Reforming Processes Blow Moulding. What is It? The Process used to manufacture hollow products such...
12
Reforming Processes Blow Moulding
-
Upload
milton-cummings -
Category
Documents
-
view
215 -
download
2
Transcript of Reforming Processes Blow Moulding. What is It? The Process used to manufacture hollow products such...
Reforming ProcessesBlow Moulding
What is It?
The Process used to manufacture hollow products such as drinking bottles, fabric conditioner containers and washing up liquid bottles.
The Machine
Diagram 1
Diagram 2
Diagram 3
The Process
The plastic is heated in the same way as injection moulding.
An extruded parison is inserted into the split mould die.
The split mould closes, sealing the parison at one end.
Hot compressed air forces the plastic onto the shape of the mould.
The process continued……
The mould is cooled and the plastic hardens.
The mould opens and the product is ejected.
The process is repeated.
The Process - Animation
http://www.bpf.co.uk/downloads/files/BlowMoulding.swf
The Products
Blow Moulding - Advantages
Intricate shapes can be formed such as screw heads on bottles.
Moulds produce accurate products. Highly automated process. Products require very little finishing. Suitable for high volume production. Low unit cost for long production runs. Textures can be added to the surface of the
product.
Blow Moulding - Disadvantages
Moulds are very expensive to develop and produce.
Not suitable for small production runs. Large amounts of waste created.
