THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC.

PROPRIETARY NOTE* *

DO NOTSCALE FROM

THIS PRINT

QSS-XXX-XX-XXX-D-RA-XX-XXXNo OF POSITIONS

-025, -050, -075, *-100(PER ROW)

(SEE NOTE 4)*(SEE NOTE 12)

ROW SPECIFICATION-D: DOUBLE (USE QSS-25-01-D-XX-RA)

LEAD STYLE

PLATING SPECIFICATIONSEE TABLE 8, SHEET 6

-RA: RIGHT ANGLE

OPTION-LS1: LOCKING SCREW (SEE FIG 2, SHT 4) (FOR MATING WITH QTS-...-RA-..LS1)-MTI: THREADED INSERT (NOT AVAILABLE W/ LS1 OPTION) (SEE FIG 5, SHT 6)-SP: SOLDER PIN (NOT AVAILABLE W/LS1 OPTION) (USE SP-19-T) (SEE FIG 3, SHT 5) -K: KAPTON PAD (SEE FIG 4, SHT 5) (USE K-500-300)

-WT: WELD TAB(SEE NOTE 4) (USE WT-16-XX-T)

-01: .062 BOARD-02: .093 BOARD

.012 REF0.30

.025 SQ0.64 REF (TYP) (SEE NOTE 4)

"D" REF

.7838 REF19.91.069 REF1.75

(SEE TABLE 2) "E" REF

"C" REF

.186 REF4.71

.328 REF8.33

.245 6.22REF

.600 15.24

24 EQ SPACES@ .0250[.635] =

.560 14.227 EQ SPACES @ .080[2.03] =

.096 REF2.44

.114±.003 2.89±0.08 (TYP) (SEE NOTE 4)

C2-B-MV

C3-F-MV

C15-A-MV

AP 01CL

C

C

C

CL CL

QSS-25-01-D-XX-RA

02

.250 REF (TYP)6.35

"A" REF

.280 REF7.11

.006 REF0.15

"B" REF

.560 14.22REF

.250 MAX REF (TYP)6.35

.1240 INSCRIBED3.15 REF (TYP)

C1-A-DC AP

CONNECTOR TO PCB MOUNTING

POINT (2 PLCS)(SEE NOTE 10)

C

.125 REF3.18

FIG 1QSS-075-01-XXX-D-RA-WT SHOWN

(SOME CENTER DETAILS REMOVED FOR CLARITY)

* = SEE NOTE 12C

CPC THIS SHEET

C1, C15

SHEET OF

UNLESS OTHERWISE SPECIFIED,DIMENSIONS ARE IN INCHES.TOLERANCES ARE:DECIMALS ANGLES.XX: .01 [.3] 2.XXX: .005 [.13].XXXX: .0020 [.051]

MATERIAL:.635mm DOUBLE ROW RIGHT ANGLE SOCKET STRIP

BY:QSS-XXX-XX-XXX-D-RA-XX-XXX

DWG. NO.

DESCRIPTION:DO NOT SCALE DRAWING

KEVIN B 01/22/02 61

SHEET SCALE: 1.5:1

INSULATOR: LCP, COLOR: BLACK

TERMINAL, GROUND PLANE & WELD TAB: PHOS BRONZE

F:\DWG\MISC\MKTG\QSS-XXX-XX-XXX-D-RA-XX-XXX-MKT.SLDDRW

NOTES:

1. REPRESENTS A CRITICAL DIMENSION.2. BURR ALLOWANCE: .0010 MAX.3. MINIMUM PUSHOUT FORCE: 6 OZ.4. WELD TABS (WT-16-XX-T) NOT AVAILABLE ON -025 POSITION. WT OPTION MUST BE SELECTED FOR -050, -075 & -100 POSITIONS.5. IF NEEDED, -L PLATING CAN BE SUBSTITUTED FOR -F PLATING.6. IM-1G18-XX-1-XX RETENTION TO BE 1.0 LBS. MINIMUM PRIOR TO SECOND ROW FILL.7. DESIGNED FOR USE WITH A .062 OR .093 THICK PCB8. ASSEMBLIES TO BE PACKAGED IN TRAYS.9. NOTE DELETED10. TORQUE TO BE 10.0 IN-OZ USING 4-40 UNC SCREW.11. USE -Z- DATUM ZONE ONLY FOR MEASUREMENTS.12. AVAILABLE FOR EXISTING CUSTOMERS ONLY.

