Release 1 LMT40107 Certificate IV in Textile Technology and Production

download Release 1 LMT40107 Certificate IV in Textile Technology and Production

of 20

Transcript of Release 1 LMT40107 Certificate IV in Textile Technology and Production

  • 8/6/2019 Release 1 LMT40107 Certificate IV in Textile Technology and Production

    1/20

    LMT40107 Certificate IV in TextileTechnology and Production

    Revision Number: 1

  • 8/6/2019 Release 1 LMT40107 Certificate IV in Textile Technology and Production

    2/20

    LMT40107 Certificate IV in Textile Technology and Production

    Modification History

    Not applicable.

    Description

    Job roles/employment outcomesThe Certificate IV in Textile Technology and Production covers occupations such as thosein technical support or production management roles within the textilesindustry, with functions such as product design assistance, computer aided design andmanufacturing technologies, colour coordination, production planning, quality

    control, technical support and problem solving. This qualification also covers a broad range ofskilled applications, including evaluation and analysis of current practices, development ofnew criteria and procedures for performing current practice and provision of leadership andguidance to others.

    ApplicationThis qualification is typically used to develop skill and knowledge in the application ofspecialised technical and management skills within textile production enterprises.

    Pathways into the qualificationDirect entry into this qualification requires completion of a total of twenty-five (25) units of

    competency according to the rules described below.

    Credit may be granted towards this qualification by those who have completed LMT30107Certificate III in Textile Production, LMT30407 Textile Fabrication, LMT31807 TechnicalTextiles and Non-wovens or achieved equivalent industry experience.

    Pathways from the qualificationFurther training pathways from this qualification include LMT50407 Diploma of TextileTechnology and Production Management, MSA51108 Diploma of CompetitiveManufacturing or other relevant manufacturing qualifications.

    Licensing considerationsThere are no specific licences that relate to this qualification. However, some units in thisqualification may have licensing or regulatory requirements in some environments. Localregulations should be checked for details.

    Pathways Information

    Not applicable.

    LMT40107Certificate IVinTextileTechnologyandProductionDatethisdocumentwasgenerated:13/08/11

    ApprovedPage2 of20

    Commonwealth ofAust

    ralia,8/13/11ManufacturingSkillsAustralia

  • 8/6/2019 Release 1 LMT40107 Certificate IV in Textile Technology and Production

    3/20

    Licensing/Regulatory Information

    Not applicable.

    Entry Requirements

    Not applicable.

    Employability Skills Summary

    EMPLOYABILITY SKILLS QUALIFICATION SUMMARY

    Employability Skills Summary - Certificate IV in Textile Technology andProductionThe following table contains a summary of the Employability Skills as identified by the textiletechnology and production industries for this qualification. This table should be interpreted inconjunction with the detailed requirements of each unit of competency packaged in thisqualification. The outcomes described here are broad industry requirements that reflect skillrequirements for this level.

    Employability Skill Industry/enterprise requirements for this qualificationinclude:

    Communication complete workplace documentation and records use communication technologies efficiently develop work instructions, specifications and

    procedures for production demonstrate effective and appropriate communication

    and interpersonal skills when dealing with people fromnesb

    communicate with all team members demonstrate effective and appropriate communication

    and interpersonal skills when dealing with clients use most appropriate communication method given

    priority, cost and customer facilities access, interpret and apply technical information interpret and apply textile calculations and

    specifications

    interpret production data

    Teamwork work cooperatively with people of different ages,

    gender, race or religion liaise with and provide support to other team members work as part of a team identify and manage performance required to meet

    customer needs in own work and team manage technical processes and provide problem

    solving support to others participate in sustainability improvements

    Problem-solving investigate problem causes

    identify, rectify or report potential difficulties

    LMT40107Certificate IVinTextileTechnologyandProductionDatethisdocumentwasgenerated:13/08/11

    ApprovedPage3 of20

    Commonwealth ofAust

    ralia,8/13/11ManufacturingSkillsAustralia

  • 8/6/2019 Release 1 LMT40107 Certificate IV in Textile Technology and Production

