RMI-RMP L100.05 us B RMIand RMP multi-couplings for fast ... · 4 RMI-RMP RMIand RMP...
Transcript of RMI-RMP L100.05 us B RMIand RMP multi-couplings for fast ... · 4 RMI-RMP RMIand RMP...
4
RMI-RMP RMI and RMP multi-couplingsfor fast tool change on injectionmolding and die cast equipment
Applicationto organize the connection
of :
n temperature control circuitswith RMI 206, 209, 212, 216
or
n high pressure hydrauliccircuitswith RMP 48 and RMP 78multi-couplings
L100.05 us B
4
®
SA
AR
AH
AN
NE
CY
- 1
0.09
.200
4
SALES COORDINATIONSTÄUBLI FAVERGESB.P. 70 -74210 FAVERGES FRANCETEL 04 50 65 67 97 - FAX 04 50 65 60 69Internet : http://www.staubli.com/ E-mail : [email protected]
is a registered trademark of STÄUBLI INTERNATIONAL AG
STÄUBLI CORPORATION
P.O. BOX 189 - DUNCAN - S.C. 29334
PHONE 864/433-1980
TOLL-FREE NUMBER 800/845-9193
TELEFAX 864/4865498
E-mail: [email protected]
Pages
n 4 or 6 couplings 3/8” - 8 mm 16-17passage ∅
Summary
Pages
n RMI 206 : 6 couplings1/4” - 6 mm passage ∅ 5
n RMI 209 : 6, 12 or 20 couplings3/8” - 9 mm passage ∅ 6-11
n RMI 212 : 20 couplings1/2” - 12 mm passage ∅ 12-13
n RMI 216 : 10 or 12 couplings5/8” - 16 mm passage ∅ 14-15
I - RMI multi-couplings for temperature control circuit
II - RMP multi-couplings for anti-pollution high pressure hydraulic circuits
III - Flexible hoses for temperature control circuits
RMI 200 multi-couplings
RMP 48 multi-couplingsCompact construction1/2 turn quick locking system
n 4 or 6 couplings 3/8” - 8 mm 18-19passage ∅
RMP 78 multi-couplingsCompact constructionQuick screw type locking mechanism
RMI 209 multi-couplingsCompact construction
Pages
20-21
NYLFLEX : PVC hoses for hot water up to 140 °FCALOREL-EC : cold and hot water circuits up to 230 °FCALOREL-S : hot oil circuits up to 284 °F
3
n 10 couplings 3/8” - 9 mm 7passage ∅
RMI 06.4101
RMI 06.42011/4 NPT female thread
1/4 BSP female thread
5/16” hose inside diameter
RMI 06.2808/JV3/8” hose inside diameter
RMI 06.2810/JV(2 parts assembly)
54
RMI 206, 209, 212 and 216multi-couplingsfor temperature control circuits
Semi-automatic lock multi-couplingplates incorporating, within compactoverall dimensions :n 16 couplings (3 circuits)
n 10 couplings (5 circuits)
n 12 couplings (6 circuits), or
n 20 couplings (10 circuits)
of 1/4" - 6 mm, 3/8" - 9 mm,1/2" - 12 mm or 5/8" - 16 mmpassage ø.
Shut-off valves on mold siderecommended on all hot oil circuits.
1. All components on the RMI 209fixed plate are totally built-in toprotect the plugs during handling.
2. Quick locking system :1/2 turn camlock.Simply pushing the mobile platetowards the fixed plate (RMI 206only).
3. Polarized mobile plate eliminatesconnection errors.
4. Circuits are numbered on bothfixed and mobile side.
5. Easy plug attachment to fixedplate.
6. Seals are suitable for both hot andcold fluids (consult STÄUBLI onhot oil applications).
7. Mold side : available with shut-offvalves.
8. 2 possible executions of RMI 209fixed plate :a. aluminium.b. 30% glass-fibre reinforced poly-propylene.
RMI 206 multi-couplings
PART NUMBERS
RMI 206.06.1808/JV
RMI 206.06.6000
2. RMI 206 fixed multi-coupling plates on mold side,will receive up to 6 plugs of 1/4” I.D. - 6 mm passage øFixed plate supplied with 1 shut-off plug for locking and flow passage.RMI 06 plugs : see § n° 3 to n° 6.
