Remote Telemetry Weather Stations Boztek Solutions

02 4577 6269 / 0416 222 747 www.boztek.com.au / www.davisnet.com.au

The Davis Remote Next G Telemetry Station sends it's weather data via the Next G network to a web server where the data is stored in a MySQL data base. The stored data can be retrieved at any time in csv, tab delimited or graphical format. The station can also be accessed via your mobile phone? Simply text the station and it will text you back up to the minute weather stats. Alarm sets can be programmed EG Dew Point, Wind Speed, etc and the station will text one or more mobile phones when the alarm set is reached. The Station is powered via BP Solar Cells and can be de-

ployed in remote area for years with little maintenance.

This station is capable of monitoring:

• Temperature

• Humidity

• Dew Point

• Wind Chill

• Heat Index

• Rain fall

• Wind Speed

• Wind Direction

• Barometric Pressure

• Station Power Usage

• Optional Solar Radiation Sensor

• Optional UV Sensor

• Optional Soil Moisture ( up 4 sensors )

• Optional Soil Temperature ( up to 4 sensors )

• Optional Leaf Wetness ( up to 2 sensors )

• Optional External Temperature sensor

• Optional External Humidity Sensor

• Optional Lightning Tracking

• Optional Remote Camera

• Optional Remote Relay Switching for Irrigation, etc.

CV3000 Next G RTU

Cellular Remote Monitoring and Control

The proven, practical solution for remote site management

Introducing the fully integrated CV3000 Series remote monitoring and control module.

System Features:

Available for GSM, Next G mobile networks.

Full two-way SMS access for monitoring and control from mobile phone or PC.

Wireless Internet option for continuous data transfer:

1xRTT Next G or GPRS (GSM) options available.

Stand-alone “mini-server” program supplied with this option.

Compact integrated controller, modem, power supply, relays and isolated inputs.

Includes PC-based configuration and monitoring software.

Low power operation – engineered for solar applications.

Custom interfaces available for specialised devices, e.g.:

Composite temperature/humidity/dewpoint sensor.

Rain gauge, wind speed and direction, and soil moisture sensors.

On-board event log – logged data can be displayed graphically.

Configurable “watchdog” function to confirm system operation.

Communications “pass through” option – your SCADA software can share the on-site mobile modem.

Cross dependency of inputs e.g. “pressure fault only examined if pump is running for 30 sec.”

Relay outputs can be controlled by SMS, programmed sequence, and directly from alarm in-puts.

Versatile software control, including “one-touch” remote activation of complete control se-quences.

Optical isolation of digital inputs – wide input range.

Digital inputs can be configured as pulse-count totalisers or proportional frequency inputs.

Optional on-board GPS.

CV3000 Series System Specifications

Equipment can be started or stopped remotely by SMS commands. Analog setpoints can be set by SMS.

Alarms can be sent to any mobile phone(s) via SMS, or to any PC fitted with a GSM or Next G modem.

On-board switch-mode power supply can accept unregulated 7-40V DC in.

8 x Optically isolated digital inputs (expandable on-board to 16 in) can accept signals of up to 48 V DC.

2 x Analog inputs @ 0-10 V. (8-Ch. Analog Multiplexer due Q2, 2007, allowing total of 16 Analog In)

4 x Relay outputs (expandable on-board to 8 out), each capable of switching 5A at 240V AC.

Data logging – can store up to 12,000 events, depending on model **:

An “event” is any (digital) equipment start, stop, alarm, etc, or any logged analog values.

Analogs can be programmed to log on time period, conditional upon minimum % change.

** Model CV3110 capacity = 2,000 events.

** Model CV3100 capacity = 12,000 events.

Other models available with removable flash storage media.

Communications (factory options):

“Pass-through” port, configurable as RS232 or RS485.

Two-way translation between Modbus protocol and SMS, for direct interface to industrial controllers.

Power consumption in stand-by, with modem powered off, approx. 25 mA

Operating temperature: -25 to +70C

Humidity 5-95% non-condensing

Enclosure dimensions: 195mm x 125mm x 50mm Approx.

Free-standing Solar Option

6.5dB Hi-gain Antenna

10W BP Solarex Panel

S/Steel mount/shield

IP66 Enclosure

Mobile Phone -

SMS

Temp

Humidity

Dewpoint

Frost

Rain gauge

Wind speed

PC & modem

Pump Equipment

CV3000 Series

ETM9300 GSM/GPRS TERMINAL

Dual Band EGSM900/GSM1800/GPRS Class 10 DATA – SMS – FAX

The ETM9300 dual band GSM/GPRS modem is capable of transmitting data, short messages (SMS), and fax messages via the GSM/GPRS mobile network. Based on the Siemens GSM/GPRS dual band MC39i module, it utilises the GSM/GPRS network for convenient and inexpensive data transfer from remote instruments, meters, computers or control systems. The terminal is capable of GPRS class 8 and 10.

