Contract For Renovation work at American Center PAS space ...
RENOVATION WORK (CIVIL,INTERIOR FURNISHING WORK OF …
Transcript of RENOVATION WORK (CIVIL,INTERIOR FURNISHING WORK OF …
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
DISMENTELLING AND DEMOLISHING
1 Dismantling(Internal & External Plaster)-
Carefully breaking and removing the existing
cement plaster complete in all respect from the
walls without disturbing the R.C.C. structure &
Brick massonery including cement mortar to
get a smooth wall including disposing the
debris up to 50m or to a place approved by
Engineer-in-charge. With required manpower,
Tools & plants, Scaffolding at required height. (
Note:- Working level upto 8.00m Height
from Plinth level.)
273.00 sqm 100.00 27300.00
2 Demolishing of R.C.C Chajja by manually/
mechanical means. All work with proper
scaffolding arrangement from out side &
disposing the debris up to 50m or to a place
approved by Engineer-in-charge.. Withall
required manpower, Tools & Tackles
11.02 RMT 350 3857.00
Dismentlling Brick Work & R.C.C. Lintel
3 Demolishing brick work manually or by
mechanical means including stacking of
serviceable material and disposal of
unserviceable material, carefully removing the
debris away outside the building and disposing
the same. Cost Include Removing of R.C.C.
lintel if any.
14.92 CUM 650.00 9700.46
RENOVATION WORK (CIVIL,INTERIOR FURNISHING WORK OF BRANCH, ATM &
WAITING AREA) AT SBI NEELBARD BRANCH BHOPAL
ESTIMATED COSTCIVIL WORKS
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
4 Dismantling(Wall Tiles)- Carefully breaking
and removing the existing tiles and mosiac
skirting etc. complete in all respect from the
walls without disturbing the R.C.C. structure &
Brick massonery including cement mortar to
get a smooth wall including carting away,
disposing the debris up to 50m or to a place
approved by Engineer-in-charge.. With
required manpower, Tools & Plants,
Scaffolding at required height. ( Note:-
Working level upto 3.00m Height from Plinth
level.)
4.37 SQM 100.00 436.50
5 Dismantling The Toilet floor and removal of
entire filling material including concealed pipes,
traps, Wash basin, W. C. seat, brick bat coba
etc complete and cleaning the surface to make
ready for water proofing treatment in all floors
level. disposing the debris up to 50m or to a
place approved by Engineer-in-charge.. With
required manpower, Tools & Plants etc
complete. Note:- Working level upto 8.00m
Height from Plinth level. (Depth of sunken
portion is 300mm to 400mm)
14.05 SQM 150.00 2106.96
6 Dismentalling and carefully removing
existing Windows/ Door/ Ventilators
shuttesr/Frames & leaving the grill intact in
place. All work with proper scaffolding
arrangement from out side & disposing th
debris up to 50m or to a place approved by
Engineer-in-charge.. With required manpower,
Tools & Tackles. (NOTE:- Door size
maximum 1.1m x 2.10m & Window Size
1.50X1.20)
12.00 NOS 115.00 1380.00
7 Dismantling & removing existing R.C.C. kitchen
platform of 24" to 26 " clear width and support
brick work 4" to 8" thick and disposing the
debris up to 50m or to a place approved by
Engineer-in-charge
1.02 SQM 150.00 153.00
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
13 Anit-Termite Treatment Diluting and injecting
chemical emulsion for POST
CONSTRUCTIONAL anti-termite treatment
(excluding the cost of chemical emulsion) :
a Treatment of soil under existing floors using
chemical emulsion @le litre per hole, 300 mm
apart including drilling 12 mm diameter holes
and plugging withcement mortar l :2 (I cement :
2 sand) to match the existing floor :
With Chlorpyriphos/ Lindane E.C. 20% with 1%
concentration. 189.90 SQM 509495.00
b Treatment at points of contact of wood work by
chemical emulsion Chlorpyriphos/ Lindane (in
oil or kerosene based solution) @ 0.5 litres per
hole by drilling 6 mm dia holes at downward
angle of 45 degree at 150 mm centre to centre
and sealing the same. 33.00 RMT 200
6600.00
c
Along the external wall below concrete or
masonry apron using chemical emulsion @.25
litres per linear metre including drilling and
plugging holes etc.
With Chlorpyriphos/ Lindane E.C. 20% with 1%
concentration. 139.55 RMT 50
6977.50
14 Providing and constructing brick masonry in
cement mortar 1:6 with best quality locally
available approved bricks in superstructure, at
all height & levels, including stricking joints,
scaffolding, curing, etc. complete as directed.
4.00 CUM 5000.00 20000.00
15 Providing and constructing half brick masonry
at all height & levels, places wherever required,
including under kitchen platform, shelves, etc.,
with best quality locally available bricks in 1:4
cement mortar with R.C.C. (Mix 1:2:4) partly
with 2 Nos. 6mm. M.S. bars at mid-height
(height between two patlied not exceeding
1.20m) including striking joints, scaffolding,
curing etc. complete as directed.
33.00 SQM 700.00 23100.00
WOOD WORK
16 FLUSH DOOR SHUTTERS
WORK IN SUPERSTRUCTURE
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
Providing and fixing solid core factory made
Flush Door Shutter 35mm thick(ISI marked
confirming to IS:2202) including providing 6mm
thick TW lapping all around on external edges.
Both faces of the shutter duly laminated with
1mm thick superior quality laminate. The rates
includes the necessary screw/fasteners and
the cost of polishing the 6mm thick TW
leaping.
a) Door For Double Panel(Cash Room & Main
Entrance area, Accounts)
i) 3 Nos. 125mm x 3mm SS Butt Hinges- Each
Panel
ii) 2 Nos. Anodized Alum. Tower Bolt-200mm
long
iii) 1 Nos. Anodized Alum. Aldrop 300mm long
iv) Door Stopper
v) Vision panel-Size:-300mm x 450mm Ht. (25mm
minimum thk. & width as required moulded
T.W. beading fixed glazed panels, 6mm thk.
Clear glass & glass flim(any pattern), working
as per Arch. Drawing. All work complete in all
respect. Note: Each panel
vi) 6-Lever Mortise Lock with White light handle
set.)Prod. Code:-8164, Baan Code:-
LKYLDM6LW, Make:- Godrej) or equivalent as
per sample approved
6.00 SQM 3000.00 18000.00
b Door For Single Panel
i) 3 Nos. 125mm x 3mm SS Butt Hinges
ii) 2 Nos. Anodized Alum. Tower Bolt-200mm
long
iii) 1 Nos. Anodized Alum. Aldrop 300mm long
iv) Door Stopper
v) Vision panel-Size:-450mm x 600mm Ht.