Description
Dimensions : mm (inches)
81 (3.19”)
50(1.97”)
532.09”)
40 (1.57”)50 (1.97”)
130
(5.1
2”)
120
(4.7
2”)
130
(5.1
2”)
RMI 06.2101/JV
RMI 06.2201/JV
1/4 BSP female thread
1/4 NPT female thread
RMI 06.5101/JV
AF 151.08/RE
RMF 151.101
4. RMI 06 shut-off valve plugs with 1/4 BSP female thread,for RMI 206 mold base fixed multi-coupling plates (no 2)
6. Adaptor male BSP 1/4 - female BSP 1/4
7. Built-in RMI 06 shut-off sockets for 5/16” or 3/8” hose inside diameterfor RMI 206 mobile multi-coupling plates for press side (no 1)
8. Built-in RMI 06 shut-off sockets - female 1/4 BSP or NPTfor RMI 206 mobile multi-coupling plates for press side (no 1)
1/4
BS
P o
r N
PT
17/flats (0.67”/flats)
Ø 16 (0.63”)
1/4
BS
P
17/flats (0.67”/flats)
1/4 BSP
1/4
BS
P
17/flats (0.67”/flats)
18
(0.71”)
1/4
BS
P
17/flats (0.67”/flats)Ø 5/16” or 3/8”
Ø 16 (0.63”)
Ø 5/16”
Ø 16 (0.63”)
4
1
7
6
2
3
5
17/flats (0.67” flats)
1/4
BS
P o
r N
PT
1. RMI 206 mobile multi-coupling plates on press sidewith 6 shut-off sockets of 1/4” I.D.for 5/6” hose inside diameter.
3. RMI 06 full flow plugs with 1/4 BSP or NPT female thread,for RMI 206 mold base fixed multi-coupling plates (no 2)
5. 90° elbows for flexible hosewith 5/16” inside ø -male 1/4 BSP
Ø 16 (0.63”)
Technical data :Seals : Fluorocarbon (FPM) ;
Ethylene-propylene (EPDM) :consult us.
76
RMI 209 multi-couplings6 couplings (3 circuits)
Press side
PART NUMBERS
Press side
RMI 209 fitted with 6 RMI 09sockets for 3/8” hoseinside diameter
RMI 209.06.1810/JV
RMI 209 fitted with 6 RMI 09sockets for 1/2” hoseinside diameter
RMI 209.06.1812/JV
PART NUMBERS
RMI 209.06.6000
3. RMI 209 fixed multi-coupling plates on mold sidewill receive up to 6 RMI 09 plugsFixed plates supplied without plugs. RMI 09 plugs : see § nos 17 to 20 and 23 to 26.
140
(5.5
1”)
120
(4.7
2”)
70 (2.75”)82 (3.23”)
60 (2.36”) 14 (0.55”)
2. RMI 209 mobile multi-coupling plates on press sidewith 6 RMI 09 shut-off sockets. 3/8 BSP female thread
RMI 209.06.1102/JV
3/8 NPT female thread
RMI 209.06.1202/JV
Mold side
164 (6.46”)
198
(7.7
9”)
102
(4.0
1”)
1. RMI 209 mobile multi-coupling plates on press sidewith 6 RMI 09 shut-off sockets.
78 (3.07”) 31.5(1.24”)
68.5 (2.70”)
164 (6.46”)
198
(7.7
9”)
102
(4.0
1”)
78 (3.07”)
(1.24”) (2.70”)
RMI 209.10.1812/JV
4. RMI 209 mobile multi-coupling plates on press side with 10 RMI 09 shut off sockets
196
(7.7
2”)
154
(6.0
6”)
21 (0.8
3”)
3/8 BSP22/flats(0.87”/flats)
44 (1.73”)
88 (3.46”)
44(1
.73”
)66
(2.
60”)
45
(1.77”)
26
(1.02”)2 sc
rew
s C
Hc
2 bo
res
M8
thre
ad d
epth
10
(0.3
9”)
PART NUMBERS
RMI 209.10.6102/JV
5. RMI 209 fixed multi-coupling plates on mold sidefitted with 10 RMI 09 full flow plugs3/8 BSP female thread side connections.
RMI 209.10.7102/JV
196
(7.7
2”)
154
(6.0
6”)
21 (0.8
3”)
3/8 BSP22/flats(0.87”/flats)
44 (1.73”)
88 (3.46”)
44(1
.73”
)66
(2.
