Registration in CUTV sections is not acceptable. Note ... · ECOR 2606 [0.5] Numerical Methods CCDP...

Carleton University 1

EngineeringThe Co-operative Education Option is available inEngineering. See the Co-operative Education section ofthis Calendar for details.

Graduation RequirementsIn addition to the requirements listed below, students mustsatisfy:

1. the University regulations including the processof Academic Performance Evaluation (see theAcademic Regulations of the University section of thisCalendar),

2. the Faculty regulations applying to all B.Eng.programs (see the Academic Regulations for theBachelor of Engineering Degree ).

Students should consult with their Department whenplanning their program and selecting courses.

Course Categories for EngineeringProgramsThe following categories of courses are used in definingthe programs.

Basic Science ElectivesCourses in this classification must be chosen from amongthose listed as acceptable for the current academic year.The list is published annually on the engineering academicsupport website: carleton.ca/engineering/uas . The listwill change from year to year and only courses on the listvalid in the year the course is taken, or courses for whichformal approval of the Faculty has been obtained can beused as credit toward an engineering degree. Coursesnot on the list may be used to fulfill a Basic Scienceelective requirement with the permission of the Faculty ofEngineering and Design and provided all other specifiedcourse requirements are met. Registration in CUTVsections is not acceptable. Note that access to courseson the list is not guaranteed and may depend on spaceavailability and the satisfaction of other requirementsincluding, for example, course prerequisites. Note thatstudents using CHEM 1000 to fulfill this requirement arenot required to take CHEM 1101. CHEM 1000 will replaceCHEM 1101 and the Basic Science Elective in their degreerequirements.

Complementary Studies ElectivesCourses in this classification must be chosen from amongthose listed as acceptable for the current academic year.The list is published annually on the engineering academicsupport website: carleton.ca/engineering/uas . The listwill change from year to year and only courses on the listvalid in the year the course is taken, or courses for whichformal approval of the Faculty has been obtained can beused as credit toward an engineering degree. English asa Second Language courses are not acceptable for useas Complementary Studies electives in any engineeringprogram. Courses not on the list may be used to fulfill aComplementary Studies elective requirement with the

permission of the Faculty of Engineering and Design andprovided all other specified course requirements are met.Registration in CUTV sections is not acceptable. Notethat access to courses on the list is not guaranteed andmay depend on space availability and the satisfactionof other requirements including, for example, courseprerequisites. Students must take a minimum of 1.0 creditof complementary studies at Carleton University.

Communications Electives for CommunicationsEngineering

ELEC 4503 [0.5] Radio Frequency Lines andAntennas

ELEC 4505 [0.5] Telecommunication CircuitsELEC 4506 [0.5] CAD for Communication CircuitsELEC 4509 [0.5] Communication LinksELEC 4702 [0.5] Fiber Optic CommunicationsSYSC 4607 [0.5] Wireless Communications

Science Electives for Engineeringa. All courses in BIOCb. All Courses in BIOL except:

BIOL 1902 [0.5] Natural HistoryBIOL 2106 [0.5] Human Genetics and Evolution

c. All courses in CHEM except:CHEM 1003 [0.5] The Chemistry of Food, Health and

Drugsd. All Courses in ERTH except:

ERTH 2401 [0.5] DinosaursERTH 2402 [0.5] Climate Change: An Earth

Sciences PerspectiveERTH 2403 [0.5] Introduction to Oceanography

e. All Courses in MATH, STAT except:MATH 0107 [0.5] Algebra and GeometryMATH 1002 [1.0] Calculus and Introductory Analysis

IMATH 1007 [0.5] Elementary Calculus IMATH 1009 [0.5] Calculus: with Applications to

BusinessMATH 1102 [1.0] Algebra IMATH 1107 [0.5] Linear Algebra IMATH 1401 [0.5] Elementary Mathematics for

Economics IMATH 1402 [0.5] Elementary Mathematics for

Economics IIMATH 2007 [0.5] Elementary Calculus IIMATH 2008 [0.5] Intermediate CalculusMATH 2009 [0.5] Intermediate Calculus for Science

StudentsMATH 2000 [1.0] Calculus and Introductory Analysis

II (Honours)MATH 2404 [0.5] Ordinary Differential Equations IMATH 2454 [0.5] Ordinary Differential Equations

(Honours)STAT 2507 [0.5] Introduction to Statistical Modeling ISTAT 2605 [0.5] Probability ModelsSTAT 2606 [0.5] Business Statistics I

f. All courses in PHYS at the 2000 level or above except:PHYS 2101 [0.5] Mechanics and Properties of MatterPHYS 2305 [0.5] Electricity and Magnetism

2 Engineering

PHYS 2306 [0.5] Physics of Electrical and ElectronicMeasurements I

PHYS 3308 [0.5] Electromagnetism

Program RequirementsAerospace EngineeringBachelor of EngineeringStudents in Aerospace Engineering must satisfy therequirements for one of the following streams:

Aerospace Engineering - Bachelor ofEngineeringStream A: Aerodynamics, Propulsion andVehicle Performance (21.5 credits)

8HFirst Year1. 4.0 credits in: 4.0

CHEM 1101 [0.5] Chemistry for Engineering StudentsMATH 1004 [0.5] Calculus for Engineering or PhysicsMATH 1005 [0.5] Differential Equations and Infinite

Series for Engineering or PhysicsMATH 1104 [0.5] Linear Algebra for Engineering or

SciencePHYS 1004 [0.5] Introductory Electromagnetism and

Wave MotionECOR 1010 [0.5] Introduction to EngineeringECOR 1101 [0.5] Mechanics IECOR 1606 [0.5] Problem Solving and Computers

2. 1.0 credit in Complementary Studies Electives 1.0Second Year3. 5.0 credits in: 5.0

MATH 2004 [0.5] Multivariable Calculus forEngineering or Physics

MATH 3705 [0.5] Mathematical Methods IMAAE 2001 [0.5] Engineering Graphical DesignMAAE 2101 [0.5] Engineering DynamicsMAAE 2202 [0.5] Mechanics of Solids IMAAE 2300 [0.5] Fluid Mechanics IMAAE 2400 [0.5] Thermodynamics & Heat TransferMAAE 2700 [0.5] Engineering MaterialsECOR 2606 [0.5] Numerical MethodsCCDP 2100 [0.5] Communication Skills for

Engineering Students4. 0.5 credit in Basic Science Electives 0.5Third Year5. 5.0 credits in: 5.0

STAT 3502 [0.5] Probability and StatisticsMAAE 3004 [0.5] Dynamics of MachineryMAAE 3202 [0.5] Mechanics of Solids IIMAAE 3300 [0.5] Fluid Mechanics IIMAAE 3400 [0.5] Applied ThermodynamicsMAAE 3901 [0.5] Mech & Aero Engineering LabAERO 3002 [0.5] Aerospace Design and PracticeAERO 3700 [0.5] Aerospace MaterialsSYSC 3600 [0.5] Systems and SimulationELEC 3605 [0.5] Electrical Engineering

Fourth Year6. 4.5 credits in: 4.5

MAAE 4500 [0.5] Feedback Control SystemsECOR 4995 [0.5] Professional PracticeAERO 4003 [0.5] Aerospace Systems DesignAERO 4302 [0.5] Aerodynamics & Heat TransferAERO 4306 [0.5] Aerospace Vehicle PerformanceAERO 4308 [0.5] Aircraft Stability & ControlAERO 4907 [1.0] Aerospace Engineering ProjectECOR 3800 [0.5] Engineering Economics

7. 1.5 credits in 4000-level Mechanical and AerospaceEngineering (MAAE, AERO or MECH) , or ELEC 4504

1.5

Total Credits 21.5

Aerospace Engineering - Bachelor ofEngineeringStream B: Aerospace Structures, Systems andVehicle Design (21.5 credits)First year1. 4.0 credits in: 4.0





2. 1.0 credit in Complementary Studies Electives 1.0Second year3. 5.0 credits in: 5.0



Engineering Students4. 0.5 credit in Basic Science Electives 0.5Third year5. 5.0 credits in: 5.0

STAT 3502 [0.5] Probability and StatisticsMAAE 3004 [0.5] Dynamics of MachineryMAAE 3202 [0.5] Mechanics of Solids IIMAAE 3300 [0.5] Fluid Mechanics IIMAAE 3901 [0.5] Mech & Aero Engineering LabAERO 3002 [0.5] Aerospace Design and PracticeAERO 3101 [0.5] Lightweight StructuresAERO 3700 [0.5] Aerospace MaterialsSYSC 3600 [0.5] Systems and SimulationELEC 3605 [0.5] Electrical Engineering

Fourth year


6. 4.5 credits in: 4.5MAAE 4500 [0.5] Feedback Control SystemsMAAE 4102 [0.5] Materials: Strength & FractureECOR 4995 [0.5] Professional PracticeAERO 4003 [0.5] Aerospace Systems DesignAERO 4602 [0.5] Introductory AeroelasticityAERO 4608 [0.5] Composite MaterialsAERO 4907 [1.0] Aerospace Engineering ProjectECOR 3800 [0.5] Engineering Economics

7. 1.5 credits in 4000-level MAAE, AERO, or MECH orELEC 4504

1.5

Total Credits 21.5

Aerospace EngineeringStream C: Aerospace Electronics and Systems(21.5 credits)First year1. 4.5 credits in: 4.5




Wave MotionECOR 1010 [0.5] Introduction to EngineeringECOR 1101 [0.5] Mechanics IECOR 1606 [0.5] Problem Solving and ComputersCCDP 2100 [0.5] Communication Skills for

Engineering Students2. 0.5 credit in Complementary Studies Electives 0.5Second year3. 5.0 credits in: 5.0


MATH 3705 [0.5] Mathematical Methods IMAAE 2001 [0.5] Engineering Graphical DesignMAAE 2101 [0.5] Engineering DynamicsMAAE 2202 [0.5] Mechanics of Solids IMAAE 2700 [0.5] Engineering MaterialsECOR 2606 [0.5] Numerical MethodsELEC 2501 [0.5] Circuits and SignalsELEC 2507 [0.5] Electronics IELEC 2607 [0.5] Switching Circuits

4. 0.5 credit in Basic Science Electives 0.5Third year5. 5.0 credits in: 5.0

STAT 3502 [0.5] Probability and StatisticsMAAE 2400 [0.5] Thermodynamics & Heat TransferMAAE 3202 [0.5] Mechanics of Solids IIAERO 3002 [0.5] Aerospace Design and PracticeSYSC 3501 [0.5] Communication TheorySYSC 3600 [0.5] Systems and SimulationELEC 3500 [0.5] Digital ElectronicsELEC 3509 [0.5] Electronics IIELEC 3105 [0.5] Basic EM and Power EngineeringELEC 3909 [0.5] Electromagnetic Waves

