Rear Trailing Arm - Pfadt Race Engineering Rear Trailing Arm Kit is designed to replace the OEM rear...

Rev 1.0 4/12/2010 1 Product: Rear Trailing Arm Part umber: 1410118 Applications: Chevrolet Camaro, 2010-Present Description: The Rear Trailing Arm Kit is designed to replace the OEM rear trailing arm. The Pfadt Rear Trailing Arm reduces deflection and increases strength of the suspension in extreme performance applications.

Upload
phungkhanh
Category

Documents
view
237
download
5

Embed Size (px):

Transcript of Rear Trailing Arm - Pfadt Race Engineering Rear Trailing Arm Kit is designed to replace the OEM rear...

Page 1: Rear Trailing Arm - Pfadt Race Engineering Rear Trailing Arm Kit is designed to replace the OEM rear trailing arm. The Pfadt Rear Trailing Arm reduces deflection and increases strength

Rev 1.0 4/12/2010 1

Product:

Rear Trailing Arm

Part �umber:

1410118

Applications:

Chevrolet Camaro, 2010-Present

Description:

The Rear Trailing Arm Kit is designed to replace the OEM rear

trailing arm. The Pfadt Rear Trailing Arm reduces deflection and

increases strength of the suspension in extreme performance

applications.

Page 2: Rear Trailing Arm - Pfadt Race Engineering Rear Trailing Arm Kit is designed to replace the OEM rear trailing arm. The Pfadt Rear Trailing Arm reduces deflection and increases strength

�

Rev 1.0 4/12/2010 2

What’s in the box:

(2) – Pfadt Trailing Arms

(1) – Package of 8 polyurethane bushings and 2 grease packets

(1) – Package of 4 anodized aluminum sleeves

Difficulty of Installation: Beginner |--------x------------------------------------| Advanced

Reason: This product is a very easy install.

Expected Installation Time: 1 Hour and 45 Minutes

Recommended Tools:

• 18mm Socket and Ratchet

• 18mm Box End Wrench

• Torque Wrench

• Press

Page 3: Rear Trailing Arm - Pfadt Race Engineering Rear Trailing Arm Kit is designed to replace the OEM rear trailing arm. The Pfadt Rear Trailing Arm reduces deflection and increases strength

谠˄

Rev 1.0 4/12/2010 3

Installation Procedure

OEM Part Removal

Safely lift and support the rear of the car and remove rear wheels.

Using the 18mm socket and 18mm box end wrench remove the two bolts and nuts

holding each trailing arm in the car.

Remove the trailing arm and press bushing from upright.

Page 4: Rear Trailing Arm - Pfadt Race Engineering Rear Trailing Arm Kit is designed to replace the OEM rear trailing arm. The Pfadt Rear Trailing Arm reduces deflection and increases strength

�

Rev 1.0 4/12/2010 4

�ew Part Installation

Clean the surfaces of the trailing arm and bushing as shown. Press the polyurethane

bushings into the trailing arm. The flange faces should be touching the sides of the

trailing arm.

Coat the outside of the aluminum sleeve. Coat the flange and inside of each bushing,

filling the grooves, with the provided grease.

Repeat this bushing installation procedure for the upright bushings.

Page 5: Rear Trailing Arm - Pfadt Race Engineering Rear Trailing Arm Kit is designed to replace the OEM rear trailing arm. The Pfadt Rear Trailing Arm reduces deflection and increases strength

ꇐ ◌֟

Rev 1.0 4/12/2010 5

Install new trailing arm.

Using the 18mm socket and 18mm box end wrench reinstall the two bolts and nuts

attaching the trailing arm to the chassis and torque.

At this point take a moment to check each bolt that was removed has been tightened.

Reinstall the wheels and safely lower car. Torque lug nuts.

Test drive and Enjoy!

Fastener Torque

Trailing Arm Bolts, M12 71 N-m (52 ft-lbs)

Please contact Pfadt Customer Support with any questions!

