ROCK COMPLETION TOOL - sumeraca.com€¦ · Contactos USA +1 (832) 5484601 Argentina +54 9 11...

ROCK COMPLETION TOOL

ContactosUSA

+1 (832) 5484601

Argentina

+54 9 11 2155-9605

Venezuela

+58 (414) 6769921

+58 (412) 6863396

EMAIL

[email protected]

API SPECIFICATION

CONTENTS

SAFETY VALVE

RT-SERIES SUBSURFACE SAFETY VALVE ········································································ 1

RV WIRELINE RETRIEVABLE SAFETY VALVES ···························································· 6

BRIDGE PLUG& CEMENT RETAINER

RWBP WIRELINE SET BRIDGE PLUG ································································· 11

RCBP COMPOSITE BRIDGE PLUG ····································································· 13

RMBP MECHANICAL BRIDGE PLUG ·································································· 14

RWRP WIDE RANGE BRIDGE PLUG ··································································· 15

RHMBP HYDRO- MECH SET BRIDGE PLUGS ······················································· 16

RWRB WIRELINE SET BRIDGE PLUGS ( RETRIEVABLE) ········································ 17

RWCR WIRELINE SET CEMENT RETAINER ····························································· 18

RMCR MECHANICAL CEMENT RETAINER ······························································ 19

SETTING TOOLS & TUBING ANCHOR

RSS STINGER SEAL ASSEMBLY ············································································· 20

RWST WIRELINE SETTING TOOLS ···································································· 21

RHST/RHSG HYDRAULIC SETTING TOOLS ························································· 22

RMSB MECHANICAL SETTING TOOL ································································ 23

RMSR MECHANICAL SETTING TOOL ································································ 24

RPSJ SAFETY JOINT & PUMP OUT PLUG ···························································· 25

RTAC TUBING ANCHOR··················································································· 26

PACKER

RHF RETRIEVABLE DOUBLE-GRIP HYDROSTATIC PACKER ····································· 27

RHS-2 HYDRAULIC SETTING PACKERS ·································································· 29

RR-3D DOUBLE GRIP RETRIEVABLE PACKER ························································· 31

RR-3DL LARGE BORE DOUBLE GRIPRETRIEVABLE PACKER ··································· 33

RMLS MECHANICAL SET RETRIEVABLE PRODUCTION PACKER ····························· 34

RASX MECHANICAL SET RETRIEVABLE PRODUCTION PACKERS···························· 36

RAD-1 TENSION PACKERS ··············································································· 37

RTTS PACKERS ····································································································· 39

SPP-XC PERMANENT PRODUCTION PACKERS ························································ 41

SLIDING SLEEVE & NIPPLE

RSSD NON-ELASTOMERIC SLIDING SLEEVES ···················································· 42

RCV XO/XD CIRCULATING SLEEVE ·································································· 43

RCV XA CIRCULATING SLEEVE ········································································ 44

RCV XL CIRCULATING SLEEVE ········································································ 45

RX PROFILE NIPPLE ······················································································· 46

RXN PROFILE NIPPLE ····················································································· 47

RF PROFILE NIPPLE ························································································ 48

RR PROFILE NIPPLE ························································································ 49

ROCK GAS LIFT TOOL

CONVENTIONAL MANDREL ············································································ 51

SIDE POCKET MANDREL ················································································· 53

WIRELINE RETRIEVABLELATCHES ········································································ 54

DUMMY VALVES ········································································································· 55

TUBING-RETRIEVABLE CHEMICAL-INJECTION VALVES ············································ 56

WIRELINE-RETRIEVABLE CHEMICAL-INJECTION VALVES ········································ 57

TUBING-RETRIEVABLE-RETRIEVABLE CHECK VALVES ············································· 58

WATERFLOOD-INJECTION VALVES ············································································· 59

INJECTION PRESSURE-OPERATED WIRELINE-RETRIEVABLE VALVES（IPO） ·· 60

INJECTION PRESSURE-OPERATED TUBING-RETRIEVABLE VALVES (IPO) ··············· 62

SINGLE-POINT-INJECTION WIRELINE-RETRIEVABLE ORIFICE VALVES ····················· 64

PRODUCTION-OPERATED VALVES ············································································· 65

-1-

RT-SERIES SUBSURFACE SAFETY VALVE

RT series subsurface safety valve is a kind of tubing retrievable safety valve which is controlled on the

surface through hydraulic control line. It directly connects to the tubing string as part of production Work

string. After installation, it is operated by the pressure in control line. While certain amount of hydraulic

pressure is applied through the control line to the safety valve, the valve will be open; while the pressure

is released, the safety valve will be closed and the tubing string is closed at the same time.

Features:

The flapper has pressure equalizing type and non-pressure

equalizing type;

Locking and sealing structure are designed at the upper side;

It is highly reliable to use metal to metal sealing style in the sealing chamber;

The upper and bottom thread can be customized according to

customers' requirements.

-2-

SPECIFICATIONS

Part Number

Specification

Tool type

Tool

OD

Seal bore

ID

Piston

volume

Pressure

Depth

Temperature

in in in c.c. psi ft ℉

RSTRS02237000

2 3/8

RT(M)(E)

3.625

1.875

6.5

5000

1300

300

2000

3000

4000

RSTRS03237000

RT

7500

1000

2000

3000

RSTRS04237000

RT(M)(E)

3.5

5.4

9000

1300

2000

4000

RSTRS01237000

3.625

6.5

10000

1300

2000

4000

RSTRS02287000

2-7/8

RT(M)(E)

4.625

2.312

12.0

5000

1200

2000

3000

4000

6500

RSTRS01287000

5.135

12.0

10000

1400

2000

3000

4000

-3-

SPECIFICATIONS

Part Number Specification

Tool type

Tool

OD

Seal bore

ID

Piston

volume Pressure Depth Temperature


RSTRS02350000

3-1/2

RT(M)(E)

5.380

2.812

13.1

5000

400

300

537

1000

1550

2000

3000

4000

4500

5500

RSTRS01350000

RTS(M)(E)

5.650

10.0

10000

6000

9000

RSTRS02450000

4-1/2

RT(E)

7.125

3.812

17.6

5000

820

300

1400

2000

3000

4000

4500

5500

RSTRS03450000 7500 6000

RSTRS04450000 8000 6000

RSTRS01450000 RTM(E) 7.5 20.9 10000 8700

-4-

SPECIFICATIONS

Part Number

Specification Tool type

Tool

OD

Seal bore

ID

Piston



RSTRS02237000

2 3/8

RT(M)(E)

3.625

1.875

6.5

5000

1300

300

2000

3000

4000

RSTRS03237000

RT

7500

1000

2000

3000

RSTRS04237000

RT(M)(E)

3.5

5.4

9000

1300

2000

4000

RSTRS01237000

3.625

6.5

10000

1300

2000

4000

RSTRS02287000

2-7/8

RT(M)(E)

4.625

2.312

12.0

5000

1200

2000

3000

4000

6500

RSTRS01287000

5.135

12.0

10000

1400

2000

3000

4000

-5-

SPECIFICATIONS

Part Number


Tool

OD

Seal bore

ID

Piston



RSTRS02550000

5-1/2

RT(E)

8.375

4.578

20.5

5000

1000

300

2000

3000

4000

RTM(E)

30

1400

1850

2100

2500

3000

5500

6185

RSTRS03550000 5500 1400

RSTRS02700000

7

RTSM(E)

9.2

6.000

38.5

5000

1200

300

2000

3100

4000

4400

6530

RSTRS01700000

6000

2000

4000

RSTRS03700000

7500

2000

3100

RSTRS04700000 9.3 8000 1200

-6-

RV WIRELINE RETRIEVABLE SAFETY VALVES

RV series steel wire recovery safety valve is a ground control steel wire rope recovery underground

safety valve. The modular design of this series of steel wire recovery safety valves improves the

applicability of underground safety valves. Steel wire recovery safety valve is divided into rubber safety

valve and non-rubber safety valve. It can be placed in the tubing recovery safety valve or in the safety

valve section.

Features:

The valve plate has two structural forms: piston with balanced pressure and piston without balanced

pressure.

The steel wire recovery safety valve consists of locking device and safety valve.

The main body can be sealed in different ways: metal-to-metal hard sealing structure to ensure long-

term sealing reliability;

Upper and lower connection button types can provide various air-tight button threads of

corresponding specifications according to customer requirements.

-7-

SPECIFICATIONS

Part Number


Tool OD Tool ID Pressure Depth Temperature

in in in psi ft ℉

RSRVE01238000

2-3/8

RVH(E) 1.710 0.65 10,000 1,560

20-275

RSRVE02238000 RVH(E) 1.810 0.65 10,000 1,560

RSRVE03238000 RVH(E)

1.870

0.65 10,000 1,560

RSRVE04238000 RV(E) 0.807 6000 1,500

RSRVE05238000 RV(E) 0.807 5,000 1,500

RSRVE01288000

2-7/8

RV(E)

2.215

0.807 6,000 1,500

RSRVE02288000 RVH 0.607 10,000 1,000

RSRVE03288000 RVQD 0.575 15,000 1,780

RSRVE04288000 RV(E) 2.188

0.935 10,000 2,500

RSRVE05288000 RVH(E) 0.575 15,000 1,780

RSRVE06288000 RV 2.312

1.125 6,000 1,130

RSRVE07288000 RVH(E) 1.125 10,000 1,130

RSRVE01350000

3 1/2

RV

2.562

1.265 6,000 1,000

RSRVE02350000 RVH(E) 1.265 10,000 2,500

RSRVE03350000 RVD(E) 1.265 6,000 10,000

RSRVE04350000 RVDQ 0.995 15,000 2,130 20-350

RSRVE05350000 RV(E)

2.750

1.265 6,000 1,000

20-275 RSRVE06350000 RVH(E) 1.265 10,000 2,500

RSRVE07350000 RVD(E) 1.265 6,000 10,000

RSRVE08350000 W(E) 1.56 5,000 3,000 20-300

RSRVE09350000 RV(E)

2.812

1.56 6,000 1,000 20-275

RSRVE10350000 RVH(E) 1.265 10000

2,500 20-300

RSRVE11350000 RVHD(E) 1.25 4,000

RSRVE12350000 RVD(E) 2.812

1.265 6,000 10000 20-300

RSRVE13350000 RW(E) 1.56 5,000 3000

-8-

SPECIFICATIONS

Part Number

specification

Tool type


in in in psi ft ℉

RSRVE01450000

4 1/2

RV(E) 3.250 1.56 5,000 1,000

177

RSRVE02450000 RV(E) 3.437 1.56 5,000 1,000

RSRVE03450000 RV(E)

3.680

1.97 6,000 1,968

RSRVE04450000 RVH(E) 1.97 10,000 1,070

RSRVE05450000 RVHD(E) 1.96 10,000 2,100

RSRVE06450000 RWS(E) 2.100 10,000 2,000 232

RSRVE07450000 RWS(E) 2.100 15,000 2,000

RSRVE08450000 RV(E)

3.750

1.97 6,000 1,071 177

RSRVE09450000 RVHD(E) 1.96 10,000 2,100

RSRVE10450000 RWS(E) 2.100 10,000 2,000 231

RSRVE11450000 RWS(E) 2.100 15,000 2,000

RSRVE12450000 RV(E)

