REQUEST FOR PROPOSAL(S) FOR THE CITY OF …gov.findrfp.com/docs/19044_Park_Security_RFP.pdf ·...

City of Mt. Juliet Finance Department 2365 N. Mt. Juliet Rd Mt. Juliet, TN

Phone 615-754-2554 Fax 615-754-7225

REQUEST FOR PROPOSAL(S)

FOR THE CITY OF MT. JULIET, TN

Request for Proposal for Security Cameras System for City Parks

Issued By:

City of Mt. Juliet, TN

2365 N. Mt. Juliet Rd.

(615) 754-2554

Date of Issue: February 26, 2013

Proposal Due Date: March 13, 2013 Time 2:00PM CDT

Proposals must be in sealed envelope

Clearly Marked “Security Camera System for City Parks”

Dated “February 26, 2013”

Delivered to:

Attn: Finance Director

City of Mt. Juliet

2365 N. Mt. Juliet

Mt. Juliet, TN 37122

NLT 2:00PM CDT 03/13/13


Phone 615-754-2554 Fax 615-754-7225

Background of the City of Mt. Juliet, TN

The City of Mt. Juliet, TN is located in the Nashville, TN metropolitan area. The city had a

population of 24,548 according to the US decennial census of 2010 and is one of the fastest

growing cities in the State of Tennessee. The city has 4 elected commissioners and an elected

mayor, which comprise the governing body. The governing body hires a professional City

Manager as the chief administrative official. The City Manager is responsible for all city

personnel. The city currently provides public safety, building inspection and codes enforcement,

public works, parks and recreation, and administrative functions.

General Bid Information

Sealed proposals for Security Cameras will be received at the office of the City of Mt. Juliet

Finance Department at 2365 N. Mt. Juliet Rd, Mt. Juliet, Tennessee 37122, Attention: John

Rossmaier, on or before 2:00 PM on March 13, 2013, and immediately thereafter all bids will be

publicly opened and read aloud. Please contact John Rossmaier at 615-773-6255 should you

have any questions.

PROPOSAL FORMS

Two paper copies of the proposal are required; one electronic copy of proposal in PDF format is

preferred but not required unless the proposal exceeds 10 pages which may be on disk or flash

drive. All proposals must have the name of the proposal, and the proposal due date when

applicable on the outside of the envelope. Bid must be signed by authorized representative of

company/business placing bid at time bid is received by the City of Mt. Juliet.

SUBMISSION

It shall be the responsibility of the bidder to submit a bid response which complies with: the

conditions and specifications of the Request for Proposal (Quote); policies and procedures of the

City of Mt. Juliet and applicable laws of the State of Tennessee: and any other applicable laws,

regulations and requirements. Bidder will show evidence of license, expiration date and

classification if required and when applicable.


Phone 615-754-2554 Fax 615-754-7225

BID REJECTION

The City reserves the right to reject any or all quotes, combinations of items, or lot(s),

and to waive defects or minor informalities. The City is a member of certain coalitions and has

access to the pricing provided by state contracts. The published prices by the state or any of the

coalitions for RFQ items shall be considered a sealed bid which the City may accept. Any other

bid that is not sealed will “NOT” be accepted. Any bid received after time and date indicated will

be discarded.

Proposers may not restrict the rights of the City or otherwise qualify their proposals.

If a Proposer does so, the City may determine the proposal to be a nonresponsive counteroffer,

and the proposal may be rejected.

The City reserves the right, at its sole discretion, to waive variances in proposals provided

such action is in the best interest of the City. Where the City waives minor variances in

proposals, such waiver does not modify the RFP requirements or excuse the Proposer from full

compliance with the RFP. Notwithstanding any minor variance, the City may hold any Proposer

to strict compliance with the RFP. In the event of multiple line items or interchangeable items,

the city reserves the right to select items from multiple proposers.

Proposers must comply with all of the terms of this RFP and all applicable state laws and

regulations. The City may reject any proposal that does not comply with all of the terms,

conditions, and performance requirements of this RFP.

PAYMENT FOR CITY PURCHASES

Purchase orders will be issued after the RFP is reviewed and payment will be made by the City

of Mt. Juliet 30 days after commodities and/or services have been received, accepted, and

properly invoiced as indicated in the contract and/or purchase order. Invoices must bear the

purchase order number where applicable.

IDEMNIFICATION

The Contractor/Vendor shall indemnify, hold harmless, and defend the contracting agency from

and against any claim of, or liability for error, omission or negligent act of the

Contractor/Vendor under this agreement. The Contractor/Vendor shall not be required to

indemnify the contracting agency for a claim of, or liability for, the independent negligence of

the contracting agency. If there is a claim of, or liability for, the joint negligent error or omission

of the Contractor and the independent negligence of the Contracting agency, the indemnification

and hold harmless obligation shall be apportioned on a comparative fault basis. “Contractor” and


Phone 615-754-2554 Fax 615-754-7225

“Contracting agency”, as used within this and the following article, include the employees,

agents and other contractors who are directly responsible, respectively, to each. The term

“independent negligence” is negligence other than in the Contracting agency’s selection,

administration, monitoring, or controlling of the Contractor and in approving or accepting the

Contractor’s work. On-site vendors are required to provide proof of insurance (general liability,

workers comp, auto and excess). On-site vendor will add the City of Mt. Juliet as an additional

insurer if requested.

COMPLIANCE

In the performance of a contract that results from this RFP, the contractor must comply with all

applicable federal, state, and city regulations, codes, and laws; and be liable for all required

insurance, licenses, permits and bonds; and pay all applicable federal, state, and city taxes.

SUITABLE MATERIALS, ETC.

Unless otherwise specified, all materials, supplies or equipment offered by a bidder shall be

new, unused, and of the latest edition, version, model or crop and of recent manufacture. Unless

otherwise specified in the RFP, product brand names or model numbers are examples of the type

and of product quality required, and are not statements of preference. If the specifications

describing an item conflict with a brand name or model number with a description of the item,

the specifications govern. Reference to brand name or number does not preclude an offer of a

comparable or better product, if full specifications and descriptive literature are provided for the

product. For example, if the specifications call for 98 decibel alarm and the product offered has

only 95, the city reserves the right to consider the 95 decibel alarm offering as adequate. Failure

to provide such specifications and descriptive literature may be cause for rejection of the offer.

FIRM OFFER

For the purpose of award, offers made in accordance with this RFP must be good and firm for a

period of ninety (90) days from the date of quote opening or the date of complete delivery of the

order placed whichever is later. The city anticipates selection within 10 business days.

BID PREPARATION COSTS

The City is not liable for any costs incurred by the bidder in quote preparation.


Phone 615-754-2554 Fax 615-754-7225

CONFLICT OF INTEREST

An officer or employee of the City of Mount Juliet may not seek to acquire, be a party to, or

possess a financial interest in, this contract if (1) the officer or employee is an employee of the

administrative unit that supervises the award of this contract; or (2) the officer or employee has

the power to take or withhold official action so as to affect the award or execution of the

contract. Non-controlling ownership in stock of publicly held companies or ownership of mutual

funds shall not be considered as a financial interest.

DEFAULT

In case of default by the contractor/vendor, for any reason whatsoever, the City of Mount Juliet

may procure the goods or services from another source and hold the contractor/vendor

responsible for any resulting excess cost and may seek other remedies under law or equity.

CONTINUING OBLIGATION OF CONTRACTOR

Notwithstanding the expiration date of a contract resulting from this RFP, the contractor/vendor

is obligated to fulfill its responsibilities until warranty, guarantee, maintenance and parts

availability requirements have completely expired.

BILLING INSTRUCTIONS

Invoices must be billed to the Finance department at the address shown on the individual

Purchase Order, Contract Award or Delivery Order. Questions concerning payment should be

addressed to the Finance Department of the City of Mt. Juliet.

DISCRIMINATION CLAUSE

The City of Mt. Juliet is an equal opportunity entity and does not discriminate on the basis of

age, race, sex, national origin, religion or disability in admission to, access to, or operations of its

programs, services, activities, or in its awarding of such bids.

GENERAL

General Specifications of Actual Materials: The city reminds all bidders that the general

specifications may be satisfied with equivalents or near equivalents which the city deems as


Phone 615-754-2554 Fax 615-754-7225

acceptable. Bidders should note all exceptions to the specifications otherwise the city has the

right to expect equipment as specified.

Budget Restrictions

Bidders are reminded that the city has limited resources; therefore the city requires that the three

projects within this bid be quoted separately in order to allow the city to choose one or more

projects to complete while declining completion of those for which funding has been exhausted.

To that end, the City of Mt. Juliet reserves the right to award each project to a different bidder if

it appears in the best financial interest of the city.

Bids quoting only the three projects in the aggregate will be subject to discard as non-responsive.

PURPOSE

The City wants to add a modern IP Camera surveillance system to cover two city parks & an area

outside of Public Works. Specifically Charlie Daniels Park, Mundy Memorial Park and the

parking lot outside the Public Works building. The city wants to get detailed recognition of

subjects throughout the surveillance area when required with a goal of 40 pixels per foot.

DELIVERY

The City would like installation completed by April 30, 2013.


Phone 615-754-2554 Fax 615-754-7225

SYSTEM DESCRIPTION The scope of work consists of three locations and may consist of the following or a subset of it: The Avigilon Video Surveillance system shall be CCTV contractor furnished / CCTV contractor installed. Primary monitoring for the Avigilon system including camera control and recording/playback shall be at City of Mt. Juliet Dispatch and or any PC designated as a viewing station/location. System shall be provided with a minimum number of licenses permitting monitoring of live and playback video at locations specified by customer. The system shall consist of existing video cameras, Avigilon 4-channel rack mounted video encoders, Avigilon network video servers/recorders, Avigilon Control Center (ACC) video management software, network POE switches, and wiring/infrastructure as necessary to provide a complete working system. Designated existing analog cameras shall be connected to Avigilon 4-channel rack mounted IP encoders to convert all analog video into TCP/IP digital video. Designated cameras will not be replaced. All encoders will be connected to PoE network switches installed in the same rack as the encoders. Location of NVRs will be at the direction of the City of Mt. Juliet Technology department. Avigilon NVR servers will be connected to network switches, so that any PC with Avigilon Control Center (ACC) management software installed will have access to remote viewing. The video management software can be downloaded on any PC at no cost to the owner and with no software update costs/fees, software maintenance agreements or license renewals. The Avigilon NVR Server(s) will carry all licenses for client connections and camera/device connections. Scope of Work – Park Installations Avigilon Network Video Recorder (s) will be installed in a location determined by the City of Mt. Juliet. All analog cameras will be connected to Avigilon 4-channel encoders, distributed throughout facility. All encoders will stream video over the video system LAN to server locations, server(s) will include a pre-determined amount of on-board storage that will provide a minimum of 30 days of storage and will allow a minimum number of devices to connect and record. The Avigilon Certified Partner shall provide all Avigilon PoE switches for CCTV network, and connect the NVRs to both the CCTV network and the owner’s LAN for remote viewing. Avigilon Certified Partner shall work in conjunction with the owner’s IT department to program the network information into the units and establish connectivity between devices and servers. Avigilon Certified Partner shall be responsible for complete commissioning of the system - this will include installing the cameras, installing ACC client software on designated PC’s supplied by owner, programming servers to record all cameras at pre-determined frame rates, etc. Contractor is responsible for field verification of all cabling and Avigilon device connections. Contractor shall be an Avigilon Certified Partner with trained & certified technicians.


Phone 615-754-2554 Fax 615-754-7225

Certification letter from the manufacturer or manufacturer’s representative must be included with the bid.

Training User training shall be provided for staff that will operate and maintain the system. Provide 4 hours of training for staff who will manage the system. Technical training shall be provided for the owner’s staff and shall include basic system trouble shooting, programming for NVR server, repairs, adjustments and required preventive maintenance. The 4 hours of training can be requested throughout the 1st year of operation. Computer Based Training Modules either on-line or soft copies must be provided for staff covering the operation of the ACC software.

Warranty Provide at a minimum a full system parts and labor warranty covering materials and workmanship for a period not less than one-year following system acceptance. Manufacturer’s warranty on Avigilon (or equal) parts warrants that the products will be free of defects in material and workmanship for a period of 3 years from date of purchase. The manufacturer’s liability hereunder is limited to replacement of the product, repair of the product or replacement of the product with repaired product at the discretion of the manufacturer. All systems and components shall have undergone a thoroughly documented quality assurance process by the manufacturer. The manufacturer’s warranty, extended warranty and replacement policies shall be included for each specified component. Documentation Operation manuals shall include a minimum of two copies of complete system manuals from the equipment manufacturer. A minimum of two hard copies and one soft copy (i.e. provided on CD disc) of as built drawings showing all devices and cable runs shall be provided and turned over to the owner. Provide at a minimum a full system warranty covering materials and workmanship.


Phone 615-754-2554 Fax 615-754-7225

GENERAL

All systems and components shall have undergone a thoroughly documented quality assurance process

by the manufacturer. The manufacturer’s warranty, extended warranty and replacement policies shall

be included for each specified component.

The Network Video Management Software, NVR Hardware and related components shall be installed

and commissioned by authorized integrators trained and certified by the manufacturer. Certification and

training for authorized integrators shall be available from the manufacturer.

The manufacturer shall have a dedicated professional services group providing Integrators and End

Users the following fee-based services including but not limited to: training, installation, commissioning,

remote diagnostics and integration with 3rd party software and hardware systems.

NETWORK VIDEO MANAGEMENT SOFTWARE (NVMS)

The Network Video Management Software (NVMS) shall be Avigilon Control Center (ACC) version 4.12

or later. The NVMS shall be available as a stand-alone software offering or pre-loaded on turn-key

workstations and servers running Microsoft Windows with configurable storage.

