Reliable and Durable Solutions for Parking Structures
Transcript of Reliable and Durable Solutions for Parking Structures
CONSTRUCTIONRELIABLE AND DURABLE SOLUTIONS FOR PARKING STRUCTURES
2CONSTRUCTIONRELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
PROTECTION FROM THE BASE-MENT TO THE ROOF
Flooring for ground bearing slabs, Page 6
Roof
Top decks and exposed areas
Ground floor/on-grade slabs
Intermediate decks
COMPLETE PROTECTION OF PARKING STRUCTURES Car parks provide protection to thousands of cars every day. However, what about the parking structures themselves? If the structure and building envelopes are not protected, or inad-equately protected, this can cause owners and operators many unpleasant and costly surprises. Sika provides high quality prod-ucts and systems to provide complete protection with no nasty surprises. The schematic below illustrates some of the key prob-lem areas and the Sika solutions outlined this brochure.
Concrete repair and refurbishment
Corrosion and fire protection for steel structures
Floor joint and detailing solutions
Waterproofing solutions for the building envelope
3CONSTRUCTION
RELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
Floor joint and detailing solutions, Page 20
Waterproofing for the building envelope, Page 26
Flooring for ramps and entrance areas, Page 14
Flooring for top decks and exposed areas, Page 12
Flooring for intermediate decks, Page 8
Ramps
Top decks and exposed areas Flooring for entrace areas, walkways and staircases, Page 18
Roofing, Page 32Concrete repair and refurbishment, Page 28
Corrosion and fire protection for steel structures, Page 24
4CONSTRUCTIONRELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
PARKING STRUCTURES TODAY
INTRODUCTIONParking has become a vital part of to-day's mobile community, especially in metropolitan areas including airports, all of which are growing at an ever faster rate. This means continually providing more parking spaces by building new car parks and even more frequently extending and refurbishing existing ones.
Given the choice – Where would you park?Successful parking structures are designed to meet the users demands, which usually include feeling safe and welcome, plus knowing that their cars are in a secure environment. Given the choice, people always park in bright and well lit car parks, where they feel that they, as well as their car and its con-tents will be safe and secure.
NEW BUILDParking structures are essential and are now fully integrated into modern architectural design. They are frequent-ly built using “fasttrack” construc-tion techniques, with as much off-site construction as possible, to reduce the disruption in urban areas.Therefore precast and prefabricated sections of steel frames with reinforced concrete decks and stairways are usu-ally combined in composite structures for new car parks.
REFURBISHMENT Most existing multi-storey car parks have been built since the 1950’s and they are predominantly of reinforced concrete construction. Many have a long history of early deterioration, structural defects and other shortcomings, which are primarily due to inadequate design, inadequate workmanship, inadequate materials, a lack of maintenance, or very often a combination of all of these factors.
THE EFFECTIVE PROTECTION OF NEW PARKING STRUCTURES WILL PREVENT COSTLY REFURBISHMENT AND MAINTENANCE IN THE FUTURE.
5CONSTRUCTION
RELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
INVESTIGATION AND CONDITION SURVEYS OF EXISTING PARKING STRUCTURESParking structures have traditionally been built to ‘Building Standards’, yet their exposure is frequently similar to that of Civil Engineering structures built to much higher requirements, such as bridges. As a result, relatively rapid deterioration, particularly with reinforcement corrosion due to the ingress of water and de-icing salts, has led to the closure of many areas and even whole car parks, for costly repair, protection and even complete replace-ment. These bad experiences have served to highlight and emphasise the need for improved design, workmanship and the materials selected to ensure the more du-rable performance and public safety.
In order to discover the root causes of distress and deterioration in a parking structure, it is always essential to carry out a professional Condition Survey and Assessment, whilst it is obviously also im-portant to balance the cost of this inves-tigative work with the benefits that the results will provide. An appropriate survey is often the key to successfully designing the refurbishment, then maintaining and extending the service life of multi-storey parking structures.
TYPICAL EXPOSURE CONDITIONS IN PARKING STRUCTURESMulti-storey and also underground car parks are subject to many different stresses from their daily use and exposure including:
Wide themperature variations and fluctuations Rain, driving rain, snow and ice Atmospheric carbonation of the concrete De-icing salts effects Automotive fluids Traffic – vehicular and pedestrian Structural movement / settlement Groundwater
6CONSTRUCTIONRELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
FLOORING SYSTEMS FOR GROUND BEARING SLABS
The epoxy resin based, rigid Sikafloor® MultiDur EB-14 is a standard solution to protect the ground bearing slab. With high wear and chemical resistance it is a cost effective standardised solution for typical ground floors in multi-storey car parks. When lower levels of exposure are anticipated, good protection can also be provided using Sikafloor® HardTop CS-23 W, which creates a monolithic concrete floor finish that is an economic solution for surface hard-ening and good wear resistance.
In some buildings groundwater pres-sure can impose additional stress on the ground floor deck coating system from below, which can sometimes appear as blistering in flexible coatings and/or in delamination of larger area. In these situations a water vapor permeable coating system as Sikafloor® MultiDur WB-10, can relieve and accommodate this pressure without adverse effect on the resinous top coating system. Additional the epoxy resin based prim-ers Sikafloor®-160, Sikafloor®-161 and Sikafloor®-701 fulfil EN 13578 as being suitable for use on wet concrete and therefore these can also provide a safe base coat for the desired subsequent resin coating layers.
The 30 year track record of Sikafloor® EpoCem systems providing solutions as as a temporary moisture barrier (TMB) to allow successful resin coating system applications on green or damp concrete, clearly shows the ideal way to achieve durable long term success for applica-tions on such challenging substrates. Sikafloor® EpoCem bonds perfectly to green or hardened concrete, whether dry or damp and uniquely therefore pre-vents osmotic blistering of resin based coatings over damp substrates. This system is also now known as Sikafloor® MultiDur EB-14 ECC.
7CONSTRUCTION
RELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
SYSTEM Sikafloor® HardTop CS-23 W Sikafloor® MultiDur EB-14 ECC
Sikafloor® MultiDur EB-14 Sikafloor® MultiDur WB-10
DESCRIPTION Monolithic finish for concrete floors
Broadcast unicolor epoxy floor covering thin layer over epoxy hybrid screed
Broadcast unicolor epoxy florr covering
Double water based epoxy roller coat
NOMINAL THICKNESS / LAYERS
< 1 mm
1
2 – 4 mm
3
2 - 3 mm < 1 mm
2
CHARACTERISTICS Economic surface hardening
Good abrasion resistance Good impact resistance Vapor permeable Color options
Cold storage (> -10°C) High wear resistance Good mechanical
resistance Medium thermal shock
resistance Slip resistance Color options
Cold storage (> -10°C) Highwear resistance Good mechanical
resistance Medium thermal shock
resistance Meets German Standard
OS-8 Slip resistance Color options
Light to medium wear resistance
Surface stabilization Prevents surface dusting Color options
SYSTEM COMPONENTS
Sikament® or Sika® ViscoCrete® slab
Sikafloor®-3 QuartzTop Sikafloor®-ProSeal W /
ProSeal 22
Sikafloor®-155 WN or -160 Sikafloor®-81 EpoCem® Quartz sand
(0.4 – 0.7 mm) Sikafloor®-264
Sikafloor®-156/-161/-160 Quartz sand
(0.4 – 0.7 mm) Sikafloor®-264
Sikafloor® 2540 W Quartz sand
(0.4 – 0.7 mm) Sikafloor®-2540 W
8CONSTRUCTIONRELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
FLOORING SYSTEMS FOR INTERMEDIATE DECKS
On intermediate decks the traffic can impart significant and often high stresses on the surface, into the con-crete substrate and the whole structure. Therefore tough and rigid systems are used to protect against damage in a cost effective way. Sikafloor® MultiDur EB-24 and the fast curing variants Sika-floor® Pronto RB-25 or RB-28, which are based on methacrylate, are durable deck coating solutions.
