Rittal - Data Centre Efficiency
-
Upload
datacenters -
Category
Technology
-
view
540 -
download
18
Transcript of Rittal - Data Centre Efficiency
2
Rittal – Data Centre Efficiency
Savings with IT infrastructure solutions R R
Rittal – Complete IT Competence
Rittal Data Centre Efficiency
iencyUse your efficiency potential for better productivity
With Rittal at your side, you get efficiency times four: Efficiency with
energy, security, availability and synergy. However large or small your
company, the potential savings in your data centre are considerable.
For example, Rittal system climate control will boost energy efficiency
by up to 50 percent. System simplification also offers efficiency potential
v sts by reducing
a taining optimum
fitable
nf
ns for fast operations plexity.
al IT protection for ness security.
h
2
Effic
to boost the cost-effecti
the complexity of purch
performance. Sustainab
production.
ENERGY: UPS and climate cowith a high level of eenergy and costs.
AVAILABILITY: Redundancy, scalabflexibility, thanks to hsolutions cast from tmould.
trol systems ficiency save
ility and olistic e same
eness of your co
sing and operatio
ility is no longer a
SYNERGY: One-stop solutioand minimal com
SECURITY: Optimum physicpermanent busi
mpany. Cut co
n, while main
barrier to pro
ContentsGet more out of it – and overtake your competitors
Rittal, Lampertz and Litcos stand for complete IT competence
ntre. Combine ncy, this mea
ve range of so aximum effic
ost-effective I d permanent
nalysis of IT in provides the
onsistently tra comprehensiv
toring and control, pave the way for a significant optimisation
of efficiency. The aim is to get the maximum possible out of it.
This is not just consistent, it is also intelligent, because it
secures clear competitive advantages in the medium term.
Efficiency
oling
Power
Monitoring
CompleteIT competence
Rittal Data Cen
tre Efficiencyin the data ce
comprehensi
potential for c
availability.
An in-depth a
The results, c
d with efficie
lutions and m
T security an
frastructures
nslated into
ns a
iency
IT
basis.
e moni-
Co
4 Rittal Data Centre Efficiency
unk of efficiency
only effective if you adopt a holistic approach.
ess a whole range of issues, not just one. We
o main electricity consumers – power and
r distribution and IT climate control. These
ntial savings.
High efficiensystems enslosses.
cli
ist ITfree cooling
Optimisation and raising of the cooimplementing aisle containment witechnology
Less power consumpwith optimum energy
Optimised managem
Up to 50 % less pow
+
+
+
=
surable efficiency – UPS systems
inimal investment costs coupled with investment liability due to requirement-oriented, rack-based, odular UPS systems
inimal operating costs with a peak efficiency of 95 % en under partial load and capacitive load. so featuring safe swap, i.e. modules may be swapped th the system operational.
onomic redundancy due to modular scaling
% more efficiency cuts heat loss costs by up to 30 %
to 30 %
vings
3 % light, etc.10 % power distributionand backup
50 % servers
37 % cooling
cies with UPS ure minimal heat
Optimisation of raised-floor cooling offers enormous potential savings with IT climate control.
Measurable efficiency – IT
Utilising cold exterior air to ass+
Up to 50 %
savings
tion by utilising C exploitation
ent with RiZone
er consumption
mate c
chillers
ling tempth integra
RAC
with
ontrol
with
erature by l sensor
systems
IT cooling
Mea
Mrem
MevAlwi
Ec
2
+
+
+
=
Upsa
G
Re
Ri
fo
co
ar
rab yourself a big ch
ducing operating costs is
ttal’s philosophy is to addr
cus in particular on the tw
oling: UPS systems, powe
eas offer the greatest pote
5ntre Efficiency
cienc or intelli t cus
Power and cooling
Servers
Rising energy costs and the growing power consumption (plus increased heat loss) of powerful IT systems causes a significant hike in electricity and operating costs.The escalating operating costs for power and cooling may be significantly reduced with efficient IT infrastructure solutions from Rittal.
