REYNOLDS NUMBER ENERGY LOSSES DUE TO FRICTION (Topic 4).ppt
-
Upload
gurlz-wawa -
Category
Documents
-
view
300 -
download
1
Transcript of REYNOLDS NUMBER ENERGY LOSSES DUE TO FRICTION (Topic 4).ppt
-
8/10/2019 REYNOLDS NUMBER ENERGY LOSSES DUE TO FRICTION (Topic 4).ppt
1/25
-
8/10/2019 REYNOLDS NUMBER ENERGY LOSSES DUE TO FRICTION (Topic 4).ppt
2/25
LEARNING OUTCOMES
Upon completion of this course, students should beable to:
Explain clearly the basic principles andcharacteristics of fluid mechanics, and fluid flows inpipe and open channel (C3)
www.themegallery.com
( PLO1;CLO1;LD1;C3 )
-
8/10/2019 REYNOLDS NUMBER ENERGY LOSSES DUE TO FRICTION (Topic 4).ppt
3/25
4.1 Understand the behaviour of fluidsflowing in pipes
4.1.1 Define steady flow and unsteady flow
4.1.2 Explain laminar flow, turbulent flow and
transition flow
4.1.3 State the Reynolds number formula
4.1.4 Identify the limiting values of the Reynolds number
4.1.5 Calculate the Reynolds number
( PLO1;CLO1;LD1;C3 )
-
8/10/2019 REYNOLDS NUMBER ENERGY LOSSES DUE TO FRICTION (Topic 4).ppt
4/25
Type of Flow
i- Laminar flow.
- Laminar flow is when the particles of fluidmoving in straight lines.
- Low velocity which call streamline Fluid particle path
in the pipe
Diagram
4.1
ii- Transition flow.
When the flow changes from laminar flow to turbulent
flow conditions,
-
8/10/2019 REYNOLDS NUMBER ENERGY LOSSES DUE TO FRICTION (Topic 4).ppt
5/25
iii- Turbulent flow
The particles is bent and curved lines that cross each
other.
iv. Uniform flow
Uniform flow is when the velocity of the fluid andparticles in the pipe section is the same at all side.
V1=V2
V V1
-
8/10/2019 REYNOLDS NUMBER ENERGY LOSSES DUE TO FRICTION (Topic 4).ppt
6/25
V- Non-Uniform flow
VV1
Nota:-
V V1
Non-uniform flow is the velocity of fluid particles is different from
one section to another.
The steady flow is the flow which have a flowrate
(volume flow per second) which is the same throughout the pipe
iv- Steady flow
VV1
V V1
Nota:-
Q1 = Q2
A1V1 = A2V2
vi- Non-Steady flow
Irregular flow / non steady flow is the flow which have a flowrate
(volume flow per second) is not the same throughout the pipe.
-
8/10/2019 REYNOLDS NUMBER ENERGY LOSSES DUE TO FRICTION (Topic 4).ppt
7/25
To State and Use of Reynolds NumberFormula
Re =
Vd
or Re = v d
Reynolds fou nd for ;
Re
-
8/10/2019 REYNOLDS NUMBER ENERGY LOSSES DUE TO FRICTION (Topic 4).ppt
8/25
Reynolds number
Experimental Reynolds
- The experiment is designed to see how the flowing ina pipe, ie whether it is laminar, turbulent orintermediate.
- This experiment was
initiated by the :
Prof. Osborne Reynold
- Prof. Osborne conclude that
flow condition be affected by
dynamic viscosity, density, diameter & velocity
-
8/10/2019 REYNOLDS NUMBER ENERGY LOSSES DUE TO FRICTION (Topic 4).ppt
9/25
Example 1
Fluid flow in a pipe diameter of 30 cm with a
velocity of 0.21m/s and the kinematicviscosity 1.14mm2/s, calculate the Reynoldsnumber and specify the type of flow
vd6
1014.1
30.021.0
x
x
Re ==
= 55263
It is a turbulent flow because, Re > 2000.
