ReverseRollCoaterleaflet_4
description
Transcript of ReverseRollCoaterleaflet_4
-
REVERSE ROLL COATER
The reverse roll coater enables very high viscosity coatings to be applied at coatweights from 10 to 200gsm wet, with the same coating set-up. A superb qualitycoating can be achieved with glass like, smooth surface, completely independent ofthe caliper, absorbency, resilience or even slack edges of the substrate.
MANUFACTURING & DESIGN ENGINEERS TO THE CONVERTING INDUSTRIES.
-
Peakdale Road Brookfield Industrial Estate Glossop Derbyshire SK13 6XE England
Tel: +44 (0)1457 862776 Fax: +44 (0)1457 862433 email: [email protected] Web: www.delpro.co.uk
Built to the highest standards, the
Delpro reverse roll coater incorporates
the following key features:
Features
Exceptionally robust construction to handle the high hydrodynamic forces.
High precision, chromed steel coating rolls with a TIR of 2 or better.
Micrometer gap setting mechanism,based upon ground steel wedge system
adjusted by backlash free pre-loaded
ballscrews with digital indication for
repeatability.
Hydraulic loading of gravure to applicator roll.
Optional trolley based rolls for ease of change of rolls or coating system.
Sleeve based rubber covered applicator roll for ease of change of coating width.
Edge and side dams, easily adjustable for change of width.
COATERS LAMINATORS DRYERS CONDITIONERS FULLY AUTOMATED REEL STANDS
ZERO SPEED SLICERS FLEXO PRINTERS CUSTOM DESIGNED MACHINE REBUILDS & RETROFITS
TURN-KEY COATING & LAMINATING PRODUCTION LINES
Specification
Viscosity Range 150 - 50,000 Cps
Web width range 300 - 2500mm
Coat weight range 10 - 200gsm wet
SLEEVE BACKINGROLL
PRECISION METERING ROLLHYDRAULICALLYLOADED
PRECISION GAP ADJUSTER 1 MICRON RESOLUTION
ADJUSTABLE EDGE AND SIDE DAMS
PRECISION APPLICATORROLL
TROLLEYBASEDASSEMBLY