Fourth year6. 3.0 credits in: 3.0

ECOR 4995 [0.5] Professional PracticeAERO 4003 [0.5] Aerospace Systems DesignAERO 4907 [1.0] Aerospace Engineering ProjectECOR 3800 [0.5] Engineering EconomicsMAAE 4500 [0.5] Feedback Control Systems

7. 1.5 credits from: 1.5AERO 3240 [0.5] Orbital MechanicsAERO 4009 [0.5] Aviation Management and

CertificationELEC 4503 [0.5] Radio Frequency Lines and

AntennasELEC 4505 [0.5] Telecommunication CircuitsSYSC 4600 [0.5] Digital Communications

8. 1.0 credit from: 1.0AERO 3841 [0.5] Spacecraft DesignAERO 4842 [0.5] Space Mission DesignELEC 4502 [0.5] Microwave CircuitsELEC 4509 [0.5] Communication LinksELEC 4600 [0.5] Radar and NavigationELEC 4706 [0.5] Digital Integrated ElectronicsSYSC 4405 [0.5] Digital Signal ProcessingSYSC 4607 [0.5] Wireless Communications

9. 0.5 credit in Complementary Studies Electives 0.5Total Credits 21.5

Aerospace EngineeringStream D: Space Systems Design (21.5 credits)First year1. 4.0 credits in: 4.0

MATH 1004 [0.5] Calculus for Engineering or PhysicsMATH 1005 [0.5] Differential Equations and Infinite



Wave MotionECOR 1010 [0.5] Introduction to EngineeringECOR 1101 [0.5] Mechanics IECOR 1606 [0.5] Problem Solving and ComputersCHEM 1101 [0.5] Chemistry for Engineering Students



MATH 3705 [0.5] Mathematical Methods ICCDP 2100 [0.5] Communication Skills for

Engineering StudentsECOR 2606 [0.5] Numerical MethodsMAAE 2101 [0.5] Engineering DynamicsMAAE 2001 [0.5] Engineering Graphical DesignMAAE 2400 [0.5] Thermodynamics & Heat TransferMAAE 2300 [0.5] Fluid Mechanics IMAAE 2700 [0.5] Engineering MaterialsMAAE 2202 [0.5] Mechanics of Solids I

4 Engineering


STAT 3502 [0.5] Probability and StatisticsSYSC 3600 [0.5] Systems and SimulationELEC 3909 [0.5] Electromagnetic WavesMAAE 3004 [0.5] Dynamics of MachineryMAAE 3901 [0.5] Mech & Aero Engineering LabMAAE 3300 [0.5] Fluid Mechanics IIMAAE 3202 [0.5] Mechanics of Solids IIAERO 3002 [0.5] Aerospace Design and PracticeAERO 3240 [0.5] Orbital MechanicsAERO 3841 [0.5] Spacecraft Design


ECOR 3800 [0.5] Engineering EconomicsECOR 4995 [0.5] Professional PracticeAERO 4540 [0.5] Spacecraft Dynamics and ControlAERO 4446 [0.5] Heat Transfer for Aerospace

ApplicationsAERO 4907 [1.0] Aerospace Engineering ProjectAERO 4842 [0.5] Space Mission DesignAERO 4442 [0.5] Transatmospheric and Spacecraft

PropulsionELEC 4509 [0.5] Communication Links

7. 1.5 credits from 4000-level MAAE, AERO or MECH, orAERO 3101, AERO 3700, ELEC 4503, ELEC 4600, ELEC4709

1.5

Total Credits 21.5

Architectural Conservation and SustainabilityEngineeringBachelor of EngineeringStudents must satisfy the requirements for one of thefollowing streams:

Architectural Conservation and SustainabilityEngineeringStream A: Structural (22.0 credits)

952AFirst year1. 5.5 credits in: 5.5

CHEM 1001 [0.5] General Chemistry ICHEM 1002 [0.5] General Chemistry IIMATH 1004 [0.5] Calculus for Engineering or PhysicsMATH 1005 [0.5] Differential Equations and Infinite


ScienceECOR 1010 [0.5] Introduction to EngineeringECOR 1101 [0.5] Mechanics IECOR 1606 [0.5] Problem Solving and ComputersARCH 1000 [0.5] Intro. to ArchitectureARCC 1202 [0.5] History of StructuresENVE 1001 [0.5] Architecture and the Environment

Second year2. 5.5 credits in: 5.5


CIVE 2200 [0.5] Mechanics of Solids ICIVE 2700 [0.5] Civil Engineering MaterialsENVE 2001 [0.5] Process Analysis for Environmental

EngineeringMAAE 2300 [0.5] Fluid Mechanics IMAAE 2400 [0.5] Thermodynamics & Heat TransferECOR 2606 [0.5] Numerical MethodsCCDP 2100 [0.5] Communication Skills for

Engineering StudentsARCC 2203 [0.5] Architectural Technology 3CDNS 2400 [0.5] Heritage Conservation in CanadaSTAT 2507 [0.5] Introduction to Statistical Modeling I

3. 0.5 credits from: 0.5CHEM 2800 [0.5] Foundations for Environmental

ChemistryERTH 2404 [0.5] Engineering Geoscience

Third year4. 5.0 credits in: 5.0

CIVE 3202 [0.5] Mechanics of Solids IICIVE 3203 [0.5] Introduction to Structural AnalysisCIVE 3204 [0.5] Introduction to Structural DesignCIVE 3205 [0.5] Design of Structural Steel

ComponentsCIVE 3206 [0.5] Design of Reinforced Concrete

ComponentsCIVE 3207 [0.5] Historic Site Recording and

AssessmentARCC 3202 [0.5] Architectural Technology 4ARCC 4500 [0.5] Design EconomicsARCH 2300 [0.5] Intro. to Modern ArchitectureARCH 4200 [0.5] Architectural Conservation

Philosophy and EthicsFourth year5. 3.5 credits in: 3.5

ECOR 4995 [0.5] Professional PracticeCIVE 4601 [0.5] Building Pathology and

RehabilitationCIVE 4918 [1.0] Design ProjectENVE 4105 [0.5] Green Building DesignENVE 4106 [0.5] Indoor Air QualityARCH 4206 [0.5] Recycling Architecture in Canada

and Abroad6. 2.0 credits from: 2.0

CIVE 4200 [0.5] Matrix Analysis of FramedStructures

CIVE 4201 [0.5] Finite Element Methods inStructural Analysis

CIVE 4202 [0.5] Wood EngineeringCIVE 4302 [0.5] Reinforced and Prestressed

Concrete DesignCIVE 4303 [0.5] Urban PlanningCIVE 4308 [0.5] Behaviour and Design of Steel

StructuresCIVE 4400 [0.5] Construction/Project ManagementCIVE 4403 [0.5] Masonry Design


CIVE 4500 [0.5] Computer Methods in CivilEngineering

(See Note 2, below)

Total Credits 22.0

Notes:

1. For Item 1 and students transferring into ArchitecturalConservation and Sustainability Engineering(Structural or Environmental Stream), students ingood standing and who have successfully completedCHEM 1101 while registered in another engineeringprogram may replace CHEM 1001 and CHEM 1002with CHEM 1101 plus one 0.5 credit either fromthe Basic Science Electives for Engineering or theScience Electives for Engineering or in AERO, CIVE,ELEC, IDES, MAAE, MECH or SYSC at the 2000-level or above.

2. For Item 6 in the Structural Stream, CIVE 4907 mayreplace 1.0 credit.

Architectural Conservation and SustainabilityEngineeringStream B: Environmental (22.0 credits)First year1. 5.5 credits in: 5.5



ScienceECOR 1010 [0.5] Introduction to EngineeringECOR 1101 [0.5] Mechanics IECOR 1606 [0.5] Problem Solving and ComputersARCH 1000 [0.5] Intro. to ArchitectureARCC 1202 [0.5] History of StructuresENVE 1001 [0.5] Architecture and the Environment



CIVE 2200 [0.5] Mechanics of Solids ICIVE 2700 [0.5] Civil Engineering MaterialsENVE 2001 [0.5] Process Analysis for Environmental

EngineeringMAAE 2300 [0.5] Fluid Mechanics IMAAE 2400 [0.5] Thermodynamics & Heat TransferECOR 2606 [0.5] Numerical MethodsCCDP 2100 [0.5] Communication Skills for

Engineering StudentsARCC 2203 [0.5] Architectural Technology 3CDNS 2400 [0.5] Heritage Conservation in CanadaSTAT 2507 [0.5] Introduction to Statistical Modeling I

3. 0.5 credit from: 0.5CHEM 2800 [0.5] Foundations for Environmental

ChemistryERTH 2404 [0.5] Engineering Geoscience

Third year

4. 5.0 credits in: 5.0CIVE 3204 [0.5] Introduction to Structural DesignCIVE 3207 [0.5] Historic Site Recording and

AssessmentCIVE 4307 [0.5] Municipal HydraulicsENVE 2002 [0.5] MicrobiologyENVE 3001 [0.5] Water Treatment Principles and

DesignENVE 3002 [0.5] Environmental Engineering

Systems ModelingENVE 3004 [0.5] Contaminant and Pollutant

Transport in the EnvironmentARCC 3202 [0.5] Architectural Technology 4ARCC 4500 [0.5] Design EconomicsARCH 4200 [0.5] Architectural Conservation

Philosophy and EthicsFourth year5. 5.0 credits in: 5.0

ECOR 4995 [0.5] Professional PracticeCIVE 4601 [0.5] Building Pathology and

RehabilitationENVE 4005 [0.5] Wastewater Treatment Principles

and DesignENVE 4101 [0.5] Waste ManagementENVE 4104 [0.5] Environmental Planning and Impact

AssessmentENVE 4105 [0.5] Green Building DesignENVE 4106 [0.5] Indoor Air QualityENVE 4918 [1.0] Design ProjectARCH 4206 [0.5] Recycling Architecture in Canada

and Abroad6. 0.5 credit from: 0.5

CIVE 4400 [0.5] Construction/Project ManagementENVE 3003 [0.5] Water Resources EngineeringMECH 4401 [0.5] Power Plant AnalysisMECH 4403 [0.5] Power Generation SystemsMECH 4406 [0.5] Heat TransferMECH 4407 [0.5] Heating & Air ConditioningSREE 4002 [0.5] The Energy Economy, Reliability

and Risk

Total Credits 22.0

Notes:

1. For Item 1 and students transferring into ArchitecturalConservation and Sustainability Engineering(Structural or Environmental Stream), students ingood standing and who have successfully completedCHEM 1101 while registered in another engineeringprogram may replace CHEM 1001 and CHEM 1002with CHEM 1101 plus one 0.5 credit either fromthe Basic Science Electives for Engineering or theScience Electives for Engineering or in AERO, CIVE,ELEC, IDES, MAAE, MECH or SYSC at the 2000-level or above.

