RESOURCES AVAILABLE Irrigation Solutions - … · Phone +64 3 307 9081 Email [email protected]...

2
Proudly distributed by: Irrigation Solutions EASY. EFFECTIVE. EFFICIENT. Low cost, transportable, modular irrigation system Ph: 1800 755 899 Fax: 1800 244 688 www.philmac.com.au Available From: K-Line FarmPack A4 Flyer K-Line Irrigation 5 pod/1 hectare kit (FarmPack) installation and user manual K-Line Std and Mid Irrigation Product Brochure K-Line Max Irrigation Product Brochure K-Line Irrigation Technical Manual RESOURCES AVAILABLE The following resources are readily available via the Philmac website at www.philmac.com.au as well as a selection of videos on the product in use. FARM PACK Proudly distributed by: Product Overview Proudly distributed by: Proudly distributed by: Proudly distributed by: Proudly distributed by: Proudly distributed by: Proudly distributed by: Proudly distributed by: Proudly distributed by: Proudly distributed by: Proudly distributed by: Easy. Effective. Efficient Proudly distributed by: K - Line Irrig a tion 5 Pod/1 hecta r e Kit Installation and user manual RX PLASTICS LTD PO Box 360 Ashburton Phone +64 3 307 9081 Email [email protected] www.rxplastics.co.nz K-Line TM Std & Mid Irrigation The grass is always greener RX PLASTICS LTD PO Box 360 Ashburton Phone +64 3 307 9081 Email [email protected] www.rxplastics.co.nz K-Line TM Max Irrigation The grass is always greener ... RX PLASTICS LTD PO Box 360 Ashburton Phone +64 3 307 9081 Email [email protected] www.rxplastics.co.nz RX PLASTICS LTD PO Box 360 Ashburton Phone +64 3 307 9081 Email [email protected] www.rxplastics.co.nz February 2010 K-Line™ Irrigation Design Manual .... The grass is always greener WHAT’S AVAILABLE IN THE K-LINE RANGE? K-Line Standard (Std) Pod Irrigation range (430 x 230mm) offers the following selection of sprinklers: Naan 5022 sprinkler with nozzle sizes of 2.8 to 4.0mm, with a maximum spacing of up to 15m, a recommended working pressure of 2.5 to 3.5 bar, flow rate of 450 to 1100 litres/hour and diameter of 21 to 25.5m. Sprinklers are colour coded for easy identification. Nelson R2000WF sprinkler ideal for use at wind affected sites or where the option of pressure regulation is required. Has a maximum spacing of up to 15m, a recommended working pressure of 2.75 to 4.5 bar, flow rate of 201 to 1295 litres/hour and diameter of 21 to 27.4m. Sprinklers are colour coded for easy identification. Also available pre-packaged with the Nelson Mini Regulator, pressure regulated to 50PSI. Senninger 2023 sprinkler with nozzle sizes of 3.7 to 4.76mm, with a maximum spacing of up to 20m, a recommended working pressure of 2.0 to 3.5 bar, flow rate range of 700 to 1619 litres/hour and a diameter range of 26 to 30m. Sprinklers are colour coded for easy identification. K-Line Mid Irrigation pod range (560 x 290mm) provides a slightly larger pod meaning greater stability during transport offering: A Senninger 5023 sprinkler with nozzle sizes of 5.16 to 7.14mm, with a maximum spacing of up to 20m, a recommended working pressure of 2.5 to 3 bar, flow rate range of 1630 to 3260 litres/hour and a diameter range of 29.2 to 34m. Sprinklers are colour coded for easy identification. K-Line Max Irrigation pod range (860 x 590mm) is the largest pod size offering even greater stability during transport and ability to house even larger sprinklers, offering: • Senninger 7025 sprinkler with nozzle sizes of 5.56 to 9.53mm, with a maximum spacing of up to 40m, a recommended working pressure of 2.5 to 3.0 bar, flow rate range of 1880 to 5630 litres/hour and a diameter range of 34.3 to 46.3m. Sprinklers are colour coded for easy identification. • Senninger 8025 sprinkler with nozzle sizes of 9.53mm to 15.88mm, with a maximum spacing of up to 40m, a recommended working pressure of 2.5 to 3.0 bar, flow rate range of 5450 to 15,880 litres/hour and a diameter range of 39.5 to 51.4m. Sprinklers are colour coded for easy identification. K-Line Irrigation System Features Benefit Low capital cost Low capital cost to get up and running. Easy to do Ease of installation, use and operation - making it an ideal DIY project. Multi-terrain Suits all types of terrain. Low pressure Low pressure requirements. Lower power Lower power requirements than other systems. Expandable Modular system that can grow with your needs. Movable Transportable and able to cover a large area by shifting using a quad bike or ATV. Economical Low maintenance costs as the only moving parts are the sprinklers, pipe, pumps and valves. Simply scan the code with your smart phone to see how easy it is to move the K-Line Pod System. RX Plastics is New Zealand’s leading manufacturer of irrigation products, pipe and effluent dispersal systems. With over 30 years’ experience, RX Plastics has a strong innovation focus and dedication to high quality thermoplastic solutions for water transport and dispersion. The RX Irrigation and Effluent solutions are proudly distributed in Australia by Australian manufacturer and distributor, Philmac. As members of the Aliaxis group of companies, RX Plastics and Philmac have access to a worldwide presence and 15,000 employees dedicated to the development and supply of special plastic pipe and fitting products. Philmac has over 80 years’ experience in the design and manufacture of world leading compression fittings and valves for polyethylene pipelines for the global market. The K-Line Irrigation and Effluent solutions are supported by Philmac’s local distribution centres, Australian contact centre and dedicated sales team. INTRODUCTION TO RX PLASTICS & PHILMAC K-Line Irrigation is a revolutionary, specially formulated flexible tubing and unique patented pod sprinkler system designed to reduce the time and money spent on irrigation installation, operating and repairs. It is both power and water efficient. The heart of the system is a series of highly durable patented transportable pods. Made from advanced thermoplastics, the pod protects a sprinkler that is firmly attached to the exceptionally strong and flexible polyethylene (PE or poly) K-Pipe that resists kinking, abrasive soils, freezing, UV light and the stresses of transporting the K-Line system. K-Line is a low pressure transportable and modular irrigation system designed to distribute water with a slow, efficient absorption method similar to rain – saving time, labour and water resources. The K-Line system can be easily shifted by an ATV/quad bike or similar tow vehicle in minutes, efficiently irrigating from 1ha to more than 10,000ha. K-Line’s modular design can adapt and grow with your needs. WHAT IS THE K-LINE IRRIGATION SOLUTION? 25439_K-Line Irrigation Broch 8pp gatefold_FA.indd 1 29/01/14 5:39 PM

