Reinforcing Guide 2013
-
Upload
andrew-silcox -
Category
Documents
-
view
235 -
download
0
description
Transcript of Reinforcing Guide 2013
REINFORCINGProduct Guide
BlueScope Distribution operates from more than 50 metropolitan and
regional sites around Australia to offer a diverse range of steel products
to industries including resources, transportation, automotive, construction,
infrastructure and agriculture.
www.bluescopedistribution.com.au
BlueScope Pipeline Supplies offers a wide range of steel pipe and
fittings to service mining, fire and mechanical, utilities and rural industry
customers throughout Australasia.
www.bluescopepipelinesupplies.com.au
BlueScope Steel - Sheet Metal Supplies offers a diverse range of sheet
and coil steel products, comprising galvanised, zinc coated, aluminium
zinc coated, hot rolled, cold rolled, pre-painted, aluminised, COLORBOND®
steel and ZINCALUME® steel.
www.sheetmetalsupplies.com.au
Metalcorp Steel enjoys a strong position nationally with a growing retail
network, providing an unparalleled commitment to servicing the complete
steel needs of its customers.
www.metalcorpsteel.com.au
Our Distribution Businesses
INDEX. IIndex. Page.
Reinforcing Bar Chairs. 1
Reinforcing Bar Chairs. (Continued) 2
Reinforcing Bar Chairs and Accessories. 3
Bondek Sheeting and Accessories. 4
Crack Inducers, Dowels and Dowel Serts. 5
Dowel Sleeves and Square Dowel Bars. 6
Dowel Master and Accessories. 7
Expansion Jointing and Key Joints. 8
Key Joints and Accessories. 9
Galintels, Solid Base, Angles and Tees. 10
Building Film and Accessories. 11
Reinforcing Mesh, Bars and Trench Mesh.. 12
Reinforcing Bars. 13
Cages, Spirals and Threaded Bars. 14
Starter Bars, Joiners and Post Supports. 15
Tie Wires, Loop Ties and Tools. 16
Conversion Tables 17
Metalcorp Steel Addresses i
BlueScope Distribution, Sheet Metal Supplies and Pipeline Supplies Addresses. ii
I
Reinforcing and Associated Products.
Reinforcing Bar Chairs.
Product Code Height Std Pack Mass-kg SAP CodeCFB20 20 100 0.62 178027CFB25 25 100 0.69 168662CFB30 30 100 0.71 176165CFB32 32 100 0.72 167974CFB35 35 100 0.75 176166CFB40 40 100 0.81 167975CFB50 50 100 0.92 160405CFB65 65 100 1.10 167976CFB75 75 100 1.39 176167
CFBP40 40 100 2.31 110558CFBP50 50 100 2.70 110559
Product Code Height Std Pack Mass-kg SAP CodeCFM20 20 100 0.60 178029CFM25 25 100 0.64 176168CFM30 30 100 0.66 176165CFM32 32 100 0.70 178030CFM40 40 100 1.51 167977CFM50 50 100 1.58 137467CFM65 65 100 1.83 167978CFM75 75 100 1.96 167979
CFSBASE Plastic Base 100 2.90 178028
Product Code Height Std Pack Mass-kg SAP CodePDS20 20/25 100 0.83 178055PDS25 25/30 100 0.89 178056PDS30 30/40 100 1.11 178057PDS35 35/45 100 1.26 178058PDS40 40/50 100 1.36 178059PDS50 50/65 100 3.00 178060PDS65 65/75 100 3.60 178061PDS90 90/100 100 4.20 178062PDS110 110/120 100 4.80 178063PDS130 130/140 100 5.30 178064PDS150 150/160 100 5.90 178065PDS170 170/180 100 6.50 178066PDS190 190/200 100 7.00 178067
BCBASE130 Plastic Base 100 3.00 201549
Product Code Height Std Pack Mass-kg SAP CodeBASE152 20-140 100 5.2 155766BASE224 150-220 50 5.5 168259
PLASTIC CLIP FAST SPACERS.
PLASTIC DECK CHAIRS.
CON-BCHAIR-CLIPFAST-M*
METAL BASES.
CON-DCHAIR-PLAS*
Used in supporting top and bottom
Use for precast and tilt up panels.
CON-BCHAIR-CLIPFAST-BASE
Use for suspended slabs.
reinforcing.
Plastic Clip Fast Spacers and Deck Chairs.
CON-BCHAIR-CLIPFAST-B*
Suitable for bars 12mm to 16mm diameter.
Use for suspended slabs.
PLASTIC CLIP FAST SPACERS.
SAP Search Description.
1
SAP Search Description.
Use for beams and columns.
SAP Search Description.
SAP Search Description.
Suitable for bars 20mm to 36mm diameter.
CON-BCHAIR-METAL-BASE*To use with wire bar chairs.
"M"style mesh support.
Reinforcing Bar Chairs. (Cont.)
Product Code Std Pack Mass-kg SAP CodeFW2012 4 - 12 100 1.00 171482FW2512 4 - 12 100 1.00 176200FW2520 16 - 20 100 1.00 179427FW3012 4 - 12 100 2.00 176201FW3020 12 - 20 100 2.00 190498FW4012 3 - 12 100 2.00 168261FW4020 12 - 20 100 2.00 176202FW5012 4 - 12 100 2.00 168262FW5020 12 - 20 100 2.00 176203FW6012 4 - 12 100 2.00 171483FW6512 8 - 12 100 2.00 100009FW7512 4 - 12 100 4.80 171484FW7520 12 - 20 100 4.80 176205
Product Code Std Pack Mass-kg SAP CodeBCPT20 200 3.00 137457BCPT25 100 2.00 110551BCPT30 100 2.00 167980BCPT40 100 2.00 137458BCPT50 100 5.00 143355BCPT65 100 6.00 137459BCPT75 100 7.00 110554BCPT80 80 100 7.50 137461BCPT90 100 8.00 176156BCPT100 100 11.00 110550BCPT110 50 5.00 155767BCPT120 50 7.00 167981BCPT130 50 8.00 137463BCPT140 50 9.00 167982BCPT150 50 10.00 155768BCPT160 50 10.00 176157BCPT170 50 11.00 176158BCPT180 25 8.00 160404BCPT190 25 8.50 176159BCPT200 25 9.00 137464BCPT210 210 25 9.00 179378BCPT220 25 9.00 167983BCPT230 25 10.00 176160BCPT240 25 10.00 137465BCPT250 25 10.00 176161BCPT260 25 11.00 176162BCPT270 270 25 11.50 100009BCPT280 25 12.00 177184BCPT290 290 25 12.50 176163BCPT300 25 12.50 137466BCPT320 25 13.50 176164BCPT340 25 14.00 178026BCPT360 25 14.50 179380BCPT380 25 15.00 100009
360
Four leg wire supports.
Used for Top and Bottom reinforcing.
Used with flat metal bases.
506575
90100110
250240230220
3040
120
140130
SAP Search Description.
CON-BCHAIR-BCPT*
200190180170160150
2025
320300
SAP Search Description.
Bar Size.
CON-BCHAIR-BCPT*
Used with flat metal bases. 280
260
Four leg wire supports.
Use for Top and Bottom reinforcing.
FASTWHEEL PLASTIC SPACER.
PLASTIC TIPPED WIRE CHAIRS.
Plastic Fastwheel Spacers and Slab on Ground Chairs.
2
Bar Size.
CON-FASTWHEEL*
Used to clip onto fitments.
Best used for columns and piers.
380
340
Reinforcing Bar Chairs & Accessories.
