Remote Settings on your AC

Power

Operation Mode : Fan / Cool / Dry / Heat

Power

Clock Setting the clock for auto switch off

Quick Cooling

Swing effect

Fan Speed

Power Saving

ICONS

Power Temperature Auto Cool Dry/Humidity

Heat Fan Quiet Swing Timer

Sleep

HOW TO SET THE TEMPERATURE

1) Before setting check if the AC is not on AUTO mode2) Up or Down arrows OR + / - 3) Display will reflect the temperature set4) Optimal temperature setting is between 20 to 24 C5) Temp on the remote displays set temperature

OPERATION MODE SETTING

The AC will automatically set the temperature and fan speeddepending on the room temperature detected by the room temperature.

The air conditioner in Dry mode acts like a dehumidifier by removing moisture from the indoor air. Dry mode makes the air feel refreshing in a humid climate especially in the month of May & June.

The AC will cool your room. You can adjust the temperature and the fan speed to feel cooler in hot season.

FAN SPEED SETTING

T

Fan mode can be selected to ventilate your room. Fan mode will be helpful to refresh the stale air in your room.

Cooling effect is minimal in this mode.

QUIET MODE

The operation reduces airflow noise.

When the airflow is set to this mode, the noise from the

indoor unit will become quieter.

POWERFUL AKA TURBO MODE

To reach preset temperature in the shortest time & for extended airflow.

When you press this button on cooling mode, the unit will blow strong cooling air with

super high fan speed.

TURBO operation ends in 20 minutes. Then the system automatically operates again

with the previous settings which were used before TURBO operation.

It does not work in Auto / Dry or Fan Modes.

DIRECTION OF AIRFLOW SWING ACTION

To Adjust the vertical/horizontal airflow direction which keeps the room ventilated.

In COOL / DRY mode, if AUTO is set, the louver swing up/down & left/right automatically.

The TIMER ON feature is useful when you want the unit to turn on automatically before your guests arrive. The AC will automatically start operating at the set time. To start the air conditioner in 6 hours. 1. Press the TIMER ON button

2. Set the TIMER ON button to display

Wait for 3 seconds and the digital display area will show the temperature again.

The "TIMER ON" indicator remains on and this function is activated.

TIMER ON

TIMER OFF

Timer functions are useful for automatically switching the air conditioner off at night 1. Press “OFF TIMER button”

2. Press “SELECT button” until the time setting reaches the point you like. • Every pressing of either button increases or decreases the time setting. Holding down either button changes the setting rapidly.

3. Press “OFF TIMER button” again. The TIMER lamp lights up.

To cancel the OFF TIMER Operation, Press “CANCEL button”

The TIMER lamp goes off.

SLEEP MODE AKA ECONOMY MODE

For low energy consumption - For Rooms in Hotels/ Institutions/ Organisations

1. Press the SLEEP MODE AUTO BUTTON to set the time when you want the

unit to stop automatically.

2. The timer is programmed in one-hour increments by pressing the SLEEP

MODE AUTO BUTTON 1 to 7 times..

The cooling operation enables the set temperature to increase 1℃ after 1 hour and another 1℃ automatically after 1 hour. After the setting of sleeping mode, the heating operation enables the set temperature to drop 2℃ after 1 hour and another 2℃ automatically after 1 hour. The air-conditioner runs in sleeping mode for 7 hours and stops automatically.

And Finally….

Generally how much time does a 1 ton / 1.5 ton AC take to show cooling

If despite of all corrected settings, your machine doesn’t function as per standard, do check if the batteries are worn out.