60”)
45
(1.77”)
26
(1.02”)2 sc
rew
s C
Hc
M8
2 bo
res
M8
thre
ad d
epth
10
(0.3
9”)
6. RMI 209 fixed multi-coupling plates on mold sidewith 10 RMI 09 shut-off plugs 3/8 BSP female thread side connections.
Mold side
Compact construction10 couplings (5 circuits)
154
(6.0
6”)
78 (3.07”)
31
(1.22”)
68,5 (2.70”)
8 9
Press side
RMI 209 multi-couplings12 couplings (6 circuits)
181 (7.12”)152 (5.98”)
66 (
2.60
”)85
(3.
35”)
4 bores M6-6H
18(0
.71”
)
48(1
.89”
)
N 003.112.93
13. Parking plate RMI 209for RMI 209 mobile multi-coupling plates.
Mold side
8. RMI 209 mobile multi-coupling plates on press sidewith 12 RMI 209 shut-off sockets. 3/8 BSP female thread
RMI 209.12.1102/JV
3/8 NPT female thread
RMI 209.12.1202/JV
154
(6.0
6”)
78 (3.07”)31
(1.22”) 68,5 (2.70”)
RMI 209.12.1105/JV
9. RMI 209 mobile multi-coupling plates on press side with centralized inlet and outlet circuits- female BSP 1”.
78 (3.07”)
154
(6.0
6”)
68,5 (2.70”)
1 B
SP
1 B
SP
PART NUMBERS7. RMI 209 mobile multi-coupling plates on press sidewith 12 RMI 209 shut-off sockets.
RMI 209 fitted with 12 RMI 09sockets for 3/8” hoseinside diameter
RMI 209.12.1810/JV
RMI 209 fitted with 12 RMI 09sockets for 1/2” hoseinside diameter
RMI 209.12.1812/JV
154
(6.0
6”)
78 (3.07”)
31
(1.22”)
68,5 (2.70”)
RMI 209.12.1104/JV
10. RMI 209 mobile multi-coupling plates on press side with centralized inlet and outlet circuits :- female BSP 1/2” for 2 circuits- female BSP 3/4” for 4 circuits.
78 (3.07”)
154
(6.0
6”)
3/4
BS
P
1/2
BS
P
31
(1.22”)
68,5 (2.70”)
31
(1.22”)
RMI 209.12.6000/L
RMI 209.12.6002
12. RMI 209 fixed multi-coupling plates on mold side will receive up to 12 RMI 09 plugsfixed plates supplied without plugsRMI 09 plugs : see § n° 17 to 20 and 23 to 26.
11. RMI 209 fixed multi-coupling plates on mold sidewill receive up to 12 RMI 09 plugs Fixed plates supplied without plugsRMI 09 plugs : see § n° 17 to 20 and 23 to 26.
95.5 (3.76”)
66 (2.60”)(2)(1) 4 M8 screws(2) 4 M6 screws
200
(7.8
7”)
175
(6.8
9”)(1
)
152
(5.9
8”)(2
)
70 (2.75”)(1)
4 x
M6
4 x
M8
40 (1.57”)
100 (3.94”)
PART NUMBERS
1110
RMI 209 multi-couplings20 couplings (10 circuits)
PART NUMBERS
Press side
RMI 209.20.1812/JV
RMI 209 fitted with 20 RMI 09sockets for 1/2” hoseinside diameter
RMI 209.20.1810/JV
RMI 209 fitted with 20 RMI 09sockets for 3/8” hoseinside diameter
104 (4.09”)
206
(8.1
1”)
31
(1.22”)
68,5 (2.70”)
14. RMI 209 mobile multi-coupling plates on press sidewith 20 RMI 09 shut-off sockets.
RMI 209.20.6000
16. RMI 209 fixed multi-coupling plates on mold sidewill receive up to 20 RMI 09 plugsFixed plates supplied without plugs. RMI 09 plugs : see § nos 17 to 20 and 23 to 26.