Product Code Height Std Pack Mass-kg SAP CodeSOG2540 25/40 100 2.20 110552SOG5065 50/65 100 2.50 143353
SOGC5065 Clip on 100 2.40 168171SOG5065H Slide Clip H 100 2.70 176175SOG7590 75/90 100 3.10 143354SOG85100 85/100 100 3.30 110556SOG105110 105/110 100 6.20 137452SOG115120 115/120 100 7.50 137453SOG125130 125/130 100 7.80 137454SOG135140 135/140 100 8.60 137455SOG145150 145/150 100 8.80 137456
Product Code Height Std Pack Mass-kg SAP CodeTMS65 65 25 1.20 109530
TMS6016 60 25 1.20 10009
Product Code Height Std Pack Mass-kg SAP CodeASPW25 25 125 20.00 176151ASPW30 30 100 17.00 176152ASPW35 35 100 20.00 100009ASPW40 40 75 176154ASPW45 45 75 20.00 100009ASPW50 50 60 17.00 176155ASPW55 55 50 20.00 100009ASPW60 60 40 100009ASPW65 65 40 20.00 178024ASPW70 70 30 100009ASPW75 75 30 19.00 177754ASPW80 80 25 100009ASPW85 85 25 100009CBF6550 75 25 100009
Product Code Size Bar Std Pack Mass-kg SAP CodeBARGUARD 12 to 36mm 100 3.80 137447
Product Code Bar Size Std Pack Mass-kg SAP CodeRS1220 12 to 20 50 2.35 168174RS2432 24 to 32 50 3.20 168175
REO SOKS.
Used for slabs placed on the ground.
TRENCH MESH SUPPORTS.
CONCRETE ASPRO CHAIRS.
Also suits Fence Posts/Pickets.
BAR GUARDS.
Used with trench mesh and Z cages.
SAP Search Description.
Dual height concrete block spacers.
CON-BCHAIR-ASPRO*
RS2432 will also fit Star® pickets.
CON-CAP-REO-SOK*Removable safety cap.
SAP Search Description.
Slab on Ground, Trench Mesh Supports & Accessories.
CON-BCHAIR-PLAS-SOG*
SLAB ON GROUND SPACERS.
50/65 Clip on50/65 Slide Clip H Base
Suitable for meshes or bar reinforcing.
3
SAP Search Description.
SAP Search Description.
SAP Search Description.CON-TRENCH-MESH-SUPP-ALL*
CON-CAP-BARGUARD*End cap for reinforcing bar.
BONDEK® & Accessories.
LYSAGHT BONDEK® is a high strength structural steel decking
Available in three thicknesses, BONDEK® is suitable fordomestic applications such as home units and town houses,as well as commercial construction in steel-framed and
Lengths can be custom cut to suit project requirements.
YieldFast and easy to install (590mm coverage). Strength Works as a composite slab saving on (mm) kg/m² kg/m MPa m²/tconcrete and reinforcing costs. 0.60 8.52 5.03 550 117.37
0.75 10.50 6.20 550 95.24With ribs at 200mm centres, this creates a safe 1.00 13.79 8.14 550 72.52working platform with slip resistant embossing on ribs.Installation of suspended services and ceilings without drilling into the concrete slab.Reliable interlocking mechanism provides horizontal lapping for faster installation.
Heavy duty square nut to suspendPolyethylene end plugs stop concrete and ceilings or services. Glued to a paper
strip that makes insertion easy.Threads: M8, M10 & M12Loads: 390 to 670kg
Lightweight bracket for rods to suspend ceilings or services (other than fire sprinkler systems). Max. Load: 100kg. Pressed metal threaded bracket to
suspend ceilings or services.Thread: M6 Max. Load. 270kg
Plastic trim to cover gaps formed by ribs.Used when underside of BONDEK® formsan exposed ceiling. Stock length: 3000mm Polystyrene foam stops concrete
and air from entering ends of ribs.Stock length: 1200mm
A galvanized section that creates a Required: 300mm per sheet of Bondek.
cut, mitred and screwed on site..Stock slab depths: 100(176181), 125(176182), 25mm x 1.0mm. Fixed with self-drilling hex. head.150mm(176183) (others to special order). Teks screws with drill points. 10-16 x 16Stock length: 6100mm Required: 40 per length of Edgeform.
permanent formwork at the slab edges -
Bonfill.
End Plugs.
Edgeform.
SAP Code - 179396 (Plated)
Ceiling Suspension Nut.
Acts as permanent formwork with minimal propping.Length range is 600mm to 10.000 metres.
Durable galvanized coating.
Excellent spanning capacities.Material Specifications.
Thickness SAP Code
BONDEK® Decking.
4
concrete-framed buildings.
manufactured from zinc coated steel to AS1397.
181217
Bonwedge.
Bonstrip.
181219
BONDEK® Accessories.
air from entering the end of the ribs.
Brackets from builders strapping.
Mass Coverage
181218
Bon-nut
BONDEK®
Crack Inducers, Dowels & Dowel Serts.
Product Code Description Dimension SAP CodeDYCRAK253 Plain 25 x 3000 168169
DYCRAK453 Plain 45 x 3000 168170
Product Code Description Colour SAP CodeDYCRAK253B Rip a Strip Black 176191
DYCRAK453B Rip a Strip Black 178052
Product Code Description Dimension SAP CodeDYGCRAK25 Plastic Strip 3000 x 150 100009
Product Code Bar Size Length SAP CodeDL16450FC 16 450 162809DL16600FC 16 600 178597DL20450FC 20 450 178711DL20600FC 20 600 171792
Product Code Bar Size Length SAP CodeDL16450FCD 16 450 178608DL16600FCD 16 600 178609DL20450FCD 20 450 178612DL20600FCD 20 600 178613
Product Code Bar Size Length SAP CodeDWLSERT16 16 200 162833DWLSERT20 20 300 162834
Product Code Bar Size Std Pack SAP CodeCONCAP12 12 100 109516CONCAP16 16 100 167973CONCAP20 20 100 137469CONCAP24 24 100 176197
CON-CRACK-IND-CAP-BLK-45-0300
DOWEL BARS Hot Dipped Galvanized.
DOWEL SERTS.
SAP Search Description.
Hot dipped galvanized round bar used to control movement in joints of concrete slabs. GR250R friction cut.
REO-DOWEL-R250N-BLK-FC-16-450
REO-DOWEL-R250N-BLK-FC-20-600
SAP Search Description.
REO-DOWEL-R250N-BLK-FC-16-600
Crack Inducers, Dowels & Dowel Serts.
CON-CRACK-IND-45-03000
CON-CRACK-IND-CAP-BLK-25-0300
CON-CRACK-IND-25-03000
SAP Search Description.
SAP Search Description.CRACK-A-JOINT®
CRACK-A-JOINT®.Surface crack control strips for small pours.
5
CON-EXP-CAP-16
CON-DOWEL SERT-20-300-600
REO-DOWEL-R250N-BLK-FC-20-450
A plastic cap with a hinged end, to fit over a round bar, creating a void at the end of the dowel bar.
REO-DOWEL-R250N-HDGAL-FC-16-450
DOWEL EXPANSION CAPS.
Black round bar used to control movements in joints of concrete slabs. Grade 250R friction cut.
CON-EXP-CAP-24
REO-DOWEL-R250N-HDGAL-FC-16-600
REO-DOWEL-R250N-HDGAL-FC-20-600
SAP Search Description.
CON-DOWEL-SERT-16-200-400
Nail on, two part, black plastic sleeve for dowels.
Fluted preformed metal crack inducer designed to induce a crack along the strip as concrete cures.
CON-EXP-CAP-20
SAP Search Description.
CON-EXP-CAP-12
No Known Code.SAP Search Description.
CRACK INDUCER ON GROUND.
DOWEL BARS.
Designed to induce a crack in floor slab from the ground up. Up to 200mm slabs.
REO-DOWEL-R250N-HDGAL-FC-20-450
Dowel Sleeves & Square Dowel Bars.
Product Code SAP CodeKJUDS16R 179461KJUDS20R 179462KJUDS16S 192458KJUDS20S 192459KJUDSB 179460
Product Code SAP CodeSSR1623 181161SSR1630 181162SSR2023 100009SSR2030 181164SSNP16 181159SSNP20 181160
Product Code SAP Code Photos for illustration.DQ16300FC 100009DQ16400FC 178586DQ16450FC 178587DQ16500FC 178588DQ16600FC 100009DQ20300FC 100009DQ20400FC 177044DQ20450FC 100009DQ20500FC 177045DQ20600FC 191653DQ25300FC 100009DQ25400FC 100009DQ25500FC 100009DQ25600FC 100009
Product Code SAP Code Photos for illustration.DQ16400FCD 178589DQ16450FCD 100009DQ16500FCD 100009DQ16600FCD 100009DQ20400FCD 100009DQ20450FCD 100009DQ20500FCD 177046DQ20600FCD 178590DQ25400FCD 100009DQ25500FCD 100009DQ25600FCD 100009 Friction cut.