-
8/10/2019 REYNOLDS NUMBER ENERGY LOSSES DUE TO FRICTION (Topic 4).ppt
10/25
-
8/10/2019 REYNOLDS NUMBER ENERGY LOSSES DUE TO FRICTION (Topic 4).ppt
11/25
4.2.1 Explain main losses and minor losses in a pipe system
4.2.2 Define the friction factor
4.2.3 Explain Darcys equation for computing the energy
loss due to friction for either laminar or turbulent flow
4.2.4 Explain the Hagen-Poiseuille equation for
computing the energy loss due to friction in laminar flow
4.2.5 Determine the friction factor using Moodys Diagram
4.2.6 Determine the energy loss due to friction
( PLO1;CLO1;LD1;C3 )
-
8/10/2019 REYNOLDS NUMBER ENERGY LOSSES DUE TO FRICTION (Topic 4).ppt
12/25
www.themegallery.com
Contents
2 types of losses in a pipe system1
Darcy-Weisbach formula2
Places where minor head losses may
possibly occur (entry & exit area, suddenly
enlargement, suddenly reduction, bend and
valve
3
Flow rate in pipe system4
-
8/10/2019 REYNOLDS NUMBER ENERGY LOSSES DUE TO FRICTION (Topic 4).ppt
13/25
www.themegallery.com
HEAD LOSS
MAIN LOSSES- Darcy-Weisbach
formula
- Hf= 4fLV
2
2gd
= fLQ2
3d5
2 TYPES OF HEAD LOSS
MINOR LOSSES
- Entrance loss- Exit loss
- Suddenlyenlargement- Suddenly
Contraction- Bend- Valve
-
8/10/2019 REYNOLDS NUMBER ENERGY LOSSES DUE TO FRICTION (Topic 4).ppt
14/25
FORMULA
MAIN LOSSES:
-Energy losses due to friction in pipe system
- Darcy-Weisbach formula
Hf= 4fLV2
2gd
@ = fLQ2
3d5
f = friction coefficient l = pipe length (m)
v = velocity (m/s)
d = pipe diameter (m)
Q = flowrate (m3/s)
-
8/10/2019 REYNOLDS NUMBER ENERGY LOSSES DUE TO FRICTION (Topic 4).ppt
15/25
EXAMPLE 1
Calculate the head loss (energy) due to friction in the
pipe 500 m long and 20 cm diameter when water flowwith a velocity of 3m/s. Take f (coefficient of friction) =0.01.
Given: length of pipe (l) = 500 m
Diameter (d) = 20 cmVelocity (v) = 3 m/s
Friction coeff(f) = 0.01
Used formula hf=hf = 4 ( 0.01) ( 500) ( 3 )2
2 x 9.81 (0.2)
= 45.87 m
-
8/10/2019 REYNOLDS NUMBER ENERGY LOSSES DUE TO FRICTION (Topic 4).ppt
16/25
EXAMPLE 2
Calculate the head loss (energy) as the
resistance to friction in the pipe 300 m longand 150 mm diameter when the flow rate is2.75m3/min. (f = 0.01 )
Length of pipe = 300 m
Diameter = 150 mmFlowrate = 2.75 m3/ min
-
8/10/2019 REYNOLDS NUMBER ENERGY LOSSES DUE TO FRICTION (Topic 4).ppt
17/25
EXAMPLE 3
Calculate the head loss (energy) as the resistance to friction inthe pipe 300 m long and 150 mm diameter when the flow rateis 2.75m3/min. (f = 0.01 )
Length of pipe = 300 mDiameter = 150 mmFlowrate = 2.75 m3/ min
Used formula hf = Q = 2.75 m3/min
Change into m3/sQ = 2.75 m3/60 s= 0.046 m3/s
From formula flowrate Q = AVV = Q/A
= 0.046( 0.15)2/4
= 2.6 m/s.
hf= 4 (0.01)(300 )(2.6 )2
2(9.81)(0.15)
= 27.56 m
gd
vlf
2
...4 2
-
8/10/2019 REYNOLDS NUMBER ENERGY LOSSES DUE TO FRICTION (Topic 4).ppt
18/25
EXAMPLE 4
Head difference between the two end pipesof 300mm diameter, 250m long and is 1.5m.
calculate the flow rate through the pipe ifthe coefficient of friction is 0.01.
