Redesign of reciprocating type plunger pump.
-
Upload
minerva-english -
Category
Documents
-
view
99 -
download
5
description
Transcript of Redesign of reciprocating type plunger pump.
![Page 1: Redesign of reciprocating type plunger pump.](https://reader033.fdocuments.us/reader033/viewer/2022061500/56813079550346895d965489/html5/thumbnails/1.jpg)
REDESIGN OF RECIPROCATING TYPE PLUNGER PUMP.
PROJECT GUIDE:A.RAMPRAKASH,M.E.,
PROJECTMEMBERS:P.VINOTHKUMARK.VINOTHT.KANNANB.RAJASEKARAN
![Page 2: Redesign of reciprocating type plunger pump.](https://reader033.fdocuments.us/reader033/viewer/2022061500/56813079550346895d965489/html5/thumbnails/2.jpg)
PLUNGER PUMPS.
Plunger pumps are reciprocating type positive displacement pumps.
Fluid flows through the suction valve and into the chamber as the plunger recedes. At the end of thestroke, the chamber is at its maximum size.
The suction valve closes, the plunger moves forward into the chamber, forcing the fluid out the discharge valve. The flow from each chamber is a pulse flow.
![Page 3: Redesign of reciprocating type plunger pump.](https://reader033.fdocuments.us/reader033/viewer/2022061500/56813079550346895d965489/html5/thumbnails/3.jpg)
CONTD…
A plunger pump where the high-pressure seal is stationary and a smooth cylindrical plunger slides through the seal.
This type of pump is often used to transfer municipal and industrial sewage.
The volume of fluid discharged is equal to the area of plunger ,multiplied by its stroke length. the number of the plunger and the speed of the drive.
![Page 4: Redesign of reciprocating type plunger pump.](https://reader033.fdocuments.us/reader033/viewer/2022061500/56813079550346895d965489/html5/thumbnails/4.jpg)
PRACTICAL APPLICATION
Agro sprayer .
Water service for vechicles .
Fire service applications.
Toilet cleaner.
![Page 5: Redesign of reciprocating type plunger pump.](https://reader033.fdocuments.us/reader033/viewer/2022061500/56813079550346895d965489/html5/thumbnails/5.jpg)
PROBLEMS.
In current model, the operating gun is having pulsation. Because the pulsation dampener is not effective.
So, It is a problem to operator to handle the gun.
The plunger material having more problems due to low hardness (38 HRC).
So, we planned to improve the hardness property of plunger material.
![Page 6: Redesign of reciprocating type plunger pump.](https://reader033.fdocuments.us/reader033/viewer/2022061500/56813079550346895d965489/html5/thumbnails/6.jpg)
OBJECTIVES.
By Redesign the pulsation dampener to reduce the pulsation.
By Changing the plunger material according to hardness property.
![Page 7: Redesign of reciprocating type plunger pump.](https://reader033.fdocuments.us/reader033/viewer/2022061500/56813079550346895d965489/html5/thumbnails/7.jpg)
PULSATION DAMPENER Pulsation dampeners is a temporary storage
and pulsation control device.
Pulsation dampeners are used to reduce suction and discharge pressure pulsations.
At the forward stroke water will fill the dampener.
At the return stroke water is discharged.
So, the flow is balanced to equal discharge.
![Page 8: Redesign of reciprocating type plunger pump.](https://reader033.fdocuments.us/reader033/viewer/2022061500/56813079550346895d965489/html5/thumbnails/8.jpg)
CONTD…
In the plunger pump it is located at the discharge potion.
Cylindrical hollow dampener having atmospheric
pressure.
The present model pulsation dampener is show in fig.
![Page 9: Redesign of reciprocating type plunger pump.](https://reader033.fdocuments.us/reader033/viewer/2022061500/56813079550346895d965489/html5/thumbnails/9.jpg)
REDESIGN OF PULSATION DAMPENER. In the current pulsation dampener is
operated in the atmospheric pressure. So, the discharge gun is having some pulsations.
In new design, the pulsation dampener is divided into two parts ,the diaphragm rubber is fixed between the two parts .
Types of pulsation dampener. Air loaded at 18 bar with diaphragm .
Spring loaded at 18 bar with diaphragm.
