ROCK'N ROLL SPECIFICATIONS
1
ROCK'N ROLL Ideal to mould large parts or very large pieces with hight productivity sach as boats, kayaks, silos, etc. The two carriages mould holders while suspended make the rocking movement alternatively. The oven can have from 3 to 5 independent cooking zones depending on the size of the machine. The working cycle is fully automatic and, uniquely, the operations of loading and unloading take place safely at ground level with reduction of the required floor space. ROTOMACHINERY GROUP ROTATIONAL MOULDING TECHNOLOGY POLIVINIL ROTOMACHINERY S.P.A. - Via Crosa, 53 – 28065 Cerano (NO) ITALY Tel. +39 0321 772021 – Fax +39 0321 772027 - [email protected] STP ROTOMACHINERY INC. - 120 PME Street, Sherbrooke – J1C0R2 (QC) CANADA Tel. +1 819 846 2787 – Fax +1 819 846 3096 - [email protected] Technical data, pictures, video and more on www.rotomachinerygroup.com SPECIFICATIONS - High productivity: during the cooling of a cart the other one is in the oven; - Up to 4 airlines for each arm; - Integrated control of the temperature into the mold; - Interface with touch-screen and proprietary software; - Power burner with different fuels. TRM System exclusively done by ROTOMACHINERY Group for the production of articles with different shapes, in small quantity, with 4 stations completely independent. Configuration with 4 arms that alternate in the oven with the utmost freedom even repeatedly, and the machine can work with the same arm without impact on the others. SPECIFICATIONS - Partitioning oven with fixed panels mounted on the carts; - Open cooling stations with blowers on the ground; - Straight/offset arm easily interchangeable; - Indexing of arms position to facilitate the operations; - Transmission with robust gears, driven by AC motors and inverters to control the acceleration and the deceleration; - Possibility to use up to 3 airlines per arm; - Power burner with different fuels; - Proprietary software with touch screen interface. Modèle LONGEUR DIAM. A B C mm. ft. mm. in. in. in. in. mm. mm. mm. 1800 1850 2400 2450 5300 212 2500 100 11000 440 11000 440 6800 7900 272 5300 212 3800 152 11800 472 7200 288 2500 13600 544 7500 300 9700 100 12000 480 11000 440 8500 340 7200 288 3800 152 12800 512 13600 544 10000 400 D in. mm. 7900 9700 316 388 316 388 LRM 1000 - LAB MACHINE Scale reproduction of all the features and characteristics of rotational molding machines. Accurate control of the process and the information made available to allow you to shorten the time of development of the molding parameters of the new material or mold. SPECIFICATIONS - Limited floor dimensions; - Cooking and cooling station only; - Possibility to use up to 3 airlines per arm; - Power burner with different fuels; - Possibility to have the heating power with resistances; - Control system with proprietary software; - User interface with touch screen;
Transcript of ROCK'N ROLL SPECIFICATIONS
ROCK'N ROLLIdeal to mould large parts or very large pieces with hight productivity sach as boats, kayaks, silos, etc.The two carriages mould holders while suspended make the rocking movement alternatively.The oven can have from 3 to 5 independent cooking zones depending on the size of the machine.The working cycle is fully automatic and, uniquely, the operations of loading and unloading take place safelyat ground level with reduction of the required floor space.
ROTOMACHINERYGROUPROTATIONAL MOULDING TECHNOLOGY
POLIVINIL ROTOMACHINERY S.P.A. - Via Crosa, 53 – 28065 Cerano (NO) ITALYTel. +39 0321 772021 – Fax +39 0321 772027 - [email protected]
STP ROTOMACHINERY INC. - 120 PME Street, Sherbrooke – J1C0R2 (QC) CANADATel. +1 819 846 2787 – Fax +1 819 846 3096 - [email protected]
Technical data, pictures, video and more on www.rotomachinerygroup.com
SPECIFICATIONS - High productivity: during the cooling of a cart the other one is in the oven; - Up to 4 airlines for each arm; - Integrated control of the temperature into the mold;- Interface with touch-screen and proprietary software;- Power burner with different fuels.
TRM System exclusively done by ROTOMACHINERY Group for the production of articles with different shapes, insmall quantity, with 4 stations completely independent.Configuration with 4 arms that alternate in the oven with the utmost freedom even repeatedly, and themachine can work with the same arm without impact on the others.SPECIFICATIONS- Partitioning oven with fixed panels mounted on the carts;- Open cooling stations with blowers on the ground; - Straight/offset arm easily interchangeable; - Indexing of arms position to facilitate the operations; - Transmission with robust gears, driven by AC motors and inverters tocontrol the acceleration and the deceleration; - Possibility to use up to 3 airlines per arm; - Power burner with different fuels; - Proprietary software with touch screen interface.
ModèleLONGEUR DIAM. A B C
mm. ft. mm. in. in. in. in.mm. mm. mm.
1800
1850
2400
2450
5300 212 2500 100 11000 440 11000 440 6800 7900272
5300 212 3800 152 11800 472
7200 288 2500
13600 544 7500 300 9700
100 12000 480 11000 440 8500 340
7200 288 3800 152 12800 512 13600 544 10000 400
D
in.mm.
7900
9700
316
388
316
388
LRM 1000 - LAB MACHINE Scale reproduction of all the features and characteristics of rotational molding machines.Accurate control of the process and the information made available to allow you to shorten the time ofdevelopment of the molding parameters of the new material or mold.SPECIFICATIONS- Limited floor dimensions; - Cooking and cooling station only;- Possibility to use up to 3 airlines per arm;- Power burner with different fuels;- Possibility to have the heating power with resistances;- Control system with proprietary software; - User interface with touch screen;