Transcript of RESOURCES AVAILABLE Irrigation Solutions - … · Phone +64 3 307 9081 Email [email protected]...

Proudly distributed by:

Irrigation Solutions

EASY. EFFECTIVE. EFFICIENT.

Low cost, transportable, modular irrigation system

Ph: 1800 755 899Fax: 1800 244 688www.philmac.com.au

Available From:

K-Line FarmPack A4 Flyer

K-Line Irrigation 5 pod/1 hectare kit (FarmPack) installation and user manual

K-Line Std and Mid Irrigation Product Brochure

K-Line Max Irrigation Product Brochure

K-Line Irrigation Technical Manual

RESOURCES AVAILABLE

The following resources are readily available via the Philmac website at www.philmac.com.au as well as a selection of videos on the product in use.

FARMPACK

Proudly distributed by:

ProductOverview

Proudly distributed by:Proudly distributed by:Proudly distributed by:Proudly distributed by:Proudly distributed by:Proudly distributed by:Proudly distributed by:Proudly distributed by:Proudly distributed by:Proudly distributed by:Easy. Effective. Efficient

Proudly distributed by:

K-Line Irrigation 5 Pod/1 hectare KitInstallation and user manual

RX PLASTICS LTDPO Box 360 AshburtonPhone +64 3 307 9081Email [email protected]

RX PLASTICS

K-LineTM

Std & Mid IrrigationThe grass is always greener

RX PLASTICS LTDPO Box 360 AshburtonPhone +64 3 307 9081Email [email protected]

RX PLASTICS LTDPO Box 360 AshburtonPhone +64 3 307 9081Email [email protected] September 2012

Sprinkler Options

RX PLASTICS

“K-LineTM’s so simple and doesn’t get in the way .. we can still run our stock in the same paddock while it’s operating. We can even shift it without worrying about the herd”

“I’ve never irrigated because all the equipment that was available was too labour intensive and too time consuming. Until K-LineTM came along”

“They can get into areas the big irrigators can’t

“The low application rate means we get no run-o� . It’s all absorbed”

TM

Pressure (Bar) 2.50 2.75 3.00Purple (2.5mm)(m³/hr) 1.88 1.97 2.05Diameter (metres) 34.3 34.7 35.1Orange (2.8mm)(m³/hr) 2.48 2.60 2.75Diameter (metres) 36.3 37.0 37.6Red (3.0mm)(m³/hr) 0.51 0.63 0.72Diameter (metres) 23.0 24.5 25.0Green (3.2mm)(m³/hr) 0.57 0.70 0.81Diameter (metres) 23.5 24.5 25.4Blue (3.5mm)(m³/hr) 0.66 0.81 0.93Diameter (metres) 25.0 26.0 26.0Black (4.0mm)(m³/hr) 0.85 1.03 1.18Diameter (metres) 24.0 26.0 26.0