206
(7.1
1”)
186
(7.3
2”)
84 (3.31”) 60 (2.36”)
Ø 3
5(0
.33”
)
104 (4.09”)100 (3.94”)110 (4.33”)
14 (0.55”)
RMI 09 couplings for RMI 209 multi-couplings*
3/8 BSP female thread
RMI 209.20.1102/JV
3/8 NPT female thread
RMI 209.20.1202/JV
15. RMI 209 mobile multi-coupling plates on press sidewith 20 RMI 09 shut-off sockets
Mold side
(2 parts assembly)
PART NUMBERS17. RMI 09 full flow plugs with 3/8 BSP or NPT female threadfor RMI 209 fixed multi-coupling plateson mold side(nos 3, 11, 12 and 16)
19. 90° elbows for flexible hosefor 3/8” or 1/2” hoseinside diameter
20. Adaptor male 3/8 BSP -female 3/8 BSP or NPT
21. Built-in RMI 09 shut-off sockets for 3/8” or 1/2”inside hose diameterfor RMI 209 mobile multi-coupling plates for press side(nos 1, 4, 7 and 14)
22. Built-in RMI 09 shut-off sockets with 3/8 BSPor NPT female threadfor RMI 209 mobile multi-couplingplates for press side(nos 2, 8, 15)
3/8
BS
P
or
3/
8N
PT
22/flats (0.87”/flats)
3/8 BSP
Ø 3/8” or 1/2”
3/8
BS
P
or
3/8
NP
T
22/flats (0.87”/flats)
L*
* RMF 152.102 :L = 21 (0.83”)RMF 152.202 :L = 17 (0.67”)
3/8
BS
P
22/flats (0.87”/flats)
Ø 3/8” or 1/2”
22/flats (0.87”/flats)
3/8
BS
P
or
3/8
NP
T
Ø 19 (0.75”)
Ø 19 (0.75”)
Ø 19 (0.75”)
3/8 BSP female thread
RMI 09.41023/8 NPT female thread
RMI 09.42023/8 BSP female thread
RMI 09.5102/JV3/8 NPT female thread
RMI 09.5202/JV
AF 152.10/RE1/2” inside hose diameter
AF 152.12/REmale 3/8 BSP - female 3/8 BSP
RMF 152.102male 3/8 BSP - female 3/8 NPT
RMF 152.2023/8” hose inside diameter
RMI 09.2810/JV1/2” hose inside diameter
RMI 09.2812/JV3/8 BSP female thread
RMI 09.2102/JV3/8 NPT female thread
RMI 09.2202/JV3/8” hose inside diameter
RMI 09.4810/RE1
1/2” hose inside diameter
RMI 09.4812/RE1
3/8” hose inside diameter
RMI 09.5810/JV/RE1
1/2” hose inside diameter
RMI 09.5812/JV/RE1
3/8” hose inside diameter
RMI 09.4810/RE2
1/2” hose inside diameter
RMI 09.4812/RE2
3/8” hose inside diameter
RMI 09.5810/JV/RE2
1/2” hose inside diameter
RMI 09.5812/JV/RE2
23. RE 1 compact full-flow 90° elbow plugwith 3/8” or 1/2” hose inside diameter
24. RE 1 compact 90° elbow plug with shut-offwith 3/8” or 1/2” hose inside diameter
25. RE 2 full flow 90° elbow plugwith 3/8” or 1/2” hose inside diameter
26. RE 2 90° elbow plug with shut-offwith 3/8” or 1/2” hose inside diameter
22/flats (0.87”/flats)
3/8
BS
Por
3/8
NP
T
Ø 19 (0.75”)
18. RMI 09 shut-off valve plugs with 3/8 BSP or NPT female threadfor RMI 209 fixed multi-coupling plateson mold side (nos 3, 11, 12 and 16)
3/8” inside hose diameter
* For mobile or fixed multi-couplings, part-numbers § 1 to 4 and 7 to 15 (except 13).
206
(8.1
1”)
104 (4.09”)
(1.22”)
68,5 (2.70”)31
s
s
s
s
s
s
s
s
Ø 3/8 or 1/2
Ø 3/8 or 1/2
Ø 3/8 or 1/2
Ø 3/8 or 1/2
13
RMI 212 multi-couplings20 couplings (10 circuits)
PART NUMBERS
RMI 212.20.1816/JV
RMI 212.20.6000
1. RMI 212 mobile multi-coupling plates on press sidewith 20 RMI 12 shut-off sockets for 5/8” hose inside diameter
3. RMI 212 fixed multi-coupling plates on mold basewill receive up to 20 RMI 12 plugsFixed plates supplied without plugs. RMI plugs : see § n° 4 to 7.
