Residential Internal Doors Solid Style 86462 En
description
Transcript of Residential Internal Doors Solid Style 86462 En
-
Residential Internal Doors SolidStyleFlush-Closing Timber Internal Doors and All-Glass Doors with Steel Frame
Flush-fitting look with timber door leaf and steel frame
-
Hrmanns residential internal doors will convince you with a high-quality look and premium quality. Their flush-fitting door leaf and frame as well as their concealed hinges give the doors an elegant and attractive appearance. The extremely resistant door leaf and robust steel frame are characteristics of proven Hrmann brand quality, made in Germany. You can enjoy this product for years to come because you are literally choosing a door for life.
Residential Internal DoorsExclusive look with robust steel frames
2
-
YEARWarranty
Quality products from GermanyAll door components are developed and produced in-house at Hrmann. Our highly qualified employees work intensively on new products, continual further developments and improvements to details. Patents and unique products on the market are the result of this. Endurance tests under real conditions ensure mature series products with Hrmann quality.
An eye on the futureHrmann is setting a good example. This is why, from 2013 onwards, the company will obtain up to 40 % of its required energy from green sources and will continue to increase this percentage. At the same time, many tonnes of CO are saved each year thanks to the introduction of an intelligent and certified energy management system. And last but not least, Hrmann offers products for sustainable construction.
Certified brand qualityQuality management system in accordance with DINISO9001Hrmann internal door production is DINISO9001 certified and RAL quality tested. This is another proof of Hrmanns motto Quality without compromise.
Shown left: Door leaf in Pure white RAL9010 with four window sections, frame in Pure white RAL9010, optional lever handle HW-Square
Long-lasting. Guaranteed.We are convinced of our products and our uncompromised quality assurance. That is why we issue a 10-year guarantee on all Hrmann residential internal doors.
Made in Germany
* The complete warranty conditions can be found at: www.hoermann.com
All rights reserved. No part may be reproduced without our prior permission. Subject to changes.
3
-
Solid composite timber door leafThe 42-mm-thick solid composite timber door leaf is equipped with a 4-sided all-round plywood reinforcement frame and a concealed solid timber edge band . The advantages when compared to door leaves with honeycomb inserts or tubular chipboard: The door leaf does not warp and is well suited for high traffic use (class4).
The door is equipped with a high-quality HDF top plate (acc. to DINEN622-3). The top plate comes painted in Pure white RAL9010 or with transparent paint for wood veneers.
Double-shell profile frameWith 2mm galvanized sheet metal, the frame is particularly robust. The doors are available with a double-shell profile frame that is well suited for retrofitting into lightweight and solid construction walls. As standard, the door is supplied with a TPE sound-absorbing seal in white, or optionally in grey or black.
As standard, the frames are galvanized, primed and given a final silk matt powder-coat in Pure white RAL9010.
Long-lasting timber door leaf
Robust steel frame21
Good Reasons to Try HrmannConstruction project quality makes all the difference
Door leaves with tubular chipboard are not suitable for high traffic use.
4
-
Door leaf and frame in flush-fitting finishThe flush-closing door leaf and the frame create an elegant, flush-fitting door appearance.
Frames with invisible mitresThe corner joints of the steel frames feature high-quality welding and a flush polish, meaning there are no visible mitre cuts as with most timber frames.
Timber frame lookThe width of the visible frame, the so-called frame face, is 55mm on both sides. This corresponds to the frame geometry of a timber door so that the doors can be integrated harmoniously into your residential space.
High-quality final coatingThe door leafs surface finish is a high-quality paint that effectively protects the top layer and the veneer.The special end coating of the frame makes the colour surface particularly resistant, meaning in comparison to timber frames, the frame can withstand accidents with toy cars or run-ins with hard objects.
Colour coating to chooseOn request, the door leaf and frame are also available in almost all RAL colours. Various colour combinations for door leaf and frame are possible.
Because the door leaf and frame are made of different materials, there may be a slight difference in colour with matching RAL colours.
Harmonious overall appearance
Resistant surface finishes3 4
All door leaves* are sustainably produced and PEFC certified.
* Except for the Limba, Zebrano and Makore veneers
Disturbing appearance owing to visible mitres
5
-
Door leaf with Walnut veneer surface, frame in Pure white RAL9010, standard lever handle HW-Caro
Concealed hinges
Integrated glazing
Quiet lock
Flush-fitting stainless steel lock plate
High-Quality EquipmentConvincing details
6
-
Concealed hingesThe hinges as well as the screws are concealed, giving the door an elegant look. Furthermore, the 3-way adjustable hinges can be adjusted variably so that your door always closes smoothly and securely. VX guide rollers are also available optionally in stainless steel.
Harmoniously integrated glazingsWould you like your internal door with glazing to let more light into your home? Then select between three different versions, as standard with plastic film matted glass on the inside and elegant rounded glazing beads.
Lever handle set with ball bearingThe high quality stainless steel L-shaped lever handle set ensures frictionless and precise rotation; approved in Hrmanns long duration testing with 1million actuations!