Page 6: Rear Trailing Arm - Pfadt Race Engineering Rear Trailing Arm Kit is designed to replace the OEM rear trailing arm. The Pfadt Rear Trailing Arm reduces deflection and increases strength

�

Rev 1.0 4/12/2010 6

2315 Decker Lake Blvd.

Salt Lake City, UT 84119

888-972-2464

www.PfadtRacing.com

Introduction to the Trailing Arm Replacement … Arm...Introduction to the Trailing Arm Replacement Procedure I had been noticing some strange behaviour in my 1979 Corvette for at

Spare parts Catalog · 2020. 9. 14. · AIXAM-MEGA Page 21 / 68 03/01/2012. Spare parts Rear axel Rep Reference Description Qty Remarks 1 5MB021A REAR TRAILING ARM ASSY COMPLETE 2

Steering, Brake & Suspension Specialists … Brake & Suspension Specialists. #6072ASQB - C-10 Rear Trailing Arm Anti-Squat Brackets Installation Instructions for 1960-72 C-10 Trucks

Trailing Arm Bushings Final

INSTRUCTIONS FOR: TRAILING ARM BUSH TOOL … ARM BUSH TOOL FORD MONDEO Mk4 MODEL No: VSE4784 1.1 GENERAL SAFETY IMPORTANT! These instructions are offered …

TRAILING ARM 1947 1954 CHEVY PICK-UP - No Limit …nolimit.net/tech/pdf/TRAILING-ARM-NEW.pdf · TRAILING ARM 1947 – 1954 CHEVY PICK-UP Congrats on choosing the best riding and handling

Spherical MQB Rear Trailing Arm Kit, MkVII … have all tools necessary for installation of the MQB Spherical MQB Rear Trailing Arm Kit. Step 2 – Using a hammer and punch, ...

COIL-OVER SUSPENSION KIT INSTALLATION INSTRUCTIONSfiles.dinancars.com/webresources/datasheets/42cb25... · Slowly lower rear trailing arm on both sides to remove pressure on the rear

Lower Trailing Arm Installation - Jegs High … THE AXLE WILL ROTATE AND THE TRAILING ARM INSTALLATION ... mechanic experienced in the installation and removal of suspension products;

INSTALLATION GUIDE - Total Control Products 7914-007 Trailing Arm 21-3/8” x 1-1/4” Link Tube 2 ... Refer to Installation Guide TCP TA2F9-33 for torque arm installation. Rear End

600 XC SP F/O Model #S02NP6ES Rev. 01pi54.com/corp/manuals/Parts/9917342r01.pdfKit, Trailing Arm Mount, LH Kit, Trailing Arm Mount, RH 25 5245836 1 Guard, Belt 26 7080416 2 Plug, Hole

REAR SUSPENSION - Adriatic Company...Trailing Arm– to– Body Bracket Bolt 70 – 90 55 – 66 Lateral Rod– to– Body Bracket Bolt 50 – 70 37 – 52 – Lateral Rod– to–

INSTALLATION OF HOTCHKIS PERFORMANCE … 16410006 Trailing Arm Bushing Sleeve, 65-70 Chevy B-body 2 8 12610006 Trailing Arm Head, Right Hand Thread - 65-70 Chevy B-body 1

REAR SUSPENSION - Ludicrous-Speed · REAR SUSPENSION Rear Trailing Link ST 927730000 INSTALLER & REMOVER SET D: ASSEMBLY 1. FRONT BUSHING Using the ST, press the bushing into trailing

Nissan Figaro Rear Trailing Arm Polyurethane Bush ... Trailing Arm Polyurethane Bush Replacement Fitting ... New Rear Trailing Arm Poly Polyurethane ... inner arm mounting hole and

TRAILER AIR SUSPENSION SYSTEMS - …graphicvillage.org/meritor/PB0226.pdfParts of Suspension (continued) Trailing Arm/Axle Terminology Trailing Arm: Sometimes referred to as Equalizing

Rear Lift Arm Hydraulic Cylinder PDF - rrproducts.com

GROUP 34 REAR SUSPENSION - Tearstonetearstone.com/eclipsefsm/2006_PS24S_MMNA_SM_PDF/GR00003200-34.pdfGROUP 34 REAR SUSPENSION CONTENTS ... suspension arms except a trailing arm connected

XJ 4-Link Rear Long Arm Instructions Parts ChecklistXJ front coil spring isolator –52000229 (2) ... XJ 4-Link Rear Long Arm Instructions . Rear Upper Control Arms ...

BIRRANA SMART STRUT - applidyne.com.au · struts at the front and suspension struts at the rear with the live rear axle located by a Panhard rod and a V-shaped trailing arm mounted

Rear Trailing Arm - Pfadt Race Engineering Rear Trailing Arm Kit is designed to replace the OEM rear...

Documents

Transcript of Rear Trailing Arm - Pfadt Race Engineering Rear Trailing Arm Kit is designed to replace the OEM rear...