Resume - Jason Lewis

Page | 1 RESUME -‐ Jason Lewis, Electrical Engineer

RESUME -‐ JASON LEWIS, ELECTRICAL ENGINEER

Mobile 0448 021 077 Email Address [email protected] LinkedIn http://www.linkedin.com/pub/jason-lewis/a1/329/9b0/en CAREER SUMMARY Degree qualified Electrical Engineer with extensive experience in delivering

control system projects from design through to commissioning. These projects are in the main industry areas of Oil and Gas, Power Generation, and Mining.

EDUCATION Bachelor of Electrical Engineering (Honours), Sydney University 1989 - 1992

CAPABILITIES AND STRENGTHS

• • Proven history of successfully delivering small to very large control system projects from design through to commissioning.

• Extensive experience applications for the Oil and Gas, Power Generation, and Mining industries.

• Always considered as an invaluable member of any team that I work within. • Personal Strengths;

o Perseverance, working hard to complete projects successfully. o Creative, good problem solving skills. o Leadership, encouraging others within the team to help achieve

their best. o Love of Learning, always looking for opportunities to learn.

CAREER HIGHLIGHTS COMPANY PROJECT HIGHLIGHTS

YOKOGAWA AUSTRALIA, SENIOR SYSTEMS ENGINEER

INPEX LNG • Lead DCS Software Engineer, Site Commissioning

APLNG Upstream Coal Seam Gas

• Centum VP DCS, ProSafe RS SIS, Stardom RTU, and Fast Tools SCADA application for Gas Processing and Water Treatment Facilities, and Gas Wellheads.

• Fast Tools SCADA was adopted late in the project. I was instrumental in developing the SCADA application for the APLNG project. It is now the largest Fast Tools SCADA application in the world.

• Project role from project commencement to completion, involving design, implementation, replication, and technical assistance.

Taichung Power Station, Taiwan

• Centum CS3000 application for 2 x 550MW Coal Fired Boilers. • Implementation and site based commissioning role from

project start though to completion (3 years). • Working with the end user (Taiwain Power Company) in an

advisory role. • Superior performance achieved from these units compared

to the existing 8 generator units located on the same site.


DETAIL OF WORK HISTORY

LEAD DCS SOFTWARE ENGINEER, COMMISSIONING, INPEX LNG

June 2015 to Present

SENIOR SYSTEMS ENGINEER, YOKOGAWA AUSTRALIA, BRISBANE, QLD

March 2011 to March 2015

Senior Control Systems Engineer, APLNG Upstream Gas project

Description of Role

• Design role based in the Customers’ offices producing project common software specifications, Gas Plant

software design documentation, and software typical development.

• Because of my knowledge of DCS and SCADA I was providing technical assistance and advice within the team.

• Manage the Gas Processing Facilities software implementation and replication process. This involved

implementation by Yokogawa USA, China, and Brisbane, replication by Yokogawa China, and testing in Brisbane.

Key Achievements

• Assisting with the development of the Fast Tools SCADA for APLNG that was adopted late in the project phase,

helping to make this application the largest Fast Tools application in the world today.

• Instrumental in successfully delivering the Gas Processing Facility DCS and SCADA applications despite many late design changes and schedule pressures.

I&C ENGINEER, AURECON (EX CONNELL WAGNER), BRISBANE, QLD

August 2008 to February 2011

Senior I&C Engineer, Power Systems Department Description of Role

Owners Engineer - I&C for the Callide Oxyfuel project • Reviewing and commenting on documentation from the various

Vendors. • Reviewing site work progress. • Organizing or carrying out site work that was outside the Vendor’s scope.

Project Documentation • Writing and reviewing control system specifications and documentation

for power station projects within Australia and overseas. Power System modelling

• Using Paladin Designbase software. • Created a model of the Mount Isa Power system using information

provided by Mt Isa Power Station and its major customers. • Validation of the model using data from past electrical faults. • The model was used to determine better protection settings for the Mt Isa

power station feeders.


CONTROL SYSTEMS ENGINEER, YOKOGAWA AUSTRALIA

February 2002 to August 2008

Commissioning Engineer – Taichung Power Station Unit 9&10 (2 x 550MW), Taiwan Description of Role

• Implementation and site commissioning for 53 Centum CS3000 Field Control Stations, 9000 I/O Points controlling two 550MW coal fired generators.

• Spent 3 years (continuous) on site during the construction and commissioning phases of both generator units.

• Responsible for software and hardware issues, system configuration and tuning, Training of the Customer’s personnel, and management of spare parts.