No Known Code.
REO-DOWEL-MS-BLK-FC-SQ-20-500
20 x 300
25 x 400
20 x 60025 x 300
20 x 40020 x 450
16 x 50016 x 450
25 x 500
Black square dowel bar friction cut dowels used to control movement in joints of concrete slabs.SQUARE DOWEL BARS Hot Dipped Galvanized.
20 x 400
Dowel Sleeves & Square Dowel Bars.
6
Description
CON-KEY-JNT-DOWEL-SLV-RD-20
CON-DOWEL-SPEED-SLV-RD-16-240
SAP Search Description.
SAP Search Description.
REO-DOWEL-MS-HDGAL-FC-SQ-20-500
25 x 600
16 x 300 Round
25 x 500
20 x 50020 x 450
25 x 600
16 x 400
25 x 40020 x 600
Description
16 x 600
20 x 300 Round
SAP Search Description. Description16 x 240 Round
20 x 240 Round16 x 310 Round
Round dowel sleeves with reusable nailing plates.
16 - Nail Plate20 - Nail Plate
SQUARE DOWEL BARS - Black.
CON-DOWEL-SPEED-SLV-RD-NAIL-PL-20
16 x 600
Description16 x 300
16 x 450REO-DOWEL-MS-BLK-FC-SQ-16-450
No Known Code.
REO-DOWEL-MS-BLK-FC-SQ-20-400
No Known Code.
Hot Dipped Galvanized dowels as above.
REO-DOWEL-MS-BLK-FC-SQ-16-400
REO-DOWEL-MS-BLK-FC-SQ-16-500
No Known Code.
No Known Code.
SAP Search Description.
No Known Code.
No Known Code.
REO-DOWEL-MS-HDGAL-FC-SQ-16-400
No Known Code.
No Known Code.
No Known Code.
No Known Code.No Known Code.
REO-DOWEL-MS-HDGAL-FC-SQ-20-600
No Known Code.
No Known Code.
DOWEL SPEED SLEEVES.
No Known Code.
16 x 400
20 x 500
16 x 500
CON-DOWEL-SPEED-SLV-RD-16-310
CON-DOWEL-SPEED-SLV-RD-20-310CON-DOWEL-SPEED-SLV-RD-20-240
REO-DOWEL-MS-BLK-FC-SQ-20-600
CON-DOWEL-SPEED-SLV-RD-NAIL-PL-16
DOWEL SLEEVES UNIVERSAL.
Full length dowel sleeve suitable for joining applications. Available for round or square dowels and colour coded.
16 x 300 SquareCON-KEY-JNT-DOWEL-SLV-SQ-1620 x 300 Square
50 MF Boot
CON-KEY-JNT-DOWEL-SLV-RD-16
CON-KEY-JNT-DOWEL-SLV-SQ-20CON-KEY-JNT-DOWEL-SLV-BOOT
20 x 300 Round
Dowelmaster® and Dowel Accessories.
Product Code Description Std Pack SAP CodeDLMASTER16 Square 16 100 100009DLMASTER20 Square 20 100 100009
NAILPLT16 Nail Plate 16 100 176935NAILPLT20 Nail Plate 20 100 180062
Pictures are for illustration
Product Code Description Std Pack SAP CodeDYDCM16200 16 x 200 100 176192DYDCM16250 16 x 250 100 100009DYDCM16300 16 x 300 100 100009DYDCM20200 20 x 200 100 100009DYDCM20250 20 x 250 100 176193DYDCM20300 20 x 300 100 100009DYDCM25200 25 x 200 100 100009DYDCM25250 25 x 250 100 100009DYDCM25300 25 x 300 100 100009
Pictures are for illustration
Product Code Description Std Pack SAP CodeDYDD06B 110 x 6 Blk 1 100009DYDD06G 110 x 6 Gal 1 100009DYDD10B 110 x 10 BLK 1 100009DYDD10G 110 x 10 Gal 1 100009
DDKB110625 110 x 6 Blk 25 100009DDKG110625 110 x 6 Gal 25 100009DDKB111015 110 x 10 Blk 15 100009DDKG111015 110 x 10 Gal 15 100009
Pictures are for illustration
Product Code Description Dimension SAP CodeDYPC6154B Black 3000 x 6 193052
DYPC6154G Galvanized 3000 x 6 100009
Pictures are for illustration
Product Code Description Dimension SAP CodePFORM060 Pecaform 600 x 2400 100009PFORM090 Pecaform 900 x 2400 100009PFORM120 Pecaform 1200x2400 100009PFORM150 Pecaform 1500x2400 100009PFORM180 Pecaform 1875x2400 100009
Pictures are for illustration
FORMWORK PRODUCTS - Pecaform™SAP Search Description.
Flat steel wire mesh with heat shrunk polyethylene applied. An alternative to conventional formwork.
SAP Search Description.No Known CodeNo Known CodeNo Known CodeNo Known CodeNo Known CodeNo Known Code
Diamond® Dowels & Sleeves.
No Known Code
No Known Code
No Known Code
Square metal cover for square dowels.
Dowelmaster® and Dowel Accessories.
No Known Code
GEN-MISC-PLATE-NAIL-DOWELMSTR-20
No Known Code
No Known Code
SAP Search Description.
Square plastic sleeve for square steel dowels.
Dowelmaster®.
DOWEL COVERS SQUARE METAL.
SAP Search Description.
7
CON-KEY-JNT-DOWEL-CRADLE-PL-150
GEN-MISC-PLATE-NAIL-DOWELMSTR-16
6mm dowels @ 450mm centres. 150mm slab
CON-DOWEL-CVR-SQ-16-200
CON-DOWEL-CVR-SQ-20-250
No Known Code
No Known Code
No Known Code
No Known CodeNo Known Code
Standard configuration 6mm dowels at 450mm centres.
DOWEL PLATE CRADLES.SAP Search Description.
High performance steel plate dowel cradle system for concrete slab joints.
High performance steel plate dowel system for joints in concrete slabs.Sleeve acts as nail plate with nails already inserted ready for easy use.
No Known CodeNo Known CodeNo Known CodeNo Known CodeNo Known Code
Expansion Jointing & Key Joints.
Product Code DescriptionJFP1075 PlainJFP10100 Plain
CON-JF-FOAM-PLAIN-010-125-25000-176216 JFP10125 PlainJFP10150 PlainJFP10200 PlainJFZ1075 ZippedJFZ10100 ZippedJFZ10125 ZippedJFZ10150 ZippedJFZ10200 ZippedZFA1075 AdhesiveZFA10100 AdhesiveZFA10125 AdhesiveJFA10150 AdhesiveJFA10200 Adhesive
Product Code DescriptionJF1075 Stiff JointJF10100 Stiff Joint
Product Code DescriptionKJC100 Key JointKJC150 Key JointKJC200 Key JointKJC300 Key Joint
KJCWEDGE WedgeKJCPEG350 Peg & WedgeKJCPEG400 Peg & WedgeKJCPEG500 Peg & Wedge
Product Code DescriptionKJCCPB25 Black w/strip
KJCCRG25 GreyKJCCRG6 Grey
Product Code DescriptionKJRM12 Yellow Rigid KJRM20 Grey Rigid
CON-KEY-JNT-8PW-200-6000 - 155772CON-KEY-JNT-8PW-300-6000 - 179457
Galvanized sheet metal profile used in forming contraction joints in concrete footpaths, using a peg & wedge.
PVC Capping Permanent.
500 (8)CON-KEY-JNT-PEG-WEDGE-400-QTY8 - 178082
CON-JF-ADH-010-150-25000 - 176214CON-JF-ADH-010-200-25000 - 178073
STIFF EXPANSION JOINT.
KEY JOINTS & ACCESSORIES.
A flexible foam for joints in concrete slabs.