3.812

2.122 6,000 2,200

232

RSRVE13450000 RVH(E) 2.122 7,500 1,000

RSRVE14450000 RVHD(E) 1.960 10,000 2,100

RSRVE15450000 RVD(E) 2.500 5,000 2,200

RSRVE16450000 RWS(E) 2.100 10,000 2,000 177

RSRVE17450000 RWS(E) 2.100 15,000 2,000

-9-

SPECIFICATIONS

Part Number

specification

Tool type


in in in psi ft ℉

RSRVE01550000

5-1/2

RV(E)

4.125

2.122 6,000 1,400

20-275

RSRVE02550000 RVHD(E) 1.960 10,000 2,500

RSRVE03550000 RVH(E) 2.380 5,000 2,000

RSRVE04550000 RV(E)

4.31

2.100 6,000 2,087

RSRVE05550000 RVHD(E) 2.100 7,500 1,600

RSRVE06550000 RVH(E) 1.960 10,000 2,100

RSRVE07550000 RWS(E) 2.100 10,000 2,000 80-450

RSRVE08550000 RWS(E) 2.100 15,000 2,000


4.43

2.101 9,000 2,001

20-275 RSRVE10550000 RVD(E) 2.562 6,500 2,390

RSRVE11550000 RVD(E)S 3.062 5,000 2,000

RSRVE12550000 RWS(E) 2.100 10,000 2,000 80-450

RSRVE13550000 RWS(E) 2.100 15,000 2,000

RSRVE14550000 RV(E)

4.56

2.562 6,000 1,000

20-275

RSRVE15550000 RVH(E) 2.100 10,500 2,087

RSRVE16550000 RVD(E) 2.562 5,000 3,000

RSRVE17550000 RWD(E)S 3.062 6,000 2,000

RSRVE18550000 RWS(E) 2.100 5,000 2,000 80-450

RSRVE19550000 RWS(E) 2.100 15,000 2,000

RSRVE20550000 RV(E) 4.578 2.562 6,000 1,000

20-275 RSRVE21550000 RVD(E) 4.625 2.562 6,000 2,000

RSRVE22550000 RV(E) 4.750 2.562 6,000 1,000

-10-

SPECIFICATIONS

Part Number



in in in psi ft ℉

RSRVE01700000

7

RV(E)

5.75

3.265 6,000 1,030

20-275

RSRVE02700000 RVH(E) 3.265 9,000 1,100

RSRVE03700000 RVHD(E) 3.375 8,000 2,000

RSRVE04700000 RWD(E)S 4.115 5,000 1,200

RSRVE05700000 RWS(E) 3.245 13,500 2,000 80-350

RSRVE06700000 RWS(E) 5.812 3.245 10,000 2,000 40-350

RSRVE07700000 RV(E)

5.875

3.265 6,000 1,149

20-275

RSRVE08700000 RVHD(E) 3.375 8,000 2,000

RSRVE09700000 RVD(E) 3.375 4,640 4,000

RSRVE10700000 RWD(E)S 4.115 5,000 2,000

RSRVE11700000 RV(E) 5.88 3.265 6,000 1,149

RSRVE12700000 RV(E) 5.937 3.265 5,000 600

RSRVE13700000 RV(E)

5.95

3.265 6,000 1,000

RSRVE14700000 RVH(E) 3.265 10,000 1,230

RSRVE15700000 RVD(E) 3.375 6,000 2,400

RSRVE16700000 RWD(E)S 4.115 5,000 2,000

RSRVE17700000 RWD(E)S 4.115 7,500 1,200

RSRVE18700000 RV(E) 5.963 3.265 6,000 1,200


3.265 6,000 1,050

RSRVE20700000 RV(E)

6.00

3.265 6,000 1,000

RSRVE21700000 RWD(E) 3.375 6,000 2,400

RSRVE22700000 RWD(E)S 4.115 5,000 1,960

RSRVE23700000 RWD(E)S 6.25 4.115 5,000 1,000

RSRVE01963000 9- 5/8 RWS 8.405 5.86 5,000 1,200 300

-11-

RWBP WIRELINE SET BRIDGE PLUG

RWBP Wireline Set Bridge Plugs are compact, small OD and designed for easy drill out.

These bridge plugs will set securely in all but the very highest tensile casing. A ratchet lock

ring stores the setting force in the plug. The one piece packing element and metal back up

rings combine for a superior seal. The case hardened, one piece slips virtually eliminate

premature setting, yet can be easily drilled out. They are available for 2 3/8” through 20”

casing.

Features:

Can be set directly with Baker wireline setting tools

Easy for mill out

Ratchet lock rings secure dynamic setting force

One piece packing element and rocker action metal back up rings combine for a superior

seal

Shear studs are Baker style and connect directly to the Baker Adjuster Sub

These bridge plugs can be run directly on Baker Setting Sleeves and Adjuster Subs

Crossovers are not required

-12-

SPECIFICATIONS

Part Number

Casing

OD

Casing

Wt Setting Range

Setting

Tool

Setting kits

Tool

OD

Release

Force

(in) (lbs/ft) Min (in)

Max (in)

Type (in) (lbs)

RHWBP01237000 2 3/8 4.0-5.8 1.78 2.074

# 5

RHWBA01237000 1.75

9,000 RHWBP01287000 2 7/8 6.4-6.5 2.34 2.525 RHWBA01287000 2.22

RHWBP01350000 3 1/2 5.7-10.3 2.867 3.258 RHWBA01350000 2.75

RHWBP02350000 3 1/2 12.8-15.8 2.548 2.764 RHWBA02350000 2.43 13,000

RHWBP01400000 4 5.6-14 3.34 3.732 # 10

RHWBA01400000 3.14 20,000

RHWBP01450000 4 1/2 9.5-16.6 3.826 4.09 RHWBA01450000 3.59

33,000

RHWBP01500000 5 11.5-20.8 4.154 4.56

# 20

RHWBA01500000 3.93

RHWBP01550000 5 1/2 13-23 4.58 5.044 RHWBA01550000 4.31

RHWBP01575000 5 3/4 14-25.2 4.89 5.29 RHWBA01575000 4.7

RHWBP01662000 6 5/8 17-32 5.595 6.135 RHWBA01662000 5.37

50,000

RHWBP01700000 7 23-35 5.938 6.336 RHWBA01700000 5.68

RHWBP02700000 7 17-23 6.336 6.538 RHWBA02700000 6.00

RHWBP01762000 7 5/8 20-39 6.625 7.125 RHWBA01762000 6.31

RHWBP01862000 8 5/8 24-49 7.31 8.097 RHWBA01862000 7.12

RHWBP01962000 9 5/8 29.3-58.5 8.435 9.063

# 20

RHWBA01962000 8.12

50,000

RHWBP01108000 10 3/4 32.7-60.7 9.66 10.192 RHWBA01108000 9.43

RHWBP01118000 11 3/4 38-60 10.772 11.15 RHWBA01118000 10.43

RHWBP02118000 11 3/4 60-83 10.192 10.772 RHWBA02118000 9.94

RHWBP01134000 13 3/8 48-84.5 12.175 12.715 RHWBA01134000 11.88

RHWBP01160000 16 65-118 14.576 15.25 RHWBA01160000 14.12

RHWBP01200000 20 94-133 18.73 19.124 RHWBA01200000 18.37

-13-

RCBP COMPOSITE BRIDGE PLUG

RCBP Composite Bridge Plugs are used for temporary or permanent isolation of oil, gas

and water, such as zone isolation, formation fracturing, acidizing. These easy drillable

bridge plug can be use for multizone fracturing especially, so it will be a good choice

for shale gas exploration.

RCP-P Solid body

RCP-F No-solid body

RCP-D No-solid body, cage type

Features:

Can be set directly with RWSG/RWST wireline or RHSG/RHST hydraulic setting

tool

Easy for mill out

Slope bottom can stop the rotation of the bridge plug

The working temperature is below 150°C(300°F)

SPECIFICATIONS

Part number

Model

Casing

Casing

Dimension Setting range

Release

force

Pres-

sure

Temp

OD

ID

Length

Min

Max

(in)

(lbs/ft)

(in) (in) (in) (in) (in) (lbs) (psi) °F

RHSCP01500000 RCP-P

(Solid

body)

5 11.5~21 3.92 - 24.98 4.120 4.560 36,000 10k 300

RHSCP01550000 5 1/2” 15.5~23 4.36 - 32.38 4.670 4.950 33,000 10k 300

RHSCP01700000 7 23~35 5.63 - 35 5.938 6.366 55,000 10k 300

RHNCP01400000

RCP-F

(No-solid

body, ball

type)

4 5.6~14 3.19 0.75 26.33 3.320 3.548 26,000 10k 300

RHNCP01450000 4 1/2” 9.5~15.1 3.61 0.75 22.68 3.826 4.090 26,000 10k 300

RHNCP01500000 5 11.5~21 3.92 0.75 24.98 4.120 4.560 26,000 10k 300

RHNCP01550000 5 1/2” 15.5~23 4.36 1 30.23 4.670 4.950 33,000 10k 300

RHNCP01700000 7 23~38 5.63 1.5 38.53 5.920 6.366 55,000 10k 300

RHCCP01500000 RCP-D

(cage

type)

5 11.5~21 3.92 0.75 26.76 4.120 4.560 35,000 10k 300

RHCCP01550000 5 1/2” 15.5~23 4.36 1 30.23 4.670 4.950 33,000 10k 300

-14-

RMBP MECHANICAL BRIDGE PLUG

RMBP Mechanical Bridge Plugs are used to isolate zones for temporary or permanent

abandonment. These drillable bridge plugs set securely in any hardness casing. A ratchet lock

ring stores the setting force in the bridge plug. The one piece packing element and metal back up

rings combine for a superior seal. The case hardened, one piece slips virtually eliminate

premature setting, yet can be easily drilled out. They are available for 4 1/2" through 16"casing.

Features:

Sets securely in most casing, including many premium grades



seal

Compact, easy running

Pressure balanced sleeve valve is opened and closed by tubing manipulation from the

surface for better control

Set with Model RMSB Mechanical Setting Tool

These bridge plugs can be set on any standard baker style mechanical setting tool

SPECIFICATIONS

Part Number

Casing

OD Casing Wt Setting Range

Tool

OD

Release

Force

Setting Tool

(in) (lbs/ft) Min (in) Max (in) (in) (lbs)

RHMBP01450000 4 1/2 9.5-16.6 3.826 4.09 3.59

33,000

RHMSB01450000

RHMBP01500000 5 11.5-20.8 4.156 4.56 3.93

RHMBP01550000 5 1/2 13-23 4.58 5.044 4.31 RHMSB01550000

RHMBP01575000 5 3/4 14-26 4.89 5.29 4.7 RHMSB01575000

RHMBP01662000 6 5/8 17-32 5.595 6.135 5.37

50,000

RHMSB01662000

RHMBP01700000 7 17-35 6.004 6.538 5.68 RHMSB01700000

RHMBP01762000 7 5/8 20-39 6.625 7.125 6.31 RHMSB01762000

RHMBP01862000 8 5/8 24-49 7.511 8.097 7.12 RHMSB01862000

RHMBP01962000 9 5/8 29.3-58.4 8.435 9.063 8.12 RHMSB01962000

RHMBP01108000 10 3/4 32.75-60.7 9.66 10.192 9.43 RHMSB01108000

RHMBP01118000 11 3/4 38-60 10.772 11.15 10.43 RHMSB01118000

RHMBP02118000 11 3/4 60-83 10.192 10.772 9.94 RHMSB02118000

RHMBP01134000 13 3/8 48-80.7 12.175 12.715 11.88 RHMSB01134000

RHMBP01160000 16 65-118 14.576 15.25 14.12 RHMSB01160000

-15-

RWRP WIDE RANGE BRIDGE PLUG

Wide Range Wireline Set Bridge Plugs are specially designed to run through tubing or restricted pipe

and set securely in larger tubing or casing below. These bridge plugs will set securely in any hardness

casing. A ratchet lock ring stores the setting force in the plug. The three piece packing element and

metal back up rings combine for a superior seal. The case hardened, one piece slips virtually eliminate

premature setting, yet can be easily drilled out. They are available for 1.610” through 5.044” setting

range.

