Holding 800[PPS] 800[PPS] (Height) (Length) Method

[PPS] [PPS]

040S 18° 3.0 20 2 Bipolar 1000 5000 1.5 1.15 1.16 M1.7*0.25P 4.0 7.1

042S 18° 3.0 20 2 Bipolar 1000 5000 - 0.8 0.8 Gear type 4.0 - Constant Voltage

300L 9° 5.0 15 1-2 Bipolar 1000 3000 8 4.0[1200] 4.5[1200] Shaft type 7.5 -

SSPPSS--006655RRFF--004400SSSSPPSS--0044RRFF--110011NN

AAPPPPLLIICCAATTIIOONN :: DVC (Digital Video Camera), Blu-ray

SSPPSS--006655RRFF--003300KK

Step angle Volt Resistance Max. Max. Torque(gf cm) Lead Screw Size

Series Phase Drive No Load Slew Pull in Pull out H L[degree] [VDC] [ 7%] Mode Response Speed Holding [PPS] [PPS] Pitch/Major (Height) (Length)(PPS) (PPS)

100S 18° 5 20 2 Bipolar 1000 5000 2 1.3(1000) 1.4(1000) 0.25 / 2.0 5.2 10

100L 18° 4.5 40 2 Bipolar 1000 4000 3 2.0(800) 2.1(800) - 7.5 -

300M 18° 5 41 2 Bipolar 1000 3000 2 1.2(800) 1.3(800) 0.3 / 1.7 6.0 7.3

Step angle Volt Resistance Max. Max. Torque(gf cm) Lead Screw Size

Series Phase Drive No Load Slew Pull in Pull out Major H L Drive[degree] [VDC] [ 7%] Mode Response Speed Holding 400[PPS] 400[PPS] Pitch Diameter (Height) (Length) Method

[PPS] [PPS]

020LP 18° 3.0 40 2 Bipolar 1000 3000 3 1.49 1.54 0.3 1.7 7.5 11

Constant Voltage030K 18° 5.0 40 2 Bipolar 1000 3000 3 2.60 2.66 0.32 1.6 7.5 27

400L 18° 3.0 40 2 Bipolar 1000 3000 1.2 0.8[525] 0.8[525] 0.2 1.7 7.5 -

061L 18° 5.0 30 2 Bipolar 1000 3000 2 1.0[800] 1.1[800] 0.30 1.7 7.5 23

Pull In Torque Pull Out Torque

SSPPEECCIIFFIICCAATTIIOONN

DDIIMMEENNSSIIOONNSS((mmmm)) CCHHAARRAACCTTEERRIISSTTIICCSS((ggff..ccmm))

Pull In Torque Pull Out Torque

LEAD SCREW TYPE STEP MOTOR

SPS-065RF-Without Bracket Type

SPS-065RF-Bracket Type

CCHHAARRAACCTTEERRIISSTTIICCSS((ggff..ccmm))

SSPPEECCIIFFIICCAATTIIOONN

DDIIMMEENNSSIIOONNSS((mmmm))

AAPPPPLLIICCAATTIIOONN :: Slim Blu-ray Optical pick-up

SPS-04RF-Type

SSPPEECCIIFFIICCAATTIIOONN

DDIIMMEENNSSIIOONNSS((mmmm))

AAPPPPLLIICCAATTIIOONN :: DSC (Digital Steel Camera), Blu-ray

SSPPSS--0088RRGG--001155KKPPAA

SPS-060RF-Type

Step angle Volt Resistance Max. Max. Torque(gf cm) Lead Screw Size

Series Phase Drive No Load Slew Pull in Pull out Out H L[degree] [VDC] [ 7%] Mode Response Speed Holding 600PPS 600PPS Pitch/Major Diameter (Height) (Length)

(PPS) (PPS) [mm] [mm] [mm]

18° 3.0 22 2 Bipolar 1600 1200 0.8 0.7 0.7 0.25/1.7 4.0 5.5 14.6101N

SSPPSS--0077RRFF--002222KKGG

06/07

SSPPSS--006600RRFF--110000LLSSPPSS--006600RRFF--330000MM

2

2

ø3

2.2

3.1

7.5 2

(ø6)

3.60.7

0.6

Page 5: roducts Information - COM · 2009. 11. 5. · 1994 Concluded a technical contract with TOSHIBA-TEC 1995 Began manufacturing PM stepping motor use for printers, electric typewriters,

SSPPSS--1100RRFF--111100KK

SSPPSS--1100RRFF--115500KK

DDIIMMEENNSSIIOONNSS((mmmm)) CCHHAARRAACCTTEERRIISSTTIICCSS((ggff..ccmm))

Pull In Torque Pull Out Torque

SSPPEECCIIFFIICCAATTIIOONN

DDIIMMEENNSSIIOONNSS((mmmm))

AAPPPPLLIICCAATTIIOONN :: Super (Ultra) Slim ODD

CCHHAARRAACCTTEERRIISSTTIICCSS((ggff..ccmm))

AAPPPPLLIICCAATTIIOONN :: Camcorder, CCTV Camera

Step angle Volt Resistance Max. Max. Torque(gf cm) Lead Screw Size

Series Phase Drive No Road Slew Pull in Pull out Pitch Complete L[degree] [VDC] [ 7%] Mode Response Speed Holding 600[PPS] 600[PPS] Thread (Lenght)[PPS] [PPS]

110K 18° 5.0 55 2 Bipolar 1100 1500 6.0 2.7 2.98 0.4 16.6 29.6

111K 18° 5.0 55 2 Bipolar 1200 1550 6.0 2.67 2.91 0.4 7.6 20.6

Pull In Torque Pull Out Torque

SSPPEECCIIFFIICCAATTIIOONN

DDIIMMEENNSSIIOONNSS((mmmm)) CCHHAARRAACCTTEERRIISSTTIICCSS((ggff..ccmm))

Pull In Torque Pull Out Torque

AAPPPPLLIICCAATTIIOONN :: CCTV Camera, Camcorder, DSC

Step angle Volt Resistance Max. Max. Torque(gf cm) Lead Screw Size

Series Phase Drive No Road Slew Pull in Pull out Pitch Complete L[degree] [VDC] [ 7%] Mode Response Speed Holding 600[PPS] 600[PPS] Thread (Lenght)[PPS] [PPS]

