Page 1 of 12

RESUME

Dr. Arshad Hussain Khan

NAME ARSHAD HUSSAIN KHAN (Ph.D., IIT Delhi)

Designation: Associate Professor

Department: Mechanical Engineering Department

Z. H. College of Engineering & Technology

Aligarh Muslim University

Aligarh- 202002

Telephone No. : +91-571-2700920-Ext.1881

+91 9711556950 (Cell)

Email: ah.khan.me@amu.ac.in, khanahamu@gmail.com

Specialization and Research Interests Nonlinear Dynamics

Computational Mechanics

Impact Mechanics

Composite and Smart Structures

Academic Experience

Thirteen+ years of teaching and research experience in Mechanical Engg. Dept.,

AMU Aligarh

Associate Professor, Department of Mechanical Engineering, AMU, Aligarh, India,

24.05.2016- till date.

Assistant Professor (Sr. Scale), Department of Mechanical Engineering, AMU, Aligarh,

India, 2010- till date.

Assistant Professor, Department of Mechanical Engineering, AMU, Aligarh, India, 2006-

2010.

Guest Faculty, Department of Mechanical Engineering, AMU, Aligarh, India, from

13/08/2005 to 15/05/2006.

Lecturer, Department of Mechanical Engineering, AMU, Aligarh, India, from 26/08/2004

to 15/07/2005.

Lecturer, Department of Mechanical Engineering, AMU, Aligarh, India, from 08/12/2003

to 15/05/2004.

Page 2 of 12

Lecturer, University Polytechnic, AMU, Aligarh, India, from 09/10/2003 to 08/12/2003.

More than 3 years of Teaching Assistantship at Applied Mechanics Department, IIT

Delhi (On QIP leave from MED, AMU Aligarh, 2011-2014).

Courses taught

Under Graduate Post Graduate

o ME 411/417

o ME 491A/B

o ME 499

o ME 314

o ME 315

o ME 393

o ME 213

o ME 211/294

o ME 111

o ME 193

Mechanical Vibration

Project

Vibration Lab.

Kinematics of M/c’s

Machinery Dynamics

Kinematics & Stress

Analysis Lab.

Mechanics of Solids

M/c Drawing &

Computer Graphics

Applied Mechanics

Engineering Graphics

o ME 635

o ME 632

o ME 637

o ME 638

o ME 631

o ME 634

o ME 678

o ME 696

o ME 697

o ME 691/791D

o ME 798 D

Mechanical Vibration –II

Mechanisms

Finite Element Method

Advanced Dynamics

Advance Mechanics of

Solids

Experimental Stress

Analysis

Rotor Dynamics

Experimental Stress

Analysis & Vibration Lab.

Computational Mechanics

Lab.

Project

Dissertation

Research Supervision

Ph. D.

Guiding three Ph.D. student in the area of Nonlinear Dynamics and Smart structures.

