REVISION AB...
5
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. TOLERANCES ARE: DECIMALS ANGLES .XX: .01[.3] 2 .XXX: .005[.13] .XXXX: .0020[.051] THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC. PROPRIETARY NOTE * * Pb THIS PRODUCT MANUFACTURED WITH LEAD-FREE PROCESSING C C DO NOT SCALE FROM THIS PRINT SEAC-XXX-XX-XX.X-TU-TU-X POSITIONS (SEE NOTE 10) -020, -030**, -040***, -050**** ROWS -04,-06,-08,-10 CABLE LENGTH -XX.X (INCHES) (04.0[101.6] MIN) (SEE NOTE 6) END ONE -TU END TWO -TU LATCH STYLE -N: NO LATCHES (SEE FIG 2, SHT 3) -BLANK: LEAVE BLANK FOR SIDE LATCHES (SEE FIG 1) ** AVAILABLE IN -04, -06, -08 ROWS ONLY *** AVAILABLE IN -04, -06 ROWS ONLY **** AVAILABLE IN -04 ROWS ONLY "A" REF CABLE LENGTH + .585[14.86] 1% LENGTH = .075 - .005 +.010 1.91 - 0.13 +0.25 REF "B" .153 3.89 REF CABLE LENGTH 1% (SEE NOTE 6) .720 18.29 "A" "A" 'E' SEAC-XX-XX HDRL-02 (SEE NOTE 5) C C C GROUND GROUND SIGNAL SIGNAL HDRL-15 (SEE NOTE 9) (SEAC-030-06-XX.X-TU-TU SHOWN) .735 18.67 REF (TYP) "D" END 1 (J1) END 2 (J2) .037 0.93 (2 PLCS) PIN 1 C END 2 (J2) USES RED PCBS .056±.004 REF 1.42±0.10 (PCB THICKNESS) .100 2.54 (TYP) REF SECTION "A"-"A" SCALE 2.5 : 1 DETAIL 'E' SCALE 2 : 1 CABLE LENGTH (REF) PIN 1 END 1 (J1) USES GREEN PCBS C FIG 1 (SEAC-030-06-XX.X-TU-TU) SHEET OF MATERIAL: CABLE ASSEMBLY, SEAC SYSTEM BY: SEAC-XXX-XX-XX.X-TU-TU-X DWG. NO. DESCRIPTION: DO NOT SCALE DRAWING C. PIERCE 08/27/2010 5 1 SHEET SCALE: 1:1 F:\DWG\MISC\MKTG\SEAC-XXX-XX-XX.X-TU-TU-X-MKT.SLDDRW NOTES: 1. REPRESENTS A CRITICAL DIMENSION. 2. ALL ASSEMBLIES TO BE 100% ELECTRICALLY TESTED. 3. ALL ASSEMBLIES TO BE 100% HI-POT TESTED AT 300V. 4. PACKAGE ASSEMBLIES IN ANTI-STATIC OR STATIC DISSIPATIVE BAGS. 5. LABEL TO BE CENTERED ON CABLE ASSY AS SHOWN. LABEL TO CONTAIN: PART NUMBER, SHOP ORDER & DATE CODE. 6. CABLE LENGTH GREATER THAN 40.0"[1016mm] IS A VALID PART NUMBER, BUT IS NOT SUPPORTED BY S.I. TEST DATA. 7. LATCH MINIMUM RETENTION TO BE 4.45 N (1.0lb) 8. NOTE DELETED. 9. LABEL TO BE CENTERED ON FIRST CABLE RIBBON AS SHOWN. LABEL TO CONTAIN: "J1 →" WHERE ARROW POINTS TOWARDS J1 END. 10. FOR PIN COUNTS 300 AND HIGHER PLEASE CONTACT SAMTEC. 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail [email protected] code 55322 SEAC-XX-XX: LCP, UL 94 V0, COLOR: BLACK SUB-IM-LTC-06-01-N: NYLON/BeCu SUB-SEAC-XXX-XX.XX-TU-TU: FR4/COPPER/PVC/TEFLON/MACROMELT OM646 DP-01-XX: STAINLESS STEEL HDRL-02: POLYESTER REVISION AB
Transcript of REVISION AB...
