Ricoh Electronics, Inc. - Salvex · Thermal Media / Overseas Sales Group Location: 3-2-3...
Transcript of Ricoh Electronics, Inc. - Salvex · Thermal Media / Overseas Sales Group Location: 3-2-3...
Ricoh Electronics, Inc.
Ricoh is recognized around the worldfor its production and technologicalsuperiority in thermal media products:
Direct Thermal
Thermal Transfer
Thermal Rewritable
Ricoh Electronics, Inc.2320 Red Hill AvenueSanta Ana, CA. 92705
Toll Free No. 1 (800) 843-7058Toll Free Fax 1 (888) 843-7059e-mail: [email protected]
Territory : JapanCompany: RICOH Company, Ltd. Thermal Media / Overseas Sales GroupLocation: 3-2-3 Shinyokohama, Kouhoku-ku, Yokohama City, 222-8530, JapanManager : Kentaroh YamamotoTel: +81-45-477-1616Fax: +81-45-477-1622e-mail: [email protected]*********************************************************************Territory : Asia Pacific (South East Asia)Company: RICOH Asia Pacific Pte Ltd.Location: 103 Penang Rd. #08-01/07, Visioncrest Commercial, Singapore 238467Manager : Tomiharu “Tony” KinoshitaTel: +65-6830-5791Fax: +65-6830-5830e-mail: [email protected]*********************************************************************Territory : ChinaCompany: RICOH International (Shanghai) Co., Ltd. Location : #330 Xiya Road Waigaoqiao Free Trade Zone, Shanghai 200131 P.R. China Manager : Zhigang SongTel: (021)6485-1058 *8002Fax: (021)6495-8662e-mail: [email protected] *********************************************************************Territory : Asia Pacific (Inida)Company: Ricoh Thermal Media Asia Pacific Private Limited Location : 1201 Bld#12, Solitaire Corporate Park, Andheri-Ghatkopar Link Road, Andheri East, Mumbai 400 093, IndiaManager : Deepak GuptaTel: +91 22 4023 7032Fax: +91 22 6703 2099 e-mail: [email protected] *********************************************************************Territory : Europe, Middle East and AfricaCompany: RICOH Industrie France SAS Location : 144, route de Rouffach, F-68920 WETTOLSHEIM, France Manager : Jean ClaudeTel: +33-389-20-4102Fax: +33-389-20-4040 e-mail: [email protected] *********************************************************************Territory : South AmericaCompany: RICOH BRASIL S.A. / Thermal Media Group Location : Av. Ibirapuera, 2332, Torre 1, 8° andar, Moema, CEP 04028-002, São Paulo, SP, BrasilManager : Flávia CalillTel: +55 11 2575 4319e-mail: [email protected]
RICOH THERMAL MEDIA GLOBAL CONTACTS:
Toll-Free Number 1 (800) 843-7058Toll- Free Fax 1 (888) 843-7059
PLACING A PURCHASE ORDER BY E-MAIL OR FAX 24 HOURS A DAY
To place a PURCHASE ORDER please complete the RICOH PURCHASE ORDER form:
Customer Service will confirm the order and estimated ship date notified to you via e-mail or Fax.
1) Fill in your name, date, time, e-mail, phone number and Fax number.
2) Bill to and Ship to address.
3) Purchase Order Number.
4) Required Ship Date.
5) If shipping collect your carrier of choice.
6) Shipping terms.
7) ANY special instructions pertaining to the order.
8) If it is a Standard Size Roll-4-U.
9) Product Type.
10) Item Number.
11) Roll Quantity.
12) Slit roll size required.
13) MSI price.
14) Send form to Ricoh:
a) By e-mail: attach and send completed form to [email protected].
b) By Fax: send completed form toll free to 1 (888) 843-7059 within the USA. For international customers use 001 (949) 263-2152.
PURCHASE ORDER FORM
e-mail: [email protected]: www.rei.ricoh.com
ORDERED BY: _______________________________ DATE: ___________ TIME:________
PHONE #: _____________________ EXT: _________ FAX: ____________________
BILL TO: ____________________________ SHIP TO: ___________________________
_____________________________ _____________________________
_____________________________ _____________________________
_____________________________ _____________________________
P.O. NUMBER: _______________________
FREIGHT CARRIER: __________________ PPD/UP-CHARGE
PPD/ADD COLLECT 3PB
SPECIAL INSTRUCTIONS: ____________________________________________________
____________________________________________________
Standard Size Roll-4-U Repeat
REQ. SHIP DATE: ____________________
(If Collect)
PRODUCT TYPE QUANTITY SIZE / SLIT TO PRICE / MSIITEM NUMBER
E-MAIL: ___________________________
Toll-Free Number 1 (800) 843-7058Toll- Free Fax 1 (888) 843-7059
RICOH SAMPLE ROLL PROGRAM
To place a SAMPLE REQUEST please complete the RICOH SAMPLE REQUEST form:
All sample rolls are shipped Ground unless otherwise specified.
1) Fill in your name, date, e-mail address, phone number and Fax number.
2) Your complete company name and address.
3) Ship to address, if different, and recipient name.
4) Required ship date and shipping method.
5) Exact application and conditions.
6) Product you are requesting and number of rolls.
7) Printer model.
8) PLEASE NOTE: Wind direction applies to Thermal Transfer Ribbon only.
9) Send form to Ricoh:
a) By e-mail: attach and send completed form to [email protected].
b) By Fax: send completed form toll free to 1 (888) 843-7059 within the USA. For international customers use 001 (949) 263-2152.
Ricoh’s Sample Program provides product samples of all available materials for customer testing.Each Direct Thermal sample roll is 6.5” wide and 330 feet in length.
All sample rolls are available on a 3” paper core and are offered at NO CHARGE.
Thermal Transfer Ribbon sample rolls are available in 2”, 4”, and 6” wide by 164 feet in length.Printer model and wind direction are required.
Please contact our Customer Service Center at 1 (800) 843-7058. You may also send your sample request 24 hours a day by Fax to 1 (888) 843-7059 or e-mail to [email protected] using the SAMPLE REQUEST FORM.
RICOH SAMPLE REQUEST FORM
e-mail: [email protected]: www.rei.ricoh.com
REQUESTED BY: _______________________________ DATE: __________ TIME:______
PHONE #: _____________________ EXT: _________ FAX: ________________
PRODUCT TYPE QUANTITY WIDTH / LENGTH PRINTER / WIND DIRECTION
COMMENTS: _____________________________________________________________
APPLICATION: ____________________________________________________________ ____________________________________________________________
SHIP TO NAME: __________________________________________________________
ADDRESS: _______________________________________________________________ _______________________________________________________________
ATTENTION: _____________________________________________________________
CUSTOMER NAME: _______________________________________________________
ADDRESS: _______________________________________________________________ _______________________________________________________________
E-MAIL: ___________________________
Run-a-Splice®
Ricoh’s Run-a-Splice® is an exciting new innovation that should enable you to realize substantial cost savings through the increased efficiency in your converting operation.
Run-a-Splice® is a revolutionary thermal splicing system that allows you to print and die cut on your label press without having to re-splice the rolls while still providing you with high quality usable thermal labels for variable information printing.
This unique splice construction combines a base thermal paper identical to the rest of the roll with a clear printable tape. With Run-a-Splice® you can produce a high quality label without the need to slow the press for an approaching splice or perform costly rework of the rolls.
Lab tests show the barcodes will still scan, even when printed on the splice!
Run-a-Splice® Construction*:Same Thermal Face
(Width @ 1.25")Face Paper
Adhesive
Adhesive
Silicone Liner
Splice Tape (Width @ 2"±1/16")
Splice Gap
Four Ways To Save! Maintain Press Speed while Running and Printing through the Splice. Now there
is no need to reduce speed to hold registration and prevent splice breaks. No Lost Material due to Re-Splicing and Re-Working rolls No Lost Labor to Rewind Rolls and Re-Splice Faster Press Speeds + Reduced Labor & Waste Costs = $$ Savings for YOU!
Our test analysis has shown a possible savings of $0.005 to $0.015 per MSI.
Look for the Run-a-Splice® label on our laminated paper products.
Contact your Ricoh sales representative for more details at 1-800-843-7058 *Patent Pending on Construction
Ricoh Delivers Excellence in Image Communication for the Future….Today!
1
RICOH TMG TERMS & CONDITIONSACCEPTANCE. These are the sole terms and conditions on which an order from Customer for the following products, RICOH StandardSize Roll-4-U™, RICOH TrimLess Roll-4-U™, and RICOH Custom Roll-4-U™ (“Products”) will be accepted by Ricoh Electronics, Inc. (“REI”). No conditions stated by Customer in ordering or accepting Products shall be binding on REI unless expressly accepted in writing by REI.
PRICE TERMS. Prices are F.O.B. point of shipment. All prices are subject to change upon written notice to Customer. All sales, excise or similar taxes, which REI may be required to pay or collect with respect to the Products, shall be paid by Customer, except as otherwise provided by law. The terms of payment will be determined by REI.
SHIPMENT AND TRANSPORTATION TERMS. Unless otherwise provided, REI reserves the right to specify routing of shipments, and freight charges shall be prepaid and billed. If Customer specifies a carrier, the shipment will be made on a “Freight Collect” basis.
OVERRUNS OR UNDERRUNS. Shipments of Products to Customer may contain overruns or underruns not to exceed 10% on quantities ordered and the Customeragrees that the same shall constitute acceptable delivery. REI will bill for actual quantity delivered within this tolerance.
TITLE AND RISK OF LOSS. Delivery will be deemed complete, and title and risk of loss to Products shall pass to Customer upon delivery by REI to the carrier for transportation to Customer. Customer shall bear all risks to Products, including, but not limited to, risk of theft, loss, damage or delay of shipment, which may occur, after Products have been delivered to the carrier. Customer is responsible for filing all loss or damage claims with the carrier.
TRANSIT DAMAGE CLAIM PROCEDURE. “F.O.B. Point of Shipment” is the term of sale. Once a Product leaves REI’s shipping dock, it becomes the property of the Customer. It is the responsibility of the Customer to review the entire shipment at the time of receipt and make note on the freight bill of any damage or missing Product. A signed Bill of Lading without exception verifies that the Customer received the Products complete and without damage. In the event of a transit claim, REI is not responsible for such claim. REI shall not be responsible for any transit damage to the Product.
WARRANTIES AND LIMITATION OF LIABILITY. REI warrants that the Products sold to Customer shall be free from defects in material and workmanship for twelve (12) months from the date of shipment of the Products to Customer. This Warranty does not apply to defects not caused by REI or to Products, which have been modified by someone other than REI or not used in accordance with the Product’s Specifications. To make a claim under this Warranty, Customer must notify REI in writing within the warranty period. Such notice shall include the nature of the defect, serial number of the defective Products and any other relevant information. Customer shall not return Products to REI without prior written authorization from REI. REI’s written authorization will specify what should be returned to REI, the address for such returns and the carrier to be used by Customer for such returns. REI’s sole liability and Customer’s exclusive remedy under this Warranty or otherwise shall be limited to either replacing any Product proven to REI’s satisfaction to be defective and covered by this Warranty or accepting the return of any such Product and refunding or crediting to Customer the purchase price paid by the Customer for such Product at REI’s sole discretion. All costs of labor incurred by Customer or any third party to effect field replacement of the Products shall be the sole responsibility of Customer.
THE ABOVE WARRANTY IS IN LIEU OF ALL OTHER WRITTEN OR UNWRITTEN, EXPRESS OR IMPLIED WARRANTIES. REI EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCT.
This Warranty extends only to Customer and may not be transferred to any other person or entity. Should Customer transfer this Warranty to any other person or entity, REI’s liability will terminate. REI will not accept Warranty returns from or provide remedies to anyone else.
In no event, whether in contract, tort (including negligence), strict liability, indemnity or otherwise, shall REI be liable for any incidental, consequential, special or indirect damages, nor shall any recovery of any kind against REI be greater in amount than the purchase price of the Products sold to Customer.
PRODUCT DISCONTINUANCE. REI may discontinue manufacturing or selling any products at any time and will give Customer reasonable advance notice of such action. REI will endeavor to fill all purchase orders for Products received by REI prior to its notice of discontinuance of such Products, but it shall not be obligated to fill such purchase orders.
COMPLIANCE. All Products are manufactured in compliance with all applicable requirements of the Fair Labor Standards Act, as amended.