In a filigree load carrying structure such as many modern parking structures, cracks are likely to form and then to open and close in the decks. Therefore Sika provides solutions that are elastic and crack-bridging as well as being extremly wear resistant to accommodate these cracks and the abrasive traffic loadings.
The Sikafloor® Multiflex PB-51, PB-52 and PB-54 deck coating systems all meet the stringent German OS 11 a/b certificate standards of high dynamic crack bridging. The Sikafloor® Multiflex PB-21 (OS 13) and PB-32 systems are also tough elastic solutions with good crack bridging abilities for areas with more limited requirements in this respect.
9CONSTRUCTION
RELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
SYSTEM Sikafloor® MultiFlex PB-21 Sikafloor® MultiFlex PB-51 Sikafloor® MultiFlex PB-52 Sikafloor® MultiFlex PB-54
DESCRIPTION Broadcast unicolor high performance polyurethane floor covering
Broadcast colored crack bridging system
Broadcast colored crack bridging system
Broadcast car park deck flooring and waterproofing system
NOMINAL THICKNESS / LAYERS
2 – 3 mm
3
3 – 4 mm
3
3 – 5 mm
4
3 – 5 mm
4
CHARACTERISTICS Static crack bridging properties (> -10°C)
Meets German Standard OS 13
Abrasion resistance Waterproofing Color options
Wear resistance Waterproofing Slip resistance High flexibility Meets German Standard
OS 11b Crack bridging at low
temperature Color options
Wear resistance Waterproofing Slip resistance Meets German Standard
OS 11a Very high flexibility /
crack bridging at low temperature
Color options
Wear resistance Slip resistance High flexibility Meets German Standard
OS 11a Color options
SYSTEM COMPONENTS
Sikafloor®-156/-161/-160 Sikafloor®-375 Quartz sand
(0.7 – 1.2 mm) Sikafloor®-378
Sikafloor®-156/-161/-160 Sikafloor®-350 N Quartz sand
(0.4 – 0.7 mm) Sikafloor®378
Sikafloor®-156/-161/-160 Sikafloor®-350 N Sikafloor®-375 Quartz sand
(0.7 – 1.2 mm) Sikafloor®-378
Sikafloor®-156/-161/-160 Sikalastic®-851 Sikafloor®-375 Quartz sand
(0.7 – 1.2 mm) Sikafloor®-378
ELASTIC Sikafloor® SYSTEMS
10CONSTRUCTIONRELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
SYSTEM Sikafloor® MultiFlex PB-32 Sikafloor® MultiDur EB-24 Sikafloor® Pronto RB-25 Sikafloor® Pronto RB-28
DESCRIPTION Broadcast unicolor tough elastic polyurethane floor covering
Slip resistant broadcast unicolor epoxy floor covering
Elastomeric waterproofing system for flooring applications
Crack bridging waterproofing system for flooring applications
NOMINAL THICKNESS / LAYERS
2 – 3 mm
3
2 – 4 mm
3
3 – 5 mm
3
3 – 5 mm
3
CHARACTERISTICS Static crack bridging properties
Abrasion resistance Waterproofing Slip resistance Color options
Cold storage (> -10°C) High wear resistance Good mechanical
resistance Slip resistance Color options
Crack bridging Rapid curing Good wear resistance Good chemical resistance Slip resistance Color options
Rapid curing Crack bridging Medium wearing
resistance Waterproofing Slip resistance Color options
SYSTEM COMPONENTS
Sikafloor®-156/-161/-160 Sikafloor®-3240/-324 Quartz sand
(0.4 – 0.7 mm) Sikafloor®-378
Sikafloor®-156/-161/-160 Sikafloor®-263 SL Quartz sand
(0.4 – 0.7 mm) Sikafloor®-264
Sikafloor®-10/-11/-13 Pronto
Sikafloor®-15 Pronto Quartz sand
(0.7 – 1.2 mm) Sikafloor® 18-Pronto
Sikafloor®-10/-11/-13 Pronto
Sikafloor®-32 Pronto Quartz sand
(0.7 – 1.2 mm) Sikafloor®-18 Pronto
TOUGH ELASTIC AND RIGID Sikafloor® SYSTEMS
FAST ELASTIC Sikafloor® SYSTEMS
11CONSTRUCTION
RELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
12CONSTRUCTIONRELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
FLOORING SYSTEMS FOR TOP DECKS AND EXPOSED AREAS
Because of their exposure to the elements, the top decks and externally exposed areas of parking structures suffer not only from the diverse stresses of vehicular traffic and chemical attack, but the seasonal and daily thermal variations and fluctuations which cause significant dimensional changes in the structure and its components. The Sikafloor® parking structure systems are specifically designed to accommodate and where possible to absorb this stress and ensure the waterproofing and protection are maintained durably over time. In these exposed areas it is of course very important to properly plan the drainage and also the color of the decks. Lighter colors have higher solar reflectance and can therefore help in keeping a building cool. Sika provides system solutions for every application area and exposure requirements.
Highly crack bridging systems based on polyurethane resin, are Sikafloor® Multiflex PB-51 UV, PB-52 UV and PB-54 UV, which have UV stable top coats and also good color retention over time.
Additionally, in order to be as weather independent as possible during the application period or when a fast return to service during refurbishment is needed, Sika also provides alternative rapid hardening, methacrylate based coating systems, Sikafloor® Pronto RB-28 and RB-55, plus the highest performance Sikafloor® Pronto RB-58 system. This system has the highest dynamic crack bridging capabilities in accordance with class B 4.2 of DIN -EN 1062-7 in combination with its tough and resilient, UV resistant top coat.