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail info@SAMTEC.com code 55322

REVISION AP

THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC.

PROPRIETARY NOTE* *

AP

AP

AP

AP

AP

AP

AP

"F"(SEE NOTE 4 & 11)

.442 REF11.21

.010 REF0.25

"G" REF(SEE NOTE 11)

.113 2.87REF

.040 REF1.02.025 REF0.64

.285 REF7.24

.148 3.75 (SEE NOTE 4)

.354 REF8.99

.0040 0.102

.1700 4.318 REF C4-REF

C5-B-MV

C6-B-MV

C7-REF

C12-REF

C13-F-OG

C9-REF

C17-REF

C21-B-MV

AP

"F"C-178-02-XXX(SEE TABLE 8, SHEET 6)

IM-1G18-XX-1-XXX (SEE TABLE 4 & TABLE 8, SHEET 6)

C-177-01-XXX(SEE TABLE 8, SHEET 6)

C

C

C

C

C

C

(LOCATE ASSY ON DATUM -C-FOR MEASUREMENT)

C

SEE BOTTOM ROW-TAIL DETAIL

WT-16-XX-T(SEE NOTE 4 )(SEE TABLE 4)

C

C

SEE TOP ROW-TAIL DETAIL

SEE TABLE 3TOP ROW & BOTTOM ROW

-C-

.018 0.457REF

30° TYP REF

DETAIL "F" SCALE 10 : 1

.004 REF0.10(BOTTOM ROW)

(MEAS BOTH ENDS)(SEE NOTE 11)

C8-REF

C-177-01-XXX(SEE TABLE 8, SHEET 6)

C

BOTTOM ROW - TAIL DETAIL(LOCATE ASSEMBLY ON

DATUM -C- FOR MEASUREMENT)

-C-

.004 REF0.10(TOP ROW)

(MEAS BOTH ENDS)(SEE NOTE 11)

C11-REF AP

TOP ROW - TAIL DETAIL(LOCATE ASSEMBLY ON

DATUM -C- FOR MEASUREMENT)

C-178-02-XXX(SEE TABLE 8, SHEET 6)

C

-C-

* = SEE NOTE 12

CPC THIS SHEET

C5, C6,C21

SHEET OF

.635mm DOUBLE ROW RIGHT ANGLE SOCKET STRIP

BY:QSS-XXX-XX-XXX-D-RA-XX-XXX

DWG. NO.

DESCRIPTION:DO NOT SCALE DRAWING

KEVIN B 01/22/02 62

SHEET SCALE: 6:1

F:\DWG\MISC\MKTG\QSS-XXX-XX-XXX-D-RA-XX-XXX-MKT.SLDDRW

REVISION AP

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail info@SAMTEC.com code 55322

THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC.

PROPRIETARY NOTE* *

AP

.285 REF7.24 .004 REF0.10(BOTTOM ROW)(SEE NOTE 11)

C7-REF

C10-REF

C8-REF

QSS-25-01-D-XX-RA

IN-PROCESS 1(FILL BOTTOM ROW)

(SEE INSPECTION VIEW 1 FOR ORIENTATION AND CPC'S)

C-177-01-XXX(SEE TABLE 8, SHEET 6)

-C-

SEE TABLE 3, SHT 2WITHIN ROW

"G" REF(SEE NOTE 11)(SEE TABLE 4, SHEET 2)