S.No. Title of Ph.D. Thesis Name of Candidate Remarks

1 Studies on Nonlinear Forced Vibration

Response of Laminated Composites

Ahmad Saood Ongoing

2 Nonlinear Dynamics of Composite Structures Mohd Taha Parvez Ongoing

3 Geometric and Material Nonlinear Modelling

of Smart Composite Structures

Mr. Bhanu Prakash Ongoing

Master’s Thesis

Supervised Eight (12) M.Tech. Dissertations 01 on-going –

S.No. Title of Dissertation Name of Candidate Month &

Year

1 Impact of Spherical projectile on thin plates on

a pneumatic gun setup

Rashid Akhtar May 2006

Page 3 of 12

2 Vibration Attenuation of Smart Encastered

Beam using FEM based on third order theory

Tanveer Saghir May 2007

3 Analysis of composite plate using third order

theory

Sanjay Gupta July 2007

4 Estimation of random input force in a two

degree of freedom coupled System using

Volterra series

Md. Zafer Hussain July 2007

5 Vibration Attenuation and Shape Control of

Surface Mounted, Embedded Smart Beam

using FEM

Vivek Rathi Nov. 2010

6 Comparative Analysis of Multi Layered

Composite Plates using Classical and Higher

order theories

Zeeshan Ahmad Dec. 2010

7 Response of Vehicle Models under different

road conditions using FEM and Solid Work

Hari Shanker Jan. 2011

8 Biodynamic Response Characteristics of the

Seated Vehicle Driver Subjected to Whole

Body Vibration

Mohd. Iqbal 2011

9 Free and Force vibration analysis of laminated

composite plates

Niyaz Ahmad 2016

10 Influence of Fiber Angle on the Periodic

Response of Laminated Composite Plates

Sayed Imran Ali 2016

11 Non-linear Steady state forced vibration

analysis of plates

Mirza Shariq Beg 2017

12 Non-linear steady state periodic response of

cylindrical open shells

Rehan Ahmad 2017

B.Tech. Projects

Guided Eight (09) B.Tech. Projects (01, on-going).

M. Tech. Projects

Guided Thirteen (13) M. Tech. Projects (02, on-going).

Academic Qualification

DEGREE YEAR INSTITUTION REMARKS

Ph. D (Applied Mechanics

Dept.)

2015 Indian Institute of Technology,

Delhi, New Delhi

Awarded

Page 4 of 12

Ph. D Thesis

Title - Nonlinear Dynamics of Bimodular Laminated Composite Panels.

Specialization - Computational mechanics and Non-linear dynamics.

M.Tech. Dissertation

Title - Parameter Estimation in a Non-linear Coupled System Subjected to Random

Excitation.

Subject - Inverse random vibration analysis employing Volterra/Wiener Series.

Academic Details

Secured Grade Point Score 9.5 in Ph D.

Secured 75.4% (First Class with Hons.) in M. Tech while majoring in Machine Design.

Secured 85.87% (First Class with Distinction) in Bachelor of Engineering.

Passed GATE with 91.9 Percentile.

Scholarships/Awards Received

Recipient of QIP scholarship from MHRD for pursuing Ph.D. from Indian Institute of

Technology Delhi.

Recipient of Graduate Aptitude Test for Engineers (GATE) Scholarship from the

Government of India.

Awarded 2nd Prize in the Poster Competition held during Open House 2014 organized by

IIT Delhi on April 19, 2014.

Workshop/Conference/Seminar Organised

Coordinator, Fifteen Days FDP and Training Program on ANSYS software being held at

Department of Mechanical Engineering, ZHCET, AMU Aligarh during March 17- 31

2017.

Coordinator, One week FDP and Finishing School on Computational Methods in

Engineering Mechanics held in Department of Mechanical Engineering, ZHCET, AMU

Aligarh during October 03- 07 2016.

M. Tech. (Machine Design) 2003 ZHCET, AMU, Aligarh Hons.

B. E. (Mechanical Engg.) 1998 Gulbarga University Distinction

Page 5 of 12

Joint Secretary, National Conference on Mechanical Engineering-Ideas, Innovations &

Initiatives (NCMEI3-2016) held in Department of Mechanical Engineering, ZHCET,

AMU Aligarh during April 16- 17 2016.

Member Organizing Committee, All India Seminar on Ergonomics for Improved

Productivity (EIP-2009), Mechanical Engg. Dept., AMU Aligarh.

Member Organizing Committee, Workshop on “Computer Integrated Manufacturing

Systems (WCIMS-2009)”, Mechanical Engg. Dept., AMU Aligarh.

Resource Person/Key-Note lecture/Invited talk Delivered

Delivered lecture as a resource person in One week FDP and Finishing School on

Computational Methods in Engineering Mechanics held in Department of Mechanical

Engineering, ZHCET, AMU Aligarh during October 03- 07 2016. (Session 2016-17)

Invited Speaker in School on Computational Methods in Engineering Applications

held at IIT Kanpur during 12- 17 April 2016, and delivered inaugural lecture. (Session

2015-16)

Delivered Invited Talk in National Conference on “Recent Advancement in

Infrastructure Development” held on 12-13 March 2015 organised by Department of

Mechanlical Engineering & Civil Engineering, Mangalayatan University Aligarh.