2440 x 75 x 10CON-JF-DRY-010-100-02440 - 179443
25mx125mmx10mm
CON-JF-FOAM-ZIP-010-200-25000 - 178078No Known Code - 100009
No Known Code - 100009
25mx100mmx10mm
25mx200mmx10mm
CON-JF-ADH-010-125-25000 - 192381
CON-JF-FOAM-ZIP-010-100-25000 - 178075
No Known Code - 100009
25mx150mmx10mm
25mx75mmx10mm
No Known Code - 100009
FLEXIBLE EXPANSION JOINTING.
25mx100mmx10mm25mx125mmx10mm
25mx125mmx10mm
25mx200mmx10mm25mx75mmx10mm25mx100mmx10mm
25mx75mmx10mm
25mx150mmx10mm
Expansion Jointing & Key Joints.
350 (8)150 (8)
6000 x 3006000 x 2006000 x 150
SAP Search Description - SAP Code.
CON-KEY-JNT-8PW-100-6000 - 155771
L x W x t
SAP Search Description - SAP Code.
8
L x W x tCON-JF-FOAM-ZIP-010-075-25000 - 178074
CON-JF-FOAM-ZIP-010-150-25000 - 178077
No Known Code - 100009
SAP Search Description - SAP Code.
25mx150mmx10mm25mx200mmx10mm
CON-JF-ADH-010-075-25000 - 190583CON-JF-ADH-010-100-25000 - 176213
CON-JF-DRY-010-075-02440 - 179442
CON-KEY-JNT-PEG-WEDGE-150-QTY8 - 176223CON-KEY-JNT-PEG-WEDGE-350-QTY8 - 100009
PVC Capping Removable.
6000 x 100
SAP Search Description - SAP Code.
2440 x 100 x 10
Dimension
A bitumen impregnated stiff fibrous material used in joints in concrete slabs.
CON-KEY-JNT-8PW-150-6000 - 137475
PVC Rebate Moulds.
400 (8)No Known Code - 100009
No Known Code - 100009
24m x 9mm x 13mmA rebate mould with a strippable capping.
6.0mx12mmx14mm24mx7.5mmx10mm
Dimension
No Known Code - 100009
No Known Code - 100009
No Known Code - 100009
3.0mx12mmx12mmSAP Search Description - SAP Code. Dimension
3.0mx10mmx20mm
A removable rebate mould.
CON-KEY-JNT-REBATE-MLD-12-12 - 176224
Key Joints & Accessories.
Product Code Description DimensionKJFC100 100mm 6mx30mmx12mmKJFC150 150mm 6mx40mmx12mmKJFC200 200/300mm 6mx50mmx12mm
Picture for illustration.
Product Code Description DimensionKJFXJ1024 Profile & foam 2400 x 100KJFX1030 Profile & foam 3000 x 100KJFXJDS Sleeve/foot
Picture for illustration.
Product Code Description DimensionKJD100 Key joint 3.0m x 100 (10)KJD100 Key joint 6.0m x 100 (10)KJD125 Key joint 3.0m x 125 (10)KJD150 Key joint 6.0m x 150 (10)KJD200 Key joint 6.0m x 200 (10)
Picture for illustration.
Product Code Description DimensionKJDRS25B Black 25m (2) - 155769KJDRS25G Grey 25m (2) - 171337KJDCR25 Rem Std 25m x 10mm (2)
Picture for illustration.
Product Code Description DimensionKJDPEG350 Stakes 10 x 350 (8)KJDPEG450 Stakes 10 x 450 (8)KJDPEG550 Stakes 10 x 550 (8)
Picture for illustration.
Product Code Description DimensionKJDEXP100 Expanda joint 3m x 100mm (10)KJDEXP125 Expanda joint 3m x 125mm (10)KJDEXP150 Expanda joint 3m x 150mm (10)KJDEXP200 Expanda joint 3m x 200mm (10)KJDEXP250 Expanda joint 3m x 250mm (10)
Picture for illustration. Expanda joint is a standard Key Joint with 5mm closed-cell foamon the inside allowing a continuous pour each side of the joint.
Galvanized sheet metal profile used in forming contraction joints using a drive and twist stake system.
EXPANDA JOINT.
No Known Code - 100009
No Known Code - 100009No Known Code - 100009
CON-KEY-JNT-4PW-100-06000 - 205205
No Known Code - 100009No Known Code - 100009
SAP Search Description - SAP Codes.
No Known Code - 100009
9
SAP Search Description - SAP Codes.
CON-KEY-JNT-4PW-125-03000 - 203797
No Known Code - 100009
No Known Code - 100009
No Known Code - 100009
SAP Search Description - SAP Codes.
KEY JOINT.
KEY JOINT CAPPING.
STAKES.
Key Joints & Accessories.
CON-KEY-JNT-FILLER-150-06000 - 168167
SAP Search Description - SAP Codes.
CON-KEY-JNT-FILLER-100-06000 - 168166
FOAM FILLER STRIPS.
EXPANSION JOINT.
CON-KEY-JNT-FILLER-200-06000 - 168168
No Known Code - 100009
CON-KEY-JNT-CAP-REM - 155769
SAP Search Description - SAP Codes.
SAP Search Description - SAP Codes.
CON-KEY-JNT-CAP-REM-GRY-07-10-25000CON-KEY-JNT-CAP-PERM-BLK-10-12-25000
CON-KEY-JNT-4PW-200-03000 - 203799CON-KEY-JNT-4PW-150-03000 - 203798
No Known Code - 100009
CON-KEY-JNT-4PW-100-03000 - 203796
Galintel® - Solid Base & Rendabar Angles.
* NB. All weights shown are approximate.Product Code kg/len SAP Code
GLIN8F85 4.00 138288GLIN9F85 4.50 138289GLIN10F85 5.00 138290GLIN11F85 5.50 138291GLIN12F85 6.00 138292
Product Code kg/len SAP CodeGLIN12A100 10.70 138259GLIN15A100 14.25 138260GLIN18A100 17.10 138261GLIN21A100 19.95 138262GLIN24A100 22.80 138263GLIN27A100 25.65 138264
Product Code kg/len SAP CodeGLIN18A150 21.60 144088GLIN21A150 25.20 138273GLIN24A150 28.80 138274GLIN27A150 32.40 138275GLIN30A150 36.00 138276GLIN33A150 39.60 138277GLIN36A150 43.20 138278GLIN40A150 48.00 138279
Galintel® - RENDABAR ANGLE 100x100x8mmProduct Code kg/len SAP Code
REN09A100 7.20 138266REN12A100 9.60 138267REN15A100 12.00 138268REN18A100 14.40 138269REN21A100 16.80 138270REN24A100 19.20 138271
Galintel® - RENDABAR ANGLE 150x100x8mmProduct Code kg/len SAP Code
REN18A150 17.64 182649REN21A150 20.58 138281REN24A150 23.52 138282REN27A150 26.46 138283REN30A150 29.40 138284REN33A150 32.34 138285REN36A150 35.28 138286REN40A150 39.20 17929815
Length1.800m2.100m2.400m2.700m3.000m3.300m3.600m4.000m
15151515
Qty/bundle151515
25252525
1.500m1.800m2.100m2.400m
Qty/bundleLength900mm1.200m
2525
4.000m
1515151515151515
2.700m
3.300m3.600m
Length1.800m2.100m2.400m
25
Length 800mm
3.000m
900mm1.000m
Galintel® is a cold rolled flat bar providing recesses for mortar.
1.100m1.200m
25
Galintel® - ANGLES. 100x100x6mm
Galintel® - ANGLES. 150x100x6mm
2525
Galintel® is a cold rolled angle bar providing recesses for mortar.Used in the formation of composite beams in brick veneer construction.
Length1.200m1.500m
LINFL-85-8-MRS-GAL-01200
LINAN-100-100-06-MRS-GAL-01500
LINAN-100-100-06-MRS-GAL-02100
SAP Search Description.LINAN-100-100-06-MRS-GAL-01200
LINAN-150-100-6-MRS-GAL-04000
SAP Search Description.
LINAN-100-100-8-REN-GAL-01500LINAN-100-100-8-REN-GAL-01800
LINAN-100-100-8-REN-GAL-02400
Galintel® - Solid Base & Rendabar Angles. Hot Dipped Galvanized.