Pressure (Bar) 3.00 4.00 5.00Blue (3.5mm)(m³/hr) 0.81 0.93 1.02Diameter (metres) 26.5 27.5 28.0Black (4.0mm)(m³/hr) 1.06 1.22 1.35Diameter (metres) 28.0 29.0 29.5Brown (4.5mm)(m³/hr) 1.29 1.50 1.65Diameter (metres) 28.5 30.0 33.0Purple (5.0mm)(m³/hr) 1.60 1.85 2.10Diameter (metres) 30.0 33.5 34.0Orange (5.5mm)(m³/hr) 1.95 2.25 2.50Diameter (metres) 32.0 34.5 36.0Red (6.0mm)(m³/hr) 2.30 2.70 3.00Diameter (metres) 33.0 35.5 36.0

Pressure and flows of the Naan 5035

Pressure (Bar) 2.50 2.75 3.00Purple (2.5mm)(m³/hr) 1.88 1.97 2.05Diameter (metres) 34.3 34.7 35.1Orange (2.8mm)(m³/hr) 2.48 2.60 2.75Diameter (metres) 36.3 37.0 37.6Red (3.0mm)(m³/hr) 0.51 0.63 0.72Diameter (metres) 23.0 24.5 25.0Green (3.2mm)(m³/hr) 0.57 0.70 0.81Diameter (metres) 23.5 24.5 25.4Blue (3.5mm)(m³/hr) 0.66 0.81 0.93Diameter (metres) 25.0 26.0 26.0Black (4.0mm)(m³/hr) 0.85 1.03 1.18Diameter (metres) 24.0 26.0 26.0

Pressure and flows of the Senninger 5023

Pressure and flows of the Nelson R20000 WF Sprinkler

Pressure and flows of the Nelson R33 Sprinkler

Pressure and flows of the Naan 5022

Sprinkler Options

K-LineTM can be shifted easily over all sorts of terrain including undulating paddocks and hillsides

“The reliability is what has impressed me”

“We have two farms - the dairy farm is 400 acres and irrigated with K-LineTM and shifting takes 2 - 2 1/2 hours. The other at 300 acres takes about an hour with better layout and � atter terrain”

“With our old system ... we were pooling water in the hollows. That’s disappeared with K-LineTM”

“K-Line’sTM fantastic on the hills. Pretty much anywhere you can go on your bike you can go with K-LineTM

“I � nd K-LineTM very easy to use. I was able to complete the installation myself. We’ve added onto it just by hooking on additional lines when we need them”

For more information or to request a brochure on our other products and services, freephone 0800 288 558 or vist our website

K-LineTM

Max Irrigation The grass is always greener ...

RX PLASTICS LTDPO Box 360 AshburtonPhone +64 3 307 9081Email [email protected]

RX PLASTICS LTDPO Box 360 AshburtonPhone +64 3 307 9081Email [email protected] 14 SEPTEMBER 2012

K-Line™ Max Irrigation TM

Sprinkler Operation• The Senninger sprinklers have a range of nozzles

from 5.43mm to 15.88mm in size • Figure 3 shows the flow rate and diameter of throw of

the K-Line™ Max70 sprinkler nozzles• Figure 4 shows the flow rate and diameter of throw of

the K-LineTM Max80 sprinkler nozzles• Complete flow rates: 2 - 20 m3/h

Figure 3. Pressure and flows of the Senninger 7025 Sprinkler

Pressure (Bar) 2.50 2.75 3.00#14 Nozzle (5.56mm)(m³/hr) 1.88 1.97 2.05Diameter (metres) 34.3 34.7 35.1#16 Nozzle (6.35mm)(m³/hr) 2.48 2.60 2.75Diameter (metres) 36.3 37.0 37.6#18 Nozzle (7.14mm)(m³/hr) 3.07 3.23 3.37Diameter (metres) 38.4 39.0 39.6#20 Nozzle (7.94mm)(m³/hr) 3.68 3.86 4.03Diameter (metres) 40.5 41.3 42.0#22 Nozzle (8.73mm)(m³/hr) 4.42 4.64 4.84Diameter (metres) 42.2 43.8 45.3#24 Nozzle (9.53mm)(m³/hr) 5.15 5.39 5.63Diameter (metres) 43.6 45.0 46.3

Pressure (Bar) 2.50 2.75 3.00#24 Nozzle (9.53mm)(m³/hr) 5.45 5.71 5.97Diameter (metres) 39.5 40.7 41.9#26 Nozzle (10.32mm)(m³/hr) 6.43 6.64 6.94Diameter (metres) 41.9 43.2 44.4#28 Nozzle (11.11mm)(m³/hr) 7.34 7.70 8.04Diameter (metres) 43.7 45.0 46.2#30 Nozzle (11.91mm)(m³/hr) 8.32 8.73 9.12Diameter (metres) 45.3 46.5 47.7#32 Nozzle (12.7mm)(m³/hr) 9.47 9.93 10.38Diameter (metres) 46.2 47.4 48.6#34 Nozzle (13.49mm)(m³/hr) 10.69 11.21 11.71Diameter (metres) 47.1 48.3 49.5#36 Nozzle (14.29mm)(m³/hr) 12.00 12.58 13.14Diameter (metres) 47.7 48.9 50.1#38Nozzle (15.08mm)(m³/hr) 12.93 13.56 14.16Diameter (metres) 48.3 49.6 50.8#40Nozzle (15.88mm)(m³/hr) - 15.20 15.88Diameter (metres) - 50.7 51.4