(Session 2014-15)

Funded Projects

Departmental/Institutional Project

Member, committee for preparing proposal for induction of Mechanical Engg.

Department under DRS-SAP (SAP ID: SAP-21-2016-1023), and submitted proposal for

the grant of Rs. 150/- Lacs to UGC under DRS-SAP.

Nodal Officer (Procurement), TEQIP II a world bank project.

Nodal Officer (Finance), TEQIP III a world bank project.

Colloborative Research and Outreach activities Submitted Joint project to ARDB along with IIT Kanpur (Rs. 43.894).

Reviewed Syllabus of IIT Mandi.

External Examiners of B Tech Examinations at JMI New Delhi

Delivered invited lectures at IIT Kanpur (2015-16) and Manglaytan Univ. (2014-15).

Page 6 of 12

Training, short term courses and Summer/Winter school attended

Participated in One week FDP and Finishing School on Computational Methods in

Engineering Mechanics held in Department of Mechanical Engineering, ZHCET, AMU

Aligarh during October 03- 07 2016.

Participated in UGC-sponsored subject refresher course in environmental studies from 22

July 2015 to 11 August 2015 at UGC HRDC, AMU.

Participated in TEQIP-II sponsored Faculty development Program from 18th May, 2015

to 23rd May 2015 organised by Electrical and Petrochemical Engg. Department, AMU.

Participated in UGC – Workshop on Computer Integrated Manufacturing Systems held

on December 7-9, 2009, at Mechanical Engineering Department, AMU, Aligarh.

Participated in UGC sponsored Special Winter School from 31st December 2008 to 21st

January 2009, at Academic Staff College, AMU, Aligarh and obtained “A” Grade.

Participated in UGC sponsored Special Summer School from 4th August to 27th August

2008, at Academic Staff College, AMU, Aligarh and obtained “A” Grade.

Attended a Seminar on Introduction to ABAQUS held at DCE, New Delhi 19th Feb to

23rd Feb 2007.

Participation in Corporate life and University/Departmental Activities

Serving as Assistant Dean Student Welfare since November 2016.

Served as warden, Sir Shah Sulaiman Hall 2015-16.

Serving as Nodal officer (Procurement) in the central committee of TEQIP II.

Departmental B.Tech. Project co-ordinator.

Member purchase committee for Principal’s office ZHCET.

Served as Warden, Aftab Hall for four (04) years i.e. from July 2007 to June 2011.

Served as Program officer NSS, AMU for one term from 01/10/2009.

Assistant Superintendent of Examination at Z H College of Engineering and Technology

Centre for two years.

Worked as Scrutiny Officer for the scrutiny of answer books at Departmental Level.

Member of various Committees at College level such as- Tech Fest, Cultural Fest, Anti

Ragging and Disciplinary Committee etc.

Page 7 of 12

Member, Departmental committee for NBA accreditation.

Member, Departmental committee for preparation of 11th five year plan.

Details of Innovation/Contribution in Teaching

Involved with the review and revision of syllabus of many courses at UG and PG level.

Actively engaged in modernization of Machinery Dynamics and Impact Mechanics Lab.

Developed laboratory manual for two laboratory courses involving Vibration and Stress

Analysis.

Developed teaching aids like power point presentation for better visualization and

understanding of the subject.

Paper Presented in Seminar/Workshop/Symposia/Conferences

1. Presented research paper entitled “Periodic Response of Bimodular Angle-ply Composite

Plates under Harmonic Excitation”, in Indian Conference on Applied Mechanics

(INCAM) 2013 held at IIT Madras, July 4-6 2013.

2. Presented research paper entitled “Nonlinear Dynamic Analysis of Bimodular Laminated

Composite Plates”, in the Third Asian Conference on Mechanics of Functional Materials

and Structures (ACMFMS-2012) held at IIT Delhi Dec. 5-8 2012.

