right - Hird · top: Hird works on some of the tallest glass skyscrapers, including the iconic...
Transcript of right - Hird · top: Hird works on some of the tallest glass skyscrapers, including the iconic...
2
30
www.hird.co.uk
Email: [email protected]
Throughout this brochure you willsee the Hird Training icon
IPAF 3A - mobile vertical
It is designed to recommend the specificcourses that we feel are necessary tooperate the relevant machine types safelyand effectively.
As ever, if you cannot find the trainingcourse that you require, or are unsure asto which courses suit your requirements,then please do not hesitate to callHird Training on 01482 481965.
Peter Hird & Sons Ltd is one of the UK’s leadingcompanies within the access platform and liftingindustries. We offer a wide range of modern efficientequipment and services to meet with the individualrequirements of each and every customer, small or large.
Throughout this catalogue you will find solutions to all your access, lifting and moving demands.
We have put together a fleet of machines and accessories in direct response to your feedback. Our full range of machines and services are also backed up by a team of highly experienced specialists.
Along with Powered Access, Mini Cranes, Glass HandlingEquipment, Hire and Sales, we also offer a number ofbespoke services such as Contract Lifting, MachineMoving, Service and Maintenance of Equipment and ofcourse we can meet all your health and safetyrequirements through our training arm – Hird Training.
All of our equipment, services and teams of experts areavailable nationwide, through one of our strategicallylocated regional depots covering the north, central andsouthern regions of the UK.
Commitment to Quality: Hird will always adhere toany special request or requirements that you may have,and will fully co-operate with any sensitive areas ormatters that may be occurring within your company at any time.
30
Over 30 Years of Experience
est. 1983
top:Hird works on some of the tallest glass skyscrapers,including the iconic ‘Shard’in London.
right:Our fleet of powered accessmachines is available tocustomers needing to worksafely at height.
top right:We are meeting a growingdemand in modern buildingdesign that incorporateslarge glass panels andcurved sheets.
3
Vacuum Glass Lifters Page 6- 22• MT2 6• MRT2 7• P11104 8• MRT4 9• DSL2 10• PFHL89 Slimline Vacuum 11• MRTA6 12• MR611 14• DSZ2 Curved 16• Kombi 7211-DS2 18• DSZ2 19• Hydraulica 20• Hydraulica 1200 21• Hydraulica 2000 22
Stone Lifters Page 24- 25• SK200 stone vac lifter 24
• SK1000 stone vac lifter 25
Winlet Vacuum Robots Page 26 - 27• Winlet 350 26• Winlet 575 26• Winlet 600 27Glaslift
Glazing Robots Page 28 - 29• Glaslift Geko + MRT4 28• Glaslift Geko PV 28• Glaslift Geko PV+ 28• EMU 29
Counterbalance Floor Cranes Page 30• KS GLASMAX 250 30• KS GLASMAX 500 30• SLK 25 30• Roust-A-Bout R-250 30
Big Foot/Glasboy Page 31• Big Foot 31• Glasboy 330 31• Glasboy 500 31
Material Hoists Page 32
Big Foot/Glasboy Page 31
Glass Trolleys Page 36 - 37
Hand Cups Page 38 - 39
Transport Aids Page 40
Glass Carrying Straps Page 41
Lifting Slings Page 42
Secondary Safety Device Page 43
Glass Vacuums
4
We stock a large range of glass vacuum lifters – vital pieces of equipment that areused in conjunction with mini cranes and spider cranes for glass installation.
Our fleet of glass vacuum lifters includes units such as the versatile MT2, capable of lifting up to135kg with its two suction pads, through to the Hydraulica 2000 – a large vacuum lifter capableof lifting up to 2000kg in weight using 26 suction pads
Our glass vacuum lifters all come with dual-circuits as standard. Some units are remote controlledand a number are able to operate in different configurations.
Before any piece of equipment leaves a Hird depot to go on hire, a rigorous test procedure iscarried out to make sure we supply you with only the very best and safest machine.
As with all of our equipment for hire, the full range of glass vacuum lifters is available across theUK from our regional depots.
www.hird.co.uk
Email: [email protected]
UK CoverageNorthern 01482 227333
Central 01302 341659
Southern 0203 174 0658
RTITB - accredited glass vacuum course
5
Glass Vacuums
The Weight of load is the primaryconsideration when identifying your glass lifting machine.
To calculate the glass weight
Length (m) x Height (m) x Thickness (mm) x 2.5
So if you had a piece of glass that was2070mm x 3500mm and 6mm thick
Weight = 2.070 x 3.500 x 6 x 2.5 = 108.675kg
For the double or triple glazed panels –Simply add the thickness of the panels, ignore theair space. You may however need to consider theweight of the surrounding frame.
Wind conditions can have an impact whencontrolling glass panels with vacuum lifters – especially when suspended below the hook. We recommend that vacuum lifters can be safelyused up to wind speeds of 18mph.
Do not use the glass vacuum lifter in rainyconditions. Water can harm the machine’selectrical system as well as significantly increasethe risk of slipping or falling when in contact withthe machine’s vacuum pads.
We advise that vacuum lifters should only beused between temperatures of 0 and 40degrees centigrade.
Ask the Glass Handling Experts
It is always worth spending a few minutes to remindyourself on the key points of safe glass lifting.
If you have any concerns about load weights or working in bad weatherconditions, then please call the Hird lifting team on 0203 174 0658.
You can measure wind speed with an anemometer, or by using the Beaufort scale below:
www.hird.co.uk
Take a look atour website forthe latest in safelifting informationfrom the team.
0 Calm Air <3 kph Smoke rises straight up
1 Light Air 3 kph Smoke drifts
2 Light breeze 9 kph Wind is felt gently, leaves rustle
3 Gentle Breeze 15 kph Leaves and twigs move, flags flutter
4 Moderate Wind 25 kph Small branches move, paper blows on the street
5 Fresh Wind 35 kph Small trees sway
6 Strong Wind 45 kph Large branches move
7 Near Gale 56 kph Large trees sway
8 Gale 68 kph Difficult to walk
9 Severe Gale 81 kph Small branches break
10 Storm 98 kph Houses damaged, trees blown down
11 Severe Storm 110 kph Serious damage is done
12 Hurricane 118 kph Widespread damage
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
6 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658
135kg
MT2 (135kg) Fixed Dual Circuit Vacuum Lifter
The Wood’s Powr-Grip MT2 is an excellent compact vacuum lifter, providingan alternative to traditional hand cupsreducing manual handling for a wide range of industries.
• Powerful 135kg lifting capacity
• Safer lifting through improved manual handling
• Fewer people required to handle materials boosts productivity
• Suitable for wide range of materials including glass, coated boards, plastics, ceramics and sheet metal.