The Network Video Management Software (NVMS) shall be capable of upgrading to an enterprise level

software solution (below specification) that shall be scalable from one client, server, and camera to

hundreds of clients, servers, and cameras. For the City Parks project, the City of Mt. Juliet is requesting

quotes for the Standard version of ACC, with the understanding that there is a simple upgrade path to

transition from Standard to Enterprise.

The Network Video Management Software (NVMS)shall consist of server software applications and

client software applications.

The Network Video Management Software (NVMS)shall include a gateway software application that

connects mobile devices to the NVMS.

The Network Video Management Software (NVMS)shall be available in the following languages:

• English


Phone 615-754-2554 Fax 615-754-7225

The Network Video Management Software (NVMS) shall include the following applications:

• Server Software Applications

• Control Center Server

• Control Center Admin Tool

• Control Center Gateway

• Client Software Applications

• Control Center Client

• Control Center Web Client

• Control Center Player

• Control Center Camera Installation Tool

• Control Center Mobile

The Network Video Management Software (NVMS) shall permit server and client software applications

to be installed and run on both the same computer or on separate computers.

The Network Video Management Software (NVMS) shall be supported by Android and Apple mobile

devices.

The Network Video Management Software (NVMS) shall support edge based storage and processing of

video and audio.

The Network Video Management Software (NVMS) shall support High Definition Stream Management

(HDSM) architecture which includes:

• Support for industry standard JPEG2000, MJPEG, MPEG-4, and H.264

compression formats

• Support for reducing the required client bandwidth and processing power by

only transmitting what is necessary to view the video stream at full quality

(e.g. if a user is viewing a 16MP camera in a 1MP window then a 1MP

representation of the 16MP image shall be transmitted).

The Network Video Management Software (NVMS) shall support HDSM for mobile devices.

The Network Video Management Software (NVMS) shall support recording and management of video

and audio sources including:

• Avigilon HD IP Cameras (1 – 5 Megapixel)

• Avigilon HD IP Dome Cameras (1 – 5 Mega pixels)

• Avigilon Panoramic HD IP Dome Cameras (8 Megapixel)

• Avigilon Day/Night H.264 HD Cameras (1– 5 Megapixel)

• Avigilon Day/Night H.264 HD Dome Cameras (1– 5 Megapixel)

• Avigilon HD PRO IP Cameras (8 – 29 Megapixel)


Phone 615-754-2554 Fax 615-754-7225

• Avigilon Day/Night HD PTZ Dome Camera (1–2 Megapixel)

• Composite video from analog cameras, PTZ domes and thermal imagers via

Avigilon ENC-4PORT and ENC-4P-H264 analog encoders

• Third-Party IP Devices

• ACTi Cameras/Encoders

• Arecont Cameras

• Axis Cameras/Encoders

• IQInvision Cameras

• Mobotix Cameras

• ONVIF 1.00, 1.01, and 1.02 Cameras

• Panasonic Cameras

• Pelco Cameras

• Samsung Cameras/Encoders

• Samsung Techwin cameras

• Sanyo Cameras

• Scallop Cameras

• Sightlogix Cameras

• Sony Cameras

• VideoIQ Cameras/Encoders

The Network Video Management Software (NVMS) shall support receiving digital input triggers and

triggering digital outputs through an I/O board.

The Network Video Management Software (NVMS) shall support recording and monitoring video and

audio streams from sources with bandwidth up to 90 Mbit/sec, frame rate up to 60 fps, and video

resolution up to 29 MP (6576 x 4384).

The Network Video Management Software (NVMS) shall support the decompression of H.264 video

through the client graphics card instead of using the client processing power.

The Network Video Management Software (NVMS) shall require no proprietary recording hardware, no

hardware multiplexer or time-division technology for video and audio recording or monitoring.

The Network Video Management Software (NVMS) shall not limit the storage capacity and shall allow

for upgrades of recording capacity.

The Network Video Management Software (NVMS) shall digitally sign recorded video and audio using

256-bit encryption so video can be authenticated for evidentiary purposes.

The Network Video Management Software (NVMS) shall securely transmit all command and control data

via TCP/IP using cryptographic keys based on SSL to prevent eavesdropping or tampering.


Phone 615-754-2554 Fax 615-754-7225

The Network Video Management Software (NVMS) shall be installed on systems which meet or exceed

the manufacturer’s requirements found in this link:

http://avigilon.com/support/req/

The Network Video Management Software (NVMS) shall also be available in turn-key NVR platforms

utilizing enterprise-grade servers and workstations pre-loaded with NVMS software and tested to

manufacturer specifications for deployment in enterprise applications.

The Network Video Management Software (NVMS) shall be available in a licensed Enterprise, Standard

and Core edition.

The Network Video Management Software (NVMS) shall support integration with the GE Security Facility

Commander Wnx v7.x platform for Electronic Access Control and Alarm Monitoring (Access System).

• Network Video Management Software (NVMS) will provide the mechanism by

which individual alarm(s) from the Access system can be pre-selected and

configured to be monitored and, in turn, trigger event driven video operations

• The Network Video Management Software shall support software level

integration (via the Wnx API) with GE Facility Commander for facilitating real-

time response to monitored events processed by Wnx v7.x. Alarm events. The

API integration should include:

• Bi-directional alarm event processing for monitoring and

acknowledgement

• Receiving card access activity events

• Receiving digital input events

• Receiving intrusion zone events

• Occurrences for “Alarm” and “Reset” conditions for each of the pre-selected

Access system alarms will be processed and managed from the NVMS

system’s Live View workspace that is reserved for displaying alarm

notifications in the alarm list message pane or from the FCWnx alarm viewer. If

the Alarm pane is hidden, the alarm can be acknowledged from the Camera

display tile.

• Once an Access system initiated alarm occurrence is acknowledged from

the NVMS system, it should be automatically acknowledged and processed in

the Access System alarm monitor queue without further operator intervention.

The Network Video Management Software (NVMS) shall support integration with Lenel OnGuard.

The Network Video Management Software (NVMS) shall support integration with Gallagher FT

Command Center.

The Network Video Management Software (NVMS) shall support integration with RS2 AccessIT!.

The Network Video Management Software (NVMS) shall support integration with DSX WinDSX.

http://avigilon.com/support/req/


Phone 615-754-2554 Fax 615-754-7225

The Network Video Management Software (NVMS) shall support integration with Jacques VoIP Voice

Communication System.

The Network Video Management Software (NVMS) shall support integration with Zenitel Stentofon IP

Intercom.

The Network Video Management Software (NVMS) shall support integration with DDS Amadeus.

The Network Video Management Software (NVMS) shall support integration with Software House CCure

9000.

The Network Video Management Software (NVMS) shall support integration with Hirsch Velocity.

The Network Video Management Software (NVMS) shall support integration with Picture Perfect 4.

The Network Video Management Software (NVMS) shall support integration with S2 Netbox.

The Network Video Management Software (NVMS) shall be capable of being upgraded from one version

to another without having to uninstall the previous version.

The Network Video Management Software (NVMS) shall be capable of being upgraded from one edition

to another without having to uninstall the application.

The Network Video Management Software (NVMS) shall automatically detect if video or audio source

firmware is out of date with respect to the current installed software and upgrade it.

The Network Video Management Software (NVMS) shall automatically detect if client application

software is out of date with respect to the current installed server software and upgrade it.

The Network Video Management Software (NVMS) shall run as a service configured to automatically

start when the server or workstation is powered on and automatically recover from failure or attempted

tampering.

The Network Video Management Software (NVMS) shall allow system administration, and live and

recorded video and audio monitoring all from a single client application that can be located anywhere

on the network.

The Network Video Management Software (NVMS) shall automatically discover all Control Center Server

instances running on computers connected to the same network as the Control Center Client.


Phone 615-754-2554 Fax 615-754-7225

The Network Video Management Software (NVMS) shall provide a search functionality to discover

Control Center Server instances running on computers connected on a different network segment than

the Control Center Client by using IP addresses or hostnames.

The Network Video Management Software (NVMS) shall automatically discover video and audio sources

that are connected to the same network as the Control Center Server.

The Network Video Management Software (NVMS) shall provide a search functionality to discover video

and audio sources that are connected on a different network segment than the Control Center Server.

The Network Video Management Software (NVMS) shall provide the ability to connect a video or audio

source to multiple NVRs to achieve redundant recording.

The Network Video Management Software (NVMS) shall provide the ability to create a failover

connection for a video or audio source. If the NVR that the video or audio source is connected to goes

offline then the failover NVR will take over the connection.

The Network Video Management Software (NVMS) shall provide administration of all system

connections from a single window.

The Network Video Management Software (NVMS) shall support receiving Simple Network

Management Protocol (SNMP) messages from servers and alert the user.

The Network Video Management Software (NVMS) shall detect if the video or audio signal is lost and

alert the system administrator.

The Network Video Management Software (NVMS) shall provide the capability to rename all video and

audio sources and NVRs.

The Network Video Management Software (NVMS) shall record video and audio streams based on a

recording schedule that can be defined individually for each video source. The schedule shall be created

with the following parameters:

• Recording Mode

• Continuous

• Motion

• Digital Inputs

• Alarms

• POS Transactions

• License Plates

• Time and Date Settings


Phone 615-754-2554 Fax 615-754-7225

• Daily

• Weekly

The Network Video Management Software (NVMS) shall provide the ability to manually trigger

recording.

The Network Video Management Software (NVMS) shall provide a pre-event and post-event recording

option.

The Network Video Management Software (NVMS) shall provide a reference frame recording option in

the absence of events.

The Network Video Management Software (NVMS) shall perform motion detection on each individual

video source with adjustable sensitivity, threshold and detection zones.

The Network Video Management Software (NVMS) shall provide the ability to reduce the image rate of

recorded JPEG and JPEG2000 video over time as a means of increasing record time. The image rate shall

be able to be reduced to one half or one quarter of the original image rate. This setting can be

configured separately for each JPEG and JPEG2000 video source.

The Network Video Management Software (NVMS) shall provide the ability to record and maintain a

primary and secondary video stream for a set amount of time before the primary stream is discarded as

a means of increasing record time. This setting can be configured separately for each H.264 video

source.

The Network Video Management Software (NVMS) shall provide the ability to set a maximum recorded

video retention time for each video source.

The Network Video Management Software (NVMS) shall perform dynamic bandwidth management to

ensure that the total bandwidth does not overload the system.

The Network Video Management Software (NVMS) shall authenticate users before granting access to

the system. Access rights for each user can be defined individually for each user, and shall include:

• Viewing live images

• Using PTZ controls

• Locking PTZ controls

• Trigger manual recording

• Trigger digital outputs

• Listen to microphones

• Broadcast to speakers

• Viewing recorded images


Phone 615-754-2554 Fax 615-754-7225

• Exporting images

• Backup recorded images

• Manage user sessions

• Connect and disconnect cameras

• Setup cameras

• Setup general settings

• Setup network settings

• Setup image and display settings

• Setup compression and image rate

• Setup image dimension settings

• Setup motion detection settings

• Setup privacy zone settings

• Setup manual recording settings

• Setup digital input & output settings

• Setup microphone settings

• setup speaker settings

• Setup servers

• Setup general settings

• Setup schedule settings

• Setup recording and bandwidth settings

• Setup user and group settings

• Setup alarm management settings

• Setup scheduled backup settings

• Setup POS transaction settings

• Setup email settings

• Setup rule engine settings

• View system log

• Access to individual video and audio sources

The Network Video Management Software (NVMS) shall provide the ability to import members of Active

Directory groups as users in the NVMS. Changes made to members in the Active Directory are

automatically synced with the NVMS.

The Network Video Management Software (NVMS) shall optionally support using Windows credentials

to authenticate users.

The Network Video Management Software (NVMS) shall provide the ability to create and schedule

alarms.


Phone 615-754-2554 Fax 615-754-7225

The Network Video Management Software (NVMS) shall provide the ability to schedule backups of

recorded video with associated events to a local folder or mapped network drive.

The Network Video Management Software (NVMS) shall provide the ability to email users and system

administrators when an event or system health error occurs.

The Network Video Management Software (NVMS) shall provide the ability to schedule when email

notifications are sent.

The Network Video Management Software (NVMS) shall provide the ability to include camera images in

email notifications.

The Network Video Management Software (NVMS) shall maintain an event log for the following events:

• Server Events

• Server application starting up

• Server application shutting down

• Server application terminated unexpectedly

• Server application low on resources

• Server application installation error

• Licensed feature expires soon

• Licensed feature expired

• Database error

• Data initialization error

• Data volume failed

• Data volume recovered

• Data volume size reduced

• Data write error

• Data upgrade started

• Data upgrade completed

• Data upgrade failed

• Data recovery started

• Data recovery completed

• Data recovery failed

• Network connection found

• Network connection lost

• Network error

• Network error resolved

• Email send error


Phone 615-754-2554 Fax 615-754-7225

• Server hardware error

• Backup started

• Backup completed

• Backup failed

• Device Events

• Connection created

• Connection removed

• Connection created to standby server

• Connection removed from standby server

• Connection failure

• Connection restored

• Network packet loss unacceptable

• Network packet loss acceptable

• Motion detection started

• Motion detection ended

• Recording started

• Recording ended

• Recording interrupted

• Recording resumed

• Digital input activated

• Digital input deactivated

• Firmware upgrade started

• Firmware upgrade completed

• Firmware upgrade failed

• User Events

• User login

• User logout

• Server setting changed

• Device setting changed

• Device connected

• Device disconnected

• Digital output triggered

• Bookmark added

• Bookmark updated

• Bookmark deleted

• PTZ moved

• PTZ idle

• Export performed


Phone 615-754-2554 Fax 615-754-7225

• Speaker activated

• Speaker deactivated

• Alarm Events

• Alarm acknowledged

• Alarm auto acknowledged

• Alarm triggered

• Alarm assigned

• Alarm unassigned

• Alarm purged

• POS Transaction Events

• POS transaction started

• POS transaction ended

• POS transaction exception

• License Plate Recognition Events

• License plate detection started

• License plate detection ended

• License plate watchlist match

The Network Video Management Software (NVMS) shall have the capability to schedule and execute

any of the following actions in response to any of the events listed above:

• User Notification Actions

• Display on-screen message

• Send an email

• Play a sound

• Monitoring Actions

• Start live streaming video

• Device Actions

• Reboot camera

• Trigger digital output

• PTZ Actions

• Go to Preset

• Run a Pattern

• Set Auxiliary

• Clear Auxiliary

• Alarm actions

• Trigger an alarm

• Acknowledge an alarm

The Network Video Management Software (NVMS) shall provide the ability to create customized on-

screen messages and email notifications.