(25mmminimum thk. & width as required
moulded T.W. beading fixed glazed panels,
6mm thk. Clear glass & glass flim(any pattern),
working as per Arch. Drawing. All work
complete in all respect. Note: Each panel
vi) 6-Lever Mortise Lock with White light handle
set.)Prod. Code:-8164, Baan Code:-
LKYLDM6LW, Make:- Godrej) or equivalent as
per sample approved
3.78 SQM 3000.00 11340.00
17 WPC FLUSH DOOR FRAME
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
Providing & Fixing Factory made 100% solid
wood plastic composite (WPC) door frame
made from wood plastic composite (single
extruded process) material with density 780kg /
cbm. Make:- Rajshri plastiwood, pithampur
(m.p) an ISO 9001-20015 Certified company
Or Equivalent. As per specifications drawings
as directed by the engineer -in -charge door
should be water proof, termite proof, fire
restantant & having good screw holding
capacity . Note:- Before using this Item vendor
should be sample approved by
Architects/Bank or Engg. In-Charge. All work
complete in as per working drawings given by
Architects.
59.00 RMT 700.00 41300.00
a WPC door frame- single rebate 100mmx50mm
size
18 WPC FLUSH DOOR SHUTTER
Providing and fixing 28mm thick factory made
100% solid WPC Flush Door Shutter 28mm
thick, made from Co-Extruded WPC smooth
finish foam sheet as per door stander density
and manufactured by an ISO 9001-2015,
certified company and also approved brand in
state Govt. M.P. PWD and central government
CPWD for authentication. (ISI mark confirming
to IS:4020) as per sample approved. Including
Both faces of the shutter laminated with
0.25mm thick approved quality and wooden
shade laminate. The rate includes necessary
black enameled mild steel screw/fasteners,
powder coated M.S. Butt hinges,
polishing/painting of edges of shutter complete
with following hardware fittings per shutter:
Note:- Before using this Item vendor should
be sample approved by Architects/Bank or
Engg. In-Charge. Mode of measurement,
only front surface area of shutter. Make:-
Rajshri Plastiwood Pithampur (M.P). an ISO
9001-2015 certified company Or Equivalent.
9.00 SQM 4585.00 41265.00
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
19 INTERNAL PLASTERING
Providing and Applying smooth finish cement
plaster 15mm Avg.thick cement Plaster in
cement mortar 1:4 with fine sand in a single
coat on all internal wall, ceiling surfaces, apply
chicken mesh all joints RCC to Bricks in all
positions in line, level & plumb at all levels and
heights with necessary scaffolding, cleaning of
surfaces, raking out joints, roughening of
surfaces ,curing etc,including complete
material and labour.
189.00 SQM 300.00 56700.00
20 EXTERNAL PLASTER Providing and laying
plaster 20mm. (ave.) thick in cement mortar in
two coats, 12mm. 1st coat in C.M. 1:4 & final
coat in C.M. 1:3 in all positions as per the
specifications, with double scaffolding, curing,
finishing with sponge and cement including
raised bands, grooves, pattas, etc., completed
as per directed by Engg. In-Charge.
145.00 SQM 350.00 50750.00
21 Wall Putty
Preparing wall surface by rubbing with sand
paper/ wire brush, removing all dirt, smoke,
grease, loose plaster, Vegitation etc. complete
and applying two or more coats of approved
cement primer and Birla white putty to all
internal walls duly rubbed with sandpaper to
ensure smooth finished plain surface ready for
applying plastic emulsion paint. The rate to
include necessary scaffolding etc. complete as
directed by the Architect or Engineer-in-charge.
377.58 SQM 80 30206.13
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
22 WEATHER COAT EXTERIOR EMULSION
PAINT(APEX ULTIMA)
Providing and applying two coats and final coat
of weather proof exterior emulsion paint (Asian
/ Berger or equivalent) 7 years warranty of
premium quality of approved make &
manufacturer of required shade after
thoroughly brushing the surface free from
mortar dropping and other foreign matter,
including two coats of primer and two coats of
putty(BIRLA WHITE, ASIAN or equivalent) and
also including preparing the surface even and
sand papered smooth etc. all materials and
labour complete. Note:- Safety parameter
follow as per IS code.
180.30 SQM 130.00 23439.04
23 INTERIOR ACRYLIC EMULSION PAINT
Providing and applying on wall & ceiling two
coats or final interior emulsion paint (Asian /
Berger or equivalent) of premium quality of
approved make & manufacturer of required
shade after thoroughly brushing the surface
free from mortar dropping and other foreign
matter, including two coats of primer and two or
more coats of putty(JK or Birla) and also
including preparing the surface even and sand
papered smooth etc. all materials and labour
complete.
377.58 SQM 110.00 41533.43
24 Synthetic Enamel Paint
Cleaning the surface thoroughly and removing
the external elements, if any , such as dust,
dirt, grease etc. providing and applying Two
coats of Red-oxide primer, rubbing upto
finished level and three coats of Ist grade
synthetic enamel paint of approved
manufacturer specification in approved colour
and brand. All complete including scaffolding ,
cleaning the site etc. (Applied area M.S. Grill.)
Makes:- Asian, Nerolac Berger or equivalent.
7.00 SQM 110.00 770.00
25 VITRIFIED FLOOR TILES
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
Providing and laying Vitrified floor tiles
Multi/Double Charged (Minimum top layer
thickness 2.0mm) Nano Polished self design,
in different sizes with water absorption less
than 0.05% and conforming to IS : 15622 of
approved make in all colours & shades, 1st
quality/ premium in flooring , laid on 20mmto
25mm thick cement mortar 1:4 (1 cement : 4
sand) OR over Already laid Cement Floor with
the Standard Quality Adhesive
KARAKOLL/BAL ANDURA or equivalent
Surface laying of tiles with white cement and
jointing compound of standard make favimate,
bal adhesives or equivalent to match the colour
of tiles & proper line with levels. The tiles shall
be laid as per the pattern specified by the
architect. The cost shall include cost of tiles
cost of under floor cement mortar 1:4 - bedding
cement slurry( mortar thickness as per
required), white cement, joint filler compound
all other material, labour, wastages, all lead
and lifts make favimate, bal adhesives or
equivalent to match the colour of tiles. etc.
complete in all respect. Note:- Sample
approved by Architects or Site In-charge.