Press side
222 (8.74”)
230
(9.0
5”)
250
(9.8
4”)
300
(11.
81”)
78(3
.07”
)
113 (4.45”)184 (7.24”)
130 (5.12”)
90 (3.54”)
250
(9.8
4”)
230
(9.0
5”)
Ø 9
(0.3
5”)
113 (4.45”)130 (5.12”)
14
(0.55”)
12
RMI 12.4103
RMI 12.4203/JV
RMI 12.5103/JV
AF 153.16/RE
RMF 153.103
RMI 12.2816/JV
4. RMI 12 full flow plugs with 1/2 BSP or NPT female threadfor RMI 212 fixed multi-coupling plateson mold side (n° 3)
5. RMI 12 shut-off valve plugswith 1/2 BSP or NPT female threadfor RMI 212 fixed multi-coupling plateson mold side (n° 3)
6. 90° elbows for flexible hosewith 5/8” hose inside diameter -male 1/2 BSP
7. Adaptors male 1/2 BSP - female 1/2 BSP
8. Built-in RMI 12 shut-off socketsfor 5/8” hose inside diameterfor RMI 212 mobile multi-couplingplates for press side (n° 1)
9. Built-in RMI 12 shut-off socketswith 1/2 BSP or NPT female threadfor RMI 212 mobile multi-couplingplates for press side (n° 2)
1/2
BS
P o
r N
PT
1/2 BSP
Ø 5/8”
1/2
BS
P
27/flats (1.06”/flats)
32 (1.26”)
1/2
BS
P
27/flats (1.06”/flats)
Ø 5/8”
27/flats (1.06/flats)
27/flats (1.06/flats)
1/2
BS
P o
r N
PT
Ø 24 (0.94”)
Ø 24 (0.94”)
27 flats (1.06”/flats)
1/2
BS
P o
r N
PT
Ø 24 (0.94”)
2. RMI 212 mobile multi-coupling plates on press sidewith 20 RMI 12 shut-off sockets 1/2 BSP female thread
RMI 212.20.1103/JV
1/2 NPT female thread
RMI 212.20.1203/JV
Mold side
1/2 BSP female thread
1/2 BSP female thread
RMI 12.5203/JV
1/2 NPT female thread
1/2 NPT female thread
RMI 12.2103/JV
1/2 BSP female thread
RMI 12.2203/JV
1/2 NPT female thread
Part numbers
RMI 12 couplingsfor RMI 212 multi-couplings
222 (8.74”)
230
(9.0
5”)
250
(9.8
4”)
300
(11.
81”)
78(3
.07”
)
113 (4.45”)184 (7.24”)
130 (5.12”)
PART NUMBERS
PART NUMBERS
6. RMI 216 fixed multi-coupling plates on mold side will receive up to 12 RMI 16 plugs.Fixed plates supplied with 4 spacers and locking system. RMI 16 plugs : see § n°7 and 8
1514
3. RMI 216 mobile multi-coupling plates on press sidewith 10 RMI 16 shut-off sockets (5 circuits) for 3/4” hose inside diameter.
RMI 216 multi-couplings12 couplings (6 circuits)
PART NUMBERS
RMI 216.10.1819/JV
1. RMI 216 mobile multi-coupling plates on press sidewith 12 RMI 16 shut-off sockets for 3/4” hose inside diameter.
RMI 216.12.1819/JV
2. RMI 216 mobile multi-coupling plates on press sidewith 12 RMI 16 shut-off sockets. 3/4 BSP female thread
RMI 216.12.1104/JV
3/4 NPT female thread
RMI 216.12.1204/JV
4. RMI 216 mobile multi-coupling plates on press sidewith 10 RMI 16 shut-off sockets (5 circuits) 3/4 BSP female thread
RMI 216.10.1104/JV
3/4 NPT female thread
RMI 216.10.1204/JV
Press sideMold side
5a. RMI 216 fitted with12 RMI 16 full flow plugs
3/4 BSP female thread
RMI 216.12.61043/4 NPT female thread
RMI 216.12.6204according to N 011 205 955b. RMI 216 fitted with12 RMI 16 shut-off plugs
3/4 BSP female thread
RMI 216.12.7104/JV3/4 NPT female thread
N 003 381 94
5. RMI 216 fixed multi-coupling plates on mold side with 12 RMI 16 plugs.Fixed plates supplied with 4 spacers and 2 90° elbows.3/4 BSP or NPT female thread connections.