• Vacuum gauge for each circuit with low vacuum alert
• Manual tilting from vertical to horizontal
Dimensions: HxWxD mm 770mm x 584mm x 244mmVacuum system : dual circuitSuction cup quality: black rubber, not abrasion resistant, heat resistant up to 100˚CNumber of suction cups: 2Suction cup dimension: 280mmLoading capacity of frame: (on smooth and clean surface at 60% vacuum) 135kgWeight of lifter: 24kgStructural depth: 254mmOutput: 1.5m3/hVoltage: pump: 12v DC from rechargeable battery
battery charger: 110v/240v 50/60Hz single phase factory selectable
Technical Specifications
RTITB - accredited glass vacuum course
7Email: [email protected] www.hird.co.uk
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
Glass Vacuums
135kg
MRT2 (135kg) Dual Circuit Vacuum Lifter
Dual circuit vacuum lifter for safer manualhandling and lifting with powered rotation
• 180o degree powered rotation enables operator to manoeuvre loads safely
• Powerful 135kg lifting capacity
• Single person operation
• Can lift a wide range of materials such as glass, plastic and metals
• Safety alarms and interlocks as standard
• Manufactured by Woods Powr grip
Dimensions: HxWxD mm 770mm x 584mm x 244mmVacuum system : dual circuitSuction cup quality: black rubber, not abrasion resistant, heat resistant up to 100˚CNumber of suction cups: 2Suction cup dimension: 280mmLoading capacity of frame: (on smooth and clean surface at 60% vacuum) 135kgWeight of lifter: 24kgStructural depth: 254mmOutput: 1.5m3/hVoltage: pump: 12v DC from rechargeable battery
battery charger: 110v/240v 50/60Hz single phase factory selectable
Technical Specifications
RTITB - accredited glass vacuum course
180o rotation
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
8 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658
320kg
Dimensions: HxWxD mm 1588mm x 1378mm x 233mmVacuum system : dual circuit 1 pump, 2 vacuum tanksSuction cup quality: black rubber, not abrasion resistant, heat resistant up to 100˚CNumber of suction cups: 4Suction cup dimension: 305mmLoading capacity of frame: (on smooth and clean surface at 60% vacuum) 320kgWeight of lifter: 34kgStructural depth: 233mmOutput: 1.5m3/hVoltage: pump: 12v DC from rechargeable battery
battery charger: 110v/240v 50/60Hz single phase factory selectable
Technical Specifications
P11104 (320kg) Dual Circuit Vacuum Lifter
The Wood’s Powr-Grip P11104 ‘4-in-line’ isone of Hird’s most popular lifters. Providingan impressive 320kg lifting capacity, it’s agreat choice when moving sheets of glass,metal, plastic or coated boards.
• Dual circuit vacuum system for powerful lifting
• 4 x 305mm suction cups for secure fitting to material
• Manual tilting – horizontal to vertical
• Low vacuum alert
RTITB - accredited glass vacuum course
180o rotation
9Email: [email protected] www.hird.co.uk
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
320kg
The Woods Powr-Grip MRT4 is another ofHird’s popular vacuum lifters. Offering multipleconfigurations and a ‘short-arm’ option, theMRT4 is a great choice for most load sizes.
• Powerful 320kg lifting capacity
• Variable length extension arms for different materials
• Low vacuum alert
Dimensions: HxWxD mm 1531mm x 1691mm x 292mmVacuum system : dual circuit 1 pump, 2 vacuum tanksSuction cup quality: black rubber, not abrasion resistant, heat resistant up to 100˚CNumber of suction cups: 4Suction cup dimension: 305mmLoading capacity of frame: (on smooth and clean surface at 60% vacuum) 320kgWeight of lifter: 58kgStructural depth: 292mmOutput: 1.5m3/hVoltage: pump: 12v DC from rechargeable battery
battery charger: 110v/240v 50/60Hz single phase factory selectableStandard accessories: 4 x extension arms
Technical Specifications
compact
MRT4 (320kg) Dual Circuit Vacuum Lifter
1691
1230
292
1531
390 930
1990
840
712
1290
RTITB - accredited glass vacuum course
Glass Vacuums
360o rotation
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
10 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658
400kg
Dimensions: HxWxD mm 1300mm x 2100mm x 300mm Vacuum system : dual circuit 4 pumps, 2 vacuum tanksSuction cup quality: black rubber, not abrasion resistant, heat resistant up to 100˚CNumber of suction cups: 16Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 400kgSuction cup dimension: 220mmWeight of lifter: 100kgStructural depth: 300mmOutput: 1.5m3/hVoltage: pump: 12v DC from 2 rechargeable batteries
battery charger: 110v/240v 50/60Hz single phase factory selectableAccessories: cable remote control, wheeled stand
Technical Specifications
DSL2 (400kg) Dual Circuit, Curved - Vacuum Lifter
Hird’s DSL2 is a fully adaptable 16 pad vacuumlifter for convex and concave panels. Suitable forpanels with a minimum radius of 1000mm.• Pads rotate to fix securely to the surface of
the materials
• Great for convex and concave glass as well as other curved panels
• Suitable for panels with a minimum radius of 1000mm
• Low vacuum alert
RTITB - accredited glass vacuum course
270o rotation
11Email: [email protected] www.hird.co.uk
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
Glass Vacuums
445kg
Dimensions: HxWxD mm 1443mm x 1502mm x 188mm Vacuum system : dual circuit 4 pumps, 2 vacuum tanksSuction cup quality: black rubber, not abrasion resistant, heat resistant up to 100˚CSuction cup dimension: 230mmNumber of suction cups: 8Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 455kgWeight of lifter: 54kgStructural depth: 188mmOutput: 1.5m3/hVoltage: pump: 12v DC from 2 rechargeable batteries
battery charger: 110v/240v 50/60Hz single phase factory selectableAccessories: Dual vacuum system (EO10DVS), Vacuum loss warning buzzer (EO3VLW)
Individual pad shutoffs (CM1COWB), 10” lipped vacuum pads
Technical Specifications
PFHL89 Slimline VacuumVacuum Lifter
An excellent mid-range slimline lifter from Hird.Being lightweight and only 188mm deep it isideal for fitting material in narrow work areas.
• 180o rotation, 90o tilt
• On board battery and charger
• Battery energy gauge
• Vacuum gauge
• Vacuum line filter
• Low vacuum warning light
RTITB - accredited glass vacuum course
180o rotation
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
12 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658
500kg
MRTA6 (500kg) Dual Circuit, Quadra-Tilt - Vacuum Lifter
The Woods Powr-Grip MRTA6 featuring Woods‘Quadra-Tilt’ system. The MRTA6 is a very flexibleand popular mid-range vacuum from Hird’s.