Given: a head difference (hf) = 1.5 m
The pipe length = 250mDiameter = 0.3 m
Solution :
hf=
1.5 = 0.01( 250 ) Q2
3 ( 0.3 )5
Q = 0.0661 m3/s
5
2
3
..
d
Qlf
-
8/10/2019 REYNOLDS NUMBER ENERGY LOSSES DUE TO FRICTION (Topic 4).ppt
19/25
EXAMPLE 5
A tank was built four miles of a student
dormitory that can accommodate 5000students. Water delivered from the tank tothe hostel with a pipe. Every student in adormitory with 200 liters per day. Water ispumped to the hostel for 20 hours a day. If
the head losses due to friction is 20m ofwater and the pipe friction coefficient is0.008, calculate the diameter of the pipeused.
Given: a head difference (hf) = 20 mThe pipe length = 200 mThe coefficient of friction = 0.008
-
8/10/2019 REYNOLDS NUMBER ENERGY LOSSES DUE TO FRICTION (Topic 4).ppt
20/25
hf = fl Q2
3d5
20 = 0.008(4000)(0.01389)
3 (d )5
d =
Kadaralir Q = 5000x200
= 1 x 106liter
=
= 0.01389m3/s606020
10101 36
xjamx
xx
-
8/10/2019 REYNOLDS NUMBER ENERGY LOSSES DUE TO FRICTION (Topic 4).ppt
21/25
4.2.4 Explain the Hagen-Poiseuille equationfor computing the energy loss due to
friction in laminar flow
Hagen-Poiseuille equation defines the flowthrough a tube and how this flow is affected bythe attributes of the tube, the length and radius,and the attributes of the fluid and also theviscosity.
The Hagen-Poiseuille formula
hf= 32 Lvgd2
Where, -Dynamic viscosity d - diameterL - length of pipe
v - velocity
g- acc. of gravity
-
8/10/2019 REYNOLDS NUMBER ENERGY LOSSES DUE TO FRICTION (Topic 4).ppt
22/25
4.2.5 Determine the friction factor usingMoodys Diagram
-
8/10/2019 REYNOLDS NUMBER ENERGY LOSSES DUE TO FRICTION (Topic 4).ppt
23/25
A Moody Diagram can be used to estimatefriction coefficients
The Moody friction factor - (or f)- is used inthe Darcy-Weisbach major loss equation. Thecoefficient can be estimated with the diagram
above.
If the flow is transition - 2300 < Re < 4000- theflow varies between laminar and turbulent flow
and the friction coefficient is not possible todetermine. The friction factor can usually beinterpolated between the laminar value atRe =2300 and the turbulent value at Re = 4000.
-
8/10/2019 REYNOLDS NUMBER ENERGY LOSSES DUE TO FRICTION (Topic 4).ppt
24/25
http://www.engineeringtoolbox.com/docs/documents/618/pipefric.pdfhttp://www.engineeringtoolbox.com/docs/documents/618/pipefric.pdf -
8/10/2019 REYNOLDS NUMBER ENERGY LOSSES DUE TO FRICTION (Topic 4).ppt
25/25
EXAMPLE 1
Water with a dynamic viscosity 1.49x10-3 Ns/m2 flows
through a pipe of 0.3 cm in diameter with a velocity of0.9m/s. The length of the pipe is 9m. Given f =16/Re
a) Calculate the Reynolds number and state the type offlow
b) Calculate the head loss due to friction, using Hagen-Poisulle formula
c) Calculate the head loss due to friction, using Darcy-Weisbach formula
www.themegallery.com