PATENT INDEMNITY. REI will defend Customer and pay any awards against Customer in the event of any lawsuit that claims that a Product sold to Customer constitutes an infringement of any U.S. patent of a third party. The indemnity set forth herein shall only apply if: (i) Customer promptly notifies REI of the filing of the lawsuit; and (ii) REI has full control of the defense and negotiations for settlement or compromise of all claims in the lawsuit. REI shall have no liability to Customer to the extent that the infringement arises out of or relates to: (i) infringing property which is not provided by REI; (ii) the improper use of the Product or the use of the Product in combination with other materials, products, software, equipment or services which are not supplied by REI; (iv) customized portions of a Product designed or produced in accordance with specifications or designs provided by Customer; and (v) alterations or amendments made to the Product which are not made by REI. Subject to the limitations stated herein, if a final injunction shall be obtained against Customer’s use of a Product, REI will, at its expense and option, procure for Customer the right to continue using the Product, or modify the Product to render such non-infringing, or replace such Product with a substantially equivalent non-infringing Product, or accept return of the Product and refund or credit to Customer the purchase price paid by the Customer for the Product.
INDEMNITY. Customer shall defend, hold harmless and indemnify REI from and against any and all losses, claims, liabilities, costs and expenses, including reasonable attorneys’ fees, arising out of or relating to a claim by a third party based on the use or a combination of a Product with any other product not provided or manufactured by REI, or based on Products made in accordance with Customer’s specifications or designs, or a modification of a Product after delivery by REI, or the use of the Product in the practice of a process.
COMPLIANCE WITH EXPORT LAWS. Customer shall comply with all applicable laws and regulations, if it exports or re-exports the Products.
EXCUSABLE DELAYS. Neither party shall be responsible for failure or delay in performing any obligation under these Terms and Conditions due to causes beyond its control, including, but not limited to, fire, storm, flood, earthquake, act of God or public enemy, provided the party so delayed gives written notice of the delay within ten (10) days after the beginning of such cause.
APPLICABLE LAW. The parties agree that these Terms and Conditions shall be deemed to be accepted by Customer in Orange County, California, and all questions concerning the validity, interpretation, or performance of any of its terms and provisions or any rights or obligations of the parties hereto shall be governed by and resolved in accordance with the laws of the State of California.
ARBITRATION. Except for breach of the confidentiality provisions contained herein, any controversy or claim arising out of or relating to these Terms and Conditions or the breach thereof will be submitted to final and binding arbitration before J.A.M.S./ENDISPUTE, or its successor, pursuant to the United States Arbitration Act, 9 U.S.C. Sec. 1 et seq. Either party may start the arbitration process by filing a written demand with J.A.M.S./ENDISPUTE, with a copy to the other party. The J.A.M.S./ENDISPUTE’s Comprehensive Arbitration Rules, in effect at the time the demand is filed, shall govern the arbitration. The arbitration shall be held in Orange County, California. Each party will share equally in its costs.
AMENDMENT. No provision of these Terms and Conditions may be amended or otherwise modified except by an instrument in writing signed by duly authorized officers of REI and Customer.
CONFIDENTIALITY. Confidential Information means any information received by a party from the other party that is identified as confidential or under the circumstances of disclosure should be considered confidential. REI and Customer agree to keep all Confidential Information received from the other party confidential and not to disclose such information to a third party.
WAIVER. The failure of either party to enforce at any time, or for any period of time, any provision of these Terms and Conditions shall not be construed as a waiver of the provision or the right of the party to enforce the provision.
NO AUTHORITY. Nothing in these Terms and Conditions shall authorize or empower either party to assume or create any obligation or responsibility whatsoever on behalf of the other party or to bind the other party in any manner, or make any representation, warranty, or commitment on behalf of the other party.
Toll-Free No. 1 (800) 843-7058Toll-Free Fax 1 (888) 843-7059e-mail: [email protected]
DIRECT THERMAL PRODUCTS
All data is for reference only. It is the responsibility of the end user to test all thermal and adhesive properties prior to use.All Ricoh direct thermal products are BPA free.
Product Feature
140LDS
105µm.
130NIR-3
N140LA
N150LA-2
86µm.
81µm.
78µm.
La
be
l Sto
ckS
yn
the
tic
Sto
ck 68µm.
140LES
Ricoh Electronics, Inc.2320 Red Hill Avenue Santa Ana, CA. 92705
Medium-High image resolution,high barcode reliability.
Scale labels, inventory control, foodlabels, poultry labels, and parts ID.
High image sensitivity and excellentimage resolution with superb headmatching performance and ideal forhigh speed printing.
Food packing labels, poultry labels,shipment tracking labels, parts andproduct ID.Multi-Application product.
Medium-High sensitivity and imagedurability that resists solvents, soaps,lotions and sanitizers.
Prescription labels, hospital labels,pharmaceutical and healthcare applications.
150PRX 84µm.
***The cost effective 140PSS-1 is designed for industrial warehouse and courier use and is NOT recommended for use with weigh scales and applications with exposure to oils, plasticizers and film wrap materials.
High sensitivity polypropylene,a durable base film, thinner thanthe 140LES.
Shelf price tags, laboratorylabels, test tubes and produceapplications.
High sensitivity polypropylene,a durable base film for tearresistance.
Airline baggage tags, lab labels,hospital wristbands, bin labels, shelf price tags & ski lift tickets.
ThicknessApplication
Product Feature ThicknessApplication
Medium heat resistance, able toscan up to 660nm.
Inventory control labels, parts IDand shipping label applications.
ADHESIVE GUIDE
G22: General Purpose Permanent Hot Melt AdhesiveHigh initial contact.Excellent adhesion on packaging boxes, film and /or a wide range of substrates.Complies with F.D.A. 175.105 for Indirect Food Contact.
G25: Wide Temperature Permanent AdhesiveExcellent adhesion to a wide variety of surfaces including paper, wax paper bags, corrugated board, light waxed corrugatedboard, various packaging films, glass enamel, and polyethylene, as well as, other plastic substrates.Specially designed for adhesion to cryovac film, even with light moisture condensation and to other low energy surfaces.Excellent initial tack. Very good self-dispensing in automatic printers.Complies with F.D.A. 175.105 for Indirect Food Contact.
G8: Tight Removable AdhesiveGood adhesion to most packaging substrates. Excellent removability from most surfaces.Applications include shelf tags, retail price labels, medical, industrial and other labeling applications that require a clean removable property.Complies with F.D.A. 175.105 for Indirect Food Contact.
G5: General Purpose Permanent Hot Melt AdhesiveHigh initial contact.Excellent adhesion on packaging boxes, film and /or a wide range of substrates.Complies with F.D.A. 175.105 for Indirect Food Contact.
Note: Data represents product averages. Each product should be tested for the end-use application to ensure the product meets all specific application requirements.
e-mail: [email protected]: www.rei.ricoh.com
0 ° F 3 5 ° F R .T . 1 0 ° F R .T . 0 ° F 3 5 ° F R .T . 0 ° F 3 5 ° F R .T .
P AP E R
G LAS S
A p p lic a tio n
C o n d itio n s
S e r v ic e
T e m p e r a tu r e
P AC K AG ING F ILMS
P LAS T IC
C OR R UG AT E D B OX
ME T AL
( -6 5 ° F to 1 3 1 ° F )
A p p lie d a t A p p lie d a t A p p lie d a t A p p lie d a t
(-4 0 ° F to 1 3 1 ° F ) (-2 0 ° F to 1 2 0 ° F ) (-4 0 ° F to 1 2 2 ° F )
G 2 2
(-4 0 ° F to 1 2 2 ° F )
-4 0 ° C to 5 5 ° C -2 9 ° C to 4 9 ° C -4 0 ° C to 5 0 ° C -5 4 ° C to 5 5 ° C
(3 5 ° F to 1 2 0 ° F ) (1 0 ° F to 1 2 0 ° F ) (2 8 ° F to 1 2 2 ° F )
A D H E S IV E S
G 2 5
2 ° C to 4 9 ° C -1 2 ° C to 4 9 ° C -2 ° C to 5 0 ° C -4 0 ° C to 5 0 ° C
G 5 G 8
A p p lic a tio n
T e m p e r a tu r e
E x c e lle n t - T e s t in a c tu a l a p p lic a tio n
F a ir - T e s t fo r s u ita b ility
N O T R e c o m m e n d e d
APPLICATION GUIDE
e-mail: [email protected]: www.rei.ricoh.com
N 1 4 0 L A N 1 5 0 L A -2 1 5 0 P R x 1 3 0 N IR -3 1 4 0 L E S 1 4 0 L D S
E x c e lle n t - T e s t in a c tu a l a p p lic a tio n
F a ir - T e s t fo r s u ita b ility
W R IS TB ANDS
LAB OR ATOR Y LAB E LS
AIR LINE B AG G AG E TAG S
S HE LF TAG S
G R OC E R Y S TOR E / F OOD & S C ALE
C OUR IE R / S HIP P ING
INDUS TR IAL W AR E HOUS E / MANUF AC TUR ING
HE ALTHC AR E / P R E S C R IP TION
P A P E R S T O C K
A p p lic a tio n
ME AT P R OC E S S ING
F IL M S T O C K
130NIR‐3DIRECT THERMAL PAPERFEATURES
Medium sensitivity Heat resistantNear InfraRed Able to scan up to 660nm
APPLICATION AREAS
Shipping Labels Distribution Labels
PAPER PROPERTIESITEM UNIT
lbs (24x36x500 Sheets)g/m²milµm
Image ColorImage Density (ODU) Minimum
MD gf MinimumCD gf MinimumMD kgf/15mm MinimumCD kgf/15mm MinimumMD g‐cm MinimumCD g‐cm Minimum
Initial Activation Temp. (O.D.=0.2) °F / °CEffective Activation Temp. (O.D.=0.8) °F / °C
PRESERVATION PROPERTIESITEM SPECIFICATION
Image 0.80 MinimumBackground 0.20 MaximumImage 0.50 MinimumBackground 0.20 MaximumImage 0.80 MinimumBackground 0.20 Maximum
CERTIFICATES / REGULATIONS / DIRECTIVES
BPA Free RoHS ISO 9001 REACHIndirect Food Contact WEEE ISO 14001
RICOH Electronics, Inc. Customer Service: 1 (800) 843‐70582320 Red Hill Avenue, Santa Ana, CA 92705 Toll Free FAX: 1 (800) 843‐70591125 Hurricane Shoals Road, Lawrenceville, GA 30043 E‐mail: [email protected]
Moisture Resistance
Heat Resistance
08/31/2012 ‐ Rev. A
Specifications may change without notice.
www.rei.ricoh.com
212 / 100
TAPPI T‐411
TAPPI T‐414
TAPPI T‐494
Visual CheckX‐Rite Densitometer1.00
25305.4
Caliper
Tear Strength
Tensile Strength
3.281 ± 8Black
2.7
Basis Weight
TEST METHOD43.0 ± 4.9
SPECIFICATION
70 ± 8TAPPI T‐410
TAPPI T‐489
TEST METHOD
Oil Resistance40° C, Dry, 15 Hours
X‐Rite (ODU)
257 / 125
80° C, Dry, 1 HourX‐Rite (ODU)
40° C, 90% R.H., 24 HoursX‐Rite (ODU)
3.0Stiffness2.0
130NIR‐3 ‐ LAMINATED PRODUCTUNIT
Application °F Temperature °C Service °F Temperature °C Basis Weight lbs (24 x 36 x 500) g/m²
µmmil
Liner: 40lbs SC White KraftCaliper: 2.5 Mils ± 10% (64 ± 8µm)Opacity: 65% Maximum (Photovolt)Storage Condition: Below 95°F (35°C) and less than 85% R.H. in a warehouse, avoiding direct sunlight.
RICOH Electronics, Inc. Customer Service: 1 (800) 843‐70582320 Red Hill Avenue, Santa Ana, CA 92705 Toll Free FAX: 1 (800) 843‐70581125 Hurricane Shoals Road, Lawrenceville, GA 30043 E‐mail: [email protected]
08/31/2012 ‐ Rev. A
‐40 to 122
www.rei.ricoh.com
Specifications may change without notice.Sensitivity curves are for reference only.