-
UNLESS OTHERWISE SPECIFIED,DIMENSIONS ARE IN INCHES.TOLERANCES ARE:DECIMALS ANGLES.XX: .01[.3] 2 .XXX: .005[.13].XXXX: .0020[.051]
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE* *
Pb THIS PRODUCT MANUFACTUREDWITH LEAD-FREE PROCESSING
CC
DO NOTSCALE FROM
THIS PRINT
SEAC-XXX-XX-XX.X-TU-TU-X
POSITIONS (SEE NOTE 10)-020, -030**, -040***, -050****
ROWS-04,-06,-08,-10
CABLE LENGTH-XX.X (INCHES)
(04.0[101.6] MIN)(SEE NOTE 6) END ONE
-TU
END TWO-TU
LATCH STYLE -N: NO LATCHES (SEE FIG 2, SHT 3) -BLANK: LEAVE BLANK FOR SIDE LATCHES (SEE FIG 1)
** AVAILABLE IN -04, -06, -08 ROWS ONLY*** AVAILABLE IN -04, -06 ROWS ONLY**** AVAILABLE IN -04 ROWS ONLY
"A" REF
CABLE LENGTH + .585[14.86] 1%LENGTH =
.075-.005+.010 1.91-0.13
+0.25
REF"B"
.153 3.89REF CABLE LENGTH 1%
(SEE NOTE 6)
.720 18.29
"A"
"A"'E'
SEAC-XX-XX
HDRL-02(SEE NOTE 5)
CC
C
GROUND
GROUNDSIGNAL
SIGNAL
HDRL-15(SEE NOTE 9)
(SEAC-030-06-XX.X-TU-TU SHOWN)
.735 18.67REF (TYP)
"D"
END 1(J1)
END 2(J2)
.037 0.93(2 PLCS)
PIN 1
C
END 2(J2)
USES RED PCBS
.056±.004 REF1.42±0.10(PCB THICKNESS)
.100 2.54(TYP) REF
SECTION "A"-"A" SCALE 2.5 : 1
DETAIL 'E' SCALE 2 : 1
CABLE LENGTH(REF)
PIN 1
END 1(J1)
USES GREEN PCBS
C
FIG 1(SEAC-030-06-XX.X-TU-TU)
SHEET OF
MATERIAL:
CABLE ASSEMBLY, SEAC SYSTEM
BY:SEAC-XXX-XX-XX.X-TU-TU-X
DWG. NO.
DESCRIPTION:DO NOT SCALE DRAWING
C. PIERCE 08/27/2010 51
SHEET SCALE: 1:1
F:\DWG\MISC\MKTG\SEAC-XXX-XX-XX.X-TU-TU-X-MKT.SLDDRWNOTES:
1. REPRESENTS A CRITICAL DIMENSION. 2. ALL ASSEMBLIES TO BE 100% ELECTRICALLY TESTED. 3. ALL ASSEMBLIES TO BE 100% HI-POT TESTED AT 300V. 4. PACKAGE ASSEMBLIES IN ANTI-STATIC OR STATIC DISSIPATIVE BAGS. 5. LABEL TO BE CENTERED ON CABLE ASSY AS SHOWN. LABEL TO CONTAIN: PART NUMBER, SHOP ORDER & DATE CODE. 6. CABLE LENGTH GREATER THAN 40.0"[1016mm] IS A VALID PART NUMBER, BUT IS NOT SUPPORTED BY S.I. TEST DATA. 7. LATCH MINIMUM RETENTION TO BE 4.45 N (1.0lb) 8. NOTE DELETED. 9. LABEL TO BE CENTERED ON FIRST CABLE RIBBON AS SHOWN. LABEL TO CONTAIN: "J1 →" WHERE ARROW POINTS TOWARDS J1 END.10. FOR PIN COUNTS 300 AND HIGHER PLEASE CONTACT SAMTEC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail [email protected] code 55322
SEAC-XX-XX: LCP, UL 94 V0, COLOR: BLACKSUB-IM-LTC-06-01-N: NYLON/BeCuSUB-SEAC-XXX-XX.XX-TU-TU: FR4/COPPER/PVC/TEFLON/MACROMELTOM646DP-01-XX: STAINLESS STEELHDRL-02: POLYESTER
REVISION AB
-
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE* *
.037 0.93
"B""B"
C
SEAC-XX-XX