• Powerful 500kg capacity from six 305mm suction cups
• Four bar tilt mechanism
• Variable length extension arms for different materials
• Low vacuum alert
Dimensions: HxWxD mm max 1623mm x 2335mm x 290mm min 829mm x 1188mm x 290mmVacuum system : dual circuit 1 pump, 2 vacuum tanksSuction cup quality: black rubber, not abrasion resistant, heat resistant up to 100˚CNumber of suction cups: 6 4 2Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 500kg 336kg 168kgSuction cup dimension: 305mmWeight of lifter: 86kgStructural depth: 290mmOutput: 1.5m3/hVoltage: pump: 12v DC from rechargeable battery
battery charger: 110v/240v 50/60Hz single phase factory selectableAccessories: 4 x extension arms and 2 pads
Technical Specifications
RTITB - accredited glass vacuum course
360o rotation
13Email: [email protected] www.hird.co.uk
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
Glass Vacuums
Suction Pad Configuration
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
14 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658
500kg
Dimensions: HxWxD mm 1498mm (2134mm with extension arms) x 305mm x 193mm Vacuum system : dual circuit 4 pumps, 2 vacuum tanksSuction cup quality: black rubber, not abrasion resistant, heat resistant up to 100˚CNumber of suction cups: 6 4Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 500kg 333kgSuction cup dimension: 305mmWeight of lifter: 71kgStructural depth: 193mmOutput: 1.5m3/hVoltage: pump: 12v DC from 2 rechargeable batteries
battery charger: 110v/240v 50/60Hz single phase factory selectableAccessories: radio remote control, 90˚ tilting option
Technical Specifications
MR611 (500kg) Dual Circuit Vacuum Lifter
The Woods Powr-Grip MR611 updated now to include a tilt function along with 180 degree rotation, this is an excellent addition to Hird’s hire fleet, perfect for longer panel sizes.• Two pads are removable (capacity 333kg) for shorter
glass lengths
• Manual tilting – horizontal to vertical
• Low vacuum alert
RTITB - accredited glass vacuum course
270o rotation
Glass VacuumsP11104 and UNIC 295 Mini Crane
The full range of Hird mini cranesperfectly complements our fleet of glass vacuum lifters.
www.hird.co.uk
Email: [email protected]
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
16 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658
600kg
Dimensions: HxWxD mm Concave 1000mm x 2000mm (2800mm with extension) x 300mm Convex 1600Max (600min) x 2000 (2800mm with extension) x 300mm
Vacuum system : 2 or 4 pumps, 2 vacuum reserve tanksSuction cup quality: black rubber, not abrasion resistant, heat resistant up to 100˚CNumber of suction cups: 24 16Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 600kg 400kgWeight of lifter: 190kg 175kgSuction cup dimension: 220mmStructural depth: 300mmOutput: 1.5m3/hVoltage: pump: 12v DC from 2 rechargeable batteries
battery charger: 110v/240v 50/60Hz single phase factory selectableAccessories: cable remote control, radio remote control
Technical Specifications
DSZ2 Curved 400Kg (16 Pad) & 600kg (24 Pad)Dual Circuit Vacuum Lifter
The DSZ2 Curved Vacuum Lifter range from Hirdoffers a 400Kg or 600Kg capacity.
Fully adjustable, the vacuum lifter swivel arms allow thevacuum pads on the lifting frame to be moulded to thecontours of the load ensuring maximum contact is made,enabling the load to be fully supported throughout the lift.Easily configuring between concave & convex loads, the DSZ2 curved also offers hydraulically assisted tilt making using the vacuum lifter easier to operate.
• Ideal for lifting and handling curved glass panels
• Very powerful dual, independent vacuum circuits
• Lift capacity of up to 600kg
• Low vacuum alert
RTITB - accredited glass vacuum course
360o continuous rotation
17Email: [email protected] www.hird.co.uk
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
Glass Vacuums
Concave
Convex
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
18 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658
600kg
Kombi 7211-DS2 (600kg) Dual Circuit Vacuum Lifter
Hird’s Kombi is a very popular choice withcontractors. With its robust design and lockable tilt, the Kombi is a tough mid-range vacuum.• Lockable tilting – from vertical to horizontal at
15o intervals
• Powerful dual independent vacuum circuits
• Low vacuum alert
Dimensions: HxWxD mm 1300mm x 1300mm (2840mm with extension) x 255mm Vacuum system : dual circuit 1 pump, 2 vacuum tanksSuction cup quality: black rubber, not abrasion resistant, heat resistant up to 100˚CNumber of suction cups: 12 (14 with extension arms)Suction cup dimension: 300mmLoading capacity of frame: (on smooth and clean surface at 60% vacuum) 600kgWeight of lifter: 112kgStructural depth: 255mmOutput: 1.5m3/hVoltage: pump: 12v DC from rechargeable battery
battery charger: 110v/240v 50/60Hz single phase factory selectableAccessories: 2 x extension arms with moveable pads
Technical Specifications
extension arms
RTITB - accredited glass vacuum course
360o continuous rotation
19Email: [email protected] www.hird.co.uk
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
Glass Vacuums
750kg
Dimensions: HxWxD mm 1240mm x 1300mm (2180mm with extension) x 180mm Vacuum system : dual circuit 2 pumps, 2 vacuum tanksSuction cup quality: black rubber, not abrasion resistant, heat resistant up to 100˚CNumber of suction cups: 10 6Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 750kg 450kgSuction cup dimension: 330mmWeight of lifter: 75kgStructural depth: 180mmOutput: 1.5m3/hVoltage: pump: 12v DC from 2 rechargeable batteries
battery charger: 110v/240v 50/60Hz single phase factory selectableAccessories: 4 x extension arms with pads, wheeled stand
Technical Specifications
DSZ2 (750kg) Dual Circuit, Slimline - Vacuum Lifter
Hird’s DSZ2 is the UK’s slimmest vacuum liftercurrently available today. Weighing only 75kgand capable of lifting 750kg (with extensionarms fitted) a strong performer.
• Narrow depth of just 180mm for tight working environments
• Impressive 750kg lifting capacity (10 suction cups)
• Wheeled stand
• Low vacuum alert
4 x extension arms with pads Wheeled stand
RTITB - accredited glass vacuum course
360o continuous rotation
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
20 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658
1000kg
Hydraulica 1000 (1000kg) Dual Circuit Vacuum Lifter
The Kappel Hydraulica 1000 features an impressivelifting capacity (up to 1000kg), and includes aremote control power tilter for larger loads.