    4/20

    EMPLOYABILITY SKILLS QUALIFICATION SUMMARY

    associated with manufacture of products orprovision of services

    identify and act on environmental hazards use material and process knowledge to solve

    problems identify hazards and implement control measures determine production requirements apply information on textile sciences to

    determine solutions to production or designproblems

    conduct tests and analyse results to determineand assess production requirements

    Initiative and enterprise seek feedback on products, processes and

    procedures gather and analyse information and apply to

    production processes record information on the quality and other indicators

    of products determine types and quantities of materials required

    for manufacture support achievement of efficient production processes determine and act on situations requiring further

    information or problem solving identify opportunities for improvements to

    environmental performance

    Planning and organising identify hazards and implement appropriate hazard

    control measures demonstrate time management skills source and prepare materials and resources for

    production identify and rectify stock shortages in advance sequence work to maximise safety and productivity interpret production requirements for textile designs

    Self-management interpret and apply relevant acts and regulations keep the work area clean and tidy at all times monitor own work and work of team and identify and

    act on any quality issues monitor use of resources understand own work activities manage own time to meet deadlines implement workplace procedures and instructions

    Learning implement learning activities as appropriate to ensure

    achievement of specified production requirements assess competencies in meeting job requirements be supportive, assertive and use interpersonal skills identify own training needs and seek skill

    development if required learn about sustainability developments relating to

    LMT40107Certificate IVinTextileTechnologyandProductionDatethisdocumentwasgenerated:13/08/11

    ApprovedPage4 of20

    Commonwealth ofAust

    ralia,8/13/11ManufacturingSkillsAustralia

  • 8/6/2019 Release 1 LMT40107 Certificate IV in Textile Technology and Production

    5/20

    EMPLOYABILITY SKILLS QUALIFICATION SUMMARY

    work practice gather feedback to own work to assess

    effectiveness in meeting objectives and integrateinformation into own practice

    Technology ensure textile production equipment is operated

    and maintained efficiently and according toworkplace standards

    use computer software applications effectively work with technology safely and according to

    workplace standards help others use textile technology efficiently and

    safely use testing technology

    Packaging RulesPackaging Rules

    To be awarded the Certificate IV in Textile Technology and Production, competency must beachieved in twenty-five (25) units of competency.

    Eleven (11) core units of competency Fourteen (14) elective units of competency as specified below.

    Note: Where prerequisite units apply, these have been noted, and must be considered in thetotal number of units.

    CORE UNITS

    Complete all eleven (11) units from this list

    Unit code Unit title

    LMTGN2003B Work in the Textiles, Clothing and Footwear industry

    LMTGN3002B Organise and plan own work to achieve plannedoutcomes

    LMTGN4010A Implement and monitor OH&S in the workplace

    LMTGN4011A Coordinate quality system and procedures

    LMTGN4013A Manage technical processes

    LMTTX2001B Identify fibres, yarns and textile materials and their uses

    in textile production

    LMT40107Certificate IVinTextileTechnologyandProductionDatethisdocumentwasgenerated:13/08/11

    ApprovedPage5 of20

    Commonwealth ofAust

    ralia,8/13/11ManufacturingSkillsAustralia

  • 8/6/2019 Release 1 LMT40107 Certificate IV in Textile Technology and Production

    6/20

    Unit code Unit title

    LMTTX3001B Identify quality and types of textile fibres, yarns andfabrics

    LMTTX4001A Interpret and apply textile calculations andspecifications

    LMTTX4002A Understand and apply textile science

    LMTTX4003A Perform routine textile testing and analyse results

    MSAENV272B Participate in environmentally sustainable workpractices

    ELECTIVE UNITS

    Select fourteen (14) units as specified below.

    A minimum of four (4) units must be selected from Group A A maximum of four (4) units may be selected from Group B A maximum of four (4) units may be selected from Group D A maximum of four (4) units may be selected from Group E The remainder must be selected from Groups A and C.

    NOTE: Competitive Manufacturing Training Package units, identified in Group D asMSACM coded units, should be selected on the basis of work requirements. Those atCertificate II level (units in the 200 series) are appropriate for operators. MSACM units forthose in Certificate III level positions such as team leaders should be selected from both the200 series and the 400 series.