LINFL-85-8-MRS-GAL-00800
LINFL-85-8-MRS-GAL-01000LINFL-85-8-MRS-GAL-01100
Galintel® - FLATS.Qty/bundle
25
2525
LINAN-150-100-8-REN-GAL-02100LINAN-150-100-8-REN-GAL-02400
1.800m2.100m
LINAN-150-100-8-REN-GAL-01800
LINAN-150-100-6-MRS-GAL-01800
LINAN-150-100-6-MRS-GAL-02400LINAN-150-100-6-MRS-GAL-02700LINAN-150-100-6-MRS-GAL-03000
LINAN-150-100-6-MRS-GAL-03600
10
LINFL-85-8-MRS-GAL-00900
SAP Search Description.
LINAN-150-100-6-MRS-GAL-02100
LINAN-150-100-8-REN-GAL-02700
2.400m2.700m
2525
LINAN-100-100-06-MRS-GAL-02400
LINAN-150-100-8-REN-GAL-04000
LINAN-100-100-06-MRS-GAL-02700
LINAN-100-100-06-MRS-GAL-01800
Qty/bundle
2525
Qty/bundle
LINAN-150-100-8-REN-GAL-03600
SAP Search Description.
SAP Search Description.
LINAN-150-100-6-MRS-GAL-03300
LINAN-150-100-8-REN-GAL-03300
LINAN-100-100-8-REN-GAL-00900
LINAN-100-100-8-REN-GAL-02100
LINAN-100-100-8-REN-GAL-01200
LINAN-150-100-8-REN-GAL-03000
Galintel® is a cold rolled angle bar providing recesses for mortar.
Galintel® is a cold rolled angle bar providing recesses and slots to facilitaterendering onto composite beams in brickwork.
Used in the formation of composite beams in brick veneer construction.
Building Products & Accessories.
Product Code Length mm DimensionGLINT27 2700 200 x 200 x 7GLINT30 3000 200 x 200 x 7GLINT33 3300 200 x 200 x 7GLINT936 3600 200 x 200 x 9GLINT939 3900 200 x 200 x 9GLINT942 4200 200 x 200 x 9GLINT945 4500 200 x 200 x 9GLINT951 5100 200 x 200 x 9GLINT954 5400 200 x 200 x 9GLINT957 5700 200 x 200 x 9
Photos for illustration GLINT960 6000 200 x 200 x 9
Product Code Description SAP CodeFS3425 Orange Super 176241FO2633 Arcon Premium 100009FO2250 Orange Polythene 100009FO2450 Orange Polythene 176239FP2250 Orange Premium 100009FP2450 Orange Premium 176240FB2250 Black Polythene 100009FB2450 Black Polythene 137468
FBHI2250 Black High Impact 178086FBHI2450 Black High Impact 176238TPVC30 Grey Duct Tape 137481
Product Code Height SAP CodePOD150 175 179472POD175 175 176234POD225 225 176235POD300 300 176236POD375 375 176237
Product Code Dimension SAP CodePODSPA2 100 - 110 (25) 176231PODSPA4 100 - 300 (25) 176230
PODRAIL40 40 x 600 (25) 179471Plastic multi purpose beam spacers.
Galintel® MULTI-RIB T BAR.
POLYTHENE BUILDING FILM.
POLYSTYRENE VOID FORMERS.
CON-POD-SPCR-EDGE-2WAY
Moisture barrier and sealing tape used in slab on ground construction.
Galintel® T section is a cold rolled lintel bar providing recesses for mortar.Used in the formation of composite beams in cavity brick wall construction supporting both skins of brickwork.
SAP Search Description.
CON-POD-VOID-1090-1090-375A void former manufactured from expanded polystyrene used on ground concrete raft slabs.
PLASTIC SPACERS.
CON-POD-VOID-1090-1090-150
CON-POD-VOID-1090-1090-225CON-POD-VOID-1090-1090-300
CON-POD-VOID-1090-1090-175
11
SAP Code - SAP Search Description.
CON-POD-SPCR-4WAY
140222 - TBAR-2009-2009-MRS-GAL-5700
CON-POLY-SUPR-300UM-ORNG-4000-25000No Known CodeNo Known Code
CON-POLY-IND-200UM-ORNG-4000-50000
No Known Code
CON-POD-SPCR-PODFIX
SAP Search Description.
Galintel® Tees - Uniflow Drainage & Building Products Accessories.
140217 - TBAR-2007-2007-MRS-GAL-3000
180136 - TBAR-2009-2009-MRS-GAL-3900
140216 - TBAR-2007-2007-MRS-GAL-2700
177058 - TBAR-2009-2009-MRS-GAL-3600
SAP Search Description.
CON-POLY-PREM-200UM-ORNG-2000-50000CON-POLY-PREM-200UM-ORNG-4000-50000
140218 - TBAR-2007-2007-MRS-GAL-3300
180136 - TBAR-2009-2009-MRS-GAL-4200
140220 - TBAR-2009-2009-MRS-GAL-5100
GEN-TAPE-JOINING-PVC-GRY-50-30000
178629 - TBAR-2009-2009-MRS-GAL-4500
140221 - TBAR-2009-2009-MRS-GAL-5400
152763 - TBAR-2009-2009-MRS-GAL-6000
CON-POLY-IND-200UM-BLK-4000-50000CON-POLY-HI-IMP-200UM-BLK-2000-50000CON-POLY-HI-IMP-200UM-BLK-4000-50000
Reinforcing Mesh & Bars, Trench Mesh.
Product Long Cross Weight Pack SAP Photo forCode Wire mm Wire mm kg Size Number illustration.
RL1218 11.9 @ 100 7.6 @ 200 157 10 152255RL1118 10.65 @ 100 7.6 @ 200 131 15 156254RL1018 9.5 @ 100 7.6 @ 200 109 15 161352RL918 8.55 @ 100 7.6 @ 200 93 20 138332RL818 7.6 @ 100 7.6 @ 200 79 20 109282RL718 6.75 @ 100 7.6 @ 200 68 20 138331
Product Long Cross Weight Pack SAP Photo forCode Wire mm Wire mm kg Size Number illustration.SL81 7.6 @ 100 7.6 @ 100 105 20 109281SL102 9.5 @ 200 9.5 @ 200 80 20 156265SL92 8.55 @ 200 8.55 @ 200 65 20 109285SL82 7.6 @ 200 7.6 @ 200 52 30 109283SL72 6.75 @ 200 6.75 @ 200 40 40 109280SL62 6.0 @ 200 6.0 @ 200 33 50 101856SL52 4.75 @ 200 4.75 @ 200 21 50 109279
Product Width Weight Pack SAP Photo forCode mm kg Size Number illustration.
L8TM3 200 3 7 40 109291L8TM4 300 4 9 40 138335L8TM5 400 5 11 30 156266L11TM3 200 3 13 30 109286L11TM4 300 4 18 30 109287L11TM5 400 5 22 30 109288L12TM3 200 3 16 30 109589L12TM4 300 4 22 30 109290
Product Stock SAP LengthCode Length (m) Number per tN12S6 6.0 100095 1088 181N12S9 9.0 136814 1088 121N16S6 6.0 100111 612 102N16S9 9.0 100113 612 68N16S12 12.0 153936 612 51N20S12 12.0 136818 392 32N24S12 12.0 110947 272 23N28S12 12.0 143009 200 17N32S12 12.0 150191 153 13N36S12 12.0 176288 121 10
No. Wires
MESH-REO-RL818-BLK-D500L-2400-6000
DB-12-D500N-6000
m/t
MESH-TRENCH-L11TM4-BLK-D500L-300-6000MESH-TRENCH-L11TM5-BLK-D500L-400-6000MESH-TRENCH-L12TM3-BLK-D500L-200-6000
MESH-TRENCH-L8TM3-BLK-D500L-200-6000
RECTANGULAR RIBMESH.
SQUARE RIBMESH.
TRENCH MESH.
REINFORCING BAR.