2. For Item 6 in the Structural Stream, CIVE 4907 mayreplace 1.0 credit.

6 Engineering

Biomedical and Electrical EngineeringBachelor of Engineering (21.0 credits)First year1. 5.0 credits in: 5.0

BIOL 1003 [0.5] Introductory Biology ICHEM 1001 [0.5] General Chemistry ICHEM 1002 [0.5] General Chemistry IIMATH 1004 [0.5] Calculus for Engineering or PhysicsMATH 1005 [0.5] Differential Equations and Infinite






ECOR 2606 [0.5] Numerical MethodsELEC 2501 [0.5] Circuits and SignalsSYSC 2006 [0.5] Foundations of Imperative

ProgrammingMATH 3705 [0.5] Mathematical Methods ICCDP 2100 [0.5] Communication Skills for

Engineering StudentsELEC 2507 [0.5] Electronics IELEC 2607 [0.5] Switching CircuitsELEC 3105 [0.5] Basic EM and Power Engineering

3. 0.5 credit from: 0.5BIOL 2005 [0.5] Human PhysiologyBIOC 2200 [0.5] Cellular BiochemistryCHEM 2203 [0.5] Organic Chemistry I


SYSC 3600 [0.5] Systems and SimulationELEC 3509 [0.5] Electronics IIELEC 3500 [0.5] Digital ElectronicsELEC 3908 [0.5] Physical ElectronicsSTAT 3502 [0.5] Probability and StatisticsSYSC 3006 [0.5] Computer OrganizationSYSC 3501 [0.5] Communication TheoryELEC 3909 [0.5] Electromagnetic WavesECOR 3800 [0.5] Engineering Economics



SYSC 4201 [0.5] Ethics, Research Methodsand Standards for BiomedicalEngineering

ECOR 4995 [0.5] Professional PracticeELEC 4601 [0.5] Microprocessor SystemsSYSC 4203 [0.5] Bioinstrumentation and Signals

SYSC 4405 [0.5] Digital Signal Processing7. 1.0 credit in: 1.0

SYSC 4917 [1.0] Biomedical Engineering Project8. 1.0 credit from: 1.0

ELEC 4709 [0.5] Integrated SensorsSYSC 4202 [0.5] Clinical EngineeringSYSC 4205 [0.5] Image Processing for Medical

Applications9. 0.5 credit from SYSC or ELEC at the 3000-level orabove with a laboratory/problem analysis component.

0.5


Biomedical and Mechanical EngineeringBachelor of Engineering (21.5 credits)First year1. 5.0 credits in: 5.0

CHEM 1001 [0.5] General Chemistry ICHEM 1002 [0.5] General Chemistry IIBIOL 1003 [0.5] Introductory Biology IMATH 1004 [0.5] Calculus for Engineering or PhysicsMATH 1005 [0.5] Differential Equations and Infinite






MATH 3705 [0.5] Mathematical Methods ICCDP 2100 [0.5] Communication Skills for

Engineering StudentsMAAE 2101 [0.5] Engineering DynamicsMAAE 2001 [0.5] Engineering Graphical DesignMAAE 2400 [0.5] Thermodynamics & Heat TransferMAAE 2300 [0.5] Fluid Mechanics IMAAE 2700 [0.5] Engineering MaterialsMAAE 2202 [0.5] Mechanics of Solids I



ECOR 2606 [0.5] Numerical MethodsSTAT 3502 [0.5] Probability and StatisticsSYSC 3600 [0.5] Systems and SimulationELEC 3605 [0.5] Electrical EngineeringMAAE 3004 [0.5] Dynamics of MachineryMAAE 3202 [0.5] Mechanics of Solids IIMAAE 3400 [0.5] Applied ThermodynamicsMECH 3002 [0.5] Machine Design and PracticeMECH 3310 [0.5] Biofluid Mechanics


MECH 3710 [0.5] Biomaterials5. 0.5 credit from: 0.5

BIOL 2005 [0.5] Human PhysiologyBIOC 2200 [0.5] Cellular BiochemistryCHEM 2203 [0.5] Organic Chemistry I


SYSC 4201 [0.5] Ethics, Research Methodsand Standards for BiomedicalEngineering

ECOR 3800 [0.5] Engineering EconomicsECOR 4995 [0.5] Professional PracticeMAAE 4500 [0.5] Feedback Control SystemsMECH 4406 [0.5] Heat TransferMECH 4210 [0.5] BiomechanicsMECH 4013 [0.5] Biomedical Device Design

7. 1.0 credit in: 1.0MECH 4917 [1.0] Biomechanical Engineering Project

8. 0.5 credit in MAAE, MECH or AERO at the 4000-level,SYSC 4202 [0.5], SYSC 4203 [0.5]

0.5


Civil EngineeringBachelor of Engineering (21.5 credits)

81First year1. 4.5 credits in: 4.5






ERTH 2404 [0.5] Engineering GeoscienceMATH 2004 [0.5] Multivariable Calculus for

Engineering or PhysicsMATH 3705 [0.5] Mathematical Methods ICIVE 2004 [0.5] GIS, Surveying, and GraphicsCIVE 2101 [0.5] Mechanics IICIVE 2200 [0.5] Mechanics of Solids ICIVE 2700 [0.5] Civil Engineering MaterialsMAAE 2300 [0.5] Fluid Mechanics IMAAE 2400 [0.5] Thermodynamics & Heat TransferECOR 2606 [0.5] Numerical Methods

4. 0.5 credit in Complementary Studies Electives 0.5Third year5. 5.0 credits in: 5.0

STAT 2507 [0.5] Introduction to Statistical Modeling ICIVE 3202 [0.5] Mechanics of Solids IICIVE 3203 [0.5] Introduction to Structural AnalysisCIVE 3204 [0.5] Introduction to Structural DesignCIVE 3205 [0.5] Design of Structural Steel


ComponentsCIVE 3208 [0.5] Geotechnical MechanicsCIVE 3304 [0.5] Transportation Engineering and

PlanningECOR 3800 [0.5] Engineering EconomicsELEC 3605 [0.5] Electrical Engineering

6. 0.5 credit in Complementary Studies Electives 0.5Fourth year7. 3.0 credits in: 3.0

CIVE 4208 [0.5] Geotechnical EngineeringCIVE 4209 [0.5] Highway EngineeringCIVE 4407 [0.5] Municipal EngineeringCIVE 4918 [1.0] Design ProjectECOR 4995 [0.5] Professional Practice

8. 2.0 credits from: 2.0CIVE 4200 [0.5] Matrix Analysis of Framed

StructuresCIVE 4201 [0.5] Finite Element Methods in

Structural AnalysisCIVE 4202 [0.5] Wood EngineeringCIVE 4301 [0.5] Foundation EngineeringCIVE 4302 [0.5] Reinforced and Prestressed

Concrete DesignCIVE 4303 [0.5] Urban PlanningCIVE 4307 [0.5] Municipal HydraulicsCIVE 4308 [0.5] Behaviour and Design of Steel

StructuresCIVE 4400 [0.5] Construction/Project ManagementCIVE 4403 [0.5] Masonry DesignCIVE 4500 [0.5] Computer Methods in Civil

EngineeringCIVE 4614 [0.5] Building Fire SafetyCIVE 4907 [1.0] Engineering ProjectENVE 3003 [0.5] Water Resources Engineering


Civil Engineering with Concentration inManagementBachelor of Engineering (21.5 credits)

8AFirst year1. 4.5 credits in: 4.5




Wave MotionECOR 1010 [0.5] Introduction to Engineering

8 Engineering

ECOR 1101 [0.5] Mechanics IECOR 1606 [0.5] Problem Solving and ComputersCCDP 2100 [0.5] Communication Skills for


BUSI 1001 [0.5] Principles of Financial AccountingBUSI 1002 [0.5] Management AccountingERTH 2404 [0.5] Engineering GeoscienceMATH 2004 [0.5] Multivariable Calculus for

Engineering or PhysicsCIVE 2004 [0.5] GIS, Surveying, and GraphicsCIVE 2101 [0.5] Mechanics IICIVE 2200 [0.5] Mechanics of Solids ICIVE 2700 [0.5] Civil Engineering MaterialsMAAE 2300 [0.5] Fluid Mechanics IECOR 2606 [0.5] Numerical Methods


BUSI 2101 [0.5] Introduction to OrganizationalBehaviour

STAT 2507 [0.5] Introduction to Statistical Modeling ICIVE 3202 [0.5] Mechanics of Solids IICIVE 3203 [0.5] Introduction to Structural AnalysisCIVE 3204 [0.5] Introduction to Structural DesignCIVE 3205 [0.5] Design of Structural Steel


ComponentsCIVE 3208 [0.5] Geotechnical MechanicsCIVE 3304 [0.5] Transportation Engineering and

PlanningECOR 3800 [0.5] Engineering EconomicsELEC 3605 [0.5] Electrical Engineering


CIVE 4400 [0.5] Construction/Project ManagementECOR 4995 [0.5] Professional PracticeCIVE 4918 [1.0] Design ProjectSYSC 3200 [0.5] Industrial Engineering

6. 2.0 credits from: 2.0CIVE 4200 [0.5] Matrix Analysis of Framed

StructuresCIVE 4201 [0.5] Finite Element Methods in

Structural AnalysisCIVE 4202 [0.5] Wood EngineeringCIVE 4208 [0.5] Geotechnical EngineeringCIVE 4209 [0.5] Highway EngineeringCIVE 4301 [0.5] Foundation EngineeringCIVE 4302 [0.5] Reinforced and Prestressed

Concrete DesignCIVE 4303 [0.5] Urban PlanningCIVE 4307 [0.5] Municipal HydraulicsCIVE 4308 [0.5] Behaviour and Design of Steel

StructuresCIVE 4403 [0.5] Masonry DesignCIVE 4407 [0.5] Municipal Engineering

CIVE 4500 [0.5] Computer Methods in CivilEngineering

CIVE 4614 [0.5] Building Fire SafetyCIVE 4907 [1.0] Engineering ProjectENVE 3003 [0.5] Water Resources Engineering

7. 1.5 credits in: 1.5BUSI 2204 [0.5] Basic MarketingBUSI 3103 [0.5] Introduction to Organization TheoryBUSI 4105 [0.5] Managing Change

Total Credits 21.5

Communications EngineeringBachelor of Engineering (21.5 credits)








SYSC 2001 [0.5] Computer Systems FoundationsSYSC 2006 [0.5] Foundations of Imperative

ProgrammingELEC 2501 [0.5] Circuits and SignalsCCDP 2100 [0.5] Communication Skills for

Engineering StudentsMATH 3705 [0.5] Mathematical Methods ISYSC 2003 [0.5] Introductory Real-Time SystemsELEC 2507 [0.5] Electronics IELEC 2607 [0.5] Switching CircuitsSYSC 2004 [0.5] Object-Oriented Software

Development4. 0.5 credit in Basic Science Electives 0.5Third year5. 4.5 credits in: 4.5

STAT 2605 [0.5] Probability ModelsELEC 3509 [0.5] Electronics IIELEC 3500 [0.5] Digital ElectronicsELEC 3909 [0.5] Electromagnetic WavesSYSC 3503 [0.5] Communication Theory IISYSC 4602 [0.5] Computer CommunicationsECOR 3800 [0.5] Engineering EconomicsSYSC 3500 [0.5] Signals and SystemsSYSC 4502 [0.5] Communications Software

6. 0.5 credit in SYSC or ELEC at the 3000- or 4000-level 0.5Fourth year


7. 3.0 credits in: 3.0SYSC 4604 [0.5] Digital Communication TheorySYSC 4504 [0.5] Distributed Network ProcessingECOR 4995 [0.5] Professional PracticeSYSC 4700 [0.5] Telecommunications EngineeringSYSC 4701 [0.5] Communications Systems LabSYSC 4405 [0.5] Digital Signal Processing

8. 1.0 credit from: 1.0SYSC 4937 [1.0] Communications Engineering

ProjectELEC 4907 [1.0] Engineering Project

9. 1.0 credit in Communications Electives forCommunications Engineering

1.0

10. 0.5 credit in SYSC or ELEC at the 3000- or 4000-level 0.511. 0.5 credit in Complementary Studies Electives 0.5Total Credits 21.5

Note: For Item 8 above, students should register in SYSC4937 if their supervisor is in Systems and ComputerEngineering, or in ELEC 4907 if their supervisor is inElectronics.

