Resume_shyam
-
Upload
shyam-gupta -
Category
Documents
-
view
98 -
download
1
Transcript of Resume_shyam
SHYAM GUPTA Mobile- 07838814471 / 09971197846 [email protected] [email protected] CAREER OBJECTIVE
Seeking a challenging position that will help me to utilize my skills and abilities to the
fullest and enhance my social and technical knowledge, offering security and
professional growth while being innovative and flexible.
PROFESSIONAL EXPERIENCE
MBA (Operation)+B.Tech (Mechanical) with 10+ years of experience in Project
department.
EXPERIENCE SUMMARY
CURRENT EXPERIENCE
Working with Gannon Dunkerley & Co. Limited, New Delhi as Deputy Manager from
August’14 to till date.
Company Profile:
Gannon Dunkerley & Company initially incorporated as a Private Ltd Company in 1924 was converted
to Public Ltd. Company in 1948, after taking over by Indian Management. The company has acquired
IMS certification covering ISO 14001:2004, OHSAS 18001:2007 and ISO 9001:2008 to project itself
as a Quality, Health, Safety and Environment compliant construction company, reinforcing clients
confidence.
Gannon has a distinct privilege of successfully completing over 3000 projects. Company’s regular
present staff strength is over 4239 technical and commercial personnel excluding labour and muster
staff employed at project sites.
The company has four Civil Engineering Divisions located in Delhi, Mumbai, Hyderabad and Kolkata
besides Material Handling Unit in Kolkata and Water Treatment Division in Delhi to cater to the needs
of clients across the country.
Handling some of the major Projects :-
Client: - West Bengal PHED
Package: - Bally, Jagacha Howrah Water Supply and Distribution Treatment Plant
(23.5 MLD)
Client: - State project Management unit, PHED Patna (World Bank funded
project)
Package: - Cheriya, Distt.-begusarai Water Supply and Distribution Treatment Plant
(5.65 MLD for 16 hours)
Client: - Uttar Pradesh Jal Nigam
Package: - Pratap Vihar Ghaziabad Water Treatment Plant
Major Clients
NTPC EIL BHEL PHED
UP Jal Nigam
Delhi Jal Board
Functional Areas:
Preparation & approval of project Schedule in MS project software.
To Plan, schedule & monitor procurement & design related activities.
Updating of Project Schedule fortnightly for client review.
Preparation & approval of Vendor list
Preparation of Budget for project expenses.
To ensure submission and approval of MDL from Engineering Department to client.
Preparation and approval of Billing Break-up of Main supplies, civil works, Mandatory
spares, Erection and transportation.
Calculation of estimation of erection work with detailed scope of work & releasing of
work orders to sub-contractors.
To ensure proper execution & monitoring of site related Erection and Commissioning
activities works.
Verification & measurement of mechanical sub contractors bills for releasing their
payments.
Verification of Invoices / Bills & follow up with Finance department for Vendor’s
Payments.
To expedite & coordinate supply & inspection of all equipment with vendors/ client.
Responsible for Cash flow for smooth execution of Project.
Responsible for getting Excise exemption certificates for Pip, fittings & related
equipments.
Responsible to settle claim amount for extra works of Project .
PAST EXPERIENCE
Worked with Driplex Water Engineering International Limited, New Delhi as Deputy
Manager from June’10 to July’14.
Company Profile:
Driplex Water Engineering Ltd., New Delhi is a pioneer turnkey solution provider of water treatment
plants/ Ash Handling Plants especially for the Power Sector & refineries Sector. We have in house
capabilities for process design & engineering with computer aided design, fabrication, supply,
erection, testing, commissioning, construction of associated civil works operation, training and
maintenance of plant particularly on turnkey basis. For the last three decades Driplex has executed
over 150 prestigious turnkey plants from concepts to commissioning.
Was handling some of the major Projects :-
National Capital Thermal Power Plant Stage-II Dadri (2x490MW)
Package: - Pre- Treatment Plant & Demineralization plant.
Barh Super Thermal Project Stage-I, Barh (3x660MW)
Package: - Pre- Treatment Plant & Demineralization plant.