• Extension arms and ten pad panel provide flexible lifting
• Powered tilting improves material handling
• Wheeled stand
• Low vacuum alert
Dimensions: HxWxD mm 1230mm x 1350mm (2900mm with extension) x 300mm Vacuum system : dual circuit 4 pumps, 2 vacuum tanksSuction cup quality: black rubber, not abrasion resistant, heat resistant up to 100˚CSuction cup dimension: 330mmNumber of suction cups: 14 10Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 1000kg 750kgWeight of lifter: 150kg 120kgStructural depth: 300mm 300mmOutput: 1.5m3/hVoltage: pump: 12v DC from 2 rechargeable batteries
battery charger: 110v/240v 50/60Hz single phase factory selectableAccessories: 2 x extension arms with pads, cable remote control, wheeled stand
Technical Specifications
RTITB - accredited glass vacuum course
360o continuous rotation
21Email: [email protected] www.hird.co.uk
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
Glass Vacuums
1200kg
Dimensions: HxWxD mm 1450mm x 2070mm (3600mm with extension) x 300mm Vacuum system : dual circuit 4 pumps, 2 vacuum tanksSuction cup quality: black rubber, not abrasion resistant, heat resistant up to 100˚CSuction cup dimension: 330mmNumber of suction cups: 16 10 8Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 1200kg 750kg 600kgWeight of lifter: 220kg 156kg 150kgStructural depth: 300mm 300mm 300mmOutput: 1.5m3/hVoltage: pump: 12v DC from 2 rechargeable batteries
battery charger: 110v/240v 50/60Hz single phase factory selectableAccessories: cable remote control, wheeled stand, 2 x extension arms with pads
(increasing capacity from 750kg to 1200kg)
Technical Specifications
Hydraulica 1200 (1200kg) Dual Circuit Vacuum Lifter
The Hydraulica 1200 is a powerful vacuum lifter in the Hird fleet designed to lift large, heavy andeven irregular loads of up to 1200kg.
• Irregular loads can be lifted with the assistance of individual suction pad shut off
• Very powerful dual, independent vacuum circuits
• Powered tilting improves material handling
• Wheeled stand
• Low vacuum alert
RTITB - accredited glass vacuum course
270o rotation
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
22 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658
2000kg
Hydraulica 2000 (2000kg) Dual Circuit Vacuum Lifter
The high capacity Hydraulica 2000 is one of the most powerful vacuum lifters availablein the UK today.
Updated with a new frame design with 8 removable extensions arms, it makes it easy to reconfigure toaccommodate different load shapes.
With a cable remote offering the user powered 210 degreerotation & 90 degree tilt for precision installation.
• Extension arms and ten pad panel provide flexible lifting
• Powered tilting improves material handling
• Wheeled stand
• Low vacuum alert
Dimensions: HxWxD mm 1870mm x 2600mm (5000mm with extension) x 380mm Vacuum system : 4 to 6 pumps, 2 vacuum tanksSuction cup quality: black rubber, not abrasion resistant, heat resistant up to 100˚CSuction cup dimension: 330mmNumber of suction cups: 26 14Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 2000kg 1050kgWeight of lifter: 750kg 500kgStructural depth: 380mm 380mmOutput: 1.5m3/hVoltage: pump: 12v DC from rechargeable battery
battery charger: 110v/240v 50/60Hz single phase factory selectableAccessories: cable remote control, wheeled stand, 2 x extension arms with pads
(increasing capacity from 1050kg to 2000kg)
Technical Specifications
RTITB - accredited glass vacuum course
210o rotation
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658
300kg
SK200 (300kg) Side and Top Lifter Stone Vac
Let Hird’s Stone Vac SK200 do the hardwork when lifting stone materials orconstruction panels such as drywall or plasterboard.
• Powerful lifting from footprint of just 300mm x 500mm
• Horizonal lifting capacity of 300kg, 200kg for vertical
• Also suitable for polished stone materials
• Low vacuum alert
Dimensions: HxWxD mm 250mm x 492mm x 260mmVacuum system : single circuitNumber of suction pads: 1Suction cup dimension: 280mmLoading capacity of frame: (on smooth and clean surface at 60% vacuum) 300kg for top lifting 200kg for side liftingWeight of lifter: 32kg Structural depth: 260mmOutput: 1.5m3/hVoltage: pump: 12v DC from rechargeable battery
battery charger: 240v
Technical Specifications
RTITB - accredited vacuum course
24
Stone Lifters
Email: [email protected] www.hird.co.uk
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
RTITB - accredited glass vacuum course
1000kg
SK1000 (1000kg) Side and Top Lifter Stone Vac
Hird’s powerful Stone Vac SK1000 for liftingstone, kerbs, paving, blocks, bricks, slabs and pipes up to 1000kg.
• Side lift arm aids lifting
• Range of spreader beams available
• Low vacuum and overlowed alerts
• Also suitable for polished stone materials
Dimensions: HxWxD mm 619mm x 590mm x 107mmVacuum system : single circuitNumber of suction pads: 1Suction pad dimension: 450mm x 900mmLoading capacity of frame: (on smooth and clean surface at 60% vacuum) 1000kg for top lifting Weight of lifter: 44kgStructural depth: 107mmOutput: 1.5m3/hVoltage: pump: 12v DC from rechargeable battery
battery charger: 240v
Technical Specifications
SK1000 in sidelift mode SK1000 with 1ton suction pad
Stone Lifters
25
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
26 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658
350kg 575kgThe Winlet 350 robot revolutionises the installation of glass, with capacities of up to 350kg and overheadinstallation all within a compact design for work inconfined areas.
In addition to our range of glass vacuumlifting equipment, we can offer our glazingcustomers throughout the UK a fleet of vacuum robots from leadingmanufacturer Winlet.
Winlet Vacuum RobotsDual Circuit Window & Glass Installation Robots
Winlet Vacuum Robots
All machines in the Winlet series can fit through a standard doorwayand are battery powered, therefore ideal for interior use.
The Hird range of vacuum robots has lifting capacities from 175kg up to 600kg.
Used in conjunction with other pieces of glass handling equipment,vacuum robots have been designed to comply with manual handlingregulations specifically related to handling composite and unitised windows.
Winlet 350
Technical Specifications Winlet 350 Winlet 575
Max capacity 350kg 575kg Max capacity on side 200kg 275kg Total weight excl. counterweights 390kg 1025kgTotal weight incl. counterweights 495kg 1300kgExternal width 690mm 890mmExternal length 1450mm 1880mmExternal height 1270mm 1600mmMin/max extension (front bumper to suction cup) 290/790mm 700/1800mm Max lifting height (to centre of lifting yoke) 2800mm 3600mm Hydraulic side offset 100mm 100mmFine lift on arm 500mm 200mmTilt function 140˚ 180˚Hydraulic rotation 360˚ 180˚Suction cups 4 x Ø 270mm 4 x Ø 350mmBattery 2 x 75 AH 2 x 150 AH
Winlet 350
Winlet 575
The new Winlet 575 model combines superior liftingcapacity and reach without compromising it’s compactdesign. With a 575kg capacity the unit replaces theneed for traditional lifting methods.