ETM9300 GSM/GPRS TERMINAL

Specifications

Dimensions: 93 x 52 x 25 mm

Weight: 90 grams

Serial port: 9 pin D-Sub connector

Antenna connector: FME male

Power supply: 6 - 35 Vdc

Current consumption: Idle: 10mA @ 8 Vdc

Max. aver when transmitting: 320mA @ 8 Vdc class 10

Max. aver when transmitting: 160mA @ 8 Vdc class 8

Max. peak current when transmitting @ 1 A during 1 ms

Temperature: Normal operation: -20°C to +55°C

SIM card: 3V

GSM Properties

Frequency bands: Dual Band EGSM 900 and GSM 1800

Compliant to: GSM Phase 2/2+

Transmit power: Class 4 (2W) at EGSM 900, Class 1 (1W) at GSM 180

GPRS connectivity: GPRS multi-slot class 10

GPRS mobile station class B

Data GPRS, CSD

GPRS data downlink transfer: max. 85.6 kbps

GPRS data uplink transfer: max. 42.8 kbps

Coding scheme: CS-1, CS-2, CS-3 and CS-4

Supports the two protocols used for PPP connections:

PAP (Password Authentication Protocol)CHAP (Challenge Handshake Authentication Protocol)

CSD transmission rates: 2.4, 4.8, 9.6, 14.4 kbps, non-transparent, V.110

SMS storage: SIM card plus 25 SMS locations in the mobile equip-ment

FAX Group 3: Class 1, Class 2

Support of Packet Switched Broadcast Control Channel (PBCCH) allows you to benefit from en-hanced GPRS performance when offered by the network operators.

Unstructured Supplementary Services Data (USSD) support SM,S MT, MO, CB, Text and PDU mode

Transmission of SMS alternatively over CSD or GPRS.Preferred mode can be user-define.

Model ETM9800

GSM/GPRS/EDGE/UMTS/HSDPA Terminal

With HSDPA 3.6 Mbit/s download speed, Tri-Band UMTS/HSDPA, Quad-Band GSM/GPRS/EDGE in a compact package complete with RJ12 power connection plus USB and serial interfaces the ETM9800 is the ideal solution for anyone seeking a future-proof communications device. HSDPA (High Speed Downlink Packet Access) technology is a transmission standard based on the UMTS technology, which currently allows a download speed of up to 3.6 Mbit/s. This technology packaged in a robust compact enclosure allows users to quickly access the latest 3G networks to offer services like broadband internet, e-mail access, and high-speed download of large files or streaming of video and/or audio content. In addition the ETM9800 provides backwards compatibility with the existing GSM/GPRS networks across the globe. Typical Applications Include; ◩ Security, particularly remote access to video ◩ Replacement of legacy CDMA units ◩ Automated Meter Metering ◩ Interface to data acquisition/data logging systems ◩ Broadcasting/updating of multi-media files to remote devices ◩ Alarm and control applications using SMS/GPRS/EDGE/HSDPA

Model ETM9800 GSM/GPRS/EDGE/UMTS/HSDPA Terminal

Technical Specifications

General Specifications HSDPA 3.6 Mbps Tri-Band UMTS/HSDPA (WCDMA/FDD) 850/1900/2100 MHz Quad-Band GSM 850/900/1800/1900 MHz EDGE (E-GPRS) multi-slot class 10 GPRS multi-slot class 10 UMTS/HSDPA 3GPP release 5 GSM 3GPP release 99 Output power: -Class 4 (2 W) for GSM900 -Class 3 (0.25 W) for UMTS/HSDPA -Class E2 (0.5 W) for EDGE900 -Class E2 (0.4 W) for EDGE1800 -Class 1 (1 W) for GSM1800 Control via AT commands (Hayes 3GPP TS 27.007 and 27.005) SIM Application Toolkit (release 99) Supply voltage range: +4.5 to +40V Operating Temperature: -20°C to +50°C Dimensions: 105 x 56 x 25 mm Weight: approx. 110g

Specification for HSDPA data transmission: HSDPA: max. 3.6 Mbps (DL), max. 384 kbps (UL) UE CAT [1-6], 11, 12 supported Compressed mode according to 3GPP TS25.212

Specification for UMTS data transmission: UMTS: max. 384 kbps (DL), max. 384 kbps (UL)

Specification for EDGE data transmission: EDGE class 10: max. 237 kbps (DL), max. 118 kbps (UL) Mobile station class B Modulation and coding scheme MCS 1-9

Specification for GPRS data transmission: GPRS class 10: max. 85.6 kbps (DL), max. 42.8 kbps (UL) Mobile station class B Full PBCCH support Coding schemes CS 1-4

Specification for CSD data transmission: GSM data rate 14.4 kbps, V.110 UMTS data rate 57.6 kbps, V.120 RLP (Non-transparent mode)

Specification for SMS: Point-to-point MO and MT SMS cell broadcast Text and PDU mode

Specification for fax: Group 3, class 1

Windows® XP RIL/NDIS/USB driver for devices based on Microsoft® Windows Mobile™5.0 Customer IMEI as variant Firmware update via USB

Typical Accessories Include; ◩ Antenna (numerous options) ◩ 110-240V power adaptor ◩ Power input cables RJ12/flying lead ◩ RS232 serial cables ◩ USB Cables

Remote Next G Weather Station

GSM / Next G Programming: The NEXT G RTU can be programmed via the Internet using

a Web Browsers or via SMS messages on a Mobile Phone. You can also use the NEXT G RTU

switch machinery off and on e.g. Irrigation via the Web Interface or via a Mobile Phone.

Internet GSM / Next G Network

Access your weather data and alarms

via a Web browser. All data is stored

in an SQL data base. Data can also

be downloaded as a CSV file to your

computer.

You can use your Mobile Phone to text the

Weather Station and it will text you the latest

weather stats back in seconds. The GSM /

Next G RTU can be programmed to text your

Mobile phone pre-set alarms e.g. high Temp

or even water levels via a remote sensor.

GSM / Next G RTU

Davis Remote GSM / Next G Station

Once setup the Davis Weatherlink Software will dial-out via your home Computer and analog modem direct to the GSM / Next G modem. The GSM / Next G modem will then connect and send the data request to the Davis Data Logger connected to a Davis Station Console or Davis Envoy. Once connected the Weatherlink Software will down the weather data from the Davis Data logger to your Computer. You can also watch the weather stats live via the Weatherlink Software.