DB-32-D500N-12000DB-36-D500N-12000
DB-20-D500N-12000
MESH-TRENCH-L12TM4-BLK-D500L-300-6000
DB-16-D500N-9000
Reinforcing Meshes RL & SL - Trench Meshes - Reinforcing Bar. AS/NZS 4671
MESH-REO-SL52-BLK-D500L-2400-6000
SAP Search Description.
DB-16-D500N-6000
SAP Search Description.
MESH-REO-SL82-BLK-D500L-2400-6000
MESH-REO-RL1018-BLK-D500L-2400-6000
MESH-REO-SL81-BLK-D500L-2400-6000
SAP Search Description.
MESH-REO-RL718-BLK-D500L-2400-6000
12
MESH-REO-RL1118-BLK-D500L-2400-6000
MESH-REO-RL918-BLK-D500L-2400-6000
MESH-REO-SL72-BLK-D500L-2400-6000
DB-24-D500N-12000DB-28-D500N-12000
DB-16-D500N-12000
DB-12-D500N-9000
Photo forillustration purposes.
MESH-TRENCH-L8TM4-BLK-D500L-300-6000MESH-TRENCH-L8TM5-BLK-D500L-400-6000MESH-TRENCH-L11TM3-BLK-D500L-200-6000
SAP Search Description.
MESH-REO-SL102-BLK-D500L-2400-6000MESH-REO-SL92-BLK-D500L-2400-6000
MESH-REO-SL62-BLK-D500L-2400-6000
MESH-REO-RL1218-BLK-D500L-2400-6000
Reinforcing Bars.
Product Length Metres LengthsCode mm per t per tS12S6 6000 1088 181S12S9 9000 1088 121
Product Length Metres LengthsCode mm per t per tR6S6 6000 3691 619R10S6 6000 1559 261R12S6 6000 1083 181R16S6 6000 609 102R20S6 6000 390 65R24S6 6000 271 45
Product Bar Size &Code Shape
SB1012H R10 Safety HookSB1012H R10 LSB120820 N12 LSB121020 N12 LSB12010 N12 Safety HookSB121215 N12 LSB121000 N12 StraightSB121200 N12 StraightSB121500 N12 StraightSB122000 N12 StraightSB123000 N12 Straight
Product Bar Size &Code Degree of bend
CB1205 N12 90 degreeCB1206 N12 90 degree
CB120545 N12 45 degreeCB120645 N12 45 degreeCB1606 N16 90 degreeCB1607 N16 90 degree
Photos are for CB10745 N16 45 degreeillustration purposes.
700 x 700700 x 700
(mm)
500 x 500600 x 600500 x 500
2000
1000x150x100
1000x150x120
1500
1000178559 - REO-BAR-START-D500N-12-1200
600 x 600
100009 - No known code(mm x mm)
Standard cut and bent deformed bar Grade D500N bar to AS/NZS 4671.
100009 - No known code100009 - No known code
1200
100009 - No known code
1200 x 150
Standard cut and deformed bar Grade D500N bar to AS/NZS 4671.
Round bar Grade R250N to ASNZS 4671.
178564 - REO-BAR-START-D500N-12-2000
SAP Code - SAP Search Description.
CORNER BARS.
STARTER BARS.
143358 - REO-BAR-START-D500N-12-1000-200
178560 - REO-BAR-START-D500N-12-1200-150178557 - REO-BAR-START-D500N-12-1000
13
178569 - REO-BAR-START-R250N-10-1000-2001000 x 200800 x 2001000 x 200
600 x 600
3000
Dimension
178558-REO-BAR-START-D500N-12-1000-150-100H
100009 - No known code
SWIMMING POOL REINFORCING BAR
REINFORCING PLAIN ROUND BAR.
Grade D250N deformed bar to AS/NZS 4671. Used in the construction of swimming pools.
176994 - RD-010.00-R250N-06000177003 - RD-012.00-R250N-06000
177017 - RD-024.00-R250N-06000
Dimension
179992 - RD-006.50-R250N-06000
Reinforcing Bars - Starter Bars - Corner Bars. AS/NZS 4671.
136814 - DB-12-D250N-09000143004 - DB-12-D250N-06000
SAP Code - SAP Search Description.
100009 - No known code
SAP Code - SAP Search Description.
143357-REO-BAR-START-D500N-12-0800-200
196087-REO-BAR-START-R250N-10-1000-120-150H
178563 - REO-BAR-START-D500N-12-1500
SAP Code - SAP Search Description.
178565 - REO-BAR-START-D500N-12-3000
100009 - No known code
177008 - RD-016.00-R250N-06000177013 - RD-020.00-R250N-06000
Cages, Spirals & Threaded Bars.
Product Photos are forCode Bottom illustration purposes.
Z17X20410 200 L8TM3Z17X30410 300 L8TM3Z17X40410 400 L8TM3Z17X20412 200 L8TM4Z17X30412 300 L11TM3Z17X40412 400 L11TM4Z17X30810 300 L11TM3Z17X30610 300 L11TM3Z17X40810 400 L11TM3Z17X30811 300 L11TM4Z17X40811 400 L11TM4
Product Width x Photos are forCode Height (mm) illustration purposes.
TZ30X20808 300 x 200 L8TM4TZ30X30808 300 x 300 L8TM4TZ30X20811 300 x 200 L11TM4TZ30X30811 300 x 300 L11TM4TZ20X40608 200 x 400 L8TM3TZ20X30611 200 x 300 L11TM3TZ20X40611 200 x 400 L11TM3TZ20X30612 200 x 300 L12TM3TZ20X40612 200 x 400 L12TM3
SAP Code
178677178678178679178680178681
Product Length SAP Code mm mm Code
TRZM1224 2400 178576TRZM1227 2700 478577TRZM1230 3000 178578TRZM1236 3600 180128TRZM1624 2400 178579TRZM1627 2700 178580TRZM1630 3000 178581
SPIRALS.
WZ-FOOTING CAGES.
Z-FOOTING CAGES.
Prefabricated cages 6.0m long used in footings. Substitution for trench mesh and ligatures.
Prefabricated trench mesh cages 6.0m long used in footings.
SAP Code - SAP Search Description.
100009 - No Known Code
L11TM4
100009 - No Known Code
100009 - No Known Code
RBW6M0SP25RBW6M0SP30
200250300
170
SAP Search Description.
RBW6M0SP17RBW6M0SP20
CodeWIRE-06.00-BRT-RIB-SPIRAL-40T-170WIRE-06.00-BRT-RIB-SPIRAL-40T-200
mmDiameterProduct
WIRE-06.00-BRT-RIB-SPIRAL-40T-450 450RBW6M0SP45
REO-BAR-THR-SA5-12-2700
Manufactured from deformed wire 500 MPa L Grade to AS/NZS 4671. THREADED ROD - metric thread.
REO-BAR-THR-SA5-16-2400REO-BAR-THR-SA5-16-2700
REO-BAR-THR-SA5-12-3600
100009 - No Known Code
100009 - No Known Code100009 - No Known Code
100009 - No Known Code
SAP Search Description.
REO-BAR-THR-SA5-12-2400
WIRE-06.00-BRT-RIB-SPIRAL-40T-300
100009 - No Known Code
100009 - No Known Code
100009 - No Known Code
100009 - No Known Code
100009 - No Known Code100009 - No Known Code
100009 - No Known Code100009 - No Known Code
161616
12
12
100009 - No Known Code100009 - No Known Code
L8TM3
L12TM3L12TM3
L11TM3100009 - No Known CodeL11TM3
L11TM4
14
L11TM3
Bottom
REO-BAR-THR-SA5-16-3000
1212
Diameter mm
REO-BAR-THR-SA5-12-3000
100009 - No Known Code
WIRE-06.00-BRT-RIB-SPIRAL-40T-250
Cages - Spirals - Threaded Bars.
L8TM3L8TM3L8TM3
Substitution forTopSAP Code - SAP Search Description. Height
100009 - No Known Code
L8TM4
L8TM4L8TM4
L11TM3L11TM4
Top
L11TM4L11TM4
L8TM3
L11TM3
Starter Bars, Joiners and Post Supports.
