REDUCING ACCIDENT RATES - goodyearrubberproducts.com · bespoke and innovative solutions to the...
Transcript of REDUCING ACCIDENT RATES - goodyearrubberproducts.com · bespoke and innovative solutions to the...
2
Globus is a specialist and a leading provider of hand protection to the oil, gas and petrochemical sector.
Injuries to hands constitute nearly 50% of all health and safety incidents in the oil, gas and petrochemical industries and the knock-on e�ects are signi�cant, not only to the individual but to the organisation too.
Protecting a workforce with an advanced hand protection solution from Globus can result in a reduction in accident rates, improved productivity, enhanced environmental credentials and robust, demonstrable commercial bene�ts.
IMPROVE THE PROFITABILITY OF YOUR OPERATIONS
Globus is a world leader in protecting hands and has established an enviable reputation for delivering bespoke and innovative solutions to the most complex hand safety problems faced by workers in the oil, gas and petrochemical sector.
Working in conjunction with Health and Safety teams, Globus can assist in building a bespoke hand protection policy that not just addresses hand safety issues, but one that can improve company productivity and also reduce costs.
Globus is a specialist and a leading provider of hand protection to the oil, gas and
petrochemical industries and the knock-on e�ects are signi�cant, not only to the individual but to the
Protecting a workforce with an advanced hand protection solution from Globus can result in a reduction in accident rates, improved productivity, enhanced environmental credentials and robust,
REDUCING ACCIDENT RATESIMPROVING PRODUCTIVITYSAVING COSTS
CONFIDENTLY HANDLING THE CHALLENGES YOU FACE EVERY DAY
Workers in the oil, gas and petrochemical industry are exposed to a multitude of hazards on a daily basis, including blunt force impacts, abrasions, cuts and chemical burns. Despite the hazards, many trades are also constantly challenged to achieve reliable grip performance in wet and oily handling conditions.
Hand protection solutions from Globus can have a widespread e�ect on an employee’s performance as well as their safety. With the correct gloves being worn for the task and for the worker, hands are more likely to be correctly protected for entire shifts, thus boosting productivity and morale too.
CHEMICALS The potential risks to employees who are exposed to chemicals, even brie�y, are vast. The skin can be greatly damaged by chemicals and wearing gloves is the only barrier that can prevent hazardous contact.
Chemical hazards are prevalent to workers on drilling platforms when drawing mud, oil and benzenes from the sea bed as well as in re�neries. Experts from Globus can advise regarding glove suitability for speci�c chemicals.
THE ELEMENTS Industry workers can face extremely harsh and changeable weather conditions which can signi�cantly impact the risk to the individual as well as the site.
Insulated liners are crucial for preserving dexterity and sensation to the hand and �ngers in cold conditions. Advanced waterproof coatings repel rain and liquids, whilst innovative breathable membranes allow perspiration and warm air to escape at the same time.
SINGLE USE DURABLEPROTECTION
Versatile nitrile disposable gloves provide a strong barrier of protection against many petrochemicals. They are ideal for workers with a latex sensitivity and mould to the shape of the hand ensuring a secure and comfortable �t.
Single use nitrile gloves are up to four times more puncture resistant than standard latex alternatives and can also be worn under other work gloves to bolster protection against liquids.
VISIBILITY Gloves featuring hi-viz properties help to draw attention and distinguish the wearer from his or her immediate environment.
Not only can this enhance safety, it can also make hand signalling more e�cient over distance.
The professionally manufactured gloves in the Globus portfolio are designed to meet the rigorous requirements of the oil, gas and petrochemical industry.
Each glove is constructed to enhance the wearer’s performance, allowing maximum dexterity and to protect in the harshest of conditions.
Kevlar® is a registered trademark of E.I.du Pont de Nemours and Company. Dyneema® is a registered trademark of DSM Dyneema.
4 5
CUTS AND ABRASION
Cut hazards can lead to severe abrasions and lacerations to hands. Kevlar® and engineered composite yarns containing steel are woven into gloves to add resistance and perform in heavy duty environments.
Tests have demonstrated that gloves made with Dyneema® have up to twenty times better abrasion resistance than gloves made with Aramid yarns. Matching the appropriate level of cut protection to the hazard is crucial to maintain performance.
IMPACTS, CRUSHES AND PINCHES
Injuries from impacts form the majority of hand injuries to workers in the industry. Gloves featuring directly-injected Thermo Plastic Rubber (TPR) help protect the �ngers, thumb, back of hand and knuckles.
TPR zones are critical in helping the user to free their hand from the glove if involved in an incident involving impact.
OIL GRIP Good glove grip is essential to provide the wearer with proper control over his or her working environment and help prevent serious injury.
Gloves featuring the latest high-tech coatings provide resistance to petrochemicals and contain e�cient absorbency properties allowing greasy objects to be lifted, carried or assembled with con�dence. Inadequate grip can motivate hand fatigue and also promote musculo-skeletal injuries as well as dermatological issues.
SOLUTIONS DESIGNED AROUND YOU
SIX STEPS TO BESPOKE HAND PROTECTION FROM GLOBUS
Re-trials
Introduction Terms of Reference
GloveSurvey
ProductTrials
Agreed Implementation
Process
Ongoing Support Package
1 2 3 4 5 6
As part of the GHPP, Globus will:
Conduct comprehensive site surveys
Consider all legal obligations
Provide detailed information and posters
Support sampling and trial programmes
Present ‘tool box’ awareness training
Monitor glove trials
Be available to assess hand incident reviews
Produce a bespoke solution report containing measurement criteria
It’s essential to ensure that a Globus hand protection solution adds value. Often the �rst step is to carry out an individually designed assessment of hand safety requirements – the Globus Hand Protection Programme (GHPP).
The aim of this bespoke programme is to deliver demonstrable compliance and best practice through interaction, evaluation and measurement, underpinned with training and a tailored
support package.
Aiding Compliance
Reducing Accident Rates
Supporting Cost Savings
Improving Productivity
Boosting Environmental Credentials
Benefits of the GHPP
6 7
CHEMICAL PROTECTION
Pages 19 - 21
CUT RESISTANTPROTECTION
Pages 25 - 27
THERMALPROTECTION
Pages 22 - 24
IMPACT PROTECTION
Pages 10 - 18
GENERAL HANDLING
Pages 28 - 32
HAND PROTECTION PRODUCT GUIDE
The Globus oil, gas and petrochemical portfolio features a range of innovative protective gloves constructed to endure the harshest of conditions. Globus is pleased to present a selection of styles that cover all the hazards that workers face in the industry.
8 9
� Drilling � Engineering � Heavy Construction � Maintenance � Rigging
� Deck Crew � Drillers � Engineer � Mechanical Fitters � Pipe Fitters � Riggers � Roustabout
Typical Applications Suitable Trades
Sizes and Product Codes8/M 9/L 10/XL 11/XXL Case Qty
SKY862 SKY863 SKY864 SKY865 60
TORQUE FLEX™
� Drilling � Engineering � Heavy Construction � Maintenance � Rigging
� Deck Crew � Drillers � Engineer � Mechanical Fitters � Pipe Fitters � Riggers � Roustabout
High-viz anti-impact glove with excellent grip and abrasion resistance. Unrivalled dexterity from an impact glove.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES � Durable double synthetic leather construction
� Dense, moulded TPR protection zones on knuckles, fingers,
thumb and back of hand
� Textured grip reinforced with Kevlar® applied to thumb and
index finger
� Oil and water resistant palm
� Hi-vis colour for efficient hand signalling
� Anti-slip technology for enhanced cushioned grip
� Neoprene cuff resists snagging and offers a secure fit
� Anatomical design helps prevent hand fatigue
� Laminated polyester and PVC coating, synthetic leather, PU, nylon and synthetic leather palm.
Sizes and Product Codes8/M 9/L 10/XL 11/XXL Case Qty
SKY852 SKY853 SKY854 SKY855 60
EN388: 2003
3231
EN388: 2003
3231
TORQUE STEALTH™
Anti-impact glove with excellent grip and abrasion resistance.
MATERIALS
KEY FEATURES � Durable double synthetic leather construction
� Dense, moulded TPR protection zones on knuckles, fingers, thumb and back of hand
� Velcro fastening cuff
� Textured grip reinforced with Kevlar® applied to thumb and index finger
� Oil and water resistant palm
� Anti-slip technology for enhanced cushioned grip
� Neoprene cuff resists snagging and offers a secure fit
� Black colouring extends wearable life
� Laminated polyester and PVC coating, synthetic leather, PU, nylon and leather palm.