Quiet lockThe doors are equipped with a mortice lock, class3 with low-noise latch, acc. to DIN18251-1. As an alternative to the standard version without key insert, the doors can be ordered or retrofitted with a closing cylinder or WC closing system.
Flush-fitting lock plateThe lock plate is made of high-quality stainless steel and is integrated perfectly into the frame. This protects the frame, allowing you to enjoy Hrmanns high brand quality for a long time to come.
Double-leaf versionThe residential internal doors are also available as a double-leaf version with lockable fixed leaf. You determine the distribution of the traffic and fixed leaves according to your wishes. For a harmonious door appearance, both the transitions from the door leaf to the steel frame and from the traffic leaf to the fixed leaf are flush-fitting.
Perfectly matched to each other a complete door set from a single source
With one window section
With three window sections
With four window sections
Optional window sections for all composite timber doors
7
-
All in WhitePlain and simply elegant
8
-
Door leaf and frame in Pure white RAL9010, standard lever handle HW-Caro
Shown left: Door leaf and frame in Pure white RAL9010, standard lever handle HW-Caro
Door leaf in Pure white RAL9010 with three window sections, plastic film matting on the inside, frame in Pure white RAL9010, optional lever handle HW-Square
Additional glass variants can be found on page 17.
9
-
Naturally BeautifulIn a cosy timber look
Door leaf with Bamboo veneer surface, frame in Pure white RAL9010, optional lever handle HW-Rondo
Door leaf with Knotty Oak veneer surface, frame in Pure white RAL9010, optional lever handle HW-Rondo
Shown above right: Door leaf with Zebrano veneer surface, frame in Pure white RAL9010, standard lever handle HW-Caro
10
-
Take Your PickWood veneers in 17 equally-priced variants
Beech
Limba
Alder
WalnutMakore
Knotty Oak
Ash
Swiss Pear
Sapeli
Plain Pine
BirchBirch
Zebrano
Natural Oak
Sycamore Maple
American Cherry Tree
Hard Maple
Bamboo
All wood veneer variants on this page are available in both longitudinal and horizontal grains.
11
-
For all composite timber door leavesIf it comes down to square meters, sliding doors are an ideal solution. As a space-saving solution, all Hrmann composite timber door leaves are also available as sliding doors that run in front of the wall. The corresponding double-shell profile frame surrounds the brickwork, giving it optimal protection in the passage area. The sliding door fitting is long-lasting and moves very easily. On request, it is also available with soft stop on one or both sides.
Extra Comfort in Limited SpaceSliding doors, a space-saving solution
The profile frame in the passage protect the brickwork.12
-
Door leaf and frame in Pure white RAL9010, standard recessed handle
13
-
Your Style, Your WaySo that your door goes perfectly with your home
14
-
Lever handle HW-Rondo, matt stainless steel
Lever handle HW-Caro, matt stainless steel
Lever handle HW-Square, matt stainless steel
Lever handle HW-Curve, matt stainless steel
Optional cylinder rose escutcheons, prepared for deadlock / profile cylinder, matt stainless steel
Optional cylinder rose escutcheons, prepared for deadlock / profile cylinder, matt stainless steel
Optional WC cylinder rose escutcheon, matt stainless steel
Optional WC cylinder rose escutcheon, matt stainless steel
Lever handle HW-Swing, matt stainless steel
Standard lever handle setsLever handle sets with ball bearingsAll Hrmann residential internal doors are equipped with lever handle sets that feature innovative ball bearing technology. Your advantage: The ball bearings made of hardened steel ensure frictionless and precise rotation; approved in Hrmanns long duration testing with 1million actuations. Hrmann guarantees 30 years of flawless function for all lever handle brands with original Hrmann ball bearing systems.
Optional cylinder rose escutcheonsAll residential internal doors can be equipped with the cylinder rose escutcheons listed below, on request also with a WC closing system.
All lever handles and cylinder rose escutcheons are also available optionally in flush-fitting versions.
Optional lever handle set
Shown left: Door leaf with Bamboo veneer surface, frame in Pure white RAL9010, optional lever handle HW-Rondo
15
-
All-Glass DoorsQuiet, secure and stylish
With 8mm safety glassHrmanns all-glass doors create a distinctive, stylish accent. The doors made of 8mm safety glass (single-pane safety glass) are equipped with high-quality, 3-part stainless steel hinges, a lock with low-noise latch and stainless steel lock plates. You can also optionally choose adjustable VX hinges made of stainless steel. The TPE sound-absorbing seal ensures quiet and tight closing. The door is supplied with a double-shell steel profile frame in Pure white RAL9010.
Door leaf with complete satin finish, frame in Pure white RAL9010, standard lever handle HW-Caro
On request, the frames are also available in almost all RAL colours.