690mm
1270
1 0
2
1
1 0
3m
200kg
2
1
1 0
3m
200kg
250kg
300kg
350kg
Winlet 575
2 1 0
2
3
4m
1
325kg450kg
2 1 0
2
3
4m
1
450kg
550kg
200kg325kg
1450
1270
1175290
700 1370 275
1600
1800
890
UK and IrelandDistributor
27Email: [email protected] www.hird.co.uk
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
Vacuum Robots
Technical Specifications Winlet 600
Max capacity 600kg Max capacity on side 300kg Total weight excl. counterweights 865kgTotal weight incl. counterweights 1060kgExternal width 875mmExternal length 1315mmExternal height 1550mmMin/max extension (front bumper to suction cup) 600/1300mm Max lifting height (to centre of lifting yoke) 2800mm Hydraulic side offset 90mmFine lift on arm 90mmTilt function 160˚Continuous rotation 360˚Suction cups 4 x Ø 385mmBattery 2 x 95 AH
Winlet 600
1315 mm520 mm
1580 mm
875 mm
360
0 mm
MM
2
1
1 0
3 metre
300kg
550kg600kg
70º
2
1
1 0
3 metre
425kg
600kg
300kg
600kg
The new Winlet 600 model combines superior lifting capacity and reachwithout compromising it’s compact design. Operators will be able to workmore efficently, resulting in fewer injuries and safer installation.
Winlet 600
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
28 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658
250kg 175kg250kg
Geko+MRT4 glazing robot with adetachable vacuum system.
Geko PV+ glazing robot with horizontalpick-up & rotation through 180° foroverhead installation.
Geko PV glazing robot is idealmachine for handling compositeand unitised windows.
Glaslift Geko+MRT4 Glaslift Geko PV+
Technical Specifications Geko+MRT4 Geko PV Geko PV+
Max capacity 250kg 250kg 175kg
Weight 467kg 460kg 500kg
Min outside wheel width 618mm 618mm 618mm
Max outside wheel width 820mm 820mm 820mm
Travelling length 1970mm 2070mm 3100mm
Max height 2655mm 2460mm 3000mm
Travelling height 1265mm 1265mm 1265mm
Tyre pressure - front / Rear 4.5 / 7.5 bar 4.5 / 7.5bar 4.5 / 7.5 bar
Battery 12v DC 12v DC 12v DC
Battery charger 110v 110v 110v
Battery recharge time (approx) 8 hours 8 hours 8 hours
Hydraulic horizontal arm capacity n/a option 175kg
Glaslift+MRT4 ‘2-in-1’ PV PV+
820
Wheels in the working configuration
618
Wheels in narrow access configuration
3100
1265
Glaslift Geko PV
Glasslift Glazing Robots
• Lifting capacity up to 500kg
• Fits through standard dorrways
• Battery power for quiet, emission free operation
Used in conjunction with other pieces of glass handling equipment,glazing robots have been designed to comply with manual handlingregulations specifically related to handling composite and unitised windows.
1850
2395
with
out e
xten
sion
arm
s26
55 w
ith e
xten
sion
arm
s
1970
1265
1880
2460
2070
1265
1880
3000
180˚ Tilting
Glasslift Glazing Robots
29Email: [email protected] www.hird.co.uk
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
0
1
2
3
4
5
6
A B C
0 1 2 3 4 50
1
2
3
4
5
65760mm reach*4900mm reach*
A B C
0 1 2 3 4 5
EMU Technical Specifications
Vacuum system dual circuit: 1 pump, 2 vacuum tanksSuitable for lifting material properties: gastight
surface: smoothexample: glass, plastic boards, ceramic plates, sheet metals, coated board
porous materials are possible but must be subjected to testingCapacity jibs 1 & 2: 500kg
jibs 3: 300kgLength folded: 2380mmWidth folded: 1250mmHeight folded: 1830mmWeight counterweights fitted: 1650kg (1450kg without counterweights)
(on smooth & clean surface at 60% vacuum)
Vacuum RobotsEMU (500kg)
2380
2300
1250
1410
• Maximum reach of 5.76m from floor to pad face
• Lifting capacity of up to 500kg (see technical specs)
• Battery power, no fumes
• Unique head allows a unit to be manipulated through:
• 80° left and right of centre• 80° up and down from centre• 360° continuous rotation
2900
1920
A
500kg
A = Jib 1 500kgB = Jib 2 500kgC = Jib 3 300kg
From floor level to centre of frame with full extension, fullangle and frame vertical
*
A B C
EMU - Glass Lifting Robot
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
30 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658
Counterbalance floor cranes are idealfor a large number of glass handlingrequirements and give the operatorcomplete 360 degree freedom of movement.
Our range of counterbalance floor cranes is made up ofGlasboy and Glasmax models, and can handle loads of up to 500kg.
All models are used in conjunction with a glass vacuum lifter,with some suitable for vertical glazing, whilst all are suitable for ground level glazing.
Capacity 250kg 500kg 300kg 680kgHook height 7.5m 4.8m 7.9m 7.6mWidth 800mm 800mm 800mm 1500mmLength 1920mm 1920mm 2220mm 1500mmWeight: dead weight - lift only 125kg 205kg 204kg 170kg
inc counterweights 225kg 405kg 332kg NA
Technical Specifications Glasmax 250 Glasmax 500 SLK 25 R-250
CounterbalanceFloor Cranes
Glasmax
500kg 680kg300kg
Multi-function lightweight manual hoist
• Easily transportable by van
• Simple to assemble for use
• Used extensively with vacuum lifters for glazing
• Powered 240v winch option available
Versatile lift with infinite load height adjustment
• Tee-Head Extension Bar, lift wider loads up to 455kg
• Lift and place loads in tightlocations impossible for other lifts
• Moves vertically and horizontally
• 2 Winches: operate load and mastelevation separately
Counterbalance hoist withcounterbalance weights
• Heavy load steel platform
• Swivel casters
• Flexible lightweight hoist
• Dismantles to fit inside a van
• Removable counterweights for ease of transport
• Can be fitted with a glass vacuum lifter or winch
Roust-A-BoutSLK 25
31Email: [email protected] www.hird.co.uk
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
Floor Cranes
Counterbalance floor cranes with hydraulic lifting arm.• Max lifting capacity 280kg, 330kg or 500kg
• Max hook height 2.76m
• Perfect for office, showroom and shop front glazing, fitting below architectural features when used in conjunction with a vacuum lifter
• Ideal for lifting loads from below when fitted with an electric hoist
• Can be quickly and easily assembled and disassembled for transport
• Lockable wheels
Big Foot Glasboy
Big Foot, Glasboy (up to 500kg) Counterbalance Floor Cranes
Max capacity pos 1 280kg 330kg 500kg Max capacity pos 2 250kg 300kg 420kg Max capacity pos 3 220kg 270kg 370kg Max capacity pos 4 190kg 250kg 300kg Weight: dead weight - lift only 115kg 118kg 130kg
inc counterweights at 24kg 264kg 406kg 706kg Counterweights No. 6 12 24Max hook height 2760mm 2760mm 2760mm
Technical Specifications Big Foot Glasboy 330 Glasboy 500
500kg
Glasboy 330
Glasboy 500
Big Foot
Manual handling awareness
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
32 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658
The Hird range of material hoistsoffers portable lifting options allowingyou to safely lift heavy loads aroundsites.