CAT II CAT II
10 11
IMPACT PROTECTION IMPACT PROTECTION
DEEP GRIP® KOOL
� Drilling � Engineering � Heavy Construction � Maintenance � Rigging
� Deck Crew � Drillers � Engineers � Mechanical Fitters � Pipe Fitters � Riggers � Roustabout
Featuring one less layer of fabric than the ‘Deep Grip’ model, Deep Grip Kool is a breathable, oil resistant glove with excellent grip and durability.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES � Soft and comfortable with enhanced breathability � Direct injection Thermo Plastic Rubber (TPR) is glued, thermo-welded and
Kevlar® stitched to withstand the harshest of environments � SkidX Grip™ provides excellent resistance to oil, water and petrochemicals
and heightened gripping power for wet, oily or dry surfaces � Extra layer of SkidX Grip™ between thumb and forefinger � Designed to enable the hand to be withdrawn if caught in machinery
� Thermo Plastic Rubber, Kevlar®, Nylon liner.
CAT II
EN388: 2003
4342
Sizes and Product CodesM L XL XXL Case Qty
CSL092 CSL093 CSL094 CSL095 100
Kevlar® is a registered trademark of E.I.du Pont de Nemours and Company
DEEP II® GRIP
� Drilling � Engineering � Heavy Construction � Maintenance � Rigging
� Pipe Fitters � Mechanical Fitters � Riggers � Drillers � Roustabout � Deck Crew � Engineers
Single-piece TPR shield provides continuous protection from �nger tips to wrist.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES � Single-piece 3D Thermo Plastic Rubber (TPR) � Double Kevlar® thread palm stitching for added durability � SkidX Grip™ provides excellent resistance to oil, water and petrochemicals
and heightened gripping power for wet, oily or dry surfaces � Extra layer of SkidX Grip™ between thumb and forefingers � Easy-pull tabs allow personalisation and enable the glove to be pulled on
with ease � Reflective hi-viz properties for enhanced hand visibility
� Thermo Plastic Rubber, PU, Kevlar®, Nylon and Polyester liner
CAT II
EN388: 2003
4342
Sizes and Product CodesM L XL XXL Case Qty
CSL102 CSL103 CSL104 CSL105 100Kevlar® is a registered trademark of E.I.du Pont de Nemours and Company
Thermal version also available - see Page 24
DEEP GRIP®
Impact resistance and dependable grip, for the most harshest of handling environments.
MATERIALS
KEY FEATURES � Direct injection Thermo Plastic Rubber (TPR) is glued, thermo-welded and Kevlar® stitched to withstand the harshest of environments
� SkidX Grip™ provides excellent resistance to oil, water and petrochemicals and heightened gripping power for wet, oily or dry surfaces
� Reinforced with an extra layer of SkidX Grip™ between thumb and forefinger
� Long-cuff design bolsters protection, comfort and ‘tear-away’ ability
� Easy-pull tabs allow personalisation and enable the glove to be pulled on with ease
� Thermo Plastic Rubber, Kevlar®, Nylon liner.
� Drilling � Rigging � Engineering � Heavy Construction � Maintenance
� Deck Crew � Drillers � Engineers � Mechanical Fitters � Pipe Fitters � Riggers � Roustabout
Typical Applications Suitable Trades
CAT II
EN388: 2003
4342
Sizes and Product CodesM L XL XXL Case Qty
CSL082 CSL083 CSL084 CSL085 100
12 13
IMPACT PROTECTION IMPACT PROTECTION
� Drilling � Engineering � Heavy Construction � Maintenance � Rigging
� Deck Crew � Drillers � Engineers � Mechanical Fitters � Pipe Fitters � Riggers � Roustabout
Maximum cut resistancy and powerful grip in oily and wet handling conditions.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES � Level 5 cut resistance (EN388)
� Direct injection Thermo Plastic Rubber (TPR) is glued, thermo-welded and Kevlar® stitched to withstand the harshest of environments
� SkidX Grip™ provides excellent resistance to oil, water and petrochemicals and heightened gripping power for wet, oily or dry surfaces
� Easy-pull tabs allow personalisation and enable the glove to be pulled on with ease
� Thermo Plastic Rubber, Nylon and Polyester liner
CAT II
CAT II
EN388: 2003
EN388: 2003
4543
4543
Sizes and Product CodesM L XL XXL Case Qty
CSL112 CSL113 CSL114 CSL115 100
CUT LEVEL
5CUT
LEVEL
3
CUT LEVEL
5
Kevlar® is a registered trademark of E.I.du Pont de Nemours and Company
DEEP III® CUT-5
DEEP III® SONIC 10
Oil and impact resistance with 3D sonic grip to maximise gripping power. Aero vents for breathable comfort.
MATERIALS
KEY FEATURES
� Thermo Plastic Rubber, PU, Kevlar®, Nylon and Polyester.
� Construction � Maintenance � Rigging � Rope Access � Scaffolding
� Engineers � Maintenance � Pipe Fitters � Riggers � Rope Access � Scaffolders � Technicians
Typical Applications Suitable Trades
CAT II
EN388: 2003
4231
Sizes and Product CodesM L XL XXL Case Qty
CSL062 CSL063 CSL064 CSL065 100
DEEP GRIP® WINTER
� Drilling � Engineering � Heavy Construction � Maintenance � Rigging
� Deck Crew � Drillers � Engineers � Mechanical Fitters � Pipe Fitters � Riggers � Roustabout
Luxury meets high-tech! Oil and impact-resistant glove with incredible warmth and comfort.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES � Lined with non-pilling and fast-drying Micro-Sable™ � Single-piece 3D (patented design) Thermo Plastic Rubber (TPR) for full back
of hand impact protection � Double Kevlar® thread palm stitching for added durability � SkidX Grip™ provides excellent resistance to oil, water and petrochemicals
and heightened gripping power on wet, oily or dry surfaces � Long-cuff design bolsters protection, comfort and ‘tear-away’ ability � Soft and flexible fit
� Thermo Plastic Rubber. Micro-Sable™ liner
CAT II
EN388: 2003
4342
Sizes and Product CodesM L XL XXL Case Qty
CSL072 CSL073 CSL074 CSL075 100
t-resistant glove with incredible warmth and comfort.
HMD CUT-5
� Drilling � Engineering � Heavy Construction � Maintenance � Rigging
� Deck Crew � Drillers � Engineers � Mechanical Fitters � Pipe Fitters � Riggers � Roustabout
Cut and rip-resistant HPPE �bre glove with an oil-resistant nitrile-dipped palm providing grip on wet, oily or dry surfaces.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES � HPPE fibres add level 5 cut resistance (EN388) � Nitrile palm coating with a rough finish for oil resistant grip � Flexible Thermo Plastic Rubber (TPR) protects fingers, thumb, back of hand and
knuckles from cuts and scrapes � Form-fitting design enhances comfort � Dust and lint-free adds durability and longevity
� Thermo Plastic Rubber (TPR), HPPE and Nitrile
Sizes and Product CodesM L XL XXL Case Qty
CSL152 CSL153 CSL154 CSL155 100
� Provides 10 different angles of grip on the palm surface to maximise gripping power
� Direct injection single-piece Thermo Plastic Rubber (TPR) adds pinch-point protection for fingertips
� Flexible protection shields enhances resistance against impacts � Elasticated long-cuff design helps prevent debris from entering the glove
whilst adding ‘tear-away’ ability � Easy-pull tabs allow personalisation and enable the glove to be pulled
on with ease
14 15
IMPACT PROTECTION IMPACT PROTECTION
TOW GRIP 101
� Construction � Demolition � Extraction � Fracking � Maintenance � Mining � Refining
� Bat Chain Puller � Iron Worker � Machine Operators � Non-Drilling Trades � Mechanical Fitters
Features an industrial-strength cotton palm and back-of-hand impact resistance for the non-drilling positions on oil and gas rigs.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES � Industrial-strength, dual-layer, padded cotton palm gives the user dexterity for operating machinery
� Reinforced zip-grip thumb crotch enhances grip control and reinforces the area subject to most stress
� Flexible TPR shields provide full back-of-hand protection from the fingertips to the knuckles and metacarpals
� Double Kevlar® stitching boosts durability and longevity to the palm � Form-fitting high-vis spandex adds breathability and comfort � Long cuff design bolsters protection, comfort and ‘tear-away’ ability when
operating heavy machinery
� Thermo Plastic Rubber (TPR), Kevlar® stitching, Cotton, Spandex and Neoprene
CAT II
EN388: 2003
Under certi�cation
Sizes and Product CodesM L XL XXL Case Qty
CSL162 CSL163 CSL164 CSL165 100
TOW GRIP 201
Features a reinforced oil-resistant dual-layer grip on its palm reinforced with double Kevlar® thread stitching.