Rittal Data Ce
Effi
y f gen tomers6 Rittal Data Centre Efficiency
Th e analysis of the specific potential savings in you
Sa
No 1000 5000No 20 50Ele 4,204,800 kW 19,272,000 kWTocoeff
1,974,174 kW/h 9,049,005 kW/h
Tocoim
983,011 kW/h 4,505,448 kW/h
Sa 118,940 545,227Sa 545 2,500
Efficiency upand CO2 emthis is the fofuture. The scentre is irre
en
n
€
t structures a priority can vary
, Rittal views modularity and flexibility
to boosting efficiency. The RimatriX5
ely adaptable to change. This
ed with cost efficiency, by adapting
manded by the corporate
, (energy) costs issions down – rmula for the ize of the data levant.
Effici
CO2 emissio
Cost
ese are sample calculations. Our specialists will be happy to provide a precisr company. Please call us to arrange an appointment.
mple configurations
. of 1 U rack-mounted servers 10 100
. of blades 0 5ctricity consumption/annum 35,040 kW 525,600 kW
tal heat loss of UPS and power nsumption of cooling without iciency improvements by Rittal
16,365 kW/h 246,881 kW/h
tal heat loss of UPS and power nsumption of cooling with efficiency provements by Rittal
10,992 kW/h 122,911 kW/h
vings in €/annum 645 14,876vings in t CO2/annum 3 68
cy
s
Make cost optimisation a management issue
Companies who make efficient cos
significantly in size. For this reason
as central concepts when it comes
makes your IT infrastructure suprem
means maximum availability coupl
ideally to the current conditions de
environment.
7iciency
Big savin wh r r size:
Current
capacity requirements
Scalablecapacity
adjustment
with RimatriX5
Excess capacity
without RimatriX5
cost-effectiveept from Rittal: se the IT infra-hey currently ments grow, rows as well.
modularity.
Rittal Data Centre Eff
Reliable, flexible,The modular concUsers only purchastructure solution tneed. If the requirethe infrastructure gEfficiency through
gs,
ateve you8 Rittal Data Centre Efficiency
Energy cos rol
Are the energ control of your data centre exploding?
Want more ef ame server computing power, tailored to
yo idua ow, you can achieve this very easily!
Be Rittal L oncepts offer new framework conditions
for infras s of flexibility, reliability and cost-
eff . Rittal ensive cooling solutions cast from
the mould m-based cooling concepts, IT chillers,
fre ng and planning and assembly through to
commissioning everything from a single source. Modular
concepts, tailor our current requirements, and easily
scalab ee
Free coolingthing. It onlyefficient by cconditions fo
Low DensityYour entry into professional IT climate control
Mid DensityThe tailor-made solution for discerning data centres
High DensityThe most powerful solutions for high-end data centres
Prod
uct
Cooling requirements
aisle containment
with aisle containment
LCP Standard/Smart
LCP Plus/LCP T3+
is a wonderful becomes reating the right r optimum use.
Raised floor ocoling and aisle containment give energy costs the cold shoulder.
Bas
CR
LC
ic s
AC s
P Ex
le to m
olution
ystem
tend
s
s
LCP Inline
ts un
y cost
ficienc
l room
ur indivcause
your IT
iciency
same
e cooli
t future need
with
tructures in term
offers compreh
. Rack- and roo
pipework, from
and servicing –
ed precisely to y
s.
der cont
s for climate
y from the s
situation? N
iquid Cooling c
9
l
Rittal Data Centre Efficiency
Totally coo
ete IT competence is synonymous with system ddition to comprehensive advice and planning lexible product spectrum offers tailor-made ll your applications. It goes without saying rehensive solutions also include the complete backed up by reliable, global service.
vel to high-end solutions, gle source:sive product solutions for rack- and room-te control solutions
re such as cold water production, distribution ntd, designed to perfection and installed on
ment
LCP Standard/Plus/Smart
IT chiller
Free cooling
Pipework
Raised floor for cold air supply
3
4
5
6
7
4
3
2
1
3
33
2
4
5
IT cooling
7
Rittal – Complexpertise. In aservices, our fsolutions for athat our compinfrastructure,
From entry-leall from a sin● Comprehen
based clima● Infrastructu
and treatme● Fully planne
request.