150K 18° 5.0 55 2 Bipolar 1150 1400 6.0 4.02 4.22 0.4 30.0 36.0

151K 18° 5.0 55 2 Bipolar 1150 1200 6.0 3.75 3.76 0.4 12.0 18.0

152K 18° 5.0 55 2 Bipolar 1300 1500 6.0 4.98 4.50 0.4 33.7 37.8

153K 18° 5.0 55 2 Bipolar 1300 1500 6.0 4.36 4.08 0.4 22.2 26.3

SSPPEECCIIFFIICCAATTIIOONN

SPS-07RG-Type

SSPPEECCIIFFIICCAATTIIOONN

DDIIMMEENNSSIIOONNSS((mmmm))

AAPPPPLLIICCAATTIIOONN :: Slim ODD

CCHHAARRAACCTTEERRIISSTTIICCSS((ggff..ccmm))

Step angle Volt Resistance Max. Max. Torque(gf cm) Lead Screw Size

SeriesStep

Drive No Road Slew Pull in Pull out Complete L Drive[degree] [VDC] [ 7%]

AccuracyMode Response Speed Holding

400[PPS] 1600[PPS] Pitch Thread (Length) Method[ ] [PPS] [PPS]

111 22.5° 4.0 13 - Bipolar 1000 3000 6.0 5.0 3.4 2.0 44 44.5

111L 22.5° 4.0 13 25 Bipolar 1000 3000 5.0 4.0 3.0 2.0 44 44.5

030KPL 22.5° 4.0 13 25 Bipolar 1000 3000 5.0 4.0 3.0 1.6 45 45.2

026FA 22.5° 4.0 15 - Bipolar 1050 3100 6.0 3.5 3.2 2.0 45 46.0 Constant Voltage

223HFA 22.5° 4.0 15 Bipolar 1050 3100 6.0 3.5 3.2 2.0 45 46.0

223HLBA 22.5° 4.0 15 25 Bipolar 1050 3100 6.0 3.5 3.2 2.0 45 46.0

225FA 22.5° 4.0 15 - Bipolar 1050 3100 6.0 3.5 3.2 2.0 45 46.0

SSPPSS--0088RRGG--001155KKPPAAPull In Torque Pull Out Torque

SPS-08RG-Type SPS-10RF-Bracket Type

SPS-10RF-Without Bracket Type

Step angle Volt Resistance Max. Max. Torque(gf cm) Lead Screw Size

Series Drive No Load Slew Pull in Pull out Complete L Drive[degree] [VDC] [ 7%] Mode Response Speed Holding 400[PPS] 1600[PPS] Pitch Thread (Length) Method

[PPS] [PPS]030KG 22.5° 4.0 14.5 Bipolar 1000 3000 5 2.0 1.8 1.6 42.6 21.2010KP 22.5° 4.0 14.5 Bipolar 1000 3000 5 2.5 2.0 2.0 Left Hand -

Constant Voltage024KPH 22.5° 4.0 15.7 Bipolar 1000 3000 5 3.0 2.3 2.0 Left Hand -025KPL 22.5° 4.0 15.7 Bipolar 1000 3000 5 3.0 2.5 2.0 Left Hand -026LA 22.5° 4.0 15.7 Bipolar 1000 3000 5 3.0 2.5 2.0 Left Hand -

SSPPSS--0077RRFF--002222KKGG

08/09

LEAD SCREW TYPE STEP MOTOR

Page 6: roducts Information - COM · 2009. 11. 5. · 1994 Concluded a technical contract with TOSHIBA-TEC 1995 Began manufacturing PM stepping motor use for printers, electric typewriters,

SPS-15RF-Bracket Type

SSPPSS--1155RRFF--004422KK

SSPPEECCIIFFIICCAATTIIOONN

DDIIMMEENNSSIIOONNSS((mmmm))

AAPPPPLLIICCAATTIIOONN :: FDD

CCHHAARRAACCTTEERRIISSTTIICCSS((ggff..ccmm))

Pull In Torque Pull Out Torque

Step angle Volt Resistance Max. No Max. Torque(gf cm) Lead Screw

Series Phase Drive Road Slew Pull in Pull out Pitch L1 L2 Note[degree] [VDC] [ 7%] Mode Response Speed Holding 400[PPS] 1400[PPS](Complete (FPC)

[PPS] [PPS] Thread)

042K 18° 4.5 16 2 Bipolar 960 - 26 10.15 12.29 0.1876 28.8(Over19.8) 37.5

340K-P 18° 4.5 24 2 Bipolar 750 - 24 7.0 - 0.1876 29.08(Over22.3) 42.85V CONSTANT

SPS-15RF-Without Bracket Type

SSPPSS--1155RRFF--117722KKPP

AAPPPPLLIICCAATTIIOONN :: ODD, DVD-P, DVD-Recorder

SSPPEECCIIFFIICCAATTIIOONN

DDIIMMEENNSSIIOONNSS((mmmm))CCHHAARRAACCTTEERRIISSTTIICCSS((ggff..ccmm))

Pull In Torque Pull Out Torque

Step angle Volt Resistance Max.No Max. Torque(gf cm) Lead Screw Size

Series Phase Drive Road Slew Holding Pull in Pull out Pitch Complete L2 Drive[degree] [VDC] [ 7%] Mode Response Speed [gf cm] 600[PPS] 600[PPS] Thread (Lenght) method

[PPS] [PPS]

231KP 18° 4.5 5 2 Bipolar 1000 2000 25 15.0 22.9 3 52.00 59.20 Constant Voltage

153KP 18° 4.5 10 2 Bipolar 1000 1700 40 19.0 24.3 4.5 52.00 59.20 Constant Voltage

153L 18° 4.5 10 2 Bipolar 950 1700 30 9.0 13.0 4.5 52.00 59.00 Constant Voltage

092KP 18° 4.5 10 2 Bipolar 900 1700 25 15.0 21.3 3 44.80 52.00 Constant Voltage

172KP 18° 4.5 10 2 Bipolar 1050 2000 25 15.0 20.5 3 46.38 53.58 Constant Voltage

173KP 18° 12 16 2 Bipolar 800 2500 18 10.0 16.8 3 46.38 53.58 PWM

360KP 18° 12 18 2 Bipolar 1100 3000 20 15.5 17.9 3 50.00 57.00 PWM333KP 18° 12 28 2 Bipolar 800 2000 30 19.0 25.7 3 47.20 54.00 PWM

SSPP--1100RRFF--001100

Voltage Resistance Max. Max. Torque(gf cm) Pinion Lead Wire Ass’y

Series Step Phase Drive No Load Slew Holding Pull in Pull out Housingangle [VDC] [ 7%] Mode Response Speed [gf cm] [PPS] [PPS] Module PCD Z Terminal L/W L[mm]

[PPS] [PPS]

010 18° 5 14 2-2 Bipolar 950 1350 10 4.5 - SPUR GEAR Without lead wire(666)