Production Benefits• Farmers say that K-LineTM provides them with greater

pasture growth rates • K-LineTM provides a more uniform application compared

to travelling irrigators• More grass from less water• Very flexible which allows the system to match available

water• Low cost production

Why use K-LineTM Max?• Low cost application • Cost effective• Large nozzle to eliminate blockages if waters not clean• Easily seperated by camlocks and shifted individually• Low maintenance cost

Senninger Sprinkler• The full-circle sprinklers distribute water over a large

diameter • Senninger sprinklers achieve low application rates• Outlasts and costs less than brass or aluminium

sprinklers• Built for strength and durability using high-impact

engineering-grade thermoplastics and top quality stainless steel components

• Built-in hex wrench for easy in-the-field maintenance• Standard lower bearing pipe thread:- - Senninger 8025 - 1 �” male thread - Senninger 7025 - 1” male thread• 25° angle for maximum distance of throw• Single nozzle design minimises clogging

Figure 4. Pressure and flows of the Senninger 8025 Sprinkler

Senninger 8025 Sprinkler

Senninger 7025 Sprinkler

For more information or to request a brochure on our other products and services, freephone 0800 288 558 or vist our website

RX PLASTICS LTD

PO Box 360 Ashburton

Phone +64 3 307 9081

Email [email protected]

www.rxplastics.co.nz

February 2010

K-Line™ IrrigationDesign Manual .... The grass is always greener

WHAT’S AVAILABLE IN THE K-LINE RANGE?

K-Line Standard (Std) Pod Irrigation range(430 x 230mm) offers the following selection of sprinklers:

• Naan 5022 sprinkler with nozzle sizes of 2.8 to 4.0mm, with a maximum spacing of up to 15m, a recommended working pressure of 2.5 to 3.5 bar, fl ow rate of 450 to 1100 litres/hour and diameter of 21 to 25.5m. Sprinklers are colour coded for easy identifi cation.

• Nelson R2000WF sprinkler ideal for use at wind affected sites or where the option of pressure regulation is required. Has a maximum spacing of up to 15m, a recommended working pressure of 2.75 to 4.5 bar, fl ow rate of 201 to 1295 litres/hour and diameter of 21 to 27.4m. Sprinklers are colour coded for easy identifi cation.

Also available pre-packaged with the Nelson Mini Regulator, pressure regulated to 50PSI.

• Senninger 2023 sprinkler with nozzle sizes of 3.7 to 4.76mm, with a maximum spacing of up to 20m, a recommended working pressure of 2.0 to 3.5 bar, fl ow rate range of 700 to 1619 litres/hour and a diameter range of 26 to 30m. Sprinklers are colour coded for easy identifi cation.

K-Line Mid Irrigation pod range

(560 x 290mm) provides a slightly larger pod meaning greater stability during transport offering:

• A Senninger 5023 sprinkler with nozzle sizes of 5.16 to 7.14mm, with a maximum spacing of up to 20m, a recommended working pressure of 2.5 to 3 bar, fl ow rate range of 1630 to 3260 litres/hour and a diameter range of 29.2 to 34m.

Sprinklers are colour coded for easy identifi cation.

K-Line Max Irrigation pod range(860 x 590mm) is the largest pod size offering even greater stability during transport and ability to house even larger sprinklers, offering:

• Senninger 7025 sprinkler with nozzle sizesof 5.56 to 9.53mm, with a maximum spacing of up to 40m, a recommended working pressure of 2.5 to 3.0 bar, fl ow rate range of 1880 to 5630 litres/hour and a diameter range of 34.3 to 46.3m. Sprinklers are colour coded for easy identifi cation.

• Senninger 8025 sprinkler with nozzle sizes of 9.53mm to 15.88mm, with a maximum spacing of up to 40m, a recommended working pressure of 2.5 to 3.0 bar, fl ow rate range of 5450 to 15,880 litres/hour and a diameter range of 39.5 to 51.4m. Sprinklers are colour coded for easy identifi cation.

K-Line Irrigation System Features Benefi t

Low capital cost Low capital cost to get up and running.

Easy to do Ease of installation, use and operation - making it an ideal DIY project.

Multi-terrain Suits all types of terrain.

Low pressure Low pressure requirements.