10 Rittal Data Centre Efficiency
Rittal aisle contain
CRAC systems
1
2
5
6
the inlet temperature
8°C
100 %
–15 %
85 %15°C
Inlet temperature Energy costs Inlet temperature Energy costs
Coo
ling
out
put
Coo
ling
out
put
on a minimal area
With direct rack cooling with the Rittal Liquid Cooling Package, only the racks are cooled in a sealed system. This cuts investment costs by up to 60 %.
ng package
75 %
50 %
25 %
0 %25 % 38 %13 % 50 % 63 % 75 % 88 % 100 %
Pow
er c
onsu
mpt
ion
On/O
EC m
fan chnoloctricating ac the ennefit oh the cy) is thed, aner con
Room cooling with an average inlet temperature of 8°C.
Because Rittal allows the inlet temperature to be increased to 15°C, energy costs may be reduced by 15 %. A further increase in the inlet temperature is supported.
Direct rack cooling with Rittal LCP
Rack cooling with LCP and increased inlet temperature
100 %
Efficient Efficient fan testands for “elemotor. Alternacontrol acrossOne major becompared wit(AC technologactually requirelectrical pow
11
Volumetric flow
Rittal Data Centre Efficiency
ff operation
odulation
technologygy is achieved with the use of EC motors. EC
l commutated”, referring to activation of the tivation of the motor coil achieves linear speedtire range.
f linear speed control with EC technology onnection of additional coils for speed control at it adapts efficiently to the volumetric flow d combines this with a significantly lower sumption, as illustrated by the diagram below.
Improved efficiency
LCP with high cooli
With conventional room coolingvolume of air must be permane
Liquid c
Conventional room cooling
Conventional room cooling
by raising
ng output
, a very large ntly cooled.
ooli
ligent control with aisle containment
17000 m3/h
22000 m3/h 100 %
50 %
0
5 m3/h
15 m3/h60 % 15 %
36 % with Rittal aisle containment
the volumetric airflow. Reduce the throughput.
n er area.
● Even with low room heights, maximisation of the raised floor height for cooling air supply without flow losses.
● Undisturbed and uniform intake and distribution of cooling air in the cold aisle guarantees a high level of efficiency.
● Favourable working conditions in the cold aisle thanks to minimal temperature, flow and noise load conditions.
● Connected hardware racks outside of the containment system do not impair cooling efficiency.
Rittal aisle containment (cold aisle) without raised floor● Direct connection of the liquid cooling packages
to an external cold water supply.● Simple laying of pipework in the rack base/plinth.● Homogeneous distribution of cooling air in the
cold aisle guarantees a high level of efficiency.● Favourable working conditions in the cold aisle
thanks to minimal temperature, flow and noise load conditions.
● Connected hardware racks outside of the containment system do not impair cooling efficiency.
● Room heights play only a minimal role.
inment
Step 3
By installing temperature and humidity sensors at all key points in the data centre, the entire cooling circuit may be optimised in terms of energy-efficient operation.
12
Energy saving through intel
100 %
50 %
75 %
0
8°C
15°C 100 %
50 %
0
26 %
Step 1 + step 2 + step 3 = Total cost saving
Raise the water inlet temperature.
Reduce
Rittal aisle containment
Rittal aisle containment (cold aisle) with raised floor● Use of standard inexpensive air circulatio
cooling units. Positioning outside the serv
Aisle conta
Step 1 Step 2
Rittal Data Centre Efficiency
ystems
Einsparung
1216
1832
1000 2000kWh/a
savings
a)
otors
1) Load profile with 5500 operating hours p. a.:0.2 % (110 hrs) at 100 % QN (full load)25 % (1375 hrs) at 65 % QN (partial load)40 % (2200 hrs) at 30 % QN (low load)33 % (1815 hrs) in speed-controlled mode
ree cooling
1000
500
0
20000 4000 6000 8000 10000 12000
Pow
er c
onsu
Volumetric flow
Conven
EC mot
rgy has veergy sential
th free cooling
10 2 3 4 5 6
200
0
0 % 20 % 40 % 60 % 80 % 100 %
4
3
2
1
0
% free cooling
€/kW
Year
s
YearsConventional fan
Rittal EC fan
Intelligent control and the consistent use of energy-saving EC fans saves an additional 40 % of energy over a 5-year period.