061 18° 5 8.1 2 Bipolar 1200 2500 8 5 8 BsBm Without lead wire(750) (750]

SSPPEECCIIFFIICCAATTIIOONN

DDIIMMEENNSSIIOONNSS((mmmm))

AAPPPPLLIICCAATTIIOONN :: CCTV Camera

CCHHAARRAACCTTEERRIISSTTIICCSS((ggff..ccmm))

Pull In Torque Pull Out Torque

SP-10RF-Type

SSPP--1155RRFF--007700KK

DDIIMMEENNSSIIOONNSS((mmmm))

SP-15RF-Type (H=10.8)

Step Voltage Resistance Max. Max. Torque(gf cm) Pinion Lead Wire Ass’y

Series angle Phase Drive No Load Slew Holding Pull in Pull out Housing[VDC] [ 7%] Mode Response Speed [gf cm] [PPS] [PPS] Module PCD Z Terminal L/W L[mm][degree]

[PPS] [PPS]010K 7.2 30 600 - 24 - 18(600) 0.25 Ø3.5 14 FPC(PIE) Coverlay 39.5012K 5 12 1030 - 40 - 13(800) 0.25 Ø4.25 17 None

015K 8.5 20 1050 - 40 - 20/16 0.3 Ø4.2 14 MOLEX 5264-04P UL1007 110Bipolar (800/1000) MOLEX 5263 PBT AWG#26070K 18 7.2 30 2-2 V 800 - 24 - 16(800) 0.25 Ø3.5 14 None

080K 7.2 17.7 Const 1100 - 35 - 19.4(800) 0.3 Ø4.8 16 MOLEX 51021-0900 UL1685 165MOLEX 50058-8000 AWG#30210 8.5 43 980 1200 32 - 7(1200) None None600K 5 30 700 - 25 - 8(800) 0.35 Ø4.55 13 FPC (SPS15RF 100K ) 45

AAPPPPLLIICCAATTIIOONN :: Mini Printer, Photo Printer, Camera, DVD-Recorder, Medical Instrument, etc

SSPPEECCIIFFIICCAATTIIOONN

CCHHAARRAACCTTEERRIISSTTIICCSS((ggff..ccmm))

10/11

PINION TYPE STEP MOTORLEAD SCREW TYPE STEP MOTOR

Pull In Torque Pull Out Torque

Page 7: roducts Information - COM · 2009. 11. 5. · 1994 Concluded a technical contract with TOSHIBA-TEC 1995 Began manufacturing PM stepping motor use for printers, electric typewriters,

Step Voltage Resistance Max. Max. Torque(gf cm) Pinion Lead Wire Ass’y

Series angle Phase Drive No Load Slew Holding Pull in Pull out Housing[degree] [VDC] [ 7%] Mode Response Speed [gf cm] [PPS] [PPS] Module PCD Z Terminal L/W L[mm]

[PPS] [PPS]

25RD-030 24 65 900 1500 200 - 110/95 0.4 Ø4.8 12 JST PHR-6 UL1061 80Unipolar (900/95) SHP-002T-P0.5S AWG#28

25RD-031 24 60.5 V Const 900 1500 150 - 110 0.5 Ø8.0 16 JST PHR-6 UL1061 2207.5

(750) SHP-002T-P0.5S AWG#28

25RD-200 24 33Bipolar

1150 1950 120 - 90 None NoneA Const (1100)(200mA)

25RD-500 24 50 2-2 950 1800 280 - 140 0.4 Ø6.0 15 - UL1061 108(600) AWG#26

25RE-300 15 70 Unipolar 435 1020 100 50(200) 27(700) 0.3 Ø7.2 24 JST XHP-6N UL1061 52015 V Const SXH-001T-P0.6 AWG#28

25RE-400 15 60 440 1150 110 60 30/60 0.3 Ø7.2 24 JST XHP-6N UL1095 510(200) (700/400) SXH-001T-P0.6 AWG#26

Step Voltage Resistance Max. Max. Torque(gf cm) Pinion Lead Wire Ass’y

Series angle Phase Drive No Load Slew Holding Pull in Pull out Housing[degree] [VDC] [ 7%] Mode Response Speed [gf cm] [PPS] [PPS] Module PCD Z Terminal L/W L[mm]

[(PPS] [PPS]

010K 7.2 250 Bipolar 150 - 100 - 9(850) None MOLEX 5264-0400 UL1061 120V Const MOLEX 5263-4000 AWG#28

020K 7.2 13 650 - 85 - 20(900) 0.3 Ø4.2 14 FPC(PIE) Coverlay 64

300K 24 12Bipolar

1250 - 85 - 45 0.3 Ø4.8 16 MOLEX 51021-1000 UL1061 165A Const (1600) MOLEX 50058-8000 AWG#28(350mA)

060K 5 13 Bipolar 650 - 85 - 30 0.3 Ø4.8 16 MOLEX 51021-1000 UL1061 16518 2-2 V Const (400) MOLEX 50058-8000 AWG#28

072 24 20Bipolar

2500 - 85 - 70 0.4 Ø8 20 None UL1061 45A Const (1050) AWG#28(350mA)

080K 7.2 5 850 - 40 - 9.5 0.3 Ø4.8 16 MOLEX 51021-0900 UL1061 165Bipolar (1360) MOLEX 50058-8000 AWG#28

090K 24 20V Const

1800 - 80 - 50 0.5 Ø9.0 18 None UL1061 50(1200) AWG#28

SP-20RF-Type (H=19.2)

SSPPEECCIIFFIICCAATTIIOONN

DDIIMMEENNSSIIOONNSS((mmmm))

AAPPPPLLIICCAATTIIOONN :: Mini Printer

CCHHAARRAACCTTEERRIISSTTIICCSS((ggff..ccmm))

SSPP--2200RRFF--006600KK

2000

5040302010

Torq

ue(g

f·cm

)

frequency rate (PPS)

60

8070

90

400300 500 600 700 800

AAPPPPLLIICCAATTIIOONN :: Mini Printer, Type Writer, etc

SSPP--2255RREE--440000

Pull In Torque Pull Out Torque

SSPPEECCIIFFIICCAATTIIOONN

DDIIMMEENNSSIIOONNSS((mmmm))CCHHAARRAACCTTEERRIISSTTIICCSS((ggff..ccmm))

Pull In Torque Pull Out Torque

SP-25-Type (H=13.0)

Step Voltage Resistance Max. Max. Torque(gf cm) Helical Gear Lead Wire Ass’y

Series angle Phase Drive No Load Slew Holding Pull in Pull out Housing[degree] [VDC] [ 7%] Mode Response Speed [gf cm] [PPS] [PPS] Module PCD Z Terminal L/W L[mm]