152 ± 18
‐40 to 50‐65 to 131
G25GRADE
Caliper6.0
160 ± 19
‐54 to 5598 ± 12
Dynamic Sensitivity
0.00.20.40.60.81.01.21.41.6
7.79
3
11.6
89
15.5
85
19.4
82
23.3
78
27.2
74
31.1
71
35.0
67
38.9
64
42.8
60
46.7
56
Heat Energy (mJ/mm2)
Opt
ical
Den
sity
Static Sensitivity
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.460 80 100
120
140
160
180
200
Temperature (°C)
Opt
ical
Den
sity
130NIR‐3PAPEL TERMICO DIRECTOCARACTERISTICAS
Media ‐ alta sensibilidad Resistente al calorInfrarrojo cercano Escanear hasta 660 nano metros
APPLICATION AREAS
Etiquetas de envío Etiquetas de distribución
PROPIEDADES DEL PAPELTEMA UNIDAD
lbs (24x36x500 Hojas)g/m²milµm
Imagen de ColorImagen de Densidad (ODU) Mínimo
MD gf MínimoCD gf MínimoMD kgf/15mm MínimoCD kgf/15mm MínimoMD g‐cm MínimoCD g‐cm Mínimo
Temperatura de la activacíon inicial (O.D.=0.2) °F / °CTemperatura de activacíon efectiva (O.D.=0.8) °F / °C
PROPIEDADES DE CONSERVACIONTEMA ESPECIFICACIONES
Imagen 0.80 MínimoFondo 0.20 MáximoImagen 0.50 MínimoFondo 0.20 MáximoImagen 0.80 MínimoFondo 0.20 Máximo
CERTIFICADOS / REGULACIONES / DIRECTIVAS
Libre de BPA RoHS ISO 9001 REACHIndirecto en contacto con alimetos WEEE ISO 14001
RICOH Electronics, Inc. Servicio al cliente: 1 (800) 843‐70582320 Red Hill Avenue, Santa Ana, CA 92705 FAX gratuito: 1 (800) 843‐70591125 Hurricane Shoals Road, Lawrenceville, GA 30043 E‐mail: [email protected]
Rigidez TAPPI T‐4892.0
SPECIFICATION TEST METHOD
Base de Peso 43.0 ± 4.9 TAPPI T‐41070 ± 8
Calibre 3.2 TAPPI T‐41181 ± 8Black Comprobar de forma visual1.00 X‐Rite Densitómetro
Resistencia al Desgarro 25 TAPPI T‐41430
Resistencia a la tracción 5.4 TAPPI T‐4942.73.0
212 / 100257 / 125
TEST METHOD
Resistencia al aceite40° C, Dry, 15 Horas
X‐Rite (ODU)
Resistencia a la humedad40° C, 90% R.H., 24 Horas
X‐Rite (ODU)
Resistencia al calor80° C, en Seco, 1 Hora
X‐Rite (ODU)
Las especificaciones pueden cambiar sin previo aviso.
www.rei.ricoh.com 08/31/2012 ‐ Rev. A
130NIR‐3 ‐ PRODUCTO LAMINADOUNIDAD
Aplicación °F Temperatura °C Servicio °F Temperatura °C Base de Peso libras (24 x 36 x 500) g/m²
µmmil
Liner: 40 libras SC White KraftCaliper: 2.5 Mils ± 10% (64 ± 8µm)Opacity: 65% Maximum (Photovolt)Storage Condition: Below 95°F (35°C) and less than 85% R.H. in a warehouse, avoiding direct sunlight.
RICOH Electronics, Inc. Servicio al cliente: 1 (800) 843‐70582320 Red Hill Avenue, Santa Ana, CA 92705 FAX gratuito: 1 (800) 843‐70581125 Hurricane Shoals Road, Lawrenceville, GA 30043 E‐mail: [email protected]
G25GRAD0‐40 a 122‐40 a 50‐65 a 131
www.rei.ricoh.com 08/31/2012 ‐ Rev. A
152 ± 18
Las especificaciones pueden cambiar sin previo aviso.Curvas de sensibilidad son sólo para referencia.
6.0 Calibre
160 ± 1998 ± 12‐54 a 55
Sensibilidad Dinámica
0.00.20.40.60.81.01.21.41.6
7.79
3
11.6
89
15.5
85
19.4
82
23.3
78
27.2
74
31.1
71
35.0
67
38.9
64
42.8
60
46.7
56
Energía del Calor (mJ/mm2)
Den
sida
d O
ptic
a
Sensibilidad Estática
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.660 70 80 90 100
110
120
130
140
150
Temperatura (°C)
Den
sida
d op
tica
Sensibilidad Dinámica
0.00.20.40.60.81.01.21.41.6
7.79
3
11.6
89
15.5
85
19.4
82
23.3
78
27.2
74
31.1
71
35.0
67
38.9
64
42.8
60
46.7
56
Energía del Calor (mJ/mm2)
Den
sida
d O
ptic
a
Sensibilidad Estática
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.460 80 100
120
140
160
180
200
Temperatura (°C)
Den
sida
d O
ptic
a
N140LADIRECT THERMAL PAPER
FEATURES
Medium‐high sensitivity Medium‐high image resolutionMedium speed printing Standard top‐coated thermal paper
APPLICATION AREAS
Weigh Scale labels Shipping labels Parts I.D. Distribution labels
PAPER PROPERTIESITEM UNIT
lbs (24x36x500 Sheets)g/m²milµm
Image ColorImage Density (ODU) Minimum
MD gf MinimumCD gf MinimumMD kgf/15mm MinimumCD kgf/15mm MinimumMD g‐cm MinimumCD g‐cm Minimum
Initial Activation Temp. (O.D.=0.2) °F / °CEffective Activation Temp. (O.D.=0.8) °F / °C
PRESERVATION PROPERTIESITEM SPECIFICATION
Image 1.10 MinimumBackground 0.30 MaximumImage 1.10 MinimumBackground 0.30 MaximumImage 1.10 MinimumBackground 0.30 MaximumImage 1.10 MinimumBackground 0.30 Maximum
CERTIFICATES / REGULATIONS / DIRECTIVES
BPA Free RoHS ISO 9001 REACHIndirect Food Contact WEEE ISO 14001
RICOH Electronics, Inc. Customer Service: 1 (800) 843‐70582320 Red Hill Avenue, Santa Ana, CA 92705 Toll Free FAX: 1 (800) 843‐70591125 Hurricane Shoals Road, Lawrenceville, GA 30043 E‐mail: [email protected]
Stiffness TAPPI T‐4892.5
8/31/2012 ‐ Rev. A
Specifications may change without notice.
www.rei.ricoh.com
40° C, 90% R.H., 24 HoursMacbeth (ODU)80° C, Dry, 1 HourMacbeth (ODU)
5,000 lx, 100 HoursMacbeth (ODU)
Moisture Resistance
Heat Resistance
Light Resistance
TEST METHOD
Oil Resistance40° C, Dry, 15 HoursMacbeth (ODU)
221 / 105
TAPPI T‐411
TAPPI T‐414
TAPPI T‐494
Visual CheckMacBeth Densitometer
2.73.0
194 / 90
1.2530355.4
Caliper
Tear Strength
Tensile Strength
Basis Weight
TEST METHOD47.9 ± 4.9
SPECIFICATION
78 ± 8TAPPI T‐410
3.281 ± 8Black
N140LA ‐ LAMINATED PRODUCTUNIT
Application °F Temperature °C Service °F Temperature °C Basis Weight lbs (24 x 36 x 500) g/m²
µmmil
Liner: 40lbs SC White KraftCaliper: 2.5 Mils ± 10% (64 ± 8µm)Opacity: 65% Maximum (Photovolt)Storage Condition: Below 95°F (35°C) and less than 85% R.H. in a warehouse, avoiding direct sunlight.
RICOH Electronics, Inc. Customer Service: 1 (800) 843‐70582320 Red Hill Avenue, Santa Ana, CA 92705 Toll Free FAX: 1 (800) 843‐70591125 Hurricane Shoals Road, Lawrenceville, GA 30043 E‐mail: [email protected]
6.0 6.0 6.2 Caliper
8/31/2012 ‐ Rev. A
G2510 to 120 ‐40 to 122
G2228 to 122‐2 to 50
www.rei.ricoh.com
‐29 to 49 ‐54 to 5595 ± 12 98 ± 12
Specifications may change without notice.Sensitivity curves are for reference only.
‐40 to 122
154 ± 19 160 ± 19
‐12 to 49 ‐40 to 50
GRADE
152 ± 18 152 ± 18 157 ± 18
‐40 to 50101 ± 12164 ± 19
‐20 to 120 ‐65 to 131
G8
Dynamic Sensitivity
0.00.20.40.60.81.01.21.41.6
7.79
3
11.6
89
15.5
85
19.4
82
23.3
78
27.2
74
31.1
71
35.0
67
38.9
64
42.8
60
46.7
56
Heat Energy (mJ/mm2)
Opt
ical
Den
sity
Static Sensitivity
0.0
0.2
0.4
0.60.8
1.0
1.2
1.4
1.660 70 80 90 100
110
120
130
140
150
Temperature (°C)
Opt
ical
Den
sity
N140LAPAPEL TERMICO DIRECTO
CARACTERISTICAS
Media ‐ alta sensibilidad Media ‐ alta resolucion de imagenImpresion de velocida media Norma superior recubierta de papel térmico
AREAS DE APLICACION
Etiquetas de escala de peso Etiquetas de envío Etiquetas de distribucíon
PROPIEDADES DEL PAPELTEMA UNIDAD
lbs (24x36x500 Hojas)g/m²milµm
Imagen de ColorImagen de Densidad (ODU) Mínimo
MD gf MínimoCD gf MínimoMD kgf/15mm MínimoCD kgf/15mm MínimoMD g‐cm MínimoCD g‐cm Mínimo
Temperatura de la activacíon inicial (O.D.=0.2) °F / °CTemperatura de activacíon efectiva (O.D.=0.8) °F / °C
PROPIEDADES DE CONSERVACIONTEMA ESPECIFICACIONES
Imagen 1.10 MínimoFondo 0.30 MáximoImagen 1.10 MínimoFondo 0.30 MáximoImagen 1.10 MínimoFondo 0.30 MáximoImagen 1.10 MínimoFondo 0.30 Máximo
CERTIFICADOS / REGULACIONES / DIRECTIVAS
BPA Free RoHS ISO 9001 REACHIndirecto en contacto con alimetos WEEE ISO 14001
RICOH Electronics, Inc. Servicio al cliente: 1 (800) 843‐70582320 Red Hill Avenue, Santa Ana, CA 92705 FAX gratuito: 1 (800) 843‐70591125 Hurricane Shoals Road, Lawrenceville, GA 30043 E‐mail: [email protected]
Base de Peso 47.9 ± 4.9 TAPPI T‐41078 ± 8
Calibre 3.2 TAPPI T‐41181 ± 8
194 / 90
Resistencia a la tracción 5.4 TAPPI T‐4942.7
Rigidez TAPPI T‐4892.53.0
221 / 105
METODO DE PRUEBA
Resistencia al aceite40° C, en Seco, 15 Horas
Macbeth (ODU)
Resistencia a la humedad40° C, 90% R.H., 24 Horas
Macbeth (ODU)
Resistencia al calor80° C, en Seco, 1 Hora
Macbeth (ODU)
Resistencia a la luz5,000 lx, 100 HorasMacbeth (ODU)
Las especificaciones pueden cambiar sin previo aviso.
www.rei.ricoh.com 8/31/2012 ‐ Rev. A
Resistencia al Desgarro 30 TAPPI T‐41435
Negro
Identificatión de piezas
Comprobar de forma visual1.25 MacBeth Densitómetro
ESPECIFICACIONES METODO DE PRUEBA
N140LA ‐ PRODUCTO LAMINADOUNIDAD
Aplicación °F Temperatura °C Servicio °F Temperatura °C Base de Peso libras (24 x 36 x 500) g/m²
µmmil
Forro: 40 libras SC White KraftCalibre: 2.5 Mils ± 10% (64 ± 8µm)Opacidad: 65% Máximo (Photovolt)Condiciones de Almacenamiento: Por debajo 95°F (35°C) y menos del 85% de humidad relativa en un almacén, evitando la luz
RICOH Electronics, Inc. Servicio al cliente: 1 (800) 843‐70582320 Red Hill Avenue, Santa Ana, CA 92705 FAX gratuito: 1 (800) 843‐70591125 Hurricane Shoals Road, Lawrenceville, GA 30043 E‐mail: [email protected]
Calibre6.0 6.0 6.2
G8 G25 G2228 a 122
‐12 a 49 ‐40 a 50 ‐2 a 50‐40 a 122
‐29 a 49 ‐54 a 55 ‐40 a 50101 ± 12
154 ± 19 160 ± 19 164 ± 19
www.rei.ricoh.com 8/31/2012 ‐ Rev. A
directa del sol.
152 ± 18 152 ± 18 157 ± 18
Curvas de sensibilidad son sólo para referencia.Las especificaciones pueden cambiar sin previo aviso.