Barh Super Thermal Project Stage-II, Barh (2x660MW)
Package: - Demineralization and CW plant. Indra Gandhi Super Thermal Power Plant Stage-I Jhajjar (3x500MW)
Package: - Pre- Treatment Plant
Farakka Super Thermal Power project Stage-III (2x550MW)
Package: - Demineralization and CW plant.
Driplex Major Clients
NTPC
BHEL
Functional Areas:
To ensure submission and approval of MDL from Engineering Department to client .
Preparation and approval of L-2 schedule.
Preparation and approval of Billing Break-up of Main supplies, civil works, Mandatory
spares, Erection and transportation.
To Plan, schedule & monitor procurement & design related activities.
Preparation of scope of work & allotment of work orders to sub-contractors for
erection & commissioning works.
To ensure proper execution & monitoring of site related Erection and Commissioning
activities works.
Verification & measurement of mechanical sub contractors bills for releasing their
payments.
Verification of Invoices / Bills & follow up with Finance department for Vendor’s
Payments.
Preparation of entire bill of material of a project.
To expedite & coordinate supply & inspection of all equipment with vendors/ client.
Responsible for getting Time extension if any delay in project.
Responsible for contract closure activities (like rebate settlement, obtain CCP's, final
time extension without LD etc.)
Responsible for Cash flow for smooth execution of Project.
PAST EXPERIENCE
Worked in ENKEI CAST ALLOY LIMITED since July’04 to May’10 in Production Planning & VAVE
(Value addition and value engineering) Deptt. as a Team Leader.
Functional Areas:
Supervising production related tasks including planning, control and troubleshooting.
Monitoring production processes, controlling rejections, analyzing defects.
Managing Shift production of Cylinder Head in LPDC (Low Pressure Die Casting)
machines.
Managing production of Cores (used in Cylinder head casting) in Core shooter
machines.
Looking after Die Maintenance.
Analysis of OEE and Productivity graph on daily basis.
Taking care of dispatches.
To calculate the daily, Monthly and Annual Profitability.
MAJOR PROJECTS DONE:
Saved cost of 1.7 Lack/Month through yield improvement project through reduce
riser area.
Saved cost 20,000 Rs/Month of Decrease Heat treatment Cycle through modification
in Design of basket. Saved cost 20,000 Rs/Month of Decrease Heat treatment Cycle
through modification in Design of basket.
Saved cost of 30,000 Rs/Month through kaizen in LPDC C.I. stock.
Saved cost of 3,000 Rs. /Month through kaizen in the spray gun consumption.
Save cost of 30,000 Rs/Month through reduce Customer Rejection from 12% to 1%.
Save Cost of 57,500 Rs/Month through reduce the degassing cycle time.
Save cost of 15,000 Rs/Month control in in-house rejection from 9% to 4%.
Save cost of 20,000 Rs/Month through improve Production of 120
shots/day/machine.
Save cost of 11,000 Rs/Month through Kaizen in pouring Spoon.
Save Cost of 25,000 Rs/Month through modification of pouring spoon.
Save cost of 23,000 Rs/month through reuse of Nitrogen Cylinder.
EDUCATION
B.TECH in Mechanical Engineering in 2004 from JSS ACADEMY OF TECHNICAL
EDUCATION, NOIDA.
MBA in Operation from IGNOU University in 2010.
Vocational course of part modeling and assembly with mechanical desktop 2004 DX.
Two Months full time training of SAP PP module.
COMPUTER SKILLS
TOOLS : MS-OFFICE
ERP APPLICATION : SAP 4.7 PP MODULE
ACADEMIC PROJECT/TRAINING
Computer controlled material handling robotic arm (pick and place robot).
DESCRIPTION: The objective of the project was to work efficiently under different
environmental condition, and to transfer inline products to different location by robot.
This system was capable of material handling even that places where man could not
work. This was two degree of freedom robot. I had completed this project with the help
of D.C. motor, electronic circuitry gears.
PAPER PRESENTA TION
Coordinator of Technology Day sponsored by department of science and
technology, govt. of India, held at JSS Academy of Technical Education,
Noida, on June 2002.
Participated and won second prize in paper presentation category in DST
sponsored Technology Day held at JSS Academy of Technical Education,
Noida.
Won first prize in Robotics and Mechatronics paper presentation held at
IT- BHU.