Features:

Sets securely in any hardness casing, including premium grades


Three piece packing element and rocker action metal back up rings combine for a superior seal


Can be set either with GO, Baker or Gearhart wireline setting tools

SPECIFICATIONS

Part Number

Setting Range Tool OD Release Force

Min (in) Max (in) (in) (lbs)

RHWBP01237000 1.610” 1.995” 1.468” 8,000

RHWBP02237000 1.905” 2.441” 1.750”

12,000

RHWBP03237000 2.156” 2.765” 1.906”

RHWBP01350000 2.375” 3.000” 2.187”

RHWBP02350000 2.441” 3.343” 2.281”

RHWBP01400000 2.875” 3.500” 2.500” 25,000

RHWBP02400000 3.187” 3.920” 2.750”

RHWBP01450000 3.920” 4.276” 3.250”

30,000 RHWBP01500000 3.696” 4.276” 3.500”

RHWBP01550000 4.154” 5.044” 4.062”

-16-

RHMBP HYDRO- MECH SET BRIDGE PLUGS

RHMBP Hydro-Mech Set Bridge Plugs are used for temporary or permanent isolation of oil, gas

and water, such as zone isolation, formation fracturing, acidizing. These bridge plug can be set by

drop a ball and up lift, do not need any setting tools. They are available for 4 1/4” through 20”

setting range.

Features:


Can be released by right hand rotation in an emergency

One piece packing element and rocker action metal back up rings combine for a superior seal

SPECIFICATIONS

Part number

Casing

OD Casing Wt Setting range

Tool

OD Pressure

Release

force

Connection

thread (in) (lbs/ft) Max(in) Min(in) (in) (PSI) (lbs)

RHHMB01450000 4 1/2 9.5-16.6 3.826 3.59 3.59

10,000

33,000

2 3/8”EUE

BOX

RHHMB01500000 5 11.5-20.8 4.154 3.93 3.93

RHHMB01550000 5 1/2 13-23 4.58 4.31 4.31

RHHMB01575000 5 3/4 14-25.2 4.89 4.7 4.7

RHHMB01662000 6 5/8 17-32 5.595 5.37 5.37

50,000

2 7/8”EUE

BOX

RHHMB01700000 7 23-35 5.938 5.68 5.68

RHHMB02700000 7 17-23 6.336 6.00 6.00

RHHMB01762000 7 5/8 20-39 6.625 6.31 6.31

RHHMB01862000 8 5/8 24-49 7.31 7.12 7.12

RHHMB01962000 9 5/8 29.3-58.5 8.435 8.12 8.12 8,000

3 1/2”IF BOX RHHMB01108000 10 3/4 32.7-60.7 9.66 9.43 9.43 5,000

RHHMB01118000 11 3/4 38-60 10.772 10.43 10.43 4,000

RHHMB01134000 13 3/8 48-84.5 12.175 11.88 11.88 3,000

4 1/2”IF BOX RHHMB01160000 16 65-118 14.576 14.12 14.12

1,500

RHHMB01200000 20 94-133 18.73 18.37 18.37

-17-

RWRB WIRELINE SET BRIDGE PLUGS ( RETRIEVABLE)

“RWRB” wireline set retrievable bridge plug is a medium performance retrievable bridge plug that is

run and set by a wireline pressure setting tool and retrieved by either tubing or sandline. The plug is

used for zone isolation, formation fracturing, acidizing, and wellhead repair and can be lubricated in

and out of the well under pressure, thereby eliminating snubbing tubing or killing the well. The plug

features a balanced equalizing value located immediately above the packing element system. Caged,

bi-directional, one piece slips are located below the packing and firmly anchor the plug against

pressure differentials from above or below. The plug is retrieved by ratcheting onto the retrieving neck,

picking up four inches to equalize, setting down to uplock, then picking up to remove from well. No

rotation is required to retrieve.

Features:

Compact, fast running, electric wireline set.

Tubing or sandline retrieved

No rotation required

Balanced equalizing valve opens upwardly which reduces possibility of accidental opening.

Equalizes close to top of packing elements tubing manipulation from the surface for better control

SPECIFICATIONS

Part Number

Casing OD Casing Wt Setting Range Tool OD Setting Force

(in) (lbs/ft) Min(in) Max(in) (in) (lbs)

RHWRB01450000 4-1/2” 9.5-13.5 3.92 4.09 3.771

33,000

RHWRB01500000 5 15-18 4.276 4.408 4.125

RHWRB01550000

5-1/2”

20-23 4.67 4.778 4.5

RHWRB02550000 15.5-20 4.778 4.95 4.641

RHWRB03550000 13-15.5 4.95 5.044 4.781

RHWRB01662000 6-5/8” 24-32 5.675 5.921 5.5

55,000

RHWRB01700000

7”

32-35 6.004 6.094 5.812

RHWRB02700000 26-29 6.184 6.276 5.968

RHWRB03700000 23-26 6.276 6.366 6.078

RHWRB04700000 17-20 6.456 6.538 6.266

RHWRB01762000 7-5/8”

33.7-39 6.625 6.765 6.453

RHWRB02762000 24-29.7 6.875 7.025 6.672

RHWRB01862000 8-5/8” 32-40 7.725 7.921 7.531

RHWRB01962000 9-5/8”

40-47 8.681 8.835 8.437

RHWRB02962000 47-53.5 8.535 8.681 8.218

-18-

RWCR WIRELINE SET CEMENT RETAINER

RWCR Wireline Set Sleeve Valve Cement Retainers are used for secondary cementing

operations. These drillable retainers set securely in any hardness casing. A ratchet lock ring

stores the setting force in the retainer. The one piece packing element and metal back up rings

combine for a superior seal. The case hardened, one piece slips virtually eliminate premature

setting, yet can be easily drilled out. They are available for 4 1/2” through 20” casing.

Features:




seal


Can be set directly with Baker wireline setting tools

Shear studs are Baker style and connect directly to the Baker Adjuster Sub

These retainers can be run directly on Baker Setting Sleeves and Adjuster Subs Crossovers are not required

SPECIFICATIONS

Part Number

Casing OD Casing Wt Setting Range Tool OD Release Force Setting tool


RHWCR01450000 4 1/2 9.5-16.6 3.826 4.09 3.59

33,000

RHWST01010000

RHWCR01500000 5 11.5-20.8 4.156 4.56 3.93

RHWST01020000

RHWCR01550000 5 1/2 13-23 4.58 5.044 4.31

RHWCR01575000 5 3/4 14-26 4.89 5.29 4.7

RHWCR01662000 6 5/8 17-32 5.595 6.135 5.37

50,000

RHWCR01700000 7 17-35 6.004 6.538 5.68

RHWCR01762000 7 5/8 20-39 6.625 7.125 6.31

RHWCR01862000 8 5/8 24-49 7.511 8.097 7.12

RHWCR01962000 9 5/8 29.3-58.4 8.435 9.063 8.12

RHWCR01108000 10 3/4 32.75-60.7 9.66 10.192 9.43

RHWCR02118000 11 3/4 38-60 10.772 11.15 10.43

RHWCR01118000 11 3/4 60-83 10.192 10.772 9.94

RHWCR01134000 13 3/8 48-80.7 12.175 12.715 11.88

RHWCR01160000 16 65-118 14.576 15.25 14.12

RHWCR01200000 20 94-133 18.73 19.124 18.37

-19-

RMCR MECHANICAL CEMENT RETAINER

RMCR Tubing Set Sleeve Valve Cement Retainers are used for secondary cementing operations.

These drillable retainers set securely in any hardness casing. A ratchet lock ring stores the setting

force in the retainer. The one piece packing element and metal back up rings combine for a

superior seal. The case hardened, one piece slips virtually eliminate premature setting, yet can be

easily drilled out. They are available for 4 1/2” through 16” casing.

Features:




seal


Pressure balanced sleeve valve is opened and closed by tubing manipulation from the

surface for better control

Set with Model RMSR Mechanical Setting Tool

SPECIFICATIONS

Part Number

Casing OD Casing Wt Setting Range Tool OD Release Force Setting Tool


RHMCR01450000 4 1/2 9.5-16.6 3.826 4.09 3.59

33,000

RHMSR01450000

RHMCR01500000 5 11.5-20.8 4.156 4.56 3.93

RHMCR01550000 5 1/2 13-23 4.58 5.044 4.31 RHMSR01550000

RHMCR01575000 5 3/4 14-26 4.89 5.29 4.7 RHMSR01575000

RHMCR01662000 6 5/8 17-32 5.595 6.135 5.37

50,000

RHMSR01662000

RHMCR01700000 7 17-35 6.004 6.538 5.68 RHMSR01700000

RHMCR01762000 7 5/8 20-39 6.625 7.125 6.31 RHMSR01762000

RHMCR01862000 8 5/8 24-49 7.511 8.097 7.12 RHMSR01862000

RHMCR01962000 9 5/8 29.3-58.4 8.435 9.063 8.12 RHMSR01962000

RHMCR01108000 10 3/4 32.75-60.7 9.66 10.192 9.43 RHMSR01108000

RHMCR01118000 11 3/4 38-60 10.772 11.15 10.43 RHMSR01118000

RHMCR01118000 11 3/4 60-83 10.192 10.772 9.94 RHMSR02118000

RHMCR01134000 13 3/8 48-80.7 12.175 12.715 11.88 RHMSR01134000

RHMCR01160000 16 65-118 14.576 15.25 14.12 RHMSR01160000

-20-

RSS STINGER SEAL ASSEMBLY

RHSS Stinger Seal Assembly is a tubing conveyed latching seal assembly that is used to operate the

sleeve-valve in an RWR Cement retainer previously set on wireline line. The RTSS should always

be run with a RTTC Tubing Centralizer to provide for easier entry into the Cement retainer.

Features:

Provide positive control when the work string is picked up to close the sleeve-valve. Re-

engages each time the work string is lowered to open sleeve-valve

Helps prevent seal from pumping out during pumping operations or tubing testing

One size operates several sizes of retainers

Rotate or Snap-out release

Can Run with Baker Cement Retainers

SPECIFICATIONS

part number

D-2 part number

Casing OD Casing Wt Retainer OD Connection thread

(in) (lbs/ft) (in)

RHSSA01575000

RHSSA02575000

4 1/2 9.5-16.6 3.59

2 3/8"-8RD EU

5 11.5-20.8 3.93

5 1/2 13-23 4.31

5 3/4 14-26 4.7

RHSSA01200000

RHSSA02200000

6 5/8 17-32 5.37

2 7/8"-8RD EU

7 17-35 5.68

7 5/8 20-39 6.31

8 5/8 24-49 7.12

9 5/8 29.3-58.4 8.12

10 3/4 32.75-60.7 9.43

11 3/4 38-60 10.43

11 3/4 60-83 9.94

13 3/8 48-80.7 11.88

16 65-118 14.12

20 94-133 18.37

-21-

RWST WIRELINE SETTING TOOLS

Wireline pressure setting tools come in single and multi-stage. Single stage tools provide dynamic

force, which is used to set bridge plugs, production packers or cement retainers.