Makes:- RAK, Simpolo,
Kajaria, Nitco, Qutone, Johnson or
equivalent. (BASIC RATE OF TILE 690/- PER
SQM.) SIZE:- 600MM X 600MM
238.22 SQM 1150.00 273956.45
26 CERAMIC WALL TILES
Providing and fixing Ceramic Glazed Wall Tiles
sizes of tiles are 300x450 mm or more (having
thickness 9 to 10 mm) of 1st quality conforming
to IS : 15622 of approved make in all Colours
shades, laid on 12mm thick bed of Cement
Mortar 1:3 (1 Cement : 3 sand) jointed with
grey cement slurry @3.3 kg per sqm including
pointing the joints with white cement and
matching pigments etc., complete. NOTE:-
Sample approved by Architects/BANK or Site
In-charge. Makes:- Kajaria, Simpolo, Nitco,
Somani OR equivalent. (BASIC RATE OF TILE
290/- PER SQM.)
59.00 SQM 1000.00 59000.00
27 ANTI-SKID FLOOR TILES
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
Providing and laying Antiskid endura floor tiles
for Toilets and Wash Area, size of tiles are
300mm x 300mm, 12 mm thickness with water
absorption's less than 0.08% and conforming
to IS: 15622 of approved make in all colours
and shades, laid on 20mm thick cement mortar
1:4 (I cement :4 sand) including grouting the
joints with white cement with matching
pigments etc., complete.. Make Kajaria,
Simpolo, Nitco, Somani OR equivalent etc as
approved. The work should be carried out in
Toilet floors with adequate slope including
cutting holes for Nahani Trap grating etc.
complete.(Sizes are 300mmx300mm). NOTE:-
Sample approved by Architects/Bank or Site In-
charge. (BASIC RATE OF TILE 450/- PER
SQM.)
15.00 SQM 1000.00 15000.00
30 ALUMINIUM SLIDING WINDOWS
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
a) Providing and fixing :- 3-Track Aluminum
sliding windows comprising sliding
panels(2- Track of Glass panels & 1-Track
of SS wire mesh mosquito Net), with
extruded built up standard tubular sections/
appropriate Z sections and other all members
are in 14 gauge sections of approved make
conforming to IS: 733 and IS : 1285, fixed with
rawl plugs and screws or with fixing clips, or
with expansion hold fasteners including 5mm
thk. clear Plain Glass approved make,
necessary filling up of gaps at junctions, at top,
bottom and sides with required PVC/neoprene
felt etc. Aluminum sections shall be smooth,
rust free, straight, mitred and jointed
mechanically wherever required including cleat
angle, Aluminum snap beading for glazing /
paneling,C.P. brass / stainless steel screws, all
complete as per architectural drawings and the
directions of Engineer-in-charge. Powder
coated aluminum (minimum thickness of
powder coating 50 micron. of approved shade.
NOTE:- SECTION OF SAMPLE SHOULD BE
SUBMIT IN ARCHITECT OFFICE AND
APPROVED BY ARCHITECT. ALL
FABRICATION
WORK AS PER GFC DRAWINGS 7.00 SQM 3500.00 24500.00
b) ALUMINIUM LOUVRED VENTILATOR-
Providing and fixing colour anodized,
aluminum ventilator with extruded built up
section as per above specification of wall
thickness not less than 14 gauge and approve
make glazed with 4 mm thick opaque glass
louver 100mm wide .
1.08 SQM 2800.00 3024.00
M.S. GRILL DOOR WITH FRAME
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
31 Providing and Fixing M.S. Grill Door including
door frame complete as per detailed
Architectural drawing including cutting,
bending, fabrication, grinding, drilling, providing
holdfasts etc. and painting the door with 3 or
more coats of approved quality and shade
enamel paint over a coat of Zinc Oxide primer
in desired finish complete. The Rotation of Grill
Door shall be 180 Degree with Heavy duty
Pivot action Hinges on Top & Bottom, 2 Nos.
heavy duty Aldrops (provided on Both sides),
fixing approved quality Godrej make Center
Lock (excluding cost of lock) as per approval of
Architect/Bank.
2.52 sqm 8000.00 20160.00
32 Providing and fixing Granite of 18mm thick
gang saw cut mirror polished (premoulded and
prepolished) machine cut for kitchen platforms,
vanity counters, window sills , door sills facias
and similar locations of required size of
approved shade, colour and texture laid over
20mm thick base cement mortar 1:4 (1 cement
: 4 sand) with joints treated with white cement,
mixed with matching pigment, epoxy touch ups,
including rubbing, curing moulding and
polishing to edge to give high gloss finish
wherever required etc. complete at all levels.
samples approved by Engineer-in-charge.
Granite of approved colour and shade bath
room and w.c. Door sill
0.90 SQM 3500.00 3150.00
33 Providing and fixing Wall Hung WASH BASIN
including Pillar cock with Aerator, Angle valve
with flange, Full Thread waste coupling, Bottle
Trap heavy duty with vertical pipes &
connections, Connecting Hose 2.0 ft. long,
Brackets, all fitting parryware or equivalent,
proper fixing line & level, testing etc.works as
per directed by Engg. In-Charge. SIZE ARE
(MM) 200X550X400 OR SIZE EQUIVALENT,
MAKE:- JAQUAR-CNS-WHT-WB-04 OR
EQUIVALENT.
Providing and Fixing Pillar Cock with Aerator
for wash basin
Providing and Fixing Full Thread Waste
Coupling
Providing and fixing Bottle Trap
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
Providing and fixing Connectiing Hose pipe 2.0
ft. Long
Providing and fixing M.S. Brackets ( Pair )
including hole for bracket fixing and proper
fixed with cement concrete and finishing etc.
3.00 EACH 4000.00 12000.00
34 Providing and fixing stone slab table rubbed on
both faces edges rounded and polished of size
as required and 1.8 cm thick fixed in urinal
partitions by cutting a chase of appropriate
width with chase cutter and embedding the
stone in the chase with epoxy grout or with
cement concrete 1:2:4 (1 cement : 2 sand :4
graded stone aggregate 6 mm nominal size) as
per direction of Engineer-in-charge and
finished smooth.
Granite Stone of approved shade. 1.80 SQM 3500.00 6300.00
35 Providing and fixing white vitreous china flat
back half stall urinal of size 580x380x350 mm
with white PVC automatic flushing cistern, with
fittings, standard size C.P. brass flush pipe,
spreaders with unions and clamps (all in C.P.
brass) with waste fitting as per IS : 2556, C.I.
trap with outlet grating and other couplings in
C.P. brass including painting of fittings and
cutting and making good the walls and floors
wherever required:
Range of two half stall urinals with 5 litre P.V.C.
automatic flushing cistern.