.354 REF8.99

.424 REF10.77

C17-REF

C12-REF

AP

AP

IM-1G18-XX-1-XXX (SEE TABLE 4, SHEET 2 & TABLE 8, SHEET 6)

IN-PROCESS 2(FILL IM-1G18)

(SEE INSPECTION VIEW 2 FOR ORIENTATION AND CPC'S)

-C-

.285 (TYP)7.24

.046 1.17REF

C7-B-MV

INSPECTION VIEW 1(FILL BOTTOM ROW)

(LOCATE ASSEMBLY ON DATUM -C- FOR MEASURMENT)

C-177-01-XXX(SEE TABLE 8, SHEET 6)

C

-C-

Z1Z2

'G' 'H'

.004±.002 0.10±0.05(BOTTOM ROW)(SEE NOTE 11)

C8-B-MV

DETAIL 'G' SCALE 6 : 1

C

Z1

.004±.002 0.10±0.05(BOTTOM ROW)

(SEE NOTE 11)

C10-B,I-MV

C8-B-MVDETAIL 'H' SCALE 6 : 1

C

C

SEE TABLE 3, SHT 2WITHIN ROW

Z2

.354 8.99

.046 1.17 REF

C17-B,I-MV

INSPECTION VIEW 2(FILL IM-1G18)

IM-1G18-XX-1-XXX (SEE TABLE 4, SHEET 2 & TABLE 8, SHEET 6)

C

-C-Z1 Z2

"G"(SEE TABLE 4, SHEET 2)

(SEE NOTE 11)

"G"(SEE TABLE 4, SHEET 2)(SEE NOTE 11)

C12-B-MV C12-B-MVC C

Z1 Z2

.046 REF1.17

ISO VIEW OF-Z- DATUM ZONE

Zx

CPC THIS SHEET

C7, C8, C10, C12,

C17

SHEET OF

.635mm DOUBLE ROW RIGHT ANGLE SOCKET STRIP

BY:QSS-XXX-XX-XXX-D-RA-XX-XXX

DWG. NO.

DESCRIPTION:DO NOT SCALE DRAWING

KEVIN B 01/22/02 63

SHEET SCALE: 1.5:1

F:\DWG\MISC\MKTG\QSS-XXX-XX-XXX-D-RA-XX-XXX-MKT.SLDDRW

REVISION AP

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail info@SAMTEC.com code 55322

THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC.

PROPRIETARY NOTE* *

AP

FIG 2QSS-075-01-XXX-D-RA-WT-LS1 SHOWN(SAME AS FIG. 1, EXCEPT AS SHOWN)

(SOME CENTER DETAILS REMOVED FOR CLARITY)

"H" REF

"E" REF (SEE TABLE 2, SHEET 1)

C22-B-CPC

.442 REF11.21 .004 REF0.10(TOP ROW)(SEE NOTE 11)

.1700 4.318

C18-REF

C4-REF

C24-REF

C11-REF

C-178-02-XXX(SEE TABLE 8, SHEET 6)

IN-PROCESS 3(FILL TOP ROW)

(SEE INSPECTION VIEW 3 FOR ORIENTATION AND CPC'S)

SEE TABLE 3, SHT 2WITHIN ROW

AP 'J'

INSPECTION VIEW 3(FILL TOP ROW)

(LOCATE ASSEMBLY ON DATUM -C- FOR MEASURMENT)

.1700 4.318 C4-B-MV

DETAIL 'J' SCALE 6 : 1

C

.442 11.21

.046 1.17 REF

C9-B-MVC

-C-

Z1 Z2

'K' 'L'C-178-02-XXX(SEE TABLE 8, SHEET 6)

.004±.002 0.10±0.05(TOP ROW)

(SEE NOTE 11)

C11-B-MV

DETAIL 'K' SCALE 6 : 1

C

Z1

.004±.002 0.10±0.05TOP ROW(SEE NOTE 11)

C24-B,I-MV

C11-B-MV

DETAIL 'L' SCALE 6 : 1

C

C

SEE TABLE 3, SHT 2 WITHIN ROW

Z2

* = SEE NOTE 12

CPC THIS SHEET

C4, C9, C11, C22,

C24

SHEET OF

.635mm DOUBLE ROW RIGHT ANGLE SOCKET STRIP

BY:QSS-XXX-XX-XXX-D-RA-XX-XXX

DWG. NO.