    GROUP A

    Unit code Unit title Prerequisites

    LMTGN4001A Coordinate or set upmachine/s for productchange

    LMTGN4002A Participate in productengineering

    LMTGN4003A Install and commissionprocess and machinecontrol programs

    LMTGN4005A Plan and implement

    production within a work

    LMT40107Certificate IVinTextileTechnologyandProductionDatethisdocumentwasgenerated:13/08/11

    ApprovedPage6 of20

    Commonwealth ofAust

    ralia,8/13/11ManufacturingSkillsAustralia

  • 8/6/2019 Release 1 LMT40107 Certificate IV in Textile Technology and Production

    7/20

    Unit code Unit title Prerequisites

    area

    LMTGN4006A Evaluate equipmentand systems

    LMTGN4008A Analyse product anddetermine machinesettings

    LMTGN4009A Set and modifymachines for productchange

    LMTGN4012A Fabricate or machinetooling

    LMTGN4014A Design production tooling

    LMTGN4016A Contribute to thedevelopment of productsor processes

    LMTTX4004A Select dyes and developdye specification andrecipe for production

    LMTTX4005A Undertake textilecolouration and finishing

    LMTTX4002A

    GROUP B

    Unit code Unit title Prerequisites

    LMTCL2001B Use a sewing machine

    LMTGN2009B Operate computingtechnology in a TextileClothing and Footwearworkplace

    LMTGN3001B Control production in asection of a TextileClothing and Footwearenterprise

    LMTGN3005B Plan tasks to assist

    LMT40107Certificate IVinTextileTechnologyandProductionDatethisdocumentwasgenerated:13/08/11

    ApprovedPage7 of20

    Commonwealth ofAust

    ralia,8/13/11ManufacturingSkillsAustralia

  • 8/6/2019 Release 1 LMT40107 Certificate IV in Textile Technology and Production

    8/20

    Unit code Unit title Prerequisites

    productionoperations

    LMTGN3006B Take responsibilityfor visitors and newemployees

    LMTGN3009B Supervise operationsin a textiles, clothingand footwearenterprise

    LMTLG2006A Identify materials

    used in leather goodsproduction

    LMTLG3001A Make a prototype

    LMTTF2001A Despatch products

    LMTTF2003A Package and handleproducts for despatch

    LMTTF2004A Add reinforcements andattachments

    LMTTF2005A Translate information intomeasurements ordiagrams

    LMTTF2006A Measure and scalegeometric shapes

    LMTTF2005A

    LMTTF2007A Produce patterns for 2Dproducts

    LMTTF2008A Use adhesives

    LMTTF2009A Identify and select canvasand sail materials

    LMTTF2010A Lay out and mark outcanvas or sail materials

    LMTTF2011A Cut and shape canvas orsail materials

    LMTTF2012A Stitch by hand

    LMT40107Certificate IVinTextileTechnologyandProductionDatethisdocumentwasgenerated:13/08/11

    ApprovedPage8 of20

    Commonwealth ofAust

    ralia,8/13/11ManufacturingSkillsAustralia

  • 8/6/2019 Release 1 LMT40107 Certificate IV in Textile Technology and Production

    9/20

    Unit code Unit title Prerequisites

    LMTTF2013A Waterproof canvasproduct

    LMTTF2014A Weld plasticmaterials

    LMTTF2016A Install products onand off-site

    LMTTF2017A Cut, bend and shapemetal

    LMTTF2018A Use canvas and sail

    production tools

    LMTTF2019A Inspect canvas or sailproduct

    LMTTF3001A Identify customerrequirements (on site)

    LMTTF3002A Gain customer acceptanceof service proposal

    LMTTF3003A Produce patterns for 3Dproducts

    LMTTF2007A

    LMTTF3004A Perform advancedwelding of plasticmaterials

    LMTTF2014A

    LMTTF3005A Apply lofting skills to sailmaking

    LMTTF3006A Cut and join sail panels

    LMTTN2001B Set up and operate a drylaid web formingmachine

    LMTTN2002B Set up and operate a spunbond web formingmachine

    LMTTN2003B Use basic recognitiontechniques to identifytechnical and nonwoven

    textiles

    LMT40107Certificate IVinTextileTechnologyandProductionDatethisdocumentwasgenerated:13/08/11

    ApprovedPage9 of20

    Commonwealth ofAust

    ralia,8/13/11ManufacturingSkillsAustralia

  • 8/6/2019 Release 1 LMT40107 Certificate IV in Textile Technology and Production