MATERIALS
KEY FEATURES
� Thermo Plastic Rubber (TPR), Kevlar® stitching, Cotton, Spandex and Neoprene
� Construction � Demolition � Extraction � Fracking � Maintenance � Mining � Refining
� Deck Crew � Drillers � Iron Worker � Mechanic � Pipe Fitter � Rigger
Typical Applications Suitable Trades
CAT II
EN388: 2003
2142
Sizes and Product CodesM L XL XXL Case Qty
CSL172 CSL173 CSL174 CSL175 100
� Oil-Resistant dual-layer palm enhances oil and water resistance � Durable zip grip provides resistance to oil, water and petro-chemicals � Textured palm aids grip on wet, oily or dry surfaces � Flexible TPR shields provide full back-of-hand protection from the
fingertips to the knuckles and metacarpals � Double Kevlar® stitching boosts durability and longevity to the palm � Reinforced thumb crotch enhances grip control and reinforces the area
subject to most stress � Adjustable short cuff
TOW GRIP HEXX
Oil and impact resistant with a silicone hexagonal grip palm.
� Barrel and Drum Handling
� Extraction � Fracking � Refining
� Deck Crew � Drillers � Iron Worker � Mechanic � Pipe Fitter � Rigger
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES � Flexible Thermo Plastic Rubber (TPR) protects fingers, thumb, back of hand and knuckles from cuts and scrapes
� Hexagonal silicone grip allows oil-resistant grip when handling wet or dry surfaces
� Reinforced thumb crotch and SkidX™ grip enhances longevity in this high-wear area
� Triple-layer, single-piece cotton palm � Form-fitting spandex adds breathability and comfort � Long cuff design bolsters protection and ‘tear-away’ ability when
operating heavy machinery
� Thermo Plastic Rubber (TPR), Cotton and Spandex
CAT II
EN388: 2003
3223
Sizes and Product CodesM L XL XXL Case Qty
CSL142 CSL143 CSL144 CSL145 100Kevlar® is a registered trademark of E.I.du Pont de Nemours and Company
DM HYBRID®
Protective mining gloves with one-piece Ripple-Grip technology. Extreme protection for critical impact points.
MATERIALS
KEY FEATURES
� Enhanced synthetic leather, Thermo Plastic Rubber
� Barrel and Drum Handling
� Demolition � Drilling � Extracting � Fracking � Underground Mining
� Deck Crew � Drillers � Engineers � Riggers � Roustabout � Miners
Typical Applications Suitable Trades
CAT II
EN388: 2003
3242
Sizes and Product CodesM L XL XXL Case Qty
CSL032 CSL033 CSL034 CSL035 100
� Hexagonal Memory Gel® padding in the palm absorbs vibrations from machinery and power tools
� Exclusive Cestus Ripple Grip® palm maximises dry and wet grip � Hard shell protector over the knuckles � Single-piece synthetic leather construction increases durability to the
back of the glove � Reinforced saddle with an extra layer of enhanced synthetic leather
between thumb and forefinger � Enhanced hi-vis for hand visibility in poor and fading light
16 17
IMPACT PROTECTION IMPACT PROTECTION
379
� Chemical Handling� Drilling� Maintenance � Painting
� Chemical Process Engineers� Drillers� Painters
Fully coated nitrile with a nitrile sponge palm providing excellent grip in wet and oily conditions whilst protecting from chemicals.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES � Impermeable� Protects the hand and forearm from oils, chemicals, grease and abrasion� Seamless for optimum comfort� Excellent wet and oil grip� Scalloped edge� Length: 30-32cm (depending on size)
� Nitrile foam coating on nitrile. Polyester / nylon knit liner.
CAT III
EN388: 2003 EN374-3: 2003 EN374-2: 2003
4122 JKL
660
� Chemical Handling
� Drilling
� Maintenance
� Painting
� Chemical Process Engineers
� Drillers
� Painters
These durable triple-dipped heavyweight PVC gloves are strong, yet extremely soft and �exible. They feature a soft comfortable cotton lining and the rough textured coating ensures grip and increases the glove’s abrasion resistance and durability. Available in 3 di�erent lengths.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES
� PVC coating. Cotton liner.
CAT III
EN388: 2003 EN374-3: 2003 EN374-2: 2003
4121 JKL
� Impermeable
� Excellent dexterity and durability
� Length: 30cm
� Rough surface enhances grip and durability
� Seamless for optimum comfort
� Antibacterial and anti-odour treatment
� Other length variants available: 34cm (660/34) and 36cm (660/36)
� Scalloped edge
Sizes and Product Codes8/M 9/L 10/XL 11/XXL Case Qty
SHO3792 SHO3793 SHO3794 SHO3795 60
Sizes and Product Codes8/M 9/L 10/XL 11/XXL Case Qty
SHO6602 SHO6603 SHO6604 SHO6605 120
ROCKHARD® ORIGINAL
� Cable Handling � Construction � Demolition � Forestry � Landscaping � HVAC Servicing
� Drivers � Equipment Operators � Maintenance
A durable, dual-layer leather glove with excellent dexterity and resistance to impacts and lacerations.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES � Durable single-piece, padded leather palm enables excellent dexterity � Double stitched palm boosts durability and longevity � Reinforced zip-grip thumb crotch provides enhanced grip control � Special material on surface of little finger allows user to use touch-screen devices � Flexible TPR zones resist impacts � Form-fitting spandex adds breathability � Elasticised, long-cuff design bolsters protection, comfort and ‘tear-away’ ability
� Goat-skin Leather Palm, Thermoplastic Rubber shields, Terry cloth and Spandex
CAT II
EN388: 2003
Under certi�cation
Sizes and Product CodesM L XL XXL Case Qty
CSL182 CSL183 CSL184 CSL185 100
TREMBLEX®-5
� Construction � Demolition � Forestry
� Chainsaw Operators � Power Tool Users � Pit Crews � Motorcyclists
Anti-vibration �ngerless design.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES � Hexagonal Memory Gel® with a silicone surface absorbs vibrations from impact tools whilst enhancing gripping power
� Designed to help prevent Carpal Tunnel Syndrome and Hand-Arm Vibration Syndrome
� Neoprene Polychloroprene aids breathability and resists damage from the sun, ozone and inclement weather
� Terry cloth comfortably absorbs sweat from brow or hand � Adjustable wrist strap ensures a snug fit
� Silicone surface, Neoprene Polychloroprene, Terry cloth
Sizes and Product CodesM L XL XXL Case Qty
CSL042 CSL043 CSL044 CSL045 100
CAT II
EN388: 2003
2121
18 19
CHEMICAL PROTECTIONIMPACT PROTECTION
720
� Chemical Handling� Drilling� Maintenance� Painting
� Chemical Process Engineers� Drillers� Painters
A �ne, supple glove o�ering high resistance to chemicals and excellent protection against abrasion. For demanding tasks that require manual exertion and complete control over work materials in wet handling conditions.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES � Exceptional durability, flexibility, dexterity and comfort
� Thickness: 1mm
� Impermeable
� Length: 30cm
� Nitrile coating. Nylon / polyester liner.