Computer Systems EngineeringBachelor of Engineering (21.5 credits)




SciencePHYS 1003 [0.5] Introductory Mechanics and

ThermodynamicsPHYS 1004 [0.5] Introductory Electromagnetism and

Wave MotionECOR 1010 [0.5] Introduction to EngineeringECOR 1101 [0.5] Mechanics ISYSC 1005 [0.5] Introduction to Software

DevelopmentSYSC 2006 [0.5] Foundations of Imperative

ProgrammingSecond year2. 5.0 credits in: 5.0

CCDP 2100 [0.5] Communication Skills forEngineering Students


MATH 3705 [0.5] Mathematical Methods ISYSC 2001 [0.5] Computer Systems FoundationsSYSC 2003 [0.5] Introductory Real-Time SystemsSYSC 2004 [0.5] Object-Oriented Software

DevelopmentSYSC 2100 [0.5] Algorithms and Data StructuresELEC 2501 [0.5] Circuits and SignalsELEC 2507 [0.5] Electronics IELEC 2607 [0.5] Switching Circuits

3. 0.5 credit in Complementary Studies Electives 0.5


STAT 3502 [0.5] Probability and StatisticsECOR 3800 [0.5] Engineering EconomicsSYSC 3010 [0.5] Computer Systems Development

ProjectSYSC 3020 [0.5] Introduction to Software

EngineeringSYSC 3303 [0.5] Real-Time Concurrent SystemsSYSC 3501 [0.5] Communication TheorySYSC 3600 [0.5] Systems and SimulationSYSC 3601 [0.5] Microprocessor SystemsSYSC 4001 [0.5] Operating SystemsELEC 3500 [0.5] Digital Electronics


SYSC 4507 [0.5] Computer Systems ArchitectureSYSC 4602 [0.5] Computer CommunicationsSYSC 4805 [0.5] Computer Systems Design LabELEC 4705 [0.5] Electronic Materials, Devices and

Transmission MediaECOR 4995 [0.5] Professional Practice

6. 1.0 credit from: 1.0SYSC 4907 [1.0] Engineering ProjectELEC 4907 [1.0] Engineering Project

7. 2.0 credits from: 2.0MECH 4503 [0.5] An Introduction to RoboticsECOR 2606 [0.5] Numerical Methods

or SYSC or ELEC at the 3000-level or above8. 0.5 credit in Complementary Studies Electives 0.5Total Credits 21.5

Note: For Item 6 above, students should register in SYSC4907 if their supervisor is in Systems and ComputerEngineering, and in ELEC 4907 if their supervisor is inElectronics.

Electrical EngineeringBachelor of Engineering (21.5 credits)








ECOR 2606 [0.5] Numerical Methods

10 Engineering

ELEC 2501 [0.5] Circuits and SignalsSYSC 2006 [0.5] Foundations of Imperative

ProgrammingMATH 3705 [0.5] Mathematical Methods ISYSC 2004 [0.5] Object-Oriented Software

DevelopmentELEC 2507 [0.5] Electronics IELEC 2607 [0.5] Switching CircuitsCCDP 2100 [0.5] Communication Skills for

Engineering Students4. 0.5 credit in Complementary Studies 0.55. 0.5 credit in Basic Science Electives 0.5Third year6. 5.0 credits in: 5.0

SYSC 3600 [0.5] Systems and SimulationELEC 3509 [0.5] Electronics IIELEC 3500 [0.5] Digital ElectronicsELEC 3908 [0.5] Physical ElectronicsELEC 3105 [0.5] Basic EM and Power EngineeringSTAT 3502 [0.5] Probability and StatisticsSYSC 3006 [0.5] Computer OrganizationSYSC 3501 [0.5] Communication TheoryELEC 3909 [0.5] Electromagnetic WavesELEC 3907 [0.5] Engineering Project


ECOR 3800 [0.5] Engineering EconomicsECOR 4995 [0.5] Professional PracticeELEC 4601 [0.5] Microprocessor Systems

8. 1.0 credit from: 1.0ELEC 4907 [1.0] Engineering ProjectSYSC 4907 [1.0] Engineering Project

9. 3.0 credits from: 3.0MECH 4503 [0.5] An Introduction to RoboticsSYSC 3100 [0.5] Systems Analysis and DesignSYSC 3200 [0.5] Industrial Engineering

or ELEC OR SYSC at the 4000-level10. 0.5 credit from: 0.5Science Electives for Engineering, orENVE, CIVE, IDES, MAAE, AERO, MECH at the 2000-level or above, or

MECH 4503 [0.5] An Introduction to RoboticsSYSC 3020 [0.5] Introduction to Software

EngineeringSYSC 3200 [0.5] Industrial Engineering

or any ELEC or SYSC at the 4000-level

Total Credits 21.5

Note: For Item 8 above, students should register in ELEC4907 if their supervisor is in Electronics, and in SYSC4907 if their supervisor is in Systems and ComputerEngineering.

Engineering PhysicsBachelor of Engineering (21.5 credits)

8GFirst year1. 4.5 credits in: 4.5




SciencePHYS 1001 [0.5] Foundations of Physics IPHYS 1002 [0.5] Foundations of Physics IIECOR 1606 [0.5] Problem Solving and ComputersELEC 1908 [0.5] First Year Project



MATH 3705 [0.5] Mathematical Methods IPHYS 2202 [0.5] Wave Motion and OpticsPHYS 2604 [0.5] Modern Physics ISYSC 2006 [0.5] Foundations of Imperative

ProgrammingSYSC 2004 [0.5] Object-Oriented Software

DevelopmentECOR 2606 [0.5] Numerical MethodsELEC 2501 [0.5] Circuits and SignalsELEC 2507 [0.5] Electronics IELEC 2607 [0.5] Switching Circuits


STAT 3502 [0.5] Probability and StatisticsPHYS 3606 [0.5] Modern Physics IIPHYS 3701 [0.5] Elements of Quantum MechanicsPHYS 3807 [0.5] Mathematical Physics ISYSC 3501 [0.5] Communication TheoryELEC 3105 [0.5] Basic EM and Power EngineeringELEC 3500 [0.5] Digital ElectronicsELEC 3509 [0.5] Electronics IIELEC 3908 [0.5] Physical ElectronicsELEC 3909 [0.5] Electromagnetic WavesSYSC 3600 [0.5] Systems and Simulation


PHYS 4007 [0.5] Fourth-Year Physics Laboratory:Selected Experiments andSeminars

PHYS 4707 [0.5] Introduction to Quantum MechanicsI

ECOR 3800 [0.5] Engineering EconomicsECOR 4995 [0.5] Professional PracticeELEC 4908 [1.0] Engineering Physics Project

6. 1.0 credit in PHYS at the 4000-level, which mustinclude one of:

1.0


PHYS 4203 [0.5] Physical Applications of FourierAnalysis

PHYS 4208 [0.5] Modern OpticsPHYS 4409 [0.5] Thermodynamics and Statistical

PhysicsPHYS 4508 [0.5] Solid State PhysicsPHYS 4807 [0.5] Computational Physics

7. 1.0 credit in ELEC at the 4000-level, which mustinclude one of:

1.0

ELEC 4503 [0.5] Radio Frequency Lines andAntennas

ELEC 4505 [0.5] Telecommunication CircuitsELEC 4506 [0.5] CAD for Communication CircuitsELEC 4601 [0.5] Microprocessor SystemsELEC 4609 [0.5] Integrated Circuit Design and

FabricationELEC 4700 [0.5] The Physics and Modeling

of Advanced Devices andTechnologies

ELEC 4502 [0.5] Microwave CircuitsELEC 4509 [0.5] Communication LinksELEC 4702 [0.5] Fiber Optic CommunicationsELEC 4706 [0.5] Digital Integrated ElectronicsELEC 4707 [0.5] Analog Integrated ElectronicsELEC 4708 [0.5] Advanced Digital Integrated Circuit

Design8. 1.0 credit in Complementary Studies Electives 1.0Total Credits 21.5

Environmental EngineeringBachelor of Engineering (21.0 credits)






Engineering StudentsSecond year2. 5.0 credits in: 5.0

CHEM 2800 [0.5] Foundations for EnvironmentalChemistry

ERTH 2404 [0.5] Engineering GeoscienceMATH 2004 [0.5] Multivariable Calculus for

Engineering or PhysicsENVE 2001 [0.5] Process Analysis for Environmental

EngineeringBIOL 1003 [0.5] Introductory Biology IBIOL 1004 [0.5] Introductory Biology II

CIVE 2200 [0.5] Mechanics of Solids IMAAE 2300 [0.5] Fluid Mechanics IMAAE 2400 [0.5] Thermodynamics & Heat TransferECOR 2606 [0.5] Numerical Methods


CHEM 3800 [0.5] The Chemistry of EnvironmentalPollutants

ENVE 3001 [0.5] Water Treatment Principles andDesign

ENVE 3002 [0.5] Environmental EngineeringSystems Modeling

ENVE 3003 [0.5] Water Resources EngineeringENVE 3004 [0.5] Contaminant and Pollutant

Transport in the EnvironmentCIVE 2700 [0.5] Civil Engineering MaterialsCIVE 3208 [0.5] Geotechnical MechanicsCIVE 4307 [0.5] Municipal HydraulicsECOR 3800 [0.5] Engineering EconomicsSTAT 2507 [0.5] Introduction to Statistical Modeling I