    10/20

    Unit code Unit title Prerequisites

    LMTTN2004B Undertake webbonding processes

    LMTTN2005B Undertake webconversion andfinishing

    LMTTN2006B Identify purpose andperformanceoutcomes oftechnical textile

    product

    LMTTN2003B

    LMTTN2007B Conduct technical textilemechanical finishing

    processes

    LMTTN2008B Conduct heat setting ontechnical textiles

    LMTTN2009B Apply surface coating totechnical textiles

    LMTTN2010B Apply laminations andfusible interlinings totechnical textiles

    LMTTN2011B Undertake fibre blendingand feeding fornonwoven technical

    production processes

    LMTTX2002B Prepare yarn for textilemanufacturing

    LMTTX2003B Perform spinning

    operations

    LMTTX2004B Perform tuftingoperations

    LMTTX2005B Perform creelingoperations

    LMTTX2006B Operate a weaving loom

    LMTTX2007B Perform knitting

    operations

    LMT40107Certificate IVinTextileTechnologyandProductionDatethisdocumentwasgenerated:13/08/11

    ApprovedPage10of20

    Commonwealth ofAust

    ralia,8/13/11ManufacturingSkillsAustralia

  • 8/6/2019 Release 1 LMT40107 Certificate IV in Textile Technology and Production

    11/20

    Unit code Unit title Prerequisites

    LMTTX2008B Apply finishingprocesses to textile

    production

    LMTTX2009B Weigh and checktextile materials and

    products

    LMTTX2010B Load and operatedyeing equipment

    LMTTX2011B Repair textileproduct

    LMTTX2012B Perform industrial sewingon textile products

    LMTTX2013B Conduct packaging orfolding for textile

    production

    LMTTX2014B Use specialisedmachinery to assist textile

    production

    LMTTX2015B Handle and preparechemicals, dyes and othersubstances used in textile

    production

    LMTTX2016B Perform knotting forweaving operations

    LMTTX2017B Access and useinformation resources fortextile production

    operations

    LMTTX2018B Restart machine afterstoppage

    LMTTX2019B Undertake cardingoperations

    LMTTX3002B Contribute to textileproduction processimprovements

    LMTGN2002B

    LMT40107Certificate IVinTextileTechnologyandProductionDatethisdocumentwasgenerated:13/08/11

    ApprovedPage11of20

    Commonwealth ofAust

    ralia,8/13/11ManufacturingSkillsAustralia

  • 8/6/2019 Release 1 LMT40107 Certificate IV in Textile Technology and Production

    12/20

    Unit code Unit title Prerequisites

    LMTTX3004B Set up textileproduction machines

    for product change

    LMTTX3005B Organise andinterpret tests

    LMTTX3006B Ensure efficientoperation of textilemachines

    LMTTX3007B Prepare dyes fortextile production

    LMTTX3008B Select raw materials

    LMTTX3009B Operate in a complextextile productionenvironment

    LMTTX3010B Monitor textileproduction processes

    LMTTX3011A Set up, adjust andmaintain circular knittingmachines

    LMTTX3012A Set up, adjust andmaintain flat knittingmachines

    LMTTX3013A Set up and adjustspinning machines

    LMTTX3014A Set up, adjust andmaintain carding

    machines

    LMTTX3001B

    LMTTX3015A Set up, adjust andmaintain tufting machines

    LMTTX4002A

    LMTTX3016A Set up, adjust andmaintain domestic sewingmachines

    LMTTX3017A Set up, adjust andmaintain industrial

    sewing machines

    LMT40107Certificate IVinTextileTechnologyandProductionDatethisdocumentwasgenerated:13/08/11

    ApprovedPage12of20

    Commonwealth ofAust

    ralia,8/13/11ManufacturingSkillsAustralia

  • 8/6/2019 Release 1 LMT40107 Certificate IV in Textile Technology and Production

    13/20

    Unit code Unit title Prerequisites

    LMTTX3018A Undertake electronicfault finding on

    textile machinery

    LMTTX3019A Identify and correctmechanical faults inloom and otherweaving equipment

    LMTTX3020A Identify and correctweaving processfaults

    LMTTX3021A Apply knowledge ofweaving processes to

    production requirements

    LMTTX3022A Set up and operateweaving loom for

    production

    GROUP C

    Unit code Unit title Prerequisites

    MEM12023A Perform engineeringmeasurements

    MEM12024A Performcomputations

    MEM13003B Work safely withindustrial chemicalsand materials

    MEM14004A Plan to undertake aroutine task

    MEM14005A Plan a completeactivity

    MEM17003A Assist in theprovision of on thejob training

    PMASUP420B Minimise

    environmental

    LMT40107Certificate IVinTextileTechnologyandProductionDatethisdocumentwasgenerated:13/08/11

