ResponseCard XR

Creating Tests and Homework

ResponseCard XR

Creating Tests and Homework

®

Navigating the MenuNavigating the Menu

Press the MENU button

to bring up the Main Menu.

Press the Down Arrow twice to

select the Test/Homework

Menu.

Navigating the MenuNavigating the Menu

Press Enter to select the

Test/Homework Menu.

Test/Homework ModeTest/Homework Mode

Test/Homework Mode is

momentarily displayed.

Create a New SessionCreate a New Session

Press 1 to create a New

Test/Homework Session.

Enter Control NumberEnter Control Number

A control number is an identifier just

for you so that you can

identify each homework

assignment stored on the

ResponseCard.

Use the Left and Right

Arrows and the SEL button to enter a control number of your

choice.

NOTE: A control number that starts with 1 cannot be

edited later.

Enter Control NumberEnter Control Number

A control number can be

any combination of one to four

letters or numbers.

Here, we have identified this session as our

MATH homework.

Accept Control NumberAccept Control Number

Once you are satisfied with the Control

Number, press the Enter key.

Accept Control NumberAccept Control Number

The ResponseCard will prompt you to

verify you have entered the correct

Control Code.

Press YES to accept this code,

NO to edit it.

Answer the QuestionsAnswer the Questions

The first question is

displayed (001).

Answers can be in any format:

Multiple Choice,Numeric,

Fill-in-the-Blank.

Use the Ans Mode button to toggle between

the different answer modes.

Multiple ChoiceMultiple Choice

The default Ans Mode is multiple choice or single

number answers.

This is indicated by the 1 in the top bar

of the display.

The question is answered by

pressing any one of the numbered keys.

Pressing Ans Mode again will

toggle to the next mode.

Numeric ModeNumeric Mode

The next Ans Mode is numeric

entry. This is indicated by the

123 in the top bar of the display.

Pressing Ans Mode again will

toggle to the next mode.

You can now enter numbers, decimals

and +/- however, you must press

Enter when you are done to complete

your answer.

Alpha-Numeric ModeAlpha-Numeric Mode

The next Ans Mode is alpha-numeric

entry. This is indicated by the

123 ABC in the top bar of the display.

Pressing Ans Mode again will

toggle to the next mode.

You can enter letters and numbers as you did when setting up your ResponseCard. You must press Enter when you are done to

complete your answer.

Single Letter ModeSingle Letter Mode

The final Ans Mode is single

letter entry. This is indicated by the A in the top

bar of the display.

Pressing Ans Mode again will

toggle to the next mode.

The question is answered by

pressing one of the keys labeled A through J. You do not need to press

Enter!

Answering Single Letter ModeAnswering Single Letter Mode

If the answer to a multiple choice question is C,

then make sure you are in single letter mode and press the C key.

Answering Single Letter ModeAnswering Single Letter Mode

You will see the answer, followed by the indication

that the ResponseCard is storing the data.

(The single entry mode for numbers is the

same.)

Answering Single Letter ModeAnswering Single Letter Mode

Once the answer is stored, you are

automatically advanced to the next question.

Answering NumericAnswering Numeric

If the next question requires a numeric answer, toggle to numeric

answer mode.

Answering NumericAnswering Numeric

If the answer to the

question is 1.34, then

press those keys.

Answering NumericAnswering Numeric

Next, you must press the Enter key to accept this answer.

You will momentarily see the ‘Storing…’

message and the ResponseCard will advance to

the next question.

(The alpha-numeric mode is the same.)

Finishing the TestFinishing the Test

When you are done with the

entire assignment,

press the MENU button, also

labeled Start/End Test.

Then press YES.

Save or Send?Save or Send?

After finishing the test, you

can:

1. Immediately upload the test to the receiver if instructed to do so.

2. Save the data for later (if you’re doing homework and not in class).

3. Forget the whole thing and delete all of the work you just did!

Saved TestSaved Test

If you have chosen to save

the test, you will receive the

message that the Test was saved successfully.