CAT III
EN388: 2003 EN374-3: 2003 EN374-2: 2003
3132 AJKL
Sizes and Product Codes7/S 8/M 9/L 10/XL 11/XXL Case Qty
SHO7201 SHO7202 SHO7203 SHO7204 SHO7205 120
� Antibacterial and anti-odour treatment
� Seamless for optimum comfort
� Scalloped edge
N-DEX 7700PFT®
� Chemical Process � Engineering � Instrumentation � Laboratories � Maintenance� Mechanical � Painting
� Chemical Process Engineers� Deck Crew � Drillers � Engineers � Instrument Technicians � Mechanical Fitters � Painters� Pipe Fitters
100% Accelerator-free nitrile single use disposable glove. Extremely durable with textured �ngertips.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES
� Nitrile
� Premium performance nitrile disposable gloves� Protects against a wide array of
chemical hazards� Cuff prevents debris from entering
the glove� Powder-free, latex-free
� Lightweight and comfortable with a ‘second skin’ feel� Antistatic properties� Length: 24cm
CAT III
EN374-3: 2003 EN374-2: 2003
Sizes and Product Codes7/S 8/M 9/L 10/XL Case Qty
BST77001 BST77002 BST77003 BST77004 20 boxes, 50 singles per box
UTAH™
� Chemical Process � Engineering � Instrumentation � Laboratories� Maintenance� Mechanical� Painting
� Chemical Process Engineers � Engineers � Drillers � Instrument Technicians � Mechanical Fitters � Pipe Fitters
High performance, powder-free, nitrile single use disposable glove. Signi�cantly stronger alternative to latex.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES
� Nitrile
� Comfortable with a ‘second skin’ feel� Resistant to oils, acids and many
chemicals� Category III, EN374 � AQL 1.5� Powder-free� Textured finish
CAT III
EN374-3: 2003 EN374-2: 2003374-2: 2003
Sizes and Product Codes7/S 8/M 9/L 10/XL Case Qty
SKYUTAH1 SKYUTAH2 SKYUTAH3 SKYUTAH4 10 boxes, 100 singles per box
TEAL™
� Chemical Process � Engineering � Instrumentation � Laboratories � Maintenance� Mechanical � Painting
� Chemical Process Engineers� Deck Crew � Drillers � Engineers � Instrument Technicians � Mechanical Fitters � Painters� Pipe Fitters
Premium performance, powder-free, nitrile single use disposable glove. Extremely strong and o�ers greater chemical and puncture resistance than regular nitrile disposables.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES
� Nitrile
� Premium performance NBR nitrile disposable gloves� Resistant to oils, acids and many
chemicals� Up to four times the puncture
resistance of latex� Powder-free
� Lightweight and comfortable with a ‘second skin’ feel� Textured fingertips for a secure grip� Category III, EN374 and EN455
approved� AQL 1.5
CAT III
EN374-3: 2003 EN374-2: 2003
Sizes and Product Codes7/S 8/M 9/L 10/XL Case Qty
SKYTEAL1 SKYTEAL2 SKYTEAL3 SKYTEAL4 10 boxes, 100 singles per box
emium performance, powder-free, nitrile single use disposable glove. Extremely strong and
374-2: 2003
20 21
CHEMICAL PROTECTION CHEMICAL PROTECTION
Non-thermal version also available - see Page 28
477
� Drilling� Engineering � Heavy Construction� Helideck� Maintenance� Rigging
� Crane Operators � Deck Crew � Drillers � Engineers� Mechanical Fitters � Pipe Fitters � Process Engineers� Riggers� Roustabout
Premium combination of cold protection and oil resistant grip. Insulated liner protects from cold ensuring warmth and comfort all day long whilst the dual nitrile coating technology provides long lasting grip in wet and oily conditions.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES � Impermeable double-engineered nitrile coating
� Fixed, insulated liner
� Highly flexible and resistant to abrasion and tearing
� Wrist well protected
� Seamless for optimum comfort
� Full nitrile coating combined with nitrile foam. Polyester / nylon knit / acrylic liner.
Non-thermal
see Page 28
protects from cold ensuring warmth and comfort all day long whilst the dual nitrile
CAT II
EN388: 2003 EN511: 2006
4231 011
Sizes and Product Codes7/M 8/L 9/XL Case Qty
SHO4772 SHO4773 SHO4774 60
THERMAL PROTECTION
RESISTS COLDTEMPS
WATERPROOF DUAL COATINGTECHNOLOGY 451
� Drilling� Engineering� Heavy Construction� Helideck � Maintenance� Rigging
� Crane Operators � Deck Crew � Engineers � Mechanical Fitters � Pipe Fitters � Process Engineers� Riggers� Roustabout
This cold weather grip glove o�ers a warm, light-weight feel. The rough textured latex grip allows slippery objects to be gripped �rmly. This durable glove is ideal for manual handling in cold weather conditions.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES � Excellent grip
� Insulated liner
� Protects the hand in damp environments or against aggressive detergents or alcohols
� Breathable back of hand
� Seamless for optimum comfort
� Natural latex coating. Acrylic / cotton / polyester knit liner.
CAT II
EN388: 2003 EN511: 2006
2241 010
Sizes and Product Codes7/S 8/M 9/L 10/XL Case Qty
SHO4511 SHO4512 SHO4513 SHO4514 120
THERMAL PROTECTION
282 TEMRES
Featuring breathable technology, 282 TEMRES features an engineered breathable membrane �xed between the coating and insulated liner. The result is warmth and protection from liquids in cold conditions, with the comfort of a breathable glove.
MATERIALS
KEY FEATURES � Breathable technology allows warm air and moisture from inside to escape � Micro roughened coating finish provides excellent grip� Impermeable coating prevents ingress from water and liquids� Fixed, insulated liner� Premium comfort and flexibility of polyurethane� Wrist well protected
� Micro-ventilated polyurethane coating. Nylon / acrylic liner.
� Drilling� Engineering � Heavy Construction � Helideck � Maintenance � Rigging
� Crane Operators � Deck Crew � Drillers � Engineers� Mechanical Fitters � Pipe Fitters � Process Engineers� Riggers� Roustabout
Typical Applications Suitable Trades
CAT II
EN388: 2003 EN511: 2006
4221 021
Sizes and Product Codes8/M 9/L 10/XL 11/XXL Case Qty
SHO2822 SHO2823 SHO2824 SHO2825 60
22 23
THERMAL PROTECTION
ARGON™
� Drilling� Engineering� Heavy Construction� Helideck� Maintenance � Rigging
� Crane Operators � Deck Crew � Drillers � Engineers � Mechanical Fitters � Pipe Fitters � Process Engineers� Riggers� Roustabout
Featuring a soft, thermal lining and a durable HPT foam coating that extends across the knuckles, Argon provides excellent warmth, grip and protection even in damp environments.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES � Durable glove that remains flexible to temperatures as low as –50ºC� HPT foam coating extends across the palm, knuckles and fingers
to provide greater protection even in wet environments� Double insulated and soft lining� Secure grip� Excellent dexterity, flexibility and durability� Encapsulated air molecules provide an inherent cushioning effect� Silicone free
� HPT foam coating. Nylon liner.
CAT II
EN388: 2003 EN511: 2006
3232 020
Sizes and Product Codes8/M 9/L 10/XL 11/XXL Case Qty
SKY082 SKY083 SKY084 SKY085 120
DEEP GRIP® WINTER
� Drilling� Engineering� Heavy Construction� Maintenance� Rigging
� Deck Crew � Drillers � Engineers � Mechanical Fitters � Pipe Fitters� Riggers� Roustabout
Luxury meets high-tech! Oil and impact-resistant glove with incredible warmth and comfort.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES � Lined with non-pilling and fast-drying Micro-Sable™� Single-piece 3D (patented design) Thermo Plastic Rubber (TPR) for full back of
hand impact protection� Double Kevlar® thread palm stitching for added durability� SkidX Grip™ provides excellent resistance to oil, water and petrochemicals and
heightened gripping power for wet, oily or dry surfaces� Long-cuff design bolsters protection, comfort and ‘tear-away’ ability� Soft and flexible fit
� Thermo Plastic Rubber. Micro-Sable™ liner.
t-resistant glove with incredible warmth and comfort.
CAT II
EN388: 2003
4342
Sizes and Product Codes8/M 9/L 10/XL 11/XXL Case Qty
CSL072 CSL073 CSL073 CSL074 100
Kevlar® is a registered trademark of E.I.du Pont de Nemours and Company
NINJA KNIGHT™
� Engineering
� Fabrication
� Insulation
� Machining
� Maintenance
� Electricians
� Insulators
� Pipe Fitters
� Process Engineers
Extremely durable and delivering maximum resistance to cuts, abrasion, tearing and punctures without compromising dexterity, sensitivity and comfort. The bi-polymer coating ensures excellent grip in wet and dry handling conditions.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES � Maximum EN388 mechanical protection of 4-5-4-4
� Retains flexibility despite its high protection levels
� Excellent grip in wet and dry environments
� Superb dexterity and sensitivity - even the most precise of task can be completed
� Elasticated wrist provides a secure and comfortable fit
� Bi-polymer coating. HPPE/glass yarn liner.