[PPS] [PPS]

800S 3.75 24 23 1-2Bipolar

1100 10000 62 45 41 0.4 Ø4.4 11 MOLEX 51004-0400UL1007

270A Const (500) (2441) AWG#26(RMS200mA)

SSPP--3355RRCC--880000SS

SSPPEECCIIFFIICCAATTIIOONN

DDIIMMEENNSSIIOONNSS((mmmm))

AAPPPPLLIICCAATTIIOONN :: Scanner

CCHHAARRAACCTTEERRIISSTTIICCSS((ggff..ccmm))

0

20.010.0

500 1000 1500 2000 2441 2500 3000 3500 4000 4500 5000

30.0Torq

ue(g

f·cm

)

frequency rate (PPS)

40.0

60.050.0

70.0

SP-35RC-SLIM Type (H=8.4)

Pull In Torque Pull Out Torque

SP-35-SLIM Type (H=15)

CCHHAARRAACCTTEERRIISSTTIICCSS((ggff..ccmm))

200 3000

10050

150

Torq

ue(g

f·cm

)

frequency rate (PPS)

200

300250

350400

400 500 600 700 800

Pull In Torque Pull Out Torque

SSPP--3355RRFF--004400KKSS

DDIIMMEENNSSIIOONNSS((mmmm))

Step Voltage Resistance Max. Max. Torque(gf cm) Pinion Lead Wire Ass’ySeries angle Phase Drive No Load Slew Holding Pull in Pull out Housing

[degree] [VDC] [ 7%] Mode Response Speed [gf cm] [PPS] [PPS] Module PCD Z Terminal L/W L[mm][PPS] [PPS]

35RF-010KS 83 Unipolar 650 850 420 - 180 0.4 Ø8.0 20 None UL1007 130V Const (500) AWG#26

35RD-030KS 13Bipolar

700 1300 400 - 260 0.4 Ø4.8 12 HAN LIM CH 0500-04 UL1007 8024

A Const (800) CT0500 AWG#26(300mA)

35RD-031KS 50 700 900 500 350 360 0.5 Ø7.5 15 JST PHR-6 UL1007 110(150) (400) SHP-002T-P0.5S AWG#26

35RF-040KS 7.5 60 900 1700 255 - 120 0.5 Ø8.0 16 AMP175778-6 UL1007 310(500) AWG#26

35RD-300S 12 362-2

600 - 400 180 180 0.35 Ø3.5 10 XMR-09V UL1007 350Unipolar (333) (333) SXM-001T-P0.6 AWG#26

35RD-400S 140 V Const 200 350 100 - 50 0.5 Ø9.0 18 AMP 173977-5 UL1061 50(300) AWG#26

35RD-410S 24 260 340 350 100 - 105 0.5 Ø9.0 18 AMP 173977-5 UL1061 57(300) AWG#26

35RC-600S 3.75 60 500 4000 140 - 100/60 0.5 Ø7.8 13 MOLEX 51004-0600 UL1061 270(610/1220) MOLEX 50011-8000 AWG#26

SSPPEECCIIFFIICCAATTIIOONN

AAPPPPLLIICCAATTIIOONN :: Mini Printer, Copier, Facsimile, Printer, etc12/13

PINION TYPE STEP MOTOR

Page 8: roducts Information - COM · 2009. 11. 5. · 1994 Concluded a technical contract with TOSHIBA-TEC 1995 Began manufacturing PM stepping motor use for printers, electric typewriters,

Step Voltage Resistance Max. Max. Torque(gf cm) Pinion Lead Wire Ass’y

Series angle Phase Drive No Load Slew Holding Pull in Pull out Housing[degree] [VDC] [ 7%] Mode Response Speed [gf cm] [PPS] [PPS] Module PCD Z Terminal L/W L[mm]

[PPS] [PPS]

260S 7.5 17 2.3 1-2Bipolar

1600 10000 240 - 133 /63 - - - - - -A Const (1500/7500)(600mA)

SP-35RD-SLIM Type (H=15.2)

SSPP--3355RRDD--226600SS

501500 2500 3500 4500 5500 6500 7500 8000

9070

110

Torq

ue(g

f·cm

)

frequency rate (PPS)

130

170150

190210230

AAPPPPLLIICCAATTIIOONN :: Printer, Mini Printer

SSPPEECCIIFFIICCAATTIIOONN

DDIIMMEENNSSIIOONNSS((mmmm))CCHHAARRAACCTTEERRIISSTTIICCSS((ggff..ccmm))

Pull Out Torque

SP-35-Type (H=12.2)

Step Voltage Resistance Max. Max. Torque(gf·cm) Pinion Lead Wire Ass’y

Series angle Phase Drive No Load Slew Holding Pull in Pull out Housing[degree] [VDC] [ 7%] Mode Response Speed [gf cm] [PPS] [PPS] Module PCD Z Terminal L/W L[mm]

[PPS] [PPS]

170KA 24 60 500 700 550 300 320 0.4 Ø6.8 17 MOLEX 5264-06 UL1007 300(300) (300) AWG#26

180KA 24 80 650 700 600 370 380 0.4 Ø7.2 17 GIL-S-6S UL1007 200(200) (200) GIL-S-C2-15000 AWG#26

050KA 24 40 900 2060 400 - 260 0.5 Ø10 20 AMP175778-6 UL1007 2007.5 2-2 Unipolar (500) AWG#26

070KA 15 60V Const

480 580 280 185 113 0.5 Ø6.0 12 JST XHP-6N UL1007 460(200) (500) JST-SHX-001T-P0.6 AWG#26

080KA 15 35 520 700 300 215 140 0.4 Ø7.2 18 JST XHP-6N UL1007 670(145) (400) JST-SHX-001T-P0.6 AWG#26

300KA 15 60 480 580 280 185 113 - - - UL1007 340(200) (500) AWG#26

SSPPEECCIIFFIICCAATTIIOONN

AAPPPPLLIICCAATTIIOONN :: Printer, Type Writer, Copier, Mini Printer

CCHHAARRAACCTTEERRIISSTTIICCSS((ggff..ccmm))

SSPP--3355RRFF--005500KKAA

200 3000

50100

Torq

ue(g

f·cm

)

frequency rate (PPS)

150

250200

300350

400 500 600 700

SSPPEECCIIFFIICCAATTIIOONN

DDIIMMEENNSSIIOONNSS((mmmm))

AAPPPPLLIICCAATTIIOONN :: Mini Printer, etc

CCHHAARRAACCTTEERRIISSTTIICCSS((ggff..ccmm))