SYSTEM Sikafloor® MultiFlex PB-52 UV Sikafloor® MultiFlex PB-51 UV Sikafloor® MultiFlex PB-54 UV Sikafloor® Pronto RB-28 Sikafloor® Pronto RB-55 Sikafloor® Pronto RB-58
DESCRIPTION Broadcast car park deck flooring and waterproofing system with UV sealer
Broadcast colored crack bridging system with UV sealer
Broadcast car park deck flooring and waterproofing system with top sealer over elastic membrane
Crack bridging waterproofing system for flooring applications
Highly elastometic waterproofing system for flooring applications
Extremely crack bridging waterproofing system for flooring applications
NOMINAL THICKNESS / LAYERS
3 – 5 mm
4
3 – 4 mm
3
3 – 5 mm
4
3 – 5 mm
3
5 – 7 mm
4
5 – 7 mm
4
CHARACTERISTICS Dynamic and static crack bridging properties (> -20°C)
Meets German Standard OS-11a
Abrasion resistance Waterproofing Color options
Dynamic and static crack bridging properties (> -20°C)
Meets German Standard OS-11b
Abrasion resistance Waterproofing Color options
Wear resistance Slip resistance High flexibility UV stability Color options
Rapid curing Crack bridging Medium wearing
resistance Waterproofing Slip resistance Color options
Highly crack bridging Rapid curing Good wear resistance Good chemical resistance Slip resistance Color options
Dynamic and static crack bridging properties (> -20°C)
Extremely crack bridging, low temperature flexibility
Meets German Standard OS-10
Waterproofing Slip resistance Color options
SYSTEM COMPONENTS
Sikafloor®-156/-161/-160 Sikafloor®-350 N Sikafloor®-375 Quartz sand
(0.7 – 1.2 mm) Sikafloor®-359 N
Sikafloor®-156/-161/-160 Sikafloor®-350 N Quartz sand
(0.4 – 0.7 mm) Sikafloor®-359 N
Sikafloor®-156/-161/-160 Sikalastic®-851 Sikafloor®-375 Quartz sand
(0.7 – 1.2 mm) Sikafloor®-359 N
Sikafloor®-10/-11/-13 Pronto
Sikafloor®-32 Pronto Quartz sand (0.7 –
1.2 mm) Sikafloor®-18 Pronto
Sikafloor®-10/-11/-13 Pronto
Sikafloor® 15 Pronto Sika® Reemat Premiuim Sikafloor® 15 Pronto Quartz sand
(0.7 – 1.2 mm) Sikafloor®-18 Pronto
Sikafloor®-10/-11/-13 Pronto
Sikafloor®-32 Pronto Sika® Reemat Premium Sikafloor®-32 Pronto Quartz sand
(0.7 – 1.2 mm) Sikafloor®-18 Pronto
ELASTIC Sikafloor®
13CONSTRUCTION
RELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
SYSTEM Sikafloor® MultiFlex PB-52 UV Sikafloor® MultiFlex PB-51 UV Sikafloor® MultiFlex PB-54 UV Sikafloor® Pronto RB-28 Sikafloor® Pronto RB-55 Sikafloor® Pronto RB-58
DESCRIPTION Broadcast car park deck flooring and waterproofing system with UV sealer
Broadcast colored crack bridging system with UV sealer
Broadcast car park deck flooring and waterproofing system with top sealer over elastic membrane
Crack bridging waterproofing system for flooring applications
Highly elastometic waterproofing system for flooring applications
Extremely crack bridging waterproofing system for flooring applications
NOMINAL THICKNESS / LAYERS
3 – 5 mm
4
3 – 4 mm
3
3 – 5 mm
4
3 – 5 mm
3
5 – 7 mm
4
5 – 7 mm
4
CHARACTERISTICS Dynamic and static crack bridging properties (> -20°C)
Meets German Standard OS-11a
Abrasion resistance Waterproofing Color options
Dynamic and static crack bridging properties (> -20°C)
Meets German Standard OS-11b
Abrasion resistance Waterproofing Color options
Wear resistance Slip resistance High flexibility UV stability Color options
Rapid curing Crack bridging Medium wearing
resistance Waterproofing Slip resistance Color options
Highly crack bridging Rapid curing Good wear resistance Good chemical resistance Slip resistance Color options
Dynamic and static crack bridging properties (> -20°C)
Extremely crack bridging, low temperature flexibility
Meets German Standard OS-10
Waterproofing Slip resistance Color options
SYSTEM COMPONENTS
Sikafloor®-156/-161/-160 Sikafloor®-350 N Sikafloor®-375 Quartz sand
(0.7 – 1.2 mm) Sikafloor®-359 N
Sikafloor®-156/-161/-160 Sikafloor®-350 N Quartz sand
(0.4 – 0.7 mm) Sikafloor®-359 N
Sikafloor®-156/-161/-160 Sikalastic®-851 Sikafloor®-375 Quartz sand
(0.7 – 1.2 mm) Sikafloor®-359 N
Sikafloor®-10/-11/-13 Pronto
Sikafloor®-32 Pronto Quartz sand (0.7 –
1.2 mm) Sikafloor®-18 Pronto
Sikafloor®-10/-11/-13 Pronto
Sikafloor® 15 Pronto Sika® Reemat Premiuim Sikafloor® 15 Pronto Quartz sand
(0.7 – 1.2 mm) Sikafloor®-18 Pronto
Sikafloor®-10/-11/-13 Pronto
Sikafloor®-32 Pronto Sika® Reemat Premium Sikafloor®-32 Pronto Quartz sand
(0.7 – 1.2 mm) Sikafloor®-18 Pronto
ELASTIC Sikafloor® FAST ELASTIC Sikafloor® SYSTEMSSYSTEMS
14CONSTRUCTIONRELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
FLOORING SYSTEMS FOR RAMPS AND ENTRANCE AREAS
Car park entrances and ramps usually have the highest traffic loading in terms of frequency, breaking and accelera-tion, sometimes in combination with higher speeds, which dictate the need for the highest resistance and durability against this stress. High slip resistance is frequently an additional require-ment in these areas, in order to prevent cars from crashing into kerbs, walls or barriers. Sikafloor® MultiDur EB-14 is a cost effective and tough, rigid system designed to withstand these high de-mands. The polyurethane resin based Sikafloor® Multiflex PB-32 is a tough elastic system which can also absorb some significant movement of the structure.
The ramps and entrance areas are of-ten sections that cannot be closed or blocked off for maintenance works, or if they can, then only for a very short time. For refurbishment works in these areas the very fast curing and tough elastic Sikafloor® Pronto RB-25 and RB-55 systems, are ideal and enable the areas to be put back in to service with the minimum of delay.
The unique Sikafloor® OneShot PB-55 and PB-55 UV systems are the ulti-mate problem solvers on the market for this type of critical application. They combine the performance properties of a top quality deck coating with the speed of application of a spray applied polyurea membrane and the whole system build-up is completed in less than one day and trafficable after just a few hours. The Sikafloor® OneShot system properties in service also exceed the performance requirements in terms of wear resistance, crack bridging and durability for a long service-life.
Contact your local Sika technical department to help design and specify the right system, tailored to your specific needs and requirements for application and service in each area.
15CONSTRUCTION
RELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
SYSTEM Sikafloor® MultiFlex PB-32 Sikafloor® MultiDur EB-14 Sikafloor® Pronto RB-25 Sikafloor® Pronto RB-55
DESCRIPTION Broadcast unicolor tough elastic polyurethane floor covering with UV sealer
Broadcast unicolor epoxy florr covering
Elastomeric waterproofing system for flooring applications
Highly elastometic waterproofing system for flooring applications
NOMINAL THICKNESS / LAYERS
2 – 3 mm
3
2 - 3 mm 3 – 5 mm
3
5 – 7 mm
4
CHARACTERISTICS Static crack bridging properties
Abrasion resistance Slip resistance Color options UV stability
Cold storage (> -10°C) Highwear resistance Good mechanical
resistance Medium thermal shock
resistance Meets German Standard
OS-8 Slip resistance Color options
Crack bridging Rapid curing Good wear resistance Good chemical resistance Slip resistance Color options
Highly crack bridging Rapid curing Good wear resistance Good chemical resistance Slip resistance Color options
SYSTEM COMPONENTS
Sikafloor®-156/-161/-160 Sikafloor®-3240/-324
Quartz sand (0.4 – 0.7 mm)
Sikafloor®-378 N
Sikafloor®-156/-161/-160 Quartz sand
(0.4 – 0.7 mm) Sikafloor®-264
Sikafloor®-10/-11/-13 Pronto
Sikafloor® 15 Pronto Quartz sand
(0.7 – 1.2 mm) Sikafloor® 18-Pronto
Sikafloor®-10/-11/-13 Pronto
Sikafloor® 15 Pronto Sika® Reemat Premium Sikafloor® 15 Pronto Quartz sand
(0.7 – 1.2 mm) Sikafloor®-18 Pronto
16CONSTRUCTIONRELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
SIKA ONE SHOT PARKDECK SYSTEMShort Down Time = Money Saving with Innovative Sikalastic®-8800 Spray Applied Injection Technology Combining Polyurea and Aggregates.
Time saving Material saving Short downtime: time need for
the new method: 1 day Low consumption of aggregate
compared to the conventional (manual) method. (approx. 1.5 – 3 kg instead of 6-8 kg)
Excess of sand does not need to be removed, because the sand is fully bonded
Lower labor cost High durability Fast curing Highly flexible Permanent water and
weather resistance Slip resistance
ADVANTAGE OF THE NEW CARPARK DECK FLOORING SYSTEM
PRIMING8:00 h Priming with the ultra-rapid Sika®-Concrete Primer and 30 minutes later spraying of the crack-bridging waterproofing membrane Sikalastic®-8800 at a film thickness of 1.5 mm.
INJECTION11:00 h Injection of aggregates in the spray pattern of the Polyurea Sikalastic®-8800 in order to install the non-slip surface.