CAT II
EN388: 2003
4544
CUT LEVEL
5
CUT LEVEL
3
SAPPHIRE™
� Engineering� Fabrication� Instrumentation � Insulation � Machining� Maintenance
� Electricians � Instrument Technicians � Insulators� Process Engineers� Pipe Fitters
Flexibility and dexterity are guaranteed with the ultra lightweight Sapphire cut level 3 glove. The 18 gauge liner and thin palm-dipped PU coating combine to deliver a cut resistant barrier that is ideal for the superior precision handling of sharp components in light oil and dry conditions.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES � Level 3 cut resistance (EN388)
� Offers a combination of comfort, dexterity and cut resistance
� Secure grip in light oily, greasy and dry conditions
� Excellent resistance to abrasion and tears for extended durability
� Elasticated wrist provides a secure and comfortable fit
� Breathable back to glove to minimise perspiration
� Polyurethane coating. HPPE/glass yarn liner.
CAT II
EN388: 2003
4342
CUT LEVEL
3
Sizes and Product Codes7/S 8/M 9/L 10/XL 11/XXL Case Qty
SKY271 SKY272 SKY273 SKY274 SKY275 120
Sizes and Product Codes7/S 8/M 9/L 10/XL Case Qty
SKY661 SKY662 SKY663 SKY664 120
CUT RESISTANT PROTECTION
24 25
GP-KV1
� Engineering � Fabrication � Insulation � Machining� Maintenance
� Electricians� Insulators � Pipe Fitters � Process Engineers
A �exible easy-maintenance grip glove enabling safe handling of sharp materials with excellent durability.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES � Level 4 cut resistance (EN388)
� Liner constructed using Kevlar® fibre
� Rough latex surface provides excellent grip and a tactile feel
� Seamless liner prevents irritation
� Natural latex coating. Aramid liner.
CAT II
EN388: 2003
3444
CUT LEVEL
4
POLYESTER
STAINLESS STEEL
POLYESTER
SCHEMATIC OVERVIEW OF HAGANE COIL
POLYESTER
POLYESTER
STAINLESS STEEL
POLYESTER
SCHEMATIC OVERVIEW OF HAGANE COIL
POLYESTER
S-TEX KV3
� Engineering � Fabrication � Insulation � Machining� Maintenance
� Electricians � Insulators� Pipe Fitters � Process Engineers
A light and �exible latex coated glove featuring a reinforced Kevlar® liner softened with polyester. It far exceeds the maximum level of cut resistance speci�ed by the EN388 standard.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES � Level 5 cut resistance (EN388)
� Engineered from Showa’s patented Hagane Coil™ fibre
� Optimal protection against cuts with very good durability
� Rough latex surface provides excellent grip and a tactile feel
� Wrist protection
� Natural latex coating, Kevlar®. Polyester liner reinforced with HAGANE stainless steel.
CAT II
EN388: 2003
3544
CUT LEVEL
5
Sizes and Product Codes7/S 8/M 9/L 10/XL Case Qty
SHO3201 SHO3202 SHO3203 SHO3204 120
Sizes and Product Codes7/S 8/M 9/L 10/XL Case Qty
SHO3901 SHO3902 SHO3903 SHO3904 120
CUT RESISTANT PROTECTION
Kevlar® is a registered trademark of E.I.du Pont de Nemours and Company
541
� Engineering� Fabrication � Instrumentation � Insulation� Machining � Maintenance
� Electricians� Insulators� Process Engineers� Pipe Fitters� Instrument Technicians
Supple and light, the 541 provides a high degree of comfort when performing delicate tasks in greasy handing conditions where the risk of cuts is high.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES � Level 3 cut resistance (EN388)
� Protects the hand from oils and grease
� Maximum resistance to abrasion and tearing
� Lightweight and breathable liner
� Dark colour extends wearable life
� Polyurethane coating. HPPE liner.
CAT II
EN388: 2003
4342
CUT LEVEL
3
Sizes and Product Codes6/S 7/M 8/L 9/XL 10/XXL Case Qty
SHO5411 SHO5412 SHO5413 SHO5414 SHO5415 200
CUT RESISTANT PROTECTION
S-TEX 376
� Engineering � Fabrication � Insulation � Machining� Maintenance
� Insulators� Pipe Fitter� Engineers� Mechanical Fitters� Process Engineers
A robust ¾ dipped nitrile grip glove for excellent grip in oily conditions with additional protection against cuts.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES � Level 4 cut resistance (EN388) (ISO 13997: 2284g)� Protects the hand from oils and grease� ¾ coated, extra nitrile coating on palm� Engineered from Showa’s patented Hagane Coil™ fibre� Nitrile coating provides high abrasion resistance and
excellent grip
� Wrist protection
� Nitrile foam coating. Polyester liner reinforced with HAGANE stainless steel.
CAT II
EN388: 2003
4441
CUT LEVEL
4
Sizes and Product Codes6/S 7/M 8/L 9/XL Case Qty
SHOS3761 SHOS3762 SHOS3763 SHOS3764 120
A robust ¾ dipped nitrile grip glove for excellent grip in oily conditions with additional protection
26 27
Thermal version also available - see Page 22
377
� Drilling� Engineering � Heavy Construction� Helideck � Maintenance � Rigging
� Crane Operators � Deck Crew � Drillers � Engineers � Mechanical Fitters � Pipe Fitters � Process Engineers� Riggers� Roustabout
Fully coated nitrile with a nitrile sponge palm. Great grip, ideal for wet and oily tasks, including oil submersion.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES � Impermeable
� Protects the hand from oils, hydrocarbons, grease and abrasion
� Reinforced knit cuff
� Seamless liner prevents irritation
� Excellent resistance to abrasion
� Highly flexible coating
� Nitrile foam coating on nitrile. Polyester / nylon knit liner.
CAT II
EN388: 2003
4121
Sizes and Product Codes6/S 7/M 8/L 9/XL 10/XXL Case Qty
SHO3771 SHO3772 SHO3773 SHO3774 SHO3775 120
GENERAL HANDLING
380
4570
� Construction � Engineering � Instrumentation � Maintenance � Mechanical
� Construction � Engineering � Instrumentation � Maintenance � Mechanical
� Deck Crew � Engineers � Process Engineers� Pipe Fitters� Mechanical Fitters� Riggers
� Deck Crew � Engineers � Process Engineers� Pipe Fitters� Mechanical Fitters� Riggers
The microporous nitrile foam embossed �nish provides a strong grip in wet, dry or oily conditions. Ideal for precision tasks.
Fluorescence enhances visibility in poorly-lit environments. Engineered to deliver a secure grip in the most arduous oily, conditions.
Typical Applications
Typical Applications
Suitable Trades
Suitable Trades
MATERIALS
MATERIALS
KEY FEATURES
KEY FEATURES
� Embossed nitrile surface designed to disperse grease efficiently
� Lightweight nylon liner
� Seamless liner prevents irritation
� Anatomically engineered
� Increased safety in poor lighting conditions
� Excellent oil absorbency and grip
� Lightweight liner with colour coded elasticated cuffs to indicate different sizes
� Seamless liner prevents irritation
� Silicone free
� Nitrile foam coating. Nylon liner.
� Nitrile sponge coating. Nylon liner.
CAT II
CAT II
EN388: 2003
EN388: 2003
3121
4131
Sizes and Product Codes6/S 7/M 8/L 9/XL Case Qty
SHO3851 SHO3852 SHO3853 SHO3854 120
Sizes and Product Codes7/S 8/M 9/L 10/XL Case Qty
BST4570HV1 BST4570HV2 BST4570HV3 BST4570HV4 72
GENERAL HANDLING
28 29
GENERAL HANDLING
330
� Construction � Engineering � Maintenance � Rigging � Scaffolding
� Deck Crew � Labourers � Mechanical Engineers � Riggers� Scaffolders
Reinforced grip glove. Double latex coating in the area of the glove subject to most stress; between thumb and index �nger.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES � Extremely durable
� Rough latex surface provides a tactile feel and excellent grip
� Maximum resistance to rips
� Seamless liner prevents irritation
� Anatomically engineered
� Natural latex coating. Polyester / cotton liner.