Lower power Lower power requirements than other systems.

Expandable Modular system that can grow with your needs.

Movable Transportable and able to cover a large area by shifting using a quad bike or ATV.

Economical Low maintenance costs as the only moving parts are the sprinklers, pipe, pumps and valves.

Simply scan the code with your smart phone to see how easy it is to move the K-Line Pod System.

RX Plastics is New Zealand’s leading manufacturer of irrigation products, pipe and effl uent dispersal systems.

With over 30 years’ experience, RX Plastics has a strong innovation focus and dedication to high quality thermoplastic solutions for water transport and dispersion.

The RX Irrigation and Effl uent solutions are proudly distributed in Australia by Australian manufacturer and distributor, Philmac.

As members of the Aliaxis group of companies, RX Plastics and Philmac have access to a worldwide presence and 15,000 employees dedicated to the development and supply of special plastic pipe and fi tting products.

Philmac has over 80 years’ experience in the design and manufacture of world leading compression fi ttings and valves for polyethylene pipelines for the global market. The K-Line Irrigation and Effl uent solutions are supported by Philmac’s local distribution centres, Australian contact centre and dedicated sales team.

INTRODUCTION TO RX PLASTICS & PHILMAC

K-Line Irrigation is a revolutionary, specially formulated fl exible tubing and unique patented pod sprinkler system designed to reduce the time and money spent on irrigation installation, operating and repairs. It is both power and water effi cient.

The heart of the system is a series of highly durable patented transportable pods. Made from advanced thermoplastics, the pod protects a sprinkler that is fi rmly attached to the exceptionally strong and fl exible polyethylene (PE or poly) K-Pipe that resists kinking, abrasive soils, freezing, UV light and the stresses of transporting the K-Line system.

K-Line is a low pressure transportable and modular irrigation system designed to distribute water with a slow, effi cient absorption method similar to rain – saving time, labour and water resources. The K-Line system can be easily shifted by an ATV/quad bike or similar tow vehicle in minutes, effi ciently irrigating from 1ha to more than 10,000ha. K-Line’s modular design can adapt and grow with your needs.

WHAT IS THE K-LINE IRRIGATION SOLUTION?

FIRST REVEAL - RIGHT BACK COVER FRONT COVER FIRST REVEAL - LEFT

25439_K-Line Irrigation Broch 8pp gatefold_FA.indd 1 29/01/14 5:39 PM

Naan 5022SD

Pressure (Bar) 2.50 3.00

Red (3.0mm)

(m³/hr) 0.57 0.63

Diameter (metres) 21.0 22.0

Green (3.2mm)

(m³/hr) 0.64 0.70

Diameter (metres) 21.2 22.2

Blue (3.5mm)

(m³/hr) 0.74 0.81

Diameter (metres) 23.0 23.0

Black (4.0mm)

(m³/hr) 0.95 1.03

Diameter (metres) 23.2 24.2

WET

DRY

WET

WET

DRY

Riser Riser

Feed LineFeed Line

Pod Line

Pod Line

WET

- IR

RIG

ATED

DRY

- UNI

RRIG

ATED

Riser

DRY

K-Line

Feed Line

WET

DRY

WET

WET

DRY

Riser Riser

Feed LineFeed Line

Pod Line

Pod Line

WET

- IR

RIG

ATED

DRY

- UNI

RRIG

ATED

Riser

DRY

K-Line

Feed Line

EXAMPLES OF SHIFTING THE K-LINE

You can shift K-Line Irrigation by hand or with an ATV, heavy duty lawn tractor, golf cart, Gator, or similar tow vehicle.

Position the tow vehicle along side and remain 2 to 2.5m from the K-Line as you tow it downfi eld to the next set. Shifting the K-Line while the sprinklers are in operation is preferred.

Full installation and operation instructions, both in printed and DVD formats, are supplied with the purchase of a K-Line 5 Pod / 1 hectare Kit.

Shifting from Set 1 to Set 2Step 1 Step 2 Step 3 (set 2)

Shifting from Set 2 to Set 3Step 1 (set 2) Step 2 Step 3

Compact ImpactSprinkler Base Pressure (psi)

30 35 40 45 50 Sprinkler Base Pressure (bar)

2.07 2.42 2.76 3.11 3.45

#9 Nozzle - Grey [9/64”] #9 Nozzle - Grey [3.57mm]

Flow (gpm) 3.08 3.33 3.56 3.78 3.98 Flow (L/hr) 700 756 809 859 904

Diameter at 1.5’ ht. (ft) 78 78 82 86 86 Diameter at 0.5m ht (m) 24 24 25 26 26

Diameter at 3.0’ ht (ft) 84 86 87 88 90 Diameter at 0.9m ht (m) 26 26 27 27 27

#10 Nozzle – Turquoise (5/32”) #10 Nozzle - Turquoise (3.97mm)