DESCRIPTION:DO NOT SCALE DRAWING

KEVIN B 01/22/02 64

SHEET SCALE: 1.5:1

F:\DWG\MISC\MKTG\QSS-XXX-XX-XXX-D-RA-XX-XXX-MKT.SLDDRW

REVISION AP

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail info@SAMTEC.com code 55322

THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC.

PROPRIETARY NOTE* *

.065±.010 1.65±0.25

.790 REF20.07

.250 REF6.35

"J"±.020 [0.51] C16-B-MVC

FIG 4-K OPTION

QSS-075-01-XXX-D-RA-WT-K SHOWN(SAME AS FIG. 1, EXCEPT AS SHOWN)

(SOME CENTER DETAILS REMOVED FOR CLARITY)

"B"(SEE TABLE 1, SHEET 1)

.035 REF0.89

.055 1.40

C23-B-MV

C19-B-MV

SP-19-T

QSS-25-01-D-XX-RA-SP

C

C

.081 REF2.06

.333 REF8.46

FIG 3QSS-075-01-XXX-D-RA-WT-SP SHOWN(SAME AS FIG. 1, EXCEPT AS SHOWN)(NOT AVAILABLE WITH LS1 OPTION)

(SOME CENTER DETAILS REMOVED FOR CLARITY)

* = SEE NOTE 12

CPC THIS SHEET

C16, C19, C23

SHEET OF

.635mm DOUBLE ROW RIGHT ANGLE SOCKET STRIP

BY:

QSS-XXX-XX-XXX-D-RA-XX-XXXDWG. NO.

DESCRIPTION:DO NOT SCALE DRAWING

KEVIN B 01/22/02 65

SHEET SCALE: 1:0.666667

F:\DWG\MISC\MKTG\QSS-XXX-XX-XXX-D-RA-XX-XXX-MKT.SLDDRW

REVISION AP

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail info@SAMTEC.com code 55322

THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC.

PROPRIETARY NOTE* *

AP

.274 6.96REF

FIG 5QSS-075-01-XXX-D-RA-WT-MTI SHOWN(SAME AS FIG. 1, EXCEPT AS SHOWN)

(SOME CENTER DETAILS REMOVED FOR CLARITY)

"K" REF

"L" REF

C20-B-CP

C1-A-DC

#4-40 THREAD REF

C

C

* = SEE NOTE 12

CRITICAL DIMENSION INSPECTION INSTRUCTION TABLE

ASSEMBLY OPERATION IN-PROCESS INSPECTION

FILL C-177-XX-XXX C1, C2, C7, C8, C10FILL IM-1G18-XX-1-XXX C5, C12, C17

FILL C-178-XX-XXX C2, C4, C5, C11, C24FILL WT-16-XX-XX C6, C21

-LS1 C1, C22-MTI C1, C20-SP C1, C19, C23-K C1, C16

CPC THIS SHEET

C1, C20

SHEET OF

.635mm DOUBLE ROW RIGHT ANGLE SOCKET STRIP

BY:

QSS-XXX-XX-XXX-D-RA-XX-XXXDWG. NO.

DESCRIPTION:DO NOT SCALE DRAWING

KEVIN B 01/22/02 66

SHEET SCALE: 1:0.666667

F:\DWG\MISC\MKTG\QSS-XXX-XX-XXX-D-RA-XX-XXX-MKT.SLDDRW

REVISION AP

520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail info@SAMTEC.com code 55322