CAT II
EN388: 2003
2142
Reinforced grip glove. Double latex coating in the area of the glove subject to most stress;
Sizes and Product Codes7/S 8/M 9/L 10/XL Case Qty
SHO3301 SHO3302 SHO3303 SHO3304 120
317
� Construction � Engineering � Maintenance � Rigging � Scaffolding
� Deck Crew � Labourers� Mechanical Engineers � Pipe Fitters � Riggers � Scaffolders
High visibility grip glove with luminous markings. For manual handling in poorly-lit environments.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES � Phosphorescent luminous markings
� Rough latex surface provides a tactile feel and excellent grip
� Seamless liner prevents irritation
� Protects the hand in damp environments or against aggressive detergents or alcohols
� Antibacterial and anti-odour treatment
� Natural latex coating. Polyester liner.
CAT II
EN388: 2003
2142
Sizes and Product Codes7/S 8/M 9/L 10/XL Case Qty
SHO3171 SHO3172 SHO3173 SHO3174 120
OHIO™
� Construction � Engineering � Maintenance � Mechanical
� Deck Crew � Engineers � Mechanical Fitters � Pipe Fitters � Process Engineers� Riggers� Roustabout
Durable and �exible PVC sponge touch coating using hydropellent technology provides excellent grip in oily, wet and dry handling conditions whilst maintaining good tactility. Extremely resistant to abrasion.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES � Anatomically designed for comfort, dexterity and fit� Lint and silicone free� HPT foam coating containing encapsulated air molecules provides
an inherent cushioning effect� Breathable back of glove to minimise perspiration� Seamless liner prevents irritation� Knitted wrist provides a secure fit
� HPT foam coating. Nylon liner.
CAT II
EN388: 2003
4131
IDAHO™
� Construction � Engineering � Maintenance � Mechanical
� Deck Crew � Engineers � Mechanical Fitters � Pipe Fitters � Process Engineers� Riggers� Roustabout
Durable and �exible PVC sponge touch �nish coating using hydropellent technology covers the palm and extends over the knuckles. Provides excellent grip in oily, wet and dry handling conditions whilst maintaining good tactility. Extremely resistant to abrasion.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES � Anatomically designed for comfort, dexterity and fit� Durable and cost effective� Lint and silicone free� ¾ HPT foam coating containing encapsulated air molecules
provides an inherent cushioning effect� Seamless liner prevents irritation� Knitted wrist provides a secure fit
� HPT foam coating. Nylon liner.
CAT II
EN388: 2003
4131
Sizes and Product Codes7/S 8/M 9/L 10/XL Case Qty
SKY051 SKY052 SKY053 SKY054 120
Sizes and Product Codes7/S 8/M 9/L 10/XL 11/XXL Case Qty
SKY061 SKY062 SKY063 SKY064 SKY065 120
GENERAL HANDLING
30 31
GENERAL HANDLING
ARIA™
� Construction � Engineering � Instrumentation � Maintenance � Mechanical
� Deck Crew � Drillers � Engineers � Instrument Technicians � Mechanical Fitters � Pipe Fitters � Process Engineers� Riggers� Roustabout
With class-leading durability, Aria protects for long periods when carrying out a multitude of manual handling tasks.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES � Anatomically engineered for a comfortable fit
� Excellent grip in damp, oily and dry handling conditions
� Enhanced lifecycle through increased resistance to abrasion and tearing
� Tested for harmful substances according to Oeko-Tex® Standard 100
� Breathable liner keeps hands cool
� NFT™ Nitrile foam coating. Nylon/spandex liner.
CAT II
EN388: 2003
4141
NINJA LITE™
� Engineering � Instrumentation � Maintenance � Mechanical
� Engineers � Instrument Technicians � Mechanical Fitters � Process Engineers
Ultra lightweight (18gg) glove providing excellent second skin comfort as well as outstanding �exibility and a tactile touch. Protects the hand from oils, grease and abrasion, with e�ective grip. Ideal for intricate tasks and for preventing product contamination.
Typical Applications Suitable Trades
MATERIALS
KEY FEATURES � Lightweight (18 gauge) and close fitting for excellent dexterity � Maximum flexibility and movement for the most intricate of tasks� Breathable back to glove to minimise perspiration� Elasticated wrist provides a secure and comfortable fit� Lint free, reducing the risk of product contamination� Seamless liner prevents irritation
� Polyurethane coating. Nylon/lycra liner.
CAT II
EN388: 2003
4131
LIGHTWEIGHT 18gg LINER
Sizes and Product Codes7/S 8/M 9/L 10/XL Case Qty
SKY491 SKY492 SKY493 SKY494 120
Sizes and Product Codes7/S 8/M 9/L 10/XL 11/XXL Case Qty
SKY121 SKY122 SKY123 SKY124 SKY125 120
EN420 StandardThe way the glove �ts the user is a crucial factor in the dexterity of the working hand.
Testing Prior to UsingIf the glove is too small, it cuts o� the blood circulation and restricts the movement of the hand. On the contrary, loose gloves slip o� at the slightest movement and make handling very imprecise.
11109876
XXLXLLMS
To check the sizePlace your right hand on the diagram, the blue line should be between your thumb and index �nger.
Glove size further to EN420
Hand (mm) Glove
Palm circumference Length Minimum Length
6 152 160 220
7 178 170 230
8 203 182 240
9 229 192 250
10 254 204 260
11 279 215 270
HAND SIZE CHART
32 33
A GREATER COMMITMENT TO HEALTH AND SAFETY EN STANDARDS FOR HAND PROTECTION
The Single European Act includes a speci�c pledge to improve health and safety at work for all European workers.
The commitment to ‘level up’ to the best practice currently employed within the Union has been enshrined in a legally binding Framework Directive (89/391/EEC), which not only lays down broad guidelines for health and safety but also places upon the employer an absolute duty “to ensure the safety and health of employees in their workplace”. This directive is ampli�ed by �ve daughter directives, of which one directly governs the use of protective gloves.
The Use of Personal Protective Equipment Directive 89/656/EEC Four articles of the Directive merit particular attention, as they place substantial responsibilities on employers:
ARTICLE 3 states that before selecting any PPE, a basic assessment must be made to identify and evaluate the risk. Where possible, the risk must be reduced or eliminated by a modi�cation of workplace practice. This option is always to be preferred to the use of PPE.
Under ARTICLE 4, the employer must inform his workers of the risks in the workplace, supply appropriate and correctly �tting PPE which complies with EU standards, and give adequate instruction in its use. He should further ensure that the PPE is used only for the purpose intended by the manufacturer, and in accordance with the manufacturer’s instructions.
ARTICLE 5 requires the employer to:1. Audit workplace hazards and assess the level of risk to employees.2. De�ne the properties necessary in the gloves to protect the employees.3. Ensure that all gloves used in the workplace conform to the PPE Directive and relevant EN standards.4. Compare the merits of the various types of protection available.5. Keep full records of assessments and reasons for selecting a particular type of glove. If the risk should alter in any way, for instance by the introduction of a new chemical or industrial process, the assessment must be repeated.
Finally, ARTICLE 6 requires Member States to introduce written rules for workplace situations in which the use of PPE shall be considered compulsory. Naturally, employers will have to be aware of and comply with these rules.
To comply with the new regulations, you must select gloves which not only adhere to the above Directive and relevant safety standards, but also are demonstrably of good quality and �ttest for the intended task.
COMPLYING WITH THE PPE DIRECTIVE: 89/686/EECThe Directive speci�es two classes of glove meeting two levels of risk: ‘Minimal’ and ‘mortal’ or ‘irreversible’ risk. A risk which falls between these two levels may be described as ‘intermediate’. To comply with the 89/656/EEC Directive, you must establish the level of risk and select gloves of the appropriate class.
A system of marking has been developed to help you in that selection.
Gloves of simple design - for minimal risk onlyFor gloves of simple design o�ering protection from low level risks, e.g. janitorial gloves, manufacturers are permitted to test and certify gloves themselves.
Gloves of this category are CE-marked as follows:
Gloves of intermediate design - for intermediate riskGloves designed to protect against intermediate risk, e.g. generalhandling gloves requiring good cut, puncture and abrasion performance, must be subjected to independent testing and certi�cation by a Noti�ed Body. Only these approved Bodies may issue a CE mark, without which the gloves may not be sold. Each Noti�ed Body has its own identi�cation number. The name and address of the Noti�ed Body that certi�es the product has to appear on the instructions for use that will accompany the gloves.
