RETECONREPORT - Retecon Machine Tools · 011 976 8600 | 083 383 7796 or email...
Transcript of RETECONREPORT - Retecon Machine Tools · 011 976 8600 | 083 383 7796 or email...
Retecon - Over 45 years Service to the Industry
1
Machine Tools | Cutting Tools | Accessories and Measuring Equipment
RETECONREPORTAn information service to our clients
2019
| 2
Retecon - Over 45 years Service to the IndustryRetecon - 49 Years Service to the Industry
IN THIS EDITIONTRUMPF Showroom Opening pg 1
TRUMPF 2D-Laser Cutting Machines pg 2
TRUMPF 2D-Laser Cutting Machines pg 3
DMG MORI Automation Solutions - PH150 pg 4
DMG MORI Robo2Go 2nd Generation pg 5
HEXAGON Leica Absolute Tracker pg 6
MARKATOR FlyMarker / LMT FETTE pg 7
STUDER S33 pg 8
KOIKE PNC 12 Extreme pg 9
175 Years of KASTO pg 10
MACKMA Pipe Benders / VICIVISION M1c pg 11
Retecon Service Contracts pg 12
Visit us at our NEWTRUMPF Showroom !!
Retecon - Over 45 years Service to the Industry
2 For further Information contact Graham Rome on 011 976 8600 | 083 324 4458 or email [email protected]
Retecon - 49 Years Service to the Industry
TruLaser 1030/1040 fiber Positioning speed 140 m/min, 2-4 kW laser power
Automatically checks the status of the protective glass during cutting process.
Operator only has to check it when prompted to do so by the software.
Huge savings in downtime.
Through a camera system, the op-erator can drag DXF file onto video image on control onto offcuts and post produce .
No further programming necessary.
No downtime due to short supply.
Reduces downtime by automatically changing nozzles.
No operator intervention.
Nozzles are placed back into their position for further use.
Large range of focal diameters allows for highest production rates through thick and thin material.
2 core fibre optic cable allows for a larger kerf width when cutting thick material, thus easiest part removal.
2 core fibre optic cable allows for smallest kerf width in thin materials, thus faster cutting speeds.
Manufactured in-house at Trumpf.
The most productive laser source for 2D cutting.
Stable laser power at focal point over the years, thanks to extra diode power and a power sensor.
Lubrication of machine takes place automatically.
No need to stop production. (as is the case with a manual grease gun)
Overload sensors on the drives stops the axis when a cutting head colli-sion occurs.
Cutting Head coupling is simply placed back into position after a collision.
No damage, no downtime and re entry into program in seconds.
Automatically changes the focal diameter and focal position within split-seconds during the cutting process.
With “BrightLine fiber” big ranges of focal diameters are possible.
Highest production, lowest scrap rates.
Collision ProtectionTruDisc Laser
Protective Glass Monitoring
Drop & Cut
Central Oil Lubrication BrightLine fiber
Universal Cutting Head
Nozzle Changer
Benefits of visiting our Trumpf showroom:- Lets discuss your future machine requirements- Test your applications- Train your operators- Train your programmers- Laser Marking applications- Power Tools display & demo’s
Retecon - Over 45 years Service to the Industry
3For further Information contact Graham Rome on 011 976 8600 | 083 324 4458 or email [email protected]
Retecon - 49 Years Service to the Industry
TruLaser 3030/3040/3060 fiber
TruLaser 5030/5040/5060 fiberPositioning speed 283 m/min,
4-10 kW laser power
Smart Beam Control
Nozzle Changer
Nozzle Inspection
Made in Germany
Positioning speed 170 m/min, 3-8 kW laser power
CoolLine
Highspeed Eco
Smart Collision Prevention
Conveyor Belt
2D-laser cutting machines by TRUMPF
Increase your cutting speed by as much as 100%.
Reduce your gas consumption by 70%.
Higher productivity, higher profit margins.
A conveyor belt under the machine efficiently takes slag and small par-ticles to a bin at the back end of the machine.
Reduced cleaning efforts & more productive time on the machine.
Using water mist spray during thick mild steel cutting process, increas-es the process reliability.
Up to 25% less scrap rate due to tighter sheet layouts.
Overheating of thick sheets is prevented allowing for higher cut quality.
A software based cutting process that monitors the nesting and avoids cutting head collisions alto-gether.
A solution for thinner gauge material where the risk of collisions is high.
Reduce non-productive times, because operations relating to setting the laser beam are automated.