Multi-stage setting tools feature increased stoke length, to enable the setting of casing patches, long

travel bridge plugs or any requiring more than the normal stroke and tension of conventional pressure

setting tools. The force is created by the gradual burning of a high temperature power charge, which

produces high pressure gas that is contained by an O-ring sealed top piston. The piston applies the

necessary stroke and tension to set and release from the equipment.

SPECIFICATIONS

Part number

Model

Type Tool OD

Working temperature /

pressure

Setting force

MAX

fluid Column

pressure Top thread

(in) (°F/PSI) (lbs) PSI

RHWST01005000 RWST baker#5 1.72 400/ 10,000 10,000 27,000 1”AMMT

RHWST01010000 RWST baker#10 2.75 400/ 20,000 33,000 15,000 2 3/8”-8RD EU

RHWST01020000 RWST baker#20 3.81 400 / 20,000 55,000 15,000 2 7/8”-8RD EU

-22-

RHST/RHSG HYDRAULIC SETTING TOOLS

The hydraulic setting tools are used to run and set packers, bridge plugs and cement retainers on a

work string, production tubing or coiled tubing. The setting tool translate hydraulic pressure applied

to the tubing to a force transmitted through the adapter kit to the slips and pack off the sealing

element of these tools. It allows setting in high-angle or deviated wells where it is often difficult to

use wireline equipment.

SPECIFICATIONS

Part number

Model

Type

Tool OD

Piston area Setting

force MAX

Tension

MAX

Length

Top thread

(in) (in^2) (lbs) (lbs)

RHHST01050000 RHST Baker#5 1.72 2.238 15,000 25,000 66.88 1”AMMT

RHHST01010000 RHST Baker#10 3.125 6.68 50,000 60,000 58.47 2 3/8”-8RD EU

RHHST01020000 RHST Baker#20 3 7/8 11.85 60,000 78,000 59.50 2 7/8”-8RD EU

RHHSG01020000 RHSG GO 3 7/8 11.85 60,000 78,000 73.30 2 7/8”-8RD EU

RHHST02020000 RHST #20/GO 3 7/8 15 60,000 70,000 49.07 2 7/8”-8RD EU

-23-

RMSB MECHANICAL SETTING TOOL

RMSB Mechanical Setting Tools are used to mechanically set RMBP Bridge Plugs. It is designed to

contain the upper slips of Bridge Plug in a safe retracted position while running to setting depth. The

upper slips are released by right hand rotation and slacking off on the work string.

Features:

Special designed Bow Spring provide positive control and allows one size Mechanical Setting

Tools to cover a large range of casing weight

Locked with Bridge Plug

The Upper slips are held in a safe retracted position while running

Can quickly be configured to set RMCR Cement Retainers

SPECIFICATIONS

Part number

Casing OD Casing Wt Top thread

(in) (lbs/ft)

RHMSB01450000

4 1/2 9.5-16.6

2 3/8”-8RD EU

5 11.5-20.8

RHMSB01550000 5 1/2 13-23

RHMSB01575000 5 3/4 14-26

RHMSB01662000 6 5/8 17-32

2 7/8”-8RD EU

RHMSB01700000 7 17-35

RHMSB01762000 7 5/8 20-39

RHMSB01862000 8 5/8 24-49

RHMSB09862000 9 5/8 29.3-58.4

RHMSB01108000 10 3/4 32.75-60.7

RHMSB01118000 11 3/4 38-60

RHMSB02118000 11 3/4 60-83

RHMSB01134000 13 3/8 48-80.7

RHMSB01160000 16 65-118

-24-

RMSR MECHANICAL SETTING TOOL

RMSR Mechanical Setting Tools are used to mechanically set RMCR Sleeve-Valve Cement Retainers.

This tool incorporates both a stinger seal and mechanical setting function. In addition, it has a built-in

snap-latch, allowing the tool to be latched into the cement retainer with set-down weight and released

with either up strain or right-hand rotation. The sleeve-valve on the cement retainer is in the open

position while being run in the well. When the setting procedure is completed, the sleeve-valve may

be closed by picking up two inches at the tools or opened by slacking off two inches. The snap-latch

feature allows the sleeve-valve to be shifted open or closed while the tubing is still anchored to the

retainer. Normally the valve is run open so the tubing may fill. However, for pressure testing the

tubing, while running, the valve can be run closed. Cement Retainers can be set and pressure tested in

a single trip.

Features:

Special designed Bow Spring provide positive control and allows one size Mechanical Setting

Tools to cover a large range of casing weight

The Upper slips are held in a safe retracted position while running

Allows users to set, pressure test tubing, and squeeze in a single trip

Can quickly be configured to set RMCR Cement Retainers or RMBP Bridge Plugs

SPECIFICATIONS

Part number

Casing OD Casing Wt Top thread

(in) (lbs/ft)

RHMSR01450000

4 1/2 9.5-16.6

2 3/8”-8RD EU

5 11.5-20.8

RHMSR01550000 5 1/2 13-23

RHMSR01575000 5 3/4 14-26

RHMSR01662000 6 5/8 17-32

2 7/8”-8RD EU

RHMSR01700000 7 17-35

RHMSR01762000 7 5/8 20-39

RHMSR01862000 8 5/8 24-49

RHMSR01962000 9 5/8 29.3-58.4

RHMSR01108000 10 3/4 32.75-60.7

RHMSR01118000 11 3/4 38-60

RHMSR02118000 11 3/4 60-83

RHMSR01134000 13 3/8 48-80.7

RHMSR01160000 16 65-118

-25-

RPSJ SAFETY JOINT & PUMP OUT PLUG

RPSJ SAFETY JOINT

SPECIFICATIONS (SHEAR RELEASE)

Part number

Tool OD Tool ID Release force Connection thread

(in) (in) (lbs)

RPSSJ01238000 3.063 2 44,000-62,000 2 3/8”-8RD EU

RPSSJ01288000 3.69 2.5 44,000-62,000 2 7/8”-8RD EU

RPSSJ01350000 4.5 3 44,000-62,000 3 1/2”-8RD EU

SPECIFICATIONS (LEFT OR RIGHT HAND RELEASE)

Part number

Tool OD Tool ID Connection

thread

Release

(in) (in)

RPSJL01238000 3.063 1.995 2 3/8”-8RD EU

Left hand RPSJL01288000 3.688 2.441 2 7/8”-8RD EU

RPSJL01350000 4.5 3 3 1/2”-8RD EU

RPSJR01288000 3.688 2.441 2 7/8”-8RD EU Right hand

RPSJR01350000 4.5 3 3 1/2”-8RD EU

SPECIFICATIONS (LATCH ANCHOR TYPE)

Part number

Tool OD Tool ID Connection

thread

Release

(in) (in)

RPLSJ01288000 4.625

2.375

2 7/8”-8RD EU

Right hand RPLSJ02350000 3 1/2” IF

RPLSJ01288000 5 3 3 1/2”-8RD EU

PUMP OUT PLUG

SPECIFICATIONS

Part number

Tool OD ID before/after Ball OD

Top thread

Bottom

Shear force

(in) (in) PSI

RMPOP01288000

3.75

1.25/2.25

1.5in

2 7/8" EUE

Half-mule shoe

(780-830)*6 RMPOP02288000 2 7/8" EUE

RMPOP03288000 Basket end

RMPOP01350000

4.5

1.75/2.87

2

3 1/2" EUE

Half-mule shoe

(900-950)*6 RMPOP02350000 3 1/2" EUE

RMPOP03350000 Basket end

-26-

RTAC TUBING ANCHOR

RTAC Tubing Anchor/Catchers are used to allow placement of tubing in tension. Vertical tubing

movement is prevented, which in turn lessens sucker rod tubing wear. Their small O.D. and large I.D.

permits larger volume production capacities. These fully retrievable tools can be easily adjusted for

emergency release by adding or removing shear pins. They are available for 4 1/2” through 7 5/8”

casings.

Features:


Large bore

Small OD

Model “R” right hand release or emergency shear release, Model “L” left hand release or

emergency shear release

Easy adjusted release from 5,000 lbs to 60,000 lbs

Drag blocks rather than drag springs

SPECIFICATIONS

Part number

Casing OD Casing Wt Setting range Tool OD Tool ID Connection thread

(in) (lbs/ft) Min(in) Max(in) ( in ) ( in )

RMTAC01450000(R) 4 1/2

9.5-13.5

3.920

4.090

3.75

1.93

2 3/8"-8RD EU

RMTAC02450000(L)

RMTAC01500000(L) 5

13.0-18.0

4.276

4.491

4.00

RMTAC02500000(R)

RMTAC01550000(L)

5 1/2

13.0-23.0

4.670

5.044

4.50

2.00

RMTAC02550000(R)

RMTAC03550000(L)

2 7/8"-10RD NU

RMTAC04550000(R)

RMTAC01700000(L) 7

23.0-40.0

5.920

6.580

5.50

RMTAC02700000(R)

RMTAC03700000(L)

7

17.0-38.0

5.920

6.580

5.76

3.00

3 1/2"-8RD EU

RMTAC04700000(R)

RMTAC05700000(L) 2.37

2 7/8"-8RD EU

RMTAC06700000(R)

R——right hand setting L——left hand setting

-27-

RHF RETRIEVABLE DOUBLE-GRIP HYDROSTATIC PACKER

RHF Retrievable Hydrostatic Packer is used in production, injection and zonal isolation. It can be run in

single or multiple zone installations. It is recommended for deviated wells where conditions are not

suitable for mechanical or wireline set packers. No tubing movement is required or generated to set the

packer. Once set, the packer is locked in place by one-piece no-directional slips. The packer can be

released by straight pull .They are available in 4 1/2” through 9 5/8” casing.