    ApprovedPage13of20

    Commonwealth ofAust

    ralia,8/13/11ManufacturingSkillsAustralia

  • 8/6/2019 Release 1 LMT40107 Certificate IV in Textile Technology and Production

    14/20

    Unit code Unit title Prerequisites

    impact ofprocess

    GROUP D

    Unit code Unit title Prerequisites

    MSACMC210A Manage theimpact ofchange on ownwork

    MSACMC410A Lead change in amanufacturingenvironment

    MSACMS200A Apply competitivemanufacturing

    practices

    MSACMS201A Sustain processimprovements

    MSACMS400A Implement acompetitivemanufacturingsystem

    MSACMS401A Ensure processimprovements aresustained

    MSACMT220A Apply quickchangeover

    procedures

    MSACMT221A Apply Just in Time(JIT) procedures

    MSACMT230A Apply cost factorsto work practices

    MSACMT231A Interpret productcosts in terms ofcustomerrequirements

    LMT40107Certificate IVinTextileTechnologyandProductionDatethisdocumentwasgenerated:13/08/11

    ApprovedPage14of20

    Commonwealth ofAust

    ralia,8/13/11ManufacturingSkillsAustralia

  • 8/6/2019 Release 1 LMT40107 Certificate IV in Textile Technology and Production

    15/20

    Unit code Unit title Prerequisites

    MSACMT240A Apply 5Sprocedures in a

    manufacturingenvironment

    MSACMT250A Monitor processcapability

    MSACMT260A Use planningsoftwaresystems inmanufacturing

    MSACMT261A Use SCADAsystems inmanufacturing

    MSACMT270A Use sustainableenergy practices

    MSACMT280A Undertake rootcause analysis

    MSACMT281A Contribute to theapplication of a

    proactivemaintenancestrategy

    MSACMT421A Facilitate a Just inTime (JIT) system

    MSACMT430A Improve cost factorsin work practices

    MSACMT432A Analyse manualhandling processes

    MSACMT440A Lead 5S in amanufacturingenvironment

    MSACMT450A Undertake processcapabilityimprovements

    MSACMT452A

    MSACMT451A Mistake proof a

    LMT40107Certificate IVinTextileTechnologyandProductionDatethisdocumentwasgenerated:13/08/11

    ApprovedPage15of20

    Commonwealth ofAust

    ralia,8/13/11ManufacturingSkillsAustralia

  • 8/6/2019 Release 1 LMT40107 Certificate IV in Textile Technology and Production

    16/20

    Unit code Unit title Prerequisites

    productionprocess

    MSACMT452A Apply statisticsto processes inmanufacturing

    MSACMT460A Facilitate theuse of planningsoftwaresystems inmanufacturing

    MSACMT260A

    MSACMT461A Facilitate SCADAsystems in amanufacturing teamor work area

    MSACMT261A

    MSACMT481A Undertake proactivemaintenanceanalyses

    MSACMT482A Assist inimplementing a

    proactivemaintenancestrategy

    MSAENV472B Implement andmonitorenvironmentallysustainable work

    practices

    GROUP E

    Other Textile Technology and Production units that are available at Certificates IV(maximum 4) or V (maximum 1)

    Other TCF Training Package units that are available at Certificates III (maximum 1),IV (maximum 4) and V (maximum 1)

    Units from other endorsed Training Packages and accredited courses at Certificates III(maximum 1), IV (maximum 4) and V (maximum 1)

    LMT40107Certificate IVinTextileTechnologyandProductionDatethisdocumentwasgenerated:13/08/11

    ApprovedPage16of20

    Commonwealth ofAust

    ralia,8/13/11ManufacturingSkillsAustralia

  • 8/6/2019 Release 1 LMT40107 Certificate IV in Textile Technology and Production