150 (5.90”)125 (4.92”)
250
(9.8
4”)
225
(8.8
6”)
153 (6.02”)
115 (4.53”)54
(2.12”)30 mini(1.18”)
M 1
2
3/4 BSP or NPT
Plate with 3/4 NPT thread
N 011 208 95
RMI 216.12.6000
Plate with 3/8 BSP thread150 (5.90”)125 (4.92”)
250
(9.8
4”)
225
(8.8
6”)
115 (4.53”)
M 1
2
54(2.12”)
RMI 16.6155
7. RMI 16 full flow plugswith 1 BSP male threadfor RMI 216 fixed multi-couplingplates on mold side (nos 6)
RMI 16.7155/JV
8. RMI 16 shut-off plugswith 1 BSP male threadfor RMI 216 fixed multi-couplingplates on mold side (nos 6)
RMF 154.104/RE
9. 90° elbowsmale 3/4 BSP - female 3/4 BSPfor RMI 216 fixed multi-couplingplates on mold side (nos 6)
RMI 16.2819/JV
10. Built-in RMI 16 shut-off socketsfor 3/4” hose inside diameterfor RMI 216 mobile multi-couplingplates on press side (nos 1 and 3)
3/4 BSP female thread
RMI 16.2104/JV3/4 NPT female thread
RMI 16.2204/JV
11. Built-in RMI 16 shut-off socketsfor 3/4 BSP or NPT female threadfor RMI 216 mobile multi-couplingplates on press side (nos 2 and 4)
206
186
84
Ø 8
,5
36/flats (1.42”/flats)
1 B
SP
36/flats (1.42”/flats)
1 B
SP
36/flats (1.42”/flats)
3/4
BS
P
3/4 BSP
36/flats (1.42”/flats)
36/flats (1.42”/flats)
3/4
BS
Por
3/4
NP
T
38 (1.50”)
38 (1.50”)
Ø 3/4”
Ø 30 (1.18”)
Ø 30 (1.18”)
30 mini(1.18”)
Part numbers
3. RMP 48 mobile multi-coupling plates on press sidewith 6 non-spill, flush faced SPH 08 plugs.
1. RMP 48 mobile multi-coupling plates on press sidewith 4 non-spill, flush faced SPH 08 plugs(2 circuits).
1716
1. Sockets and plugs are non-spilldesign.
2. All components of the fixed plate(SPH 08 sockets and lockingsystem) are fully built-in andcannot be damaged when toolsare handled.
3. Compact multi-couplingmanifold design.
4. Simple and easy lockingmechanism. Removable nonscrewed locking handle preventingaccidental disconnection.
5. Safety keyed.The mobile plate only connects inone position : any mistake inconnection is impossible.
6. Carrying handle on the mobileplate.
4
2
6
1
5
3
2 bores M8-6H
25
(0.9
8”)
112
(4.4
1”)
40(1
.57”
)
240 (9.45”)
190 (7.48”)
35(1
.38”
)
PART NUMBERS
RMP 48.04.1102/JV
Description
5. Parking plate RMP 48for RMP 48 mobile multi-coupling plates.
RMP 48 multi-couplingsfor anti-pollution high pressure hydraulic circuitsCompact construction1/2 turn quick locking system
Manual multi-coupling plateswith compact overalldimensions :
n 4 couplings (2 circuits)or
n 6 couplings (3 circuits)
non-spill, flush face SPH 08 3/8" diameter.
Max. operating pressure :2300 PSI, on 3 couplings.It is recommended to balance theforces.