ENVE 4003 [0.5] Air Pollution and Emissions ControlENVE 4005 [0.5] Wastewater Treatment Principles

and DesignENVE 4006 [0.5] Contaminant HydrogeologyENVE 4101 [0.5] Waste ManagementENVE 4104 [0.5] Environmental Planning and Impact

AssessmentENVE 4918 [1.0] Design ProjectECOR 4995 [0.5] Professional Practice

5. 1.0 credit from: 1.0ENVE 4002 [0.5] Environmental Geotechnical

EngineeringENVE 4105 [0.5] Green Building DesignENVE 4106 [0.5] Indoor Air QualityENVE 4907 [1.0] Engineering ProjectCIVE 3304 [0.5] Transportation Engineering and

PlanningCIVE 4208 [0.5] Geotechnical EngineeringCIVE 4301 [0.5] Foundation EngineeringCIVE 4303 [0.5] Urban PlanningCIVE 4400 [0.5] Construction/Project ManagementMECH 4401 [0.5] Power Plant AnalysisMECH 4403 [0.5] Power Generation SystemsMECH 4406 [0.5] Heat TransferMECH 4407 [0.5] Heating & Air ConditioningSYSC 3200 [0.5] Industrial EngineeringSREE 3001 [0.5] Sustainable and Renewable

Energy SourcesSREE 4002 [0.5] The Energy Economy, Reliability

and Risk6. 1.0 credit in Complementary Studies Electives 1.0Total Credits 21.0

Note: For Item 1 above and students transferring intoEnvironmental Engineering, students in good standingand who have successfully completed CHEM 1101 whileregistered in another engineering program may replace

12 Engineering

CHEM 1001 and CHEM 1002 with CHEM 1101 plus one0.5 credit either from the Basic Science Electives forEngineering or the Science Electives for Engineering or inAERO, CIVE, ELEC, IDES, MAAE, MECH or SYSC at the2000-level or above.

Mechanical EngineeringBachelor of Engineering (21.5 credits)










STAT 3502 [0.5] Probability and StatisticsMAAE 3004 [0.5] Dynamics of MachineryMAAE 3202 [0.5] Mechanics of Solids IIMAAE 3300 [0.5] Fluid Mechanics IIMAAE 3400 [0.5] Applied ThermodynamicsMAAE 3901 [0.5] Mech & Aero Engineering LabMECH 3002 [0.5] Machine Design and PracticeMECH 3700 [0.5] Principles of ManufacturingSYSC 3600 [0.5] Systems and SimulationELEC 3605 [0.5] Electrical Engineering


MAAE 4500 [0.5] Feedback Control SystemsMAAE 4102 [0.5] Materials: Strength & FractureMECH 4003 [0.5] Mechanical Systems DesignMECH 4406 [0.5] Heat TransferMECH 4907 [1.0] Engineering ProjectECOR 3800 [0.5] Engineering Economics

ECOR 4995 [0.5] Professional Practice7. 2.0 credits from: 2.0

ELEC 4504 [0.5] Avionics SystemsMECH, AERO, MAAE at the 4000-level

Total Credits 21.5

Mechanical Engineering with Concentration inIntegrated ManufacturingBachelor of Engineering (22.0 credits)

8L1First year1. 4.0 credits in: 4.0









STAT 3502 [0.5] Probability and StatisticsMAAE 3004 [0.5] Dynamics of MachineryMAAE 3202 [0.5] Mechanics of Solids IIMAAE 3300 [0.5] Fluid Mechanics IIMAAE 3400 [0.5] Applied ThermodynamicsMAAE 3901 [0.5] Mech & Aero Engineering LabMECH 3002 [0.5] Machine Design and PracticeMECH 3700 [0.5] Principles of ManufacturingSYSC 3200 [0.5] Industrial EngineeringSYSC 3600 [0.5] Systems and SimulationELEC 3605 [0.5] Electrical Engineering


MAAE 4500 [0.5] Feedback Control SystemsMAAE 4102 [0.5] Materials: Strength & FractureECOR 4995 [0.5] Professional PracticeMECH 4003 [0.5] Mechanical Systems Design


MECH 4406 [0.5] Heat TransferMECH 4907 [1.0] Engineering ProjectECOR 3800 [0.5] Engineering Economics

7. 1.5 credits from: 1.5MECH 4501 [0.5] State Space Modeling & ControlMECH 4503 [0.5] An Introduction to RoboticsMECH 4604 [0.5] Finite Element MethodsMECH 4704 [0.5] Integrated Manufacturing - CIMSMECH 4705 [0.5] CAD/CAMMECH 4805 [0.5] Measurement and Data SystemsMECH 4806 [0.5] Mechatronics

8. 0.5 credit in: 0.5MECH, AERO, MAAE at the 4000-level, or

ELEC 4504 [0.5] Avionics Systems

Total Credits 22.0

Software EngineeringBachelor of Engineering (21.5 credits)

8PFirst year1. 5.0 credits in: 5.0

CHEM 1101 [0.5] Chemistry for Engineering StudentsECOR 1010 [0.5] Introduction to EngineeringECOR 1101 [0.5] Mechanics IMATH 1004 [0.5] Calculus for Engineering or PhysicsMATH 1005 [0.5] Differential Equations and Infinite


SciencePHYS 1003 [0.5] Introductory Mechanics and

ThermodynamicsPHYS 1004 [0.5] Introductory Electromagnetism and

Wave MotionSYSC 1005 [0.5] Introduction to Software

DevelopmentSYSC 2006 [0.5] Foundations of Imperative

ProgrammingSecond year2. 4.5 credits in: 4.5



COMP 1805 [0.5] Discrete Structures ISYSC 2001 [0.5] Computer Systems FoundationsSYSC 2003 [0.5] Introductory Real-Time SystemsSYSC 2004 [0.5] Object-Oriented Software

DevelopmentSYSC 2100 [0.5] Algorithms and Data StructuresELEC 2501 [0.5] Circuits and SignalsELEC 2607 [0.5] Switching Circuits

3. 1.0 credit in Complementary Studies Electives 1.0Third year4. 4.5 credits in: 4.5

COMP 3005 [0.5] Database Management SystemsECOR 3800 [0.5] Engineering EconomicsSYSC 3110 [0.5] Software Development ProjectSYSC 3101 [0.5] Programming Languages

SYSC 3120 [0.5] Software RequirementsEngineering

SYSC 3303 [0.5] Real-Time Concurrent SystemsSYSC 4001 [0.5] Operating SystemsSYSC 4106 [0.5] Software Product ManagementSTAT 3502 [0.5] Probability and Statistics

5. 0.5 credit from: 0.5ELEC 2507 [0.5] Electronics ISYSC 3200 [0.5] Industrial EngineeringSYSC 3600 [0.5] Systems and SimulationSYSC 3601 [0.5] Microprocessor SystemsSYSC 4102 [0.5] Performance EngineeringSYSC 4502 [0.5] Communications SoftwareSYSC 4504 [0.5] Distributed Network ProcessingSYSC 4602 [0.5] Computer CommunicationsELEC 4708 [0.5] Advanced Digital Integrated Circuit

DesignELEC 4509 [0.5] Communication LinksELEC 4506 [0.5] CAD for Communication Circuits


ECOR 4995 [0.5] Professional PracticeSYSC 4101 [0.5] Software ValidationSYSC 4005 [0.5] Discrete Simulation/ModelingSYSC 4120 [0.5] Modelling Software DesignSYSC 4507 [0.5] Computer Systems ArchitectureSYSC 4806 [0.5] Software Engineering LabELEC 4705 [0.5] Electronic Materials, Devices and

Transmission Media7. 1.0 credit in: 1.0

SYSC 4927 [1.0] Software Engineering Project8. 1.0 credit from the list in Item 5 1.09. 0.5 credit from the list in Item 5, or from: 0.5

SYSC 4105 [0.5] Engineering ManagementSYSC 4107 [0.5] Software BusinessCOMP 3002 [0.5] Compiler ConstructionCOMP 4000 [0.5] Distributed Operating SystemsCOMP 4001 [0.5] Distributed ComputingCOMP 4002 [0.5] Real-Time 3D Game EnginesCOMP 4003 [0.5] Transaction Processing SystemsCOMP 4106 [0.5] Artificial Intelligence

Total Credits 21.5

Sustainable and Renewable Energy Stream A:Smart Technologies for Power Generation andDistributionBachelor of Engineering (21.5 credits)First year1. 4.5 credits in: 4.5




Wave MotionECOR 1010 [0.5] Introduction to EngineeringECOR 1101 [0.5] Mechanics I

14 Engineering

ECOR 1606 [0.5] Problem Solving and ComputersCHEM 1101 [0.5] Chemistry for Engineering StudentsCCDP 2100 [0.5] Communication Skills for

Engineering Students2. 0.5 credit in Complementary Studies Electives 0.53. Successful completion of: 0.0

SREE 1000 [0.0] Introduction to Sustainable EnergySecond year4. 5.0 credits in: 5.0


MATH 3705 [0.5] Mathematical Methods IMAAE 2300 [0.5] Fluid Mechanics IMAAE 2400 [0.5] Thermodynamics & Heat TransferENVE 2001 [0.5] Process Analysis for Environmental

EngineeringELEC 2501 [0.5] Circuits and SignalsELEC 2507 [0.5] Electronics IECOR 2606 [0.5] Numerical MethodsSYSC 2006 [0.5] Foundations of Imperative

ProgrammingELEC 2607 [0.5] Switching Circuits


STAT 3502 [0.5] Probability and StatisticsSYSC 3200 [0.5] Industrial EngineeringSYSC 3600 [0.5] Systems and SimulationSYSC 3006 [0.5] Computer OrganizationMAAE 3400 [0.5] Applied ThermodynamicsELEC 4602 [0.5] Electrical Power EngineeringSREE 3001 [0.5] Sustainable and Renewable

Energy SourcesSREE 3002 [0.5] Energy Distribution and Efficient

UtilizationSREE 3003 [0.5] Sustainable Energy Systems

DesignELEC 3508 [0.5] Power Electronics


SYSC 4505 [0.5] Automatic Control Systems ISYSC 4602 [0.5] Computer CommunicationsENVE 4003 [0.5] Air Pollution and Emissions ControlECOR 3800 [0.5] Engineering EconomicsECOR 4995 [0.5] Professional PracticeSREE 4001 [0.5] Efficient Energy ConversionSREE 4002 [0.5] The Energy Economy, Reliability

and RiskELEC 4703 [0.5] Solar Cells

8. 1.0 credit in: 1.0SREE 4907 [1.0] Energy Engineering Project

9. 0.5 credit in any 3000-level or 4000-level Engineeringcourse for which prerequisites have been satisfied

0.5

10. 0.5 credit in any 4000-level Engineering course forwhich prerequisites have been satisfied

0.5

Total Credits 21.5

Sustainable and Renewable Energy Stream B:Efficient Energy Generation and ConversionBachelor of Engineering (21.5 credits)