3. Presented research paper entitled “Active Vibration Control of Smart Beam with

Embedded Actuators and Sensors”, in the Third Asian Conference on Mechanics of

Functional Materials and Structures (ACMFMS-2012) held at IIT Delhi Dec. 5-8 2012.

4. Presented research paper entitled “On Analytical Modeling of Impact on Laminated

Composite Panels”, in One day Symposium on large deformation under dynamic loading

held at Indian National Science Academy, New Delhi on Sep. 01, 2012.

5. Presented research paper entitled “Vibration Attenuation of Smart Beams using Third

order theory”, in International Conference on Vibration Engineering and Technology of

Machinery (VETOMAC-VI) organized by IIT Delhi during Dec. 13-15 2010.

6. Presented research paper entitled “Optimum Damping for the Protection of Sensitive

Electronic Equipment under Harsh Harmonic Excitation- A New Approach”, in All India

Seminar on Ergonomics For Improved productivity (EIP-2009), held during 21-22 Nov.

2009 in the Mechanical Engg. Dept., AMU Aligarh.

Page 8 of 12

7. Presented research paper entitled “Estimation of Linearised Fluid Film Coefficients in a

Rotor Bearing System subjected to Random Excitation”, in 11th National Conference on

Machines and Mechanisms (NaCoMM-2003), held during Dec. 18-19, 2003, at Indian

Institute of Technology Delhi.

8. Delivered lecture in AICTE sponsored STTP on the topic “Mechatronics” held at

University polytechnic, Aligarh Muslim University, Aligarh in 2003.

Publications

Journals

1. M Yaqoob Yasin, Praveen Kumar, Arshad Hussain Khan and Bhanu Prakash,

“Nonlinear Response of Piezoelectric Curved Actuators at High Applied Electric Fields”,

Advanced Science, Engineering and Medicine Vol. 10, 2018. (Accepted) American

Scientific Publisher.

2. Arshad Hussain Khan, M Taha Parvez and M Yaqoob Yasin, “Non-linear Forced

Vibration of Cylindrical Shell Panels”, Advanced Science, Engineering and Medicine

Vol. 10, 2018. (Accepted) American Scientific Publisher.

3. Ahmad Saood, Arshad H. Khan and Ahmad A Khan, “Steady State Periodic Response

of Laminated Composite Plates with/without Geometric Nonlinearity”, Material Today

Proceedings, 4 (2017) 10225–10229.(Elsevier).

4. Afsar Husain, Raisuddin Ansari and Arshad Hussain Khan, “Experimental and

Numerical Investigation of Perforation of Thin Polycarbonate Plate by Projectiles of

Different Nose Shape”, Latin American Journal of Solids and Structures, 14 (2017), pp

357-372 (Impact factor- 1.11).

5. A. H. Khan and B. P. Patel, “Nonlinear Forced Vibration Response of Bimodular

Laminated Composite Plates”, Composite Structures 108 (2014), pp. 524-537 (Elsevier;

Impact factor- 3.858, Journal Rank: 1 in Mech. Engg., 1 in Structural Engg.; source

GOOGLE Scholar).

6. A. H. Khan and B. P. Patel, “On the Nonlinear Dynamics of Bimodular Laminated

Composite Conical Panels”, Nonlinear Dynamics 79 (2015), pp. 1495-1509 DOI

10.1007/s11071-014-1756-8 (Springer; Impact factor- 3.464, Journal Rank: 2 in

Physics & Mathematics- Nonlinear Sciences; source GOOGLE Scholar).

Page 9 of 12

7. A. H. Khan and B. P. Patel, “Periodic Response of Bimodular Laminated Composite

Cylindrical Panels with and without Geometric Nonlinearity”, International Journal of

Non-Linear Mechanics 67 (2014), pp. 209-217 (Elsevier; Impact factor- 2.074, Journal

Rank: 11 in Mech. Engg.; source GOOGLE Scholar).

8. V S N Ranjith Kumar, B.P. Patel, Arshad H Khan, “On Analytical Modeling of Impact

on Laminated Composite Panels”, Proc. Indian Natn Sci Acad 79 No.4 (2013), Spl issue

Part A, pp. 763-771.