Depending on the ambient conditions, an invest-ment in free cooling will pay off during the first year. Even if only 30 % of the heat loss is dissipated via free cooling, the plant will be paid off within around two years.
2000
1500
mpt
ion
High eneThe EC motorspeed, the enrange, the pot
Rittal Data Centre Effici
tional motors
ors
savingsry high efficiency at all speeds. At
aving is around 10 %. In the controsavings are significantly higher.
ency
rated lled
Efficiency with
0
1
2
3
Annual electricity coof various heating puin speed-controlled m
Pumps with speed
Pumps with speed
Pumps with consta
1
2
3
Pump
High energy e1200
1000
800
600
400 ther
mal
pipework s
396
nsumption (kWh/mps (DN 30) ode1).
control and EC m
control
nt volumetric flow
ing/f
fficiency wi
-40 %
13
14 Rittal Data Centre Efficiency
ncy at all levels
um system reliability when it comes to developing
lutions for power supply and all aspects of power
ovative Rittal power concepts for energy distribution
commodate all your redundancy, scalability and
ments, coupled with maximum efficiency.
Power Modu– the innovafrom Rittal. Mdecentralisetecture (DPAlevel of avaiapplicationsble, requireminvestments
-
er
nal
trained staff
+ Max. availability
+ High level ofefficiency
– Energy costs
– Manpower
– Administrative input
– Installation costs
– Space requirements
ases
Decreases
lar Concept PMC tive UPS concept odularity and
d parallel archi-) ensure a high
lability for critical , as well as scala-ent-oriented
.
The Power System Module PSM is a fully contact hazardproof busbar with several circuits for a redundant powsupply. Plug-in modules maybe inserted and exchanged whilst the system is operatiofor a time-saving solution.
Greater efficie
Rittal offers maxim
future-oriented so
management. Inn
and protection ac
availability require
+ Scalable
+ Flexible
+ For use by
Incre
15cy
s live
Rittal Data Centre Efficien
Alway
16 Rittal Data Centre Efficiency
1
4
4
5
2
As energy demands escalate, so do the require-
ments placed on the energy supply to racks and
data centres and on the management of power
distribution. The IT power concept from Rittal
combines the requirements of redundancy,
scalability and availability into one system, with
due regard for power distribution and back-up,
with the added benefit of outstanding energy
efficiency.
Modular Power Concept PMC 200
Power Distribution Rack PDR
Power Distribution Module PDM
Power System Module PSM
Power distribution, for fur rmation see Catalogue 32, page 3
1
2
3
4
5
ther info32.3
ace with PMC 200
3232
32
3232
4040
4040
Example 3PMC 200
nfigured according to ncept with five 32 kW
The minimised construction size of the Rittal PMC 200 concept allows three modules plus bat-tery packs or five modules each with up to 40 kW in one Rittal 482.6 mm (19˝) TS 8 UPS rack.
e and modular design.
nding enclosure!
th PMC 200
Energy saving
Example 3
s and minimal pollution:
97
96
95
94
93
92
91
90
95.5
Effi
cien
cy (%
)
9495
17Rittal Data Centre Efficiency
Input voltage Input current
With the PMC 200 rotect the critical load, but also safeguard the operating ratio of the UPS. We will u on the most suitable concept.
Example 1 This 120 kW + 120requires the most oredundancy.
ple 2 variant with three 40 kW ules only requires 1/3 of the ut compared with example 1 dundancy purposes.