Features:


Simple operation

Hydraulically activated, hydrostatic set

Built-in unloader and bypass

Pack off is mechanically locked and constantly reinforced by hydrostatic pressure

Triple seal multi-durometer elements

No Mandrel movement during setting allows stacked packer applications

Straight pull release

-28-

SPECIFICATIONS

Part number

Casing

OD

Casing

Wt Setting range

Tool

OD

Connection

thread

Pump-Out

plug (in) (lbs/ft) Min(in) Max(in) (in)

RPHFH01450000 4 1/2 9.5-13.5 3.91 4.09 3.77

2 3/8"-8RD

EU

RMPOP01238000

RPHFH01500000 5 15-18 4.25 4.408 4.13

RPHFH02500000

5 11.5-15 4.408

4.56

4.25

5 1/2 26

RPHFH01550000 5 1/2

20-23 4.625 4.778 4.5

RPHFH02550000 15.5-20 4.778 4.95 4.64

RPHFH03550000

5 1/2 13-15.5 4.95

5.19

4.78

6 26

RPHFH01600000 6

20-23 5.191 5.39 5.06

RPHFH02600000 15-18 5.391 5.56 5.16

RPHFH01662000 6 5/8

34 5.561 5.609 5.41

RPHFH02662000 28-32 5.61 5.791 5.48

RPHFH03662000

6 5/8 24-28 5.791

5.921

5.48

2 7/8"-8RD

EU

RMPOP01288000

7 38

RPHFH01700000

6 5/8 24 5.83

5.937

5.66

7 38

RPHFH02700000

6 5/8 17-20 5.938

6.135

5.81

7 32-35

RPHFH03700000

7

26-29 6.136 6.276 5.97

RPHFH04700000 20-26 6.276 6.456 6.078

RPHFH05700000 17-20 6.456 6.578 6.266

RPHFH01762000

7 5/8

33.7-39 6.579 6.797 6.45

RPHFH02762000 24-29.7 6.798 7.025 6.67

RPHFH03762000 20-24 7.025 7.125 6.81

RPHFH01862000

8 5/8

44-49 7.511 7.687 7.31

3 1/2"-8RD

EU

RMPOP01350000

RPHFH02862000 32-40 7.688 7.921 7.53

RPHFH03862000 20-28 7.922 8.191 7.78

RPHFH01962000

9 5/8

47-53 8.343 8.681 8.21

RPHFH02962000 40-47 8.681 8.835 8.437

RPHFH03962000 29.3-36 8.921 9.063 8.59

-29-

RHS-2 HYDRAULIC SETTING PACKERS

RHS-2 Retrievable Hydraulic Packers can be run in single or multiple zone installations. It is

recommended for deviated wells where conditions are not suitable for mechanical or wireline set packers.

No tubing movement is required or generated to set

the packer. Once set, the packer is locked in place by one-piece bi-directional slips and will hold high

differential pressures. The packer can be released by either straight pull or right-hand tubing rotation. An

equalizing and by-pass feature is incorporated in the release mechanism. They are available for 5”

through 9 5/8” casing.

Features:


Recommended for deviated wells

Tubing pressure actuated

Three piece packing element system

Straight pull or rotational release

Bi-directional one-piece slips below the packer

-30-

SPECIFICATIONS

Part number

Casing

OD

Casing

Wt Setting range

Tool

OD

Tool

ID

Connection

thread

Pump-Out

plug (in) (lbs/ft) Min(in) Max(in) (in) (in)

RPHHS01500000 5 15-18 4.276 4.408 4.13 2

2 7/8"-8RD

EU

RMPOP01288000

RPHHS01550000 5 1/2

15.5-23 4.67 4.95 4.5 1.93

RPHHS02550000 9-13 5.044 5.192 4.81 1.93

RPHHS01700000

7

38 5.791 5.921 5.68

2.44

RPHHS02700000 29-35 5.92 6.184 5.812

RPHHS03700000 26-29 6.184 6.454 5.968

RPHHS04700000 20-26 6.276 6.184 6.078

RPHHS05700000 17-20 6.454 5.578 6.266

RPHHS06700000 38 5.791 5.921 5.68

3

3 1/2"-8RD

EU

RMPOP01350000

RPHHS07700000 29-35 5.92 6.184 5.812

RPHHS08700000 26-29 6.184 6.454 5.968

RPHHS09700000 20-26 6.276 6.184 6.078

RPHHS10700000 17-20 6.454 5.578 6.266

RPHFH01762000

7 5/8

33.7-39 6.579 6.797 6.39 2.44

2 7/8"-8RD

EU

RMPOP01288000

RPHFH02762000 20-24 7.025 7.125 6.73

RPHFH03762000 33.7-39 6.579 6.797 6.39

3

3 1/2"-8RD

EU

RPHFH04762000 20-24 7.025 7.125 6.73

RPHFH01962000

9 5/8

47-53 8.343 8.681 8.21

RPHFH02962000 40-47 8.681 8.835 8.437 RMPOP01350000

RPHFH03962000 29.3-36 8.921 9.063 8.59

-31-

RR-3D DOUBLE GRIP RETRIEVABLE PACKER

RR-3D Double Grip Retrievable Casing Packers are used in production, stimulation and testing

applications. Their hydraulic hold down is below the pressure equalization valve. They feature a proven

three element packing system and a balance sleeve device to assist in keeping the by-pass closed. They

are available for 4 1/2” through

9 5/8” casing.

Features:



Hydraulic hold down button unit with large internal flow path located below the bypass valve to

reduce element swabbing and button wicker dulling

Surface controlled combination bypass and equalizing valve

Tubing pressure actuated collet lock to eliminate excessive set down weight requirements

Rocker type Slips

Parts are interchangeable with other manufacturers

-32-

SPECIFICATIONS

Part number Casing OD Casing Wt Setting range Tool OD Tool ID Connection

thread (in) (lbs/ft) Min(in) Max(in) (in) ( in )

RPR3D01450000

4 1/2 11.6-13.5 3.91 4.00

3.77 1.94 2 3/8"-8RD EU

RPR3D02450000 9.5-10.5 3.91 4.09

1.9

2 7/8"-8RD EU

RPR3D01500000 5 15-18 4.25 4.408 4.13

RPR3D02500000 5 11.5-15

4.408 4.56 4.25 5 1/2 26

RPR3D01550000

5 1/2 20-23 4.625 4.778 4.5

2

RPR3D02550000 15.5-20 4.778 4.95 4.64

RPR3D01575000

5 1/2 13-15.5

4.95

5.19

4.78 5 3/4 22.5

6 26

RPR3D01600000

6 20-23 5.191 5.39 5.06

RPR3D02600000 15-18 5.391 5.56 5.16

RPR3D01662000

6 5/8

34 5.561 5.609 5.41

RPR3D02662000 28-32 5.61 5.791 5.48

RPR3D03662000 24-28 5.791 5.921 5.48

RPR3D04662000 28-32 5.6 5.791 5.48

2.42

2 7/8"-8RD EU

RPR3D05662000 6 5/8 24-28

5.791 5.921 5.59 7 38

RPR3D06662000 6 5/8 17-20

5.922

6.135

5.78 7 32-35

RPR3D07662000 6 5/8 24

5.83

5.937

5.66 7 38

RPR3D08662000 6 5/8 17-20

5.938 6.135 5.81 7 32-35

RPR3D01700000

7

26-29

6.136

6.276

5.97 RPR3D02700000 3 1/2"-8RD EU

RPR3D03700000 20-26 6.276 6.456 6.08

2 7/8"-8RD EU

RPR3D04700000 17-20 6.454 6.578 6.27

RPR3D01762000

7 5/8

33.7-39 6.579 6.797 6.45

RPR3D02762000 24-29.7 6.798 7.025 6.67

RPR3D03762000 20-24 7.025 7.125 6.81

RPR3D01862000

8 5/8

44-49 7.511 7.687 7.31

3.47

3 1/2"-8RD EU

RPR3D02862000 32-40 7.688 7.921 7.53

RPR3D03862000 20-28 7.922 8.191 7.78

RPR3D01962000

9 5/8

47-53.5 8.343 8.681 8.22

3.94

RPR3D02962000 40-47 8.681 8.835 8.44

RPR3D03962000 29.3-36 8.836 9.063 8.59

RPR3D04962000 40-47 8.681 8.835 8.44

2 7/8"-8RD EU RPR3D05962000 29.3-36 8.836 9.063 8.59

-33-

RR-3DL LARGE BORE DOUBLE GRIPRETRIEVABLE PACKER

Large Bore Model RR-3DL Double Grip Retrievable Casing Packers are used in production, stimulation

and testing operations where maximum I.D. is required

Their hydraulic hold down is below the pressure equalization valve. They feature a proven three element

packing system and a balance sleeve device to assist in keeping the by-pass closed. They are available for 5

1/2” through 7 5/8” casing.

Features:



Hydraulic hold down button unit with large internal flow path located below the bypass valve to reduce

element swabbing and button wicker dulling

Surface controlled combination bypass and equalizing valve

Tubing pressure actuated collet lock to eliminate excessive set down weight requirements

Rocker type Slips

Parts are interchangeable with other manufacturers

Large bore

SPECIFICATIONS

Part number

Casing OD Casing Wt Setting range Tool OD Tool ID

Connection


RP3DL01550000 5 1/2

20-23 4.625 4.778 4.5

2 3/8

2 7/8"-8RD EU

RP3DL02550000 15.5-20 4.778 4.95 4.64

RP3DL01600000

5 1/2 13-15.5

4.95

5.19

4.78 5 3/4 22.5

6 26

RP3DL01662000

6 5/8 17-20 5.938

6.135

5.81

3

3 1/2"-8RD EU

7 32-35

RP3DL01700000

7

26-29

6.136

6.276

5.97

RP3DL02700000

RP3DL03700000 20-26 6.276 6.456 6.08

RP3DL04700000 17-20 6.454 6.578 6.27

RP3DL01762000

7 5/8

33.7-39 6.579 6.797 6.45

RP3DL01762000 24-29.7 6.798 7.025 6.67

RP3DL01762000 20-24 7.025 7.125 6.81

-34-

RMLS MECHANICAL SET RETRIEVABLE PRODUCTION PACKER RMLS retrievable casing packer is a general purpose packer for production, injection, zone isolation, or

remedial operations. It is a full bore double-grip retrievable packer with an integral unloader. Opposed,

non-transferring dovetail slips prevent movement of the packer in either direction due to pressure

differentials, while allowing landing of the tubing in tension, compression, or neutral. The Lock

Segments serve as a releasable Lock Ring to maintain pack-off once the packer is set,and locks the

unloader in the closed position until the tool is released. The Split Lock and Control Segments allow the

tool to be both set and released with right-hand rotation.

Features:

Internal bypass reduces swabbing.

Holds pressure differentials from above or below.

Can be set using tension or compression.

Set and released with right-hand rotation.

Tubing string can be held in tension, compression or neutral set while the packer remains engaged.

Packing element options are available for hostile environments.

-35-

SPECIFICATIONS

Part number

Casing OD Casing Wt Setting range Tool OD Tool ID Connection


RPMLS01450000 4 1/2

11.6-13.5 3.91 4.00 3.77

1.97

2 3/8"-8RD

EU

RPMLS02450000 9.5-10.5 4.00 4.09

RPMLS01500000 5 15-18 4.25 4.408 4.13

RPMLS02500000

5 11.5-15 4.408

4.56

4.25

5 1/2 26

RPMLS01550000 5 1/2

20-23 4.625 4.778 4.5

2

RPMLS02550000 15.5-20 4.778 4.95 4.64

RPMLS01575000

5 1/2 13-15.5

4.95

5.19

4.78 5 3/4 22.5

6 26

RPMLS01600000 6

20-23 5.191 5.39 5.06

RPMLS02600000 15-18 5.391 5.56 5.16

RPMLS01662000

6 5/8

34 5.561 5.609 5.41

RPMLS02662000 24-32 5.561 5.921 5.48

RPMLS03662000 17-24 5.992 6.135 5.78

RPMLS01700000

6 5/8 24 5.83

5.937

5.656

2.438

2 7/8"-8RD

EU

7 38

RPMLS02700000

6 5/8 17-20 5.938

6.135

5.812

7

32-35

RPMLS03700000 26-29 6.136 6,276 5.968

RPMLS04700000 20-26 6.276 6.456 6.08

RPMLS05700000 17-20 6.456 6.578 6.266

RPMLS01762000

7 5/8

33.7-39 6.579 6.797 6.45

RPMLS02762000 24-29.7 6.798 7.025 6.67

RPMLS03762000 20-24 7.025 7.125 6.81

RPMLS01862000

8 5/8

44-49 7.511 7.687 7.31

3.481

4"-8RD EU

RPMLS02862000 32-40 7.688 7.921 7.53

RPMLS03862000 20-28 7.922 8.191 7.78

RPMLS01962000

9 5/8

47-53.5 8.343 8.681 8.22

3.92 RPMLS02962000 40-47 8.681 8.835 8.44

RPMLS03962000 29.3-36 8.836 9.063 8.59

-36-

RASX MECHANICAL SET RETRIEVABLE PRODUCTION PACKERS

The RASX single string Mechanical Production Packer is a retrievable, double-grip compression or

tension-set production packer that holds pressure from above or below. Once set the tubing string can be left

in tension, compression, or in a neutral position. A large internal bypass reduces the swabbing effect during

run-in and retrieval, and closes when the packer is set. When the packer is released, the bypass opens first,

allowing the pressure to equalize before the upper slips are pulled from the casing. The Model MAPSET-HP

also features an upper slip releasing system that reduces the force required to release the packer. A

non-directional slip is released first, making it easier to release the other slips. These flexible features allow

the MAPSET-HP to be run in a variety of applications ranging from Production Packer to Bridge Plug to

Service Packer.