21
110 (4.33”)
36(1.42”)
36(1.42”)
3/8 BSP
134
(5.2
7”)
21
A A
2 bores M10-6Hthread depth 25
(0.98”)
47±0.1(1.85” ± 0.004)
36(1.42”)
86 (
3.38
”)
21
(0.8
3”)
BS
P 3
/8A-A
2. RMP 48 fixed multi-coupling plates on mould sidefitted with 4 non-spill, flush faced SPH 08 sockets.
4. RMP 48 fixed multi-coupling plates on mold sidefitted with 6 non-spill, flush faced SPH 08 sockets.
3/8 BSP female thread
1/2 NPT female thread
UN 9/16-18 female thread
RMP 48.04.1203/JV
RMP 48.04.1314/JV
RMP 48.06.1102/JV
3/8 BSP female thread
1/2 NPT female thread
UN 9/16-18 female thread
RMP 48.06.1203/JV
RMP 48.06.1314/JV
RMP 48.06.7102/JV
3/8 BSP female thread
1/2 NPT female thread*
UN 9/16-18 female thread*
RMP 48.06.7203/JV
RMP 48.06.7314/JV
N 003 111 93
RMP 48.04.7102/JV
3/8 BSP female thread
1/2 NPT female thread
UN 9/16-18 female thread
RMP 48.04.7203/JV
RMP 48.04.7314/JV
18
(0.7
1”)
NP
T o
r U
N
110 (4.33”)
134
(.27
”)
A A
2 bores M10-6Hthread delpth 25
(0.98”)
47±0,136
(1.42”)
86 (
3.38
”)
21
A-A
(G 3
/8)
18 (
0.71
”) N
PT
or
UN
(1.85”±0.004”
Plug-inhandle
168 (6.61")
R
168 (6.61")
R
Plug-inhandle
R
R
delivered without nippel
*delivered without nippel
2 bores M10-6Hthread delpth 25
(0.98”)
47±0,136
(1.42”)
86 (
3.38
”)
A-A
(1.85”±0.004”
3/8 BSP female thread
2 bores M8-6H
25
(0.9
8”)
112
(4.4
1”)
40(1
.57”
)
240 (9.45”)
35(1
.38”
)
18
RMP 78 multi-couplingsfor anti-pollution high pressure hydraulic circuitsCompact constructionQuick screw type locking mechanism
1. Sockets and plugs are non-spilldesign.
2. All components of the fixed plate(SPH 08 sockets and lockingsystem) are fully built-in and cannotbe damaged when tools arehandled.
3. Drilled and tapped compactmulti-coupling block with reducedoverall dimensions.
4. Robust and reliable locking for easyconnection with fast screw thread.
5. Non-inversion circuit.The mobile plate only connects inone position : any mistake inconnection is impossible.
6. Carrying handle on the mobileplate.
Manual multi-coupling plates withcompact overall dimensions :
n 4 couplings (2circuits)or
n 6 couplings (3 circuits)
non-spill, flush faced SPH 083/8" diameter.
Max operating pressure :2300 PSI.
It is recommended to balance the forces
1
3
2
6
4
5
1. RMP 78 mobile multi-coupling plates on press sidewith 4 non-spill, flush faced SPH08 plugs.
19
2 bores M10-6Hthread depth 25
(0.98”)
47±0,136
(1.42”)
86 (
3.38
”)
21 (
0.83
”)
A-A
110 (4.33”)
36(1.42”)
36(1.42”)
3/8 BSP
134
(5.2
7”)
A A
190 (7.48”)
DescriptionPART NUMBERS
2. RMP 78 fixed multi-coupling plates on mold sidewith 4 non-spill, flush faced SPH08 sockets.
3. RMP 78 mobile multi-coupling plates on press sidewith 6 non-spill, flush faced SPH08 plugs.
4. RMP 78 fixed multi-coupling plates on mold sidewith 6 non-spill, flush faced SPH08 sockets.
5. Parking plate RMP 48 for RMP 78 mobile multi-coupling plates.
N 003 111 93
(1.85” ± 0.004)
151
134
R
151
134
RR
UN 9/16-18 female thread
1/2 NPT female thread
RMP 78.06.1102/JV
RMP 78.06.1203/JV
RMP 78.06.1314/JV
UN 9/16-18 female thread*
1/2 NPT female thread*
3/8 BSP female thread
RMP 78.06.7102/JV
RMP 78.06.7203/JV
RMP 78.06.7314/JV110 (4.33”)
134
(.27
”)
A A
(G 3
/8)
18 (
0.71
”) N
PT
or
UN
UN 9/16-18 female thread
3/8 BSP female thread
1/2 NPT female thread
3/8 BSP female thread
RMP 78.04.1102/JV
RMP 78.04.1203/JV
RMP 78.04.1314/JV
RMP 78.04.7102/JV
1/2 NPT female thread
RMP 78.04.7203/JV
UN 9/16-18 female thread
RMP 78.04.7314/JVdelivered without nippel
*delivered without nippel
32.80 ft roll
32.80 ft roll
2120
Flexible hosesfor temperature control circuits
Applicationn Cold water.n Hot water up to 140°F.