With both manual and automatic options, material hoists can carryloads of up to 1000kgs in weight.
Material hoists are often paired with glass vacuum lifters and usedfor applications such as ground level shop front glass installation.
We offer competitive rates on short term hire and long term hire onour full range of material hoists.
Material Hoists
Capacity 500kgNumber of falls 1Rope length VariousHoist weight 33kgPower source 110vRemote control length 2.5m
Wire rope lengths available:30m, 60m, 120m
Capacity 1000kgNumber of falls 1Chain length VariousHoist weight 12kgPower source ManualRemote control length -
Chain lengths available:6m, 9m, 12m
Capacity 1000kgNumber of falls 1Chain length VariousHoist weight 40kgPower source (Voltage @ 60 Hz 460) ElectricRemote control length 4.5m
Chain lengths available:6m, 30m
0.5t - Electric Hoist 1t - Manual Chain Hoist 1t - Electric Chain Hoist
500kg 1000kg1000kg
0.5t Portable motorised wire rope hoist - Minifor TR50
• 2.5m remote cable as standard(additional lengths available)
• Emergency stop function
• Low weight
• Quick installation
• Long wire rope length
• Easy to use, light-weight, robust, powerful
1t Electric chain hoist - Lodestar
• 3-Step infinitely variable speed control
• 4.5m remote cable as standard
• Lift Speed 0-16 FPM
• Electric disc & regenerative brake
• H4 service classification
• Complies with ASME/ANSI B30.16, B-10 - Standards
1t Manual chain hoist - TRALIFT
• Robust design
• Swivel hook with safety catch
• Hook with overload indicator
• Automatic brake, double pawls
• Heavy duty bearings
• The chain length can be adjusted in the neutral position
• Load limiter
Block and Tackle
33Email: [email protected] www.hird.co.uk
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
Fall Arrest Inertia Reel Block 2t - Adjustable Trolley Clamp
• 12m long and just 4.9kg• Maximum rated load – 140kg• 4mm galvanised wire rope• Easy to carry and install
• Adjustable from 76mm to 203mm• Easily adjustable to fit most beams by
turning central threaded adjusting bar• Locking lever secures the adjustment• Weight 15kg
Fall Arrest Block - Beam Trolley Clamp
3000kg3t professional leverhoist
• 1.5m of loadchain
• Easy to operate
• Wide opening swivel hooks with latch
• Comfortable rubberised handle
• Longer chains available
• Weight 21kg
Adjustable Beam Clamp Adjustable Beam Trolley
• Portable adjustable steel anchor device.• For use on horizontal steel beams.• Size of profile:from 65mm to 120mm• Weight 4kg
• Portable adjustable steel anchor device.• For Use on horizontal steel beams.• Size of profile: from 65mm to 120mm• Weight 5.2kg• EN 795 Class B
Anchors
Lifting accessories
Portable Roof Man Anchors
• Ideal for Fall Protection / Restraint when working on flat roofs where there is no suitable anchor point
• Suitable for one person only
• 12 weights Included, 18.5kg each
• Special rubber base for extra grip
• Chassis made from fire zincgalvanised steel
Portable Man Anchors
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
34 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658
Gantry, Forklift Attachment and Transport Trucks
500kg - 5000kg 1500kg
Unique portable gantry system that can safely liftto 5000kg, with manual assembly on just 4 bolts
• 4 portable parts on just 4 bolts
• Available as 4 portable systems S, M, I and T with max lifting capacities of 500kg to 5000kg
• 360° swivel-locking castors as standard for easy positioning, all terrain castors & uneven ground options available
• Simple, manual height & span adjustment
• Ultra-safe, captive trolley
• CE & EN 795 Class B approved by Notified Body
• Weight 92kg - 294kg
Full details upon request
The angled beam is extendable to enable access in difficult to reach areas, for use withforklifts or telehandlers
• Extendable angled beam provides access in difficult-to-reach areas
• Max capacity jib 1-1500kg,jib 2-1000kg
• Easily secured to forks
• Carry handle
• Lifting bail will suspend vacuum lifter or other equipment
• Weight 55kg
Angled Fork Lift AttachmentPorta-Gantry 5000
• SWL 1000Kg
• Dimensions: 1500mm x 750mm
• Solid steel construction with heavy duty wooden bed.
• Solid tyres
4-Wheel Turntable Truck
1000kg
• Capacity 2000kg
• Forks dimensions - 550mm wide x 1100mm long
• 3 position control handle
• Weight 78kg
Pallet Truck
2000kg
35Email: [email protected] www.hird.co.uk
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
Accessories
Timber Billets and Outrigger Mats
Capacity spreads load pointTimber size to suit application
Capacity spreads load pointMat size to suit application
Timber Billets/Sleepers Outrigger (Crane) Mats
Point loadings
Timber Billets / Sleepers, for placement under acrane’s outrigger feet, they spread the load tocreate a more stable lifting base.
• Made from high quality timber for durability
• Spread load to create more stable lift base
• Helps reduce floor loadings
• Various sizes available depending on floor loading
We also stock timber (bog) mats
Outrigger (Crane) Mats, for placement under acrane’s outrigger feet, these mats spread the load toreduce floor loading.
• Made from high resistance polyethylene for durability
• Spread load to create more stable lift base
• Helps reduce floor loadings
• Various sizes available depending on floor loading
If you have any doubts at all about floor loading, or to specify the correct machinefor your project, then please call the Hird lifting team on 0203 174 0658.
Point loadings
Hird provides its customers with a range of timber billets and outrigger mats to use inconjunction with any crane that requires outriggers.
Statistics show that at least 50% of accidents involving cranes occur becauseoutriggers have not been set up correctly.
The Hird range of billets and mats are essential accessories to spread loads, reduce floor loading and ensure a more stable lifting base.
Cranes with outriggersprovide a solid platformfor the crane’s safeoperation and efficient use.
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
36 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658
Our range of trolleys (sometimesreferred to as stillages) is designed totransport sheets of glass and othermaterials weighing up to 1500kg.
A-frame trolleys, plate glass trolleys and slab buggies are used particularlyin conjunction with our range of glass handling equipment, such as vacuumglass lifters and glazing robots.