95 ± 12 98 ± 12
‐20 a 120 ‐65 a 131
10 a 120 ‐40 a 122GRAD0
Sensibilidad Dinámica
0.00.20.40.60.81.01.21.41.6
7.79
3
11.6
89
15.5
85
19.4
82
23.3
78
27.2
74
31.1
71
35.0
67
38.9
64
42.8
60
46.7
56
Energía del Calor (mJ/mm2)
Den
sida
d O
ptic
a
Sensibilidad Estática
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.660 70 80 90 100
110
120
130
140
150
Temperatura (°C)
Den
sida
d op
tica
N150LA‐2DIRECT THERMAL PAPER
FEATURES
High sensitivity High image resolution with superior barcode reliabilityHigh speed printing Superb print head‐matching performance
APPLICATION AREAS
Weigh Scale labels Shipping labels Parts I.D. Distribution labels
PAPER PROPERTIESITEM UNIT
lbs (24x36x500 Sheets)g/m²milµm
Image ColorImage Density (ODU) Minimum
MD gf MinimumCD gf MinimumMD kgf/15mm MinimumCD kgf/15mm MinimumMD g‐cm MinimumCD g‐cm Minimum
Initial Activation Temp. (O.D.=0.2) °F / °CEffective Activation Temp. (O.D.=0.8) °F / °C
PRESERVATION PROPERTIESITEM SPECIFICATION
Image 1.20 MinimumBackground 0.15 MaximumImage 1.20 MinimumBackground 0.15 MaximumImage 1.20 MinimumBackground 0.20 MaximumImage 1.20 MinimumBackground 0.15 Maximum
CERTIFICATES / REGULATIONS / DIRECTIVES
BPA Free RoHS ISO 9001 REACHIndirect Food Contact WEEE ISO 14001
RICOH Electronics, Inc. Customer Service: 1 (800) 843‐70582320 Red Hill Avenue, Santa Ana, CA 92705 Toll Free FAX: 1 (800) 843‐70591125 Hurricane Shoals Road, Lawrenceville, GA 30043 E‐mail: [email protected]
Stiffness2.5
TAPPI T‐498
TEST METHOD
Oil Resistance40° C, Dry, 15 Hours
X‐Rite (ODU)
266 / 130
Basis Weight
TEST METHOD44.2 ± 4.9
SPECIFICATION
72 ± 8TAPPI T‐410
35.05.4
Caliper
Tear Strength
Tensile Strength
3.077 ± 9Black
2.73.0
248 / 120
TAPPI T‐411
TAPPI T‐414
TAPPI T‐494
Visual CheckTSOP‐08841.30
30.0
100° C, Dry, 1 HourX‐Rite (ODU)
5,000 lx, 100 HoursX‐Rite (ODU)
Moisture Resistance
Heat Resistance
Light Resistance
40° C, 90% R.H., 24 HoursX‐Rite (ODU)
Specifications may change without notice.
www.rei.ricoh.com 08/31/2012 ‐ Rev. A
N150LA‐2 ‐ LAMINATED PRODUCTUNIT
Application °F Temperature °C Service °F Temperature °C Basis Weight lbs (24 x 36 x 500) g/m²
µmmil
Liner: 40lbs SC White KraftCaliper: 2.5 Mils ± 10% (64 ± 8µm)Opacity: 65% Maximum (Photovolt)Storage Condition: Below 95°F (35°C) and less than 85% R.H. in a warehouse, avoiding direct sunlight.
RICOH Electronics, Inc. Customer Service: 1 (800) 843‐70582320 Red Hill Avenue, Santa Ana, CA 92705 Toll Free FAX: 1 (800) 843‐70591125 Hurricane Shoals Road, Lawrenceville, GA 30043 E‐mail: [email protected]
GRADE
‐65 to 131
G25
‐40 to 50
95 ± 12
Specifications may change without notice.Sensitivity curves are for reference only.
148 ± 19154 ± 19
‐40 to 122
Caliper5.8
08/31/2012 ‐ Rev. Awww.rei.ricoh.com
‐54 to 55
Dynamic Sensitivity
0.00.20.40.60.81.01.21.41.61.8
7.79
3
11.6
89
15.5
85
19.4
82
23.3
78
27.2
74
31.1
71
35.0
67
38.9
64
42.8
60
46.7
56
Heat Energy (mJ/mm2)
Opt
ical
Den
sity
Static Sensitivity
0.0
0.2
0.4
0.60.8
1.0
1.2
1.4
1.660 80 100
120
140
160
180
200
Temperature (°C)
Opt
ical
Den
sity
N150LA‐2PAPEL TERMICO DIRECTO
CARACTERISTICAS
Alta sensibilidad Alta resolucion de imagen y legibilidad de código de barrasImpresion de alta velocida Excelente rendimiento de coincidencia de cabezal de impresión
AREAS DE APLICACION
Etiquetas de escala de peso Etiquetas de envío Etiquetas de distribucíon
PROPIEDADES DEL PAPELTEMA UNIDAD
lbs (24x36x500 Hojas)g/m²milµm
Imagen de ColorImagen de Densidad (ODU) Mínimo
MD gf MínimoCD gf MínimoMD kgf/15mm MínimoCD kgf/15mm MínimoMD g‐cm MinimumCD g‐cm Minimum
Temperatura de la activacíon inicial (O.D.=0.2) °F / °CTemperatura de activacíon efectiva (O.D.=0.8) °F / °C
PROPIEDADES DE CONSERVACIONTEMA ESPECIFICACIONES
Imagen 1.20 MínimoFondo 0.15 MáximoImagen 1.20 MínimoFondo 0.15 MáximoImagen 1.20 MínimoFondo 0.20 MáximoImagen 1.20 MínimoFondo 0.15 Máximo
CERTIFICADOS / REGULACIONES / DIRECTIVAS
Libre de BPA RoHS ISO 9001 REACHIndirecto en contacto con alimetos WEEE ISO 14001
RICOH Electronics, Inc. Servicio al cliente: 1 (800) 843‐70582320 Red Hill Avenue, Santa Ana, CA 92705 FAX gratuito: 1 (800) 843‐70591125 Hurricane Shoals Road, Lawrenceville, GA 30043 E‐mail: [email protected]
TAPPI T‐41435.0
Negro
Identificatión de piezas
Comprobar de forma visual1.30 TSOP‐0884
ESPECIFICACIONES METODO DE PRUEBA
08/31/2012 ‐ Rev. A
40° C, 90% R.H., 24 HorasX‐Rite (ODU)
Resistencia al calor100° C, en Seco, 1 Hora
X‐Rite (ODU)
Resistencia a la luz5,000 lx, 100 Horas
X‐Rite (ODU)
Las especificaciones pueden cambiar sin previo aviso.
www.rei.ricoh.com
METODO DE PRUEBA
Resistencia al aceite40° C, en Seco, 15 Horas
X‐Rite (ODU)
Resistencia a la tracción 5.4 TAPPI T‐4942.7
Rigidez TAPPI T‐4982.53.0
TAPPI T‐41072 ± 8
Calibre 3.0 TAPPI T‐41177 ± 9
Base de Peso 44.2 ± 4.9
248 / 120266 / 130
Resistencia a la humedad
Resistencia al Desgarro 30.0
N150LA‐2 ‐ PRODUCTO LAMINADOUNIDAD
Aplicación °F Temperatura °C Servicio °F Temperatura °C Base de Peso libras (24 x 36 x 500) g/m²
µmmil
Forro: 40 libras SC White KraftCalibre: 2.5 Mils ± 10% (64 ± 8µm)Opacidad: 65% Máximo (Photovolt)Condiciones de Almacenamiento: Por debajo 95°F (35°C) y menos del 85% de humidad relativa en un almacén, evitando la luz
RICOH Electronics, Inc. Servicio al cliente: 1 (800) 843‐70582320 Red Hill Avenue, Santa Ana, CA 92705 FAX gratuito: 1 (800) 843‐70591125 Hurricane Shoals Road, Lawrenceville, GA 30043 E‐mail: [email protected]
www.rei.ricoh.com 08/31/2012 ‐ Rev. A
directa del sol.
148 ± 19
Curvas de sensibilidad son sólo para referencia.Las especificaciones pueden cambiar sin previo aviso.
154 ± 1995 ± 12‐54 a 55‐65 a 131‐40 a 50‐40 a 122
G25
Calibre5.8
GRAD0
Static Sensitivity
0.00.2
0.40.60.8
1.01.2
1.41.6
60 80 100
120
140
160
180
200
Temperature (°C)
Opt
ical
Den
sity
Sensibilidad Dinámica
0.00.20.40.60.81.01.21.41.61.8
7.79
3
11.6
89
15.5
85
19.4
82
23.3
78
27.2
74
31.1
71
35.0
67
38.9
64
42.8
60
46.7
56
Energía del Calor (mJ/mm2)
Den
sida
d O
ptic
a
150PRxDIRECT THERMAL PAPER
FEATURES
Medium‐high sensitivity Soap, lotion, and hand sanitizer resistantSpecially‐coated label stock with image durability
APPLICATION AREAS
Healthcare / Presription Weigh Scale labels
PAPER PROPERTIESITEM UNIT
lbs (24x36x500 Sheets)g/m²milµm
Image ColorImage Density (ODU) Minimum
MD gf MinimumCD gf MinimumMD kgf/15mm MinimumCD kgf/15mm MinimumMD g‐cm MinimumCD g‐cm Minimum
Initial Activation Temp. (O.D.=0.2) °F / °CEffective Activation Temp. (O.D.=0.8) °F / °C
PRESERVATION PROPERTIESITEM SPECIFICATION
Image 1.10 MinimumBackground 0.15 MaximumImage 1.10 MinimumBackground 0.15 MaximumImage 1.10 MinimumBackground 0.30 MaximumImage 1.10 MinimumBackground 0.15 Maximum
CERTIFICATES / REGULATIONS / DIRECTIVES
BPA Free RoHS ISO 9001 REACHIndirect Food Contact WEEE ISO 14001
RICOH Electronics, Inc. Customer Service: 1 (800) 843‐70582320 Red Hill Avenue, Santa Ana, CA 92705 Toll Free FAX: 1 (800) 843‐70591125 Hurricane Shoals Road, Lawrenceville, GA 30043 E‐mail: [email protected]
Stiffness TAPPI T‐4892.5
Meat Processing
3.384 ± 9Black
TEST METHOD47.3 ± 4.9
SPECIFICATION
TAPPI T‐410
Caliper
Tear Strength
Tensile Strength
Basis Weight
1.2530355.42.7
77 ± 8
3.0
212 / 100
TAPPI T‐411
TAPPI T‐414
TAPPI T‐494
Visual CheckX‐Rite Densitometer
TEST METHOD
Oil Resistance40° C, Dry, 15 Hours
X‐Rite (ODU)
239 / 115
40° C, 90% R.H., 24 HoursX‐Rite (ODU)
80° C, Dry, 1 HourX‐Rite (ODU)
5,000 lx, 100 HoursX‐Rite (ODU)
Moisture Resistance
Heat Resistance
Light Resistance
08/31/2012 ‐ Rev. A
Specifications may change without notice.
www.rei.ricoh.com
150PRx ‐ LAMINATED PRODUCTUNIT
Application °F Temperature °C Service °F Temperature °C Basis Weight lbs (24 x 36 x 500) g/m²
µmmil
Liner: 40lbs SC White KraftCaliper: 2.5 Mils ± 10% (64 ± 8µm)Opacity: 65% Maximum (Photovolt)Storage Condition: Below 95°F (35°C) and less than 85% R.H. in a warehouse, avoiding direct sunlight.
RICOH Electronics, Inc. Customer Service: 1 (800) 843‐70582320 Red Hill Avenue, Santa Ana, CA 92705 Toll Free FAX: 1 (800) 843‐70591125 Hurricane Shoals Road, Lawrenceville, GA 30043 E‐mail: [email protected]
GRADE
152 ± 18 150 ± 18
‐65 to 131 ‐65 to 131
G25
Caliper6.0 5.9
158 ± 19 154 +18/‐17.5
‐40 to 50 ‐40 to 50
www.rei.ricoh.com
‐54 to 55 ‐54 to 5597 ± 12 95 ± 11
Specifications may change without notice.Sensitivity curves are for reference only.