Step Voltage Resistance Max. Max. Torque(gf cm) Pinion Lead Wire Ass’y

Series angle Phase Drive No Load Slew Holding Pull in Pull out Housing[degree] [VDC] [ 7%] Mode Response Speed [gf cm] [PPS] [PPS] Module PCD Z Terminal L/W L[mm]

[PPS] [PPS]

35RD-200S 20.4 10.4Bipolar

- 135A Const

1200 1500(1588)

None None(460mA)

35RD-210S 19 5.2Bipolar

- 1807.5 2-2

A Const360 (1234)(460mA)

35RD-230S 24 60 Unipolar 830 900 260 270 0.4 Ø6.4 16 JST PHR-6 UL1007 225V Const (150) (150) SHP-002T-P0.5S AWG#28

35RD-240S 24 5.2Bipolar

1200 1500 - 180 None NoneA Const (1234) (460mA)

1000

10050

150

Torq

ue(g

f·cm

)

frequency rate (PPS)

250200

300350

300 350 400

SSPP--3355RRDD--223300SS

SP-35RD-LONG Type (H=21.5)

DDIIMMEENNSSIIOONNSS((mmmm))

Pull In Torque Pull Out Torque

SP-42RD-SLIM Type (H=14.6)

Pull In Torque Pull Out Torque

AAPPPPLLIICCAATTIIOONN :: Printer, etc

SSPPEECCIIFFIICCAATTIIOONN

DDIIMMEENNSSIIOONNSS((mmmm)) CCHHAARRAACCTTEERRIISSTTIICCSS((ggff..ccmm))

Step Voltage Resistance Max. Max. Torque(gf cm) Pinion Lead Wire Ass’ySeries angle Phase Drive No Load Slew Holding Pull in Pull out Housing

[degree] [VDC] [ 7%] Mode Response Speed [gf cm] [PPS] [PPS] Module PCD Z Terminal L/W L[mm][PPS] [PPS]

010S Unipolar - 230 0.5 Ø9.5 19 MOLEX 51004-0600 8012 A Const 600 1800 540

(1200) MOLEX 50011-8000

011S2-2

(450mA) - 230 0.5 Ø7.0 14 MOLEX 51004-0600 1807.5 24 (1200) MOLEX 50011-8000 UL1061

Unipolar 120 320 JST PHR-6 AWG#26020S 16 A Const 700 1400 650 (800) (1000) 0.4 Ø5.6 14 SHP-002T-P0.5S(500mA) 120

030S 30 1-2 Unipolar 1800 3300 900 - 520 0.5 Ø7.5 15 JST PHR-6 UL1007V Const (400) SHP-002T-P0.5S AWG#26

SSPP--4422RRDD--001100SS

300 6000

100

Torq

ue(g

f·cm

)

frequency rate (PPS)

300

200

400

500

900 1200 1500 1800

Pull In Torque Pull Out Torque

14/15

PINION TYPE STEP MOTOR

Page 9: roducts Information - COM · 2009. 11. 5. · 1994 Concluded a technical contract with TOSHIBA-TEC 1995 Began manufacturing PM stepping motor use for printers, electric typewriters,

SP-42RD-MIDDLE Type (H=18)

SSPPEECCIIFFIICCAATTIIOONN

DDIIMMEENNSSIIOONNSS((mmmm))CCHHAARRAACCTTEERRIISSTTIICCSS((ggff..ccmm))

Pull In Torque Pull Out Torque

Step Voltage Resistance Max. Max. Torque(gf cm) Pinion Lead Wire Ass’y

Series angle Phase Drive No Load Slew Holding Pull in Pull out Housing[degree] [VDC] [ 7%] Mode Response Speed [gf cm] [PPS] [PPS]

Module PCD Z Terminal L/W L[mm][PPS] [PPS]

100M 24 120 Unipolar 870 1200 610 480 - 0.6 Ø8.4 14 MOLEX 51004-0600 UL1007 275V Const (200) MOLEX 50011-8000 AWG#26Unipolar MOLEX 51004-0500 UL1007110M 7.5 17 13 1-2 A Const 1000 1700 610 - 479 0.4 Ø6.4 16

MOLEX 50011-8000 AWG#26135

(300mA) (1000)

42HD-120M 24 80 Unipolar 800 1800 800 - 350 0.6 Ø8.4 14 MOLEX 53015-0610 None(PCB)V Const (400) SHP-002T-P0.5S

140M 3.75 24 5.8 2-2Bipolar

650 4000 550 -140

0.5 Ø9.0 18 MOLEX 51004-0400 UL1007 285A Const (1410)MOLEX 50011-8000 AWG#26(400mA)

1000

100

200

Torq

ue(g

f·cm

)

frequency rate (PPS)

400

300

500

600

200 267 400 600

AAPPPPLLIICCAATTIIOONN :: MFP, Printer, Copier, Facsimile, etc

SSPP--4422HHDD--112200MMAA

SP-42RD-LONG Type (H=H23)DDIIMMEENNSSIIOONNSS((mmmm))

SSPPEECCIIFFIICCAATTIIOONN

AAPPPPLLIICCAATTIIOONN :: Printer, Facsimile, Book Binding Machine, Mini Printer, Copier, etc

CCHHAARRAACCTTEERRIISSTTIICCSS((ggff..ccmm))

500 600 700 795 800 900 1000 11000

200400

600

800

1000

120014001600

1800

2000

Torq

ue(g

f·cm

)

frequency rate (PPS)

AAPPPPLLIICCAATTIIOONN :: LBP (Laser Beam Printer)

SP-55RD-Type (H=30)

SSPPEECCIIFFIICCAATTIIOONN

DDIIMMEENNSSIIOONNSS((mmmm)) CCHHAARRAACCTTEERRIISSTTIICCSS((ggff..ccmm))

Pull Out Torque

Step Voltage Resistance Max. Max. Torque(gf cm) Helical Gear Lead Wire Ass’y

Series angle Phase Drive No Load Slew Holding Pull in Pull out Connector[degree] [VDC] [ 7%] Mode Response Speed [gf cm] [PPS] [PPS]Module PCD Z L/W L[mm]

[PPS] [PPS]

100 7.5 24 5.6 2-2Bipolar

467 1031 2100 - 1490 0.5 Ø8.5 17 Molex 53015-0410 - -A Const (795)(1.2A)

Step Voltage Resistance Max. Max. Torque(gf cm) Pinion Lead Wire Ass’ySeries angle Phase Drive No Load Slew Holding Pull in Pull out Housing