Sensor continuously analyses the laser beam and adjusts fo-cus and diameter automatically during the cutting process.
On the 5000 series the nozzle changer can be loaded during the cutting process.
Nozzle drawer exits the outside of the machine for loading new nozzles.
Reduces down times for nozzle replacements.
5 - 10 seconds for a nozzle inspection directly on the machine.
An automated process and visual on the control.
Everything from one source through world market leaders - TRUMPF Germany.
Long term agency agreement between Retecon & Trumpf – 38 years !!!
Retecon - 49 Years Service to the Industry
4 For further Information contact Franz Studer on 011 976 8600 | 083 302 0119 or email [email protected]
Fold door+
All DMG MORI machines are available with a preparation package for various automation options.
Fully automated Pallet Handling - integrated and perfectly fitted to the machine!
+
PH 150 EROWA
PH 150 - Available for many DMG MORI milling machines with Siemens and Heidenhain control!
+
Complete solution from “one hand” leading to higher pro-ductivity and quality!
+
More value creation through integral automation solutions
Seperate control panel+Sliding door+
PH 150 FAMOT
Control panel integrated in machine control+
PH 150 with easy accessibility
Enhanced Features with Jobmanager - Control Comfort Plus.
+
HIGHLIGHTS
Cost-effective automation solution - Economical starting with the first automation!
+
Pallet Handling for a better utilisation of the machine at weekends and night shifts!
+
NEW DMG MORI Vertico Design!+PH 150 FAMOT
Retecon - Over 45 years Service to the Industry
5For further Information contact Franz Studer on 011 976 8600 | 083 302 0119 or email [email protected]
Retecon - 49 Years Service to the Industry
Fold door
Handling of chuck parts Ø 25 175 mm, up to 250 mm length
+
Handling of shaft parts Ø 20 170 mm, up to 950 mm length
+
HIGHLIGHTS
Dialog controlled programming via CELOS
+
Payload robot 10/20/35 kg+
New gripper geometry for reduced impact contour and im-proved load capacity
+
Customized workpiece trays possible
+
Robo2Go 2nd Generation:
Flexible automation, programmed easily
Tool holder
Parallel use with bar loader possible
+
Easy conversion to turning machines
+
New software for even easier opertaion+
No robot programming knowledge necessary+
Multijob function: Different jobs on one workpiece tray. Ideal for small and medium batch sizes
+
Easy programming of individual workpiece trays+
Creation of a process with Drag&Drop of predefined programm modules
+
Home function for easy retraction and setup of the system
+
ROBO2GO 2ND GEN. - EQUIPMENT
GILDEMEISTER DREHMASCHINEN GMBH 5
Installation on three prisms
Laser scannerChangeable carrier
Changeable workpiece holdersSpace-saving installation thanks to inclined Fanuc robot
Changeable withcrane & forklift
Gripper set
Nozzle
Seperate control panel
6 For further Information contact Neels (JHB / DBN), Arno (JHB) or Llewellyn (CT / PE) on 011 976 8600 or email [email protected]
Retecon - 49 Years Service to the Industry
For further Information contact Joe Tippel or Moritz Herrmann on 011 976 8600 or email [email protected]
LEICA ABSOLUTE TRACKER
LARGE-SCALEMEASUREMENTMADE SIMPLE
THE DIRECT SCANNINGLASER TRACKERTHE DIRECT SCANNING LASER TRACKER
PROD
UCT BRO
CHU
RE
Retecon - Over 45 years Service to the Industry
7
Retecon - 49 Years Service to the Industry
For further Information contact Joe Tippel or Moritz Herrmann on 011 976 8600 or email [email protected]
For further Information contact Joe Tippel or Moritz Herrmann on 011 976 8600 or email [email protected]
Options
Battery Operated Hand-Held Marking System FlyMarker® mini 120/45
®
Treatments
Logo Line
Galvanized Varnished
LMT Tools Advances Thread Rolling Development
LMT Fette has demonstrated how to combine quality and speed within this field with its new generation EVOline thread rolling head.
It creates threads whose fatigue strength is three times greater than that produced using cutting techniques.
Simple handling – optimized processes
LMT Tools brings together the expertise of leading specialists in precision tool technology.