08/31/2012 ‐ Rev. A
G12L‐40 to 122 ‐40 to 122
Dynamic Sensitivity
0.00.20.40.60.81.01.21.41.6
7.79
3
11.6
89
15.5
85
19.4
82
23.3
78
27.2
74
31.1
71
35.0
67
38.9
64
42.8
60
46.7
56
Heat Energy (mJ/mm2)
Opt
ical
Den
sity
Static Sensitivity
0.0
0.2
0.4
0.60.8
1.0
1.2
1.4
1.660 80 100
120
140
160
180
200
Temperature (°C)
Opt
ical
Den
sity
150PRxPAPEL TERMICO DIRECTO
CARACTERISTICAS
Stock de etiquetas especialmente recubiertos con durabilidad de la imagenJabón, loción, y resistente a desinfectante de manos Media ‐ alta sensibilidad
AREAS DE APLICACION
Hospital / Prescripción
PROPIEDADES DEL PAPELTEMA UNIDAD
lbs (24x36x500 Hojas)g/m²milµm
Imagen de ColorImagen de Densidad (ODU) Mínimo
MD gf MínimoCD gf MínimoMD kgf/15mm MínimoCD kgf/15mm MínimoMD g‐cm MínimoCD g‐cm Mínimo
Temperatura de la activacíon inicial (O.D.=0.2) °F / °CTemperatura de activacíon efectiva (O.D.=0.8) °F / °C
PROPIEDADES DE CONSERVACIONTEMA ESPECIFICACIONES
Imagen 1.10 MínimoFondo 0.15 MáximoImagen 1.10 MínimoFondo 0.15 MáximoImagen 1.10 MínimoFondo 0.30 MáximoImagen 1.10 MínimoFondo 0.15 Máximo
CERTIFICADOS / REGULACIONES / DIRECTIVAS
Libre de BPA RoHS ISO 9001 REACHIndirecto en contacto con alimetos WEEE ISO 14001
RICOH Electronics, Inc. Servicio al cliente: 1 (800) 843‐70582320 Red Hill Avenue, Santa Ana, CA 92705 FAX gratuito: 1 (800) 843‐70591125 Hurricane Shoals Road, Lawrenceville, GA 30043 E‐mail: [email protected]
Procesamiento de carne Etiquetas de escala de peso
3.0
Resistencia al Desgarro 30 TAPPI T‐41435
Negro Comprobar de forma visual1.25
08/31/2012 ‐ Rev. A
40° C, 90% R.H., 24 HorasX‐Rite (ODU)
Resistencia al calor80° C, en Seco, 1 Hora
X‐Rite(ODU)
Resistencia a la luz5,000 lx, 100 Horas
X‐Rite (ODU)
METODO DE PRUEBA
Resistencia al aceite40° C, en Seco, 15 Horas
X‐Rite (ODU)
Resistencia a la tracción 5.4 TAPPI T‐4942.7
Rigidez TAPPI T‐4892.5
X‐Rite Densitómetro
Calibre 3.3 TAPPI T‐41184 ± 9
METODO DE PRUEBA
Base de Peso 47.3 ± 4.9 TAPPI T‐41077 ± 8
ESPECIFICACIONES
212 / 100239 / 115
Resistencia a la humedad
Las especificaciones pueden cambiar sin previo aviso.
www.rei.ricoh.com
150PRx ‐ PRODUCTO LAMINADOUNIDAD
Aplicación °F Temperatura °C Servicio °F Temperatura °C Base de Peso libras (24 x 36 x 500) g/m²
µmmil
Forro: 40 libras SC White KraftCalibre: 2.5 Mils ± 10% (64 ± 8µm)Opacidad: 65% Máximo (Photovolt)Condiciones de Almacenamiento: Por debajo 95°F (35°C) y menos del 85% de humidad relativa en un almacén, evitando la luz
RICOH Electronics, Inc. Servicio al cliente: 1 (800) 843‐70582320 Red Hill Avenue, Santa Ana, CA 92705 FAX gratuito: 1 (800) 843‐70591125 Hurricane Shoals Road, Lawrenceville, GA 30043 E‐mail: [email protected]
Las especificaciones pueden cambiar sin previo aviso.
www.rei.ricoh.com 08/31/2012 ‐ Rev. A
directa del sol.
152 ± 18 150 ± 18
Curvas de sensibilidad son sólo para referencia.
97 ± 12 95 ± 11158 ± 19 154 +18/‐17.5
‐65 a 131 ‐65 a 131‐54 a 55 ‐54 a 55
‐40 a 122‐40 a 50 ‐40 a 50
GRAD0 G25 G12L
Calibre6.0 5.9
‐40 a 122
Sensibilidad Dinámica
0.00.20.40.60.81.01.21.41.6
7.79
3
11.6
89
15.5
85
19.4
82
23.3
78
27.2
74
31.1
71
35.0
67
38.9
64
42.8
60
46.7
56
Energía del Calor (mJ/mm2)
Den
sida
d O
ptic
a
Sensibilidad Estática
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.660 80 100
120
140
160
180
200
Temperatura (°C)
Den
sida
d op
tica
140LDSDIRECT THERMAL FILM
FEATURES
High sensitivity polypropylene Durable base filmThinner than 140LES
APPLICATION AREAS
Laboratory Labels Wristbands
PAPER PROPERTIESITEM UNIT
lbs (24x36x500 Sheets)g/m²milµm
Image ColorImage Density (ODU) Minimum
MD kgf/mm2 MinimumCD kgf/mm2 MinimumMD g‐cm MinimumCD g‐cm Minimum
Initial Activation Temp. (O.D.=0.2) °F / °CEffective Activation Temp. (O.D.=0.8) °F / °C
PRESERVATION PROPERTIESITEM SPECIFICATION
Image 1.20 MinimumBackground 0.15 MaximumImage 1.20 MinimumBackground 0.15 MaximumImage 1.20 MinimumBackground 0.20 MaximumImage 1.00 MinimumBackground 0.12 Maximum
CERTIFICATES / REGULATIONS / DIRECTIVES
BPA Free RoHS ISO 9001 REACHIndirect Food Contact WEEE ISO 14001
RICOH Electronics, Inc. Customer Service: 1 (800) 843‐70582320 Red Hill Avenue, Santa Ana, CA 92705 Toll Free FAX: 1 (800) 843‐70591125 Hurricane Shoals Road, Lawrenceville, GA 30043 E‐mail: [email protected]
Stiffness
Tensile Strength 9.015.0
0.18
TEST METHOD33.2 ± 4.9
SPECIFICATION
54 ± 8TAPPI T‐410Basis Weight
1.30
2.768 ± 9Black
Caliper TAPPI T‐411
ASTM D‐882
Visual CheckX‐Rite Densitometer
239 / 115
0.10
212 / 100
TAPPI T‐489
TEST METHOD
Oil Resistance40° C, Dry, 15 Hours
X‐Rite (ODU)
Moisture Resistance
Heat Resistance
Water Resistance
40° C, 90% R.H., 24 HoursX‐Rite (ODU)
70° C, Dry, 24 HoursX‐Rite (ODU)
Water Immersion, 15 HoursX‐Rite (ODU)
Produce LabelsShelf Price Tags
09/25/2012 ‐ Rev. B
Specifications may change without notice.
www.rei.ricoh.com
140LDS ‐ LAMINATED PRODUCTUNIT
Application °F Temperature °C Service °F Temperature °C Basis Weight lbs (24 x 36 x 500) g/m²
µmmil
Liner: 40lbs SC White KraftCaliper: 2.5 Mils ± 10% (64 ± 8µm)Opacity: 65% Maximum (Photovolt)Storage Condition: Below 95°F (35°C) and less than 85% R.H. in a warehouse, avoiding direct sunlight.
RICOH Electronics, Inc. Customer Service: 1 (800) 843‐70582320 Red Hill Avenue, Santa Ana, CA 92705 Toll Free FAX: 1 (800) 843‐70591125 Hurricane Shoals Road, Lawrenceville, GA 30043 E‐mail: [email protected]
‐20 to 120 ‐65 to 131
137 ± 18 136 ± 19
Caliper5.5
‐12 to 49 ‐40 to 50
www.rei.ricoh.com
‐29 to 49 ‐54 to 5584 ± 11 83 ± 12
Specifications may change without notice.Sensitivity curves are for reference only.
139 ± 22 140 ± 225.5
GRADE G8
09/25/2012 ‐ Rev. B
G1210 to 120 ‐40 to 122
Dynamic Sensitivity
0.00.20.40.60.81.01.21.41.6
7.79
3
11.6
89
15.5
85
19.4
82
23.3
78
27.2
74
31.1
71
35.0
67
38.9
64
42.8
60
46.7
56
Heat Energy (mJ/mm2)
Opt
ical
Den
sity
Static Sensitivity
0.00.2
0.40.60.8
1.01.2
1.41.6
60 80 100
120
140
160
180
200
Temperature (°C)
Opt
ical
Den
sity
140LDSSINTETICO TERMICO DIRECTO
CARACTERISTICAS
Alta sensibilidad polipropileno Sintetica base durableMás delgado que 140LES
AREAS DE APLICACION
Estante Etiquetas de Precio Etiquetas de Laboratorio La Pulsera
PROPIEDADES DEL PAPELTEMA UNIDAD
lbs (24x36x500 Hojas)g/m²milµm
Imagen de ColorImagen de Densidad (ODU) Mínimo
MD kgf/mm2 MinimumCD kgf/mm2 MinimumMD g‐cm MínimoCD g‐cm Mínimo
Temperatura de la activacíon inicial (O.D.=0.2) °F / °CTemperatura de activacíon efectiva (O.D.=0.8) °F / °C
PROPIEDADES DE CONSERVACIONTEMA ESPECIFICACIONES
Imagen 1.20 MínimoFondo 0.15 MáximoImagen 1.20 MínimoFondo 0.15 MáximoImagen 1.20 MínimoFondo 0.20 MáximoImagen 1.00 MínimoFondo 0.12 Máximo
CERTIFICADOS / REGULACIONES / DIRECTIVAS
Libre de BPA RoHS ISO 9001 REACHIndirecto en contacto con alimetos WEEE ISO 14001
RICOH Electronics, Inc. Servicio al cliente: 1 (800) 843‐70582320 Red Hill Avenue, Santa Ana, CA 92705 FAX gratuito: 1 (800) 843‐70591125 Hurricane Shoals Road, Lawrenceville, GA 30043 E‐mail: [email protected]
Resistencia a el aguaInmersión en agua, 15 Horas
X‐Rite (ODU)
Las especificaciones pueden cambiar sin previo aviso.
www.rei.ricoh.com 09/25/2012 ‐ Rev. B
Resistencia a la humedad40° C, 90% R.H., 24 Horas
X‐Rite (ODU)
Resistencia al calor70° C, en Seco, 24 Horas
X‐Rite(ODU)
239 / 115
METODO DE PRUEBA
Resistencia al aceite40° C, en Seco, 15 Horas
X‐Rite (ODU)
0.10
212 / 100
Resistencia a la tracción 9.0 ASTM D‐88215.0
Resistencia a la tracción TAPPI T‐4890.18
Negro Comprobar de forma visual1.30 X‐Rite Densitómetro
Calibre 2.7 TAPPI T‐41168 ± 9
Etiquetas de Frutas y Verduras
ESPECIFICACIONES METODO DE PRUEBA
Base de Peso 33.2 ± 4.9 TAPPI T‐41054 ± 8
140LDS ‐ PRODUCTO LAMINADOUNIDAD
Aplicación °F Temperatura °C Servicio °F Temperatura °C Base de Peso libras (24 x 36 x 500) g/m²
µmmil
Forro: 40 libras SC White KraftCalibre: 2.5 Mils ± 10% (64 ± 8µm)Opacidad: 65% Máximo (Photovolt)Condiciones de Almacenamiento: Por debajo 95°F (35°C) y menos del 85% de humidad relativa en un almacén, evitando la luz
RICOH Electronics, Inc. Servicio al cliente: 1 (800) 843‐70582320 Red Hill Avenue, Santa Ana, CA 92705 FAX gratuito: 1 (800) 843‐70591125 Hurricane Shoals Road, Lawrenceville, GA 30043 E‐mail: [email protected]
‐29 a 49
Calibre5.5 5.5
‐54 a 55‐20 a 120 ‐65 a 131
Curvas de sensibilidad son sólo para referencia.Las especificaciones pueden cambiar sin previo aviso.
www.rei.ricoh.com 09/25/2012 ‐ Rev. B
directa del sol.