ROLLER APPLICATION14:00 h Roller application of the top coat Sikalastic®-8450.
READY TO USE20:00 h
SYSTEM Sikafloor® OneShot PB-57 UV
DESCRIPTION UV resistant, fast curing broadcast high performance polyurethane floor covering with top sealer over elastic membrane
NOMINAL THICKNESS / LAYERS
3 – 5 mm
3
CHARACTERISTICS Rapid curing High wear resistance Waterproofing Meets Germann standard
OS10 Slip resistance Color options
SYSTEM COMPONENTS
Sika®-Concrete primer Sikalastic®-8800 plus sand Quartz sand (0.7 – 1.2 mm) Sikalastic®-8450
17CONSTRUCTION
RELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
18CONSTRUCTIONRELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
SYSTEM Sikafloor® MultiDur WS-10 Sikafloor® MultiDur ET-14 Sikafloor® MultiDur EB-24
DESCRIPTION Double water based epoxy roller coats
Textured unicolor epoxy roller coats
Broadcast unicolor epoxy floor covering
NOMINAL THICKNESS / LAYERS
< 1 mm
2
< 1 mm
2
2 – 4 mm
3
CHARACTERISTICS Light to medium wear resistance
Surface stabilization Prevents surface dusting Color options
Good wear and abrasion resistance
Good chemical resistance Slip resistance Easy cleaning Color options
Cold storage (> -10°C) High wear resistance Good mechanical
resistance Medium thermal shock
resistance Slip resistance Color options
SYSTEM COMPONENTS
Sikafloor®-2540 W Sikafloor®-2540 W
Sikafloor®-156/-161/-160 Sikafloor®-264 Thixo
Sikafloor®-156/-161/-160 Sikafloor®-263 SL Quartz sand
(0.4 – 0.7 mm) Sikafloor®-264
FLOORING SYSTEMS FOR ENTRANCE AREAS, WALKWAYS AND STAIRCASES
PEDESTRAIN TRAFFIC
19CONSTRUCTION
RELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
SYSTEM Sikafloor® DecoDur ES-22 Granite
Sikafloor® DecoDur ES-26 Flake
Sikafloor® DecoDur EB-26 Quartz
DESCRIPTION Smooth low VOC colored granite effect epoxy floor covering
Smooth low VOC colored full flaked epoxy floor covering
Slip resistant low VOC color quartz broadcast epoxy floor covering
NOMINAL THICKNESS / LAYERS
2 – 3 mm
3
2 – 3 mm
4
2 – 3 mm
3
CHARACTERISTICS Food contact compliant Low particle emissions Colored granite effects Designer aesthetics Medium slip resistance
optional Low VOC Color options
Food contact compliant Low particle emissions Colored flake effects Medium slip resistance
optional Low VOC Color options
Food contact compliant Low particle emissions Colored sand effects Good mechanical
resistance Slip resistance Low VOC Color options
SYSTEM COMPONENTS
Sikafloor®-264 Sikafloor®-169 Sikafloor®-DecoFiller Sikafloor®-304 W
Sikafloor®-156/-161/-160 Sikafloor®-264 Sika® PVA ColorFlakes
(3 mm) Sikafloor®-169 Sikafloor®-304 W
Sikafloor®-156/-161/-160 Sikafloor®-263 SL or -264 Colored quartz sand
(0.3 – 0.8 or 0.7 – 1.2 mm) Sikafloor®-169
PEDESTRAIN TRAFFIC
20CONSTRUCTIONRELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
INNOVATIVE FLOOR JOINT SOLUTIONSHardly any vibrations noticeable and rapid return to service
FLOOR JOINTS IN PARKING GARAGE DECKS are a major challenge in both new construction and the refurbishment of existing structures, as their water tightness is one of the key factors for durability. With specially designed connection flanges, Sika® FloorJoint PD and Sika® FloorJoint PDRS are combined with Sikadur® Combiflex® SG to provide 100% watertight movement joints.
As previously mentioned in regard to modern parking struc-tures and customer preference, the environment and aesthet-ics play an increasingly important role. In addition to creating a lot of undesirable traffic noise, traditional metal edged and mechanical movement joint systems have clear limitations where the joint line and widths are variable or complex in these situations. Also when noise reduction is specifically re-quired the Sika® FloorJoint PD joint panel proves its strengths. This prefabricated carbon fibre reinforced polymer concrete panel fits seamlessly and virtually invisibly into the joints and with the adjacent resin coating systems and floor coverings. In the difficult areas where ramps and deck / floor slabs con-nect, vertical movement in these joints can often occur and cause problems; there is also the potential for larger vertical joint movement caused by the extended length of the slabs. In these situations Sika® FloorJoint PDRS is the perfect solu-tion as the concentric integral rubber seal allows for greater movement and at the same time it protects the watertight Sikadur® Combiflex® system from damage.
The top decks of car parks are generally uncovered in most countries and due to the temperature variation (Delta-T) from summer to winter, there will be greater expansion and contraction of the concrete deck slabs than in covered parking decks or underground car parks. The necessary joint locations, dimensions and movement capability must be calculated by the responsible structural engineer, and this then determines the right choice between Sika® FloorJoint PD and PDRS. Normally Sika® FloorJoint PDRS is more suitable for these externally exposed installations because of its higher move-ment capability. The STUVA test institute in Cologne has special test equip-ment to simulate nearly 300’000 vehicle overruns at 50 Km/h, by truck tires with a weight of 10 tonnes. This test is much too severe to simulate a car park environment, but even when tested under these harsh conditions, both Sika® Floor-Joint PD and Sika® FloorJoint PDRS achieved top results and remained completely intact.
21CONSTRUCTION
RELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
For gaps in the substrate with a maximum width of 60 mm (maximum positive joint movement = 40 mm)
For gaps in the substrate with a maximum width of 50 mm (maximum positive joint movement = +50 mm)
CHARACTERISTICS / ADVANTAGES High mechanical and chemical resistance Non-corroding Waterproof system design possible Grindable profile for level integration into the floor surface Hardly any vibrations noticeable under direct car or forklift
traffic Thermal expansion coefficient similar to resin-based floors Easy to install / Easy to repair Short downtime / Trafficable after 24 h
Sika® FloorJoint PB-30 PD Sika® FloorJoint PB-30 PDRS
1. Waterproofing Sikadur®-30 or Sikadur®-31 CF normal + Sikadur® Combiflex® SG-10 P
2. Backing rod Sika® Backing Rod, size according width of the joint
3. Adhesive Sikadur®-30 Normal or Sikadur®-31 Normal
4. Floor panel Sika® FloorJoint PD jointed with Sikaflex® Pro-3
5. Wearing course e.g. Sikafloor®-156/-161 + Sikadur®-375, broadcast to excess
6. Top coat e.g. Sikafloor®-359 N
1. Adhesive Sikadur®-30 or Sikadur®-31 CF normal
2. Waterproofing Sikadur®-30 or Sikadur®-31 CF normal + Sikadur® Combiflex® SG-10 P
3. Floor panel with rubber seal
Sika® FloorJoint PDRS, the rubber seal is bonded with SikaBond® TF plus N
4. Wearing course e.g. Sikafloor®-156/-161 + Sikadur®-375, broadcast to excess
5. Top coat e.g. Sikafloor®-359 N
CHARACTERISTICS / ADVANTAGES Exchangable rubber seal High mechanical and chemical resistance Non-corroding Waterproof system design possible Grindable profile for level integration into the floor surface Hardly any vibrations noticeable under direct
car or forklift traffic Thermal expansion coefficient similar to resin-based floors Easy to install / Easy to repair Short downtime / Trafficable after 24 h
1 1
2 233
44
5
56
22CONSTRUCTIONRELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
DETAILING SOLUTIONS TO LAST
DETAILS, SUCH AS JOINTS, COVING AND DRAINAGE CONNECTIONS need special attention in order to create a fully functioning protective deck coating system. The connections to different construction elements and components are all too frequently overlooked during the project planning stage.