Features:

Internal bypass reduces swabbing.

Tension or compression set

Holds high pressure differentials from above or below.

Can be set using tension or compression.

Only one-quarter right rotation is required to set and release.

Tubing string can be held in tension, compression or neutral set while the packer remains engaged.

Optional shear release features available upon request.

Packing element options are available for hostile environments.

Bypass valve is below upper slips so the debris is washed from slips when the valve is opened.

-37-

RAD-1 TENSION PACKERS

RAD-1 Tension Packer is a retrievable, tension set packer, designed to hold pressure from below. This

economical tension packer is for shallow wells where sufficient set down weight is not available to

utilize a set down packer. This packer can be used in water flood, oil production or treating

applications. They are available for 4” through 13 3/8” casing.

Features:


Compact, short, easy to transport and run

Bore is larger than tubing drift diameter

Easy to operate J-Slot control

Rocker type slips

One piece packing

Three release methods, Normal release, Shear release and safety joint to sub

arts are interchangeable with other manufacturers

-38-

SPECIFICATIONS

Part number

Casing OD Casing Wt Setting range Tool OD Tool ID Connection

thread (in) (lbs/ft) Min(in) Max(in) ( in ) (in)

RPAD101400000 4 9.5-11.6 3.428 3.548 3.188

1.937

2 3/8"-8RD

EU

RPAD101450000 4 1/2

12.6-15.1 3.754 3.826 3.609

RPAD102450000 9.5-13.5 3.91 4.09 3.771

RPAD101500000 5 15-18 4.25 4.408 4.125

RPAD102500000

5 11.5-15 4.408

4.56

4.25

5 1/2 26

RPAD101550000 5 1/2 20-23 4.625 4.778 4.5

1.978

RPAD102550000 5 1/2 15.5-20 4.778 4.95 4.641

RPAD101575000

5 1/2 13-15.5

4.95

5.19

4.781 5 3/4 22.5

6 26

RPAD101600000 6

20-23 5.191 5.39 5.062

RPAD102600000 15-18 5.391 5.56 5.156

RPAD101662000 6 5/8 28-32 5.61 5.791 5.484

RPAD102662000

6 5/8 24 5.83

5.937

5.656

2.416

2 7/8"-8RD

EU

7 38

RPAD102662000

6 5/8 17-20 5.938

6.135

5.812

7 32-35

RPAD101700000 7

26-29 6.136 6.276 5.968

RPAD102700000 20-26 6.276 6.456 6.078

RPAD103700000 17-20 6.456 6.578 6.266

RPAD101762000

7 5/8

33.7-39 6.579 6.797 6.453

RPAD102762000 24-29.7 6.798 7.025 6.672

RPAD103762000 20-24 7.025 7.125 6.812

RPAD101862000

8 5/8

40-49 7.511 7.725 7.312

3

3 1/2"-8RD

EU RPAD102862000 32-40 7.725 7.921 7.531

RPAD103862000 20-28 7.922 8.191 7.781

RPAD101962000

9 5/8

47-53.5 8.3 8.681 8.218

4

4 1/2"-8RD

EU

RPAD102962000 40-47 8.681 8.835 8.437

RPAD103962000 29.3-36 8.836 9.063 8.593

RPAD101108000 10 3/4 32.7-55.5 9.625 10.192 9.5

RPAD101118000 11 3/4 38-60 10.605 11.2 10.5

RPAD101128000 12 3/4 48-53 11.75 12.3 11.625

RPAD101134000 13 3/8 48-72 12.3 12.715 12

-39-

RTTS PACKERS

The RTTS packer is a full-opening, hook wall packer used for testing, treating, and squeeze cementing

operations. In most cases, the tool runs with a circulating valve assembly.

Features and Benefits

The full-opening design of the packer mandrel bore allows large volumes of fluid to pump through

the tool. Tubing-type guns and other wireline tools can be run through the packer.

The packer can be set and relocated as many times as necessary with simple tubing manipulation.

Tungsten carbide slips provide greater holding ability and improved wear resistance in high-strength

casing. Pressure through the tubing activates the slips in the hydraulic holddown mechanism.

An optional integral circulating valve locks into open or closed position during squeezing or treating

operations, and opens easily to allow circulation above the packer.

-40-

SPECIFICATIONS

Part number

Casing

OD Casing W.t

Tool

OD

Tool

ID

Top Thread Connection

Lower Thread Connection

in lb/ft in. in.

RPRTTS01700000

7

17-26

6.677

2.40 4 5/32-8UN 2 7/8EUE

RPRTTS02700000 23～29 2.40 3 7/8in CAS 2 7/8in 8RD EUE

RPRTTS03700000 32～38 2.00 3 1/2in 8 UNS 2 7/8in 8RD EUE

RPRTTS01762000

7 5/8

20～26.4

7.31

2.44 3 1/2 EUE 3 1/2 EUE

RPRTTS02762000 26.4～29.7 2.44 3 1/2 EUE 3 1/2 EUE

RPRTTS03762000 29.7～39 2.40 4 5/32in 8UNS 3 7/8 in CAS

RPRTTS01862000 8 5/8 24-49 8.5 3.00 4 1/2in API IF T.J. 4 1/2in API IF T.J.

RPRTTS01962000

9 5/8

29.3-53.5

9.53

3.976 4 1/2in API IF T.J. 4 1/2in API IF T.J.

RPRTTS02962000 47-53.5 3.976 4 1/2in API IF T.J. 4 1/2in API IF T.J.

RPRTTS03962000 40-71.8 3.976 4 1/2in API IF T.J. 4 1/2in API IF T.J.

RPRTTS01108000

10 3/4

32.75-55.5

10.39


RPRTTS02108000 60.7-65.7 3.75 4 1/2in API IF T.J. 4 1/2in API IF T.J.

RPRTTS03108000 71.1～81 3.75 4 1/2in API IF T.J. 4 1/2in API IF T.J.

RPRTTS01118000 11 3/4

38-54 11.28


RPRTTS01118000 60-71 3.75 4 1/2in API IF T.J. 4 1/2in API IF T.J.

RPRTTS01134000 13 3/8

48-72 12.93



RPRTTS01140000 14 48～72 13.04 3.75 4 1/2in API IF T.J. 4 1/2in API IF T.J.

RPRTTS01160000

16

55～65

15.4




RPRTTS01186000 18 5/8 78-118 17.99 3.75 4 1/2in API IF T.J. 4 1/2in API IF T.J.

RPRTTS01200000 20

94-133 19.33



-41-

SPP-XC PERMANENT PRODUCTION PACKERS

Model SPP-XC Permanent Production Seal Bore Packers have a larger ID through the

packer bore making them an excellent choice for parallel string installations and similar

applications. These wireline set millable packers are available for 4 1/2” through 9 5/8”

casing.

Features:



Three piece packing element and rocker action metal back up rings combine for a

superior seal

Threaded pin down connection for easy installation of accessories

Can be set with GO, Baker or Gearhart wireline Setting Tools

SPECIFICATIONS

Part number

CasingOD Casing Wt Setting range Tool OD Sealbore Release

force

Sealing tube (in) (lbs/ft)

Min (in)

Max (in)

(in) ( in ) (lbs)

RPPPX01450000 4 1/2 9.5-13.5 3.92 4.124 3.781

2.5

28000

RPSBX01500000

RPPPX01500000 5 15-21 4.125 4.436 3.968

RPPPX02500000

5 11.5-13 4.437

4.67

4.25

5 1/2 23-26

RPPPX01550000

5 1/2

20-23 4.625 4.811 4.437

3

38000

RPSBX01550000 RPPPX02550000 14-17 4.812 5.012 4.562

RPPPX03550000 13-14 4.976 5.124 4.75

RPPPX01700000

6 5/8 20-24 6.875

6.094

5.687

4

48000

RPSBX01700000

7 32-38

RPPPX02700000

6 5/8 17-20 6.095

6.276

5.875

7 26-29

RPPPX03700000 7 20-23 6.277 6.456 6

RPPPX04700000

7 17-20 6.456

6.765

6.25

7 5/8 33.7-39

RPPPX01762000 7 5/8 20-29 6.875 7.125 6.625

RPMLS03962000 9 5/8 29.3-53.5 8.535 9.063 8.125 4.75 55000 RPSBX01962000

-42-

RSSD NON-ELASTOMERIC SLIDING SLEEVES

The Models RSSD Non-Elastomeric Circulating Sliding Sleeve, is a high performance, equalizing sliding

sleeve, which allows communication between the tubing and annulus for circulation or selective-zone

production. The external circulating sliding sleeve allows hydraulic setting of packers and verifies the

seal integrity between the packer and the tubing

Features:

A specially designed diffuser ring made of high strength thermoplastic is critically spaced between

the flow ports and the upper packing unit. This prevents damage to the upper packing unit during

shifting by controlling the rush of fluid or gas, and lessens the likelihood of tool string damage by

providing for slow equalization of high differentials

Mill slots replace drill holes as flow ports on both the housing and the insert to allow more flow area,

reduce erosion and allow higher torque and tensile strength through the sleeve

Locating the threaded connection inside the primary seal stack eliminates the need for O-ring thread

seals and reduces the number of potential leak paths

A locking, angled torque shoulder replaces traditional square shoulder to allow higher torques and reduce

thread back off

Modular design permits conversion from a Model RSSD or vice versa by only changing the upper and lower

subs

Proprietary non-elastomeric and elastomeric compounds enhance a sealing system designed for diverse

environments

SPECIFICATIONS

Part Number

Size OD Seal Bore Pressure Thread

in. in. in. psi.

RNSSD01287000 2.875 3.30 2.313

7500

2 7/8” EUE

RNSSD01350000 3.500

4.00

2.750 3 1/2” EUE

RNSSD02350000 2.813

RNSSD01450000 4.500 5.9 3.813 4 1/2” EUE

-43-

RCV XO/XD CIRCULATING SLEEVE

The “XO/XD” Circulating Sleeve provides a convenient way to establish or shut off communication

between the tubing and the annulus. Any number of these sleeves may be run in a tubing string, and

any or all of them may be opened or closed in one run by standard wireline methods.

