Rebuild and Overhaul Service · 2015. 3. 3. · 128 _____ Warner Electric/Formsprag (800-927-3262)...
1
128 ________________________________________________ Warner Electric/Formsprag (800-927-3262) www.formsprag.com Formsprag Rebuild Service Department can refurbish your overrunning clutches. We take your worn, scaled, seized, scored, or rough running clutches and make them like new…for substantially less than the replacement cost. As a major manufacturer of overrunning clutches, we have the people, facilities, and experience to rebuild and replace all components as needed. The same standards of excellence that exist in the manufacture of original equipment clutches are closely adhered to in the overhaul procedure of every rebuilt clutch. The Rebuild Service Department will perform the following procedures to restore your overrunning clutches to original specifications with a new warranty: • Clean • Inspect • Rework worn races or… • Replace unsalvageable races • Replace sprags • Replace bearings and other internal components • Retrofit with design improvements. We’re also interested in helping you prevent problems and failures. We can recommend a preventive maintenance schedule for all your clutches. Contact your Warner Electric representa- tive or our Warren Plant for details on our cost-saving program. Send us your old clutches. . . we’ll make them like new again! Rebuild and Overhaul Service Rebuilt. . . As received. . . Tel: (O11) 4222-5040 Fax: (011) 4201-2478. [email protected] - www.tekmatic.com.ar
Transcript of Rebuild and Overhaul Service · 2015. 3. 3. · 128 _____ Warner Electric/Formsprag (800-927-3262)...
128 ________________________________________________ Warner Electric/Formsprag (800-927-3262) www.formsprag.com
Formsprag Rebuild Service Departmentcan refurbish your overrunning clutches.We take your worn, scaled, seized,scored, or rough running clutches andmake them like new…for substantially less than the replacement cost.
As a major manufacturer of overrunningclutches, we have the people, facilities,and experience to rebuild and replace all components as needed. The samestandards of excellence that exist in the manufacture of original equipmentclutches are closely adhered to in theoverhaul procedure of every rebuilt clutch.
The Rebuild Service Department willperform the following procedures torestore your overrunning clutches tooriginal specifications with a newwarranty:
• Clean
• Inspect
• Rework worn races or…
• Replace unsalvageable races
• Replace sprags
• Replace bearings and other internal components
• Retrofit with design improvements.
We’re also interested in helping you prevent problems and failures. We canrecommend a preventive maintenanceschedule for all your clutches.
Contact your Warner Electric representa-tive or our Warren Plant for details on ourcost-saving program.
Send us your old clutches. . .we’ll make them like new again!
Rebuild and Overhaul Service
Rebuilt. . .
Asreceived. . .
Tel: (O11) 4222-5040 Fax: (011) [email protected] - www.tekmatic.com.ar