2.00 EACH 8700.00 17400.00
36 Providing and fixing white vitreous china water
closet squatting pan (Indian Type W.C. pans)
size 580mm with 100mm sand C.I. 'P' or S'
trap,low level, flushing cistern
(HINDWARE,JAQUAR or equivalent) with
fitting 32mm diameter galvanized, stainless
steel flush pipe with fittings and clamps,20 mm
GI with spacers etc complete. including cutting
and making good the walls and floors. Where
ver required Orissa Pattern W.C. pan 58x44
cms of any colour(Cat. No. 20004 HindWare
)or equivalent as approved. Note One number
of Bib Cock in Each, position as per drawing.
SIZE ARE (MM) 260X445X580 OR SIZE
1.00 EACH 4000.00 4000.00
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
37 Providing and fixing white vitreous china type
water closet pedestal (wall or Floor mounted
European Type W.C pans extended wall
mounting HINDWARE, JAQUAR or
equivalent) with low level cistern of any colour
with matching superior quality seat Cover
overcutting and making good the walls and
floors. Wherever required Wall Mounted E.
W.C. pan with white plastic seat cover and lid
Complete with cost of Angle Valves, Health
Faucet and one Bib Cock with necessary
water supply arrangement comprising of UPVC
pipes of suitable dia,including cost of
C.I.Chair/Brackets.( Hindware
CONSTELLATION Cat. No. 20040) or
Equivalent
2.00 EACH 5500.00 11000.00
38 Providing and fixing CP Brass Health Faucet /
Hand shower with flexible water connection
1.0 mtrs. Long easy flex tube in chrome finish
and wall hook in the toilet.
3.00 EACH 1200.00 3600.00
39 P/F 100 mm dia heavy quality approved make
PVC Nahani trap with 75 mm dia outlet ,
embedding the trap in cement concrete using
1: 3 : 6 mix with 20 mm metal complete
including joining effluent pipe etc, and fixing
125 mm dia CP brass grating etc. complete.
5.00 EACH 350.00 1750.00
a stainless steel jali (grating)
Providing and fixing stainless steel jali (grating)
with or without hole for waste pipe for floor/
Nahani trap inner lining in SS
5.00 Each 65.00 325.00
40 Providing and fixing heavy duty 15 mm dia CP
brass short body stop cock of Jaguar make
(Clarion Series) CON-037KN OR Equivalent
with wall flange all complete. Sample approved
by Architects or Site In-charge
4.00 EACH 1000.00 4000.00
41 Providing and fixing heavy duty 15 mm dia CP
brass Pillar cock of Jaguar make(Clarion
Series) CON-021KN, Florentine Pillarcock with
Aerator or Equivalent with wall flange all
complete. Sample approved by Architects or
Site In-charge
3.00 EACH 1100.00 3300.00
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
42 Providing and fixing heavy duty 15 mm dia CP
Two way bib cock of Jaguar make(Clarion
Series) CON-041KN OR Equivalent with wall
flange all complete. Sample approved by
Architects or Site In-charge
3.00 EACH 1200.00 3600.00
43 Providing and fixing in position best Indian C.
P. Brass made (0.3 micron Chrom and 10
micron Nickel plated) Soap Dish Holder .
Sample approved by Architects or Site In-
charge
3.00 EACH 600.00 1800.00
44 Providing and fixing Towel rail (C.P.)brass15
mm dia x 600 mm long having approx. wt.500
gm, including ss make screw or fasteners
proper line and level as per directed by Engg.
In-charge . Sample approved by Architects
or Site In-charge
3.00 EACH 1100.00 3300.00
45 Supplying and fixing approved quality of rigid
SWR(TYPE-B) PVC pipes(All Vertical Pipes on
Wall SURFACES used PUSHFIT AND
HORIZONTAL SURFACE USE SOLFIT PIPE
AND FITTINGS) of Ashirvad make or
equivalent , jointing the pipe and including
required Fittings(Bend, Elbow, Y-shape with
Door, Coller, Socket, etc.) with suitable solvent
as per manufacturers specifications, laying the
pipes under floor , ceiling or on the walls as per
the required gradient including providing
necessary support, clamps, scaffolding etc.
conveying the materials to all floors making
holes in masonry or concrete cutting the pipe to
required length, testing to a head of 1.8 m for
horizontal pipes and for vertical pipes by filling
with water etc. complete including necessary
scaffolding at all levels as required. Note:-
Including Existing Pipe removing and
placing as per directed by Engg. In-Charge.
(b) 63 mm Dia. 10.00 RMT 280.00 2800.00
(b) 75 mm Dia. 10.00 RMT 340.00 3400.00
(d)110 mm Dia. 10.00 RMT 680.00 6800.00
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
46 Providing and fixing Stainless steel Kitchen
sink-AISI-304 Grade (Nirali make:- Eureka
Deluxe Small) Over all size are
625mmx445mm(24.5" x 17.5") Bowl size are
21"x14:x8" on the kitchen platform including
platform stone cutting, molding and finishing as
per architects etc. complete with cleaning and
finished as per directed by Engg. In-Charge..
Make:- Nirali Sink or Equivalent and Sample
approved by Architects or Site In-charge
1.00 EACH 5000.00 5000.00
47 Providing and Fixing Coupling for SS Sink
(Including Flo-well, Strainer) . Including
required accessories and man power etc.
Make:- Nirali or Equivalent and sample
approved by Architects.
1.00 EACH 800.00 800.00
48 Providing and fixing in position Chlorinated
Polyvinyl Chloride(CPVC) SDR-11 pipes and
fittings having thermal stability for hot and cold
water supply including all CPVC plain and
Brass threaded fittings i/c fixing the pipes with
clamps at 1.00 M spacing . This rate includes
jointing of pipes with one step CPVC solvent
cement, cost of cutting chases in wall/floor etc.
and making good the surface for Concealed
piping work etc.complete. Make:-
a 15 mm dia. nominal bore 5.00 RMT 1320.00 6600.00
b 20 mm dia. nominal bore 30.00 RMT 1950.00 58500.00
c 25 mm dia. nominal bore 12.00 RMT 4240.00 50880.00
49 Providing and fixing CPVC Schedule80 BALL
VALVE approved quality, including necessary
fitting and required for connections. NOTE:-
BRASS THREADED (TWO SIDE)
b) For 25mm NB 1.00 EACH 1100.00 1100.00
50 Providing and laying average 65mm thick CC
1:2:4 for base concrete for Toilets in proper
slope. All works as per directed by Engg. In-
Charge.