Flow (gpm) 3.82 4.13 4.41 4.68 4.93 Flow (L/hr) 868 938 1002 1063 1120

Diameter at 1.5’ ht. (ft) 80 82 82 86 88 Diameter at 0.5m ht (m) 24 25 25 26 27

Diameter at 3.0’ ht (ft) 86 87 89 91 92 Diameter at 0.9m ht (m) 26 27 27 28 28

#11 Nozzle – Yellow (11/64”) #11 Nozzle - Yellow (4.37mm)

Flow (gpm) 4.63 5.00 5.34 5.67 5.98 Flow (L/hr) 1052 1136 1213 1288 1358

Diameter at 1.5’ ht. (ft) 82 82 86 88 90 Diameter at 0.5m ht (m) 25 25 26 27 27

Diameter at 3.0’ ht (ft) 88 89 92 94 95 Diameter at 0.9m ht (m) 27 27 28 29 29

#12 Nozzle – Red (3/16”) #12 Nozzle - Red (4.76mm)

Flow (gpm) 5.52 5.97 6.37 6.76 7.13 Flow (L/hr) 1254 1356 1447 1535 1619

Diameter at 1.5’ ht. (ft) 83 87 90 92 96 Diameter at 0.5m ht (m) 25 27 27 28 29

Diameter at 3.0’ ht (ft) 89 91 94 97 98 Diameter at 0.9m ht (m) 27 28 29 30 30

Sprinkler performance may vary with fi eld conditions. Diameters shown for standard stream straightening vane (white). Other nozzles and/or vane combinations are available, consult factory for specifi c performance data. Stream heights range from 7.7 - 10.1 ft [2.3 - 3.1 m] above nozzle based on pressure and nozzle size. Minimum recommended riser height is 1.5 ft [0.5 m]. Also available in 1/2” NPT model.

Nelson R20000 WFPlate / Nozzle Options and Flow Performance in LP

Plate options* Recommended NozzlesBar

2.75 3.0 3.5 4.0 4.5

Green WF14

Radius: 38 - 41 feet#14 Green (7/64) 487 509 550 590 626

(11.9 - 12.5 metres)

Red WF16

Radius: 40 - 42 feet #15 Tan (15/128) 574 597 647 695 737

(12.2 - 12.8 metres) #16 Red (1/8) 655 385 739 792 837

Gold WF18

Radius: 41 - 43 feet#18 Gold (9/64) 834 869 940 1001 1060

(12.5 - 13.1 metres)

Dark Brown WF20

Radius 42 - 45 feet#20 Dark Brown *** 1016 1062 1144 1222 1295

(12.8 - 13.7 metres)

Senninger 5023Pressure (Bar) 2.50 2.75 3.00

Purple (2.5mm)

(m³/hr) 1.88 1.97 2.05

Diameter (metres) 34.3 34.7 35.1

Orange (2.8mm)

(m³/hr) 2.48 2.60 2.75

Diameter (metres) 36.3 37.0 37.6

Red (3.0mm)

(m³/hr) 0.51 0.63 0.72

Diameter (metres) 23.0 24.5 25.0

Green (3.2mm)

(m³/hr) 0.57 0.70 0.81

Diameter (metres) 23.5 24.5 25.4

Blue (3.5mm)

(m³/hr) 0.66 0.81 0.93

Diameter (metres) 25.0 26.0 26.0

Black (4.0mm)

(m³/hr) 0.85 1.03 1.18

Diameter (metres) 24.0 26.0 26.0

Naan 5035 Pressure (Bar) 3.00 4.00 5.00

Blue (3.5mm)

(m³/hr) 0.81 0.93 1.02

Diameter (metres) 26.5 27.5 28.0

Black (4.0mm)

(m³/hr) 1.06 1.22 1.35

Diameter (metres) 28.0 29.0 29.5

Brown (4.5mm)

(m³/hr) 1.29 1.50 1.65

Diameter (metres) 28.5 30.0 33.0

Purple (5.0mm)

(m³/hr) 1.60 1.85 2.10

Diameter (metres) 30.0 33.5 34.0

Orange (5.5mm)

(m³/hr) 1.95 2.25 2.50

Diameter (metres) 32.0 34.5 36.0

Red (6.0mm)

(m³/hr) 2.30 2.70 3.00

Diameter (metres) 33.0 35.5 36.0

Senninger 8025 Pressure (Bar) 2.50 2.75 3.00

#24 Nozzle (9.53mm)

(m³/hr) 5.45 5.71 5.97

Diameter (metres) 39.5 40.7 41.9

#26 Nozzle (10.32mm)

(m³/hr) 6.43 6.64 6.94

Diameter (metres) 41.9 43.2 44.4

#28 Nozzle (11.11mm)

(m³/hr) 7.34 7.70 8.04

Diameter (metres) 43.7 45.0 46.2

#30 Nozzle (11.91mm)