9. Vivek Rathi and Arshad Hussain Khan, “Vibration attenuation and Shape Control of

Surface Mounted, Embedded Smart Beam”, Latin American Journal of Solids and

Structures, 3 (2012), pp 307-330, (Impact factor- 1.11).

10. A A Khan and Arshad H. Khan, “Input Identification In A Cross Coupled System”,

Advances in Vibration Engineering Vol. 6, No. 2, 2007, pp121-128.

11. A A Khan, S A Khan and Arshad H. Khan, “Polynomial Type of Stiffness Parameter

Estimation using Volterra and Wiener Series”, Advances in Vibration Engineering, Vol,

5, No. 4, Oct.-Dec. 2006, pp 353-367.

12. A. H. Khan and B. P. Patel, “Nonlinear periodic response of bimodular laminated

composite annular sector plates”, International Journal of Non-Linear Mechanics, Under

Review (Elsevier; Impact factor- 2.074).

Conferences

1. Ahmad Saood,, Arshad H Khan and Ahmad A Khan, Non-Linear Forced Vibration

Analysis Of Laminated Composite Plates, International Conference on Composite

Materials and Structures- ICCMS 2017, IIT Hyderabad, 27-29th December 2017.

2. Afsar Husain, Arshad Hussain Khan and Raisuddin Ansari, Ballistic performance

evaluation of polycarbonate plate based on quasi-static perforation, International

conference on Mechanical Materials and Renewable energy, ICMMRE, SMIT, Sikkim

Gangtok, 8- 10 Dec 2017.

3. M Shariq Beg, Arshad Hussain Khan and M Yaqoob Yasin, Effect of boundary

conditions on the non-linear forced vibration response of isotropic plates, International

conference on Mechanical Materials and Renewable energy, ICMMRE, SMIT, Sikkim

Gangtok, 8- 10 Dec 2017.

Page 10 of 12

4. Afsar Husain, Arshad Hussain Khan and Raisuddin Ansari, “Experimental investigation

of Normal impact of blunt projectile on PC plate”, 3rd Indian Conference on Applied

Mechanics (INCAM) held during July 05- 07, 2017 at MNNIT Allahabad, India.

5. Arshad Hussain Khan, M Taha Parvez and M Yaqoob Yasin, “Non-linear Forced

Vibration of Cylindrical Shell Panels”, 2nd International Conference on Mechanical and

Manufacturing Engineering (ICMME-2017), held during April 06,07-2017, SCSVMV

University, India.

6. M Yaqoob Yasin, Praveen Kumar, Arshad Hussain Khan and Bhanu Prakash,

“Nonlinear Response of Piezoelectric Curved Actuators at High Applied Electric Fields”,

2nd International Conference on Mechanical and Manufacturing Engineering (ICMME-

2017), held during April 06,07-2017, SCSVMV University, India.

7. Arshad H. Khan, “On the Stability of Periodic Response of Bimodular Laminated

Composite Plate”, International Conference on Recent Trends in Engineering and

Materials Science (ICEMS-2016), held during 17-19 March 2016 at Jaipur National

University, Jaipur, (Abstract ID 2-IC-712).

8. Ahmad Saood, Arshad H. Khan and Ahmad A Khan, “Steady State Periodic Response

of Laminated Composite Plates with/without Geometric Nonlinearity”, International

Conference on Recent Trends in Engineering and Materials Science (ICEMS-2016), held

during 17-19 March 2016 at Jaipur National University, Jaipur. (Abstract ID 2-IC-703).

9. Arshad H. Khan and Badri P. Patel, “Periodic Response of Bimodular Angle-ply

Composite Plates under Harmonic Excitation”, Proceedings of Indian Conference on

Applied Mechanics (INCAM) 2013 held at IIT Madras, July 4-6 2013, Manuscript ID –

INCAM_SM_11, pp. 1-5.