84 ± 11 83 ± 12137 ± 18 136 ± 19139 ± 22 140 ± 22
10 a 120 ‐40 a 122‐12 a 49 ‐40 a 50
GRAD0 G8 G12
Sensibilidad Dinámica
0.00.20.40.60.81.01.21.41.6
7.79
3
11.6
89
15.5
85
19.4
82
23.3
78
27.2
74
31.1
71
35.0
67
38.9
64
42.8
60
46.7
56
Energía del Calor (mJ/mm2)
Den
sida
d O
ptic
a
Sensibilidad Estática
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.660 80 100
120
140
160
180
200
Temperatura (°C)
Den
sida
d op
tica
140LESDIRECT THERMAL FILM
FEATURES
High sensitivity polypropylene Durable base filmTear resistant
APPLICATION AREAS
Laboratory Labels Wristbands
PAPER PROPERTIESITEM UNIT
lbs (24x36x500 Sheets)g/m²milµm
Image ColorImage Density (ODU) Minimum
MD kgf/15mm MinimumCD kgf/15mm MinimumMD g‐cm MinimumCD g‐cm Minimum
Initial Activation Temp. (O.D.=0.2) °F / °CEffective Activation Temp. (O.D.=0.8) °F / °C
PRESERVATION PROPERTIESITEM SPECIFICATION
Image 1.20 MinimumBackground 0.15 MaximumImage 1.20 MinimumBackground 0.15 MaximumImage 1.20 MinimumBackground 0.20 MaximumImage 1.00 MinimumBackground 0.12 Maximum
CERTIFICATES / REGULATIONS / DIRECTIVES
BPA Free RoHS ISO 9001 REACHIndirect Food Contact WEEE ISO 14001
RICOH Electronics, Inc. Customer Service: 1 (800) 843‐70582320 Red Hill Avenue, Santa Ana, CA 92705 Toll Free FAX: 1 (800) 843‐70591125 Hurricane Shoals Road, Lawrenceville, GA 30043 E‐mail: [email protected]
TAPPI T‐4891.2
Shelf Price TagsAirline Baggage Tags
0.8
TAPPI T‐411
TAPPI T‐494
Visual CheckX‐Rite Densitometer
09/25/2012 ‐ Rev. B
Specifications may change without notice.
www.rei.ricoh.com
Moisture Resistance40° C, 90% R.H., 24 Hours
X‐Rite (ODU)70° C, Dry, 24 Hours
X‐Rite (ODU)Water Immersion, 15 Hours
X‐Rite (ODU)
40° C, Dry, 15 HoursX‐Rite (ODU)
221 / 105203 / 95
TEST METHOD
Basis Weight
1.30
4.1105 ± 11Black
Caliper
TEST METHOD52.4 ± 4.9
SPECIFICATION
85 ± 8TAPPI T‐410
Heat Resistance
Water Resistance
Tensile Strength 15.025.0
Oil Resistance
Stiffness
140LES ‐ LAMINATED PRODUCT
UNIT Application °F Temperature °C Service °F Temperature °C Basis Weight lbs (24 x 36 x 500) g/m²
µmmil
Liner: 40lbs SC White KraftCaliper: 2.5 Mils ± 10% (64 ± 8µm)Opacity: 65% Maximum (Photovolt)Storage Condition: Below 95°F (35°C) and less than 85% R.H. in a warehouse, avoiding direct sunlight.
RICOH Electronics, Inc. Customer Service: 1 (800) 843‐70582320 Red Hill Avenue, Santa Ana, CA 92705 Toll Free FAX: 1 (800) 843‐70591125 Hurricane Shoals Road, Lawrenceville, GA 30043 E‐mail: [email protected]
Caliper178 ± 22 179 ± 22 179 ± 21
7.0 7.0 7.0
09/25/2012 ‐ Rev. Bwww.rei.ricoh.com
GRADE
‐12 to 49 ‐40 to 50 ‐2 to 50
Specifications may change without notice.Sensitivity curves are for reference only.
G8 G12 G2210 to 120 ‐40 to 122 28 to 122
‐20 to 120 ‐65 to 131 ‐40 to 122‐29 to 49 ‐54 to 55 ‐40 to 50101 ± 11 105 ± 11 105 ± 11164 ± 18 171 ± 18 170 ± 18
Dynamic Sensitivity
0.00.20.40.60.81.01.21.41.61.8
7.79
3
11.6
89
15.5
85
19.4
82
23.3
78
27.2
74
31.1
71
35.0
67
38.9
64
42.8
60
46.7
56
Heat Energy (mJ/mm2)
Opt
ical
Den
sity
Static Sensitivity
0.00.2
0.40.60.8
1.01.2
1.41.6
60 80 100
120
140
160
180
200
Temperature (°C)
Opt
ical
Den
sity
140LESSINTETICO TERMICO DIRECTO
CARACTERISTICAS
Alta sensibilidad polipropileno Sintetica base durableResistente al desgaste
AREAS DE APLICACION
Etiquetas de equipaje de la aerolínea Etiquetas de Laboratorio Pulseras
PROPIEDADES DEL PAPELTEMA UNIDAD
lbs (24x36x500 Hojas)g/m²milµm
Imagen de ColorImagen de Densidad (ODU) Mínimo
MD kgf/15mm MínimoCD kgf/15mm MínimoMD g‐c MínimoCD g‐c Mínimo
Temperatura de la activacíon inicial (O.D.=0.2) °F / °CTemperatura de activacíon efectiva (O.D.=0.8) °F / °C
PROPIEDADES DE CONSERVACIONTEMA ESPECIFICACIONES
Imagen 1.20 MínimoFondo 0.15 MáximoImagen 1.20 MínimoFondo 0.15 MáximoImagen 1.20 MínimoFondo 0.20 MáximoImagen 1.00 MínimoFondo 0.12 Máximo
CERTIFICADOS / REGULACIONES / DIRECTIVAS
Libre de BPA RoHS ISO 9001 REACHIndirecto en contacto con alimetos WEEE ISO 14001
RICOH Electronics, Inc. Servicio al cliente: 1 (800) 843‐70582320 Red Hill Avenue, Santa Ana, CA 92705 FAX gratuito: 1 (800) 843‐70591125 Hurricane Shoals Road, Lawrenceville, GA 30043 E‐mail: [email protected]
Las especificaciones pueden cambiar sin previo aviso.
www.rei.ricoh.com 09/25/2012 ‐ Rev. B
Resistencia al calor70° C, en Seco, 24 Horas
X‐Rite(ODU)
Resistencia a el aguaInmersión en agua, 15 Horas
X‐Rite (ODU)
METODO DE PRUEBA
Resistencia al aceite40° C, en Seco, 15 Horas
X‐Rite (ODU)
Resistencia a la humedad40° C, 90% R.H., 24 Horas
X‐Rite (ODU)
203 / 95221 / 105
15.025.0
Rigidez TAPPI T‐4891.2
Resistencia a la tracción TAPPI T‐494
0.8
Negro Comprobar de forma visual1.30 X‐Rite Densitómetro
Calibre 4.1 TAPPI T‐411105 ± 11
Estante Etiquetas de Precio
ESPECIFICACIONES METODO DE PRUEBA
Base de Peso 52.4 ± 4.9 TAPPI T‐41085 ± 8
140LES ‐ PRODUCTO LAMINADOUNIDAD
Aplicación °F Temperatura °C Servicio °F Temperatura °C Base de Peso libras (24 x 36 x 500) g/m²
µmmil
Forro: 40 libras SC White KraftCalibre: 2.5 Mils ± 10% (64 ± 8µm)Opacidad: 65% Máximo (Photovolt)Condiciones de Almacenamiento: Por debajo 95°F (35°C) y menos del 85% de humidad relativa en un almacén, evitando la luz
RICOH Electronics, Inc. Servicio al cliente: 1 (800) 843‐70582320 Red Hill Avenue, Santa Ana, CA 92705 FAX gratuito: 1 (800) 843‐70591125 Hurricane Shoals Road, Lawrenceville, GA 30043 E‐mail: [email protected]
‐65 a 131 ‐40 a 122
171 ± 18 170 ± 18
Las especificaciones pueden cambiar sin previo aviso.
www.rei.ricoh.com 09/25/2012 ‐ Rev. B
directa del sol.
Curvas de sensibilidad son sólo para referencia.
101 ± 11 105 ± 11 105 ± 11164 ± 18
‐29 a 49 ‐54 a 55 ‐40 a 50
10 a 120 ‐40 a 122 28 a 122‐12 a 49 ‐40 a 50 ‐2 a 50‐20 a 120
GRAD0 G8 G12 G22
Calibre7.0 7.0 7.0
178 ± 22 179 ± 22 179 ± 21
Sensibilidad Dinámica
0.00.20.40.60.81.01.21.41.61.8
7.79
3
11.6
89
15.5
85
19.4
82
23.3
78
27.2
74
31.1
71
35.0
67
38.9
64
42.8
60
46.7
56
Energía del Calor (mJ/mm2)
Den
sida
d O
ptic
a
Sensibilidad Estática
0.00.2
0.40.60.8
1.01.2
1.41.6
60 80 100
120
140
160
180
200
Temperatura (°C)
Den
sida
d O
ptic
a
Ricoh Electronics, Inc.2320 Red Hill AvenueSanta Ana, CA. 92705
Toll Free No. 1 (800) 843-7058Toll Free Fax 1 (888) 843-7059e-mail: [email protected]
THERMAL TRANSFER RIBBONS
Product Performance Characteristics Printer
B110A
Specially designed for printing on a wide variety of receiving materials (paper, coated paper, fi lm, etc.), at low to high printing speeds. The most common wax-resin based ribbon in the market today. It provides a strong environmental resistance against abrasion and chemicals. Special back
coating and ink formula minimizes print head problems.Also available in Blue (B210A) and Red (B310A).
Flat Head
B120E Provides the same printing qualities as B110A. Distinctively created for low-smoothness paper.
Near-Edge
B130ED A high image density ribbon designed to print on polypropylene and various packaging fi lms at 20 to 24 ips. For date coding applications.
Near-Edge
Product Performance Characteristics Printer
B110C A resin based ribbon engineered to print on fi lm and synthetic materials. It is highly resistant to solvents, heat, scratch and smear.
Flat Head
B110CR Specifi cally produced for electronics, automotive and medical industries. It has unparalleled resistance to heat, abrasions and solvents.
Flat Head
B110CUA special designed ribbon with ultra solvent resistance to chemicals, such
as: acetone, ethanol, toluene, MEX, xylene, thinner, etc. Superb smear and scratch durability that enables it to function in healthcare, specimen, biosci-
ence and industrial applications.
Flat Head
B120HSFor use on polypropylene, such as car battery applications, with conven-
tional print heads at up to 10 ips. It has outstanding scratch, chemical and heat resistance.
Flat Head
Product Performance Characteristics Printer
D110AA resin based ribbon designed to print on nylon, polyester and acetate. It
provides a durable printing image that withstands dry cleaning, water/stone/chemical washing and has superior ironing resistance.
Also available in Blue (D210A) and Red (D310A).
Near-Edge&
Flat Head
All data is for reference only. It is the responsibility of the end user to test all thermal transfer ribbon properties prior to fi nal use.
Wax
-Res
in R
ibbo
nR
esin
Rib
bon
Res
in fo
r Te
xtile
D110CA resin based ribbon fashioned for the garment industry. For textile printing
applications on: nylon, acetate, satin and many other materials. Its out-standing durability (higher than D110A) can withstand washing, steam/dry
cleaning and has superior ironing resistance.
Flat Head
L ig h t
w e ig h t
c o a te d
p a p e r
C o a te d
p a p e r
G lo s s
p a p e r
P E
(P olyethy-lene)
P P
(P olypro-pylene)
P V C
(P olyvinyl- chloride)
P E T
(P oly- ester)
P I
(P oly-amide)
N y lo n P o ly - e s te r A c e ta te
B 1 1 0 A
B 1 2 0 E
B 1 3 0 E D
L ig h t
w e ig h t
c o a te d
p a p e r
C o a te d
p a p e r
G lo s s
p a p e r
P E
(P olyethy-lene)
P P
(P olypro-pylene)
P V C
(P olyvinyl- chloride)
P E T
(P oly- ester)
P I
(P oly-amide)
N y lo n P o ly - e s te r A c e ta te
B 1 1 0 C
B 1 1 0 C R
B 1 1 0 C U
B 1 2 0 H S
L ig h t
w e ig h t
c o a te d
p a p e r
C o a te d
p a p e r
G lo s s
p a p e r
P E
(P olyethy-lene)
P P
(P olypro-pylene)
P V C
(P olyvinyl- chloride)
P E T
(P oly- ester)
P I
(P oly-amide)
N y lo n P o ly - e s te r A c e ta te
D 1 1 0 A
D 1 1 0 C
F ilm B a s e T e x tile
P r o d u c t
N a m e
F ilm B a s e T e x tile
T e x tileF ilm B a s e
P r o d u c t
N a m e
P r o d u c t
N a m e
* Please note: some receiving materials may not accept printing by these Thermal Trasnfer Ribbons (TTR).