951BFirst year1. 4.5 credits in: 4.5




Wave MotionECOR 1010 [0.5] Introduction to EngineeringECOR 1101 [0.5] Mechanics IECOR 1606 [0.5] Problem Solving and ComputersCHEM 1101 [0.5] Chemistry for Engineering StudentsCCDP 2100 [0.5] Communication Skills for

Engineering Students2. 0.5 credit in Complementary Studies Electives 0.53. Successful completion of: 0.0

SREE 1000 [0.0] Introduction to Sustainable EnergySecond year4. 5.0 credits in: 5.0


MATH 3705 [0.5] Mathematical Methods IMAAE 2300 [0.5] Fluid Mechanics IMAAE 2400 [0.5] Thermodynamics & Heat TransferENVE 2001 [0.5] Process Analysis for Environmental

EngineeringELEC 3605 [0.5] Electrical EngineeringMAAE 2101 [0.5] Engineering DynamicsECOR 2606 [0.5] Numerical MethodsMAAE 2001 [0.5] Engineering Graphical DesignELEC 2607 [0.5] Switching Circuits


STAT 3502 [0.5] Probability and StatisticsSYSC 3200 [0.5] Industrial EngineeringSYSC 3600 [0.5] Systems and SimulationMAAE 2700 [0.5] Engineering MaterialsMAAE 3300 [0.5] Fluid Mechanics IIMAAE 3400 [0.5] Applied ThermodynamicsELEC 4602 [0.5] Electrical Power EngineeringSREE 3001 [0.5] Sustainable and Renewable

Energy SourcesSREE 3002 [0.5] Energy Distribution and Efficient

UtilizationSREE 3003 [0.5] Sustainable Energy Systems

DesignFourth year7. 4.0 credits in: 4.0

MAAE 4500 [0.5] Feedback Control SystemsENVE 4003 [0.5] Air Pollution and Emissions ControlECOR 3800 [0.5] Engineering EconomicsECOR 4995 [0.5] Professional Practice


MECH 4406 [0.5] Heat TransferSREE 4001 [0.5] Efficient Energy ConversionSREE 4002 [0.5] The Energy Economy, Reliability

and RiskMECH 4408 [0.5] Thermofluids and Energy Systems

Design8. 1.0 credit in: 1.0

SREE 4907 [1.0] Energy Engineering Project9. 0.5 credit in any 3000-level or 4000-level Engineeringcourse for which prerequisites have been satisfied

0.5

10. 0.5 credit in any 4000-level Engineering course forwhich prerequisites have been satisfied

0.5

Total Credits 21.5

Aerospace Engineering (AERO) Courses

Mechanical & Aerospace Eng.

Faculty of Engineering & DesignAERO 3002 [0.5 credit]Aerospace Design and PracticeDesign approach and phases. Design integration.Influence of mission and other requirements on vehicleconfiguration. Trade-off studies, sizing and configurationlayout. Flight vehicle loads, velocity-load factor diagram.Structural design: overall philosophy, role in designprocess, methods.Prerequisite(s): MAAE 2001 and third-year status inEngineering.Lectures three hours a week, problem analysis three hoursa week.

AERO 3101 [0.5 credit]Lightweight StructuresStructural concepts; theory of elasticity; bending, torsionand shear in thin-walled beams having single or multi-cellsections; work and energy principles; deformation andforce analysis of advanced structures, including stiffenedthin-wall panels; finite element methods. Stability andbuckling of thin-walled structures.Prerequisite(s): MAAE 3202.Lectures three hours a week; problem analysis andlaboratories one hour a week.

AERO 3240 [0.5 credit]Orbital MechanicsReview of rigid body dynamics, orbital elements, Kepleriantwo-body problem, orbit transfers,rendezvous, time of flight, interplanetary trajectories,manoeuvres (flyby, capture). Orbit determination andperturbations. Advanced topics: restricted three bodyproblem, Lagrange’s planetary equations.Prerequisite(s): MAAE 2101.Lectures three hours per week, tutorial one hour per week.

AERO 3700 [0.5 credit]Aerospace MaterialsProperties, behaviour and manufacturing methods formetals, polymers and ceramics used in aerospaceapplications. Specialty alloys for gas turbines. Propertiesand manufacture of aerospace composites. Behaviour ofmaterials in space.Prerequisite(s): MAAE 2700.Lectures three hours a week; problem analysis andlaboratories one hour a week.

AERO 3841 [0.5 credit]Spacecraft DesignDesign of spacecraft and spacecraft subsystems withemphasis on mission requirements and current designmethods: spacecraft configuration, payload, structural,attitude control, thermal, power, and other relatedsubsystems. Spacecraft integration and testing.Precludes additional credit for AERO 4801.Prerequisite(s): MAAE 2001 and and AERO 3240.Lectures three hours a week, tutorials or laboratories threehours per week.

AERO 4003 [0.5 credit]Aerospace Systems DesignStress and deflection analysis; fatigue, safe life, damagetolerant design. Propulsion systems integration; landinggear; control and other subsystems. Mechanicalcomponent design. Airworthiness regulations andcertification procedures. Weight and cost estimation andcontrol. System reliability. Design studies of aircraft orspacecraft components.Prerequisite(s): MAAE 3202 and AERO 3002.Lectures three hours a week, problem analysis three hoursa week.

AERO 4009 [0.5 credit]Aviation Management and CertificationProduct development, quality control. Strategicorganizational analysis and design. Airworthiness, typecertification and planning, delegation of authority, airplaneflight manual. Aerospace system design and safety.Prerequisite(s): fourth-year status in Engineering.Lectures three hours per week.

AERO 4300 [0.5 credit]Acoustics and Noise ControlBehaviour of compressible fluids, sound waves andproperties of sound sources; measurement of sound;human perception of sound; prediction methods basedon energy considerations; sound propagation in realisticenvironments: outdoors, rooms, ducts; absorption andtransmission loss, noise control; case studies.Prerequisite(s): MATH 3705 and fourth-year status inEngineering.Lectures three hours a week.

16 Engineering

AERO 4302 [0.5 credit]Aerodynamics & Heat TransferDifferential equations of motion. Viscous and inviscidregions. Potential flow: superposition; thin airfoils; finitewings; compressibility corrections. Viscous flow: thinshear layer approximation; laminar layers; transition;turbulence modeling. Convective heat transfer: free versusforced convection; energy and energy integral equations;turbulent diffusion.Prerequisite(s): MAAE 3300.Also offered at the graduate level, with differentrequirements, as MECH 5000, for which additional credit isprecluded.Lectures three hours a week.

AERO 4304 [0.5 credit]Computational Fluid DynamicsDifferential equations of motion. Numerical integrationof ordinary differential equations. Potential flows: panelmethods; direct solution; vortex-lattice methods. Finite-difference formulations: explicit versus implicit methods;stability. Parabolized and full Navier-Stokes equations;conservation form. Transonic and supersonic flows:upwind differencing. Grid transformations. Computer-based assignments.Prerequisite(s): AERO 4302.Lectures three hours a week.

AERO 4306 [0.5 credit]Aerospace Vehicle PerformanceMorphology of aircraft and spacecraft. Performanceanalysis of fixed wing aircraft: drag estimation, propulsion,take-off, climb and landing, endurance, payload/range,manoeuvres; operational economics. Performanceanalysis of rotor craft: rotor-blade motion, hovering andvertical ascent, forward flight, and autorotation. Rocketpropulsion; escape velocity; orbital dynamics.Prerequisite(s): MAAE 3300.Lectures three hours a week.

AERO 4308 [0.5 credit]Aircraft Stability & ControlStatic stability and control: equilibrium requirements;longitudinal stability requirements; neutral points;manoeuvering flight; control forces and controlrequirements; lateral static stability certificationrequirements. Dynamic stability: axis systems; governingequations; phugoid and short period modes; lateraldynamic modes. Closed-loop control.Prerequisite(s): MAAE 3300 and MAAE 4500 or MAAE3502 (taken before 1999-2000).Also offered at the graduate level, with differentrequirements, as MECH 5101, for which additional credit isprecluded.Lectures three hours a week.

AERO 4402 [0.5 credit]Aerospace PropulsionPropulsion requirements, effects of Mach Number,altitude, and application; basic propeller theory; propeller,turboshaft, turbojet, turbofan and rocket; cycle analysisand optimization for gas turbine power plant; inter-relationsbetween thermodynamic, aerodynamic and mechanicaldesigns; rocket propulsion; selection of aeroengines.Precludes additional credit for MECH 4401.Prerequisite(s): MAAE 2400 and MAAE 3300.Lectures three hours a week.

AERO 4442 [0.5 credit]Transatmospheric and Spacecraft PropulsionPlanetary/interplanetary environments and effects. Launchand spacecraft propulsion: liquid/solid/hybrid rockets,ram/scramjets, combined cycle engines, electrothermal,electromagnetic, electrostatic, nuclear, and propellantlesspropulsion. Trajectory analysis, multi-staging, separationdynamics. Advanced engine concepts.Prerequisite(s): AERO 4302 or AERO 4446 or MECH4406.Lectures three hours a week.

AERO 4446 [0.5 credit]Heat Transfer for Aerospace ApplicationsFundamentals of heat transfer with emphasis onaerospace systems design. Conduction, convection andradiation modes of heat transfer. Radiation exchangebetween surfaces and view factors. Radiation inspacecraft thermal control. High speed flight and reentryheating.Precludes additional credit for MECH 4406.Prerequisite(s): MAAE 2400, MAAE 3300.Lectures three hours a week.

AERO 4540 [0.5 credit]Spacecraft Dynamics and ControlRigid body dynamics. The dynamic behavior of spacecraft.Environmental torques. The design of attitude controlsystems. Gravity gradient, spin, and dual spin stabilization.Attitude manoeuvres. The design of automatic controlsystems. Impacts of attitude stabilization techniques onmission performance.Prerequisite(s): MATH 3705, AERO 3240 and SYSC 3600.Lectures three hours a week.

AERO 4602 [0.5 credit]Introductory AeroelasticityReview of structural behaviour of lifting surface elements;structural dynamics, Laplace Transforms, dynamicstability; modal analysis; flutter, Theodorsen’s theory;flutter of a typical section; wing flutter, T-tail flutter,propeller whirl flutter; gust response; buffeting, limit cycleflutter.Prerequisite(s): MAAE 3004, MAAE 3300 and SYSC 3600.Lectures three hours a week.


AERO 4607 [0.5 credit]Rotorcraft Aerodynamics & PerformanceRotorcraft history and fundamentals. Momentum theory:hover, axial climb and descent, autorotation, forward flight,momentum theory for coaxial and tandem rotors. Bladeelement analysis. Rotor airfoil aerodynamics. Rotor bladedynamics and trim. Helicopter performance, height-velocitycurves, conceptual design. High-speed rotorcraft.Prerequisite(s): MAAE 3300 and MAAE 3004.Lectures three hours per week.