15.00 SQM 300.00 4500.00
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
51 Providing and fixing Swan Neck Kitchen Sink
Bib Cock Tap with Left Hand Operating Knob
make of Jaguar /Parryware or equivalent
approved make with swinging casted spout
(wall mounted model) with connecting legs &
wall flanges etc. complete. Sample approved
by Architects or Site In-charge
1.00 EACH 1200.00 1200.00
52 Providing and fixing bevelled edge mirror of
superior glass approved quality complete with
6mm thick asbestos sheet ground fixed to
wooden cleats with C.P. brass screws and
washers. The cost including the wooden frame
25mm wide Teak Wood Frame all around the
Glass Or stud fitting as per instruction of Engg.
In-Charge.
1.35 sqm 2500.00 3375.00
53 Providing and fixing 19mm BWP Ply shutters
with 25mm thk. made of frame below kitchen
platform including approved quality and shade
glazed 1.0 mm lamination to our face and
.80mm white/Ivory lamination to all internal
surfaces including TW moulding on edges of
shutters, hardware like hinges, handles
magnetic catch etc. complete. Rate to include
providing drawers wherever required as per
drawing fixed on telescopic channels of EBCO.
Note:- Panels Hinges Hafele Double Ball
Bearing, Adhesive material used as
Approved company. And Laminate shade
approved by Architects.
1.35 SQM 2800.00 3780.00
INTERIOR AND FURNISHING WORK
55 FULL HEIGHT PANELLING OVER
COLUMNS / WALL
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
Providing & Fixing panelling on existing walls /
Columns with under framing of 40 mm x 65
mm second class T.W. Frame/ Aluminium
Frame placed @ 600 mm c/c bothways &
coverd with 8mm thick commercial ply screwed
over the soft wood frame( treated for termite
painted with fire retardant paint).All finished
faces shall be provided with laminate (1.0 mm
thick) of approved shade & quality. The
panelling shall have provision for power
cabling at sill level (75 cm from FFL) and
communication cabling at skirting level, by
providing T.W. removable section 19mmx150
mm as per architects detailed drawings. The
rates shall include all necessary hardware,
material, lobour westage etc. complete.
200.00 SQM 1900 380000.00
56 PARTIALLY GLAZED FULL HT. PARTITION
(PARTITION THICKNESS 70MM APPROX.)
Providing & fixing wooden partitions (double
skin) full height @ 600mm c/c bothways
alluminium frame 50mm x40mm or
50mmx50mmx1.2mm. 8 mm thick MR
PLYWOOD fixed on both faces, with laminate
1.0 mm thick on all exposed faces. The panels
shall be equally divided and shall have
provision of openable door 900 mmwide with
butt hinges etc. complete. The glass panels 6
mm thick shall be fixed with mouldings/ leaping
and film as per design. The under frame shall
be properly anchored with the beam bottom/
ceiling fitting with anchor fastners for a strong
and sturdy partition. The surface shall be
painted or fixed with laminate as per architects
drawings. The rates shall include all material,
hardware, wastages, labour, cost of polishing &
painting etc complete. Mode of measurment is
only one side surface area not including above
false ceiling. (Working as per detailed
drawing.)
39.10 SQM 3000 117303.00
57 PARTITIONS UPTO 1350 M HEIGHT
(PARTITION THICKNESS 70MM APPROX.)
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
Providing and Fixing in Single window counters
and open office (double skin) Low height
partion with @ 450mmX450mm c/c both ways
50mmx50mmx1.2mm under frame of
Aluminium section with 8mm thick MR Ply fixed
with laminate 1.0 mm thick on all exposed
faces with panels solid up to 900 mm Height
from floor level of approved shade & quality
with top portion of partition have 12mm thick
glass of 450 mm height with etching and soft
board panels as per architects drawing on top
with cut edges rounded & frosting as per
design, horizontal Teak wood frame on top of
glass with itching & 40x20mm first class TW
wooden moulding shall be provided as per
design. Necessary slots to be made for cable
management in co-ordination with electrical
contractor. complete as per drawing and
direction of Bank engineer & Architect.
(Working as per detailed drawing) NOTE:-
LAMINATE SHADE APPROVED BY
ARCHITECTS.
12.15 SQM 3000 36450.00
58 DOORS & SHUTTERS (GLAZED)
a GLASS DOOR- 12MM THICK TOUGHENED
GLASS
Providing and fixing Main door using 12mm
clear float toughened Glass (entire elevation
area of the main door shall look glass with
patch fittings only, no wooden or plywood
sections/panels). The cost to include all
hardware required viz., Dorma or approved
equivalent make floor springs, patch fittings etc
. 3M privacy film to be pasted as per design
and directions. The rate is for a finished item of
work etc., complete as directed.Height shall be
measured up to false ceiling or actual glass
height.. Supporting work to be/ extended up to
rcc slab level shall not be paid for
separately.
7.56 SQM 3500 26460.00
b Accesseris for toughened glass i.e floor
springs, patch fittings etc its accessories, top
pivot, center lock, 900mm glass door handle
etc.for per set of door
3.00 nos 10000 30000.00
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
59 VERTICAL BLINDS FOR WINDOWS
Providing and fixing Vertical Blinds
manufactured by VISTA/HUNTER DOUGLAS
or equivalent to the following specifications:
The head channel shall measure 30mm wide
and 27.6mm deep with a nominal wall
thickness of 1.2mm to 1.4mm extruded from
patented 6063-T5 alloy finished in clear
anodisation to a thickness of 20 microns.
The SPLINE SHAFT shall be a tri-lobular
patented aluminium extrusion of 5053-T5
alloy.
The SLAT TRAVELLE assembly shall be
mouldeding a imported high engineering grade
plastic & shall incorporate a gear clutchd
esigned to prevent damage to the assembly
Slat hooks shall be removable to allow
replacement wher er equired without
dismantling the tracking system.
The SLAT SPACER LINK shall be moulded
from imported high engineering grade plastic
and shall couple the slat travelers together in a
predetermined spaced relationship and to allow
equal overiap( minimum1 2mm) between slats
a cross the width of the shade.
The TILT CONTROL shall be by means of
imported braided nylon cord with 3.25mm
diameter engineering grade plastic balls
moulded co-axially to it on 4.4mm c-t-c
distance by pulling on the ball chain connected
to a pulley.
The SLAT CARRIER shall be of moulded nylon
and shall be suitable for snap insertion in to the
hook of the traveler assembly.
The BOTTOM LINKAGE CHAIN shall couple
adjacent slat the base to minimize differential
movement of slats.
The CHANNEL MOUNTING BRACKET shall
be press formed angle brackets and provided
with holes for fixing screws & nuts attachments
of the channel mounting clips. Finish shall be
clear passivated Zinc plate.