However these are always crucial areas and where we can often find the root cause of leaks and the result can sometimes be a requirement to re-furbish the whole building. Furthermore during the deck system applica-tion phase, usually towards the end of a building project, the temptation is often there to simplify the proper detailing solutions into something less secure, or even hidden out of sight, and the problems will eventually become apparent at some time in the future.
Investment in detailing solutions in the design office and onsite will be paid back many times over, so always ensure specific design focus and installation time on site for approved detailing solutions.
LIGHT WEAR Sikafloor® JOINT SOLUTION WITH Sikaflex® PRO-3
The information contained herein and any other advice are given in good faith based on Sika's current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Sika's recommendations. The information onlyapplies to the application(s) and product(s) expressly referred to herein and is based on laboratory tests which do not replace practical tests. In case of changes in the parameters of the application, such as changes in substrates etc., or in case of a di�erent application, consult Sika'sTechnical Service prior to using Sika products. The information contained herein does not relieve the user of the products from testing them for the intended application and purpose. All orders are accepted subject to our current terms of sale and delivery. Users must always refer tothe most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.
900_020812_0051C_1708_enAugust 2017
DETAIL FOR FLOORINGLight wear Sikafloor® joint solution with Sikaflex® PRO-3 for car parksTemplate for translation. Internal use only
900_020812_0051C_1708_en
Sika Services AG
Tü�enwies 16
8048 Zürich
Switzerland
Tel: +41 584364040
www.sika.com
Sikafloor® car parkcoating system
Sikaflex® PRO-3 pretreated with Sika® Primer-3 N
Sika® backing rod profile
Compression profile
In case of refurbishment:Sikafloor® epoxy mortar; in case of new build: concrete slab
Concrete slab
In areas where we don’t ex-pect high stress from traffic and we don’t have to protect the structure from water we can use a simple joint solu-tion with Sikaflex® Pro-3 sealant. Often used in combi-nation with Sika® FloorJoint for areas with minor stress.
CONNECTION Sikafloor® CAR PARK COATING SYSTEM TO A DRAIN CHANNEL
The information contained herein and any other advice are given in good faith based on Sika's current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Sika's recommendations. The information onlyapplies to the application(s) and product(s) expressly referred to herein and is based on laboratory tests which do not replace practical tests. In case of changes in the parameters of the application, such as changes in substrates etc., or in case of a di�erent application, consult Sika'sTechnical Service prior to using Sika products. The information contained herein does not relieve the user of the products from testing them for the intended application and purpose. All orders are accepted subject to our current terms of sale and delivery. Users must always refer tothe most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.
Sika Services AG
Tü�enwies 16
8048 Zürich
Switzerland
Tel: +41 584364040
www.sika.com
900_020812_0078C_1708_enAugust 2017
DETAIL FOR FLOORINGConnection Sikafloor® car park coating system to a drain channelTemplate for translation. Internal use only
Sikafloor® seamless car park coating system
In case of refurbishment:Sikafloor® epoxy mortar.In case of new build: concrete slab
Concrete slab
SikaCor® EG-1primer
900_020812_0078C_1708_en
The connection to a drain is the most crucial connection, because water has to flow there and a failure would lead immediately to a leak. Drains with a flange, e.g. ACO® Deckline s100cf, to overcoat with the Sikafloor® car park coating providing a dense connection and therefore security over time.
23CONSTRUCTION
RELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
Sikafloor® COATING SOLUTION FOR A CONNECTION TO A FIXED KERB IN A CAR PARK
The information contained herein and any other advice are given in good faith based on Sika's current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Sika's recommendations. The information onlyapplies to the application(s) and product(s) expressly referred to herein and is based on laboratory tests which do not replace practical tests. In case of changes in the parameters of the application, such as changes in substrates etc., or in case of a di�erent application, consult Sika'sTechnical Service prior to using Sika products. The information contained herein does not relieve the user of the products from testing them for the intended application and purpose. All orders are accepted subject to our current terms of sale and delivery. Users must always refer tothe most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.
Sika Services AG
Tü�enwies 16
8048 Zürich
Switzerland
Tel: +41 584364040
www.sika.com
900_020812_0076C_1708_enAugust 2017
DETAIL FOR FLOORINGSikafloor® coating solution for a connection to a fixed kerb in a car parkTemplate for translation. Internal use only
Concrete slab
Sikafloor® seamless top coat suitable for car parks
Sikafloor® seamless base coat suitable for car parks
Sikafloor® seamless coved skirting
Sikafloor® primer suitable for car parks
30-4
0 m
m
900_020812_0076C_1708_en
With the seamless coved skirting the Sikafloor® top coat can be applied seamless from the floor over the whole kerb. An other variant is to use a different color to bring out the kerb.
Sikafloor® COVING SOLUTION FOR A FLOOR – WALL CONNECTION WITH EXPECTED MOVEMENT
The information contained herein and any other advice are given in good faith based on Sika's current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Sika's recommendations. The information onlyapplies to the application(s) and product(s) expressly referred to herein and is based on laboratory tests which do not replace practical tests. In case of changes in the parameters of the application, such as changes in substrates etc., or in case of a di�erent application, consult Sika'sTechnical Service prior to using Sika products. The information contained herein does not relieve the user of the products from testing them for the intended application and purpose. All orders are accepted subject to our current terms of sale and delivery. Users must always refer tothe most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.
Sika Services AG
Tü�enwies 16
8048 Zürich
Switzerland
Tel: +41 584364040
www.sika.com
900_020812_0077C_1708_enAugust 2017
DETAIL FOR FLOORINGSikafloor® coving solution for a floor – wall connection with expected movementin a car parkTemplate for translation. Internal use only
900_020812_0077C_1708_enConcrete slab
Sikafloor® seamless coved skirting
Sikafloor® primer suitablefor car parks
Sikafloor® seamless base coatsuitable for car parks
Sikafloor® seamless top coat suitablefor car parks
Sikaflex® PRO-3
Foam tape ormasking tape
Concrete wall
Sikagard® WallCoat system (e.g. Sikagard® WallCoat WS-11 includinga suitable plaster to level the wall (total thickness approx. 2-3 mm)
30-4
0 m
m
To connect the Sikafloor® car park coating with a Sikagard® WallCoat often a coved skirt-ing, made of epoxy mortar, is used. It’s easy to clean and the floor – wall connection is protected.
CONNECTION Sikafloor® CAR PARK COATING SYSTEM TO A CONCRETE COLUMN OR STEEL PROFILE WITH EXPECTED MOVEMENT
The information contained herein and any other advice are given in good faith based on Sika's current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Sika's recommendations. The information onlyapplies to the application(s) and product(s) expressly referred to herein and is based on laboratory tests which do not replace practical tests. In case of changes in the parameters of the application, such as changes in substrates etc., or in case of a di�erent application, consult Sika'sTechnical Service prior to using Sika products. The information contained herein does not relieve the user of the products from testing them for the intended application and purpose. All orders are accepted subject to our current terms of sale and delivery. Users must always refer tothe most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.
Sika Services AG
Tü�enwies 16
8048 Zürich
Switzerland
Tel: +41 584364040
www.sika.com
900_020812_0029C_1708_enAugust 2017
DETAIL FOR FLOORINGConnection Sikafloor® car park coating system to a concrete column or steelprofile with expected movementTemplate for translation. Internal use only
Concrete slabSikadur®Combiflex®SG Tape
Concrete column /steel profile
Sikadur®-31 CF
900_020812_0029C_1708_en
Sikafloor® seamless base coatsuitable for car parks
Sikafloor® seamless top coatsuitable for car parks
Sikafloor® primer suitablefor car parks
Sikadur®-31 CF
Connection between two ele-ments, which are subject to movement, can be water-proofed using the Sikadur® Combiflex® System. With its hypalon membrane it ensures durable watertightness.
24CONSTRUCTIONRELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
CORROSION PROTECTION SYSTEMS FOR STEEL PARKING STRUCTURES
CORROSION PROTECTION FOR STEEL PARKING STRUCTURES AND COMPONENTS a durable long-lasting corrosion protection system is required for steel parking structures that is for exposure classified as more severe than just their location. This is due to their open structured design that is open to the elements, plus the aggressive influences of exhaust fumes and possibly automotive fluids, de-icing salts and the vibrations from vehicular traffic.
REQUIREMENTS SikaCor®-EG System Rapid SikaCor®-6630-System
DESIGN / BUILD-UP
Fast curing, even at temperatures below zero High mechanical and chemical resistance Manual or spray application on steel In accordance with DIN EN 12944 Designed for application in paint shops
1-component high build corrosion protection system Easy to apply Suitable for application on steel, galvanised steel and as a maintenance system on less than perfectly derusted surfaces
Designed for application on site
SIKA SYSTEM / PERFORMANCE
Build-up for steel surfaces:Primer: SikaCor®-EG 1 RapidTop coat: SikaCor®-EG 4/5 RapidDFT: approx. 160 µmDurable 2-component corrosion protection system for carbon steel and galvanised steel with high aesthetic finish and UV-resistance.
Build-up for steel surfaces:Primer: SikaCor®-Friazinc R RapidBase coat: SikaCor®-EG 1 RapidTop coat: SikaCor®-EG 4/5 RapidDFT: approx. 240 µm
Build-up for steel surfaces:Primer: SikaCor® 6630 high-solid EGBase coat: SikaCor® 6630 high-solid EGTop coat: SikaCor® 6630 high-solidDFT: approx. 240 µmBuild up for galvanised steel surfaces:Primer: SikaCor® 6630 high-solid EGTop coat: SikaCor® 6630 high-solid EGDFT: approx. 160 µm
Build-up for maintenance:Primer: SikaCor® 6630 PrimerBase coat: SikaCor® 6630 high-solid EGTop coat: SikaCor® 6630 high-solidDFT: approx. 240 µm1-component corrosion protection system for carbon steel, galvanised steel and existing coatings with aesthetic finish and UV-resistance.
Therefore, high performance corrosion protection is impor-tant for both new build and refurbishment of parking struc-tures, where the materials may have to be applied off-site in the paint shop, or on site in the ambient conditions of the location. Similar corrosion protection coatings are necessary for many other steel components as well as the load bearing structure and ancillary equipment for operation, including all of the parapets, barriers and security fencing, plus any com-munication masts and other equipment supports, etc.
It can be difficult to make the right price-performance se-lection of the best optimized corrosion protection coating systems from the numerous ones available in the market, but Sika can guide you through this efficiently. With the SikaCor® and Sika® Permacor® ranges, the right solution is available for every steel coatings application.
Design and aesthetics are also very important, and increas-ingly so for parking structures as discussed elsewhere in this brochure, so the Sika coatings for the corrosion protection can be supplied in almost any color options to meet the architect’s needs.
25CONSTRUCTION
RELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
CAR PARK FIRE PROTECTION SYSTEMS FOR STEEL STRUCTURES
REQUIREMENTS Fire protection for interior steel structures
Fire protection for interior steel structures
Fire protection for exterior steel structures
DESIGN / BUILD-UP
Fire resistance up to 180 minutes
Protects the steel from heat Thick layer application Applicable on steel and concrete
Corrosivity class C1, C2 and C3 acc., ISO EN 12944-2
Fire resistance up to 120 minutes
Forms an insulating foam Thin layer application Does not increase static load Applicable on steel and gal-vanised steel
Corrosivity class C3, C4 and C5 acc., ISO EN 12944-2
Fire resistance up to 120 minutes
2 component high build cor-rosion protection
Easy to apply Applicable on steel and galvanised surfaces
SIKA SYSTEM / PERFORMANCE
Build-up for steel surfaces:
Primer: Sika® Cementitious PrimerFire protection: Sika® Cemetitious Spray Applied Mortar
Please refer to your local Sika of-fice, fire protective, spray applied mortars are offered by various Sika companies, in accordance with the local legislation.
Build-up for steel surfaces:
Intumescent coat:Sika Unitherm® Platinum
Build-up on galvanised steel:Primer: Sika Permacor® 2706 EGIntumescent coat:Sika Unitherm® Platinum
Build-up for steel surfacesand galvanised steel:Primer: Sika® Permacor® 2706 EGIntumescent coat: Sika Unitherm® PlatinumTop coat: SikaCor® EG 5
SIKA SPRAY APPLIED CEMENTITIOUS FIRE PROTECTION MORTARS can provide long term fire resistance up to 3 hours for steel structures.
26CONSTRUCTIONRELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
Sika has over 100 years of experience in providing below ground waterproofing solutions. The selection of the most appropriate waterproofing concept and system for any specific project is dependent on many factors, and it is important to involve a qualified waterproofing specialist at the early stages of design – for both new and refurbishment projects.Underground car parking areas are no longer just utilitarian spaces, where a dark, damp and uninviting environment is acceptable. So once again to ensure the attractive appear-ance and an inviting, useable and saleable environment, the waterproofing of your buildings’ basement is of the utmost importance, and it is also essential for the smooth operation of an underground car park.
This is in addition to the potentially disastrous consequences of damage caused by water ingress that could result in major additional costs during the life cycle of your structure and even significantly reduce its life span. Fortunately Sika has developed secure, proven waterproofing solutions for both new build and refurbishment of underground parking struc-tures.
A FULL RANGE OF SOLUTIONS FOR A WATERTIGHT AND SECURE BUILDING ENVELOPE
Contact your local Sika office for specific solutions for your project.
WATERPROOFING SOLUTIONS FOR UNDERGROUND PARKING STRUCTURES
27CONSTRUCTION
RELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
Reliable watertight sealing of concrete movement, construc-tion and connection joints is essential. These joint sealants do not only “fill the gaps” between concrete elements and other building materials or elements, their functions are much wider and more important. These joint sealants are used primarily to seal and waterproof these different forms of joint, and to con-nect similar or dissimilar elements in a flexible and accommo-dating way. This means that the materials must have excel-lent bonding properties to multiple substrates, maintain this and keep their flexibility for the long-term, whilst all the time being exposed to weathering and the environment of the loca-tion and the nature of the structures. So therefore including wide thermal variations, UV-light and de-icing salts to name just a few. Even after numerous contractions and expan-sions over many years they still have to prevent the ingress of water and aggressive pollutants into the structure. So would you specify and use “any old mastic” for this purpose on your structure – Best Not! The requirements for excellent long term performance of joint sealant materials is obviously dependent on their use and exposure, e.g. type of joint, vertical or horizontal appli-cation, joint movement capability, mechanical and chemical resistance, trafficability, UV-light and color stability. The Sika range of joint sealing solutions is extensive and is designed to meet all of the joint sealing requirements in all types and areas of reinforced concrete parking structures.
In most modern developments reinforced concrete is used to form the foundations and below ground structure includ-ing any retaining walls. Additionally where steel would be too expensive or complex, reinforced concrete is also used for the structural framework of supporting columns, beams and the floor slabs – pretty much the whole of the overall building envelope. The importance of concrete quality and adequate performance specifications for what we know is an aggres-sive environment, wherever the parking structure is located, should not be underestimated. The Sika solutions in this field include state-of-the-art con-crete admixtures which are specifically designed to increase the concrete performance in terms of flow and compaction during placement and then to achieve higher strengths, in-creased watertightness and durability for a long service-life. Sika’s local concrete experts will provide tailored bespoke so-lutions for design architects and engineers of parking struc-tures. They work with their contractors and local concrete producers to create high performance concrete structures, in-cluding special surface effects as key visual design elements.