[degree] [VDC] [ 7%] Mode Response Speed [gf cm] [PPS] [PPS] Module PCD Z Terminal L/W L[mm][PPS] [PPS]

041L 20 500 550 S2M Ø7.64 12 AMP 179228-6

1-2Unipolar

1600 2000 1000(1000) (1000) AMP 175227-1

100043L 30 V Const 320 380/100 0.5 Ø8.0 16 AMP 179228-6 UL1007

(1200) (1200/1800) AMP 175227-1 AWG#26

100L 6.3Bipolar

700 1200 750 450 300 0.5 Ø8.0 16 GIL-S-4S-S2C2 8024

A Const (800) (1000) GIL-S-C2-S-10000(440mA)7.5 2-2 Unipolar 720/610200L 10.4 A Const 500 900 1000 - (582/848) 0.8 Ø7.2 9 AMP 175487-6 None

(600mA)

800L 9.3Unipolar

1600 3000 1000 300 350 0.5 Ø7.5 15 JST PHR-6 UL1007 1201-2

A Const (1600) (2200) SHP-002T-P0.5S AWG#26(900mA)

118 12 120 Unipolar 600 700 300 - 67 0.4 Ø4.8 12 YLP-06V UL3266 400V Const (350) SYF-01T-P0.5A AWG#26

SSPP--4422RRDD--220000LL

SSPP--5555RRDD--110000

500 5500

200

Torq

ue(g

f·cm

)

frequency rate (PPS)

600

400

800

1000

580 600 650 700

Pull In Torque Pull Out Torque

16/17

PINION TYPE STEP MOTOR

Page 10: roducts Information - COM · 2009. 11. 5. · 1994 Concluded a technical contract with TOSHIBA-TEC 1995 Began manufacturing PM stepping motor use for printers, electric typewriters,

GGSSPP--2244RRWW--0011 GGSSPP--2244RRWW--0022

GGSSPP--2244RRWW--003311 GGSSPP--2244RRWW--004400

Stepangle Voltage Resistance Max. Max. Torque(gf cm) Lead Wire Ass’y

Series [degree] Phase Drive No Load SlewPull in

Contact

(In Output) [VDC] [ 7%] Mode Response Speed 100[PPS]

Friction Detent HousingTerminal

L[mm][PPS] [PPS]

G 5.625。/64 1-2 900 550 350 400~2000 300H 11.25。/64

122-2 300

Unipolar400 275 350 1000 102

Without lead wire06 5.625。/64

1-21000 600 300 1000~2000 300

J 5.625。/64 380 800 550 306 408~2040 255~714

GGSSPP--2244SSWW--HH GGSSPP--2244SSWW--0066

Step angle Voltage Resistance Max. Max. Torque(gf cm) Lead Wire Ass’y

Series [degree] Phase Drive No Load Slew Pull in Contact

(In Output) [VDC] [ 7%] Mode Response Speed 100[PPS] Friction Detent Housing Terminal L[mm][PPS] [PPS]

01 300 650 700~2000012 190 750 1000~2000 Without lead wire02 5.625。/64 300

700 400600 700~2000 600

022 1-2 300 600 700~2000 SMH-250-05 YST-025 350+20023D

12190

Unipolar750 1000~2000 Without lead wire

031 5.625。/64 70 1000 500 600 1000~2000 200040 5.625。/64 300 1000 800 500 1000~2000 JST,XHP-6 JST,SXH-002T-0.6 230+5

2011.25。/64

70 600 400 600 1000~2000 600 SMH-250-05 YST-025 310±202-2

(400PPS)

40 140 400 350 700 700~3000 8283-05 8283 70+10(260PPS) (ELCO)

SSPPEECCIIFFIICCAATTIIOONN

AAPPPPLLIICCAATTIIOONN :: Air Conditioner

AAPPPPLLIICCAATTIIOONN :: Air Conditioner, Bidet, Air Cleaner, Automobile

SSPPEECCIIFFIICCAATTIIOONN

DDIIMMEENNSSIIOONNSS((mmmm))

DDIIMMEENNSSIIOONNSS((mmmm))

GSP-24SW-Type (Ferrite Magnet)

GSP-24RW-Type (Nd-Fe-B Magnet)

SD Series

Voltage Current Resistance InsulationCoil Temp. Dieletric Insulation Holding Release Operating Storage

Series classRise Strength Resistance Force Voltage Temperature Temperature

[VDC] [mA](Max) [ 10%] [°C](Max) [mA](Max) [ ](Min) [N](Min) [VDC](Max) [°C] [°C]

MSD5L-01A 5 350(3.5V) 11 Class E 60 1 50 4 4 -20 ~ 60 -40 ~ 80

MSD5L-02B 5 300(4.0V) 15 Class E 60 1 50 4.8 4 -20 ~ 60 -40 ~ 80

MSD5S-01A 5 350(3.5V) 11 Class E 60 1 50 4.2~5.9 3.5 -20 ~ 60 -40 ~ 80

MSD5S-02A 5 400(4V) 12.5 Class E 60 1 50 4.8 4 -20 ~ 61 -40 ~ 81

AAPPPPLLIICCAATTIIOONN :: Slim ODD (Use for Disk Tray’s In & Out)

SSPPEECCIIFFIICCAATTIIOONN

DDIIMMEENNSSIIOONNSS((mmmm))

IM Series

DDIIMMEENNSSIIOONNSS((mmmm))

IRIS METER IR METER

SeriesOperation Voltage Operation Voltage

Open(V) Close(V) Rippie(V) In Out (V) Out In (V)

020 Max 2.5 Min 0.5 Max 0.3 Max 2.7 Max 2.7

IIMM1100--002200

IIRR MMEETTEERR

IIRRIISS MMEETTEERRSSPPEECCIIFFIICCAATTIIOONN

AAPPPPLLIICCAATTIIOONN :: CCTV Camera

18/19

SOLENOID / IRIS METERGEARED TYPE STEP MOTOR

0.5 1 1.5 2 2.35 2.5 2.8

Holding Force vs Voltage

SD-01 Type SD-02 Type

3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.5 5.5

CCHHAARRAACCTTEERRIISSTTIICCSS((ggff..ccmm))

Page 11: roducts Information - COM · 2009. 11. 5. · 1994 Concluded a technical contract with TOSHIBA-TEC 1995 Began manufacturing PM stepping motor use for printers, electric typewriters,

SeriesDrive Voltage Torque Constant Cogging Torque Rated Speed Rated Torque Rated Current Noise Position sensor Magnet type