Example 3 With five 32 kW modules only 1/4 is required for the buffer output of redundancy, compared with a single redundant 120 kW UPS. However, there is no space left in the rack for battery packs, i.e. an additional battery enclosure is needed. PMC 200 is an e regard to energy and
space requiremen w to future expansion. �
With a power factor of almost 1 near the UPS input – regardless of the load at the UPS output – the dimen-sioning of cable cross-sections and protective devices can be reduced, which in turn helps to lower installa-tion costs. Low current distortions (THDi) mean that system reactions at the supply end are reduced.
25 50 75 100
Loading (%)
The high efficiency of the Rittal PMC 200 ensures a considerable reduction in heat loss dissipation. This in turn leads to a significant reduc-tion in the cost of climate control. Partic-ularly in the lower load range, this high efficiency really comes into its own.
concept, you not only p be happy to advise yo
kW solution utput for
ExamThis modoutpfor re
xcellent solution withts and also with a vie
96
PMC 200
Extremely small installation sp
120120
Example 1 Example 2
In examples 1 and 2 we com-pare the space requirements of two non-modular systems for 120 kW output plus redundancy with the modular UPS system Rittal PMC 200 (example 3),
which is cothe 4 + 1 comodules.
Benefits thanks to minimal construction siz�
Maximum performance density in one free-sta
Maximum energy efficiency wi
Redundancy
Power
Example 1 Example 2
Minimal energy consumption means low cost
Flexible scalability
202020
2020
20
202020
20
Simple expansion while operational Output may be expanded from2 to 3, 4 or 5 UPS modules via“hot swap” with the system opational, without having to switcto bypass mode.
odules or more, an l battery rack will be The autonomy may also ly modified to suit your ents.
l PMC 200 modular sys-bines flexible adapta-stomer-specific require-
ith investment reliability h level of availability.
Extremely short MTTR (Mean Time To Repair)The modules are easily exchanged for others of the same type, so the UPS is fully operational again in just a few minutes. After repairing the defective module, it is simply re-inserted, eliminating the need for expensive on-site repairs.
PMC 20
Super-fast service
35
30
25
40
45
50
– 0.95 1.00 0.95 0.90 0.85 0.80 0.75
kVA
kW
– 0.85cap.
PMC 200: (40 kW)kW
/kV
A
cosphi. ind.– 0.90
Capacitive load Inductive load
Output characteris ious power factors
The blue curve shows the constant power output for various different loads, including inductive and capacitive loads. In this way, minimal power losses are achieved in any situation.
bility may a The Rtion to
iability
anagell time
Flexible scalaThe autonomyrequirements.flexible adaptainvestment rel
With remote mon display at a
18 Rittal Data Centre Efficiency
lso be flexibly modified to suit yourittal PMC 200 modular system com customer-specific requirements w
and a high level of availability.
ment, all the parameters of your UPs.
bines ith
S are
20
er-h
For four madditionaneeded. be flexibrequirem
The Rittatem comtion to cuments wand a hig
0
tics at var
Battery Manager RiBat
ent system for UPS batteries. RiBat can extend of a battery by up to 30 %.
harging for each individual battery.e monitoring per battery.ication of defective batteries.eventive maintenance of batteries.atteries can be restored rather than replaced hing the end of their useful life.tallations may be upgraded.ger replaces the internal SNMP card of the
ery manager RiBat determines all relevant data y voltage, internal resistance, discharge curve, tc. throughout the service life of the monitored
batteries. This data is evaluated and used to control the charging process. RiBat facilitates optimum charging of each individual battery. Battery
TCP/IP
Module
RiBat
Up to 30 % longer
battery life
The managemthe service life
Benefits:● Optimised c● Temperatur● Early identif● Supports pr● Defective b
before reac● Existing ins● RiBat Mana
UPS.