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
The Fabric slats shall be slit in 100mm width
and provided with bottom pockets for housing
bottom weights which are coupled together by
means of endless bead chain pivotally attached
by clasps to each side of each weight. The
clasp shall be self release from the bottom
weight when the chain is subjected to accident
load. Salt overlaps shall never be less than
12mm minimum.
The bottom weight shall be moulded from high
quality plastic and shall weight not less than
32gms. Each, to ensure constant tensioned
straighness of the fabric slats.
12.00 SQM 1300 15600.00
60 ROLLER BLINDS FOR WINDOWS
Providing and fixing of Roller Blinds from
Hunter Douglas/Vista or equivalent. It shall be
driven by a ball chain pully with ball chain and
can be positioned at right side or left hand side
of the shade. The shade when lowering or
raising, shall be automatically locked in position
in position pon release of the ball chain by
means of a built in friction lock. The end Plug
shall be molded of plastic with a steel location
pin. The plug shall be inserted into the tube
end. The support Brackets shall be coated
steel & provided with covers and used in right
hand of left hand position. The roller tube shall
be of extruded aluminium with 38mm internal
diameter and skin thickness of 1mm and shall
incorporate a keyway integral with the tube to
accommodate the spine. The outside diameter
of the roller tube shall be 40mm. The bottom
rail shall be a stiffening element inserted into a
bottom rod pocket. The material may be timber,
PVC covered steel tube or VB bottm rail. The
BALLCHAIN shall be 2mm dia. cord with
4.5mm dia. acetal balls molded co-axially to it
on 6mm pitch to form an endless ballchain. It
ias used for raising or lowering action of the
shades. The fabric will be 100% PVC free with
no volatile organic compounds
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
recommended for clean room condition,
having no bacterial / fungal emission and
satisfying NFPA fire safety standard, shall be
as per selection from the hunter Douglas/ Vista
or equivalent range and shall be sized
according to site requirement(subject to maxi.
width limiation of individual fabric types). A
bottom pocket shall be created in the fabric to
incorpoarate the bottom rail.
9.00 SQM 1500 13500.00
61 Providing and fixing 12 mm thick soft boards on
6mm ply backing covered with approved cloth
at desired location
6.00 SQM 600 3600.00
62 WRITING TABLES AROUND COLUMNS
Providing and fixing Wooden Top Writing
Counters 450 mm wide around the Cloumns
duly panelled . It shall be made out of 19mm
MR Ply wood duly finished with superior quality
laminate of approved shade and make . It shall
have Two Shelves Top shelve at 1.05 Metres
height from the floor level with 12 mm bevelled
glass top . The lower shelve to be at 90 cms
height from the floor level for keeping blank
forms etc. Vertical menbers sloping inwards to
act as brackets shall be made out of 19mm
Board laminated on both faces and 19X5 mm
TW leaping duly polished shall be seen . The
rates includes Cost of all material, Labour ,cost
of glass top , cost of labour , wastages ,
polishing with superior quality Mellamine polish
etc. complete. (Working as per detailed
drawing).
0.72 SQM 10000 7200.00
63 FALSE CEILING IN COMBINATION OF
GYPSUM BOARD CEILIN OF 80% AND 20%
G ARMSTRONG GRID CEILING
False ceiling shall be done in combination of
Armstrong grid ceiling and gypsum to an extent
of 80% and 20% respectively.As per Drawing
or As directed by Architect or Bank Engineer-in-
charge
GYPSUM BOARD FALSE CEILING
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
A Providing and fixing Gypsum Board suspended
false ceiling, which includes providing and
fixing G.I. Perimeter channels of size 0.55mm
thick having 1 flange of 20mm another flange
of 30mm & a web of 27mm along with
perimeter of ceiling, screw fixed to brick wall /
partition with the help of nylon sleeves and
screws, at 610mm centres. Then suspending
G.I. intermediate channels of size 45mm,
0.3mm thick with two flanges of 15mm each
from the soffit at 1220mm centres with steel
expansion fasteners. Ceiling section of
0.55mm thickness having knurled web of
51.5mm and two flange of 26mm each with lips
of 10.5mm are then fixed to the intermediate
channel only gypsteel frame work to be used at
457mm center 12.5mm tapered edge
Gypboard screw fixing is done mechanically
either with screw driver or drilling machine. All
jointed and finished so as to have a flush look
which includes filling and finishing the tapered
and square edges of the board with jointing
compound, paper tape and two coats of
primer.Provision for light fittings, grills and
other fixtures to be made as per standard
arrangements. Painting of the ceiling of
approved shade and quality as desired.
152.00 SQM 800 121600.00
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
b Providing and fixing in the true horizontal level
false ceiling system of Armstrong world
industries. The suspension system shall be the
Armstrong Trulock Silhouette revealed profile
grid system with 15mm wide flanges
incorporating a 3mm or 6mm central recess
color black or white revealed Silhouette main
runners and cross tees to have mitered ends
with birds mouth notches to provide mitered
cruciform junctions. Main runners to be spaced
at 12mm c/c fixed by using 2mm pre
straightened GI Wire.Main tee,rotary stitched of
size 15mm x44mmx3600mm at every 1200mm
c/c maximum and 1200mm cross tee of size
15mmx44mm x1200mm at every 600 mm c/c
maximum and 600mm c/c cross tee of size
15mmx44mmx600mm at every 1200mm c/c
maximum and 19mmx 19mmx3000 wall angle
allround the wall to form grid size of
600mmx600mm and suspending the grid using
2mm prestraightened GI Wire and 6mm nylon
raw plug at every 1200mm intervals at the main
tee and laying of dunne premier micro look
mineral fiber tiles manufactured by Armstrong
world industries of size 600mm
x600mmx15mm over the formed grid complete
as directed.
Note: the work includes cost and conveyance
of materials and labour charges includings .All
Operational charges tools lifts and all heights
etc surfaces of the false ceiling should be with
drop ceiling. Manufactures specifications to be
strictly followed. No extra shall be payable for
making cutouts and providing frame for cutouts
of for making staggred ceiling.
38.00 SQM 1100.00 41800.00
64 MAKING NEW SINGLE WINDOW
COUNTERS (TABLE TOP & SIDE)
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
Providing & fixing single windows counter
made as per architects detailed drawings
consisting of panelled base upto table top
height, fixed over it and laminated (1.0mm
thick) on Front exposed faces including drawer
exposed faces. It shall have provision for
structure cabling & power wiring as in other low
height partitions. the top shall be 25mm thick
MR PLY, 12mm thick Corian Marble apply
(paid seperatly) with required buffing finishing
as per architect guide, having EBCO sliding
key board trey.T.W. edging all-round the
counter to be provided as per monitor to be
made(Counter Top width 750mm approx.).