Gloves of intermediate design are CE-marked as follows:
Gloves of complex design - for irreversible or mortal riskGloves designed to protect against the highest levels of risk e.g.chemicals, must also be tested and certi�ed by a Noti�ed Body. In addition, the quality assurance system used by the manufacturer to guarantee homogeneity of production must be independently checked. The Body carrying out this evaluation will be identi�ed by a number which must appear alongside the CE mark (in this case, 0120).
Gloves of complex design are CE-marked as follows:
Please note that the original PPE Directive 89/686/EEC has beenamended by both the 93/95/EEC Directive and the CE MarkingDirectives 93/68/EEC and 95/58 EEC.
RAISING STANDARDS IN EUROPEThe primary aim of the Personal Protective Equipment Directive is to improve safety at work. This is achieved by establishing standards for manufacture and use that will apply throughout the Union; and this is the remit of the Committee for European Normalisation (CEN). The committee is made up of representatives of the national standards organisations in each of the Member States plus EFTA, along with major European PPE manufacturers.
If you would like any further clari�cation of these Directives, or further information on testing and certi�cation procedures, please contact our Technical Service.
0120
DIRECTIVES CE INFORMATIONThe Personal Protective Equipment Directives (89/686/CEE) and (93/68/CEE) have been enacted by the European Community to ensure harmonisation of regulations regarding testing of all PPE sold within the community.
All gloves of intermediate and complex design must now be tested independently to ascertain their performance and ensure their safety. They must, if they meet these standards, carry a CE Mark on the gloves, or on their packaging when this is not practical.
CATEGORISATIONUnder the terms of the above directive, gloves fall into the following three categories:
CAT I - Simple DesignFor minimal risks only. Suitable only for low risk applications where hazards can be identi�ed by the wearer in time to deal with them.
CAT II - Intermediate DesignReversible risks. Products are type examined by an approved body where they examine the manufacturers technical speci�cations and conduct tests for the relevant standards to ascertain their conformity and/or performance.
CAT III - Complex DesignFor protection against mortal danger or risks of irreversible harm. Products are type examined by an approved body as for category II. In addition, the products and manufacturer are subject to EC quality control according to an approved quality system.
EUROPEAN STANDARDS (ENs)
GENERAL REQUIREMENTS EN420
De�nes the general requirements for most types of protective gloves including:• Design and construction• Suitability for purpose• Sizing• Comfort and efficiency• Innocuousness
Ratings
MECHANICAL HAZARDS EN388
a b c d
Resistance to abrasionBlade cut resistanceTear resistancePuncture resistance
0-40-50-40-4
THERMAL (HEAT) HAZARDS EN407
a b c def
Resistance to flamabilityContact heat resistanceConvective heat resistanceRadiant heat resistanceResistance to small molten metal splashResistance to large molten metal splash
0-40-40-40-40-40-4
ANTI-STATIC
New EN1149 standard
No pictogram is to be shown
PassorFail
CHEMICAL AND MICRO-ORGANISMS EN374
EN374-2 Resistance to penetration by micro-organisms.Referred to as acceptable quality level (AQL).
1-3
EN374-3 Resistance to chemical hazards - permeation
1-6
PROTECTION FROM COLD EN511
a. b. c.
Resistance to convective coldResistance to contact coldPermeability of water
0-40-40-1
When scores are given, the higher the score the better the performance. 0 denotes a fail and X denotes no test.
OTHER HAND PROTECTION STANDARDS
FOOD HANDLING
RADIOACTIVE CONTAMINATION
IONISING RADIATION
LOW CHEMICAL RESISTANT
Identi�cation of manufacturer
Size
Glove designation
Approved body number
The CE mark
SKYTECNINJA LITE
9/L
98/0120
CHEMICAL RESISTANCE PERMEATION
In compliance with EN374 Standard, the breakthrough time is given as a permeation index according to the following table:
The breakthrough time (in minutes) of a chemical through the glove is measured in conditions simulating a total immersion of the glove in the chemical at 23˚C. The gloves scoring the highest index have the best resistance to permeation. Index 0 denotes breakthrough time is less than 10 minutes.
Breakthrough timehigher than (in minutes)
10 30 60 120 240 480
Permeation index 1 2 3 4 5 6
34 35
SCOPEThis standard de�nes the general requirements for glove designand construction, innocuousness, comfort, e�ciency, marking and information applicable to all protective gloves. This standard can also apply to arm guards. The key points are given below. Some gloves designed for very specialist applications, such as electrician’s or surgical gloves are governed by other stringent job-speci�c standards (Details are available on request).
DEFINITIONA glove is an item of personal protective equipment which protects the hand or any part of the hand from hazards. It may also cover part of the forearm and arm. A performance level is a number (between 0 and 4) which shows how a glove has performed in a speci�c test, and by which the results of that testing may be graded. Level 0 indicates that the glove is either untested or falls below the minimum performance level. A performance level X means that the testing method is not suitable for the glove sample. Higher numbers indicate higher levels of performance.
GLOVE CONSTRUCTION AND DESIGN• Gloves have to offer the greatest degree of protection in the foreseeable conditions of end use.• When seams are included, the strength of these seams should not reduce the overall performance of the glove.
INNOCUOUSNESS• The gloves themselves shouldn’t cause any harm to the user• PH of the glove should be between 3.5 and 9.5• Chromium (VI) content should be below detection (<10 ppm)• Natural rubber gloves shall be tested on extractable proteins as per EN 455-3.
CLEANING INSTRUCTIONS• If care instructions are provided, the levels of performance should not be reduced after the maximum recommended number of cleaning cycles.
ELECTROSTATIC PROPERTIES• Anti-static gloves that are designed to reduce the risk of electrostatic discharges shall be tested as per EN 1149• Obtained test values are to be reported on the Instructions for Use• An electrostatic pictogram shall NOT be used
SIZING (SEE TABLE BELOW)• Gloves that are below the minimum length are to be called ‘Fit for Special Purpose’.
STANDARD EN 420: 2003GENERAL REQUIREMENTS FOR PROTECTIVE GLOVES
DEXTERITY• If required, performance to be graded as per table at the foot of the page.
WATER VAPOUR TRANSMISSION AND ABSORPTION• If required, gloves shall allow water vapour transmission (5mg cm2.h)• If gloves exclude water vapour transmission, it should be at least 8mg/cm2 for 8 hours.
MARKING & INFORMATION:Marking of the glove• Each glove should be marked with: - Name of manufacturer - Glove and size designation - CE mark - Appropriate pictograms accompanied by the relevant performance levels and the reference of the EN standard.
• The marking should be legible throughout the life of the glove. Where marking of the glove is not possible in view of the characteristics of the glove, it should be mentioned on the �rst packaging enclosure.
Marking of the packaging immediately containing the gloves• Name and address of the manufacturer or representative• Glove and size designation• CE mark• Usage info - Simple design: “for minimal risks only” - Intermediate design or complex design: relevant pictograms - When protection is limited to part of the hand, this shall be mentioned (e.g. “Palm Protection style only”)• Reference to where information can be obtained
Instructions for Use (To be supplied when the glove is placed on the market)• Name and address of the manufacturer or representative• Glove designation• Size range available• CE mark• Care and storage instruction• Instructions and limitations of use• A list of substances used in the glove which are known to cause allergies• A list of all substances in the glove shall be made available upon request• Name and address of Notified Body that certified the product
SIZING OF GLOVESGlove size Fits hand size Hand circumference/length (mm) Minimum length of the glove (mm)
6 6 152/160 2207 7 178/171 2308 8 203/182 2409 9 229/192 250
10 10 254/204 26011 11 279/215 270
Performance level Smallest diameter of pin that can be picked up with gloved hand 3 times/30 seconds (mm)1 11.02 9.53 8.04 6.55 5.0
EN420
SCOPEThis standard applies to gloves to protect from Ionising Radiation andRadioactive Contamination.
DEFINITION AND REQUIREMENTSThe nature of protection is shown by a pictogram relating to the speci�c protective qualities.• To protect from radioactive contamination, the glove has to be liquidproof and needs to pass the penetration test de�ned in EN 374.