(m³/hr) 8.32 8.73 9.12

Diameter (metres) 45.3 46.5 47.7

#32 Nozzle (12.7mm)

(m³/hr) 9.47 9.93 10.38

Diameter (metres) 46.2 47.4 48.6

#34 Nozzle (13.49mm)

(m³/hr) 10.69 11.21 11.71

Diameter (metres) 47.1 48.3 49.5

#36 Nozzle (14.29mm)

(m³/hr) 12.00 12.58 13.14

Diameter (metres) 47.7 48.9 50.1

#38 Nozzle (15.08mm)

(m³/hr) 12.93 13.56 14.16

Diameter (metres) 48.3 49.6 50.8

#40 Nozzle (15.88mm)

(m³/hr) - 15.20 15.88

Diameter (metres) - 50.7 51.4

Senninger 7025 Pressure (Bar) 2.50 2.75 3.00

#14 Nozzle (5.56mm)

(m³/hr) 1.88 1.97 2.05

Diameter (metres) 34.3 34.7 35.1

#16 Nozzle (6.35mm)

(m³/hr) 2.48 2.60 2.75

Diameter (metres) 36.3 37.0 37.6

#18 Nozzle (7.14mm)

(m³/hr) 3.07 3.23 3.37

Diameter (metres) 38.4 39.0 39.6

#20 Nozzle (7.94mm)

(m³/hr) 3.68 3.86 4.03

Diameter (metres) 40.5 41.3 42.0

#22 Nozzle (8.73mm)

(m³/hr) 4.42 4.64 4.84

Diameter (metres) 42.2 43.8 45.3

#24 Nozzle (9.53mm)

(m³/hr) 5.15 5.39 5.63

Diameter (metres) 43.6 45.0 46.3

K-LINE POD IRRIGATION COMPONENTS

Number Element K-Line Standard K-Line Mid K-Line Max

1 Sprinkler Naan 5022## Naan 5035 Senninger 7025

1 Sprinkler Senninger compact Senninger 5023 Senninger 8025

1 Sprinkler Nelson R2KWF Senninger compact N/A

2 Saddle 40 or 45mm KLTPS 40 or 45 KLTPS 63x 25mm tapping saddle

3 Male Camlock N/A N/A 2" males x FI BSP

4 Female Camlock N/A N/A 2" Females x FI BSP

5 Adaptor Naan Adaptor Mid Adaptor Sen70 or 80. adaptor

6 U-Bolt UBSS3240 UBSS3240 UBSS63

7 LD Pipe 40 or 45mm LD 40 or 45mm LD 40 or 45mm 800 x50mm PP riser

8 K-Line Male Coupling 40/45mm x 11/2” Coupling 40/45mm x 11/2" Coupling N/A

NB: Tow Hooks, Sprinkler Nozzle colour, Pipe fi ttings, Stock guards and camlocks to be added.NB: Max pods come with manifold complete (ie. camlocks, tapping saddle, riser). Sprinkler and adaptor need to be added.

Naan 5022

2.5 - 4.0mm

nozzles

0.35m3/h -1.18m3/h

K-Line™

Tapping saddle

40mm

Cam38A

- Male camlock adaptor x

1 ½” BSP female thread

Cam38D

- Female camlock coupling x

1 ½” BSP female thread

1 5

6

7

1 x Naan adaptor

- ½ male and female

specifi cally for the

Naan sprinkler

1 x U Bolts

2 x Nuts

2 x Washers

RX PP Riser

for 800mm x 50mm thread,

both ends

K-Line™ Male Coupling

40mm x 1 ½” BSP Thread

1

2

4 73

4

8

5

6

8

2

3

PRODUCT LISTING

PRODUCT NO. DESCRIPTION

K-LINE FARM PACK 1 HECTARE KIT-COMPLETE

KLSS32FARMPACK

K-LINE PODS COMPLETE WITH NAAN SPRINKLER

KL40NAANPR K-Line 40mm NAAN 5022 SPKLR purple

KL40NAANOR K-Line 40mm NAAN 5022 SPKLR orange

KL40NAANRD K-Line 40mm NAAN 5022 SPKLR red

KL40NAANGN K-Line 40mm NAAN 5022 SPKLR green

KL40NAANBU K-Line 40mm NAAN 5022 SPKLR blue

KL40NAANBK K-Line 40mm NAAN 5022 SPKLR black 32mm ID and 45mm ID options also available on request

K-LINE PODS COMPLETE WITH NELSON SPRINKLER

KL40NELGNGN K-Line 40mm NEL R2KWF SPKLR grn grn

KL40NELRDTN K-Line 40mm NEL R2KWF SPKLR red tan

KL40NELRDRD K-Line 40mm NEL R2KWF SPKLR red red

KL40NELGDGD K-Line 40mm NEL R2KWF SPKLR gld gld

KL40NELBNBN K-Line 40mm NEL R2KWF SPKLR brn brn 32mm ID and 45mm ID options also available on request