The Rittal battsuch as battertemperature e
19Rittal Data Centre Efficiency
ution Rack PDR and ution Module PDM – r management for IT racksstallation of a power supply in the IT rack shock-hazard protection means significantly mbly costs plus a high level of investment
signith the system operationalt staff required
enclosure and wall-mounted distributor ntral power management for IT racks
B smissline system means that customer-ements may be implemented particularly
quickly and easily. Another advantage of this future-safe system solution is its future extendibility and adaptation to altered usage, without the need for lengthy interruptions to operation. The distributors are supplied fully prewired with customer-specific configuration and testing.
● High performance density in the power distribution rack● May be flexibly modified on site using the ABB smissline
system● Optimised customer-specific solutions
ower Distribution Rack PDR and ower Distribution Module PDMnefits:Accommodation of up to eight PDM systemsSub-distribution up to 250 A per phasePDM may be retrofitted whilst the system is operationalA maximum of 32 racks may be fitted to the sub-distributorFully shock-hazard protectedVDE-certifiedCable connection in the PSM rail for maximum planning flexibility482.6 mm (19˝) modules for power sub-distribution of 40 kW in server and network enclosures4 individually fused, 3-phase outletsConnected load 400 V/3 AC, max. 63 A
PDR flexBenefits:● Time savings with easier planning● Cost reductions thanks to easier assembly● Pre-configured/customised installation supported● Faster, more flexible installation options by simply plugging
in the units● All products in the ABB smissline range may be used (such
as circuit-breakers from 6 A to 32 A and various tripping characteristics)
● Residual-current circuit-breaker, surge voltage protector, motor circuit-breaker etc. additionally available.
Power DistribPower DistribCentral powePlug & play inwith completereduced asseconfidence.
● Modular de● Extendible w● No specialis
IT distributionPDR flex – CeUse of the ABspecific requir
20 Rittal Data Centre Efficiency
PDR/PDM
PPBe●●●●
●●●
●
●●
t r management i SM/PCU system
d m g at individual server levelf ri rgy costs, operators need to be very erf data of their hardware. Active PSM sw and current measurement right down al o slot. This supports targeted data sp ht through to individual equipment ay, ent power consumption of individual erip rdware may be monitored at a
e urrent of the module can be read en in the upper area of the module. slo ay be retrieved online via the m. er limit for the entire module may
also be set. Once this is reached, all LEDs on the active mod-ule switch to red so that no further equipment is connected.
Networking capability of active modules via the CMC-TC systemIn conjunction with the Rittal CMC-TC Processing Unit II, up to 16 active PSM/PCU modules may be managed by TCP/IP via the integral Web interface. Event-controlled linking e.g. of switching states with other CMC-TC sensors (e.g. tem-perature) is also supported.
II
Plug-in modules
TCP/IP
Processing Unit II
P
PSM PSM/PCU system
Green LEDs indicates that power is being supplied to the PSM module, and a low current flow of between 0.1 A and 7 A has been detected on the slot of that module. Other equipment may now be safely connected.
Yellow LEDs indicate an increased current flow of between 7 A and 13 A on the slot. The power consumption of all equipment connected to the module must not exceed 3000 W. Before connecting other equipment, please note its connected load.
Red LEDs indicate that the threshold of 13 A has been exceeded. No further equip-ment must be connected in order to avoid overloading and tripping of the prefuses.
Intelligenwith the RSwitching anDuring times oaware of the pmodules allowto the individulogging and relevel. In this wservers and pglance.Additionally, thfrom a 7-segmThe individualCMC-TC syste
Rittal Data Centre E
powettal Peasurin
sing eneormanceitching utgoingonse rig the currheral ha
overall ct displayt limits m An upp
21fficiency
Plug-in modules
TCP/IP
Processing Unit
SM
system
22 Rittal Data Centre Efficiency
Huge electricity savingsEasy project planningEnhanced protectionFast installation
High cost efficiency
++++
=
Ha
Eff d results plus cost-effectiveness.
It s vided all parts work together with
op al modules.
To ition and operating costs should be
red rocess that Rittal has perfected to
a f s standard with Rittal, and we have
the while the system is running.