10. Arshad H. Khan and Badri P. Patel, “Nonlinear Dynamic Analysis of Bimodular

Laminated Composite Plates” , Proceedings of Third Asian Conference on Mechanics of

Functional Materials and Structures (ACMFMS-2012) held at IIT Delhi Dec. 5-8 2012,

pp 402-405.

11. Vivek Rathi, Arshad Hussain Khan, Ahmad Ali Khan, “Active Vibration Control of

Smart Beam with Embedded Actuators And Sensors”, Proceedings of Third Asian

Conference on Mechanics of Functional Materials and Structures (ACMFMS-2012) held

at IIT Delhi Dec. 5-8 2012, pp 127-130.

Page 11 of 12

12. V S N Ranjith Kumar, B.P. Patel, Arshad H Khan, “On Analytical Modeling of Impact

on Laminated Composite Panels”, Presented in One day Symposium on large

deformation under dynamic loading held at Indian National Science Academy, New

Delhi on Sep. 01, 2012.

13. R. Ansari, Sanaan H. Khan and Arshad H. Khan, “Oblique Impact of Cylindro-conical

projectile on thin Aluminium Plates”, Proceedings of International Conference on

Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM-2010)

held at IIT Kharagpur- India, Dec. 27-29, 2010, Paper No. 144.

14. Ahmad A. Khan and Arshad H. Khan, “Vibration Attenuation of Smart Beams using

Third order theory”, Proceedings of International Conference on Vibration Engineering

and Technology of Machinery (VETOMAC-VI) organized by IIT Delhi during Dec. 13-

15 2010, Reference No.- AB00-178.

15. Arshad H. Khan, Ahmad A. Khan and Akhlaque Ahmad, “Optimum Damping for the

Protection of Sensitive Electronic Equipment under Harsh Harmonic Excitation- A New

Approach”, Proceedings of All India Seminar on Ergonomics For Improved productivity

(EIP-2009), held during 21-22 Nov. 2009 in the Mechanical Engg. Dept., AMU Aligarh,

pp 401-412.

16. Khan, A Ali and Khan, Arshad Hussain, “Identification of Machine Tool Parameters

under Random Cutting Force”, Proceedings of National conference on Advances in

Mechanical Engineering (AIME-2006), held during Jan 20-21, 2006, at Jamia Millia

Islamia, New Delhi.

17. Khan, A Ali and Khan, Arshad Hussain, “Input Identification in a Cross-Coupled

System”, Proceedings of International Conference on VETOMAC-3 and ACSIM-2004,

jointly organized by the Indian Institute of Technology Kanpur and Australian

Cooperative Research Centre for Integrated Engineering Asset Management during Dec

6-9, 2004, at New Delhi, vol 1, Paper no. 64, pp 530-535.

18. Khan, A Ali and Khan, Arshad Hussain “Nonlinear Parameter Estimation in a Cross

Coupled System with Random Excitation”, proceedings of 24th International Symposium

on Space Technology and Science, May 30- June 6, 2004, Miyazaki, Japan.

19. Khan, A Ali, S. A. Khan and Khan, Arshad Hussain “Polynomial Type of Stiffness

Parameter Estimation using Volterra and Wiener Series”, Proceedings of National

Page 12 of 12

Symposium on Rotor Dynamics (NSRD-2003), Dec 15-17, 2003, Indian Institute of

Technology, Guwahati, Paper no. NSRD-2003_CP_17.

20. Khan, Arshad Hussain and Khan, A Ali, “Estimation of Linearised Fluid Film

Coefficients in a Rotor Bearing System subjected to Random Excitation”, proceedings of

11th National Conference on Machines and Mechanisms (NaCoMM-2003), held during

Dec. 18-19, 2003, at Indian Institute of Technology Delhi, pp. 380-386.

Computer Knowledge

CAE – ANSYS, ABAQUS

CAD/Preprocessor/Modeling – AutoCAD, Solid Work

Post Processor – ORIGIN, Tec Plot

Languages - FORTRAN

Operating System – Windows, LINUX

Software – MATLAB, MATHEMATICA, MS OFFICE, LaTex

Arshad Hussain Khan