* Specific treatments made on receiving materials may enhance suitability for TTR prining. (For example, synthetic film made of PP, with suitable coating, for TTR printing will have the best printed images with B110C, B110CR & D110C.
e-mail: [email protected]: www.rei.ricoh.com
N O T R e c o m m e n d e d
E x c e lle n t - T e s t in a c tu a l a p p lic a tio n
F a ir - T e s t fo r s u ita b ility
Wa
x-R
esi
n R
ibb
on
Re
sin
Rib
bo
nR
esi
n f
or
Tex
tile
(For Flat Head Printers)RIBBON PROPERTY
• Base Material Polyester film• Base Thickness (µm)
INK PROPERTY• Ink Color• Ink Transparency
PRINTING PROPERTY• Image Density (check w/ Macbeth RD-914)• ANSI grade Min. Vertical bar ANSI 2.0 C
IMAGE PROPERTY• Scratch resistance (times)• Light resistance Min. ANSI 2.0 C• Water resistance Min. ANSI 2.0 C
USAGE ENVIRONMENT: 5 ~ 35°C (41 ~ 95°F), 30 ~ 85%RHSTORAGE CONDITIONS: Keep indoors, away from high temperatures, high humidity and
direct sunlight. Keep master rolls hanging horizontally.GUARANTEE PERIOD: 4 years after manufacturing.FEATURES• All purpose Was/Resin TTR • Reliable, sharp-edge print quality• Prints on wide variety of media • Maximizes barcode scanning rates• High resistance to smearing & chemicals • Minimizes static electricity & ink flaking problems
For Flat type thermal print head For Near edge type thermal print head B110A is recommended B120E is recommended
NORMAL TYPE THERMAL PRINT HEAD NEAR EDGE TYPE THERMAL PRINT HEAD
Ribbon Selection Tips
B110A
Min. 100
Min. 1.2 Black
4.5 ± 0.4
Min. 1.25
* All tests specifications are based on Ricoh's standard test methods.
WAX-RESINSMEARLESS
THERMAL TRANSFER RIBBONPRODUCT INFORMATION
Ink from Ribbon has adequate cooling time before ribbon is peeled from substrate.
Near-Edge Head technology requires a different type of ribbon that can transfer ink before cooling down.
The above data represents product averages, allowing for industry accepted variances.These products should be tested in the end-use conditions to insure that they meet the
requirements of the specific application. Specifications may change without notice.
HEAT ELEMENT
THERMAL TRANSFER RIBBON
20-30 mm for cool down
45 DEGREE 90 DEGREE
0.22 mm too short for cool down
Ricoh Electronics, Inc.2320 Red Hill Ave., Santa Ana, CA 927051125 Hurricane Shoals Rd., Lawrenceville, GA 30043Customer Service 1 (800) 843-7058Toll-Free Fax 1 (888) 843-7059e-mail: [email protected]://www.rei.ricoh.com
B120E (For Near Edge Head Printers)
RIBBON PROPERTY• Base Material Polyester film• Base Thickness (µm) 4.5 ± 0.4
INK PROPERTY• Ink Color Black• Ink Transparency Min. 0.65
IMAGE PROPERTY• Image Density Min. 1.5• Image Resolution Min. Horizontal bar ANSI B
IMAGE DURABILITY• Friction resistance Min. Vertical bar ANSI A• Scratch resistance (times)• Light resistance Min. Vertical bar ANSI A• Water resistance Min. Vertical bar ANSI A• Ironing resistance
USAGE ENVIRONMENT: 5 ~ 40°C (41 ~ 104°F), 10 ~ 95%RHSTORAGE CONDITIONS: Keep indoors, away from high temperatures, high humidity and
direct sunlight. Keep master rolls hanging horizontally.GUARANTEE PERIOD: 4 years after manufacturing.
* Finished rolls: -20-40°C, 10-90%RH* Master rolls: 35°C, 85% RH or less
GUARANTEE PERIOD:* Finished rolls: 4 years after manufacturing* Master rolls : 1 year after coating
FEATURES:• All purpose Wax/Resin TTR • Reliable, sharp-edge print quality• Prints on wide variety of media • Maximizes barcode scanning rates• High resistance to smearing & chemicals • Minimizes static electricity & ink flaking problems• Excellent at high-speed printing as high as 10 inches/sec.
No image disorder or transfer of ink
Min. 200 (cast coated paper, white PET)
* All tests specifications are based on Ricoh's standard test methods.
WAX-RESINSMEARLESS
THERMAL TRANSFER RIBBONPRODUCT INFORMATION
The above data represents product averages, allowing for industry accepted variances.These products should be tested in the end-use conditions to insure that they meet the
requirements of the specific application. Specifications may change without notice.
Ricoh Electronics, Inc.2320 Red Hill Ave., Santa Ana, CA 927051125 Hurricane Shoals Rd., Lawrenceville, GA 30043Customer Service 1 (800) 843-7058Toll-Free Fax 1 (888) 843-7059e-mail: [email protected]://www.rei.ricoh.com
B130ED (For Near-Edge Head Printers)
RIBBON PROPERTY• Base Material Polyester film• Base Thickness (µm) 4.5 ± 0.4
INK PROPERTY• Ink Color Black
IMAGE PROPERTY• Image Density (transmission) Min. 1.2• Receiving materials (packaging film)
IMAGE DURABILITY• Friction resistance• Scratch resistance (times) Min. 500• Light resistance • Water resistance
USAGE ENVIRONMENT: 10 ~ 35°C (50 ~ 95°F), 10 ~ 95%RHSTORAGE CONDITIONS: Keep indoors, away from high temperatures, high humidity and
direct sunlight. Keep master rolls hanging horizontally.* Finished rolls: -20-40°C, 10-90%RH* Master rolls: 35°C, 85% RH or less
GUARANTEE PERIOD:* Finished rolls: 4 years after manufacturing* Master rolls : 1 year after coating
FEATURES:• Printing for various films, such as Polypropylene & Polyethylene• Super high-speed priting (up to 24 inches/sec.)• High image desity• For near-edge head printers
No image disorder
* All tests specifications are based on Ricoh's standard test methods.
OPP, PE, PET, Nylon
Readable
No image disorder
WAX-RESIN SMEARLESS
(For Date CodingApplications)
THERMAL TRANSFER RIBBONPRODUCT INFORMATION
The above data represents product averages, allowing for industry accepted variances.These products should be tested in the end-use conditions to insure that they meet the
requirements of the specific application. Specifications may change without notice.
Ricoh Electronics, Inc.2320 Red Hill Ave., Santa Ana, CA 927051125 Hurricane Shoals Rd., Lawrenceville, GA 30043Customer Service 1 (800) 843-7058Toll-Free Fax 1 (888) 843-7059e-mail: [email protected]://www.rei.ricoh.com
B110C (For Flat Head Printers)
RIBBON PROPERTY• Base Material• Base Thickness (µm)
INK PROPERTY• Ink Color• Transmission Density
IMAGE PROPERTY• Scratch resistance (times)• Light resistance (ANSI)• Water resistance (ANSI)• Chemical resistance (times)
EthanolKeroseneEngine oilGasolineHexane
USAGE ENVIRONMENT: 5 ~ 35°C (41 ~ 95°F), 30 ~ 85%RHSTORAGE CONDITIONS: Keep indoors, away from high temperatures, high humidity and
direct sunlight. Keep master rolls hanging horizontally.GUARANTEE PERIOD:* Finished rolls: 4 years after manufacturing* Master rolls : 1 year after coating
FEATURES:• High sensitivity for high-speed printing (~4 inches/sec.) with high printing quality assured• Super smear resistance at temperatures up to 100°C (212°F)• Superior resistance to solvents (alcohol, petrol, kerosene, brake fluid, engine oil, car wax, etc.)• Special back coating for reliable and superior matching with thermal print head• UL recognized with various printers and films
* All tests specifications are based on Ricoh's standard test methods.
Min. 100
<White PET> <Silver PET> Min. 1000 Min. 2000
Min. 150
Min. 1500 Min. 2000
Min. 2000 Min. 2000 Min. 1000 Min. 160
Min. 3.5 A
Polyester film 4.5 ± 0.4
Black Min. 0.65
Min. 1850 Min. 3.5 A
THERMAL TRANSFER RIBBONPRODUCT INFORMATION
RESINSUPER
SMEARLESS
The above data represents product averages, allowing for industry accepted variances.These products should be tested in the end-use conditions to insure that they meet the
requirements of the specific application. Specifications may change without notice.
Ricoh Electronics, Inc.2320 Red Hill Ave., Santa Ana, CA 927051125 Hurricane Shoals Rd., Lawrenceville, GA 30043Customer Service 1 (800) 843-7058Toll-Free Fax 1 (888) 843-7059e-mail: [email protected]://www.rei.ricoh.com
B110CR (For Flat Head Printers)
RIBBON PROPERTY• Base Material Polyester film• Base Thickness (µm)
INK PROPERTY• Ink Color
IMAGE PROPERTY• Image Density• Image Resolution• Scratch resistance (times) • Chemical resistance • Ethanol, Methanol• IPA• Windshield Washer• Gasoline, Diesel Fuel, Gasohol• Engine Oil, Mission Fluid• Power Steering Fluid• Brake Fluid• Engine Coolant
USAGE ENVIRONMENT: 5 ~ 35°C (41 ~ 95°F), 30 ~ 85%RHSTORAGE CONDITIONS: Keep indoors, away from high temperatures, high humidity and
direct sunlight. Keep master rolls hanging horizontally.GUARANTEE PERIOD:* Finished rolls: 4 years after manufacturing* Master rolls : 1 year after coating
FEATURES:• Ideal for Automotive, Serial No. Plates, Circuit Board Labels and Pharmaceutical Applications• Produces very high resolution even when printing using a 600 dpi Thermal head• Excellent resistance to heat, chemicals, solvents and scratches• UL recognized with various printers and films
Excellent Excellent
* All tests specifications are based on Ricoh's standard test methods.
Excellent Excellent Excellent Excellent
4.5 ± 0.4
Excellent Excellent Excellent
Black
1.5 minimum
Excellent Excellent
THERMAL TRANSFER RIBBONPRODUCT INFORMATION
RESIN SUPER
SMEARLESS
Ricoh Electronics, Inc.2320 Red Hill Ave., Santa Ana, CA 927051125 Hurricane Shoals Rd., Lawrenceville, GA 30043Customer Service 1 (800) 843-7058Toll-Free Fax 1 (888) 843-7059e-mail: [email protected]://www.rei.ricoh.com
The above data represents product averages, allowing for industry accepted variances.These products should be tested in the end-use conditions to insure that they meet the
requirements of the specific application. Specifications may change without notice.
B110CU (For Flat Head Printers)
RIBBON PROPERTY• Base Material Polyester film• Base Thickness (µm)
INK PROPERTY• Ink Color
IMAGE PROPERTY• Image Density• Image Resolution Excellent• Scratch resistance (scratched x 100 by sharp edge at 40°) • Resistance to smear and heat (rubbed x 100 in 100°C)•
Ethanol, AcetoneIPAMEKThinnerXyleneBrake FluidWater
USAGE ENVIRONMENT: 5 ~ 35°C (41 ~ 95°F), 30 ~ 85%RHSTORAGE CONDITIONS: Keep indoors, away from high temperatures, high humidity and
direct sunlight. Keep master rolls hanging horizontally.GUARANTEE PERIOD:* Finished rolls: 4 years after manufacturing* Master rolls : 1 year after coating
FEATURES:• Ideal for Automotive, Serial No. Plates, Circuit Board Labels and Pharmaceutical Applications• Produces very high resolution even when printing using a 600 dpi Thermal head• Excellent resistance to heat, chemicals, solvents and scratches• UL recognized
4.5 ± 0.4
* All tests specifications are based on Ricoh's standard test methods.
Excellent Excellent
Black
Excellent Excellent Excellent
Excellent
Excellent Excellent Excellent
1.5 minimum
Chemical resistance (wiped x 100 with cotton cloth at 100gf/cm2) Excellent
THERMAL TRANSFER RIBBONPRODUCT INFORMATION
RESIN SUPER
SMEARLESS
Ricoh Electronics, Inc.2320 Red Hill Ave., Santa Ana, CA 927051125 Hurricane Shoals Rd., Lawrenceville, GA 30043Customer Service 1 (800) 843-7058Toll-Free Fax 1 (888) 843-7059e-mail: [email protected]://www.rei.ricoh.com
The above data represents product averages, allowing for industry accepted variances.These products should be tested in the end-use conditions to insure that they meet the
requirements of the specific application. Specifications may change without notice.