    17/20

    Unit GridLMTCL2001B Use a sewing machineLMTGN2002B Apply quality standardsLMTGN2003B Work in the Textiles, Clothing and Footwear industryLMTGN2009B Operate computing technology in a textiles, clothing andfootwear workplaceLMTGN3001B Control production in a section of a textiles, clothing and footwearenterpriseLMTGN3002B Organise and plan own work to achieve planned outcomesLMTGN3005B Plan tasks to assist production operationsLMTGN3006B Take responsibility for visitors and new employeesLMTGN3009B Supervise operations in a textiles, clothing and footwear enterpriseLMTGN4001A Coordinate or set up machines for product changeLMTGN4002A Participate in product engineeringLMTGN4003A Install and commission process and machine control programsLMTGN4005A Plan and implement production within a work areaLMTGN4006A Evaluate equipment and systemsLMTGN4008A Analyse product and determine machine settingsLMTGN4009A Set and modify machines for product changeLMTGN4010A Implement and monitor OHS in the workplaceLMTGN4011A Coordinate the quality system and proceduresLMTGN4012A Fabricate or machine toolingLMTGN4013A Manage technical processes

    LMTGN4014A Design production toolingLMTGN4016A Contribute to the development of products or processesLMTLG2006A Identify materials used in leather goods productionLMTLG3001A Make a prototypeLMTTF2001A Despatch productsLMTTF2003A Package and handle products for despatchLMTTF2004A Add reinforcements and attachmentsLMTTF2005A Translate information into measurements or diagramsLMTTF2006A Measure and scale geometric shapesLMTTF2007A Produce patterns for 2D productsLMTTF2008A Use adhesives

    LMTTF2009A Identify and select canvas and sail materialsLMTTF2010A Lay out and mark out canvas or sail materialsLMTTF2011A Cut and shape canvas or sail materialsLMTTF2012A Stitch by handLMTTF2013A Waterproof canvas productsLMTTF2014A Weld plastic materialsLMTTF2016A Install products on and off siteLMTTF2017A Cut, bend and shape metalLMTTF2018A Use canvas and sail production toolsLMTTF2019A Inspect canvas or sail productLMTTF3001A Identify customer requirements (on site)

    LMTTF3002A Gain customer acceptance of service proposal

    LMT40107Certificate IVinTextileTechnologyandProductionDatethisdocumentwasgenerated:13/08/11

    ApprovedPage17of20

    Commonwealth ofAust

    ralia,8/13/11ManufacturingSkillsAustralia

  • 8/6/2019 Release 1 LMT40107 Certificate IV in Textile Technology and Production

    18/20

    LMTTF3003A Produce patterns for 3D productsLMTTF3004A Perform advanced welding of plastic materialsLMTTF3005A Apply lofting skills to sail makingLMTTF3006A Cut and join sail panels

    LMTTN2001B Set up and operate a dry laid web forming machineLMTTN2002B Set up and operate a spun bond web forming machineLMTTN2003B Use basic recognition techniques to identify technical and non-woven textilesLMTTN2004B Undertake web bonding processesLMTTN2005B Undertake web conversion and finishingLMTTN2006B Identify purpose and performance outcomes of technical textile

    productLMTTN2007B Conduct technical textile mechanical finishing processesLMTTN2008B Conduct heat setting on technical textilesLMTTN2009B Apply surface coating to technical textiles

    LMTTN2010B Apply laminations and fusible interlinings to technical textilesLMTTN2011B Undertake fibre blending and feeding for nonwoven technical productionprocessesLMTTX2001B Identify fibres, yarns and textile materials and their uses in textile productionLMTTX2002B Prepare yarn for textile manufacturingLMTTX2003B Perform spinning operationsLMTTX2004B Perform tufting operationsLMTTX2005B Perform creeling operationsLMTTX2006B Operate a weaving loomLMTTX2007B Perform knitting operationsLMTTX2008B Apply finishing processes to textile productionLMTTX2009B Weigh and check textile materials and productsLMTTX2010B Load and operate dyeing equipmentLMTTX2011B Repair textile productLMTTX2012B Perform industrial sewing on textile productsLMTTX2013B Conduct packaging or folding for textile productionLMTTX2014B Use specialised machinery to assist textile productionLMTTX2015B Handle and prepare chemicals, dyes and other substances used in textile

    productionLMTTX2016B Perform knotting for weaving operationsLMTTX2017B Access and use information resources for textile production operationsLMTTX2018B Restart machine after stoppageLMTTX2019B Undertake carding operations