Phone 615-754-2554 Fax 615-754-7225

The Network Video Management Software (NVMS) shall provide a maintenance log and audit trail of all

system errors and events.

The Network Video Management Software (NVMS) shall provide the ability to receive transaction

information from point-of-sale sources.

The Network Video Management Software (NVMS) shall support multiple encoding formats from point-

of-sale sources.

The Network Video Management Software (NVMS) shall provide the ability to monitor live and recorded

transactions from point-of-sale sources with linked video.

The Network Video Management Software (NVMS) shall provide the ability to generate events based on

point-of-sale transaction exceptions.

The Network Video Management Software (NVMS) shall provide the ability to define a region of an

image where license plate detection is performed. Detected license plates shall be stored along with the

video data.

The Network Video Management Software (NVMS) shall provide the ability to create a watchlist that will

be used to create events when any license plate on the watchlist is detected in the images being

analyzed.

The Network Video Management Software (NVMS) shall provide the ability to enable and configure PTZ

control on the RS-485 interface of a video source.

The Network Video Management Software (NVMS) shall support the following list of PTZ camera

protocols:

• American Dynamics Sensormatic

• AXSYS

• AXSYS DCU

• Ernitec ERNA

• Honeywell Diamond

• Kalatel ASCII

• Pelco D

• Pelco P

• TEB Ligne

• Vicon extended

• Vicon normal

• Videotec Legacy


Phone 615-754-2554 Fax 615-754-7225

• Videotec MACRO

The Network Video Management Software (NVMS) shall provide the ability to change the network

settings for a video and audio source.

The Network Video Management Software (NVMS) shall provide the ability to change image quality and

image rate parameters for a video source without affecting the settings on the other video sources.

The Network Video Management Software (NVMS) shall provide the ability to enable a secondary

stream for live viewing.

The Network Video Management Software (NVMS) shall provide the ability to change the exposure, iris,

IR filter, backlight compensation, gain, priority, sharpening, saturation, focus, and white balance settings

for a video source.

The Network Video Management Software (NVMS) shall provide the ability to change the image

dimensions for a video source.

The Network Video Management Software (NVMS) shall provide the ability to rotate the image 90°, 180°

or 270° for a video source.

The Network Video Management Software (NVMS) shall provide the ability to add privacy zones to a

video source to block unwanted areas in the image field of view.

The Network Video Management Software (NVMS) shall provide the ability to set a maximum recording

duration for manually triggered recording for a video source.

The Network Video Management Software (NVMS) shall provide the ability to change the input, output,

gain and volume for an audio source.

The Network Video Management Software (NVMS) shall provide for full-duplex two- way audio

communication.

The Network Video Management Software (NVMS) shall provide the ability to link any audio source to

any video source.

The Network Video Management Software (NVMS) shall provide the ability to set a limit on the

maximum bandwidth transmitted to the Control Center Client application from the Control Center

Server application.

The Network Video Management Software (NVMS) shall provide the ability to automatically log in to an

NVR.


Phone 615-754-2554 Fax 615-754-7225

The Network Video Management Software (NVMS) shall provide the ability to override user access to an

NVR if there are insufficient licenses.

The Network Video Management Software (NVMS) shall provide the ability to automatically log out of

an NVR when the application is left idle.

The Network Video Management Software (NVMS) shall provide the ability to save and restore the

window layout.

The Network Video Management Software (NVMS) shall provide the ability to control the system using a

PC keyboard or joystick.

The Network Video Management Software (NVMS) shall provide the ability to import and export client

settings such as maps, views, and web pages.

The Network Video Management Software (NVMS) shall support live or recorded video monitoring of 1

to 36 video streams simultaneously on a single monitor with the following standard layouts:

• Full Screen

• 2 x 2

• 3 x 3

• 4 x 4

• 5 x 5

• 6 x 6

• 1 + 5

• 1 + 7

• 1+ 12

• 2 + 8

The Network Video Management Software (NVMS) shall support live or recorded video monitoring in a

customizable video display beyond the standard layouts.

The Network Video Management Software (NVMS) shall support the ability to bias the displayed video

to a higher frame rate or to a lower image resolution if the client network bandwidth or client

processing power is insufficient to display the full frame rate and image resolution.

The Network Video Management Software (NVMS) shall support the ability to display the following list

of image overlays:

• Camera Name

• Camera Location

• Timestamp


Phone 615-754-2554 Fax 615-754-7225

• Record Indicator

• Motion Activity

• License Plate

The Network Video Management Software (NVMS) shall support an unlimited number of monitors for

monitoring video and audio streams.

The Network Video Management Software (NVMS) shall support monitoring live and recorded video and

audio streams simultaneously on the same monitor.

The Network Video Management Software (NVMS) shall support viewing the same live or recorded

video stream at different zoom levels.

The Network Video Management Software (NVMS) shall support the ability to switch from live to

recorded video on demand for an instant replay of recently recorded video.

The Network Video Management Software (NVMS) shall support the creation of unlimited views with

unique layouts of video streams.

The Network Video Management Software (NVMS) shall support the ability to full-screen a view.

The Network Video Management Software (NVMS) shall support the ability to save views.

The Network Video Management Software (NVMS) shall support the ability to cycle through views

(guard tour) based on a specified interval.

The Network Video Management Software (NVMS) shall display all video sources connected to the

system.

The Network Video Management Software (NVMS) shall support the ability to drag and drop a video

source from a tree of video sources into a window for live or recorded video and audio monitoring.

The Network Video Management Software (NVMS) shall support the ability to drag and drop a view

from a tree of views into a window for live or recorded video and audio monitoring.

The Network Video Management Software (NVMS) shall support the ability to configure how the tree of

video sources and views is displayed.

The Network Video Management Software (NVMS) shall support the ability to designate one or more

regions in a window for displaying video directly linked to triggered alarms and rules.

The Network Video Management Software (NVMS) shall support the ability to acknowledge alarms from

the designated video display area.


Phone 615-754-2554 Fax 615-754-7225

The Network Video Management Software (NVMS) shall support the ability to manually trigger digital

output.

The Network Video Management Software (NVMS) shall support the ability to create a map that

represents the physical location of cameras and other devices throughout the surveillance system. Maps

shall be created from images stored in JPEG, BMP, PNG, or GIF image formats. Maps shall have the

ability to contain links so as to create a hierarchy of interlinked maps.

The Network Video Management Software (NVMS) shall support the ability to create a map that has a

link to a section of the entire image region.

The Network Video Management Software (NVMS) shall support the ability to drag and drop a video

source from a map into a window for live or recorded video and audio monitoring.

The Network Video Management Software (NVMS) shall highlight a camera on a map when an alarm

linked to the camera is triggered.

The Network Video Management Software (NVMS) shall highlight a linked map that contains a camera

when an alarm linked to the camera is triggered.

The Network Video Management Software (NVMS) shall support the ability to save a link to a web page

and view the web page in a window.

The Network Video Management Software (NVMS) shall support digital zooming and panning on live

and recorded video streams.

The Network Video Management Software (NVMS) shall support controlling mechanical pan-tilt-zoom,

iris, and focus as well as setting presets and patterns.

The Network Video Management Software (NVMS) shall provide the ability to name pan-tilt-zoom

presets.

The Network Video Management Software (NVMS) shall support the ability to create guard tours by

combining a set number of presets that are run in sequence or random.

The Network Video Management Software (NVMS) shall support the ability to center a PTZ camera’s

field of view by clicking anywhere on the video image.

The Network Video Management Software (NVMS) shall support the ability to click and drag to define

an area for the PTZ camera to optically zoom and center on.


Phone 615-754-2554 Fax 615-754-7225

The Network Video Management Software (NVMS) shall support controlling mechanical pan-tilt-zoom

camera on-screen display and auxiliary controls.

The Network Video Management Software (NVMS) shall support locking PTZ controls.

The Network Video Management Software (NVMS) shall support control of a mechanical pan-tilt-zoom

camera with a USB joystick.

The Network Video Management Software (NVMS) shall support forward and reverse playback of

recorded video and audio at variable speeds.

The Network Video Management Software (NVMS) shall synchronously playback recorded video and

audio from selected video sources.

The Network Video Management Software (NVMS) shall support navigation of recorded video and audio

via calendar, timeline, or events.

The Network Video Management Software (NVMS) shall support a timeline that displays all connected

video sources and the corresponding motion and recording events.

The Network Video Management Software (NVMS) shall support a timeline that can display the entire

time range down to one second of recorded video and audio.

The Network Video Management Software (NVMS) shall support creating bookmarks for recorded video

and audio from multiple sources, displaying the bookmarks on the timeline, and searching for

bookmarks.

The Network Video Management Software (NVMS) shall support protecting a bookmark so the video

and audio data is never overwritten.

The Network Video Management Software (NVMS) shall support monitoring alarms.

The Network Video Management Software (NVMS) shall support the ability to assign alarms to users.

The Network Video Management Software (NVMS) shall support the ability to acknowledge alarms.

The Network Video Management Software (NVMS) shall support the ability to bookmark alarms.

The Network Video Management Software (NVMS) shall support searching through bookmarks based on

various search criteria including bookmark name, notes, and linked camera names.

The Network Video Management Software (NVMS) shall support searching through recorded video and

audio based on various search criteria including time, date, video source, and events.


Phone 615-754-2554 Fax 615-754-7225

The Network Video Management Software (NVMS) shall support searching through recorded video

based on motion in user defined areas (pixel search).


based on time, date, video source, and image region and have the results displayed as a series of

thumbnail images.


based on alarm events.


based on point-of-sale transaction events.


based on license plates detected in the images of the video source.

The Network Video Management Software (NVMS) shall support the ability to export recorded video in

the following formats:

• Native

• JPEG

• PNG

• TIFF

• AVI

• WAV

• PDF

• Print

The Network Video Management Software (NVMS) shall support the ability to export recorded audio in

WAV format.

The Network Video Management Software (NVMS) shall support the ability to take a snapshot of a live

or recorded image and export it from the system.

The Network Video Management Software (NVMS) shall support the ability to export a live stream of

images in the following formats:

• JPEG

• PNG

• TIFF


Phone 615-754-2554 Fax 615-754-7225

The Network Video Management Software (NVMS) shall support the ability to export video from

multiple camera streams in Native format.

The Network Video Management Software (NVMS) shall support reviewing video and audio that was

exported in the Native format.

The Network Video Management Software (NVMS) shall provide the camera properties and time zone

for video exported in Native format.

The Network Video Management Software (NVMS) shall support authenticating video that was exported

in the Native format to validate that it was not tampered with.

The Network Video Management Software (NVMS) shall support converting video that was exported in

the Native format to an industry standard format.

The Network Video Management Software (NVMS) shall support reviewing video and audio stored in a

backup.

ALL AVIGILON CAMERAS AND ENCODERS

All Avigilon Cameras shall support 100BASE-TX and PoE 802.3af network interfaces for streaming video

and control data over standards compliant networks.

All Avigilon Cameras shall operate in the Avigilon Control Center (ACC) environment with support for

automatic detection of cameras, encoders and NVRs in the same broadcast domain.

All Avigilon Cameras shall support user configuration of network parameters including: Static IP address;

Subnet Mask; Gateway; and Control Port for control communications.

All Avigilon Cameras shall support user configuration of camera parameters including: Camera Name;

Location and Logical ID.

All Avigilon Cameras shall support user configuration of image acquisition parameters including:

Exposure Control; Flicker Control; Iris Control; Backlight Compensation; White balance Control; Color

Saturation and Sharpening.

All Avigilon Cameras shall support user configuration of a fully customizable motion detection mask

within the camera field of view.

All Avigilon Cameras shall support user configuration of up to 4 privacy zones within the camera field of

view.


Phone 615-754-2554 Fax 615-754-7225

All Avigilon Cameras shall support user configuration of compression quality and image rate per

individual camera.

All Avigilon Cameras shall have input/output terminals for connecting alarm inputs and alarm outputs.

All Avigilon Cameras shall support UDP transport.

All Avigilon Cameras shall be remotely upgradeable over an IP network for feature enhancements and

investment protection.

All Avigilon Cameras shall meet or exceed the stated design and performance specifications.

Warranty

A. 12 months parts and labor for moving parts. 36 months for all other parts and labor.

(-H3-) HIGH DEFINITION H.264 DAY/NIGHT IP CAMERA SERIES

The High Definition H.264 Day/Night IP Camera Series shall be ONVIF compliant.

The High Definition H.264 Day/Night IP Camera Series shall have multi-streaming support including

different frame rate, bit rate, resolution, quality and compression format from an individual camera.

The High Definition H.264 Day/Night IP Camera Series shall have a built-in web server to make video and

configuration available in a standard browser environment. The built-in web server shall support

multiple users with different permission levels and unique usernames and passwords.

The High Definition H.264 Day/Night IP Camera Series shall support remote zoom and focus control of

the lens and performing automatic focus.

All Avigilon Cameras shall support a mode that automatically removes the IR filter and enters a

monochrome mode when the available light drops below a set threshold.

The High Definition H.264 Day/Night IP Camera Series shall support user configuration of compression

format, compression quality, maximum bit rate, key frame interval, and image rate per individual

camera.

The High Definition H.264 Day/Night IP Camera Series shall have an audio input for connecting external

microphones.


Phone 615-754-2554 Fax 615-754-7225

The High Definition H.264 Day/Night IP Camera Series shall have an audio output for connecting external

speakers.