![Page 10: Redesign of reciprocating type plunger pump.](https://reader033.fdocuments.us/reader033/viewer/2022061500/56813079550346895d965489/html5/thumbnails/10.jpg)
AT FORWARD STROKE
![Page 11: Redesign of reciprocating type plunger pump.](https://reader033.fdocuments.us/reader033/viewer/2022061500/56813079550346895d965489/html5/thumbnails/11.jpg)
AT RETURN STROKE
![Page 12: Redesign of reciprocating type plunger pump.](https://reader033.fdocuments.us/reader033/viewer/2022061500/56813079550346895d965489/html5/thumbnails/12.jpg)
DESIGN OF AIR LOADED PULSATION DAMPENER.
![Page 13: Redesign of reciprocating type plunger pump.](https://reader033.fdocuments.us/reader033/viewer/2022061500/56813079550346895d965489/html5/thumbnails/13.jpg)
AT FORWARD STROKE
![Page 14: Redesign of reciprocating type plunger pump.](https://reader033.fdocuments.us/reader033/viewer/2022061500/56813079550346895d965489/html5/thumbnails/14.jpg)
AT RETURN STROKE
![Page 15: Redesign of reciprocating type plunger pump.](https://reader033.fdocuments.us/reader033/viewer/2022061500/56813079550346895d965489/html5/thumbnails/15.jpg)
DESIGN OF SPRING LOADED PULSATION DAMPENER.
![Page 16: Redesign of reciprocating type plunger pump.](https://reader033.fdocuments.us/reader033/viewer/2022061500/56813079550346895d965489/html5/thumbnails/16.jpg)
FUNCTION OF PULSATION DAMPENER
![Page 17: Redesign of reciprocating type plunger pump.](https://reader033.fdocuments.us/reader033/viewer/2022061500/56813079550346895d965489/html5/thumbnails/17.jpg)
ALTERNATIVE MATERIAL FOR PLUNGER.
The company is now using ss410 as plunger material.
It have more drawback in hardness, corrosion ,wear and tear.
hardness of ss410 is 38 HRC
So, we planned to change the material with higher hardness than present material .
![Page 18: Redesign of reciprocating type plunger pump.](https://reader033.fdocuments.us/reader033/viewer/2022061500/56813079550346895d965489/html5/thumbnails/18.jpg)
EXISTING MATERIAL (SS-410)
Chemistry properties.
Carbon 0.15 max Chromium 11.5 - 13.5
Iron Balance Manganese 1 max
Phosphorus 0.04 max
Silicon 1 max Sulphur 0.03 max
![Page 19: Redesign of reciprocating type plunger pump.](https://reader033.fdocuments.us/reader033/viewer/2022061500/56813079550346895d965489/html5/thumbnails/19.jpg)
ALTERNATIVE MATERIALS
The alternatives are
Ss304 ( hardness 50-HRC )
Ss410 with harden and ceramic coating ( hardness 83-HRC)
![Page 20: Redesign of reciprocating type plunger pump.](https://reader033.fdocuments.us/reader033/viewer/2022061500/56813079550346895d965489/html5/thumbnails/20.jpg)
SS-304 PROPERTIES
Fe 64.99-74%
Ni 8%
Mn 2%
S 0.03%
C 0.08%
Si 0.75%
![Page 21: Redesign of reciprocating type plunger pump.](https://reader033.fdocuments.us/reader033/viewer/2022061500/56813079550346895d965489/html5/thumbnails/21.jpg)
SS-410 WITH CERAMIC COATING
PROPERTIES UNITS CN-178
Colour - Grey
Hardness HRC 83
SiC Content % 75
Density Grams / cc. 2.5 - 2.6
![Page 22: Redesign of reciprocating type plunger pump.](https://reader033.fdocuments.us/reader033/viewer/2022061500/56813079550346895d965489/html5/thumbnails/22.jpg)
COMPARISSION OF MATERIALS
properties ss410 ss304 Ss410 with ceramic coat
Corrosion high < ss410 < ss304
Hardness 38 HRC 50HRC 83HRC
Repair/month 12 <6 <2
With stand in high pressure
medium >ss410 >ss304
![Page 23: Redesign of reciprocating type plunger pump.](https://reader033.fdocuments.us/reader033/viewer/2022061500/56813079550346895d965489/html5/thumbnails/23.jpg)
THANK YOU…