.720 18.29
SUB-IM-LTC-06-01-N .075+-.010.005 1.91
+-0.250.13 (TYP)
SECTION "B"-"B"
C
C
SEAC-XX-XX
"C" "C"
SUB-SEAC-XXX-XX.X-TU-TU
END 1(J1)
END 2(J2)
"D"
"D"
END 1(J1)
END 2(J2)
.100 2.54REF (TYP)
SECTION "C"-"C" SCALE 2 : 1
DP-02-XX
.030 0.76 REF
.062 1.57
.008 0.20 MAX
SECTION "D"-"D" SCALE 4 : 1
C
PRESS DOWEL PINS
C
IN PROCESS 1(INSERT SIDE LATCHES)
(FOR -BLANK LATCH STYLE)
IN PROCESS 2(INSERT CABLE SUB-ASSY
AND DOWELS)
IN PROCESS 3(PRESS DOWEL PINS)
SHEET OF
CABLE ASSEMBLY, SEAC SYSTEM
BY:SEAC-XXX-XX-XX.X-TU-TU-X
DWG. NO.
DESCRIPTION:DO NOT SCALE DRAWING
C. PIERCE 08/27/2010 52
SHEET SCALE: 1:1
REVISION AB
F:\DWG\MISC\MKTG\SEAC-XXX-XX-XX.X-TU-TU-X-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail [email protected] code 55322
-
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE* *
"B" REF(SEE SHEET 1,
TABLE 1) "E"
LENGTH =CABLE LENGTH + .640[16.2] 1%
(REF).153 3.89 REF
GROUNDSIGNAL
GROUND
SIGNAL
SEAC-XX-XX-N SEAC-XX-XX-NPIN 1
USES GREEN PCBS
END 1(J1)
USES RED PCBS
END 2(J2)
PIN 1
FIG 2(SEAC-030-06-XX.X-TU-TU-N)(NO SIDE LATCH VERSION)
(SAME AS FIG 1, EXCEPT AS SHOWN)
SHEET OF
CABLE ASSEMBLY, SEAC SYSTEM
BY:
SEAC-XXX-XX-XX.X-TU-TU-XDWG. NO.
DESCRIPTION:DO NOT SCALE DRAWING
C. PIERCE 08/27/2010 53
SHEET SCALE: 1:1
REVISION AB
F:\DWG\MISC\MKTG\SEAC-XXX-XX-XX.X-TU-TU-X-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail [email protected] code 55322
-
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE* *
SHEET OF
CABLE ASSEMBLY, SEAC SYSTEM
BY:
SEAC-XXX-XX-XX.X-TU-TU-XDWG. NO.
DESCRIPTION:DO NOT SCALE DRAWING
C. PIERCE 08/27/2010 54
SHEET SCALE: 1:1
REVISION AB
F:\DWG\MISC\MKTG\SEAC-XXX-XX-XX.X-TU-TU-X-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail [email protected] code 55322
-
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE* *
SHEET OF
CABLE ASSEMBLY, SEAC SYSTEM
BY:SEAC-XXX-XX-XX.X-TU-TU-X
DWG. NO.
DESCRIPTION:DO NOT SCALE DRAWING
C. PIERCE 08/27/2010 55
SHEET SCALE: 1:1
REVISION AB
F:\DWG\MISC\MKTG\SEAC-XXX-XX-XX.X-TU-TU-X-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150PHONE: 812-944-6733 FAX: 812-948-5047e-Mail [email protected] code 55322
Sheet1Drawing View1Drawing View2Drawing View5Drawing View137Drawing View155Section View "A"-"A"Detail View 'E' (2 : 1)Drawing View164
Sheet2Drawing View140Section View "B"-"B"Drawing View142Drawing View144Section View "C"-"C"Section View "D"-"D"
Sheet 3Drawing View172Drawing View173Drawing View174
Sheet 4Sheet 5
