Press K1 and K3 to choose a channel, press UP, STOP DOWN to control the channel.

11.03.03.SMS-RE1101/1104YT-V1

4.Single control

Press UP and DOWN simultaneously once. Then press STOP once. Code learning is done.

single channel

RE1101

double channels

RE1102

K1K2

K3

16M

2 3 4 5 6 7 8

9 10 11 12 13 14 15 16

RE1103-16C

K1K2

K3

RE1103-4T

14 082 3 4

Su

K1K2

K3

RE1104

K1K2

K3

RE1104-i

down down down

down

16 channels

4 channels with timer 16 channels with 8 intermediate positions

16 channels with 3 intermediate positions

RE1101-1104 series instruction

03.Screen Emitter (take 16 channels as an sample)

6.Multi-channel control (screen emitter) note: short press K2, you can change between multi-channel control and single control

7.Cancel multi-channel control

75%

50%

25%

RE1101-i

25%

50%

75% down

single channel with 3 intermediate positions

learning button

back

75%

50%

25%

5. Percentage control

After code learning, press 25%,50%,75% to have percentage control.

.Channel Hiding8

MM

1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16

1 2 3 4 5 6 7 8

9 10 11 12 13

M

1 2 3 4 5 6 7 8

9 10 11 12 13

S S S

short press UP or STOP or

DOWN to final confirm,

the screen will show ” “.

Press K1 and K3 simultaneously to enter

hiding mode. The screen will show "CS”.

Press K1 to hide channels. Press

K3 to show again.

16 M

1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16

16 M

1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16

16 M

1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16

01 M1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16

16 M

1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16

06 M1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16

06 M1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16

01 M1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16

down down down

02.Double channels

Power： Model：

-10℃ +60℃（ ）

3V CR2032

：-20℃ +60℃（ ）

：

Working Temperature

working temperature ～

～ emitter without screen

emitter with screen

Currency：≤16mA

Code：rolling code

Frequency：433.92MHz

Long press K2 for 2 seconds to

enter multi-channel control mode.

The current channel will shine on

the screen.

Press K1 or K3 to choose a channel

and press K2 to confirm.

After choosing channels, press UP or STOP

or DOWN to final confirm. Now you can

control the channels together.

Long press K2 for 2 seconds to enter

multi-channel mode. The current

channel will shine on the screen.

Press K1 or K3 to choose the

channel that you want to cancel.

Press K2 to cancel the channel. Do

same to the other channels.

Press UP or STOP or DOWN to final confirm.

Now the channels are canceled.

Press UP and DOWN simultaneously once. Press STOP once. Code learning is done.

Repeat the operation to the other channel.

16 1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16

1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16

Press K1 or K3 to choose a channel.

The screen will show the channel

that is chose

Press UP and DOWN once

simultaneously.

Press STOP once. The code learning

is done. Repeat the operation to

other channels.

03 03

11.03.03.SMS-RE1101/1104YT-V1

RE1101-1104 series instruction

10.Smart position Function (for RE1104、RE1104-i )only

Press K2 to shift to the timing setting that you want to close.

To save energy and prolong the using time of the emitter, we advise you press 0.5S and press in 1s interval.

Short press K2 to enter smart position mode.

9.Emitter With Timer Function

04.timing channel hiding

05.Stopwatch function

Press K1 to enter time mode. The

hour figures will shine. Press UP or

DOWN to set.

Press K1 again. The minutes will

shine. Press UP or DOWN to set.

Press K1 again. The weekend will shine.

Press UP or DOWN to set.

Press STOP to final confirm.

Press K2 to enter timing mode. There will be . you can set at most 16 open&close time.Press K2 to shift between them.

Press K2 to enter timing mode. Press K2 again to number the

timing setting. You can number

it by 1,2,3...16.

Press K3 once to activate time setting. Press K3 again to choose channel.

After choosing the channel, press K1

to set time. Please refer to “01 time

setting” to check how to set time.

If you want to set more timing, press K2 to start again.

When you finish setting, press

STOP to final confirm.

03.Close timing

Press K2 to enter timing mode. Long Press K3 until the screen shows as above. The timing is closed. PressK3 again to restore.

When you finish, press STOP to final confirm.

Press K1 and K3 simultaneously to enter

hiding mode. The screen will show “CS”.

Press K1 to hide channels.

Press K3 to show again.

Short press UP or STOP or DOWN to

final confirm. The screen will show“ ”.

Hide the timing function until there

is only one channel. Press K3 to enter stopwatch mode.

Press K3 to final confirm.

when you have timing setting, be sure there is a clock on the screen. Otherwise it will be invalid. You can get quick access to timing mode by long press STOP and press K2 once.

The emitter stops work when battery is used up. Please change battery.

01. single smart position mode

Note: please set the limit before using smart position.

Short press K2 to enter smart position mode. Press K2 again to choose a channel. Press K1 or K3 to control the percentage. The blinds will stop at the position according

to the percentage.

01. Multi-channel mode

Choose a channel referring to 6 Multi-channel control (screen emitter) .

Press K1 or K3 to control the percentage. The blinds will stop at the position according to the percentage.