CAR PARK QUALITY CONCRETE PRODUCTION SOLUTIONS JOINT SEALING SOLUTIONS FOR FACADES AND PRECAST CONCRETE CONNECTIONS
28CONSTRUCTIONRELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
CONCRETE REFURBISHMENT AND PROTECTION SYSTEMS
The prerequisite requirement for a car park flooring system is a sound con-crete support structure and floor slabs. Therefore adequate monitoring and maintenance of the reinforced concrete is essential in order to ensure the de-signed service-life of both the protec-tion systems and the structure itself. This includes:
Protection of the embedded steel reinforcement
Repair and/or replacement of any damaged and deteriorated concrete
Protection of exposed concrete surfaces against mechanical, chemical and physical attack
Strengthening of any areas or elements of the reinforced concrete structure that are unable to safely accommodate the anticipated static and dynamic loading
Successful concrete refurbishment starts with a detailed condition survey and assessment to identify the nature and extent of any damage, together with the root cause(s) of any degrada-tion. It is only after this survey thate assessment, of the appropriate repair and protection strategy and the best options for the repair and future protec-tion works can be defined according to the relevant standards (e.g. European Standards EN 1504).
SIKA SOLUTIONS FOR THE REFURBISHMENT OF PARKING STRUCTURESSika has a full range of well-proven products and systems for all aspects of concrete refurbishment, including many innovative solutions that are ideal for use on parking structures, for example:
Steel reinforcement protection High performance repair mortars Protective water repelling hydropho-
bic impregnations High performance protective and
aesthetic surface coatings Penetrating Corrosion inhibitors Joint sealing and waterproofing
systems Structural strengthening systems
Specific Sika innovations include: repair mortars that can be applied under dy-namic loading, e.g. to soffits whilst the car deck above is in use; plus targeted penetrating inhibitors and impregna-tions to reduce water ingress and active corrosion on embedded steel reinforce-ment e.g. against chloride attack.
29CONSTRUCTION
RELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
For localised, non-structural concrete repair
Example of Sika repair system (R2) Reinforcement corrosion protection
Sika MonoTop®-910 N/S Bonding primer (if necessary) Sika
MonoTop®-910 N/S Repair mortar Sika MonoTop®-211 series Finishing mortar Sika MonoTop®-723 N
CHARACTERISTICS Class R2 repair system according to
European Standard EN 1504-3 One-component system Easy handling and application Accelerated setting for fast repair
works (Sika MonoTop®-211 series) Repair mortar with corrosion inhibi-
tors
Example of Sika repair system (R3) Reinforcement corrosion protection
Sika MonoTop®-910 N/S Bonding primer (if necessary) Sika
MonoTop®-910 N/S Repair mortar Sika MonoTop®-352
series Finishing mortar Sika MonoTop®-723 N
CHARACTERISTICS Class R3 repair system according to
European Standard EN 1504-3 Easy handling and application Higher yield (lightweight repair
mortar) Sulphate resistance Very low shrinkage behavior
(Sika MonoTop®-352 series)
Example of Sika repair system (R4) Reinforcement corrosion protection
SikaTop®-Armatec®-110 EpoCem® Bonding primer (if necessary)
SikaTop®-Armatec®-110 EpoCem® Repair mortar Sika MonoTop®-412
series Finishing mortar Sikagard®-720
EpoCem®
CHARACTERISTICS Class R4 repair system according to
European Standard EN 1504-3 Designed for demanding concrete
repairs For hand and wet spray application Proved for repair work under dynamic
loads Sulphate resistance Very Low shrinkage behavior
(Sika MonoTop®-412 series)
For structural concrete repair
Sika produces a full range of prod-ucts and systems for structural and non-structural concrete repair, which includes reinforcement corrosion pro-tection, bonding primers for difficult substrates, repair mortars with special properties surface smoothing and levelling mortars for finishing and use in specific site conditions e.g. extreme temperatures and moisture content variations etc..
SIKA CONCRETE REPAIR SYSTEMS
For structural concrete repair with demanding requirements
30CONSTRUCTIONRELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
Surface applied corrosion Solution for standard requirements:
Sika® FerroGard®-903 Plus
Hydrophobic impregnations for high protection require-ments:
Sikagard®-706 Thixo Sikagard®- 705 L Sikagard®- 730 Concrete
Protect Plus
Hydrophobic impregnations for moderate protection re-quirements:
Sikagard®-740 W Sikagard®-700 S
CHARACTERISTICS Unique, invisible protec-
tion system for steel bars and concrete surfaces
High cost efficiency Easy to apply
Solution for standard requirements:
Sikagard®-675 W ElastoColor
Solution for high perfor-mance requirements:
Sikagard®-680 S BetonColor
Sikagard®-690 HD W
CHARACTERISTICS Complies with EN 1504-2 Easy to apply Long term durabil-
ity (Sikagard®-680 S & Sikagard®-690 W HD)
Long-time experience
System for moderate crack bridging requirements:
Sikagard®-550 W Elastic
System for high crack bridg-ing requirements:
Sikagard®-545 W Elastofill plus, Sikagard®-550 W Elastic
CHARACTERISTICS Approved for low tempera-
tures down to -20°C Water based system Good crack-bridging
behavior Durable Long-term experience
Solution for high perfor-mance wall coating solution:
Sikagard®-WallCoat WS-11
Waterborne Epoxy based, low emissions, high perfor-mance wall coating solution
Sikagard® Wallcoat N
CHARACTERISTICS Complies with EN 1504-2 Water based epoxy coating Low particle emissions Medium wear resistance Medium chemical
resistance Smooth surface Easy cleaning Color options Low VOC
To prevent further damage to concrete structures due to water ingress, carbonation, chloride or other aggressive chemical influ-ences concrete surfaces have to be protected. Sika produces a full range of surface applied corrosion inhibitors, impregnations, hydrophobic impregnations and specialist rigid or flexible crack-bridging, colored protective coatings, which are designed to pro-vide the necessary protection for reinforced concrete surfaces. This includes all of the structural elements, facades, walls and soffits of parking structures.
SIKA CONCRETE PROTECTION SYSTEMS
Hydrophobic impregnation/ corrosion inhibitor
Rigid protective coating systems
Elastic protective coating systems
Reactive resin protective coating system
31CONSTRUCTION
RELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
SIKA STRUCTURAL STRENGTHENING SYSTEMS
Sika strengthening solutions
Carbon plate system Sikadur®-30 epoxy adhesive plus, Sika® CarboDur® carbon fiber reinforced plates (CFRP)
Post-tensioning system Sikadur®-30 epoxy adhe-sives plus, Sika® CarboStress® (post-tensioning system)
CHARACTERISTICS High tensile strength No corroding Low weight Easy handling Limit deflection and
cracks, increased fatigue resistance (post-tension-ing system)
Sika strengthening solutions
L-shape elements for beams Sikadur®-30 epoxy adhesive plus Sika® CarboShear prefabri-cated L-shape carbon fiber reinforced plates
Fabric system Sikadur®-300/-330 epoxy adhesives plus SikaWrap® fabrics (carbon, glass)
CHARACTERISTICS High tensile strength Unique L-shape system for
reduced on-site labour Low weight No corroding
Sika strengthening solutions
High performance confine-ment system Sikadur®-300/-330 epoxy adhesives plus SikaWrap® fabrics (carbon, glass)
CHARACTERISTICS Adjustable shape Easy application Increase axial capacity of
columns Seismic strengthening
The Sika range provides the full range of carbon fibre reinforced polymer (CFRP) systems, including plates, fabrics, strings, anchors and pre-stressed/post-tensioned systems.