K-LINE PODS COMPLETE WITH NELSON SPRINKLERPRESSURE REGULATED 50PSI

KL40NR50GNGN K-Line 40mm NEL R2KWF 50PSI SPKLR green green

KL40NR50RDTN K-Line 40mm NEL R2KWF 50PSI SPKLR red tan

KL40NR50RDRD K-Line 40mm NEL R2KWF 50PSI SPKLR red red

KL40NR50GDGD K-Line 40mm NEL R2KWF 50PSI SPKLR gold gold

KL40NR50BNBN K-Line 40mm NEL R2KWF 50PSI SPKLR brown brown 32mm ID and 45mm ID options and 40 and 45psi nelson options also available on request

K-LINE PODS COMPLETE WITH SENNINGER COMPACT SPRINKLERS

KL40SENCOMRD K-Line 40mm Senninger 2023 Red

KL40SENCOMYE K-Line 40mm Senninger 2023 Yellow

KL40SENCOMTQ K-Line 40mm Senninger 2023 Turquoise

KL40SENCOMGR K-Line 40mm Senninger 2023 Green

K-LINE EFFLUENT PODS COMPLETE WITH SENNINGER SPRINKLERS

KLMAX8025SEN K-line Max Effl uent Pod Senninger 8025

KLMAX7025SEN K-line Max Effl uent Pod Senninger 7025

KLMID5023SEN K-line Mid Effl uent Pod Senninger 5023

PIPE

LD40100 K-Line 40mm X 100m LD Polypipe

LD40150 K-Line 40mm X 150m LD Polypipe

LD45125 K-Line 45mm X 125M LD Polypipe

KPIPE6340 Coils 63mm K-Pipe

PRODUCT NO. DESCRIPTION

SPARE PARTS

KLFC40 K-Line Female Coupling 40mm

KLMC40 K-Line Male Coupling 40mm

KLSC40 K-Line Straight Coupling 40mm

KLTPS40 K-Line 40mm Tapping Saddle

NAAN-ADAPTOR K-Line Naan Adapter

NAANSHAFT K-Line Naan 5022 spklr shaft

NELSON-ADAPT K-Line Nelson spklr adapter

RXGHC40 K-Line 40mm Galvanised hook cap

UB40 K-Line 40mm ss U-Bolt (old)

UBSS32/40 K-Line 32mm 40mmss U-Bolt

KLPRV4030 K-Line Pressure reducing valve 30m Spring

KLPRV4035 K-Line Pressure reducing valve 35m Spring

KLPRV4040 K-Line Pressure reducing valve 40m Spring

KLPRV4045 K-Line Pressure reducing valve 45m Spring

NAAN5022BLK NAAN 5022 Sprinkler with black nozzle

NAAN5022RED NAAN 5022 Sprinkler with red nozzle

NAAN5022BLU NAAN 5022 Sprinkler with blue nozzle

NAAN5022GRN NAAN 5022 Sprinkler with green nozzle

NAAN5022ORG NAAN 5022 Sprinkler with orange nozzle

NELR2KWFBR-BR Nelson R2000WF Sprinkler Brown-Brown

NELR2KWFGL-GL Nelson R2000WF Sprinkler Gold-Gold

NELR2KWFGR-GR Nelson R2000WF Sprinkler Green-Green

NELR2KWFRD-RD Nelson R2000WF Sprinkler Red-Red

NELR2KWFRD-TN Nelson R2000WF Sprinkler Red-Tan

NELMR40PSI Nelson Mini Regulator 40PSI

NELMR45PSI Nelson Mini Regulator 45PSI

NELMR50PSI Nelson Mini Regulator 50PSI

NELS-NIPPLE Nelson Nipple for Regulator

NREGR2KWF-40 Nelson Connection for Regulator 40mm

NELR2KWF-40 Nelson Connector 40mm

KLSGNEW K-Line Stockgaurd

KLQRRSEN70 Quick release riser for Sen70

KLQRRSEN80 Quick release riser for Sen80

KL63CAMHOOK51B KL63.camhook51

MIDADAPTOR MID.ADAPTOR

NAAN5035RED Naan 5035 Sprinkler

KLMID25KIT Bike shift kit

KLSGMID KL MID STOCK GAURD

KLTPS32 K-Line 32mm Tapping Saddle

* Freight - for all pod/pipe orders freight into store is an additional charge.

# Indicates the product is not a stock item, and will be ordered in by requestProduct codes without a symbol indicates the product is available as a stock item from the local Philmac branch.Note that this is to be treated as a guide only, and stock status may differ between Philmac state distribution centres in line with local market preferences.

25439_K-Line Irrigation Broch 8pp gatefold_FA.indd 2 29/01/14 5:40 PM