• Configuration and maintenance of the Exaquantum plant Historian. Key Achievements

• Dealing with the customer requirements over the 3 year period, • Assisting in the fine tuning of the DCS which allowed these stations to

deliver a superior performance when compared to the other 8 generator units operating on this site.

Lead Systems Engineer – Plant Control System, Phu-Kham Copper Gold Mine, Laos. Description of Role

• Lead Engineer role covering the full scope of work from initial Software Design, Implementation, Factory Testing, and then assisting the Customer with Site Commissioning.

• System comprising of 15 Centum CS3000 Field Control Systems, with approximately 5000 I/O Points.

Key Achievements • Leading a team of several Engineers to successfully deliver this project on

time and within budget. Lead Systems Engineer – Plant Control System for Cogeneration Boiler & 30MW Generator, Condong & Broadwater. Description of Role

• Lead Engineer Role responsible for Software Design, Implementation, Factory Testing, and Site Support.

• My role also included the designing, documentation and Implementation of the Plant Coordinated Controls, and implementation of Boiler Fuel/Water Controls, and Bagasse Conveyor Controls.

• System comprising of Centum CS3000 Field Control Systems and 1 Safety Control System, 3000 I/O Points.

Key Achievements • Leading a team of several Engineers to successfully deliver

this project on time and within budget.

DETAIL OF WORK HISTORY (CONT’D)


CONTROL SYSTEMS ENGINEER, WOODWARD / GE POWER SYSTEMS

September 1995 to December 2001

Lead Control Systems Engineer (various projects) Key Achievements

• Proving my resourcefulness in successfully delivering some major projects, often without any assistance.

I was involved in a wide variety of projects, however some significant projects are listed below. Turbine Control System, 500MW Main Line Generator, Wallerawang Power Station. Description of Role

• Woodward MicroNet TMR control system. • Control System hardware and software design and implementation,

including documentation and drawings. • Develop a customized 3rd party solution for interfacing the control system

to the antiquated hydraulic governor system. • Design, implementation and testing of control system software using

Woodward GAP™. • Develop training material and carry out Customer training. • Produce project documentation, such as system manuals, cabinet and

system drawings (using AutoCAD®). • Carry out site installation and commissioning with the assistance of a site

based Contractor. Gas Turbine and Compressor Control Systems for Santos Moomba Gas Plant. Description of Role

• The system included a total of 6 Woodward NetCon/MicroNet Control Systems, and Intellution SCADA packages.

• Design and implement control system software for the Gas Turbine control to replace the Vendor control system, and incorporating the standard Woodward Compressor Anti-Surge control system configuration.

• Implementation of control system software using Woodward GAP™. • Carry out software testing using Woodward’s plant simulator package. • Carry out site installation and testing, and commissioning of the Gas

Turbine and Compressor anti-surge controls. • Produce project documentation, such as system manuals, cabinet and

system drawings (using AutoCAD®). • Develop and carry out Customer training.

Power Station Control System, Harwood Sugar Mill. Description of Role

• The system included 3 Woodward 505 Turbine Controllers each with Synchronizer and Load Controls, and 2 Citect SCADA stations.

• Load control scheme allowed for import/export control onto the local electricity grid, as well as operation when isolated from the grid.

• Responsible for System design and commissioning. • Produce project documentation, such as system manuals, cabinet and

system drawings (using AutoCAD®). • Develop and carry out Customer training.

DETAIL OF WORK HISTORY (CONT’D)


SUMMARY OF COMMMUNICATION PROTOCOL EXPERIENCE

I have experience in configuring and commissioning these communication

protocols;

• Fieldbus communication to field transmitters. • HART communication to field transmitters. • Profibus DP. • Modbus (ASCII, RTU and TCP). • IEC61850.

SUMMARY OF SOFTWARE EXPERIENCE

I have experience in using these Control system software packages;

Yokogawa Software Experience • Strong background in using CS3000/Centum VP (DCS), • Yokogawa internal software tools such as yGet and EngTools. • Strong background in using Fast Tools SCADA. • Stardom (PLC). • ProSafe RS (SIS). • Exaquantum (Historian).

Woodward/GE Software Experience • GAP™ Programming Software. • GE Mark V (Training only).

Other Software Packages Experience • Intellution SCADA. • Citect SCADA. • AutoCAD®. • Microsoft Excel, Word, Access and Visio. • Paladin Designbase (Power System Modelling).

REFERENCES Provided upon request.

Resume - Jason Lewis

Documents

Transcript of Resume - Jason Lewis