The High Definition H.264 Day/Night IP Camera Series shall have a video output for connecting external

monitors.

Camera Specifications

A. Image Sensor: 1&2MP – 1/2.7” progressive scan CMOS 3MP – WDR 1/3” progressive scan CMOS

5MP – 1/3.2” progressive scan CMOS B. Active Pixels: 1MP – 1280 (H) x 720 (V)

2MP – 1920 (H) x 1080 (V)

3MP – 2048 (H) x 1536 (V)

5MP – 2592 (H) x 1944 (V) C. Imaging Area: 1&2MP – 5.9 mm (H) x 3.3 mm (V); 0.231" (H) x 0.129" (V)

3MP – 4.5 mm (H) x 3.4 mm (V); 0.177” (H) x 0.133” (V) 5MP – 4.6 mm (H) x 3.4 mm (V); 0.181” (H) x 0.133” (V)

D. Minimum Illumination: 1,2&3MP – B2/D1: 0.2 lux (F1.2) in color mode; 0.02 lux (F1.2) in monochrome mode

B3/D2: 0.4 lux (F1.6) in color mode;

0.04 lux (F1.6) in monochrome mode

5MP – B2/D1: 0.3 lux (F1.2) in color mode;


B3/D2: 0.6 lux (F1.6) in color mode;

0.06 lux (F1.6) in monochrome mode E. Dynamic Range: 69 dB F. Lens: B2/D1 – 3-9 mm, F1.2, P-iris, remote focus and zoom

B3/D2 – 9-22 mm, F1.6, P-iris, remote focus and zoom G. Angle of View: 1&2MP – D1: 35° - 98°; D2: 15º - 35º

3&5MP – D1: 28° - 84°; D2: 12º - 28º H. Image Compression Method: H.264 (MPEG-4 Part 10/AVC), Motion JPEG I. Image Rate: 1&2MP – 30 (all resolutions)

3MP – 20 (at full resolution), 30 (at 1920 x 1080 or smaller)

5MP – 13 (at full resolution), 30 (at 1920 x 1080 or smaller) J. Resolution Scaling: 1&2MP - Down to 768 x 432

3&5MP - Down to 480 x 360 K. Streaming: Multi-stream H.264 and motion JPEG L. Motion Detection: Selectable sensitivity and threshold M. Electronic Shutter Control: Automatic, Manual (1/6 to 1/8000 sec) N. Iris Control: Automatic, Manual O. Day/Night Control: Automatic, Manual P. Flicker Control: 50 Hz, 60 Hz Q. White Balance: Automatic, Manual R. Privacy Zones: Up to 4 zones


Phone 615-754-2554 Fax 615-754-7225

S. Audio Input/Output: Line input, A/V mini-jack (3.5 mm) T. Audio Compression Method: G.711 PCM 8kHz U. Video Output: NTSC/PAL, A/V mini-jack (3.5 mm) V. External I/O Terminals: Alarm In, Alarm Out; terminal strip

Electrical Specifications

A. Power Source: PoE: IEEE 802.3af Class 3 compliant; 24 VAC, 12 VDC

B. Power Connector: 2-pin terminal block

Network Specifications

A. Network: 100BASE-TX B. Cabling: CAT5 C. Connector: RJ-45 D. API: ONVIF compliant (www.onvif.org) E. Security: Password protection, HTTPS encryption, digest

authentication, WS authentication, user access log. F. Protocols: IPv4, HTTP, HTTPS, SOAP, DNS, NTP, RTSP, RTCP, RTP,

TCP,UDP, IGMP, ICMP, DHCP, Zeroconf, ARP G. Streaming Protocols: RTP/UDP, RTP/UDP multicast, RTP/RTSP/TCP,

RTP/RTSP/HTTP/TCP, RTP/RTSP/HTTPS/TCP, HTTP

Certifications and Regulations

A. Certifications: UL 60950 CSA60950 EN 60950-1 CE ROHS WEEE

B. Electromagnetic Emissions: FCC Part 15 Subpart B Class B IC ICES-003 Class B EN 55022 Class B

C. Electromagnetic Immunity: EN 55024 EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 EN 61000-4-11

(-H3-D-) DAY/NIGHT H.264 DOME CAMERA SERIES


Phone 615-754-2554 Fax 615-754-7225

The Day/Night H.264 Dome Camera Series shall have a 3-axis pan-tilt-twist gimbal system for positioning

the lens and image sensor.

The Day/Night H.264 Dome Camera Series shall have tamper resistant screws.

(-H3-D) DAY/NIGHT H.264 HD INDOOR DOME CAMERA

Electrical Specification

A. Power Consumption: 5 W maximum

Physical & Environmental Specifications

A. Dimensions: 140 mm x 104 mm; 5.5” x 4.1” B. Weight: 0.55 kg (1.2 lbs) C. Dome Bubble: Polycarbonate, clear D. Body: Plastic E. Housing: Surface mount, tamper resistant F. Finish: Plastic, RAL 9003 G. Adjustment Range: 360° pan, 180° tilt, 360° azimuth H. Operating Temp: -10°C to +50°C (14°F to 122°F) I. Storage Temp: -10°C to +70°C (14°F to 158°F) J. Humidity: 20 - 80%, relative humidity (non-condensing)

Part numbers & Accessories

A. 1.0-H3-D1 1.0 Megapixel Day/Night H.264 HD 3-9mm Indoor Dome Camera

B. 1.0-H3-D2 1.0 Megapixel Day/Night H.264 HD 9-22mm Indoor Dome Camera

C. 2.0-H3-D1 2.0 Megapixel Day/Night H.264 HD 3-9mm Indoor Dome Camera

D. 2.0-H3-D2 2.0 Megapixel Day/Night H.264 HD 9-22mm Indoor Dome Camera

E. 3.0W-H3-D1 3.0 Megapixel WDR Day/Night H.264 HD 3-9mm Indoor Dome Camera

F. 3.0W-H3-D2 3.0 Megapixel WDR Day/Night H.264 HD 9-22mm Indoor Dome Camera

G. 5.0-H3-D1 5.0 Megapixel Day/Night H.264 HD 3-9mm Indoor Dome Camera

H. 5.0-H3-D2 5.0 Megapixel Day/Night H.264 HD 9-22mm Indoor Dome Camera

I. H3-D-SMOKE: Dome Camera Cover with Smoked Bubble

(-H3-DC) DAY/NIGHT H.264 HD IN-CEILING DOME CAMERA


Phone 615-754-2554 Fax 615-754-7225




A. Dimensions: 167 mm x 130 mm; 6.6” x 5.1” B. Weight: 0.56 kg (1.2 lbs) C. Dome Bubble: Polycarbonate, clear D. Body: Plastic E. Housing: Recessed mount, tamper resistant F. Finish: Plastic, RAL 9003 G. Adjustment Range: 360° pan, 180° tilt, 360° azimuth H. Operating Temp: -10°C to +50°C (14°F to 122°F) I. Storage Temp: -10°C to +70°C (14°F to 158°F) J. Humidity: 20 - 80%, relative humidity (non-condensing)


A. 1.0-H3-DC1 1.0 Megapixel Day/Night H.264 HD 3-9mm In-Ceiling Dome Camera

B. 1.0-H3-DC2 1.0 Megapixel Day/Night H.264 HD 9-22mm In-Ceiling Dome Camera

C. 2.0-H3-DC1 2.0 Megapixel Day/Night H.264 HD 3-9mm In-Ceiling Dome Camera

D. 2.0-H3-DC2 2.0 Megapixel Day/Night H.264 HD 9-22mm In-Ceiling Dome Camera

E. 3.0W-H3-DC1 3.0 Megapixel WDR Day/Night H.264 HD 3-9mm In-Ceiling Dome Camera

F. 3.0W-H3-DC2 3.0 Megapixel WDR Day/Night H.264 HD 9-22mm In-Ceiling Dome Camera

G. 5.0-H3-DC1 5.0 Megapixel Day/Night H.264 HD 3-9mm In-Ceiling Dome Camera

H. 5.0-H3-DC2 5.0 Megapixel Day/Night H.264 HD 9-22mm In-Ceiling Dome Camera

I. H3-DC-SMOKE: Dome Camera Cover with Smoked Bubble J. H3-DC-PNL Metal Ceiling Panel

(-H3-DO) DAY/NIGHT H.264 HD OUTDOOR DOME CAMERA

The Day/Night H.264 HD Outdoor Dome Camera shall have a vandal proof dome cover.

The Day/Night H.264 HD Outdoor Dome Camera shall be functional in outdoor environments.

The Day/Night H.264 HD Outdoor Dome Camera shall have a built in heater.


Phone 615-754-2554 Fax 615-754-7225




A. Dimensions: 152 mm x 109 mm; 6.0” x 4.3” B. Weight: 1.2 kg (2.6 lbs) C. Dome Bubble: Polycarbonate, clear D. Body: Aluminum E. Housing: Surface mount, vandal resistant F. Finish: Powder coat, cool gray 2 G. Adjustment Range: 360° pan, 180° tilt, 360° azimuth H. Operating Temp: -30°C to +50°C (-22°F to 122°F) I. Storage Temp: -10°C to +70°C (14°F to 158°F) J. Humidity: 20 - 80%, relative humidity (non-condensing)


A. Environmental: IK10 Impact Rating Meets IP66 Weather Rating


A. 1.0-H3-DO1 1.0 Megapixel Day/Night H.264 HD 3-9mm Outdoor Dome Camera

B. 1.0-H3-DO2 1.0 Megapixel Day/Night H.264 HD 9-22mm Outdoor Dome Camera

C. 2.0-H3-DO1 2.0 Megapixel Day/Night H.264 HD 3-9mm Outdoor Dome Camera

D. 2.0-H3-DO2 2.0 Megapixel Day/Night H.264 HD 9-22mm Outdoor Dome Camera

E. 3.0W-H3-DO1 3.0 Megapixel WDR Day/Night H.264 HD 3-9mm Outdoor Dome Camera

F. 3.0W-H3-DO2 3.0 Megapixel WDR Day/Night H.264 HD 9-22mm Outdoor Dome Camera

G. 5.0-H3-DO1 5.0 Megapixel Day/Night H.264 HD 3-9mm Outdoor Dome Camera

H. 5.0-H3-DO2 5.0 Megapixel Day/Night H.264 HD 9-22mm Outdoor Dome Camera

I. H3-DOP-SMOKE: Dome Camera Cover with Smoked Bubble

(-H3-DP) DAY/NIGHT H.264 HD PENDANT DOME CAMERA

The Day/Night H.264 HD Pendant Dome Camera shall have a vandal proof dome cover.


Phone 615-754-2554 Fax 615-754-7225

The Day/Night H.264 HD Pendant Dome Camera shall be functional in outdoor environments.

The Day/Night H.264 HD Pendant Dome Camera shall have a pendant mount bracket.

The Day/Night H.264 HD Pendant Dome Camera shall have a built in heater.




A. Dimensions: 167 mm x 157 mm 6.6” x 6.2”

B. Weight: 2.1 kg (4.6 lbs) C. Dome Bubble: Polycarbonate, clear D. Body: Aluminum E. Housing: Pendant mount, vandal resistant F. Finish: Powder coat, cool gray 2 G. Adjustment Range: 360° pan, 180° tilt, 360° azimuth H. Operating Temp: -30°C to +50°C (-22°F to 122°F) I. Storage Temp: -10°C to +70°C (14°F to 158°F) J. Humidity: 20 - 80%, relative humidity (non-condensing)




A. 1.0-H3-DP1 1.0 Megapixel Day/Night H.264 HD 3-9mm Pendant Dome Camera

B. 1.0-H3-DP2 1.0 Megapixel Day/Night H.264 HD 9-22mm Pendant Dome Camera

C. 2.0-H3-DP1 2.0 Megapixel Day/Night H.264 HD 3-9mm Pendant Dome Camera

D. 2.0-H3-DP2 2.0 Megapixel Day/Night H.264 HD 9-22mm Pendant Dome Camera

E. 3.0W-H3-DP1 3.0 Megapixel WDR Day/Night H.264 HD 3-9mm Pendant Dome Camera

F. 3.0W-H3-DP2 3.0 Megapixel WDR Day/Night H.264 HD 9-22mm Pendant Dome Camera


Phone 615-754-2554 Fax 615-754-7225

G. 5.0-H3-DP1 5.0 Megapixel Day/Night H.264 HD 3-9mm Pendant Dome Camera

H. 5.0-H3-DP2 5.0 Megapixel Day/Night H.264 HD 9-22mm Pendant Dome Camera

I. H3-DOP-SMOKE: Dome Camera Cover with Smoked Bubble J. MNT-PEND-WALL Indoor/Outdoor Pendant Mount Bracket

(-H3-B) DAY/NIGHT H.264 HD CAMERA




A. Dimensions: 120 mm x 67 mm x 53 mm; 4.7” x 2.6” x 2.1” B. Weight: 0.47 kg (1.0 lbs) C. Camera Mount: 1/4” UNC-20 (top & bottom) D. Operating Temperature: -10°C to +50°C (14°F to 122°F)

-10°C to +45°C (14°F to 113°F)

(with 12 VDC power source) E. Storage Temperature: -10°C to +70°C (14°F to 158°F) F. Humidity: 20 - 80%, relative humidity (non-condensing)

Part Number & Accessories

A. 1.0-H3-B2 1.0 Megapixel Day/Night H.264 HD 3-9mm Camera B. 1.0-H3-B3 1.0 Megapixel Day/Night H.264 HD 9-22mm Camera C. 2.0-H3-B2 2.0 Megapixel Day/Night H.264 HD 3-9mm Camera D. 2.0-H3-B3 2.0 Megapixel Day/Night H.264 HD 9-22mm Camera E. 3.0W-H3-B2 3.0 Megapixel WDR Day/Night H.264 HD 3-9mm Camera F. 3.0W-H3-B3 3.0 Megapixel WDR Day/Night H.264 HD 9-22mm Camera G. 5.0-H3-B2 5.0 Megapixel Day/Night H.264 HD 3-9mm Camera H. 5.0-H3-B3 5.0 Megapixel Day/Night H.264 HD 9-22mm Camera

(-H3-B1) DAY/NIGHT H.264 HD 4.7-84.6MM CAMERA


A. Image Sensor: 1/3” progressive scan CMOS B. Active Pixels: 1MP – 1280 (H) x 720 (V);

2MP – 1920 (H) x 1080 (V)


Phone 615-754-2554 Fax 615-754-7225

C. Imaging Area: 4.2 mm (H) x 2.4 mm (V); 0.165" (H) x 0.094" (V) D. Minimum Illumination: 0.4 lux (F1.6) in color mode

0.04 lux (F1.6) in monochrome mode E. Dynamic Range: 69 dB F. Lens: 4.7-84.6 mm, F1.6, auto iris, remote focus and zoom G. Angle of View: 3° - 52° H. Image Rate: 30 (all resolutions) I. Resolution Scaling: Down to 768 x 432




A. Dimensions: 156 mm x 69 mm x 64 mm; 6.1” x 2.7” x 2.5” B. Weight: 0.56 kg (1.2 lbs) C. Camera Mount: 1/4” UNC-20 (top & bottom) D. Operating Temperature: -10°C to +50°C (14°F to 122°F) E. Storage Temperature: -10°C to +70°C (14°F to 158°F) F. Humidity: 20 - 80%, relative humidity (non-condensing)


A. 1.0-H3-B1 1.0 Megapixel Day/Night H.264 HD 4.7-84.6mm Camera B. 2.0-H3-B1 2.0 Megapixel Day/Night H.264 HD 4.7-84.6mm Camera

(-H3-BO-IR) HD BULLET CAMERA

The High Definition H.264 IP Bullet Camera Series shall be ONVIF compliant.