Retecon - Over 45 years Service to the Industry
8 For further Information contact Mike or Hans-Peter on 011 976 8600 or email [email protected]
Retecon - 49 Years Service to the Industry
S33
If you don’t know today what you’ll be grinding tomorrow, then the S33 will impress you with its universality and
from grinding between centers to live grinding. You can grind even complex workpieces in a single clamping: This is made possible by the new grinding head with two motor spindles. You also
types.
The Art of Grinding. A member of the UNITED GRINDING Group
The good value solution for individual requirements.
NEW
Retecon - Over 45 years Service to the Industry
9
Retecon - 49 Years Service to the Industry
For further Information contact Marc Edwards on 011 976 8600 | 083 383 7796 or email [email protected]
PNC - 12 EXTREME■ Plug and cut - minimal installation time
■ Comes standard with CAD/CAM software
■ Easy and simple CNC operation with pre-installed shape templates
Affordable, and versatile CNC cutting machine, KOIKE designed a machine that is operated by CNC and suitable for both oxy-fuel and plasma cutting.
OXY-FUEL NOW AVAILABLE EX STOCK
Retecon - Over 45 years Service to the Industry
10
The only non-mandrel machines in the market that allow both right & left bending.
Simple & advanced PLC to bend pipes.
Modular machine.
For further Information contact Marc Edwards on 011 976 8600 | 083 383 7796 or email [email protected]
KASTO Maschinenbau GmbH & Co. KG celebrates its 175th birthday this year. The saw-
ing and storage technology specialist with headquarters in Achern, Baden has evolved
from a one-man-business into a globally successful company - and just like back then,
it remains in the hands of the family who founded it. In celebration, KASTO provides an
in-depth look into its history books - and is hosting a contest to find the oldest KASTO
saw still in use.
175 years of KASTO: Family business celebrates its anniversary.
Retecon - 49 Years Service to the Industry
Retecon - Over 45 years Service to the Industry
11
For further Information contact Mike Lee on 011 976 8600 | 083 441 3391 or email [email protected]
PIPE BENDERS where “QUALITY COMES FIRST”
The only non-mandrel machines in the market that allow both right & left bending.
Simple & advanced PLC to bend pipes.
Modular machine.
For further Information contact Neels Engelbrecht on 011 976 8600 | 081 010 8191 or email [email protected]
Retecon - 49 Years Service to the Industry
High performance in a compact machine.The ideal tool to flank multi-spindle lathes or sliding head lathes. For fittings, nuts, small turned parts and precision parts up to 160 x 60 mm.Unbeatable price-performance in a compact machi -ne.
Measurement solutions providing rapid returnon investment.Increase production, improve flexibility, reduce
-lues are out of tolerance.
Helps operators in batch changeover.Allows rapid batch changing. It can be used by more than one operator at the same time.
M1c
Measuring Solutions
Retecon - 49 Years Service to the Industry
12
CONTACT DETAILS
Head Office & ShowroomP.O. Box 1472,Kempton Park, 1620100 Plane Road,Spartan Industrial Township,Kempton ParkTel: 011 976 8600Telefax: 011 394 2471E-mail: [email protected]
Port ElizabethP.O. Box 414Port Elizabeth, 60002A Haupt Street,Sidwell, Port Elizabeth, 6001Tel: 041 453 2720Telefax: 041 453 6678E-mail: [email protected]
DurbanP.O. Box 1186,Pinetown, 3600Unit 32, Ivy Park,3 Ivy Road,PinetownTel: 031 701 8149Telefax: 031 701 0313E-mail: [email protected]
Cape TownP.O Box 1167,Milnerton, 7435Unit 8 + 9, Peter Park,Montague Drive,Montague GardensTel: 021 555 2270/1Telefax: 021 555 2272E-mail: [email protected]
www.retecon.co.zaTo advertise please contact us:[email protected]
Design by Louise VisserProduction by Retecon (Pty) LtdCopyright Retecon (Pty) Ltd 2015
FOLLOW US ON SOCIAL MEDIA
Machine Tools | Cutting Tools | Accessories and Measuring Equipment
RETECONREPORTAn information service to our clients
2019
| 2
• Optimum support for achieving a maximum machine availability• Maximum machine uptime by adjusting all mechanical, pneumatic and hydraulic functions• Early detection of faults due to wear and tear, therefore reduced downtime and expenditure• The value of the machine is preserved• Operating costs are minimized• Service can be scheduled so as to have least impact on production operations • Breakdown response is improved as no Purchase Order is required
Why take out a Service Contract with us...?
Contact us, to find out how we can make servicing your machinery worth your while!!