B120HS (For Flat Head Printers)
RIBBON PROPERTY• Base Material Polyester film• Base Thickness (µm)
INK PROPERTY• Ink Color Black• Ink Transparency Min. 1.2
IMAGE PROPERTY• Image Density Min. 1.5• Thermo Sensitivity Min. 0.38mj/dot • Image Resolution
IMAGE DURABILITY• Scratch resistance (times) Min. 25 • Oil resistance Min. ANSI 2.0 C• Water resistance Min. ANSI 2.0 C• Preservability in cold storage Min. ANSI 2.0 C
USAGE ENVIRONMENT: 5 ~ 35°C (41 ~ 95°F), 30 ~ 85%RHSTORAGE CONDITIONS: Keep indoors, away from high temperatures, high humidity and
direct sunlight. Keep master rolls hanging horizontally.GUARANTEE PERIOD:* Finished rolls: 4 years after manufacturing* Master rolls : 1 year after coating
FEATURES:• Excellent when printing on general wrapping polypropylene• Superior resistance to oils and water and preservability in cold storage environments• High sensitivity which can be used for high-speed printers• Excellent image quality
* All tests specifications are based on Ricoh's standard test methods.
4.5 ± 0.4
Readable without ink smearing
THERMAL TRANSFER RIBBONPRODUCT INFORMATION
RESINSPECIALTY
Ricoh Electronics, Inc.2320 Red Hill Ave., Santa Ana, CA 927051125 Hurricane Shoals Rd., Lawrenceville, GA 30043Customer Service 1 (800) 843-7058Toll-Free Fax 1 (888) 843-7059e-mail: [email protected]://www.rei.ricoh.com
The above data represents product averages, allowing for industry accepted variances.These products should be tested in the end-use conditions to insure that they meet the
requirements of the specific application. Specifications may change without notice.
D110ARIBBON PROPERTY
• Base Material Polyester film• Base Thickness (µm) 4.5 ± 0.4
INK PROPERTY• Ink Color Black• Ink transparency
IMAGE PROPERTY• Image Density: Min. 1.2 (nylon)
Min. 1.0 (acetate)• Image Resolution: Min. ANSI B
IMAGE DURABILITY• Ironing resistance: GD max. 0.07 (direct, covered with cloth) • Smear resistance (dry, wet): • Washing resistance (water): ID min. 1.0, min. ANSI B (nylon)
• Washing resistance (dry): ID min. 1.0, min ANSI B (nylon)
• Bleach resistance: ID min. 1.0, min ANSI B (nylon)
• Sweat resistance: ID min. 1.0, min. ANSI B (nylon)
USAGE ENVIRONMENT: 5 ~ 35°C (41 ~ 95°F), 30 ~ 85%RHSTORAGE CONDITIONS: Keep indoors, away from high temperatures, high humidity and
direct sunlight. Keep master rolls hanging horizontally.GUARANTEE PERIOD:* Finished rolls: 4 years after manufacturing* Master rolls : 1 year after coating
FEATURES:• Printable on receiving cloths (nylon, polyester and acetate) and films• Super smear resistance up to 150°C (302°F); no blurring of image occurs from ironing• Print images are highly durable against water and dry cleaning• Superior thermal head matching qualities using Ricoh's unique back-side coating
* All tests specifications are based on Ricoh's standard test methods.
* ID(GD): The differences in image (ground) density resulting from the "before test" and "after test".
ID min. 0.7 (acetate)
ID min. 0.6 (polyester) ID min. 0.7 (acetate)
ID min. 0.6 (polyester)
(For Flat Head & Near Edge Printers)
ID min. 0.8 (acetate)
ID min. 0.6 (polyester) ID min. 0.8 (acetate)
More than 0.65 ~ 1.65
Min. 0.8 (polyester)
ID min. 0.6 (polyester)
GD max. 0.07 (direct covered with cloth)
THERMAL TRANSFER RIBBONPRODUCT INFORMATION
SPECIALTY RESIN
(For Textile Applications)
Ricoh Electronics, Inc.2320 Red Hill Ave., Santa Ana, CA 927051125 Hurricane Shoals Rd., Lawrenceville, GA 30043Customer Service 1 (800) 843-7058Toll-Free Fax 1 (888) 843-7059e-mail: [email protected]://www.rei.ricoh.com
The above data represents product averages, allowing for industry accepted variances.These products should be tested in the end-use conditions to insure that they meet the
requirements of the specific application. Specifications may change without notice.
D210A (For Flat Head Printers)
RIBBON PROPERTY• Base Material Polyester film• Base Thickness (µm) 4.5 ± 0.4
INK PROPERTY• Ink Color Blue• Ink transparency
IMAGE PROPERTY• Image Density: Min. 1.3 (nylon)
Min. 0.9 (acetate)• Image Resolution: Min. ANSI C
IMAGE DURABILITY• Ironing resistance: * GD max. 0.07 (direct, covered with cloth) • Smear resistance (dry,wet): * GD max. 0.07 (direct, covered with cloth) • Washing resistance (water): * ID max. 0.20, covered cloth * GD max. 0.07 (nylon)
* ID max. 0.25, covered cloth * GD max. 0.07 (polyester) * ID max. 0.20, covered cloth * GD max. 0.07 (acetate)
• Washing resistance (dry): * ID max. 0.25, covered cloth * GD max. 0.07 (nylon) * ID max. 0.15, covered cloth * GD max. 0.07 (polyester) * ID max. 0.15, covered cloth * GD max. 0.07 (acetate)
• Bleach resistance: * ID max. 0.05, covered cloth * GD max. 0.07 (nylon) * ID max. 0.10, covered cloth * GD max. 0.07 (polyester) * ID max. 0.10, covered cloth * GD max. 0.07 (acetate)
• Sweat resistance: * ID max. 0.05, covered cloth * GD max. 0.07 (nylon) * ID max. 0.10, covered cloth * GD max. 0.07 (polyester) * ID max. 0.10, covered cloth * GD max. 0.07 (acetate)
USAGE ENVIRONMENT: 5 ~ 35°C (41 ~ 95°F), 30 ~ 85%RHSTORAGE CONDITIONS: Keep indoors, away from high temperatures, high humidity and
direct sunlight. Keep master rolls hanging horizontally.GUARANTEE PERIOD:* Finished rolls: 4 years after manufacturing
FEATURES:• Printable on receiving cloths (nylon, polyester, acetate) and films• Super smear resistance up to 150°C (302°F); no blurring of image occurs from ironing• Print images are highly durable against water and dry cleaning• Superior thermal head matching qualities using Ricoh's unique back-side coating• Blue color
* All tests specifications are based on Ricoh's standard test methods. * ID(GD): The difference of image (ground) density between "before test" and "after test".
Min. 0.65
Min.1.0 (polyester)
THERMAL TRANSFER RIBBONPRODUCT INFORMATION
RESIN SUPER SMEARLESS
(For Textile Applications)
Ricoh Electronics, Inc.2320 Red Hill Ave., Santa Ana, CA 927051125 Hurricane Shoals Rd., Lawrenceville, GA 30043Customer Service 1 (800) 843-7058Toll-Free Fax 1 (888) 843-7059e-mail: [email protected]://www.rei.ricoh.com
The above data represents product averages, allowing for industry accepted variances.These products should be tested in the end-use conditions to insure that they meet the
requirements of the specific application. Specifications may change without notice.
D310A (For Flat Head Printers)
RIBBON PROPERTY• Base Material Polyester film• Base Thickness (µm) 4.5 ± 0.4
INK PROPERTY• Ink Color Red• Ink transparency
IMAGE PROPERTY• Image Density: Min. 1.2 (nylon)
Min. 0.9 (acetate)IMAGE DURABILITY
• Ironing resistance: * GD max. 0.07 (direct, covered with cloth) • Smear resistance (dry,wet): * GD max. 0.07 (direct, covered with cloth) • Washing resistance (water): * ID max. 0.20, covered cloth * GD max. 0.07 (nylon)
* ID max. 0.25, covered cloth * GD max. 0.07 (polyester) * ID max. 0.20, covered cloth * GD max. 0.07 (acetate)
• Washing resistance (dry): * ID max. 0.25, covered cloth * GD max. 0.07 (nylon) * ID max. 0.15, covered cloth * GD max. 0.07 (polyester) * ID max. 0.15, covered cloth * GD max. 0.07 (acetate)
• Bleach resistance: * ID max. 0.05, covered cloth * GD max. 0.07 (nylon) * ID max. 0.10, covered cloth * GD max. 0.07 (polyester) * ID max. 0.10, covered cloth * GD max. 0.07 (acetate)
• Sweat resistance: * ID max. 0.05, covered cloth * GD max. 0.07 (nylon) * ID max. 0.10, covered cloth * GD max. 0.07 (polyester) * ID max. 0.10, covered cloth * GD max. 0.07 (acetate)
USAGE ENVIRONMENT: 5 ~ 35°C (41 ~ 95°F), 30 ~ 85%RHSTORAGE CONDITIONS: Keep indoors, away from high temperatures, high humidity and
direct sunlight. Keep master rolls hanging horizontally.GUARANTEE PERIOD:* Finished rolls: 4 years after manufacturing
FEATURES:• Printable on receiving cloths (nylon, polyester, acetate) and films• Super smear resistance up to 150°C (302°F); no blurring of image occurs from ironing• Print images are highly durable against water and dry cleaning• Superior thermal head matching qualities using Ricoh's unique back-side coating• Red color
* ID(GD): The difference of image (ground) density between "before test" and "after test".* All tests specifications are based on Ricoh's standard test methods.
Min. 0.65
Min.0.9 (polyester)
THERMAL TRANSFER RIBBONPRODUCT INFORMATION
RESIN SUPER SMEARLESS
(For Textile Applications)
Ricoh Electronics, Inc.2320 Red Hill Ave., Santa Ana, CA 927051125 Hurricane Shoals Rd., Lawrenceville, GA 30043Customer Service 1 (800) 843-7058Toll-Free Fax 1 (888) 843-7059e-mail: [email protected]://www.rei.ricoh.com
The above data represents product averages, allowing for industry accepted variances.These products should be tested in the end-use conditions to insure that they meet the
requirements of the specific application. Specifications may change without notice.
D110C(For Flat Head Printers)
RIBBON PROPERTY• Base Material Polyester film• Base Thickness (µm) 4.5 ± 0.4
INK PROPERTY• Ink Color Black• Ink transparency
IMAGE PROPERTY• Image Density: Min. 1.2 (nylon)
Min. 1.0 (acetate)• Image Resolution: Min. ANSI B
IMAGE DURABILITY• Ironing resistance: GD max. 0.07 (printing cloth ground, covered cloth ground) • Smear resistance (wet): No damage of the image, does ink transfer• Washing resistance (water 5 times):
• Washing resistance (dry 5 times):
• Bleach resistance:
• Sweat resistance:
USAGE ENVIRONMENT: 5 ~ 35°C (41 ~ 95°F), 30 ~ 85%RHSTORAGE CONDITIONS: Keep indoors, away from high temperatures, high humidity and
direct sunlight. Keep master rolls hanging horizontally.GUARANTEE PERIOD:* Finished rolls: 4 years after manufacturing* Master rolls : 1 year after coating
FEATURES:• Printable on receiving cloths (nylon, polyester and acetate) and films• Super smear resistance up to 150°C (302°F); no blurring of image occurs from ironing• Print images are highly durable against water and dry cleaning• Superior thermal head matching qualities using Ricoh's unique back-side coating
ID min. 1.20 (polyester) ID min. 1.00 (acetate)
* All tests specifications are based on Ricoh's standard test methods.
* ID(GD): The differences in image (ground) density resulting from the "before test" and "after test".
ID min. 1.50 (nylon)ID min. 1.25 (polyester) ID min. 1.10 (acetate) ID min. 1.40 (nylon)
ID min. 0.75 (acetate) ID min. 1.25 (nylon)ID min. 1.20 (polyester) ID min. 1.00 (acetate)
More than 0.65 ~ 1.65
Min. 0.8 (polyester)
ID min. 1.20 (nylon)ID min. 0.95 (polyester)
THERMAL TRANSFER RIBBONPRODUCT INFORMATION
SPECIALTY RESIN
(For Textile Applications)
Ricoh Electronics, Inc.2320 Red Hill Ave., Santa Ana, CA 927051125 Hurricane Shoals Rd., Lawrenceville, GA 30043Customer Service 1 (800) 843-7058Toll-Free Fax 1 (888) 843-7059e-mail: [email protected]://www.rei.ricoh.com
The above data represents product averages, allowing for industry accepted variances.These products should be tested in the end-use conditions to insure that they meet the
requirements of the specific application. Specifications may change without notice.
Ricoh Electronics, Inc.
Manufacturing Facilities Customer Service2320 Red Hill AvenueSanta Ana, CA. 92705
1125 Hurricane Shoals RoadLawrenceville, GA. 30043
Toll-Free Number 1 (800) 843-7058Toll-Free Fax 1 (888) 843-7059
Worldwide Phone +01 (949) 263-2000Worldwide Fax +01 (949) 263-2152
Web site: www.rei.ricoh.comE-mail: [email protected]