The High Definition H.264 IP Bullet Camera Series shall have a built-in web server to make video and



The High Definition H.264 IP Bullet Camera Series shall support a mode that automatically removes the

IR filter and enters a monochrome mode when the available light drops below a set threshold.

The High Definition H.264 IP Bullet Camera Series shall have an audio input for connecting external

microphones.


Phone 615-754-2554 Fax 615-754-7225

The High Definition H.264 IP Bullet Camera Series shall have an audio output for connecting external

speakers.

The High Definition H.264 IP Bullet Camera Series shall be functional in outdoor environments.

The High Definition H.264 IP Bullet Camera Series shall have a built in heater.

The High Definition H.264 IP Bullet Camera Series shall have built in IR Illumination.

The High Definition H.264 IP Bullet Camera Series (with H3-BO1-IR) shall provide uniform illumination in

the dark under 0 lux, up to a maximum distance of 30 m (100 ft).

The High Definition H.264 IP Bullet Camera Series (with H3-BO2-IR) shall provide uniform illumination in

the dark under 0 lux, up to a maximum distance of 60 m (200 ft).

The High Definition H.264 IP Bullet Camera Series shall provide zoom adaptive IR for the most effective

illumination at all zoom positions.

The High Definition H.264 IP Bullet Camera Series shall provide content adaptive IR to prevent image

saturation while maintaining optimum scene illumination.

The High Definition H.264 IP Bullet Camera Series shall have a configuration Ethernet port for easy

installation.


A. Image Sensor: 1,2&3MP – WDR 1/3” progressive scan CMOS 5MP – 1/3.2” progressive scan CMOS

B. Active Pixels: 1MP – 1280 (H) x 720 (V) 2MP – 1920 (H) x 1080 (V)

3MP – 2048 (H) x 1536 (V)

5MP – 2592 (H) x 1944 (V) C. Imaging Area: 1&2MP – 4.2 mm (H) x 2.4 mm (V); 0.165" (H) x 0.094" (V)

3MP – 4.5 mm (H) x 3.4 mm (V); 0.177” (H) x 0.133” (V) 5MP – 4.6 mm (H) x 3.4 mm (V); 0.181” (H) x 0.133” (V)

D. Illumination Technology: High power IR LEDs E. Maximum IR Illumination

Distance at 0 lux: BO1 – 30 m (100 ft) BO2 – 60 m (200 ft)

F. Wavelength: 850 nm G. Minimum Illumination: 1,2&3MP – BO1: 0.2 lux (F1.2) in color mode;

BO2: 0.4 lux (F1.6) in color mode;

5MP – BO1: 0.3 lux (F1.2) in color mode;


Phone 615-754-2554 Fax 615-754-7225

BO2: 0.6 lux (F1.6) in color mode;

0 lux in monochrome mode with IR Illumination H. Dynamic Range: 100 dB I. Lens: BO1 – 3-9 mm, F1.2, P-iris, remote focus and zoom

BO2 – 9-22 mm, F1.6, P-iris, remote focus and zoom J. Angle of View: 1&2MP – BO1: 26° - 79°; BO2: 11º - 26º

3&5MP – BO1: 28° - 84°; BO2: 11º - 28º 5MP – BO1: 28° - 84°; BO2: 12º - 28º

K. Image Compression Method: H.264 (MPEG-4 Part 10/AVC), Motion JPEG L. Image Rate: 1&2MP – 30 (all resolutions)

3MP – 20 (at full resolution), 30 (at 1920 x 1080 or smaller)

5MP – 13 (at full resolution), 30 (at 1920 x 1080 or smaller) M. Streaming: Multi-stream H.264 and motion JPEG N. Motion Detection: Selectable sensitivity and threshold O. Electronic Shutter Control: Automatic, Manual (1/6 to 1/8000 sec) P. Iris Control: Automatic, Manual Q. Day/Night Control: Automatic, Manual R. Flicker Control: 50 Hz, 60 Hz S. White Balance: Automatic, Manual T. Privacy Zone: Up to 4 zones U. Audio Input/Output: Line input/output, I/O mini-jack (3.5 mm) V. Audio Compression Method: G.711 PCM 8kHz W. External I/O Terminals: Alarm In, Alarm Out


A. Power Consumption: 22 W with external power 12.95 W with IEEE 802.3af Class 3 PoE

B. Power Source: 12 V DC, +/-10%, 22 W min 24 V AC, +/-10%, 28 VA min PoE: IEEE 802.3af Class 3 compliant


A. Network: 100BASE-TX

B. Cabling: CAT5

C. Connector: RJ-45

D. API: ONVIF compliant (www.onvif.org)

E. Security: Password protection, HTTPS encryption, digest

authentication, WS authentication, user access log.

F. Protocols: IPv4, HTTP, HTTPS, SOAP, DNS, NTP, RTSP, RTCP, RTP, TCP,

UDP, IGMP, ICMP, DHCP, Zeroconf, ARP

G. Streaming Protocols: RTP/UDP, RTP/UDP multicast, RTP/RTSP/TCP, RTP/RTSP/

HTTP/TCP, RTP/RTSP/HTTPS/TCP, HTTP



Phone 615-754-2554 Fax 615-754-7225

A. Dimensions: 241.7 mm x 94.9 mm x 70 mm

9.5” x 3.7” x 2.8”

B. Weight: 1.15 kg (2.5 lbs)

C. Body: Aluminum

D. Housing: Surface mount, tamper resistant

E. Finish: Powder coat, cool gray 2

F. Adjustment Range: ±175° pan, 0-90° tilt, ±175° azimuth

G. Operating Temp: -40°C to +50°C (-40°F to 122°F)

H. Storage Temp: -10°C to +70°C (14°F to 158°F)

I. Humidity: 20 - 80%, relative humidity (non-condensing)


A. Certifications:

• UL 60950

• CSA60950

• CB Scheme

• CE

• ROHS

• WEEE

• UVV

• C-Tick

B. Environmental:

• IK10 Impact Rating

• Meets IP66 Weather Rating

C. Electromagnetic Emissions:

• FCC Part 15 Subpart B Class B

• IC ICES-003 Class B

• EN 55022 Class B

D. Electromagnetic Immunity:


• EN 61000-4-2

• EN 61000-4-3

• EN 61000-4-4

• EN 61000-4-5

• EN 61000-4-6

• EN 61000-4-11

Part Numbers & Accessories


Phone 615-754-2554 Fax 615-754-7225

A. 1.0W-H3-BO1-IR 1.0 Megapixel WDR 3-9 mm HD Bullet Camera B. 1.0W-H3-BO2-IR 1.0 Megapixel WDR 9-22 mm HD Bullet Camera C. 2.0W-H3-BO1-IR 2.0 Megapixel WDR 3-9 mm HD Bullet Camera D. 2.0W-H3-BO2-IR 2.0 Megapixel WDR 9-22 mm HD Bullet Camera E. 3.0W-H3-BO1-IR 3.0 Megapixel WDR 3-9 mm HD Bullet Camera F. 3.0W-H3-BO2-IR 3.0 Megapixel WDR 9-22 mm HD Bullet Camera G. 5.0-H3-BO1-IR 5.0 Megapixel 3-9 mm HD Bullet Camera H. 5.0-H3-BO2-IR 5.0 Megapixel 9-22 mm HD Bullet Camera

(-H3PTZ-DP20) DAY/NIGHT 20X HD PTZ PENDANT DOME CAMERA

The Day/Night 20x HD PTZ Pendant Dome Camera shall be ONVIF compliant.

The Day/Night 20x HD PTZ Pendant Dome Camera shall have a built-in web server to make video and



The Day/Night 20x HD PTZ Pendant Dome Camera shall support a mode that automatically removes the

IR filter and enters a monochrome mode when the available light drops below a set threshold.

The Day/Night 20x HD PTZ Pendant Dome Camera shall support user configuration of up to 4 privacy

zones and 3D privacy mask within the camera field of view.

The Day/Night 20x HD PTZ Pendant Dome Camera shall support remote zoom and focus control of the

lens and performing automatic focus.

The Day/Night 20x HD PTZ Pendant Dome Camera shall have an audio input for connecting external

microphones.

The Day/Night 20x HD PTZ Pendant Dome Camera shall have an audio output for connecting external

speakers.

The Day/Night 20x HD PTZ Pendant Dome Camera shall have a video output for connecting external

monitors.

The Day/Night 20x HD PTZ Pendant Dome Camera shall support 360 degree endless rotation.

The Day/Night 20x HD PTZ Pendant Dome Camera shall support pan movements up to 450 degrees per

second.

The Day/Night 20x HD PTZ Pendant Dome Camera shall support E-Flip to automatically rotate the image

when the camera tilts through the zenith.


Phone 615-754-2554 Fax 615-754-7225

The Day/Night 20x HD PTZ Pendant Dome Camera shall have tamper resistant screws.

The Day/Night 20x HD PTZ Pendant Dome Camera shall be functional in outdoor environments.

The Day/Night 20x HD PTZ Pendant Dome Camera shall have a pendant mount bracket.

The Day/Night 20x HD PTZ Pendant Dome Camera shall have 2 built in heaters.


A. Image Sensor: WDR 1/2.8” progressive scan CMOS B. Active Pixels: 1MP – 1280 (H) x 720 (V)

2MP – 1920 (H) x 1080 (V) C. Imaging Area: 4.8 mm (H) x 2.7 mm (V); 0.189" (H) x 0.106" (V) D. Minimum Illumination: 0.4 lux (F1.6) in color mode; 0.04 lux (F1.6) in monochrome

mode E. Dynamic Range: 100 dB F. Lens: 4.7-94 mm, 20x zoom, F1.6 and automatic focus G. Angle of View: 2.9° - 55.2° H. Image Compression Method: H.264 (MPEG-4 Part 10/AVC), Motion JPEG I. Image Rate: 30 (all resolutions) J. Streaming: Multi-stream H.264 and motion JPEG K. Resolution Scaling: Down to 352 x 240 L. Motion Detection: Selectable sensitivity and threshold M. Electronic Shutter Control: Automatic, Manual (1/6 to 1/8000 sec) N. Iris Control: Automatic, Manual O. Day/Night Control: Automatic, Manual P. Flicker Control: 50 Hz, 60 Hz Q. White Balance: Automatic, Manual R. Privacy Zone: Up to 4 zones, 3D privacy mask supported S. Presets: 100 named presets T. Tours: 10 named guard tours U. Audio Input/Output: Line input/output V. Audio Compression Method: G.711 PCM 8kHz W. Video Output: NTSC/PAL, A/V mini-jack (3.5 mm) X. External I/O Terminals: 2 Alarm In, 2 Alarm Out


A. Power Consumption: 55 VA with AC power 44 W with DC power

25.5 W with IEEE 802.3at Class 4 PoE Plus B. Power Source: 24 VAC +/- 10%

24 VDC +/- 10%

PoE: IEEE 802.3at Class 4 PoE Plus compliant C. Power Connector: Waterproof 2-pin connector


Phone 615-754-2554 Fax 615-754-7225



authentication, WS authentication, user access log. F. Protocols: IPv4, HTTP, HTTPS, SOAP, DNS, NTP, RTSP, RTCP, RTP,

TCP,UDP, IGMP, ICMP, DHCP, Zeroconf, ARP, LLDP G. Streaming Protocols: RTP/UDP, RTP/UDP multicast, RTP/RTSP/TCP,

RTP/RTSP/HTTP/TCP, RTP/RTSP/HTTPS/TCP, HTTP


A. Dimensions: 226 mm x 299.77 mm 8.9” x 11.8”

B. Weight: 3.9 kg (8.6 lbs) C. Dome Bubble: Acrylic, clear D. Body: Aluminum E. Housing: Pendant mount F. Finish: Powder coat, cool gray 2 G. Tilt: 186°, E-flip, 0.05 - 360°/sec H. Pan: 360°, endless, 0.05 - 450°/sec I. Operating Temp: -45 °C to + 50 °C (-50 °F to 122 °F) with external power

-30°C to +50°C (-22°F to 122°F) with IEEE 802.3at Class 4 PoE Plus power J. Storage Temp: -10°C to +70°C (14°F to 158°F) K. Humidity: 20 - 80%, relative humidity (non-condensing)