RiZ TC system provides an integral solu-
tion um availability in IT environments of
all
The wirelesswithin Rittal straightforwflexible, for creliability.
sensor network CMC-TC – ard, fast and omprehensive
RiZone is a management platform for all components that make up the infrastruc-ture of a data centre, and is easily incorporated into the System Center Operations Manager from Microsoft.
rdware in view
iciency is a combination of intende
ounds easy, and it is, but only pro
timum interaction between individu
this end, the sum total of all acquis
uced to a justifiable minimum. A p
ine art. Energy efficiency comes a
right tools to achieve optimisation
one in conjunction with the CMC-
for optimum reliability and maxim
sizes.
Complete reliability
23Rittal Data Centre Efficiency
itoring system Multi Control concept (CMC-TC) from Rittal rity for all areas of IT. In short, CMC-TC offers ound protection from consequential costs; indi-ty which translates into a high level of availabil- and, above all, flexible. Because of the exten- models, individual monitoring functions may ted and combined. Because it is designed for ularity, the CMC-TC expands to keep pace
pany’s requirements. Benefits include plug & n with patch cables and the automatic detec-. At the same time, the CMC-TC is the central unit for connecting to facility management – re.
less” version, Rittal CMC-TC becomes even easier, faster and more flexible to use. This saves time-consuming cabling work and ensures optimum availability, enhanced productivity, and absolute transparency.
Active Power System Module PSM, Power Control Unit PCU Liquid Cooling Package LCP Video network IP camera Wireless humidity sensorWireless access sensorWireless temperature sensor
1
2
3
4
5
6
Wireless Sensor Network
6
5
3
135
2
2
5
1
3
1
6
46
CMC monThe Computerprovides secucomplete all-rvidual reliabiliity. Preventivesive choice ofbe freely selecmaximum modwith your complay installatiotion of sensorsorganisationaland to the futu
With the “wire
24 Rittal Data Centre Efficiency
oneone is to convert all messages, sensor read-
ators into a plausible event chain. RiZone he isolated approach to IT and building infra-upporting the two protocols commonly used in management – SNMP and BACnet – we forge a n these two separate worlds. Fusing these two s allows us to optimise the availability, reduc-ty and efficiency of a data centre.
nt platform for all components in the data centre e.lly identifies all active RimatriX5 components configuraf redunda
(to TIA 942).● Thanks to the high lev
software solution mayinfrastructure, from ththrough to the data cesures.
● RiZone is capable of cagement system suchManager from Microsover the availability of
● RiZone supports the pconnection of externa
Zo
MON THU FRI SAT SUNKW
Efficiency exampleTo correspond to the power con-sumption of your data centre, the cooling output must be designed for maximum perform-ance in unfavourable ambient temperatures. As this diagram of weekly operation shows, unless properly managed, a typical cooling system is over-dimensioned most of the time. Here, RiZone saves energy by intelligently adapting the cool-ing output to the power con-sumption, airflow and ambient temperature.
The main aim is efficiency: The symbiosis between IT infrastructure and server world Together, Rittal and Microsoft make it much easier for IT administrators to save elec-tricity. Intelligent control circuits optimise energy efficiency and avoid the
on costs of system through autonomous, ti
of all parameters of the physical infra-
tion from Microsoft and Rittal may be e reference variable “server”.
● Any network management systems may be con-nected via SNMP (Simple Network Management Protocol) with a modified MIB (Management Information Base).
Sub-optimum cooling output
Optimum cooling output
Heat load (IT load)
Microsoft● Monitoring of the
status, output and performance of operating systems
● Monitoring of applica-tions, servers and clients
dimension in monitoring, security and resource efficiency in the data centre.