Features:

Features a nipple profile above and a packing bore above and below the communication ports.

Ports can be closed without leaving any obstructions in the tubing once the shifting operation is

completed.

The Model “RB” Shifting Tool is used to open (jarring down) or close (jarring up) the “XO/XD”

Circulating sleeve.

XO CIRCULATING SLEEVE SPECIFICATIONS

Part Number

Size OD Seal Bore Port Area Pressure Thread

in. in. in. in2 psi.

RNXOV01237000 2.375 3.063 1.875 1.84

7000

2 3/8” EUE

RNXOV01287000 2.875 3.30 2.313 2.405 2 7/8” EUE

RNXOV01350000 3.500

4.00

2.750 4.454 3 1/2” EUE

RNXOV02350000 2.813 4.454

XD CIRCULATING SLEEVE SPECIFICATIONS

Part Number



RNXDV01237000 2.375 3.063 1.875 1.84

7000

2 3/8” EUE

RNXDV01287000 2.875 3.30 2.313 2.405 2 7/8” EUE

RNXDV01350000 3.500

4.00

2.750 4.454 3 1/2” EUE

RNXDV02350000 2.813 4.454

-44-

RCV XA CIRCULATING SLEEVE

The “XA” Circulating Sleeve provides a convenient way to establish or shut off communication

between the tubing and the annulus. Any number of these sleeves may be run in a tubing string, and

any or all of them may be opened or closed in one run by standard wireline methods.

Design Features:

Features a nipple profile above and a packing bore above and below the communication ports.


completed.

The Model “RB” Shifting Tool is used to open (jarring up) or close (jarring down) the ‘ XA”

Circulating sleeve.

XA CIRCULATING SLEEVE SPECIFICATIONS

Part Number



RNXAV01237000 2.375 3.063 1.875 1.84

7000

2 3/8” EUE

RNXAV01287000 2.875 3.30 2.313 2.405 2 7/8” EUE

RNXAV01350000 3.500

4.00

2.750 4.454 3 1/2” EUE

RNXAV02350000 2.813 4.454

-45-

RCV XL CIRCULATING SLEEVE

The XL Circulating Sleeve provides a way to establish or shut off communication between the tubing

and the annulus. Any number of sleeves may be run in a tubing string and any or all of them may be

opened or closed with a Self Releasing RD-2 Shifting Tool.

Features

a nipple profile above and a packing bore above and below the communication ports.

Dependable, Simple, Quick


completed.

The Model “RD-2” Shifting Tool is used to open (jarring up) or close (jarring down) the “XL”

Circulating Sleeve.

All premium threads available.

Material: 4140 / Optional 13% Chrome

XL CIRCULATING SLEEVE SPECIFICATIONS

Part Number



RNXLV01237000 2.375 3.063 1.875 1.84

7500

2 3/8” EUE

RNXLV01287000 2.875 3.30 2.313 2.405 2 7/8” EUE

RNXLV01350000 3.500

4.00

2.750 4.454 3 1/2” EUE

RNXLV02350000 2.813 4.454

-46-

RX PROFILE NIPPLE

"RX" Profile Nipple offers an expanded versatility to downhole selection. Any desired number of

"RX" Nipples can be placed in the production string, thereby offering an unlimited number of

positions for setting and locking surface controls.

Applications:

Land blanking plugs to shut in well or to test the production tubing.

Land Velocity Type Safety Valves.

Land equalizing check valves.

Land circulating blanking plugs.

Land chokes to reduce surface flowing pressures.

Land instrument hangers with geophysical devices such as pressure and temperature recorders.

SPECIFICATIONS

Part Number


in. in. in. psi.

RNXNX010109001 1.900 2.20 1.500

10,000

1.90” EUE

RNXNX010237001 2.375 2.75 1.875 2 3/8” EUE

RNXNX010287001 2.875 3.30 2.313 2 7/8” EUE

RNXNX010350001 3.500

4.00

2.750 3 1/2” EUE

RNXNX020350001 2.813

RNXNX010450001 4.500 5.9 3.813 4 1/2” EUE

-47-

RXN PROFILE NIPPLE

"RXN" Profile Nipple is a BOTTOM No-Go Nipple that provides for the location of various

wireline flow control devices in the production string.

Applications:







Restricted I.D. catches tools dropped during wireline work.

SPECIFICATIONS

Part Number

Size OD Seal Bore No-Go ID Pressure Thread

in. in. in. in psi.

RNXNN010190001 1.900 2.20 1.500 1.448

10,000

1.90”EUE

RNXNN010237001 2.375 2.75 1.875 1.791 2 3/8” EUE

RNXNN010287001 2.875 3.30 2.313 2.205 2 7/8” EUE

RNXNN010350001 3.500

4.00

2.750 2.635 3 1/2” EUE

RNXNN020350001 2.813 2.666

RNXNN010450001 4.500 5.9 3.813 3.725 4 1/2” EUE

-48-

RF PROFILE NIPPLE

"RF" Profile Nipple is a TOP No-Go Nipple that provides for the location of various wireline flow

control devices in the production string.

Applications:







SPECIFICATIONS

Part Number


in. in. in. psi.

RNFNX010190001 1.900 2.500 1.500

10000

1.90” EUE

RNFNX010237001

2 .375

3.063

1.781

2 3/8” EUE RNFNX020237001 1.812

RNFNX030237001 1.875

RNFNX010287001 2 .875

3.668

2.250 2 7/8” EUE

RNFNX020287001 2.312

RNFNX010350001 3.500

4.500

2.750 3 1/2” EUE

RNFNX020350001 2.812

RNFNX010450001 4.500 5.9 3.75 4 1/2” EUE

RNFNX020450001 4.500 5.9 3.812

-49-

RR PROFILE NIPPLE

"RR" Profile Nipple is a BOTTOM No-Go Nipple that provides for the location of various wireline

flow control devices in the production string.

Applications:







Restricted I.D. catches tools dropped during wireline work.

SPECIFICATIONS

Part Number

Size OD Seal Bore No-Go ID Pressure Thread

in. in. in. in psi.

RNRNX010190001 1.900 2.500 1.500 1.447

10,000

1.90” EUE

RNRNX010237001

2 .375

3.063

1.781 1.728

2 3/8” EUE RNRNX020237001 1.812 1.760

RNRNX030237001 1.875 1.822

RNRNX010287001 2 .875

3.668

2.250 2.197 2 7/8” EUE

RNRNX020287001 2.312 2.259

RNRNX010350001 3.500

4.500

2.750 2.697 3 1/2” EUE

RNRNX020350001 2.812 2.759

RNRNX010450001 4.500 5.9 3.75 4.500 4 1/2” EUE

RNRNX020450001 4.500 5.9 3.812 4.500

-50-

ROCK GAS LIFT TOOL

Artificial Lift

Artificial lift is a means of overcoming bottomhole pressure so that a well can

produce at some desired rate, either by injecting gas into the producing fluid

column to reduce its hydrostatic pressure, or using a downhole pump to provide

additional lift pressure downhole .

ROCK can provide all kinds of mandrels 、gas lift valves and special

application valves from tubing retrievable or wireline retrievable versions.

These include IPO, PPO, dummy valves, chemical injection and water flood

valves. And they all are available in 1″or 1.5″OD.

-51-

CONVENTIONAL MANDREL

ROCK provides two kinds of Conventional Mandrels for customer. The Conventional Mandrels are

designed to accept the 1”or 1.5”tubing-retrievable gas lift valve and tubing flow check valve. The

Mandrels are manufactured with side guards to protect the valve when running or pulling the tubing

string. These mandrels are available in various tubing grades such as J-55,N-80, L-80, P-110 & other

grades of material as per customer requirement.

FEATURE

Simple Easy to use

Standard NPT thread to connection，excellent sealing property

With side guards to protect the valve

Conventional Mandrels for 1’’ Gas Lift Valve SPECIFICATIONS

Part number

Size Tool OD Tool ID length Pressure Thread

in in in ft psi.

RGCMX01238000 2-3/8 4.13 1.995 4

5000

2 3/8” EUE

RGCMX01288000 2-7/8 4.69 2.441 4 2 7/8” EUE

RGCMX01350000 3-1/2 5.32 2.992 4 2 7/8” EUE

RGCMX01450000 4-1/2 6.32 3.958 4 2 7/8” EUE

Conventional Mandrels for 1.5’’ Gas Lift Valve SPECIFICATIONS

Part number

Size Tool OD Tool ID length Pressure Thread

in in in ft psi.

RGCMX02238000 2-3/8 4.577 1.995 4

5000

2 3/8” EUE

RGCMX02288000 2-7/8 5.13 2.441 4 2 7/8” EUE

RGCMX02350000 3-1/2 5.859 2.992 4 2 7/8” EUE

-52-

RGCMX02450000 4-1/2 6.875 3.958 4

2 7/8” EUE

-53-

SIDE POCKET MANDREL

ROCK Side Pocket Mandrels are designed to accept the

1’’or 1-1/2”wireline-retrievable gas lift valve, it allows use of standard wire line tools for installation

and retrieval of different types of flow control devices.

FEATURE

with orienting sleeve

Suitable for standard Wire line tools for installation and retrieval of different types of flow

control devices.

Generally Low Alloy Steel AISI 4130 is used. For corrosive application , AISI 410 is used. Other materials

are used as per customer’s requirement.

OVAL

Side Pocket Mandrels for 1’’ Gas Lift Valve SPECIFICATIONS

Part number

Size

Tool

type

Tool

OD

Tool

ID

Drift

Dia

Sealing Bore length

Pressure

Thread

Upper Lower

in

in in in in in in psi.

RGSPM01238000 2-3/8

OVAL

4.33 1.995 1.89

1.027

1.027

85.5

5000

2 3/8” EUE

RGSPM01288000 2-7/8 4.75 2.441 2.347 85 2 7/8” EUE

RGSPM01350000 3-1/2 5.47 2.992 2.867 85 2 7/8” EUE

RGSPM01450000 4-1/2 6.35 3.958 3.833 86 2 7/8” EUE

Side Pocket Mandrels for 1.5’’ Gas Lift Valve SPECIFICATIONS

Part number

Size

Tool

type

Tool

OD

Tool

ID

Drift

Dia

Sealing Bore length

Pressure

Thread

Upper Lower

in

in in in in in in psi.

RGSPM02238000 2-3/8

OVAL

4.33 1.995 1.89

1.558

1.496

102

5000

2 3/8” EUE

RGSPM02288000 2-7/8 4.75 2.441 2.347 103 2 7/8” EUE

RGSPM02350000 3-1/2 5.47 2.992 2.867 111.5 2 7/8” EUE

RGSPM02450000 4-1/2 6.35 3.958 3.833 107 2 7/8” EUE

-54-

WIRELINE RETRIEVABLELATCHES

ROCK supplies a wide range of Wireline-retrievable latches to compliment its diverse selection of wireline valves.

These include: BEK-2, BK-2, REM, RK-2 and RRA latches,

The BEK and BK-2 latches are spring loaded with a ring style lock mechanism. Similar to the BEK/BK style

latches the RK versions are also fitted with spring loaded mechanisms. Latches are primarily available in 316

stainless steel but any material can be offered for more hard wearing environments. These lathes can be coated if

necessary to meet the most demanding applications.