A. Certifications:

• UL 60950

• CSA60950

• CB Scheme

• CVV

• C-Tick

B. Environmental:

• IK09 Impact Rating

• Meets IP66 Weather Rating

C. Electromagnetic Emissions:

• FCC Part 15 Subpart B Class B


Phone 615-754-2554 Fax 615-754-7225

• IC ICES-003 Class B


D. Electromagnetic Immunity:


• EN 61000-4-2

• EN 61000-4-3

• EN 61000-4-4

• EN 61000-4-5

• EN 61000-4-6

• EN 61000-4-11


A. 1.0W-H3PTZ-DP20 1.0 Megapixel Day/Night 20x HD PTZ Pendant Dome Camera

B. 2.0W-H3PTZ-DP20 2.0 Megapixel Day/Night 20x HD PTZ Pendant Dome Camera

C. MNT-PEND-WALL Indoor/Outdoor Pendant Mount Bracket D. H3PTZ-DP-SMOKE: Dome Camera Cover with Smoked Bubble

(-HD-) HIGH DEFINITION JPEG2000 DAY/NIGHT IP CAMERA SERIES


A. Motion Detection Selectable sensitivity and threshold B. Electronic Shutter Control: Automatic, Manual (2 to 1/30,000 sec) C. Iris Control: Automatic, Manual D. Day/Night Control: Automatic, Manual E. Flicker Control: 50 Hz, 60 Hz F. White Balance: Automatic, Manual G. Backlight Compensation: Automatic H. Privacy Zones: Up to 4 zones I. External I/O Terminals: Alarm In, Alarm Out; terminal strip J. Serial Communications: RS-485; terminal strip


A. Power Source: PoE: IEEE 802.3af Class 3 compliant 24 VAC, 12 VDC

B. Power Connector: 2-pin terminal block


Phone 615-754-2554 Fax 615-754-7225


A. Network: 100Base-TX B. Cabling Type: CAT5 C. Connector: RJ-45 D. Security: SSL E. Protocols: UDP, TCP, SOAP, DHCP, Zeroconf



B. Electromagnetic Emissions: FCC Part 15 Subpart B Class A IC ICES-003 Class A EN 55022 Class A EN 61000-6-3 EN 61000-3-2 EN 61000-3-3

C. Electromagnetic Immunity: EN 50130-4 EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 EN 61000-4-11

(-HD-DN) DAY/NIGHT JPEG2000 HD CAMERA

The Day/Night JPEG2000 HD Camera shall support user selectable image dimensions, or windowing, to

enable lower bandwidth and/or higher refresh rates for the image or portion of the image being

monitored.



The Day/Night JPEG2000 HD Camera shall incorporate a removable IR filter mechanism for improved

performance in low light, night time conditions or in applications requiring near IR illumination.

The Day/Night JPEG2000 HD Camera shall have a RS-485 serial port for controlling PTZ devices.


Phone 615-754-2554 Fax 615-754-7225


A. Image Sensor: 1MP – 1/3” progressive scan CMOS 2&5MP – 1/2.5” progressive scan CMOS

3MP – 1/2” progressive scan CMOS B. Active Pixels: 1MP – 1280 (H) x 720 (V)

2MP – 1920 (H) x 1080 (V)

3MP – 2048 (H) x 1536 (V)

5MP – 2592 (H) x 1944 (V) C. Imaging Area: 4.1 mm (H) x 2.3 mm (V); 0.162" (H) x 0.091" (V)

6.1 mm (H) x 3.5 mm (V); 0.240" (H) x 0.138" (V)

6.6 mm (H) x 4.9 mm (V); 0.258" (H) x 0.194" (V)

5.7 mm (H) x 4.3 mm (V); 0.225" (H) x 0.169" (V) D. Minimum Illumination: 1-3MP – 0.2 lux (F1.4) in color mode;


5MP – 0.3 lux (F1.4) in color mode;

0.03 lux (F1.4) in monochrome mode E. Dynamic Range: 1,2&3MP – 61 dB

5MP – 70 dB F. Lens Mount: CS, C with adapter G. Image Compression Method: JPEG2000 H. Image Rate: 1MP – 39 @ full resolution

2MP – 18 @ full resolution; 39 @ 1280 x 720 or smaller


5MP – 12 @ full resolution; 30 @ 1920 x 1080 or smaller I. Resolution Windowing: Down to 640 x 480 window




A. Dimensions: 85 mm x 67 mm x 53 mm 3.3” x 2.6” x 2.1”

B. Weight: 0.53 kg (1.2 lbs) C. Camera Mount: 1/4” UNC-20 (top & bottom) D. Operating Temperature: -10°C to +50°C (14°F to 122°F) E. Storage Temperature: -10°C to +70°C (14°F to 158°F) F. Humidity: 20 - 80%, relative humidity (non-condensing)


Phone 615-754-2554 Fax 615-754-7225


A. 1.0MP-HD-DN 1.0 Megapixel Day/Night JPEG2000 HD Camera B. 2.0MP-HD-DN 2.0 Megapixel Day/Night JPEG2000 HD Camera C. 3.0MP-HD-DN 3.0 Megapixel Day/Night JPEG2000 HD Camera D. 5.0MP-HD-DN 5.0 Megapixel Day/Night JPEG2000 HD Camera

(-HD-DOME-DN) DAY/NIGHT JPEG2000 HD DOME CAMERA

The Day/Night JPEG2000 Dome Camera shall support user selectable image dimensions, or windowing,

to enable lower bandwidth and/or higher refresh rates for the image or portion of the image being

monitored.



The Day/Night JPEG2000 Dome Camera shall incorporate a removable IR filter mechanism for improved

performance in low light, night time conditions or in applications requiring near IR illumination.

The Day/Night JPEG2000 Dome Camera shall support a mode that automatically removes the IR filter

and enters a monochrome mode when the available light drops below a set threshold.

The Day/Night JPEG2000 Dome Camera shall have an integrated IR illuminator with a 15 m (50 ft) range

and an 850 nm wavelength.

The Day/Night JPEG2000 Dome Camera shall have a 3-axis pan-tilt-twist gimbal system for positioning

the lens and image sensor.

The Day/Night JPEG2000 Dome Camera shall be functional in both indoor and outdoor environments.

The Day/Night JPEG2000 Dome Camera shall be conduit compatible for easy installation onto standard

electrical fittings.

The Day/Night JPEG2000 Dome Camera shall have an impact resistant construction.

The Day/Night JPEG2000 Dome Camera shall have a pendant mount bracket.

The Day/Night JPEG2000 Dome Camera shall have a ceiling mount bracket.



Phone 615-754-2554 Fax 615-754-7225

A. Image Sensor: 1MP – 1/3” progressive scan CMOS 2&5MP – 1/2.5” progressive scan CMOS

3MP – 1/2” progressive scan CMOS B. Active Pixels: 1MP – 1280 (H) x 720 (V)

2MP – 1920 (H) x 1080 (V)

3MP – 2048 (H) x 1536 (V)

5MP – 2592 (H) x 1944 (V) C. Imaging Area: 4.1 mm (H) x 2.3 mm (V); 0.162" (H) x 0.091" (V)

6.1 mm (H) x 3.5 mm (V); 0.240" (H) x 0.138" (V)

6.6 mm (H) x 4.9 mm (V); 0.258" (H) x 0.194" (V)

5.7 mm (H) x 4.3 mm (V); 0.225" (H) x 0.169" (V) D. Minimum Illumination: 1-3MP – 0.2 lux (F1.4) in color mode;


5MP – 0.3 lux (F1.4) in color mode;

0.03 lux (F1.4) in monochrome mode E. Dynamic Range: 1-3MP – 61 dB

5MP – 70 dB F. Lens Mount: CS, C with adapter G. Image Compression Method: JPEG2000 H. Image Rate: 1MP – 39 @ full resolution



5MP – 12 @ full resolution; 30 @ 1920 x 1080 or smaller I. Resolution Windowing: Down to 640 x 480 window


A. Power Consumption: 6W +5.5 W with heater

+3.5 with IR illuminator


A. Dimensions: 150 mm x 120 mm 5.9” x 4.7”

B. Weight: 0.91 kg (2.0 lbs) C. Dome Bubble: Polycarbonate, clear D. Body: Aluminum E. Housing: Surface mount, vandal resistant F. Finish: Powder coat, cool gray 2 G. Adjustment Range: 360° pan, 180° tilt, 180° azimuth H. Operating Temperature: -10°C to +50°C (14°F to 122°F)


Phone 615-754-2554 Fax 615-754-7225

-30°C to +50°C (-22°F to 122°F) with heater I. Storage Temperature: -10°C to +70°C (14°F to 158°F) J. Humidity: 20 - 80%, relative humidity (non-condensing)




A. 1.0MP-HD-DOME-DN 1.0 Megapixel Day/Night JPEG2000 HD Dome Camera B. 2.0MP-HD-DOME-DN 2.0 Megapixel Day/Night JPEG2000 HD Dome Camera C. 3.0MP-HD-DOME-DN 3.0 Megapixel Day/Night JPEG2000 HD Dome Camera D. 5.0MP-HD-DOME-DN 5.0 Megapixel Day/Night JPEG2000 HD Dome Camera E. 1.0MP-HD-DOME-DN-H 1.0 Megapixel Day/Night JPEG2000 HD Dome Camera with

Heater F. 2.0MP-HD-DOME-DN-H 2.0 Megapixel Day/Night JPEG2000 HD Dome Camera with

Heater G. 3.0MP-HD-DOME-DN-H 3.0 Megapixel Day/Night JPEG2000 HD Dome Camera with

Heater H. 5.0MP-HD-DOME-DN-H 5.0 Megapixel Day/Night JPEG2000 HD Dome Camera with

Heater I. 1.0MP-HD-DOME-DN-IR 1.0 Megapixel Day/Night JPEG2000 HD Dome Camera with

IR Illuminator J. 2.0MP-HD-DOME-DN-IR 2.0 Megapixel Day/Night JPEG2000 HD Dome Camera with

IR Illuminator K. 3.0MP-HD-DOME-DN-IR 3.0 Megapixel Day/Night JPEG2000 HD Dome Camera with

IR Illuminator L. 5.0MP-HD-DOME-DN-IR 5.0 Megapixel Day/Night JPEG2000 HD Dome Camera with

IR Illuminator M. 1.0MP-HD-DOME-DN-H-IR 1.0 Megapixel Day/Night JPEG2000 HD Dome Camera with

Heater and IR Illuminator N. 2.0MP-HD-DOME-DN-H-IR 2.0 Megapixel Day/Night JPEG2000 HD Dome Camera with

Heater and IR Illuminator O. 3.0MP-HD-DOME-DN-H-IR 3.0 Megapixel Day/Night JPEG2000 HD Dome Camera with

Heater and IR Illuminator P. 5.0MP-HD-DOME-DN-H-IR 5.0 Megapixel Day/Night JPEG2000 HD Dome Camera with

Heater and IR Illuminator Q. DOME-INDE-PLT Indoor Electrical Box Mounting Plate R. DOME-IND-CEL Indoor In-Ceiling Mount S. DOME-OD-BASE Indoor/Outdoor Mounting Base T. DOME-OD-PEND Indoor/Outdoor Pendant Mount U. DOME-SMOKE Replacement Smoked Transparent Cover

(HD-DOME-180/360) JPEG2000 COLOR HD PANORAMIC DOME CAMERA

The JPEG2000 Color HD Panoramic Dome Camera shall have a 180° or 360° field of view.


Phone 615-754-2554 Fax 615-754-7225

The JPEG2000 Color HD Panoramic Dome Camera shall be functional in both indoor and outdoor

environments.

The JPEG2000 Color HD Panoramic Dome Camera shall be conduit compatible for easy installation onto

standard electrical fittings.

The JPEG2000 Color HD Panoramic Dome Camera shall have tamper resistant screws.

The JPEG2000 Color HD Panoramic Dome Camera shall have an impact resistant construction.

The JPEG2000 Color HD Panoramic Dome Camera shall have a pendant mount bracket.

The JPEG2000 Color HD Panoramic Dome Camera shall have a ceiling mount bracket.

Camera Specification

A. Image Sensor: 4 x 1/4” progressive scan CMOS B. Active Pixels: 1600 (H) x 1200 (V) C. Imaging Area: 3.5 mm (H) x 2.7 mm (V); 0.138" (H) x 0.106" (V) D. Minimum Illumination: 0.6 lux (F2.0) E. Dynamic Range: 70 dB F. Lens: F2.0/4.4 mm G. Image Compression Method: JPEG2000 H. Image Rate: 7 per sensor


A. Power Consumption: 9W +5 W with heater


B. Dimensions: 150 mm x 120 mm 5.9” x 4.7”

C. Weight: 0.91 kg (2.0 lbs) D. Dome Bubble: Polycarbonate, clear E. Body: Aluminum F. Housing: Surface mount, vandal resistant G. Finish: Powder coat, cool gray 2 H. Adjustment Range: 360° pan, 180° tilt, 180° azimuth I. Operating Temperature: -10°C to +50°C (14°F to 122°F)

-30°C to +50°C (-22°F to 122°F) with heater J. Storage Temperature: -10°C to +70°C (14°F to 158°F) K. Humidity: 20 - 80%, relative humidity (non-condensing)


Phone 615-754-2554 Fax 615-754-7225




A. 8.0MP-HD-DOME-180 8.0 Megapixel Color JPEG2000 HD 180° Panoramic Dome Camera

B. 8.0MP-HD-DOME-360 8.0 Megapixel Color JPEG2000 HD 360° Panoramic Dome Camera

C. 8.0MP-HD-DOME-180-H 8.0 Megapixel Color JPEG2000 HD 180° Panoramic Dome Camera with Heater

D. 8.0MP-HD-DOME-360-H 8.0 Megapixel Color JPEG2000 HD 360° Panoramic Dome Camera with Heater

E. DOME-INDE-PLT Indoor Electrical Box Mounting Plate F. DOME-IND-CEL Indoor In-Ceiling Mount G. DOME-OD-BASE Indoor/Outdoor Mounting Base H. DOME-OD-PEND Indoor/Outdoor Pendant Mount I. DOME-SMOKE Replacement Smoked Transparent Cover

(-HD-PRO-C/M) JPEG2000 HD PRO CAMERA SERIES

The JPEG2000 HD Pro Camera shall support user selectable image dimensions, or windowing, to enable

lower bandwidth and/or higher refresh rates for the image or portion of the image being monitored.