Flexural strengthening Shear strengthening Confinement strengthening
Sika pioneered the development and use of composite systems for structural strengthening, especially with carbon fibre (CFRP) and other fibres with structural epoxy and other resin adhesives. These are now widely used in parking structures for:
Flexural strengthening of beams and slabs
Shear strengthening of beams Increasing the axial, shear and flex-
ural capacity of columns Seismic strengthening
Some of these innovative system char-acteristics and advantages include:
Lightweight, easy to handle and quick to install with minimal downtime or closure
More strength and capacity than traditional steel solutions
Minimal additional volume or weight is added to the structure
Ideal for difficult access areas and overhead application
32CONSTRUCTIONRELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
MEMBRANE WATERPROOFING SYSTEMS FOR PARKING STRUCTURES
SIKA PRODUCES SINGLE-PLY AND LIQUID APPLIED MEMBRANES designed for built-up parking deck and flat roofing systems, as well as thermal insulation and all of the required ancillary materi-als and accessories. More than 50 years of success in this field all around the world has now clearly documented that Sika parking deck and roof waterproofing solutions provide outstanding perfor-mance, with reliable, sustainable, and long-lasting results.
Current demand in the flat roofing seg-ment is driven by the need for eco-friend-ly, energy-saving solutions such as green roof systems, cool roofs, and solar roofs, which can all simultaneously help to re-duce CO2 emissions. Whilst refurbishment projects continue to gain in significance for mature markets such as Europe, emerging markets elsewhere are still moving towards higher quality roofing solutions with complete Sika membrane system solutions. For parking structures, the Sika membrane systems are primarily used to meet the demand for ballasted or green roofs and utility roof decks where the top layer of the system build-up is also designed as a hard-wearing surface for pedestrian and / or vehicular traffic.
The Sika membrane systems are typical-ly installed under concrete slabs, asphalt and Sikafloor® coating systems that are used to provides a secure and very long-lasting solution for useable roof decks.This type of utility roof deck is important on many projects because they can help to:
Create more useable living space and bring additional value to the structure
Generate an increased return on investment by using the roof for a car park, restaurant area or any other commercially viable purpose or facility
Utility roof decks share many features with gravel and green roof ballasted roof deck systems:
The membrane is protected against any aggressive environmental expo-sure and mechanical damage
The natural non-combustible proper-ties of the paved wearing surface contribute significantly to the fire resistance of the roof and the building as a whole roof
LOOSE LAID MEMBRANE SYSTEMS WITH Sikaplan® / Sarnafil®
The Sikaplan® / Sarnafil® single ply membranes are loose laid on the substrate, welded together and then ballasted with the required utility deck build-up and wearing surface
These Sikaplan® / Sarnafil® systems have a proven track record of over 30 years
Sikaplan® / Sarnafil® membranes for utility roof decks easily resist biologi-cal influences and microorganisms attacks
These flexible membranes can be installed in most weather conditions, even at minus temperatures
No additional fastening is required and no invasive penetration of the roof deck is needed
LIQUID APPLIED ROOF DECK MEM-BRANE SYSTEMS WITH Sikalastic®Utility roof decks can also be water-proofed easily and securely with Sikalastic® liquid applied membrane systems that provides another unique range of solutions for utility roof decks:
Sikalastic® top deck wearing surface layers can be used with added quartz sand and / or colored chips to give almost unlimited design possibilities for pedestrian terraces.
Specific 2-C Sikalastic® products can be overlaid directly with hot poured asphalt, which can be a very cost effective solution to allow vehicular traffic access or provide additionally car parking areas
All of the main advantages of liquid ap-plied roofing membranes are also valid for utility roof decks:
Cold applied waterproofing – no flames and no heating or welding required
Seamless waterproofing, fully bonded to the substrate – preventing lateral water underflow
The SikaRoof® MTC waterproofing layer is moisture and rain resistant just 10 minutes after application
Most systems comprise 1-C products with a viscosity that is ideal for roofing applications (no need for any additional thinners or hardeners etc.)
Easy installation with brushes and rollers even for complex surface shapes and detailing
High tensile strength and crack bridging elasticity
Long shelf life products
33CONSTRUCTION
RELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
DECK COATING SYSTEMS MAINTENANCE INSTRUCTIONS
As covered elsewhere in this brochure, the deck waterproofing coatings for multi-storey car parks are exposed to many different thermal, mechanical and chemical stresses. The coating sys-tem must protect the concrete surface not only from potentially aggressive and damaging media such as water, chlorides, fuels, oils and battery acids, but also against the heavy mechanical loads and abrasive wear through being repeatedly driven over.
Also as mentioned previously there are increasingly high requirements for the parking decks appearance and aesthet-ics as well as their durability, which all have to be fulfilled. The regular care and maintenance of the coated deck surface is therefore also important to help preserve value and also to ensure the required long service-life. Addition-
ally, and especially in the cold and wet winter season, the adequate slip and skid resistance of the floor of the car park becomes a very important criteria, so the normal build-up of dust, dirt and pollutants must be frequently removed.
The intensity and the frequency of the cleaning regime and its intervals depends very much on the specific car park, its function, level of external exposure and weather conditions, the frequency of use, and the condition of the deck coating surfaces themselves.
The decision of whether each individual multi-storey car park must be cleaned daily, weekly, monthly or annually, can only be specified by the owners and their requirements, but it is recom-mended that these must all be made very clear to the operator to ensure
compliance. Generally the optimal clean-ing regime can only be set up after a certain trial period for a full evaluation of the frequency required, the most ap-propriate cleaning machines, the right cleaning chemicals and procedures.
The selection of the right machines depends on the extent of the surfaces which have to be maintained and the spatial conditions (e.g. access and equipment storage heights, floor and slope/ramp gradients etc.). Therefore it is always best to seek advice from your local specialist floor cleaning companies or manufacturers of cleaning agents or/and equipment. Your local Sika office will be able to assist you with advice in this respect also as part of our compre-hensive customer service.
34CONSTRUCTIONRELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
WE PROVIDE INTEGRATED, FULLY COMPATIBLE SYSTEMS AND PRODUCTS for all of your various new build and refurbishment projects, from the basement to the roof, for buildings and civil engineering structures worldwide. Scan the QR code below to open our SikaSmart City – An online selection guide to find expert mate-rial solutions and references.
SOLUTIONS FOR YOUR PROJECT IN A FEW CLICKS
STEP 1: Select the project type in the SikaSmart city
35CONSTRUCTION
RELIABLE AND DURABLE SOLUTION FOR PARKING STRUCTURES
Please always visit your local Sika website to get your local solutions or contact our local sales and technical department to analyze your project situation and give you direct expert advice. Each project has its own requirements, and Sika’s experienced engineers can help you make the right decision among the options.
ADDED VALUES FOR YOU: Standard or tailored CAD and 3D detailing drawings
Standard or tailored BIM objects Onsite inspection and investigation Life cycle cost evaluation and comparison
STEP 4: Review the search resultsYou will land on pages listing the corresponding Sika systems as options for the application you need. Here are some examples of such systems.
STEP 3: Select the application
STEP 2: Select the building element
Our most current General Sales Conditions shall apply. Please consult the most current local Product Data Sheet prior to any use.
© S
IKA
SER
VIC
ES A
G /
CON
STR
UCT
ION
/ C
MD
L /
REL
IAB
LE A
ND
DU
RA
BLE
SO
LUTI
ON
S FO
R P
AR
KIN
G S
TRU
CTU
RES
/ 1
0. 2
017
/ ID
: 795
64
SIKA SERVICES AGTueffenwies 16CH-8048 ZurichSwitzerland
ContactPhone +41 58 436 40 40www.sika.ch
FOR MORE SIKA FLOORING INFORMATION:
ALSO AVAILABLE FROM SIKA
WE ARE SIKASika is a specialty chemicals company with a leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing and protecting in the building sector and the motor vehicle industry. Sika’s product lines feature concrete admix-tures, mortars, sealants and adhesives, structural strengthening sys-tems, industrial flooring as well as roofing and waterproofing systems.