Include three drawers of 375mm wide made up
of 6mm to 12mm MR Plywood of approved
brand on Right / Left hand side of the table on
telescopic sider with partition for keeping Cash
box with compartments to store currency of
different denominations and having proper
handles, locking arrangement in drawers
Godrej/Hettich/Ebco or equivalent to be
provided. Inside the Drawer 0.8mm thk white
colour laminate proper finishing as per directed
by architects. The cost includes the cost of all
material, Labour, Wastages, Polishing and
painting inside surfaces with 0.8mm thick
laminate(Colour in White shade) , finishing etc.
Complete. (Working as per given GFC
Drawing)
6.40 RMT 15000 96000.00
TABLES
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
65 CM Table (SIZE 2100X900X750MM)
Supply and installing New Table of overall size
2100mm x 900mm x 750mm. Including cost of
made of 19mm thk. MR Plywood of approve
brand all around and finished with laminate of
1.0mm thick of approve color, brand and
shade. The cost to include three drawers of
375mm wide made up of 6mm to 12mm MR
Plywood of approved brand on Right / Left
hand side of the table on telescopic sider with
partition for keeping of notes of different
denominations, a keyboard tray 250mm wide,
CPU stand, Foot rest as designe and directed
by Engg. In-Charge. All exposed edges to
have teak wood bidding/lipping stained to
match the desk and melamine finished. All
inner surface to be finished with 0.8mm thk.
laminate in white color with approved brand.
The works to include all hardwares such as
castors, Brass Hinges, Bottom PVC Shoe,
Cable Manager, Ball Catchers, Fully
extendable grawer slides, Auto Locks, Handles
etc. of Godrej or approved make. Locks to be
of single control type. Design and detail of the
counter shall be as per Bank's new uniform
colour, layout and elevation policy. All works
completed as per Engg. In-charge or given
drawing. Make of
1.00 EACH 20000 20000.00
MR Plywood:- Century / Green / Archidply or
Equivalent. and Laminate :- Greenlam /
Centurylam / Archidlam or Equivalent.
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
66 OFFICER'S TABLE (SIZE 1500X750X750MM)
Supply and installing New Table of overall size
1500mm x 750mm x 750mm. Including cost of
made of 19mm thk. MR Plywood of approve
brand all around and finished with laminate of
1.0mm thick of approve color, brand and
shade. The cost to be include a keyboard tray
250mm wide, CPU stand, Foot rest as design
and directed by Engg. In-Charge. All exposed
edges to have teak wood bidding/lipping
stained to match the desk and melamine
finished. All inner surface to be finished with
0.8mm thk. laminate in white color with
approved brand. The works to include all
hardwares such as castors, Brass Hinges, Ball
Catchers, Bottom PVC Shoe, Cable Manager,
Auto Locks, Handles etc. of Godrej or
approved make. Locks to be of single control
type. Design and detail of the counter shall be
as per Bank's new uniform colour, layout and
elevation policy. All works completed as per
Engg. In-charge or given drawing. Make of MR
Plywood:- Century / Green / Archidply or
Equivalent. and Laminate :- Greenlam /
Centurylam / Archidlam or Equivalent.
5.00 EACH 18000 90000.00
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
67 CONFRENCE TABLE (SIZE
2100X900X750MM)
Supply and installing New Table of overall size
1500mm x 750mm x 750mm. Including cost of
made of 19mm thk. MR Plywood of approve
brand all around and finished with laminate of
1.0mm thick of approve color, brand and
shade. All exposed edges to have teak wood
bidding/lipping stained to match the desk and
melamine finished. All inner surface to be
finished with 0.8mm thk. laminate in white color
with approved brand. The works to include all
hardwares such as castors, Brass Hinges, Ball
Catchers, Bottom PVC Shoe, Cable Manager,
etc. of Godrej or approved make. Design and
detail of the counter shall be as per Bank's new
uniform colour, layout and elevation policy. All
works completed as per Engg. In-charge or
given drawing. Make of MR Plywood:- Century
/ Green / Archidply or Equivalent. and Laminate
:- Greenlam / Centurylam / Archidlam or
Equivalent.
1.00 EACH 20000 20000.00
68 LOW HT. STORAGE UNIT
Providing and fixing Low ht. Storage units of
size 450mm(DEPTH) x 450mm(HT.), made up
of 19mm MR Plywood of approved brand on
top, Bottom & vertical support and finished with
1.0mm thick laminate of approved brand with
shade on side and top. The storage units shall
have openable / sliding shutters made up of
19mm thick MR Plywood and finished in
1.0mm thick laminate of approved brand with
shade. The storage units shall have
intermediate vertical shelves made in 12mm
thick MR Ply. All exposed edges to have teak
wood lipping of required size, stained to match
the desk and melamine finished. All inner
surface to be finished with 0.8mm thick
laminate in white colour as per approved
brand. The works to include all hardwares such
as : castors, brass hinges, ball catchers, locks,
handles etc. of Godrej or approved Make of
MR Plywood:- Century / Green / Archidply or
Equivalent. and Laminate :- Greenlam /
Centurylam / Archidlam or Equivalent.
7.58 SQM 6000 45495.00
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
69 SIDE CREDENZA 450MM(D)X750MM(H)
Supply and installing of Side Credenza
(450mmx750mm) made of 19mm thk. MR
Plywood of approve brand all around and
finished with laminate of 1.0mm thick of
approve color, brand and shade. The side
credenza unit should have openable/sliding
shutter cupboard and intermediate horizontal
shelves made in 12mm thick MR Plywood. All
exposed edges to have teak wood
bidding/lipping stained to match the desk and
melamine finished. All inner surface to be
finished with 0.8mm thk. laminate in white color
with approved brand. The works to include all
hardwares such as castors, Brass Hinges,
Bottom PVC Shoe, Cable Manager, Ball
Catchers, Fully extendable grawer slides, Auto
Locks, Handles etc. of Godrej or approved
make. Locks to be of single control type.
Design and detail of the counter shall be as per
Bank's new uniform colour, layout and
elevation policy. All works completed as per
Engg. In-charge or given drawing. Make of MR
Plywood:- Century / Green / Archidply or
Equivalent. and Laminate :- Greenlam /
Centurylam / Archidlam or Equivalent.
2.25 sqm 6000 13500.00
70 SOFA FOR VISITORS
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
Providing & Setting on site sofa set as per
design. detail set consisting of fully upholstered
round boister types back and consisting of fully
upholstered round boister types back and seat
in 125 mm (100 mm rubber +25 mm foam)
cushion with coil springs and block
board/hardwood frame of approved quality size
& colour, upholstered in approved quality of
textured upholstery material, armrest forming
supports for the rest and back in angular shape
made out of boxing 18-20mm ply board of
approved make. The bottom opening shall be
fixed with galvanised mesh to avoid rates etc.