[VDC] [Nm/A] [gf-cm] [rpm] [mNm] [A] [ (A)] method

BL62E-M01 24 0.096 300 1576 150 1.80 33 Hall Element Rubber

BL62J-M01 24 0.096 300 2200 157 2.80 44 Hall Element Rubber

BL55A-M01 24 0.073 200 1809 100 1.30 33 Hall Element Rubber

BL55K-M01 24 0.073 200 1444 157 2.32 33 Hall Element Ferrite

BL55S-M01 24 0.068 200 1443 - 1.30 40 Hall Element Nd-Fe-B

BL38A-M01 42 0.060 120 800 30 0.54 35 Hall IC Nd-Fe-B

BL38B-M01 42 0.045 9 800 25 0.54 35 Hall IC Rubber

BL24A-M01 24 0.025 9 4100 8 0.18 30 Hall IC Nd-Fe-B

BL24C-M01 24 0.025 9 2865 6.5 0.18 30 Hall IC Nd-Fe-B

BBLL5555 SSeerriieess

BBLL6622 SSeerriieess

BBLL3388 SSeerriieess

BBLL2244 SSeerriieess

BBLL5555SS SSeerriieess

BLDC MOTOR

DDIIMMEENNSSIIOONNSS((mmmm))

SSPPEECCIIFFIICCAATTIIOONN

AAPPPPLLIICCAATTIIOONN :: Laser Printer, HVAC (Heating, Ventilating and Air conditioning), MFP, Copier

20/21

BRUSHLESS DC MOTOR

Page 12: roducts Information - COM · 2009. 11. 5. · 1994 Concluded a technical contract with TOSHIBA-TEC 1995 Began manufacturing PM stepping motor use for printers, electric typewriters,

Item Spec Unit RemarkMotor Type Stepping Motor Ø42

Driving Voltage 12±10% VMotor Resistance 46±3 [

Input Current 260 Max/phase [mA]

WAY 3WAYInlet(1EA), Outlet(2EA)

Mode Pulse 0~54 pulsePIPE Direction Inlet Outlet : 0 [deg]

Operation Pressure 0.8MPa [MPa]Valve Flux 1.5 /h MIN At 0.8MPa

Leakage Flux 150 /min MAX At 0.8MPa

DDIIMMEENNSSIIOONNSS((mmmm))

AAPPPPLLIICCAATTIIOONN :: Refrigerator

SSPPEECCIIFFIICCAATTIIOONN

DDUU2255--001100KK

VVAA3399--001100

Voltage Resistance Max. Max. Torque(gf cm) Lead Wire

Series Step Phase Drive No Load Slew Detent Pull in Noise [dB](A)Angle [VDC] [ 7%] Mode Response Speed Torque [PPS] Pull out L[mm]

[PPS] [PPS] [gf.cm]DU25-010K 7.5 415 400 800 500 1000(300) - 450DU25-011K 7.5 415 Bipolar 400 800 500 1000(300) - 700DU25-020 7.5 12 415 2-2 A Const 400 800 500 1000(300) - 300 35 DU24-011 5.625 300 500 600 500 1000(100) - 220DU24-012 5.625 300 500 600 500 1000(100) - 100

SSPPEECCIIFFIICCAATTIIOONN

AAPPPPLLIICCAATTIIOONN :: Refrigerator

DDUU2255--001111KK

DU-Series

DDIIMMEENNSSIIOONNSS((mmmm))

VA-Series

Linear step actuator

Voltage Current Resistance Phase Excitation Lead Stroke Axial force Detent axial force NoiseSeries

[VDC] [mA] [ ] [mm] [mm] [Kgf] [Kgf] [dB]

GV25RS-01A 24( 10%) 300 51 2-2 Bipolar 1 Max, 11.0 4 4 30

AAPPPPLLIICCAATTIIOONN :: Gas boiler, Office Automation

SSPPEECCIIFFIICCAATTIIOONN

VoltageRotating

Resistance Rated load Rated load Rated loadGear reductionSeries direction

torque current speedratio[VDC] [ ] 10.1[kgf.cm] [A] [mm]

BA55S-M01 18.5V 5% Both sides 5.0 0.3 1.0N.m 1.2 Max 63 10% 1/12.54

AAPPPPLLIICCAATTIIOONN :: Refrigerator

SSPPEECCIIFFIICCAATTIIOONN

DDIIMMEENNSSIIOONNSS((mmmm))

BLDC Actuator

DDIIMMEENNSSIIOONNSS((mmmm))

22/23

ACTUATORSDAMPER UNIT / REFRIGERANT CONTROL VALVE

GGVV2255RRSS--0011AA

BBAA5555SS--MM0011

Page 13: roducts Information - COM · 2009. 11. 5. · 1994 Concluded a technical contract with TOSHIBA-TEC 1995 Began manufacturing PM stepping motor use for printers, electric typewriters,

AET step actuator

HVAC actuator

Item Spec Unit RemarkMotor Type Step Motor Ø35

Driving Voltage 12±10% [V]Motor Resisitance 52±7% [ ]

Input Current 80 [mA] Max.

Output RPM MIN. 3.3 [RPM] Angular velocity:20deg/sec

Output Torque 6 [Kgf-cm] Min.Holding Torque 10 [Kgf-cm] Min.

Gear Reduction Rate 150:1Working Temperature -40~+110 [

Weight 120 [g]

Item Spec Unit RemarkMotor Type Step Motor Ø42

Driving Voltage 12±20% [V]Motor Resisitance 6.4±7% [ ]

Input Current 800 [mA] Max.

Output RPM MIN. 60 [RPM] Angular velocity:360deg/sec

Output Torque 4.5 [Kgf-cm] Min.Holding Torque 8 [Kgf-cm] Min.

Gear Reduction Rate 6:1Working Temperature -40 ~ +180 [

Weight 250 [g] Reference

Item Spec UnitTest voltage 14±0.1 [VDC]

Operating voltage 8~16 [VDC]Drive frequency 200 [Hz]

Drive torque 40 [cNm]Drive speed 1.67 [RPM]

Drive current 150 [mA]Resistance 84 [Ω]

Pull out torque 160 [gf.Cm]Pull-in torque 60 [gf.Cm]

Starting voltage 10 [V DC]Holding torque 100 [cNm]

Duty cycle 100 [%]Gear backlash 1.5 [ ˚ (deg)]

Noise 35 [dB]

AFLS step actuator

AAPPPPLLIICCAATTIIOONN :: Automobile, etc

SSPPEECCIIFFIICCAATTIIOONN DDIIMMEENNSSIIOONNSS((mmmm))

AAPPPPLLIICCAATTIIOONN :: Automobile, etc

SSPPEECCIIFFIICCAATTIIOONN DDIIMMEENNSSIIOONNSS((mmmm))