STANDARD EN 421: 1994GLOVES GIVING PROTECTION FROM RADIOACTIVE CONTAMINATION AND IONISING RADIATION
• For gloves used in containment enclosures, the glove shall o�er high resistance to permeability of water vapour.• To protect from ionising radiation, the glove has to contain a certain amount of lead, quoted as “lead equivalence”. This Lead Equivalence must be marked on each glove.• Materials exposed to ionising radiation may be modelled by their behaviour to ozone cracking. This test is optional and can be used as an aid to selecting gloves which require resistance to ionising radiation.
SCOPEThis standard applies to all kinds of protective gloves in respectof physical and mechanical aggressions caused by abrasion, blade cut, puncture and tearing.
DEFINITION AND REQUIREMENTSProtection against mechanical hazards is expressed by a pictogram followed by four numbers (performance levels), each representing test performance against a speci�c hazard.
STANDARD EN 388: 2003GLOVES GIVING PROTECTION FROM MECHANICAL RISKS
The ‘Mechanical Risks’ pictogram is accompanied by a 4-digit code:
a. Resistance to abrasion Based on the number of cycles required to abrade through the sample given.
b. Blade cut resistance Based on the number of cycles required to cut through the sample at a constant speed.
c. Tear resistance Based on the amount of force required to tear the sample.
d. Puncture resistance Based on the amount of force required to pierce the sample with a standard sized point.
In all cases, (0) indicates the lowest level of performance, as follows:
a b c d
EN388 TEST PERFORMANCE LEVEL RATING:0 1 2 3 4 5
a. Abrasion resistance (cycles) < 100 100 500 2000 8000
b. Blade cut resistance (factor) < 1.2 1.2 2.5 5.0 10.0 20.0
c. Tear resistance (newton) < 10 10 25 50 75
d. Puncture resistance (newton) < 20 20 60 100 150
These performance levels must be prominently displayed alongside the pictogram on the packaging which immediately contains the gloves.
EN388 / EN421
36 37
SCOPEThis standard applies to any gloves to protect the hands againstconvective and contact cold down to -50oC.
DEFINITION AND REQUIREMENTSProtection against cold is expressed by a pictogram followed by a series of 3 performance levels, relating to speci�c protective qualities. The ‘cold hazard’ pictogram is accompanied by a 3-digit number:a. Resistance to convective cold (performance level 0 - 4)
b. Resistance to contact cold (performance level 0 - 4)
c. Permeability by water (0 or 1)
STANDARD EN 511: 2006GLOVES GIVING PROTECTION FROM COLD
All gloves must achieve at least EN388 performance level 1 for abrasion and tear.
• Convective cold resistance: based on the thermal insulation properties of the glove which are obtained by measuring the transfer of cold via convection.
• Contact cold resistance: based on the thermal resistance of the glove material when exposed to contact with a cold object.
• Water impermeability: 0 = water penetration after 30 minutes of exposure 1 = no water penetration.
A B C
SCOPEThis standard speci�es thermal performance for protective gloves against heat and/or �re.
DEFINITION AND REQUIREMENTSThe nature and degree of protection is shown by a pictogram followed by a series of six performance levels, relating to speci�c protective qualities. Gloves must also achieve at least Performance level 1 for abrasion and tear.
The ‘heat and �ame’ pictogram is accompanied by a 6-digit number:
a. Resistance to �ammability (performance level 0-4) Based on the length of time the material continues to burn and glow after the source of ignition is removed. The seams of the glove shall not come apart after an ignition time of 15 seconds.
b. Contact heat resistance (performance level 0-4) Based on the temperature range (100-500oC) at which the user will feel no pain for at least 15 seconds. If an EN level 3 or higher is obtained, the product shall record at least EN level 3 in the �ammability test. Otherwise, the maximum contact heat level shall be reported as level 2.
STANDARD EN 407: 2004GLOVES GIVING PROTECTION FROM THERMAL HAZARDS
c. Convective heat resistance (performance level 0-4) Based on the length of time the glove is able to delay the transfer of heat from a �ame. A performance level shall only be mentioned if a performance level of 3 or 4 is obtained in the �ammability test.
d. Radiant heat resistance (performance level 0-4) Based on the length of time the glove is able to delay the transfer of heat when exposed to a radiant heat source. A performance level shall only be mentioned if a performance level 3 or 4 is obtained in the �ammability test.
e. Resistance to small splashes of molten metal (performance level 0-4) The number of molten metal drops required to heat the glove sample to a given level. A performance level shall only be mentioned if a performance level 3 or 4 is obtained in the �ammability test.
f. Resistance to large splashes of molten metal (performance level 0-4) The weight of molten metal required to cause smoothing or pinholing across a simulated skin placed directly behind the glove sample. The test is failed if metal droplets remain stuck to the glove material or if the specimen ignites.
a b c d e f
EN407 / EN511
SCOPEThis standard speci�es the capability of gloves to protect the useragainst chemicals and/or micro-organisms.
DEFINITIONS:PenetrationThe movement of a chemical and/or micro-organism through porous materials, seam, pinholes or other imperfections in a protective glove material at a non-molecular level.
PermeationThe rubber and plastic �lms in gloves do not always act as
The ‘Chemical resistant’ glove pictogram must be accompanied by a 3-digit code. This code refers to 3 chemicals (from a list of 12 standard de�ned chemicals) for which a breakthrough time of at least 30 minutes has been obtained.
The ‘Low Chemical resistant’ or ‘Waterproof’ glove pictogram is to be used for those gloves that do not achieve a breakthrough time of at least 30 minutes against at least three chemicals from the de�ned list, but which comply with the Penetration test.
The ‘Micro-organism’ pictogram is to be used when the glove conforms to at least a performance level 2 for the Penetration test.
Warning: The chemical data information does not necessarily re�ect the actual duration in the workplace.
Permeation: Each chemical tested is classi�ed in terms of breakthrough time (performance level 0 to 6):
STANDARD EN 374: 2003GLOVES GIVING PROTECTION FROM CHEMICALS AND MICRO-ORGANISMS
barriers to liquids. Sometimes they can act as sponges, soaking up the liquids and holding them against the skin. It is therefore necessary to measure breakthrough times, or the time taken for the hazardous liquid to come in contact with the skin.
REQUIREMENTS• The minimum liquid proof section of the glove shall be at least equal to the minimum length of the glove speci�ed in EN 420.• Penetration: A glove shall not leak when tested to an air and/or water leak test, and shall be tested and inspected in compliance with the Acceptable Quality Level.
AQL: Performance level Acceptable quality level unit Inspection levels
Level 3 < 0.65 G1
Level 2 < 1.5 G1
Level 1 < 4.0 S4
Code Chemical CAS Number Class
A Methanol 67-56-1 Primary alcohol
B Acetone 67-64-1 Ketone
C Acetonitrile 75-05-8 Nitrile compound
D Dichloromethane 75-09-2 Chlorinated para�n
E Carbone disulphide 75-15-0 Sulphur containing Organic compound
F Toluene 108-88-3 Aromatic hydrocarbon
G Diethylamine 109-89-7 Amine
H Tetrahydrofurane 109-99-9 Heterocyclic and Ether compound
I Ethyl acetate 141-78-6 Ether
J N-Heptane 142-85-5 Saturated Hydrocarbon
K Sodium hydroxide 40% 1310-73-2 Inorganic base
L Sulphuric acid 96% 7664-93-9 Inorganic mineral acid
Measured breakthrough time Protection Index Measured breakthrough time Protection Index
> 10 minutes Class 1 > 120 minutes Class 4
> 30 minutes Class 2 > 240 minutes Class 5
> 60 minutes Class 3 > 480 minutes Class 6
A B C
EN374
39
Globus and Skytec are registered trademarks of Globus (Shetland) Ltd. All other company names and products are trade names or registered trademarks of their respective companies.
38 39
UK AND IRELANDwww.globus.co.ukE: [email protected]: +44 (0)161 877 4747F: +44 (0)161 877 4746Globus (Shetland) Ltd 14 Central Park Tra�ord Park Manchester M17 1NY UNITED KINGDOM
MIDDLE EAST AND AFRICAwww.globusgroup.com/gccE: [email protected]: +971 4 882 9962F: +971 4 882 9963Globus EMEA FZE Jafza View 19 Floor 9 O�ce 0904 Jebel Ali DubaiUNITED ARAB EMIRATES © 2015 Globus (Shetland) Ltd | GLOBUS-BROCH-OIL_GAS-0515