Reach 40” Height 21” • Tap up to 1” (M30) • Variable speed control • High frequency...
description
Transcript of Reach 40” Height 21” • Tap up to 1” (M30) • Variable speed control • High frequency...
Reach 40” Height 21”• Tap up to 1” (M30)• Variable speed control• High frequency motor• Right and left hand speed control• Heavy duty cast aluminum construction• 1 motor 7 speed capabilities• 7 interchangeable speed modulesOPTIONS AVAILABLE• 220V Single Phase or 110V Single Phase• Vertical tapping• Vertical and Horizontal tapping (VH)• Tool lubrication with timer• Tapping depth control (vertical position only)
Tap up to
1”
ELECTRIC SERIES
Interchangeable Speed Modules for
Inch MetricR40510F 90rpm Module 5/16” - 7/8” M8-M22 #2 66 $950.00R40520F 170rpm Module 5/16” - 5/8” M8-M22 #2 58 $950.00R40530F 300rpm Module #0 - 9/16” M1.6-M14 #1 32 $580.00R40540F 550rpm Module #0 - 1/2” M1.6-M12 #1 18 $580.00R40550F 750rpm Module #0 - 3/8” M1.6-M10 #1 13 $580.00R40560F 1050rpm Module #0 - 5/16” M1.6-M8 #1 9 $580.00R40570F 2100rpm Module B16 4 $580.00Drill up to 5/16" ø
ListPrice
EDP Description Torque(ft·lbf)
Capacity Adapter Size
Modules can also be used for the 400 and 500 series
Brand Competition ROSCAMAT TIGERSpeed 2 speeds 150-500 RPM 7 speeds, 90-1050 RPM
Tapping Capacity M3-M24 M2-M27
Tapholder Size #2 Size #1, #2, #3
Weight 66 lbs. 66 lbs.
Design Sticks, Low Stability and Strength
Mono Arm Design: High Stability and Strength
Extra Equipment Electronic Equipment Outside
Electronic Equipment Built into Arm
Sensitivity No Balance, Dampers of low sensitivity
High sensitivity in any position
Cable Position Outside Inside
Framework Steel Aluminum
Lubrication Automatic Tool Lubrication with Compressed Air
Automatic Tool Lubrication with Electric Pump
THE COMPETITION
Reach 48” Height 32”• Tap up to 1 3/8” (M36)• Tap up to 1” (M27) in Horizontal• High frequency motor• Electronic speed control indicator• Right and left hand speed control• 1 motor 6 speed capabilities• 6 interchangeable speed modules• Tapping depth control (Vertical position only)• Heavy duty cast aluminum constructionOPTIONS AVAILABLE• 220V Single Phase or 110V Single Phase + transformer• Vertical tapping• Vertical and Horizontal tapping (VH)• Tool lubrication with timer
Tap up to
1-3/8”
ELECTRIC SERIES
Interchangeable Speed Modules for
Inch MetricR90510F 40rpm Module 1/2” - 1 3/8” M27-36 #3 251 $1,835.00R90520F 75rpm Module 5/16” - 7/8” M18-M27 #2 136 $1,535.00R90530F 140rpm Module 5/16” - 3/4” M18-M22 #2 70 $1,535.00R90540F 320rpm Module #0 - 9/16” M2-M16 #1 32 $1,145.00R95050F 500rpm Module #0 - 7/16” M2-M12 #1 21 $1,145.00R90560F 900rpm Module #0 - 5/16” M2-M8 #1 11 $1,390.00
ListPrice
EDP Description Torque(ft·lbf)
Capacity Adapter Size
Brand Competition ROSCAMAT SHARKSpeed 2 speeds 375 max RPM 6 speeds, 40-900 RPM
Tapping Capacity
M4-M30 M2-M36
Tapholder Size #2 Size #1, #2, #3
Weight 375 lbs. 95 lbs.
Motor Power 3-4 Kw (High Consumption) 2 Kw
Design Sticks, Low Stability and Strength
Mono Arm Design: High Stability and Strength
Sensitivity Dampers of Low Sensitivity Dampers of High Sensitivity
Framework Steel Aluminum
Lubrication Automatic Tool Lubrication with Compressed Air
Automatic Tool Lubrication with Electric Pump
THE COMPETITION