The JPEG2000 HD Pro Camera shall support user selectable image dimensions, or windowing, to enable

lower bandwidth and/or higher refresh rates for the image or portion of the image being monitored.

The JPEG2000 HD Pro Camera shall support user configuration of image acquisition parameters

including: Exposure Control; Flicker Control; Auto-Iris Control; and Focus Control for EF-mount lenses.

The JPEG2000 HD Pro Camera shall have a RS-485 serial port for controlling PTZ devices.

Camera Specification

A. Image Sensor: 8MP – 4/3” format progressive scan CCD 11MP-29MP – 35mm progressive scan CCD

B. Active Pixels: 8MP – 3296 (H) x 2472 (V) 11MP – 4000 (H) x 2672 (V)

16MP – 4864 (H) x 3248 (V)

29MP – 6576 (H) x 4384 (V)


Phone 615-754-2554 Fax 615-754-7225

C. Imaging Area: 8MP – 18.1mm (H) x 13.6 mm (V), 0.713" (H) x 0.535" (V) 11MP – 37.3 mm (H) x 25.7 mm (V) 1.468" (H) x 1.012" (V)

16MP – 36.1mm (H) x 24.0 mm (V), 1.421" (H) x 0.945" (V)

29MP – 36.1mm (H) x 24.0 mm (V), 1.421" (H) x 0.945" (V) D. Minimum Illumination: Color: 0.1 lux (F1.4)

Monochrome: 0.01 lux (F1.4) E. Dynamic Range: 64 dB F. Lens Mount: EF (SLR-style bayonet) G. Image Compression Method: JPEG2000 H. Image Rate: 7 @ full resolution I. Resolution Windowing: Down to 640 x 480 window J. Motion Detection Selectable sensitivity and threshold K. Electronic Shutter Control: Automatic, Manual (2 to 1/60,000 sec) L. Iris Control: Automatic, Manual M. Focus Control: Automatic, Manual N. Flicker Control: 50 Hz, 60 Hz O. White Balance: Automatic, Manual P. Backlight Compensation: Automatic Q. Privacy Zones: Up to 4 zones R. External I/O Terminals: Alarm In, Alarm Out; terminal strip S. Serial Communications: RS-485; terminal strip


A. Power Consumption: 9W maximum B. Power Source: PoE: IEEE 802.3af Class 3 compliant

24 VAC, 12 VDC C. Power Connector: 2-pin terminal block




A. Dimensions: 120 mm x 79 mm x 74 mm ; 4.7” x 3.1” x 2.9” B. Weight: 1.15 kg (2.5 lbs) C. Camera Mount: 1/4” UNC-20 (top & bottom) D. Operating Temperature: -10°C to +50°C (14°F to 122°F) E. Storage Temperature: -10°C to +70°C (14°F to 158°F) F. Humidity: 20 - 80%, relative humidity (non-condensing)


Phone 615-754-2554 Fax 615-754-7225


A. 8MP-HD-PRO-C 8.0 Megapixel Color JPEG2000 HD Pro Camera B. 8MP-HD-PRO-M 8.0 Megapixel Monochrome JPEG2000 HD Pro Camera C. 11MP-HD-PRO-C 11.0 Megapixel Color JPEG2000 HD Pro Camera D. 11MP-HD-PRO-M 11.0 Megapixel Monochrome JPEG2000 HD Pro Camera E. 16MP-HD-PRO-C 16.0 Megapixel Color JPEG2000 HD Pro Camera F. 16MP-HD-PRO-M 16.0 Megapixel Monochrome JPEG2000 HD Pro Camera G. 29MP-HD-PRO-C 29.0 Megapixel Color JPEG2000 HD Pro Camera H. 29MP-HD-PRO-M 29.0 Megapixel Monochrome JPEG2000 HD Pro Camera

(-HD-LP-) LICENSE PLATE RECOGNITION CAMERA SERIES

The License Plate Recognition Camera Series shall detect license plates on vehicles travelling up to 60

mph or 100 kph when installed in the overhead position at the recommended mounting height.

The License Plate Recognition Camera Series shall detect license plates in all lighting conditions,

including a minimum illumination of 0 lux.


A. Image Sensor: 1/2” progressive scan CMOS B. Illuminator Technology: High-power SMT LED C. Wavelength: 850 nm D. Dynamic Range: 61 dB E. Image Compression Method:JPEG2000 F. Image Rate: 30 G. Motion Detection Selectable sensitivity and threshold H. Electronic Shutter Control: Automatic, Manual (2 to 1/30,000 sec) I. Iris Control: Automatic, Manual J. Focus Control: Automatic, Manual K. Flicker Control: 50 Hz, 60 Hz L. White Balance: Automatic, Manual M. Backlight Compensation: Automatic N. External I/O Terminals: Alarm In, Alarm Out; terminal strip O. Serial Communications: RS-485; terminal strip


Camera:

A. Power Consumption: 6 W maximum B. Power Source: PoE: IEEE 802.3af Class 3 compliant

24 VAC, 12 VDC C. Power Connector: 2-pin terminal block


Phone 615-754-2554 Fax 615-754-7225

Illuminator:

A. Power Consumption: 72 W B. Power Source: 24 VAC, 24 VDC C. Power Connector: 3-wire terminal block, 12-20 AWG




A. Operating Temp: -10°C to +45°C (14°F to 113°F) B. Storage Temperature: -10°C to +70°C (14°F to 158°F) C. Humidity: 20 - 80%, relative humidity (non-condensing)

Camera:


B. Weight: 0.53 kg (1.2 lbs) C. Mount: 1/4” UNC-20 (top & bottom)

Enclosure:


B. Weight: 4.0 kg (8.8 lbs) C. Mount: 4 x M5 holes at 40 mm x 62 mm (1.57” x 2.44”)

Illuminator Power Supply:


B. Weight: 1.85 kg (4.1 lbs) C. Mount: 4 x M4 holes at 145 mm x 123 mm (5.71” x 4.85”)



Phone 615-754-2554 Fax 615-754-7225

A. Certifications:

• UL 60950

• CSA60950

• EN 60950-1

• CE

• ROHS

• WEEE

(1L-HD-LP-) SINGLE LANE LICENSE PLATE RECOGNITION CAMERA

The Single Lane License Plate Recognition Camera shall support the detection of license plates within

one vehicle road lane or approximately 10 ft (3 m).


A. Resolution: 1280 (H) x 720 (V) B. Lens: (35) – 16mm, f/4

(50) – 25mm, f/4 (75) – 35mm, f/2.8 (100) – 50mm, f/2.8

C. Recommended Target Distance: (35) – 35 ft (11 m) (50) – 50 ft (15 m) (75) – 75 ft (23 m)

(100) – 100 ft (30 m) D. Recommended Overhead

Mounting Height: (35) – 9-12 ft (2.8-3.6 m) (50) – 13-17 ft (4.0-5.2 m)

(75) – 19-26 ft (5.9-7.8 m)

(100) – 26-34 ft (7.9-10.0 m) E. Maximum Overhead

Mounting Height: (35) – 18 ft (5.5 m) (50) – 25 ft (7.5 m)

(75) – 38 ft (11 m)

(100) – 50 ft (15 m) F. Maximum Roadside

Mounting Height: (35) – 12 ft (3.6 m) (50) – 17 ft (5.2 m)

(75) – 26 ft (7.8 m)

(100) – 34 ft (10 m) G. Maximum Roadside Offset: (35) – 12 ft (3.6 m)

(50) – 17 ft (5.2 m)


Phone 615-754-2554 Fax 615-754-7225

(75) – 26 ft (7.8 m)

(100) – 34 ft (10 m)


A. 1L-HD-LP-35 35 ft (11 m) Single Lane License Plate Recognition Capture Kit

B. 1L-HD-LP-50 50 ft (15 m) Single Lane License Plate Recognition Capture Kit

C. 1L-HD-LP-75 75 ft (23 m) Single Lane License Plate Recognition Capture Kit

D. 1L-HD-LP-100 100 ft (30 m) Single Lane License Plate Recognition Capture Kit

(2L-HD-LP-) DUAL LANE LICENSE PLATE RECOGNITION CAMERA

The Dual Lane License Plate Recognition Camera shall support the detection of license plates within two

vehicle road lane or approximately 20 ft (6 m).


A. Resolution: 2592 (H) x 720 (V) B. Lens: 12.5 mm, f/2.8 C. Recommended Target D. Distance: 40 ft (12 m) E. Recommended Overhead F. Mounting Height: 10-14 ft (3.1-4.2 m) G. Maximum Overhead H. Mounting Height: 20 ft (6.1 m)


A. 2L-HD-LP-40 Dual Lane, High Definition, License Plate Recognition Camera

(ENC-4P-H264) 4-PORT H.264 ANALOG VIDEO ENCODER WITH AUDIO

SUPPORT

The Analog Video Encoder shall support H.264 (MPEG-4 Part 10/AVC) and Motion JPEG compression

algorithms.


Phone 615-754-2554 Fax 615-754-7225

The Analog Video Encoder shall support motion adaptive 3D deinterlacing to improve image accuracy

and sharpness with fast motion and film video source processing.

The Analog Video Encoder shall be ONVIF compliant.

The Analog Video Encoder shall have a built-in web server to make video and configuration available in a

standard browser environment. The built-in web server shall support multiple users with different

permission levels and unique usernames and passwords.

The Analog Video Encoder shall support user configuration of compression quality and bandwidth

parameters per individual video channel including: Image Rate; Maximum Bit Rate; and Keyframe

Interval.

The Analog Video Encoder shall have 4 video inputs.

The Analog Video Encoder shall have 4 audio inputs and 4 audio outputs.

The Analog Video Encoder shall support user configuration of video input termination.

The Analog Video Encoder shall have video input status LEDs for each channel that indicates when a

video signal has been detected.

The Analog Video Encoder shall have 4 input and 4 output terminals for connecting alarm inputs and

alarm outputs.

The Analog Video Encoder shall have a RS-485 serial port for controlling PTZ devices.

Encoder Specifications

A. Video Channels: 4 B. Video Standard: NTSC, PAL C. Video Format: Composite Video D. Video Input: BNC 1.0 Vpp with 75 Ohm selectable termination E. Audio Input Channels: 4 F. Audio Output Channels: 4 G. Audio Compression Method: G.711 PCM 8kHz H. Audio Connection: Line I/O mini-jack (3.5 mm) I. Max Resolution: 720 (H) x 480 (V) NTSC

720 (H) x 576 (V) PAL J. Image Compression Method: H.264 (MPEG-4 Part 10/AVC), Motion JPEG K. Image Rate: 30 NTSC; 25 PAL (all resolutions) L. Motion Detection: Selectable sensitivity and threshold M. Privacy Zones: Up to 4 zones N. External I/O Terminals: 4 Alarm In, 4 Alarm Out; terminal strip O. Serial Communications: RS-485; terminal strip


Phone 615-754-2554 Fax 615-754-7225


A. Power Consumption: 8 W B. Power Source: PoE: IEEE 802.3af Class 3 compliant

24 VAC, 12-24 VDC C. Power Connector: 2 pin terminal block



authentication, WS authentication, user access log. F. Protocols: IPv4, HTTP, HTTPS, SOAP, DNS, NTP, RTSP, RTCP, RTP, TCP,

UDP, IGMP, ICMP, DHCP, Zeroconf, ARP G. Streaming Protocols: RTP/UDP, RTP/UDP multicast, RTP/RTSP/TCP, RTP/RTSP/

HTTP/TCP, RTP/RTSP/HTTPS/TCP, HTTP



B. Weight: 0.62 kg (1.4 lbs) C. Operating Temp: 12VDC: -10 °C to +48 °C (14 °F to 118 °F)

24VAC or POE: -10 °C to +50 °C (14 °F to 122 °F) D. Storage Temp: -10°C to +70°C (14°F to 158°F) E. Humidity: 20 - 80%, relative humidity (non-condensing)



B. Electromagnetic Emissions: FCC Part 15 Subpart B Class A IC ICES-003 Class A EN 55022 Class A

C. Electromagnetic Immunity:


Phone 615-754-2554 Fax 615-754-7225

EN 55024 EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 EN 61000-4-11


A. ENC-4P-H264 4-Port H.264 Analog Video Encoder with Audio Support B. ENC-BRK1U 1U EIA (19”) Rack Mountable Bracket for 3 ENC-4P-H264

(-NVR-) HD NETWORK VIDEO RECORDER

The HD Network Video Recorder shall be preloaded with the Avigilon Control Center (ACC) software

version 4.12 or later.

The HD Network Video Recorder shall use a facility’s existing IT infrastructure and require no special

cabling.

The HD Network Video Recorder shall run Microsoft Windows with configurable storage.

The HD Network Video Recorder shall be accessible by remote clients.

The HD Network Video Recorder shall meet or exceed the following design and performance

specifications.