AERO 4608 [0.5 credit]Composite MaterialsReinforcing mechanisms in composite materials; materialproperties. Strength and elastic constants of unidirectionalcomposites; failure criteria. Analysis of laminated plates;bending and eigenvalue problems. Environmental effectsand durability. Damage tolerance. Design of compositestructures.Prerequisite(s): MAAE 3202.Lectures three hours a week.

AERO 4609 [0.5 credit]Joining of MaterialsDesign for joining: base material and componentgeometry. Selection of joining method and filler material;Adhesive bonding; Soldering; Brazing; Diffusion bonding;Resistance welding; Fusion welding (GTAW, EB, laserand plasma arc); Friction welding; NDE. Emphasis onAerospace materials and applications.Prerequisite(s): AERO 3700 or MECH 3700.Lectures three hours per week.

AERO 4801 [0.5 credit]Spacecraft DesignTypes of spacecraft. Fundamentals of orbital mechanics.The design of spacecraft and spacecraft subsystemswith emphasis on mission requirements and currentdesign methods: spacecraft configuration, payload,structural, propulsion, attitude control, thermal, power,communication and other related subsystems. Spacecraftintegration and testing.Precludes additional credit for AERO 3841.Prerequisite(s): AERO 3002 or MECH 3002.Lectures three hours a week.

AERO 4802 [0.5 credit]Space Mission Analysis and DesignHistory of space exploration. Review of solar system.Space mission design. Space mission geometry. Spacemission analysis: orbit design, orbit transfers andinterplanetary trajectories. Space environment and itseffect on spacecraft design. Space propulsion and launchvehicle design. Launch sequence, launch windows andlaunch cost. Reusable launch systems.Precludes additional credit for AERO 4842, MAAE 4906B(1994-2004 inclusive), MECH 5802 (2002-2004 inclusive),MECH 5700 Section "L" (1994-1997 inclusive), MECH5805 (1999-2002 inclusive).Prerequisite(s): AERO 3002 or MECH 3002.Also offered at the graduate level, with differentrequirements, as MECH 5106, for which additional credit isprecluded.

AERO 4842 [0.5 credit]Space Mission DesignSpace mission elements. System view of spacecraft.Requirements definition. Space mission geometry. Orbitselection. Space environment and its effect on spacecraftdesign. Launch vehicle design and selection. Missionoperations. Space systems design examples.Precludes additional credit for AERO 4802.Prerequisite(s): AERO 3841.Lectures three hours a week, tutorials or laboratories onehour per week.

AERO 4907 [1.0 credit]Aerospace Engineering ProjectParticipation in team projects dealing with design anddevelopment of an aerospace vehicle or system. Oneor more such projects will be undertaken each year.Opportunities to exercise initiative, engineering judgment,self-reliance and creativity, in a team environment similarto industry. Oral presentations and reports.Prerequisite(s): Completion of or concurrent registrationin AERO 4003 or AERO 4842, and fourth-year status inEngineering.

Civil Engineering (CIVE) Courses

Civil & Environmental Eng.

Faculty of Engineering & DesignCIVE 2004 [0.5 credit]GIS, Surveying, and GraphicsEngineering geometry and spatial graphics. Structuralengineering drawings and computer aided drafting.Fundamentals of surveying, measuring horizontaland vertical distances and angles. Topographic andconstruction surveys. GPS and electronic surveying.Geographic information systems, data, data structure andprocessing, spatial referencing, cartographic modeling,application software.Precludes additional credit for CIVE 1004.Lectures three hours a week, problem analysis andlaboratories three hours a week.

18 Engineering

CIVE 2005 [0.5 credit]Architectural Technology 2Technical issues involved in architectural designof buildings from ancient times to the present.Technological innovation and materials related to structuraldevelopments, and the organization and design ofstructures. Basic concepts of calculus, equilibrium, andmechanics of materials.Precludes additional credit for CIVE 1005.Prerequisite(s): ARCC 2202.Lectures three hours a week, laboratory three hours aweek.

CIVE 2101 [0.5 credit]Mechanics IIPlane trusses. Virtual work. Friction. Relative motion ofparticles. Kinematics of a rigid body: translation, rotation;general plane motion; absolute and relative motion.Kinetics of a rigid body: equations of motion; work-energy;impulse-momentum; conservation of momentum andenergy. Conservative forces and potential energy.Precludes additional credit for MAAE 2101 and ECOR2101.Prerequisite(s): ECOR 1101 and MATH 1004 and MATH1104.Lectures three hours a week, problem analysis three hoursa week.

CIVE 2200 [0.5 credit]Mechanics of Solids IStress and strain. Stress-strain relationship: Hooke’slaw. Torsion of circular shafts. Bending moment andshear force distribution. Flexural stresses. Deflection.Shear stress in beams. Stresses in thin- walled cylinders.Transformation of 2D stress and strain: Mohr’s circle.Buckling of columns.Precludes additional credit for MAAE 2202.Prerequisite(s): ECOR 1101 for B.Eng. students or CIVE2005 for B.A.S. with Concentration in Conservation andSustainability.Lectures three hours a week, problem analysis andlaboratory three hours a week.

CIVE 2700 [0.5 credit]Civil Engineering MaterialsIntroduction to material science. Structure of atoms.Crystallography. Crystal Imperfections. Characteristics,behaviour and use of Civil Engineering materials:steel, concrete, asphalt, wood, polymers, composites.Specifications. Physical, chemical and mechanicalproperties. Quality control and material tests. Fatigue.Corrosion. Applications in construction and rehabilitation ofstructures.Prerequisite(s): CHEM 1002 or CHEM 1101 or equivalent,MATH 1004. Recommended prerequisite: PHYS 1004.Lectures three hours a week, problem analysis andlaboratory three hours a week.

CIVE 3202 [0.5 credit]Mechanics of Solids IIShear flow. Definition of shear centre, Saint Venantand warping torsional constants. Behaviour, governingdifferential equations and solutions for torsion, beam-columns, lateral torsional buckling of doubly symmetricbeams, axially loaded doubly symmetric, singly symmetricand asymmetric columns. Failure criterion, fatigue andfracture.Precludes additional credit for MAAE 3202.Prerequisite(s): CIVE 2200.Lectures three hours a week, laboratory/problem analysisthree hours alternate weeks.

CIVE 3203 [0.5 credit]Introduction to Structural AnalysisConcepts and assumptions for structural analysis:framed structures; joints; supports; compatibility andequilibrium; stability and determinacy; generalized forcesand displacements. Principle of Virtual Work: unknownforce calculations; influence lines. Complementary VirtualWork: displacement calculations, indeterminate analysis.Introduction to the Stiffness Method of Analysis.Prerequisite(s): CIVE 2200 and MATH 1004.Lectures three hours a week, problem analysis three hoursalternate weeks.

CIVE 3204 [0.5 credit]Introduction to Structural DesignBuilding systems and structural form. Design Philosophyand design process. Limit states design. National BuildingCode of Canada. Determination of dead, live, snow, wind,and earthquake loads.Prerequisite(s): CIVE 2200 (concurrent).Lectures three hours a week, problem analysis three hoursalternate weeks.

CIVE 3205 [0.5 credit]Design of Structural Steel ComponentsIntroduction to CAN/CSA - S16, design and behaviourconcepts; shear lag, block shear, local plate buckling,lateral torsional buckling, instantaneous centre, inelasticstrength and stability. Design of tension members, axiallyloaded columns, beams, beam-columns, simple boltedand welded connections.Prerequisite(s): CIVE 2200. Recommended prerequisite:CIVE 3204.Lectures three hours a week, problem analysis three hoursalternate weeks.


CIVE 3206 [0.5 credit]Design of Reinforced Concrete ComponentsIntroduction to CAN/CSA - A23.3; design and behaviourconcepts; flexural analysis at service loads; shear,bond, Whitney stress block, under and over reinforcedbehaviour, ultimate strength. Flexural design of singlyreinforced, doubly reinforced T-beams, and one-wayslabs. Shear design for beams. One-way and two-wayslab building systems, columns.Prerequisite(s): CIVE 2200. Recommended prerequisite:CIVE 3204.Lectures three hours a week, problem analysis three hoursalternate weeks.

CIVE 3207 [0.5 credit]Historic Site Recording and AssessmentMethods of heritage documentation including handrecording, photography, rectified photography, totalstation, gps, photogrammetry, and laser scanning. Non-destructive testing techniques; environmental assessmenttools for determining air quality and energy efficiency.Multidisciplinary teams for all project work.Also listed as ARCN 4100.Prerequisite(s): third-year status in B.Eng. in ArchitecturalConservation and Sustainability Engineering or third-yearstanding in B.A.S. Concentration in Conservation andSustainability.Lectures three hours a week, lab or field work two hours aweek.

CIVE 3208 [0.5 credit]Geotechnical MechanicsSoil composition and soil classification. Soil properties,compaction, seepage and permeability. Concepts ofpore water pressure, capillary pressure and hydraulichead. Principle of effective stress, stress-deformationand strength characteristics of soils, consolidation, stressdistribution with soils, and settlement. Laboratory testing.Also listed as ERTH 4107.Prerequisite(s): ERTH 2404 or equivalent and third-yearstatus in Engineering, or permission of the Department.Lectures three hours a week, laboratory three hoursalternate weeks.

CIVE 3304 [0.5 credit]Transportation Engineering and PlanningTransportation and the socio-economic environment;modal and intermodal systems and components; vehiclemotion, human factors, system and facility design;traffic flow; capacity analysis; planning methodology;environmental impacts; evaluation methods.Also listed as GEOG 4304.Prerequisite(s): third-year status in Engineering, orpermission of the Department.Lectures three hours a week, problem analysis three hoursalternate weeks.

CIVE 3999 [0.0 credit]Co-operative Work Term

CIVE 4200 [0.5 credit]Matrix Analysis of Framed StructuresReview of basic structural concepts. Betti’s law andapplications. Matrix flexibility method, flexibility influencecoefficients. Development of stiffness influencecoefficients. Stiffness method of analysis: beams;plane trusses and frames; space trusses and frames.Introduction to the finite element method.Prerequisite(s): CIVE 3203.Lectures three hours a week, problem analysis three hoursalternate weeks.

CIVE 4201 [0.5 credit]Finite Element Methods in Structural AnalysisIntroduction to theory of elasticity. Simple finite elements.Virtual Work formulation of equilibrium of structureand element. Lagrange interpolation and basis fordisplacement shape functions. Considerations in finiteelement modeling. Plate bending theories and analysis.Shell theories and analysis.Prerequisite(s): CIVE 4200.Also offered at the graduate level, with differentrequirements, as CIVE 5103, for which additional credit isprecluded.Lectures three hours a week, problem analysis three hoursalternate weeks.