BK-2 RK-2 BEK-2 REM RRA

SPECIFICATIONS

Valve Size

Latch model

Latch

mechanism

Ported

ID

Pulling Neck

OD

Running Neck

OD

Max Valve

OD

in

in in in in

1”

BK-2

Lock-ring

0.313

0.875

0.75

1.359

BEK-2

1.5”

RK 0.453

1.185

0.937

1.786

RKP

-55-

DUMMY VALVES

ROCK supplies three kind of Dummy Valves. These include:RCD-1、RCD-2 and RCDK.

1. Prevents communication between the casing and tubing by blocking of side pocket mandrel

2. Blanking the tubing till gas lift is really feasible

3. Pressurize the tubing

Features

Available in top latch and bottom latch configuration

Valves are available in any material, primarily Stainless steel and MONEL material

A wide range of packing materials are available for different environments

The valve is compatible with all standard top latches giving its application more versatility

Compatible with most mandrels

RCD-1 RCD-2 RCDK

-56-

TUBING-RETRIEVABLE CHEMICAL-INJECTION VALVES

This conventional Tubing retrievable vale is used to inject corrosion inhibiting chemicals (and other

chemicals) to ward off the risk of harmful corrosive activity in the tubing or down hole tools, useful in

annular or injection control line applications

Features

The valves come complete with the fundamental check valve which will avert reverse flow from

tubing to casing

Seat and ball can be replaced easily for servicing a

Setting tools allow for easy pressure adjustments

The valve is not adversely affected by temperature due to its spring loaded design

The INCONEL spring and check valve spring withstand the highest of temperatures and corrosive

environments

Valves are available in any material, primarily Nickel and Copper alloys

SPECIFICATIONS

Valve Model RCI-11 RCI-12

Valve OD 1in 1.19in

Port Size

1/8in 1/8in

3/16in 3/16in

1/4in 1/4in

-57-

WIRELINE-RETRIEVABLE CHEMICAL-INJECTION VALVES

These wireline retrievable valves are used to inject corrosion inhibiting chemicals (and

other chemicals) to ward off the risk of harmful corrosive activity in the tubing or downhole

tools，Useful in annular or injection control line applications

Features

The valves come complete INCONEL power springs that are suited to high temperatures

and corrosive agents within the well

The spring is available in any size depending on the pressure requirement

Tungsten Carbide seat and ball can be replaced easily for servicing and ensures the

highest resistance to abrasives, preserving the valves. life.

Setting tools allow for easy pressure adjustments

The valve is not adversely affected by temperature due to its spring loaded design

The valves come complete with the fundamental check valve which will avert reverse

flow from tubing to casing

RCH-R1 RCH-R2

SPECIFICATIONS

Valve Model RCH-R1 RCH-R2

Valve OD 1in 1.19in

Port Size

1/8in 1/8in

3/16in 3/16in

1/4in 1/4in

-58-

TUBING-RETRIEVABLE-RETRIEVABLE CHECK VALVES

Every gas lift valve is attached to a reverse flow check when being installed on the

mandrel. The purpose of this check is to prevent backflow from transferring from the

tubing into the casing while gas is being injected into the well. Check Valves and their

components are made with stainless steel, or premium material to prevent corrosion. The

check dart is pressed against the seal until a differential in pressure is felt above the dart,

preventing backflow into the casing.

Features

The seat design incorporated in these check valves eliminates the risk of backflow, protecting

the casing and cutting costs associated with maintenance

The NPD threading feature on the bottom of the check valve means it is easy to attach

2 or 3 valves for greater protection against leaks

The internal spring is INCONEL material. This withstands the harshest corrosives and

temperatures giving life and reliability to the valve

RCV-1 RCV-2

SPECIFICATIONS

Valve Model RCV-1 RCV-2

Valve OD 1in 1.5in

-59-

WATERFLOOD-INJECTION VALVES

Features

The wireline retrievable feature of these valves means the there is no need to pull the entire

tubing for maintenance or exchange

Internal or external check valves to prevent cross flow

Low operating pressures and consistent flow rates

Compatible with most latch designs

RCWF-1 RCWF-2

SPECIFICATIONS

Valve Model RCWF-1 RCWF-2

Valve OD 1 in 1.5in

Min Injection Rate (bwpd) 200 300

Max injection rate (bwpd) 900 2700

-60-

INJECTION PRESSURE-OPERATED WIRELINE-RETRIEVABLE

VALVES（IPO）

1. Continuous or intermittent operations

2. Kick off wells that contain heavy amounts of production fluid

3. Used in conjunction with water flood systems

4. Casing or tubing flow application depending on the side pocket porting configuration

Features

The wireline retrievable feature of these valves means the there is no need to pull the entire tubing for

maintenance or exchange

The maximum travel stop feature eliminates the risk of bellow stacking

ply MONEL bellows in all valves that require them for optimum performance and durability

These IPO valves include Nitrogen charged dome-and-bellow configurations

Filling the bellows with silicon fluid protects the bellows from hydrostatic forces (pressure) in the well by

forming a hydraulic barrier

This silicon fluid also minimizes the vibrations and chattering which prevents the seat from any damage

The bellows have an internal guidance system which prevents corkscrewing and increases the cycle life of the bellow

The reverse flow check valve helps to avoid costly work over procedures (elastomer primary seal, metal to

metal secondary seal)

The valves come complete with the fundamental check valve which will avert reverse flow from tubing to

casing.

Available in a top and bottom latch configuration

The valve is compatible with all standard top latches giving its application more versatility

MONEL or Tungsten Carbide seat can be replaced easily for servicing

Various packing elements are available to meet the well condition

These valves can be coated if necessary to meet the most demanding applications

RCR-1 RCR-2 RCR-BL1

-61-

SPECIFICATIONS

Valve Model RCR-1

Valve OD 1in

Ab Effective Bellows Area 0.31 in2

Port Size 1/8in 5/32in 3/16in 1/4in 5/16in

Are of Port 0.013in2 0.021in2

0.029in2 0.052in2

0.08in2

Ap/Ab Ratio 0.042 0.067 0.095 0.166 0.257

1-(Ap/Ab) 0.958 0.933 0.905 0.834 0.743

PPEF2 Ap/Ab/（1-(Ap/Ab)） 0.044 0.072 0.105 0.199 0.346

SPECIFICATIONS

Valve Model RCR-2

Valve OD 1.5in

Ab Effective Bellows Area 0.77i n2



0.08in2 0.114in2

0.154in2

Ap/Ab Ratio 0.038 0.067 0.104 0.148 0.2

1-(Ap/Ab) 0.962 0.933 0.896 0.8 0.739

PPEF2 Ap/Ab/（1-(Ap/Ab)） 0.04 0.072 0.115 0.174 0.25

-62-

INJECTION PRESSURE-OPERATED TUBING-RETRIEVABLE

VALVES (IPO)

1.These valves are used for intermittent or continuous flow applications

Features

3Ply MONEL bellows for durability and reliability

Filling the bellows with silicon fluid protects the bellows from hydrostatic forces (pressure) in the

well by forming a hydraulic barrier. This silicon fluid also minimizes the vibrations and chattering

which prevents the seat from any damage

MONEL or Tungsten Carbide seat can be replaced easily for servicing

The reverse flow check valve helps to avoid costly work over procedures

Double check valves can easily be added for greater protection and reliability

The maximum travel stop feature eliminates the risk of bellow stacking and increases their cycle life

Operating efficiency is improved by the large dome component

Valves are available in any material, primarily Stainless steel or Nickel - Copper Alloys


-63-

SPECIFICATIONS

Valve Model RCC-1

Valve OD 1 in




0.013in2 0.013in2

0.013 in2

Ap/Ab Ratio 0.042 0.042 0.042 0.042 0.042

1-(Ap/Ab) 0.958 0.958 0.958 0.958 0.958

PPEF2 Ap/Ab/（1-(Ap/Ab)） 0.044 0.044 0.044 0.044 0.044

SPECIFICATIONS

Valve Model RCR-2

Valve OD 1.5in




0.029in2 0.029in2

0.029in2

Ap/Ab Ratio 0.038 0.038 0.038 0.038 0.038

1-(Ap/Ab) 0.962 0.962 0.962 0.962 0.962

PPEF2 Ap/Ab/（1-(Ap/Ab)） 0.04 0.04 0.04 0.04 0.04

-64-

SINGLE-POINT-INJECTION WIRELINE-RETRIEVABLE

ORIFICE VALVES

1. Ascertain the link between the tubing and annulus in circulating operations

2. Continuous flow

3. Used at the lowest region of the tubing for stable injection

Features

The wireline retrievable feature of these valves means the there is no need to pull the entire tubing

for maintenance or exchange

Valves are available in any material, primarily Stainless steel and MONEL material


Specifications

The spring loaded reverse flow check valve helps to avoid costly work over procedures

Variations on port/orifice sizes from 1/8 to 1/2 inch diameter

All orifices are fully replaceable

SPECIFICATIONS

Valve Model RRO-1 RRO-1

Valve OD 1in 1.5in

-65-

PRODUCTION-OPERATED VALVES

1. Spring loaded (INCONEL spring) for installations that use tubing pressure for valve function

2. Unique seat design reduces injection pressure build up

3. Used in continuous flow gas lift application

4. Used for dual gas lift systems under unstable conditions

Features

The wireline retrievable feature of these valves means the there is no need to pull the entire

tubing for maintenance or exchange

Port size ranges from 1/8. to 3/16.

INCONEL spring loaded valve

Not sensitive to temperatures

The reverse flow check valve helps to avoid costly work over procedures (elastomer

primary seal, metal to metal secondary seal)

3Ply MONEL bellows for durability and reliability

Silver brazed bellow assembly

Packing element available in many materials depending on the user

High pressure spring available

The maximum travel stop feature eliminates the risk of bellow stacking and increases

their cycle life

The valve is compatible with all standard top latches giving its application more

versatility

RCF-2 RCF-BL1

The bellows have an internal guidance system which prevents corkscrewing and increases the cycle life of

the bellow

Available in bottom latch model

Seat can be made from any material, including Tungsten Carbide

-66-

SPECIFICATIONS

Valve Model RCF-BL1

Valve OD 1 in

Ab Effective Bellows Area 0.31in



0.013in2 0.013in2

0.013 in2

Ap/Ab Ratio 0.042 0.042 0.042 0.042 0.042

1-(Ap/Ab) 0.958 0.958 0.958 0.958 0.958

PPEF2 Ap/Ab/（1-(Ap/Ab)） 0.044 0.044 0.044 0.044 0.044

SPECIFICATIONS

Valve Model RCF-2

Valve OD 1.5in

Ab Effective Bellows Area 0.77in



0.029in2 0.029in2

0.029 in2

Ap/Ab Ratio 0.038 0.038 0.038 0.038 0.038

1-(Ap/Ab) 0.962 0.962 0.962 0.962 0.962

PPEF2 Ap/Ab/（1-(Ap/Ab)） 0.04 0.04 0.04 0.04 0.04

ROCK COMPLETION TOOL - sumeraca.com€¦ · Contactos USA +1 (832) 5484601 Argentina +54 9 11...

Documents

Transcript of ROCK COMPLETION TOOL - sumeraca.com€¦ · Contactos USA +1 (832) 5484601 Argentina +54 9 11...