Environmental Specifications

A. Operating Temperature: 10° C to 35° C (50° F to 95° F) B. Storage Temperature: -40° C to 65° C (-40° F to 149° F) C. Humidity: 20 - 80% Relative humidity (non-condensing) D. Operating Vibration: 5 Hz to 350 Hz at 0.0002 G/Hz E. Storage Vibration: 5 Hz to 500 Hz at 0.001 to 0.01 G/Hz F. Operating Shock: Shock pulse of 40G for up to 2 ms G. Storage Shock: Shock pulse of 105G for up to 2 ms H. Operating Altitude: -15.2 m to 3048 m (-50 ft to 10,000 ft) I. Storage Altitude: -15.2 m to 10,668 m (-50 ft to 35,000 ft)

Remote PC Client Requirements


Phone 615-754-2554 Fax 615-754-7225

A. Operating System: Microsoft® Windows® XP with Service Pack (SP) 2 or later, Windows® Vista, or Windows® 7

B. Processor: Intel® Single Core 2.4 GHz (minimum); Intel® Dual Core 2.0 GHz (recommended)

C. Memory: 1 GB RAM (minimum);: 2 GB RAM (recommended) D. Video Card: PCI Express, DirectX 9.0c compliant with 128MB RAM

(Intel® GMA 900 or better, NVIDIA® 6600 or better, ATI X1300 or better) E. Network Interface: 100 Mbps (minimum); 1 Gbps (recommended) F. Hard Disk Space: 500 MB

(-HD-NVR2) NETWORK VIDEO RECORDER SERVER

The HD Network Video Recorder Server shall be scalable to include storage expansions and multiple

servers.

The HD HD Network Video Recorder Server shall record up to 32 MB/s of image data.

The HD Network Video Recorder Server shall support up to 128 camera channels.

The HD Network Video Recorder Server shall support up to 30 images per second per camera channel.

The HD Network Video Recorder Server shall have a RAID 5 hard drive configuration.

The HD Network Video Recorder Server shall support the ability to hot-swap hard drives.

The HD Network Video Recorder Server shall offer the ability to hot-swap power supplies.

The HD Network Video Recorder Server shall include 4 gigabit Ethernet ports.

The HD Network Video Recorder Server shall fit on 2U server racks.

NVR Server Specifications

A. Control Center Edition: Enterprise, Standard and Core compatible B. Recording Rate: Up to 32 MB/s C. Camera Channels: Up to 128 D. Recording Image Rate: Up to 30 images per second per channel, total of 3840 for

128 channels E. Local Viewing: No F. Operating System: Microsoft® Windows Embedded Standard 7 G. Hard Disk Drive Configuration: Near-line SAS, hot-swappable, RAID 5 H. Recording Storage Capacity: Up to 21 TB effective (after RAID 5), expandable using HD-

NVR-EXP2 I. Processor: Quad Core Intel® Xeon® 2.0 GHz J. Memory: 6 GB RAM (3 x 2GB) K. Network Interface: 4 Gigabit Ethernet RJ-45 ports (1000Base-T) L. Video Outputs: 1 VGA


Phone 615-754-2554 Fax 615-754-7225

M. Optical Drive: 1 DVD-RW


A. Power Consumption: 550 W B. Power Input: 100 to 240 VAC, 50/60 Hz, auto-switching C. Power Supply: Single hot-swappable, dual-redundant optional with HD-

NVR2-2ND-PS

Physical Specifications

A. Form Factor: 2U rack mount chassis

B. Dimensions (LxWxH): 611.1 mm x 434 mm x 86.8 mm; 24.06” x 17.09” x 3.42”

C. Weight: 28.2 kg (62.17 lbs)


A. Certifications: EN 60950-1:2006 + A11:2009 IEC 60950-1:2005 Ed2 EN 62311:2008

B. Electromagnetic Emissions: EN 55022:2006 + A1:2007 CISPR 22:2005 + A1:2005 EN 61000-3-2:2006 IEC 61000-3-2:2005 (Class D) EN 61000-3-3:1995 + A1:2001 + A2:2005 IEC 61000-3-3:1994 + A1:2001 + A2:2005

C. Electromagnetic Immunity: EN 55024:1998 + A1:2001 + A2:2003 CISPR 24:1997 (modified)+A1:2001 + A2:2002


A. Supplied accessories with all servers: Rack mount kit (brackets, rails, and hardware) Cable management arm Rack bezel USB keyboard USB mouse Power cord

B. 3.0TB-HD-NVR2 3.0 TB storage, Network Video Recorder Server C. 5.0TB-HD-NVR2 5.0 TB storage, Network Video Recorder Server D. 10.0TB-HD-NVR2 10.0 TB storage, Network Video Recorder Server E. 15.0TB-HD-NVR2 15.0 TB storage, Network Video Recorder Server F. 21.0TB-HD-NVR2 21.0 TB storage, Network Video Recorder Server


Phone 615-754-2554 Fax 615-754-7225

G. HD-NVR2-2ND-PS Secondary redundant power supply H. HD-NVR2-LPRPROC LPR processor I. HD-NVR2-EXP2-CARD Expansion card for connecting storage expansion to an HD-

NVR2 J. HD-NVR2-EXP2-10TB 10 TB RAID 6 expansion, 2U rack mount K. HD-NVR2-EXP2-20TB 20 TB RAID 6 expansion, 2U rack mount L. HD-NVR2-EXP2-30TB 30 TB RAID 6 expansion, 2U rack mount

(-HD-NVRWS) HD NETWORK VIDEO RECORDER WORKSTATION

The HD Network Video Recorder Workstation shall support standalone viewing and recording from all

connected cameras.

The HD Network Video Recorder Workstation shall record up to 10 MB/s of image data.

The HD Network Video Recorder Workstation shall support up to 64 camera channels.

The HD Network Video Recorder Workstation shall support up to 30 images per second per camera

channel.

The HD Network Video Recorder Workstation shall support up to two high resolution monitors.

NVR Workstation Specifications

A. Control Center Edition: Enterprise, Standard and Core compatible B. Recording Rate: Up to 10 MB/s C. Camera Channels: Up to 64 D. Recording Image Rate: Up to 30 images per second per channel, total of 1920 for

64 channels E. Local Viewing: Yes F. Operating System: Microsoft® Windows® 7 Professional 64-bit G. Hard Disk Drive Configuration: 1-2 SATA 7200RPM JBOD H. Recording Storage Capacity: Up to 3 TB I. Processor: Intel® Xeon® Processor E3-1220 v2 J. Memory: 4 GB RAM K. Network Interface: 1 Gigabit Ethernet RJ-45 port (1000Base-T) L. Video Outputs: 2 active (1 DisplayPort and 1 DVI) M. Optical Drive: 1 DVD-RW


A. Power Consumption: 320 W B. Power Input: 100 to 240 VAC, 50/60 Hz, auto-switching C. Power Supply: Single non-redundant


Phone 615-754-2554 Fax 615-754-7225

Physical Specifications

A. Form Factor: Desktop B. Dimensions (LxWxH): 175 mm x 360 mm x 435 mm; 6.89” x 14.17” x 17.13” C. Weight: 9.24 kg (20.35 lbs)


A. FCC, Class B B. ICES, Class B C. CE, Class B D. VCCI, Class B E. BSMI, Class B F. C-Tick, Class B G. SABS, Class B H. CCC, Class B I. BCC, Class B J. NEMKO, Class B K. GOST, Class B L. BELLIS, Class B


A. Supplied accessories with all workstations: USB keyboard USB mouse Power cord DisplayPort to DVI adapter (1 per 2 video outputs) DVI to VGA adapter (1 per 2 video outputs)

B. 500GB-HD-NVRWS 500 GB storage, Network Video Recorder Workstation C. 1.0TB-HD-NVRWS 1.0 TB storage, Network Video Recorder Workstation D. 2.0TB-HD-NVRWS 2.0 TB storage, Network Video Recorder Workstation E. 3.0TB-HD-NVRWS 3.0 TB storage, Network Video Recorder Workstation

USB PROFESSIONAL JOYSTICK KEYBOARD

The USB Professional Joystick Keyboard shall be preconfigured with Avigilon Control Center Client

software commands.

The USB Professional Joystick Keyboard shall be USB powered.

The USB Professional Joystick Keyboard shall support left-hand and right-hand mode.

The USB Professional Joystick Keyboard shall meet or exceed the following design and performance

specifications.


Phone 615-754-2554 Fax 615-754-7225

Joystick Keyboard Specification

A. Operating System: Windows XP, 2000, Vista, Windows 7


A. Power Consumption: 350mA max B. Power Source: USB port


A. Dimensions: 379 mm x 89 mm x 224 mm; 15” x 3.5” x 8.8” B. Weight: 1.35 kg (3.0 lbs) C. Operating Temperature: 0°C to +45°C (32°F to 113°F)


A. EN55022 Class B B. EN50130-4 C. EN61000-6-3 D. EN60950-1 E. FCC part 15 Class B

Warranty

A. 12 months, parts and labor


A. ACC-USB-JOY-PRO USB Professional Joystick Keyboard


Phone 615-754-2554 Fax 615-754-7225

VIDEOIQ HD 2.0MP CAMERA

General Camera Description

A. The high definition cameras shall deliver:

1. Embedded analytics

2. 100% self-calibration

3. Embedded NVR storage up to 750GB

4. Embedded web server

5. Embedded VMS software

6. 90% bandwidth reduction

7. full 1080p resolution

8. 30 fps frame rate

General Information

A. High Definition Dome Camera Models

1. VIQ-HD-CRD225-3-8 — Day/night, 320 GB hard drive, 3-8mm lens

2. VIQ-HD-CRD250-3-8 — Day/night, 750 GB hard drive, 3-8mm lens

B. Dome Camera Mount Accessories Available:

1. Recessed

2. Surface

3. Pendant

4. Wall

5. Corner

6. Pole


A. Wide dynamic range 1080p CMOS image sensor

B. Mechanical Day/Night Filter

C. 1920 X 1080 pixels (1080p)

D. Dynamic Range: 70dB (typical)

E. Sensitivity 0.25 lux at F1.2

F. Signal to Noise greater than 50db

G. Auto iris and white balance control

H. Analog output: NTSC or PAL via BNC connector (for focusing only)

Storage Specifications


Phone 615-754-2554 Fax 615-754-7225

A. Embedded NVR Storage at 320GB or 750GB

B. Internal storage: 2 GB solid state memory in all models

C. All hard drives include patent pending hard drive lifespan extension technology: increases

life expectancy of hard drive to 10+ years

Video Specifications

A. H.264 compression, main profile

B. Frame Rate: Up to 30 frames per second in all resolutions

C. Dual Stream Encoding: Alarm events at high quality, resolution and frame rate.

Continuous recording at lower quality, resolution and frame rate. (Selectable)

D. Visual alarm indicators (colored boxes around objects detected) can be turned on or off

at the camera or display software

E. Programmable pre-alarm video recording

Networking and Communications Specifications

A. Ethernet 10/100 BaseT— RJ45 connector

B. Protocols: HTTP, HTTPS, TCP, RTSP, UDP, RTCP, DHCP, NTP, DNS

C. ZeroConf auto IP discovery of cameras

D. Security: Multiple user access levels with password protection, IP address filtering, and

HTTPS encryption

E. Web browser access to camera via built-in web server

Adaptive Megapixel Video Analytics Specifications

A. 100% self-calibrating analytics delivering the highest level of accuracy while reducing

installation time and maintenance

B. 100% self-tuning analytics to maintain and increase the highest levels of accuracy

C. Powerful VideoIQ adaptive analytic engine with rich library of behaviors

1. Fence-line and Perimeter Crossing Detection

2. Area Protection

3. Direction of Travel Alerts

4. Crowd Detection

5. Loitering and Dwell Time Alarms

6. Missing Object Detection

7. Cross Camera Object Search

D. Automatic alarm reporting with video verification clip

Alarm and Audio Inputs and Outputs Specifications


Phone 615-754-2554 Fax 615-754-7225

A. Two-way audio with talk down and recording capability

B. 3.5mm Audio I/O jack

C. Audio compression: G.711

D. Audio streaming live two-way: half duplex

E. Audio recording –alarm or continuous: full duplex

F. Two alarm inputs — TTL

G. Alarm output — Optical relay, 250mA max., programmable normally open or normally

closed

Diagnostics Specifications

A. Loss of communications trouble alert

B. Hard drive failure alert

C. Scene change trouble alert

D. Self-diagnostics built in

Power Specifications

A. Power over Ethernet (IEEE 802.3af) class 3

B. 12VDC: 10W max

C. 24VAC: 10W max

D. 7 watts typical

Environmental Specifications

A. Operating Temp: -20°C to 50°C (-4°F to 122°F)

B. Low Temp models: -30°C to 50°C (-22°F to 122°F)

C. Storage Temp: -30°C to 70°C (-22°F to 158°F)

D. Humidity: 20-80% RH (non-condensing)

E. Heater and blower built in

Video Management Systems Specifications

A. VideoIQ View™ Software System Requirements

1. CD-ROM with View software included with camera

2. Quad-core 2.0 GHz CPU or higher

3. 4 GB RAM or higher

4. Windows XP, Vista, or Windows 7

Mechanical Specifications


Phone 615-754-2554 Fax 615-754-7225

A. Camera Dimensions: 6.3” outer diameter x 8.19” tall (with surface mount kit)

B. (16.00 cm outer diameter x 20.8 cm tall)

Warranty

A. Manufacturer provides a 2 year warranty on parts and repair labor for the camera starting

at date of purchase.


Phone 615-754-2554 Fax 615-754-7225

PARK DETAILS Mt. Juliet Mundy Park

System Design:


Phone 615-754-2554 Fax 615-754-7225


Phone 615-754-2554 Fax 615-754-7225

Suggested Bill of Materials:


Phone 615-754-2554 Fax 615-754-7225

Mt. Juliet CDP

System Design


Phone 615-754-2554 Fax 615-754-7225


Phone 615-754-2554 Fax 615-754-7225

Mt. Juliet Public Works

System Design


Phone 615-754-2554 Fax 615-754-7225


REQUEST FOR PROPOSAL(S) FOR THE CITY OF …gov.findrfp.com/docs/19044_Park_Security_RFP.pdf ·...

Documents

Transcript of REQUEST FOR PROPOSAL(S) FOR THE CITY OF …gov.findrfp.com/docs/19044_Park_Security_RFP.pdf ·...