Compositionn Integral flexible PVC hose, with
2 layers holding an intermediatepolyester fiber braided reinforcement.
PresentationClear crystal colored hose, with NYLFLEXmarking.
Characteristicsn Compatible with numerous fluids.
n Very low pressure drop.
n Excellent rate of flexibility at temperature above 40°F.
NYLFLEX - Reinforced PVC hoses for hot water up to 140°F.
CALOREL - EC for cold or hot water circuits
Applicationsn Cold water, hot water.n Overheated water up to 230°F max.n Water glycol down to -22°F.
Characteristicsn Good resistance to ozone
atmosphere and weather.n Good resistance to industrial
environment.Compositionn EPDM* inner braid.n 2 intermediary reinforcement textile
braids.n Outer braid : black chloroprene with
a red or blue line.* no contact with hydrocarbons and oils
NOMINALBORE
INCHES
OUTSIDEØ
INCHES
WORKINGPRESSURE
PSI
MAX.TEMP.
°F
MIN. BENDRADIUSINCHES
WEIGHTOZ/FT
STÄUBLI RECOM.RADIATOR CLAMPS
CALOREL-ECPART-NUMBERS
3/8” .70 100 230 1.61 2.47 ABA 13-20 CALOREL EC 10
1/2” .80 100 230 2.09 2.79 ABA 15-24 CALOREL EC 12
INSIDEØ (INCH)
5/16” NYLFLEX 08
3/8”
1/2”
1/2”
OUTSIDEØ (INCH)
9/16”
5/8”
3/4”
13/16”
WORKING PRES.AT 68°F (PSI)
200
200
200
200
BURST PRESS.AT 68°F (PSI)
870
870
870
870
MAXITEMP. (°F)
+ 140
+ 140
+ 140
+ 140
RADIUS OFBEND (INCH.)
1.06”
1.46”
1.77”
2”
WEIGHT(OZ/FT.)
1.34
1.56
2.31
2.42
STÄUBLI RECOM.EAR CLAMPS
NYLFLEX HOSE*PART NUMBERS
CL 1015
CL 1018
CL 1020
CL 1021
NYLFLEX 10
NYLFLEX 12
NYLFLEX 13
CLC 0140
STÄUBLI RECOM.EXTRA-FLAT CLAMPS
CLC 0155
CLC 0190
ABA 11-17
STÄUBLI RECOM.RADIATOR CLAMPS
ABA 13-20
ABA 15-24
ABA 15-24
Assemblyn Must be assembled with STÄUBLI
ABA radiator clamps and STÄUBLIprofile hose tails for rubber hose.
* For identification of the circuits, these hoses are also available in red color : add KR to the part number.blue color : add KB to the part number.
* Delivered in roll of 82 ft. Roll of 164 ft : add 50 to the part number.
CALOREL - S for hot oil circuits
Applicationn Mineral heat transfer fluids up to
284°F operating temperature.
Characteristicsn Good resistance to ozone
atmosphere and weather.n Good resistance to industrial
environment.
Assemblyn Must be assembled with STÄUBLI
ABA 15-24 radiator clamps andSTÄUBLI profile hose tails for rubberhose.
Compositionn Black synthetic rubber outer and
inner braid.n 1 intermediary reinforcement textile
braid.
NOMINALBORE
INCHES
OUTSIDEØ
INCHES
WORKINGPRESSURE
PSI
MAX.TEMP.
°F
MIN. BENDRADIUSINCHES
WEIGHTOZ/FT
STÄUBLI RECOM.RADIATOR CLAMPS
CALOREL-SPART-NUMBERS
3/8” .70 100 284 3.15 2.90 ABA 15-24
1/2” .80 100 284 3.78 3.12 ABA 15-24
CALOREL S 10
82 ft roll
CALOREL S 10/25
CALOREL S 12
82 ft roll
CALOREL S 12/25
* Delivered in roll of 65.6 ft.
We reserve the right to modify product specifications without prior notice.
22
Notes