T.W. legs or PVC stoppers to avoid direct
cotact of the upholstry with floor, with
necessary paint, polish, lippling, patti, piping,
buttons etc. as per the Bank's Engineer
approval. The seat will be measured as 533
mm / seat. The cost of upholstery cloth will
range between Rs. 450 to 500/m as per
sample approved by the Bank Engineer or
Architect.
3.00 SEAT 5000 15000.00
71 SIDE TABLE FOR SOFA
Providing and fixing side table for sofa made
from 19 mm board covered with 1.00 mm thick
laminate of approved shade & quality. The size
of side table shall be 600 mm x 600 mm
ormore as per the architects drawings. The top
shall be laminated or 12 mm thick bevelled
glass top as per approval. The sides shall be
laminated or T. W. veneer as specified in the
drawing. T.W. skirting 50 mm high & 20 mm
thick with proper polished faces and PVC
buffers to avoid direct contact with floor. All the
faces shall be polished with french polish or
mallamine polish as per architects instructions.
The rates includes all material, Labour,
Wastages, cost of polishing and hardware etc
complete.
2.00 EACH 3000 6000.00
72 CENTRE TABLE FOR SOFA
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
Providing and fixing center table for sofa made
from 19mm board covered with 1.00 mm thick
laminate of approved shade & quality The Size
of table shall be 600 mm x1200 mm or
otherwise as specified in the drawings The
sides shall be T.W. member 40 mm x 100 mm
( or as specified in the drawing) duly polished
with french polish or mallamine polish. Bottom
shelves with T.W. strips 20mm x40 mm size for
magazines etc, properly polished on all four
sides. The bottom of both the shelves to be
polished as per the architects instructions. The
legs to have PVC buffers to avoid direct
contact with the floor. If the tables are finished
with T.W. vineers, it shall have proper polished
surfaces with mallamine finish of superior
quality. The glass top (if required) shall be
properly bevelled all around as per architects
approval. 50x20 m polished wooden skirting
shall be provided or with 50x50 mm polished
wooden frame with bevelled glass top of 10
mm thickness. The rates shall includes all
material, Labour, Wastages, cost of polishing
and hardware etc complete.
1.00 EACH 4000 4000.00
73 FULL HT. STORAGE UNIT
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
Providing and fixing FULL ht. Storage units of
450mm(INNER CLEAR DEPTH), made up of
19mm MR Plywood of approved brand on top,
Bottom, vertical & horizontal shelve for (storage
of documents) support and finished with
1.0mm thick laminate of approved brand with
shade on side and top. The storage units shall
have openable / sliding shutters made up of
19mm thick MR Plywood and finished in
1.0mm thick laminate of approved brand with
shade. The storage units shall have
intermediate vertical shelves made in 12mm
thick MR Ply & Horizontal shelves provide as
per working drawing. All exposed edges to
have teak wood lipping of required size,
stained to match the desk and melamine
finished. All inner surface to be finished with
0.8mm thick laminate in white colour as per
approved brand. The works to include all
hardwares such as : castors, brass hinges, ball
catchers, locks, handles etc. of Godrej or
approved Make of MR Plywood:- Century /
Green / Archidply or Equivalent. and Laminate :-
Greenlam / Centurylam / Archidlam or
Equivalent. MODE OF MEASURMENT IS
ONLY FRONT FACE. Note:- Panels Hinges
Hafele Double Ball Bearing, Adhesive material
used as
Approved company. And Laminate shade
approved by Architects.
34.32 SQM 6000 205920.00
74 PANTRY STORAGE
Providing and fixing in position storage with
shelves and made shutters of 19mm thk. MR
Ply. The storage shall be finished externally
with 1.0mm thk. Laminated of approved shade
and internally finished in 1.0mm thk. Laminated
or paint with brass oxidised hinges, tower bolts,
ballcatches lock, handle(3" SS Handles) etc.
complete in all respect as per drawing & as per
Directed by Architect/Bank Engg. Below the
Counter: 600mm Deep Storage.
0.68 SQM 4500 3037.50
75 Buy Back of Old Furniture with all existing
partation and false ceiling etc. only visitors
chairs (s.s) and lights are not included (-)
Deduction
1.00 LUM
/SUM
35000 -35000.00
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
76 Providing Services For Existing Furnitures,
Electrical Cables with Switch Board, LAN
Cable, Storage Almirahs and other Running
services shifting for Bank staff working(Due
to Branch in Running Mode in all working
days). Required Manpower, Tools & Tackles,
Technician, Required maintenance
accessories(For Electrical, Lan etc.) & Cover
Plastic Sheet as required etc. Note:- All works
done as per instruction by Branch Manager
or Engg. In-Charge And Existing partition at
any height and false ceiling removing with
shifting as per directed by Engg. In-Charge.
1.00 LUM
/SUM
20000 20000.00
TOTAL A 2343775.96
77 CHAIRS
A OFFICERS CHAIR
Providing & laying in position Medium Back
chairs, PP Arms, Chrome Plated-matel base,
Gas lift, Net back, seat Fabric tapastry with
adjustable under support of approved shade
and Quality. Chairs to be of standard make ,
WIPRO-WEB / GEEKEN- GA-516-C /
GODREJ- Crest or Equivalent make
9.00 EACH 6500 58500.00
B EXECUTIVE CHAIRS
Providing & laying in position High Back chairs
with Armrests, swivel and Tilting arrangemnt,
Gas lift arrangement should be BIFMA
certified. Base should be chrome / Aluminium
of approved shade and Quality. Chairs to be
ofstandard make , WIPRO-ALIVIO / GEEKEN-
GA564-A /GODREJ- or Equivalent make
1.00 EACH 8000 8000.00
C VISITORS CHAIRS (OFFICER,S)
Providing & laying in position Low Back chairs
with Armrests, swivel and Tilting arrangemnt,
Gas lift arrangement should be BIFMA
certified. Base should be chrome / Aluminium
of approved shade and Quality. Chairs to be of
standard make , WIPRO-WEB / GEEKEN-
GA550 / GODREJ- Aspire or Equivalent make
27.00 EACH 6000 162000.00
TOTAL B 228500.00
CONTRACTOR SEAL AND SIGNATURE
SN DESCRIPTION NOS QTY UNTS RATE AMOUNT
TOTAL A+B 2572275.96
CONTRACTOR SEAL AND SIGNATURE