Product Dimension Diameter Bag Code mm mm Qty
SBLZM12180 180 x 50 12 50SBLZM12200 200 x 150 12 50SBLZM12300 300 x 50 12 50SBLZM16180 180 x 50 16 50SBLZM16200 200 x 150 16 50
Product SAPCode Number
COUPLERZ12 162749COUPLERZ16 162748
Product SAPCode Number
NUTZ12Z 137539NUTZ16Z 137540
Product Dimension Diameter SAPCode mm mm Number
WASHR12Z 50 x 50 x 3 12 178488WASHR16Z 50 x 50 x 3 16 143365
Items may not be stocked at all outlets.
Product Length Post SizeCode mm mm
U Bracket 300 100 sqU Bracket 450 100 sqU Bracket 600 100 sq
Shark Fin Shaft 200 100 sqShaft 300 100 sq
Shark Fin 310U Bracket Shaft Post Foot Post Foot 410
HEXAGON NUTS.
HEXAGON COUPLERS.
SQUARE WASHERS.
Starter Bars - Joiners - Post Supports.
100009 - No Known Code
178572 - REO-BAR-START-THR-SA5-12-180-050
178574 - REO-BAR-START-THR-SA5-12-300-050
SAP Code - SAP Search Description.
178573 - REO-BAR-START-THR-SA5-12-200-150
SLAB STARTER BARS.
Cut and bent bar with a threaded end.178575 - REO-BAR-START-THR-SA5-16-200-150
15
CON-COUP-HEX-ZP-16
GEN-FAST-HEX-NUT-ZP-16
100009 - No Known Code
195571 - GEN-POST-SUPPORT-50-100-600100009 - No Known Code
mmDiameter
Bolt on, embedded in concrete and COLORBOND® steel post support variations.
CON-COUP-HEX-ZP-12mm1216
SAP Search Description.Diameter
Used in conjunction with threaded bars.
Used in conjunction with threaded bars and bolts.
SAP Search Description.
GEN-FAST-FLT-WASHER-ZP-SQ-50-3-12
1216
GEN-FAST-HEX-NUT-ZP-12
SAP Search Description.
Used in conjunction with threaded bars and bolts.
Photos are forPOST SUPPORTS.
illustration purposes.
Hot dipped galvanized steel brackets for attaching timber posts in domestic applications.
100009 - No Known Code
GEN-FAST-FLT-WASHER-ZP-16
SAP Code - SAP Search Description.
100009 - No Known Code
For use with COLORBOND® steel Fencing.185405 - FEN-FI-POST-BRT-SHARK-FIN-150-100-GAL
100009 - No Known Code
Tie Wires, Loop Ties and Tools.
Product Diameter SAPCode mm Number
TWA1M603 1.6 157336TWA1M605 1.6 140464TWA1M610 1.6 140466AWCL1M6 1.57 100009AWCL3M2 3.15 198474
Coils of black annealed tie wire used as a steel fixing aid.
Product Length SAPCode mm NumberLT110 110 150727LT125 125 110561LT150 150 137479LT200 200 176227
LTHP110 110 176225LTHP125 125 200 176226LTHP150 150 179468LTG110 110 157883LTG125 125 176228LTG150 150 169632LTG200 200 176229
Product SAPCode Number
IDLREEL 188620IDLNYBELT 176250
IDLBELT 176249IDLCOILA14 100009IDLCOILA 100009IDLCOILG 100009TWSTLN 153683
NIPP8 176928NIPP200 100009No Known Code
LOOP TIES.
REEL, BELT & TOOLS.
1.57mm Galv tie wire coil for reel.
CON-TIE-IDL-BELT-LTRNo Known CodeNo Known Code
Reinforcing Notes.
Tools used in steel fixing may change or be deleted over time. Please check..
Qty perRoll
20002000
CON-MISC-BELT-PACK-HOLDER
SAP Search Description.
1.57mm black tie wire coil for reel.No Known Code
16
CON-LT-GAL-1.57-150
GEN-WIRE-TIE-CYCLONE-TOOL
Description
Aluminium reel for tie wire.Wide nylon belt & buckle for reel.
Twisting tool with long handle.
CON-LT-GAL-1.57-200
Knippex Nippers 200mm.
2000
2000
CON-LT-BLK-1.6-110
GEN-MISC-NIPP-EC-200
2000
CON-TIE-IDL-BELT-NLN
CON-LT-BLK-1.6-150
CON-LT-GAL-1.57-110
2000
Tie wires with loops used as a steel fixing aid.
2000
CON-LT-BLK-1.6-200
2000
Tie Wires - Loop Ties - Belt and Tools.
Description
3kg coil5kg coil
TIE WIRE.
SAP Search Description.
WIRE-01.60-TIE-BLK-ANN-0001.0KG WIRE-01.60-TIE-BLK-ANN-0005.0KG
SAP Search Description.
CON-LT-BLK-1.6-110-QTY0200
10kg coil
200
200
CON-LT-BLK-1.6-125
WIRE-01.60-TIE-BLK-ANN-0010.0KG
Cresent end cutters 200mm.
WIRE-03.15-TIE-BLK-ANN-050.00KGNo Known Code
CON-LT-BLK-1.6-125-QTY200CON-LT-BLK-1.6-150-QTY200
50kg coil50kg coil
Leather belt for reel.1.40mm black tie wire coil for reel.
CON-LT-GAL-1.57-125
Conversion tables.
centimetres inches inches centimetres kilogram pound pound kilogram(cm) (in) (in) (cm) kg lb lb kg
1/32 0.7938 7/8 22.2250 1 0.3937 1 2.54 1 2.205 1 0.45361/16 1.5875 29/32 23.0188 2 0.7874 2 5.08 2 4.409 2 0.90723/32 2.3813 15/16 23.8125 3 1.1810 3 7.62 3 6.614 3 1.3611/8 3.1750 31/32 24.6063 4 1.5750 4 10.16 4 8.818 4 1.8145/32 3.9688 1.0 25.4000 5 1.9690 5 12.70 5 11.02 5 2.2683/16 4.7625 1 1/32 26.1938 6 2.3620 6 15.24 6 13.23 6 2.7227/32 5.5563 1 1/16 26.9875 7 2..756 7 17.78 7 15.43 7 3.1751/4 6.3500 1 3/32 27.7813 8 3.1500 8 20.32 8 17.64 8 3.6299/32 7.1438 1 1/8 28.5750 9 3.5430 9 22.86 9 19.84 9 4.0825/16 7.9375 1 5/32 29.3688 10 3.9370 10 25.40 10 22.05 10 4.536
11/32 8.7313 1 3/16 30.1625 50 19.690 50 127.0 50 110.2 50 22.683/8 9.5250 1 7/32 30.9563 100 39.370 100 254.0 100 220.5 100 45.36
13/32 10.3188 1 1/4 31.75007/16 11.1125 1 9/32 32.5438 kilometre kilometre tonnes tons tons tonnes
15/32 11.9063 1 5/16 33.3375 (km) (km) t T t T1/2 12.7000 1 11/32 34.1313 1 0.6214 1 1.609 1 0.9842 1 1.016
17/32 13.4938 1 3/8 34.9250 2 1.243 2 3.219 2 1.968 2 2.0329/16 14.2875 1 13/32 35.7188 3 1.864 3 4.828 3 2.953 3 3.048
19/32 15.0813 1 7/16 36.5125 4 2.485 4 6.437 4 3.937 4 4.0645/8 15.8750 1 15/32 37.3063 5 3.107 5 8.047 5 4.921 5 5.080
21/32 16.6688 1 1/2 38.1000 6 3.728 6 9.656 6 5.905 6 6.09611/16 17.4625 1 17/32 38.8938 7 4.350 7 11.27 7 6.889 7 7.11223/32 18.2563 1 9/16 39.6875 8 4.971 8 12.87 8 7.874 8 8.1283/4 19.0500 1 19/32 40.4813 9 5.592 9 14.48 9 8.858 9 9.144
25/32 19.8438 1 5/8 41.2750 10 6.214 10 16.09 10 9.842 10 10.1613/16 20.6375 1 21/32 42.0688 50 31.07 50 80.47 50 49.21 50 50.8027/32 21.4313 1 11/16 42.8625 100 62.14 100 160.90 100 98.42 100 101.60
lb/f N lb/f N psi MPa MPa psi psi MPa MPa psi1 4.45 80 355.9 1 0.006895 0.1 14.5 1500 10.34 6.0 870.22 8.90 90 400.3 50 0.3447 0.2 29.01 1600 11.03 6.5 942.73 13.34 100 445 100 0.6895 0.3 43.51 1700 11.72 7.0 10154 17.79 200 990 200 1.379 0.4 58.02 1800 12.41 8.0 11605 22.24 300 1334 300 2.068 0.5 72.52 1900 13.10 9.0 13056 26.69 400 1779 400 2.758 0.6 87.02 2000 13.79 10.0 14507 31.14 500 2224 500 3.447 1.0 145.0 2100 14.48 11.0 15958 35.59 600 2669 600 4.137 1.5 217.6 2200 15.17 12.0 17409 40.03 700 3114 700 4.826 2.0 290.1 2300 15.86 13.0 188510 44.50 800 3559 800 5.516 2.5 362.6 2400 16.55 14.0 203120 89.00 900 4003 900 6.205 3.0 435.1 2500 17.24 15.0 217630 133.40 1000 4450 1000 6.895 3.5 507.6 2600 17.93 16.0 232140 177.90 2000 8890 1100 7.584 4.0 580.2 2700 18.62 17.0 246650 222.40 3000 13340 1200 8.274 4.5 652.7 2800 19.31 18.0 261160 266.90 4000 17790 1300 8.963 5.0 725.2 2900 19.99 19.0 275670 311.40 5000 22240 1400 9.653 5.5 797.7 3000 20.68 20.0 2901
Pressure - psi/MPa/psi.