The trolleys enable workers to move loads safely and quickly, by hand,whilst preventing materials from slipping.
Glass Trolleys
Capacity 1000kgTrolley size L1600 x W850 x H1600mm
Capacity 1000kgTrolley size L2000 x W1410 x H1900mm
Small A-frame Large A-frame
Glazing Accessories
• Capacity 700kg
• 40mm max sheet thickness
• Fully adjustable for sizes between 2500mm – 4000mm
• Support rods available for loads up to 6000mm
• Designed for transporting large insulating panes or shop windows
• Collapsible for easy transportation
• Steering from both ends
Plate GlassTrolley
1000kg1000kg
700kg
Manual handling awareness
37Email: [email protected] www.hird.co.uk
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
Accessories
A-frame trolleys feature• Capacity up to 1500kg
• 4 wheeled A-frame stillage
• Swivel casters including locking brakes
• Easy movement via steering castor
• Wooden lined to protect material and prevent material from slipping
• Lifting eyes *Large certificated
• Forklift points (certified) *Large certificated
1500kg 1500kg
Capacity 1500kgTrolley size L2300 x W1200 x H1850mm
Capacity 1500kgTrolley size L2000 x W1460 x H3000mm
Liftable A-frame certificated High sided A-frame
• Capacity 400kg
• 280mm max slab thickness
• Max slab size: 1360mm high, 1300mm long Slab
• Wooden lined to protect material and prevent material from slipping
• Designed for stability but compact enough to fit inside a small van
• Easy movement via steering castors, include locking brakes
• Pneumatic rear tyres
Slab Buggy
400kg
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
38 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658
Hand CupsGlass Lifting Accessories
Glass lifting accessories can makea big difference in making surethat a job can be carried outquickly and effectively.
Hird can supply a number of useful accessories. These include webbingstraps and slings, bow shackles, corner protection blocks, shrouds, pump-activated suction lifters and lever-activated suction lifters.
All of our glass lifting accessories are ideally suited for use with the Hird range of glass lifting and glass handling equipment.
Pump-activated hand grips Bohle VERIBOR blue line
PH3001 - Pump-activated suction lifterwith pressure gauge
PH3002 - Plastic suction lifter withpriming pump
PH3003 - Aluminium suction lifter withpriming pump
Suction pad 210 mm ØNumber of suction pads 1Load capacity 120 kgLifting direction parallelWeight 1.92 kg
Suction pad 210 mm ØNumber of suction pads 1Load capacity 120 kgLifting direction parallelWeight 1.375 kg
Suction pad 210 mm ØNumber of suction pads 1Load capacity 120 kgLifting direction parallelWeight 1.545 kg
120kg 120kg120kg
PH3004 - Aluminium suction lifter withpriming pump
PH3005 - Aluminium suction lifter withpriming pump
PH3006 - Aluminium suction lifter withpriming pump
Suction pad 210 mm ØNumber of suction pads 1Load capacity 110 kgLifting direction parallelWeight 1.536 kg
Suction pad 220 mm ØNumber of suction pads 1Load capacity 80 kgLifting direction verticalWeight 1.54 kg
Suction pad 80 x 380 mmNumber of suction pads 1Load capacity 120 kgLifting direction verticalWeight 1.625 kg
110kg 120kg80kg
39Email: [email protected] www.hird.co.uk
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
PH3010 - Suction lifter with manual pump
PH3011 - Oval suction lifter withmanual pump
PH3012 - Suction lifter
Suction pad 150 mm ØNumber of suction pads 1Load capacity 50 kgLifting direction parallelWeight 0.5 kg
Suction pad 150 x 75 mmNumber of suction pads 1Load capacity 30 kgLifting direction verticalWeight 0.405 kg
Suction pad 120 mm ØNumber of suction pads 1Load capacity 15 kgLifting direction verticalWeight 0.405 kg
50kg 15kg30kg
Glass lifting accessories
PH3013 - Suction Positioning Device
Suction pad Adaptor 20, 26 & 32 mm ØNumber of suction pads 1Load capacity -Lifting direction verticalWeight 0.0646 kg
PH3007 - Plastic pump-activatedsuction lifter for curved surfaces
PH3008 - Metal pump-activatedsuction lifter for curved surfaces
PH3009 - Metal pump-activatedsuction lifter for curved surfaces
Suction pad 200 mm ØNumber of suction pads 1Load capacity 57 kgLifting direction parallelWeight 1.5 kg
Suction pad 200 mm ØNumber of suction pads 1Load capacity 57 kgLifting direction parallelWeight 1.9 kg
Suction pad 254 mm ØNumber of suction pads 1Load capacity 79 kgLifting direction parallelWeight 2.308 kg
57kg 79kg57kg
Pump-activated suction lifters Wood’s Powr-Grip
Call the Hird Glazing Team on 0203 174 0658
Manual handling awareness
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
40 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658
Transport AidsGlass Lifting Accessories
Glass Transporting Pliersavailable in three configurations
PH3014 - For material 4 - 20mm thick
Load capacity 1000 kgMaterial thickness 4 - 20 mmWeight 43.58 kg
1000kg
PH3016 - For material 3 - 20mm thick
Load capacity 600 kgMaterial thickness 3 - 20 mmWeight 34.46 kg
PH3015 - For material 15 - 38mm thick
Load capacity 1000 kgMaterial thickness 15 - 38 mmWeight 28 kg
600kg1000kg
Clamping Carriage Self-Clamping
PH3017 - Clamping Carriage
Tryes Air filledLength 30 cmWidth 30 cmHeight 30 cmWeight 7.72 kg
• Air tyres for quiet transport • Materials up to 100mm width
and 200kg weight• Inner felt linings • 2 spacing inserts 250x70x30mm
for thin material
• Robust transporting pliers• Handling all kinds of sheet material• Easy to use for single sheet handling • Hoisting tool, simply lift the glass transporting pliers
above the object to be transported.
