Remote Controlled Fan Regulator
-
Upload
hemant-ojha -
Category
Documents
-
view
577 -
download
4
description
Transcript of Remote Controlled Fan Regulator
WelcomeWelcome
A Presentation on A Presentation on REMOTE CONTROLLED FAN REMOTE CONTROLLED FAN
REGULATORREGULATOR
Guided By:Prof. Abhishek choubey
(H.O.D EC Dept.)
Prepared By:Hemant Kr.Ojha(0104EC081038)Kumar Mayank(0104ec081044)Akhilesh Mishra(0104ec081009)Brijkishore Gupta(0104ec081023)Deepak Gupta(0104it081029)
CONTENTSCONTENTS
INTRODUCTION CIRCUIT DIAGRAM WORKING PIN CONFIGURATION OF IC APPLICATIONS LIMITATION SUMMARY REFERENCES
CIRCUIT DIAGRAMCIRCUIT DIAGRAM
How the circuit works?How the circuit works?
The 230 V from AC mains is stepped down to The 230 V from AC mains is stepped down to 12V and Regulated by IC7809, capacitor and 12V and Regulated by IC7809, capacitor and Diodes to 9V. Diodes to 9V.
The remote control produces infrared rays The remote control produces infrared rays
which is received by the TSOP 1738 infrared which is received by the TSOP 1738 infrared receives module.receives module.
Its output is given as a trigger to the first Its output is given as a trigger to the first monostable multivibrator NE 555.monostable multivibrator NE 555.
The output of decade counter is taken The output of decade counter is taken through Resistors R5 to R9 and capacitor C5 through Resistors R5 to R9 and capacitor C5 controls the pulse width which is actually controls the pulse width which is actually determining the speed of the fandetermining the speed of the fan
How the circuit works?How the circuit works? Another NE 555 is used here, Another NE 555 is used here,
multivibrator is triggered by pulses multivibrator is triggered by pulses from opto coupler MCT2E.from opto coupler MCT2E.
The output from counter is given to The output from counter is given to NE555 and this is given to the NE555 and this is given to the transistor BC548transistor BC548
It is given to the Opto isolator MOC It is given to the Opto isolator MOC 3021. It is used for driving the Triac 3021. It is used for driving the Triac BT136BT136
How the circuit works?How the circuit works? Resistors R5 to R9 and capacitor C5 are used to Resistors R5 to R9 and capacitor C5 are used to
control the pulse width. control the pulse width.
As the pulse width decreases firing angle of the As the pulse width decreases firing angle of the triac increases and speed of the fan also triac increases and speed of the fan also increasesincreases
remote controller controls the pulse width,which remote controller controls the pulse width,which in turn varies the firing angle of triac, and there in turn varies the firing angle of triac, and there by varying the speed of the fanby varying the speed of the fan
PIN CONFIGURATION OF IC PIN CONFIGURATION OF IC (1) NE 555 TIMER(1) NE 555 TIMER
PIN CONFIGURATION OF IC PIN CONFIGURATION OF IC (2) CD4017(2) CD4017
IC(4) MOC 3021IC(4) MOC 3021
IC(5)MCT 2EIC(5)MCT 2E
IC(6)7809IC(6)7809
APPLICATIONAPPLICATION
Remote controlled Fan Regulator is Remote controlled Fan Regulator is used to control the speed of fan from used to control the speed of fan from our bed or couch. our bed or couch.
The same circuit finds its use to The same circuit finds its use to control the Intensity of light at control the Intensity of light at various levels.various levels.
This circuit also finds it use for This circuit also finds it use for switching ON and OFF any electronic switching ON and OFF any electronic circuit.circuit.
ADVANTAGESADVANTAGES
This circuit is simple to use and This circuit is simple to use and efficient.efficient.
It can be assembled with ease. It can be assembled with ease. It is cheap and hence very economic. It is cheap and hence very economic. It is small in size. It is small in size.
REFERENCESREFERENCES
www.google.comwww.google.com www.wikipedia.comwww.wikipedia.com www.electronics4u.comwww.electronics4u.com www.researchcell.comwww.researchcell.com
Thank YouThank You
Any Any Queries????Queries????