    LMTTX3001B Identify quality and types of textile fibres, yarns and fabricsLMTTX3002B Contribute to textile production process improvementsLMTTX3004B Set up textile production machines for product changeLMTTX3005B Organise and interpret testsLMTTX3006B Ensure efficient operation of textile machinesLMTTX3007B Prepare dyes for textile productionLMTTX3008B Select raw materialsLMTTX3009B Operate in a complex textile production environmentLMTTX3010B Monitor textile production processes

    LMT40107Certificate IVinTextileTechnologyandProductionDatethisdocumentwasgenerated:13/08/11

    ApprovedPage18of20

    Commonwealth ofAust

    ralia,8/13/11ManufacturingSkillsAustralia

  • 8/6/2019 Release 1 LMT40107 Certificate IV in Textile Technology and Production

    19/20

    LMTTX3011A Set up, adjust and maintain circular knitting machinesLMTTX3012A Set up, adjust and maintain flat knitting machinesLMTTX3013A Set up, adjust and maintain spinning machinesLMTTX3014A Set up, adjust and maintain carding machines

    LMTTX3015A Set up, adjust and maintain tufting loomsLMTTX3016A Set up, adjust and maintain domestic sewing machinesLMTTX3017A Set up, adjust and maintain industrial sewing machinesLMTTX3018A Undertake electronic fault finding on textile machineryLMTTX3019A Identify and correct mechanical faults in loom and other weavingequipmentLMTTX3020A Identify and correct weaving process faultsLMTTX3021A Apply knowledge of weaving processes to productionrequirementsLMTTX3022A Set up and operate weaving looms for productionLMTTX4001A Interpret and apply textile calculations and specifications

    LMTTX4002A Understand and apply textile scienceLMTTX4003A Perform routine textile testing and analyse resultsLMTTX4004A Select dyes and develop dye specification and recipe for productionLMTTX4005A Undertake textile colouration and finishingMEM12023A Perform engineering measurementsMEM12024A Perform computationsMEM13003B Work safely with industrial chemicalsMEM14004A Plan to undertake a routine taskMEM14005A Plan a complete activityMEM17003A Assist in the provision of on the job trainingMSACMC210A Manage the impact of change on own workMSACMC410A Lead change in a manufacturing environmentMSACMS200A Apply competitive manufacturing practicesMSACMS201A Sustain process improvementsMSACMS400A Implement a competitive manufacturing systemMSACMS401A Ensure process improvements are sustainedMSACMT220A Apply quick changeover proceduresMSACMT221A Apply Just in Time (JIT) proceduresMSACMT230A Apply cost factors to work practicesMSACMT231A Interpret product costs in terms of customer requirementsMSACMT240A Apply 5S procedures in a manufacturing environmentMSACMT250A Monitor process capabilityMSACMT260A Use planning software systems in manufacturing

    MSACMT261A Use SCADA systems in manufacturingMSACMT270A Use sustainable energy practicesMSACMT280A Undertake root cause analysis

    LMT40107Certificate IVinTextileTechnologyandProductionDatethisdocumentwasgenerated:13/08/11

    ApprovedPage19of20

    Commonwealth ofAust

    ralia,8/13/11ManufacturingSkillsAustralia

  • 8/6/2019 Release 1 LMT40107 Certificate IV in Textile Technology and Production

    20/20

    MSACMT281A Contribute to the application of a proactive maintenancestrategyMSACMT421A Facilitate a Just in Time (JIT) systemMSACMT430A Improve cost factors in work practices

    MSACMT432A Analyse manual handling processesMSACMT440A Lead 5S in a manufacturing environmentMSACMT450A Undertake process capability improvementsMSACMT451A Mistake proof a production processMSACMT452A Apply statistics to processes in manufacturingMSACMT460A Facilitate the use of planning software systems in manufacturingMSACMT461A Facilitate SCADA systems in a manufacturing team or work areaMSACMT481A Undertake proactive maintenance analysesMSACMT482A Assist in implementing a proactive maintenance strategyMSAENV272B Participate in environmentally sustainable work practicesMSAENV472B Implement and monitor environmentally sustainable work practices

    PMASUP420B Minimise environmental impact of process

    LMT40107Certificate IVinTextileTechnologyandProductionDatethisdocumentwasgenerated:13/08/11

    ApprovedPage20of20

    Commonwealth ofAust

    ralia,8/13/11Manufacturin