Length - cms/inches/cms. Mass - kilos/pounds/kilos.
Mass - tonnes/tons/tonnes.Length - klms/miles/klms.
17
Length - Fraction of inches/mm.
inches mm inches mm
miles miles
lb/f - newtons Pressure - psi/MPa/psi.
Locations. Phone Number. Locations. Phone Number.QUEENSLAND QUEENSLAND (Cont)Acacia Ridge - No stock on site. Ph: (07) 3452 3888 Oxley Ph: (07) 3716 3177Charters Towers Ph: (07) 4761 5000 Rockhampton Ph: (07) 4924 3233Emerald Ph: (07) 4983 7333 Roma Ph: (07) 4624 3400Mareeba Ph: (07) 4048 4130 Toowoomba Ph: (07) 4616 1333Northgate Ph: (07) 3622 9323 Warwick Ph: (07) 4667 5080
NEW SOUTH WALES NEW SOUTH WALES (Cont)Albury Ph: (02) 6058 5466 Dubbo Ph: (02) 6841 2155Armidale Ph: (02) 6774 8610 Tamworth Ph: (02) 6755 3233Bathurst Ph: (02) 6330 9333 Wagga Wagga Ph: (02) 6932 3500
SOUTH AUSTRALIAAdelaide (Ottoway) Ph: (08) 8301 3777
VICTORIA VICTORIA (Cont)Ballarat Ph: (03) 5320 7833 Portland Ph: (03) 5522 4254Bendigo Ph: (03) 5434 9860 Mildura Ph: (03) 5051 6381Dandenong Ph: (03) 9768 1200 Shepparton Ph: (03) 5821 1688Geelong Ph: (03) 5247 4100 Warrnambool Ph: (03) 5559 4260
WESTERN AUSTRALIA WESTERN AUSTRALIA (Cont)Balcatta Ph: (08) 9229 4460 Kewdale Ph: (08) 9251 2500
i
Phone 1300 306 204
Metalcorp Steel Pty Ltd - ABN 13 002 581 213
www.metalcorpsteel.com.au
Locations. Phone Number. Locations. Phone Number.QUEENSLAND QUEENSLAND (Cont)Northgate Ph: (07) 3246 9222 Mt Isa Ph: (07) 4747 2833Bundaberg Ph: (07) 4131 4200 Rockhampton Ph: (07) 4924 3233
:hPsnriaC (07) 4048 9400 Toowoomba Ph: (07) 4614 2000Gladstone Ph: (07) 4979 6400 Townsville Ph: (07) 4729 3939Mackay Ph: (07) 4968 1666
SELAW HTUOS WENSELAW HTUOS WEN (Cont)Albury Ph: (02) 6058 5488 Dubbo Ph: (02) 6841 2800Auburn Ph: (02) 9714 8000 Tamworth Ph: (02) 6755 3222
:hPffidraC (02) 4904 6410 Wagga Wagga Ph: (02) 6932 3599Coffs Harbour Ph: (02) 6648 7388
VICTORIA VICTORIA (Cont)Ballarat Ph: (03) 5320 7855 Morwell Ph: (03) 5134 6266Bendigo Ph: (03) 5448 3811 Portland Ph: (03) 5522 4255Geelong Ph: (03) 5240 0300 Westall Ph: (03) 9549 2666Mildura Ph: (03) 5051 6388
SOUTH AUSTRALIA NORTHERN TERRITORYOttoway Ph: (08) 8301 3801 Darwin Ph: (08) 8984 2600
AILARTSUA NRETSEWAILARTSUA NRETSEW (cont)Albany Ph: (08) 9841 9700 Geraldton Ph: (08) 9921 9300Bunbury Ph: (08) 9724 5220 Kalgoorlie Ph: (08) 9024 1388Esperance Ph: (08) 9072 3100 Kewdale Ph: (08) 6250 1000
AINAMSATAINAMSAT (Cont)Hobart Ph: (03) 6211 4330 Launceston Ph: (03) 6324 1250
SELAW HTUOS WENDNALSNEEUQTrade Coast Ph: (07) 3853 9100 Chullora Ph: (02) 9766 9100
AILARTSUA HTUOSAIROTCIVSunshine Ph: (03) 9932 5500 Wingfield Ph: (08) 8260 3747
ii
Call 13 72 82BlueScope Distribution Ltd.
BlueScope Distribution Pty Ltd - ABN 88 096 380 068
BlueScope Sheet Metal Supplies.
BlueScope Pipeline Supplies.1300 66 1156
Our Project & Processing Services
Our nationwide network of specialist metals distribution businesses offers a range of value added services to our customers.
WAREHOUSING AND LOGISTICS
Our modern warehouse facilities are serviced by a fleet of delivery vehicles and are designed to process, store, receiveand despatch sheet, coil and other metal products with maximum efficiency while maintaining excellent quality.
High product quality delivery standards are maintained by storing products undercover, with inspection prior to despatch, and packaging the material to ensure that no damage occurs in storage or transit.
INVENTORY AND STOCK MANAGEMENT
Inventory Management Programs utilising SAP/MRP software ensure the availability of materials, purchased at competitive prices and held against customer forecasts and delivery schedules.
Our customers benefit from;
• Reducing your own warehouse space for stock
• A reduction of damage in storage
• Reducing the management hours needed for inventory.
MATERIALS PROCESSING
Our modern processing centres are able to process a wide range of steel products, dimensions, types and grades. From state of the art multi-blanking, guillotining, shearing, slitting for our sheet and coil product range to plasma, oxy and saw cutting, drilling and coping for our Steel and Tube product range; our businesses are ready to provide all your steel processing needs.
EXPORT SERVICES
Our Exports business unit is in place specifically to supply and service our overseas customers with all products and services within BlueScope Distribution.
Whether it is bulk supply of high quality steel plate or the airfreight of a small, single, specialised valve to the remotest of locations, the export sales unit has the resources, experience and commitment to satisfy your metal supply requirements.
The information contained in this brochure is provided by way of general information only, and should not be relied upon by any person. You must seek specific advice as to the suitability of the products featured in this brochure for the purpose for which, and the manner in which, you propose to use them. This may involve further independent analysis and testing. BlueScope Steel Limited, and its related bodies corporate take no responsibility for any adverse consequences of any nature which arise as a result of reliance on this brochure. © 2008 BlueScope Steel Limited (ABN 16 000 011 058)
BlueScope is a trade mark of BlueScope Steel Limited ABN 16 000 011 058.
BSD0
020
05/
08