16
-
Door leaf with satin finish and clear stripes, frame in Pure white RAL9010, standard lever handle HW-Caro
Shown above left: Door leaf with complete satin finish, frame in Pure white RAL9010, optional lever handle HW-Swing
Clear glass (single-pane safety glass)
Satin finish (single-pane safety glass) with all-glass doors, plastic film matting on the inside (laminated safety glass) with doors with glazing frames
Mastercarr (single-pane safety glass)
Pave, white (single-pane safety glass)
Glass variants for all-glass doors or doors with glazing frame
17
-
All dimensions inmm
Dimensions and Fitting Data
All-glass doors with steel frame
Composite timber doors with steel frame
Size range
Ordering sizes (nominal sizes) Overal dimensions of door leaf
750 2000 709 1972
750 2125 709 2097
875 2000 834 1972875 2125 834 20971000 2000 959 19721000 2125 959 20971125 2000 1084 19721125 2125 1084 2097
Size range
Ordering sizes (nominal sizes) Overall dimensions of door leaf
750 2000 709 1972
750 2125 709 2097
875 2000 834 1972875 2125 834 20971000 2000 959 19721000 2125 959 20971125 2125 1084 2097
Horizontal view
Horizontal view
Vertical view
Vertical view
Nominal size = opening size
Nominal size = opening size
Nominal size of the structural opening
Nominal size of the structural opening
Nom
inal
siz
e =
ope
ning
siz
eNo
min
al s
ize
= o
peni
ng s
ize
Nom
inal
siz
e of
the
stru
ctur
al o
peni
ngNo
min
al s
ize
of th
e st
ruct
ural
ope
ning
Overall door leaf dimension
Overall door leaf dimension
Over
all d
oor l
eaf d
imen
sion
Over
all d
oor l
eaf d
imen
sion
Frame hold dimension
Frame hold dimension
Fram
e ho
ld d
imen
sion
Fram
e ho
ld d
imen
sion
Wal
l wid
thW
all w
idth
Wal
l wid
thW
all w
idth
Wall width
Wall width
1515
1515
15
15
1515
1515
15
15
17
17
17
17
1717
77
3.5
3.5
55
55
55
55
3.5
3.5
44
55
Clear passage dimension
Clear passage dimension
Clea
r pas
sage
dim
ensi
onCl
ear p
assa
ge d
imen
sion
55
555 5
55
55
5555
5555
5 5
FFL
FFL
18
-
Frame types
Composite timber doors All-glass doors Sliding doors
Standard frame Standard frame Standard frameSpecial frame with radii
Special frame with radii
Special frame with radii
All dimensions inmm
Composite timber sliding doors with steel frame
Size range
Ordering sizes (nominal sizes) Clear passage
750 2000 686 1968
750 2125 686 2093875 2000 811 1968875 2125 811 20531000 2000 1061 19681000 2125 936 20931125 2125 1061 2093
Horizontal view
Vertical view
55 (standard) 55 (standard) 55 (standard)
15 15 1515 15 1555 (standard) 55 (standard) 3055 (standard) 55 (standard) 30
55 (standard) 55 (standard) 55 (standard)30 115 40 115 40 115
40 100 40 10050 100 50 100
35 115 45 115 45 115
15 15 1518 18 18
R 10R 10
R 10R 10
R 10
R 10
R 10
R 10
47
30.5
47
30.5
2215 15 1518 18 15
MW
MW
MWMW
MW
MW
Nominal size = opening sizeNominal size of the structural opening
Nom
inal
siz
e =
ope
ning
siz
eNo
min
al s
ize
of th
e st
ruct
ural
ope
ning
Overall door leaf dimension
Over
all d
oor l
eaf d
imen
sion
Frame hold dimension
Opening sense
Clea
r pas
sage
dim
ensi
onBe
am p
anel
he
ight
Wal
l wid
th
Wal
l wid
th
Wall width
1570
15
15
15 15
15
1728
17
8
46.5 456
15
Clear passage dimension
Clea
r pas
sage
dim
ensi
on
555 5
55
555 32
FFL
19
-
Hrmann: Quality without Compromise
Hrmann is the only manufacturer worldwide that offers you
a complete range of all major building products from one source.
We manufacture in highly-specialised factories using the latest
production technologies. The close-meshed network of sales
and service companies throughout Europe, and activities in the
USA and China, make Hrmann your strong partner for first-class
building products, offering Quality without Compromise.
GARAGE DOORS
OPERATORS
INDUSTRIAL DOORS
LOADING EQUIPMENT
HINGED DOORS
DOOR FRAMES
Hrmann KG Amshausen, Germany
Hrmann KG Dissen, Germany
Hrmann KG Werne, Germany
Hrmann Beijing, China
Hrmann KG Antriebstechnik, Germany
Hrmann KG Eckelhausen, Germany
Hrmann Genk NV, Belgium
Hrmann Tianjin, China
Hrmann KG Brandis, Germany
Hrmann KG Freisen, Germany
Hrmann Alkmaar B.V., Netherlands
Hrmann LLC, Montgomery IL, USA
Hrmann KG Brockhagen, Germany
Hrmann KG Ichtershausen, Germany
Hrmann Legnica Sp. z o.o., Poland
Hrmann Flexon, Leetsdale PA, USA
Issu
e12
.201
2 / P
rint1
2.20
12 /
HF8
6462
EN
/ PDF
ww
w.h
oerm
ann.
com