Glass Carrying Devices
• Suitable for transporting sheet material
• Load is held firmly between two non-slip, rubber-lined clamps
• The heavier the load, the stronger the clamping action
PH3019 - Tragboy
Opening range up to 25 mmLoad capacity per pair 80 kgWeight 2.2 kg
PH3018 - Tragkuli
Opening range up to 40 mmLoad capacity per pair 160 kgWeight 5.24 kg
• Suitable for transporting all kinds of materials
• The load is held firmly between two non-slip, rubber-lined clamps
• The heavier the load, the greater the clamping pressure
41Email: [email protected] www.hird.co.uk
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
Wooden Glass Corner Holder
PH3026 - Material up to 60mm
Suction pad 120 mm ØPanel thickness max. 60 mmWeight 0.7 kg
PH3025 - Material up to 30mm
Suction pad 120 mm ØPanel thickness max. 30 mmWeight 0.5654 kg
Protective corner holder for use when transporting sheet material, wide version
• 120 mm suction cup - built-in • Suitable for all materials with smooth,
flat, airtight surfaces
Examples • glass • plastic • metal • coated wood • marble
Glass lifting accessories
• Heavy-duty linen carrying strap
• Hand slings included• Leather chafe protection• Cross strap prevents
glass sheet sliding out
Glass Carrying Straps
• Heavy-duty linen carrying strap
• Leather chafe protection • Adjustable length• 40mm and 80mm widths
• Heavy-duty linen carrying strap
• Leather chafe protection • Adjustable length
• Leather carrying strap • Shaped wooden
handles• Chafe protection
from felt lining
Glass Lifting Accessories
Safety Strap Adjustable Strap Cross Strap Leather Strap
Hemp Strap
PH3024 - Hemp strap
Width 40 mmLengths VariousWeight 0.057 kg
PH3020 - Safety strap
Length 1650 mmWidth 80 mmWeight 0.295 kg
PH3021 - Adjustable strap
Length 1650 mmWidth 40 mm / 80 mmWeight 0.1426 kg / 0.24 kg
PH3022 - Cross strap
Length 5200 mmWidth 80 mmWeight 0.704 kg
PH3023 - Leather strap
Length 1100 mmWidth 70 mmWeight 0.58 kg
Glass LiftingStrap
PH3400 - Glass lifting strap
Lifting Capacity 1tLengths 1mMaterial Polyester
Certified under BS EN 1492-2:2000Exclusive to Hird
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
42 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658
Lifting SlingsLifting Accessories
Duplex polyester webbing sling Round sling (Endless sling)
1 tonPH3121 1m x 1t PH3122 2m x 1tPH3123 2m x 1t 2 tonPH3221 1m x 2tPH3222 2m x 2t PH3223 3m x 2t 3 tonPH3321 1m x 3tPH3322 2m x 3t PH3323 3m x 3t
1 tonPH3131 1m x 1t PH3132 2m x 1t PH3133 3m x 1t 2 tonPH3231 1m x 2t PH3232 2m x 2t PH3233 2m x 2t 3 tonPH3331 1m x 3t PH3332 2m x 3t PH3333 2m x 3t
Duplex Polyester Webbing Sling Round Sling (Endless sling)
• Extra strength 2 ply lifting sling
• Durable and twist/kink resistant
• Lengths of 1m, 2m and 3m for 1, 2 and 3 ton
• 7:1 Safety factor
• Colour coded in accordance with EN14921-1
• Duplex lifting sling
• Lengths of 1m, 2m and 3m for 1, 2 and 3 ton
• 7:1 Safety factor
• Colour coded in accordance with EN14921-1
Simple but vital accessories,Hird lifting straps are strong,durable and a necessity for all types of lifting
Hird stock a comprehensive range of lifting slings for its customers for a wide range of applications.
1 - 3 ton1 - 3 ton
Can’t see what you are looking for? Call the Hird lifting team on 0203 174 0658.
Email: [email protected] www.hird.co.uk
Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only.
43
Hird’s secondary safety device offers an additional safetyfactor when using Hird’s range of vacuum lifters. Designedto be securely tightened around the load and attached tothe crane hook using heavy duty polypropylene straps. In the event of a machine failure resulting in the loss ofvacuum, Hird’s secondary safety device will allow the load to be safety lowered to the ground.
Variable length side straps allow use on most types of lifters.
Lifting accessories
Secondary Safety DeviceGlass Lifting Accessories
Safe use of slings
Sale& Hire
1.5 ton
1. When selecting slings, always take into account the size, shape and weight of the load you will be lifting.
2. Make sure you plan the lift and lowering operation before beginning.
3. Always examine your sling, ensuring that it has no defects and that its specifications are suitable for the job.
4. Make sure that your sling is protected from sharp edges, friction and abrasion, whether from the load or from the lifting appliance.
5. Slings should be used in a manner that spreads a load uniformly across their width.
6. All polyester slings have a selective resistanceto chemicals. Seek advice if exposure to chemicals is likely.
7. Polyester slings are suitable for use at temperatures up to 100°C and down to down to -40°C.
8. Ensure the load is balanced, that it is free to be lifted, and make a trial lift and lower.
9. Slings should only be used by trained operatives who are familiar with the method of rating and application of mode factors.
10. Slings should never be overloaded.
11. Slings should never be tied in knots or twisted.
12. Never use a damaged sling or attempt to repair a damaged sling.
13. Do not trap the sling when lowering a load and do not attempt to pull the sling from beneath a load.
14. Do not drag a load in the sling, or allow the sling to be dragged over the ground.
15. Avoid snatch or shock loading.
www.hird.co.uk
For glass lifting advice or any additional requirements, please contact the Hird Glass Handling Divisiondirect on 0203 174 0658
When planning to use any form of lifting equipment and accessories, it isimportant that you follow these important health and safety guidelines:
Safety Guide for Mini Cranes
• Read and fully understand any manuals and safety labels
• Ensure that anyone who may be operating the machine has the relative licenses and qualifications
• Wear the protective equipment and clothing suitable for work – such as helmet, safety shoes, safety belt, goggles, mask, gloves and hearing protectors
• Inspect the machine thoroughly before use
• Make sure you plan your work, keeping workplace rules and regulations in mind
• Do not attempt to use a machine out of the capabilities and purposes described in the users manual
• Make sure any accessories used are suited to each individual machine
• Never leave keys in a machine when unattended
If you have any questions on the safe operation of mini cranes, then do not hesitate to call the Hird team.
www.hird.co.uk
Email: [email protected]
Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 065844
Hird has three strategically located hire depotsserving the whole of the UK and Ireland.
Our Northern Depot is based in Hull, it is the original Hird depot and acts as our head office. We also havea Central Depot in Doncaster serving the EastMidlands, West Midlands and Wales.
Our Southern Depot in Redhill, Surrey is our newestdepot and serves the fast growing glass handling andglazing industry in London and the South.
All of our depots are dedicated to providing Hirdcustomers with the best powered access machines,mini cranes and glass lifting equipment available,along with first class contract lifting & machinemoving services and IPAF operator training.
Northern (Head Office)English StreetHull HU3 2BTTel: +44 (0)1482 227333Fax: +44 (0)1482 587710
Email: [email protected]
CentralUnit 2, Milethorn Lane Doncaster DN1 2SUTel: +44 (0)1302 341659Fax: +44 (0)1302 341675
Email: [email protected]
SouthernUnit 8, Redhill 23 Business Park Holmethorpe Avenue, Redhill RH1 2NBTel: +44 (0)203 174 0658Fax: +44 (0)1737 773188
Email: [email protected]
Depot Locations
We’ve got you covered
45
PHS-20
14