SSPPEECCIIFFIICCAATTIIOONN DDIIMMEENNSSIIOONNSS((mmmm))

Driving Motor resistance Input current Lock current Output torque Max. stroke Noise voltage

[VDC] [Ω] [mA] [mA] [Kgf-cm] [mm] [dB]

12 8 80 53 4.1 12 38AAPPPPLLIICCAATTIIOONN :: Automobile

VAPS fan motor

Linear step motor

DDIIMMEENNSSIIOONNSS((mmmm))

Active Incar Sensor

DDIIMMEENNSSIIOONNSS((mmmm))

DDIIMMEENNSSIIOONNSS((mmmm))

AAPPPPLLIICCAATTIIOONN :: Automobile, VAPS, Heat exchanger, Radiator, Air purifier, Heat exchanger, Heat radiation equipment

Drive Min. starting Drive current Revolution Air flow Air flow NoiseSeries voltage voltage speed volume velocity

[VDC] [VDC] [mA] [RPM] [CFM] [m/s] [dB]

VF23AN-G02 12( 10%) 9 70 2900 1.2 - 35

VF23DK-G03 12( 10%) 9 60 2100 11 1.2 38

AAPPPPLLIICCAATTIIOONN :: BLDC Fan motor for Automobile

SSPPEECCIIFFIICCAATTIIOONN

SSPPEECCIIFFIICCAATTIIOONN

AAPPPPLLIICCAATTIIOONN :: Actuator for Automobile

SSPPEECCIIFFIICCAATTIIOONN

Operating Rated current Rated RPM "L" Mode "H" Mode Noise Insulation Withstanding voltage resistance voltage[VDC] [mA] [RPM] [RPM] [RPM] [dB] [MΩ] [mA]

12 500 1450±150 720±150 1030±150 45 100 1

24/25

ACTUATORS

DDAA3355--002200

VVVV5555AAAA--SS0011

VVFF2233AANN--GG0022

LLSS3355--001100

VVFF2233DDKK--GG0033

AAMM4422--001100

VVHH3355AAOO--BB0011

Page 14: roducts Information - COM · 2009. 11. 5. · 1994 Concluded a technical contract with TOSHIBA-TEC 1995 Began manufacturing PM stepping motor use for printers, electric typewriters,

Terminology and Characteristics

TERMINOLOGY ■Holding Torque

The maximum torque generated to the counter anexternal torque applied on the output shaft incondition where the motor is at a halt in anexcitation condition.

■Detent TorqueThe maximum torque generated to the counter anexternal torque applied on the output shaft incondition where the motor is at a halt in an non-excitation condition.

■Line A: Pull-in (Starting) CharacteristicShowing the relationship between input frequencyand the maximum torque(pull-in torque) capableof starting the motor at that input frequency

■Line B: Pull-out (Slewing) CharacteristicShowing the relationship between input frequencyand the maximum torque(pull-out torque)obtainable by synchronizing the motor rotationwith that input frequency which is graduallyincreased from the pull-in characteristic rangeafter start of the motor.

■Point C: Max No Load ResponseThe maximum frequency at which the motor canstart and stop, synchronized with input signalsunder a no-load condition.

■Step AccuracyDifference between theoretical and actual stepangle.

Stepping Motor is the motor which rotates a definite angle as the excitation conditionvaries with the input pulse signal.1) The angular velocity of motor is exactly proportional to the number of input pulses.2) The angular error per 1 step is small and the error is not accumulated.3) The responses of stopping and rotating are excellent.4) Open-loop-control is practicable and circuit structure of system is simple.5) It is possible to get low speed driving with a load directly connected to the axis of the motor.6) The control of stop position is possible without break.7) The rotational speed is obtained with proportional to the frequency of pulse signal. And it is possible to

change speed widely from low to high.

CHARACTERISTICS

■Point D: Max Slew SpeedThe maximum frequency at which the motor canrotate in synchronized with the starting frequencywhich is gradually increased toward themaximum starting rate under no-load condition.

■Area E: Pull-in AreaThe responses of start, stop and rotation ispossible in this area. The motor is driven withoutproblems as long as the operating point is foundin this area.

■Area F: Pull-out AreaThe response is possible without losingsynchronization in this area when the load torqueis added above the frequency of pull-in area.

■Rotational Speed The rotational speed(frequency) of stepping motoris normally expressed in pps(pulse per second).The drive frequency and rotational speed has thefollowing relationship. Rotational SpeedRPM(revolution per minute) = Frequency (PPS)×60sec÷(360。/single step angle)

■Hysteresis AccuracyDifference between step angle of CW rotation andCCW rotation.

Index by Applications

*On this page, it is classifying with the representative appliances where the motors are applied.

Other InstrumentsModel Numbering System

SPS 15 RF 172KP

Size of Motor Outer-Diameter

SSeerriieessSPS : Lead Screw Type SP : Pinion Type GSP : Geared Type

Serial NumberRotor Magnet Class & Step angle

- -

Home Appliances Automobile Actuators

AFLS (Adaptive Front-Lighting System) PP2244AET (Adjustable Electronic Thermostat) PP2244HVAC actuator PP2244VAPS fan motor PP2255Active Incae Sensor PP2255Linear step motor PP2255

AV (Audio & Visual) Devices

SPS-04RF-Type PP66SPS-060RF-Type PP66SPS-O65RF-Bracket Type PP77SPS-15RF-Type PP1100SP-10RF-Type PP1111SP-15RF-Type PP1111

Office Automation

HVAC (Heating, Ventilating and Air Conditioning)

BLDC MOTOR PP2200 // 2211Linear step actuator PP2233

Refrigerator

Damper unit PP2222BLDC Actuator PP2233

Computer Devices

SPS-07RG-Type PP88SPS-08RG-Type PP88SPS-15RF-Type PP1100Solenoid PP1199

Printing Devices

SP-15RF-Type PP1111SP-20RF-Type PP1122SP-25-Type PP1122SP-35-Type PP1155SP-42-Type PP1155SP-55RD-Type[H=30] PP1155BLDC MOTOR PP2200 // 2211

Medical Instruments

SP-15RF-Type PP1111

Air Conditioner

GSP-24SW-Type [Ferrite Magnet] PP1188GSP-24RW-Type [Nd-Fe-B Magnet] PP1188RCV PP2222

Digital Camera & Camcoder

SPS-O65RF-Type PP77SPS-10RF-Type PP99SPS-15RF-Type PP1100SP-10RF-Type PP1111SP-15RF-Type PP1111IRIS Meter (IM10-020) PP1199

26/27