Rittal RiZThe aim of RiZings and actubreaks down tstructure. By sIT and facility bridge betweespecialist areation, complexi
Benefits:● Manageme
infrastructur● Automatica
to allow fast● Monitoring o
25Rittal Data Centre Efficiency
tion.nt data centres up to Tier IV
el of flexibility and availability, a be used to administer physical e single enclosure data centre, right ntre with several hundred enclo-
ommunicating with a server man- as System Center Operations
oft, and exerting a direct influence individual applications.rotocols SNMP and BACnet for the
l devices.
follow-failurespreven
ve action.Rittal● Monitoring
structure.● The informa
linked via th
A brand new
Ri
neTUE WE
D26 Rittal Data Centre Efficiency
g expertise of the Rittal “Complete
mpertz, Litcos) helps to minimise
elerate procedures. Rittal generates
m the harmonious interactions within
Complete IT Competence offers a
esence and international service
lier of complete data centres as well
ction systems. Rittal relies on Litcos
u on the implementation of individual
isations and additions to your data
RittalIT infrastrucPerfect systtions for datworldwide. In RimatriX5rack, power,security anding from a ssource.
Cooling Power Security/monitoring Service
IT security rooms
Rack-based IT infrastructure
Data and network technology
Climate control/refrigeration engineering
Power distribution/back-up
Fire protection and extinguisher systems
ture em solu-a centres
, Rital offers cooling, monitor-ingle
LampertzPhysical IT security One-stop suppliers of security-critical data centre structures. Modular IT security solutions comprisingIT rooms, data centres, IT safes and mainte-nance.
LitcosBusiness continuity management One of the leading com-panies in Europe for the analytical consultancy and holistic planning of data centre structures.
R R
Analyses and consultancy, planning
Site management/execution/general contractor
The comprehensive problem-solvin
IT Competence” experts (Rittal, La
interfaces and complexity, and acc
this value-added for customers fro
its own group of companies. Rittal
worldwide alliance with a global pr
power. Lampertz is a leading supp
as physical data and system prote
for planning and advice.
Rittal – Complete IT Competence
We will also be happy to advise yo
works, such as conversions, optim
centre. Talk to us!
Planning Data centre Room Rack
Security/video/monitoring
Disaster recovery management
Maintenance contracts
Certification
27
Complete IT Comp Team
Consulting and engineering● Site evaluation/risk assessment● Strategic IT advice● System and network analysis● Data centre design● Efficiency analysis and audits● Network planning
In●●
general contractor● Modular IT security rooms● Room technology/raised floor● P● C ineering● R● D● F r systems● A● S
Service● Remote management● Maintenance contracts● Hotline● Automated incident and emergency
management● Relocation management and control● Certification coaching and handling● IT outsourcing, contract reviews
Rittal –the Top
ower distribution/back-uplimate control/refrigeration engack-based IT infrastructureata and network technologyire protection and extinguisheccess protectionecurity/video/monitoring
stallation and commissioningComplete data centresSite management/execution/
etence –
We will be happy to send you further information or advise you in person.
Please send me the following brochure(s):
❑ IT Catalogue
❑ IT News 2009
❑ Catalogue 32
❑ Innovations 2009
❑ System climate control
❑ RiZone (Data Center Management Software)
From:
Surname / first name
Company / customer no.
Department / function
Address
Telephone
Enquiries and information
All in all – solutions from Rittal Rittal has one of the largest ranges of enclosures available for immediate delivery. However, Rittal also supplies integrated solutions – up to Level 4. This comprises mechanical installation, power supply, electronic components, climate control and central monitoring. For all of your requirements. Fully assembled and functional.
Wherever in the world you develop and implement solutions for yourself and your customers, we are close at hand. The global alliance between production, distribution and service guarantees closeness to the customer. Worldwide!
R R
Rittal GmbH & Co. KGPostfach 1662
D-35726 HerbornTel. +49(0)2772 505-0
Fax +49(0)2772 505-2319
e-mail: [email protected]
www.rittal.com
Lampertz GmbH & Co. KGIndustriestraße 24D-56472 HofTel. +49(0)2661 952-0Fax +49(0)2661 952-99e-mail: [email protected]
LITCOS GmbH & Co. KG Daimlerstraße 9 D-57299 BurbachTel. +49(0)2736 41234-00 Fax +49(0)2736 41234-01 e-mail: [email protected]
05/0
9 � E
591
Rittal – Complete IT Competence