CIVE 4202 [0.5 credit]Wood EngineeringStructural design in timber. Properties, anatomy of wood,wood products, factors affecting strength and behaviour,strength evaluation and testing. Design of columns, beamsand beam-columns. Design of trusses, frames, glulamstructures, plywood components, formwork, foundations,connections and connectors. Inspection, maintenance andrepair.Also listed as ARCC 4202.Prerequisite(s): fourth-year status in Engineering orpermission of the Department.Lectures three hours a week, problem analysis three hoursalternate weeks.

CIVE 4208 [0.5 credit]Geotechnical EngineeringStrength of soils, steady state seepage, flownets andpiping. Stress distribution in soils. Earth pressures: atrest, active and passive. Design of flexible and rigidretaining structures. Stability of excavations, slopesand embankments. Settlement of foundations. Bearingcapacity of footings.Prerequisite(s): CIVE 3208.Lectures three hours a week, problem analysis three hoursalternate weeks.

20 Engineering

CIVE 4209 [0.5 credit]Highway EngineeringHighway planning; highway location and geometric design;traffic engineering; highway capacity; soil classifications;subgrade and base materials; highway drainage; frostaction; structural design of rigid and flexible pavements;highway economics and finance; maintenance andrehabilitation.Prerequisite(s): Fourth year status in engineering.Recommended prerequisites: CIVE 2004, CIVE 3304 andCIVE 3208.Lectures three hours a week, problem analysis three hoursalternate weeks.

CIVE 4301 [0.5 credit]Foundation EngineeringA critical study of the theories in soil mechanics and theirapplication to the solution of geotechnical engineeringproblems. Field investigations, laboratory and field testing,shallow foundations, special footings, mat foundations, pilefoundations and excavations. Discussion of new methodsand current research.Prerequisite(s): CIVE 4208.Lectures three hours a week, laboratory three hoursalternate weeks.

CIVE 4302 [0.5 credit]Reinforced and Prestressed Concrete DesignReinforced concrete shear and torsion design. Two-way slab design by Direct Design and Equivalent FrameMethod. Behaviour and design of slender reinforcedconcrete columns. Prestressed concrete concepts; flexuralanalysis and design; shear design; anchorage zonedesign; deflection and prestress loss determination.Prerequisite(s): CIVE 3202, CIVE 3203 and CIVE 3206.Lectures three hours a week, problem analysis three hoursalternate weeks.

CIVE 4303 [0.5 credit]Urban PlanningA systematic approach to urban planning; urbansprawl; data collection; forecasting; standards; spacerequirements; land use; zoning; transportation; landdevelopment; site selection; land capability; layout;evaluation; housing; urban renewal and new towns.Also listed as GEOG 4303.Prerequisite(s): third-year status in Engineering, orpermission of the Department.Lectures three hours a week, problem analysis three hoursalternate weeks.

CIVE 4307 [0.5 credit]Municipal HydraulicsFluid flow fundamentals. Hydraulics of pipe systems. Openchannel flow. Prediction of sanitary and storm sewage,flow rates. Design of water distribution systems, culverts,sanitary and storm sewers. Pumps and measuringdevices. Hydraulic and flow control structures.Prerequisite(s): MAAE 2300.Lectures three hours a week, problem analysis 1.5 hourseach week.

CIVE 4308 [0.5 credit]Behaviour and Design of Steel StructuresBehaviour and design of open web steel joists, steel andcomposite decks, composite beams and columns, studgirders, and plate girders. Design of moment connections,base plates and anchor bolts, and bracing connections.Stability of rigid and braced frames. Design for lateral loadeffects.Prerequisite(s): CIVE 3205 and fourth-year status inEngineering.Lectures three hours a week, problem analysis three hoursalternate weeks.

CIVE 4400 [0.5 credit]Construction/Project ManagementSystems approach to project planning and control.Analysis of alternative network planning methods: CPM,precedence and PERT; planning procedure; computertechniques and estimating; physical, economic andfinancial feasibility; implementation feedback and control;case studies.Also listed as BUSI 4308.Prerequisite(s): fourth-year status in Engineering.Lectures three hours a week, problem analysis three hoursalternate weeks.

CIVE 4403 [0.5 credit]Masonry DesignIntroduction to structural design in masonry. Propertiesof masonry materials and assemblages. Behaviour anddesign of beams, walls and columns. Selected topicsincluding veneer wall systems, differential movement,workmanship, specifications, inspection, maintenance andrepair. Lowrise and highrise building design.Also offered, at the graduate level with additional ordifferent requirements, as CIVE 5200, for which additionalcredit is precluded. Prerequisite: fourth-year status inEngineering or permission of the Department.Prerequisite(s): CIVE 3204, CIVE 3206 and fourth-yearstatus in Engineering or permission of the Department.Lectures three hours a week, problem analysis three hoursalternate weeks.

CIVE 4407 [0.5 credit]Municipal EngineeringIntroduction to fundamentals of municipal engineering.Water quality: physical, chemical and biologicalparameters. Water treatment: softening mixing,flocculation, sedimentation, filtration, disinfection,fluoridation. Biological processes. Wastewater treatment:primary, secondary and tertiary treatment. Sludge disposaland wastewater reuse. Solid waste management.Prerequisite(s): fourth-year status in Engineering.Lectures three hours a week, problem analysis 1.5 hourseach week.


CIVE 4500 [0.5 credit]Computer Methods in Civil EngineeringAdvanced software development for Civil Engineeringapplications. Examples may be chosen from surveying,transportation, geotechnical and/or structural engineering.Software technologies include object-orientedprogramming, data base management, Internet-basedapplications and graphical user interfaces. Also offered, atthe graduate level with additional or different requirements,as CIVE 5602 for which additional credit is precluded.Prerequisite(s): ECOR 2606 and fourth-year status inEngineering.Lectures three hours a week, problem analysis three hoursalternate weeks.

CIVE 4601 [0.5 credit]Building Pathology and RehabilitationDeterioration mechanisms for concrete, timber, steel andmasonry structures. Identification of design deficiencies;criteria for selection and design of rehabilitation systems.Design techniques to reduce deterioration in newconstruction and historical structures.fourth-year standing in B.A.S. concentration inConservation and Sustainability.Also listed as ARCN 4200.Prerequisite(s): fourth-year status in B.Eng. inArchitectural Conservation and Sustainability Engineeringor fourth-year standing in B.A.S. concentration inConservation and Sustainability.Lectures three hours a week, lab/field work two hours aweek.

CIVE 4614 [0.5 credit]Building Fire SafetyUnderstanding fire-structure interaction and theconcepts of fire severity and resistance; behaviour ofsteel, concrete, and timber buildings exposed to fires;compartment fire dynamics; correlations and computermodels to predict fire dynamics; fire retardants; laboratory-scale fire experiments; performance-based approach forbuilding fire safety design.Prerequisite(s): fourth-year status in Engineering, orpermission of the Department.Lectures three hours a week, problem analysis andlaboratories three hours alternate weeks.

CIVE 4907 [1.0 credit]Engineering ProjectA major project in engineering analysis, design,development or research carried out by individual studentsor small teams. The objective is to provide an opportunityto develop initiative, self-reliance, creative ability andengineering judgment. A project proposal, an interimreport, an oral presentation, and a comprehensive finalreport are required.Prerequisite(s): fourth-year status in Engineering, orpermission of the department.

CIVE 4918 [1.0 credit]Design ProjectTeams of students develop professional level experiencethrough a design project that incorporates fundamentalsacquired in previous mathematics, science, engineering,and complementary studies courses. A final report andoral presentations are required.Prerequisite(s): fourth-year status in Engineering.Lectures one hour a week, problem analysis three hours aweek.

Electronics (ELEC) Courses

Electronics

Faculty of Engineering & DesignELEC 1908 [0.5 credit]First Year ProjectA practical introduction to engineering design. Studentswork in small teams to specify, design and implementa system, formally managing the project progress andsubmitting oral and written reports. Professionalism:engineering ethics; health and safety. Technology, societyand the environment.Prerequisite(s): registration in the Engineering Physicsprogram.Lectures and tutorials three hours a week, laboratory fourhours a week.

ELEC 2501 [0.5 credit]Circuits and SignalsProperties of signals. Basic circuit elements: voltage andcurrent sources. Kirchhoff’s laws, linearity, superposition.Thevenin and Norton’s theorems. Circuit simplification. ACsteady-state analysis: impedance, admittance, phasors,frequency response. Transient response of RL and RCcircuits: form of response, initial and final conditions. RLCcircuits: resonance.Prerequisite(s): MATH 1005 and (PHYS 1004 or PHYS1002).Lectures three hours a week, laboratory and problemanalysis three hours a week.

ELEC 2507 [0.5 credit]Electronics IQualitative semiconductor physics, leading to the diodeequation. Diode applications. Operational amplifiers andtheir application in feedback configurations including activefilters. Introduction to bipolar transistors and MOSFETs,analysis of biasing circuits. Transistor applicationsincluding small signal amplifiers.Prerequisite(s): ELEC 2501.Lectures three hours a week, laboratory and problemanalysis three hours a week.

22 Engineering

ELEC 2607 [0.5 credit]Switching CircuitsBoolean algebra, gate, combinatorial circuits. DeMorgannotation, sum-of-product and product-of-sum forms. Logicarrays, PLAs and PALs. Flip-flops, latches, sequentialcircuits, state graphs and state minimization. Counters andcontrollers. Hazards. Asynchronous sequential circuits,race free assignment, realization.Precludes additional credit for SYSC 2607/SYSC 3607 orELEC 3607.Prerequisite(s): PHYS 1004 or PHYS 1002.Lectures three hours a week, laboratory three hoursalternate weeks.

ELEC 3105 [0.5 credit]Basic EM and Power EngineeringElectrostatics and magnetostatics. Solution of Poisson’sand Laplace’s equations. The Lorenz equation and force.Time varying fields. Magnetic circuits and transformers.DC and AC motors.Precludes additional credit for ELEC 2601 or ELEC 3504.Prerequisite(s): MATH 2004 and (PHYS 1004 or PHYS1002).Lectures three hours a week, laboratory and problemanalysis three hours alternate weeks.

ELEC 3500 [0.5 credit]Digital ElectronicsDigital circuit design using verilog and logic synthesis, theelectronic properties of logic gates, electrical interfacingbetween logic families, asynchronous to synchronousinterfacing, clock distribution and timing, VLSI designoptions. Students implement substantial circuits with field-programmable gate arrays.Prerequisite(s): ELEC 2507 and ELEC 2607.Lectures three hours a week, laboratory three hours aweek.

ELEC 3508 [0.5 credit]Power ElectronicsPower transformers. DC and AC motors. Powersemiconductor device

Registration in CUTV sections is not acceptable. Note ... · ECOR 2606 [0.5] Numerical Methods CCDP...

Documents

Transcript of Registration in CUTV sections is not acceptable. Note ... · ECOR 2606 [0.5] Numerical Methods CCDP...